Re: [Repeater-Builder] E.F. JOHNSON radio
At 07:27 AM 17/03/2010, you wrote: >A slight word of caution: there were 3 versions of the Challengers: one >that used a DOS PC to program, one that used a Commodore 64 to program, >and one that used...I think either a TRS-80 or a Timex-Sinclair to >program. If you have one of the last 2, there were special modules for >interfacing to the radio-good luck finding one! Most likely you'd have >to change out the logic board for a PC-based board. >There weren't a LOT of them, they were only made early on, but they are >out there (a former employer had quite a few C-64 style, because he was >a Commodore fan.) > > >On 3/16/2010 10:32 PM, Doug wrote: > > At 06:03 PM 16/03/2010, you wrote: > >> EF Johnson Challenger 7152A? > >> > >> VHF 55W > >> > >> http://www.repeater-builder.com/johnson/efj-index.html > >> > >> http://www.ccdx.org/zedyx/mods/challenger.htm > >> > >> On Tue, Mar 16, 2010 at 3:43 PM, Doug wrote: > >>> I have a vhf radio presently on 162mhz made by E.F Johnson. > >>> It is a small unit, but I can't find a combo. It has a > >>> FCC ID ATH90F2427152. The number is very faded and hard > >>> to read. > >>> > >>> Can anyone tell me anything about these. Are the useful > >>> for hams and how can they be programmed. > > --- > > I think you are right on.. I googled 7152 and found a chap who > > was doing the uhf version. The radios look exactly the same. So > > I guess most of the pin outs and mic connections will be also. > > Now I have to find a schematic and a little info on how do you > > program them... > > > > Thanks very much.. > > > > 73 Doug > > > By looking at the serial number, it appears the units are a 7164. Now I have to find the programming software. It runs under dos I understand.. Thanks Doug
Re: [Repeater-Builder] E.F. JOHNSON radio
A slight word of caution: there were 3 versions of the Challengers: one that used a DOS PC to program, one that used a Commodore 64 to program, and one that used...I think either a TRS-80 or a Timex-Sinclair to program. If you have one of the last 2, there were special modules for interfacing to the radio-good luck finding one! Most likely you'd have to change out the logic board for a PC-based board. There weren't a LOT of them, they were only made early on, but they are out there (a former employer had quite a few C-64 style, because he was a Commodore fan.) On 3/16/2010 10:32 PM, Doug wrote: > At 06:03 PM 16/03/2010, you wrote: >> EF Johnson Challenger 7152A? >> >> VHF 55W >> >> http://www.repeater-builder.com/johnson/efj-index.html >> >> http://www.ccdx.org/zedyx/mods/challenger.htm >> >> On Tue, Mar 16, 2010 at 3:43 PM, Doug wrote: >>> I have a vhf radio presently on 162mhz made by E.F Johnson. >>> It is a small unit, but I can't find a combo. It has a >>> FCC ID ATH90F2427152. The number is very faded and hard >>> to read. >>> >>> Can anyone tell me anything about these. Are the useful >>> for hams and how can they be programmed. > --- > I think you are right on.. I googled 7152 and found a chap who > was doing the uhf version. The radios look exactly the same. So > I guess most of the pin outs and mic connections will be also. > Now I have to find a schematic and a little info on how do you > program them... > > Thanks very much.. > > 73 Doug
Re: [Repeater-Builder] E.F. JOHNSON radio
Looks like a 7152 -PC Programmable w/ proper software. Ed Com/Rad Inc - Original Message - From: Doug To: Repeater-Builder@yahoogroups.com Sent: Tuesday, March 16, 2010 5:43 PM Subject: [Repeater-Builder] E.F. JOHNSON radio I have a vhf radio presently on 162mhz made by E.F Johnson. It is a small unit, but I can't find a combo. It has a FCC ID ATH90F2427152. The number is very faded and hard to read. Can anyone tell me anything about these. Are the useful for hams and how can they be programmed. Thanks Doug VE5DA
Re: [Repeater-Builder] E.F. JOHNSON radio
At 06:03 PM 16/03/2010, you wrote: >EF Johnson Challenger 7152A? > >VHF 55W > >http://www.repeater-builder.com/johnson/efj-index.html > >http://www.ccdx.org/zedyx/mods/challenger.htm > >On Tue, Mar 16, 2010 at 3:43 PM, Doug wrote: > > I have a vhf radio presently on 162mhz made by E.F Johnson. > > It is a small unit, but I can't find a combo. It has a > > FCC ID ATH90F2427152. The number is very faded and hard > > to read. > > > > Can anyone tell me anything about these. Are the useful > > for hams and how can they be programmed. --- I think you are right on.. I googled 7152 and found a chap who was doing the uhf version. The radios look exactly the same. So I guess most of the pin outs and mic connections will be also. Now I have to find a schematic and a little info on how do you program them... Thanks very much.. 73 Doug
Re: [Repeater-Builder] E.F. JOHNSON radio
EF Johnson Challenger 7152A? VHF 55W http://www.repeater-builder.com/johnson/efj-index.html http://www.ccdx.org/zedyx/mods/challenger.htm On Tue, Mar 16, 2010 at 3:43 PM, Doug wrote: > I have a vhf radio presently on 162mhz made by E.F Johnson. > It is a small unit, but I can't find a combo. It has a > FCC ID ATH90F2427152. The number is very faded and hard > to read. > > Can anyone tell me anything about these. Are the useful > for hams and how can they be programmed. > > Thanks > Doug VE5DA > > > > > > > > > Yahoo! Groups Links > > > >
