Re: [Repeater-Builder] RC-96 EEPROM
On Mon, 30 Aug 2004 08:11:25 -0500, Bryon Jeffers K0BSJ wrote: I attempted to get the binary info out of my U30 and found it was blank. Seems I'm having the same problem here as well Bryon. Does the controller boot normally with that eeprom in place? I have verified that the eprom programmer works on all the other eproms I check this weekend I'm starting to think that the 6264 is slightly different from a standard 2864, but the 2864 works in it's place?? This was a private email to me, so I hope you don't mind me sending it to the list Bryon. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] RC-96 EEPROM
Yes the controller boots fine and functions as it should... Very strange the I see the 6264 blank as you do. Maybe someone else will have some input on this? Bryon K0BSJ At 10:11 AM 8/30/2004, you wrote: On Mon, 30 Aug 2004 08:11:25 -0500, Bryon Jeffers K0BSJ wrote: I attempted to get the binary info out of my U30 and found it was blank. Seems I'm having the same problem here as well Bryon. Does the controller boot normally with that eeprom in place? I have verified that the eprom programmer works on all the other eproms I check this weekend I'm starting to think that the 6264 is slightly different from a standard 2864, but the 2864 works in it's place?? This was a private email to me, so I hope you don't mind me sending it to the list Bryon. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] RC-96 EEPROM
Hey folks, A 6264 is an 8K X 8 CMOS Static RAM..when you unplug it, it loses all data. The 2864 is an 8K X 8 CMOS EEPROM...does not lose data when unplugged. They are completely different Ron Rogers WW8RR (previously WB8ERB) -Original Message- From: Bryon Jeffers K0BSJ [mailto:[EMAIL PROTECTED] Sent: Monday, August 30, 2004 11:56 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] RC-96 EEPROM Yes the controller boots fine and functions as it should... Very strange the I see the 6264 blank as you do. Maybe someone else will have some input on this? Bryon K0BSJ At 10:11 AM 8/30/2004, you wrote: On Mon, 30 Aug 2004 08:11:25 -0500, Bryon Jeffers K0BSJ wrote: I attempted to get the binary info out of my U30 and found it was blank. Seems I'm having the same problem here as well Bryon. Does the controller boot normally with that eeprom in place? I have verified that the eprom programmer works on all the other eproms I check this weekend I'm starting to think that the 6264 is slightly different from a standard 2864, but the 2864 works in it's place?? This was a private email to me, so I hope you don't mind me sending it to the list Bryon. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
