Re: Mac CPU upgrades?
but why would anybody want a G3 upgrade card from a company other than Newer Tech Eric Ullman wrote: Hi Al, A little over a year ago, there was a data corruption issue with G3 upgrade cards from companies *other* than Newer Tech. Since then, software upgrades from those companies corrected the problem. For more specific information, we have a tech note on our website: http://www.dantz.com/index.php3?SCREEN=tn408 Eric Ullman Dantz Development Al Byrne [EMAIL PROTECTED] wrote: I seem to remember that there were/are issues with hardware accelerators and Retrospect. I'm considering upgrading my beige G3/266DT with a Sonnet ZIF G3/500 CPU - so it is pretty much a case of 'just drop it in and reboot'. I've just been for a surf over to www.dantz.com, and have had no joy finding information on the subject. Can someone update me on the issues? FWIW: we are using Retro 4.2 to back up an iBook (via ethernet), and the G3 primary HD, to an extra internal HD installed in the G3. Both run OS 9.0.4. -- -- To subscribe:[EMAIL PROTECTED] To unsubscribe: [EMAIL PROTECTED] Archives:http://list.working-dogs.com/lists/retro-talk/ Problems?: [EMAIL PROTECTED] -- top of the world, Luke Jaeger, Technology Coordinator Disney Magazine Publishing Northampton, Massachusetts [EMAIL PROTECTED] Any opinions expressed in this message are my own and may not represent the opinions of Disney Publishing, etc etc etc. * -- -- To subscribe:[EMAIL PROTECTED] To unsubscribe: [EMAIL PROTECTED] Archives:http://list.working-dogs.com/lists/retro-talk/ Problems?: [EMAIL PROTECTED]
Re: AIT Autoloader on NT
have you tried unloading, rebooting and reloading the drivers? - Original Message - From: "Dean Brissinger" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, May 30, 2000 10:57 AM Subject: AIT Autoloader on NT Heya, I've got a Sony AIT autoloader (TSL-SA300C) which works great on the Mac. I have an identical drive that I'm trying to get to work on Windows NT with Retrospect. Problem is, on WinNT (4.0 SP6a) the drive isn't seen by Windows. The confusing part is that everything was working fine until I had a power outage last week. Now WinNT boots up and tells me the "DoctrSys" service failed to load and my AIT drive doesn't show up to the operating system. The device is working fine and I can send SCSI commands to it if I boot to DOS. Anyone have experience with devices disappearing after power outages? -- . . . . . . . . ooo . . . . ooo . . . . . . . . . . . .Dean Brissinger - Systems Administrator. . Direct: 303-583-0278 Main: 303-444-0094 . . Fax: 303-444-0470 http://www.vexcel.com/ . . . . . . . . . . oOOo . . A . . oOOo . . . . . . . . 0 0 ' -- -- To subscribe:[EMAIL PROTECTED] To unsubscribe: [EMAIL PROTECTED] Archives:http://list.working-dogs.com/lists/retro-talk/ Problems?: [EMAIL PROTECTED] -- -- To subscribe:[EMAIL PROTECTED] To unsubscribe: [EMAIL PROTECTED] Archives:http://list.working-dogs.com/lists/retro-talk/ Problems?: [EMAIL PROTECTED]
Re: AIT Autoloader on NT
The SCSI drivers are also responsible for my boot disk. So no. I can't unload them. I did upgrade to the latest Adaptec 2940UW drivers though. have you tried unloading, rebooting and reloading the drivers? - Original Message - From: "Dean Brissinger" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, May 30, 2000 10:57 AM Subject: AIT Autoloader on NT Heya, I've got a Sony AIT autoloader (TSL-SA300C) which works great on the Mac. I have an identical drive that I'm trying to get to work on Windows NT with Retrospect. Problem is, on WinNT (4.0 SP6a) the drive isn't seen by Windows. The confusing part is that everything was working fine until I had a power outage last week. Now WinNT boots up and tells me the "DoctrSys" service failed to load and my AIT drive doesn't show up to the operating system. The device is working fine and I can send SCSI commands to it if I boot to DOS. Anyone have experience with devices disappearing after power outages? -- . . . . . . . . ooo . . . . ooo . . . . . . . . . . . .Dean Brissinger - Systems Administrator. . Direct: 303-583-0278 Main: 303-444-0094 . . Fax: 303-444-0470 http://www.vexcel.com/ . . . . . . . . . . oOOo . . A . . oOOo . . . . . . . . 0 0 ' -- -- To subscribe:[EMAIL PROTECTED] To unsubscribe: [EMAIL PROTECTED] Archives:http://list.working-dogs.com/lists/retro-talk/ Problems?: [EMAIL PROTECTED] -- -- To subscribe:[EMAIL PROTECTED] To unsubscribe: [EMAIL PROTECTED] Archives:http://list.working-dogs.com/lists/retro-talk/ Problems?: [EMAIL PROTECTED] -- . . . . . . . . ooo . . . . ooo . . . . . . . . . . . .Dean Brissinger - Systems Administrator. . Direct: 303-583-0278 Main: 303-444-0094 . . Fax: 303-444-0470 http://www.vexcel.com/ . . . . . . . . . . oOOo . . A . . oOOo . . . . . . . . 0 0 ' -- -- To subscribe:[EMAIL PROTECTED] To unsubscribe: [EMAIL PROTECTED] Archives:http://list.working-dogs.com/lists/retro-talk/ Problems?: [EMAIL PROTECTED]
