Re: Riak S2 error

2016-01-08 Thread Michael Walsh 
That was the first thing I checked. Good thought though.

On Fri, Jan 8, 2016 at 9:07 AM, Luke Bakken  wrote:

> Hi Michael,
>
> Please ensure that /usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin actually
> is the correct path to the *.beam files. This is a
> distribution-dependent path, and may be
> /usr/lib/riak-cs/lib/riak_cs-2.1.0/ebin
>
> --
> Luke Bakken
> Engineer
> lbak...@basho.com
>
> On Fri, Jan 8, 2016 at 8:52 AM, Michael Walsh 
> wrote:
> > That definitely fixed the configuration problem, but now its tossing a
> > riak_cs_kv_multi_backend is non-loadable. So I'll dig into riak_cs some
> more
> > to try to see what could be wrong there, although it is not reporting any
> > errors while running.
> >
> > On Thu, Jan 7, 2016 at 3:12 PM, Charlie Voiselle 
> > wrote:
> >>
> >> Michael:
> >>
> >> If that is the entire contents of your advanced.config file, you will
> need
> >> to wrap all of that in an erlang list delimiter. [].  For example
> >>
> >> [
> >> {riak_kv, [
> >> {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
> >> {storage_backend, riak_cs_kv_multi_backend},
> >> {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
> >> {multi_backend_default, be_default},
> >> {multi_backend, [
> >> {be_default, riak_kv_eleveldb_backend, [
> >> {total_leveldb_mem_percent, 30},
> >> {data_root, "/var/lib/riak/leveldb"}
> >> ]},
> >> {be_blocks, riak_kv_bitcask_backend, [
> >> {data_root, "/var/lib/riak/bitcask"}
> >> ]}
> >> ]}
> >> ]}
> >> ].
> >>
> >>
> >> Give that a shot and let us know if it works for you!
> >>
> >> Thanks,
> >> Charlie Voiselle
> >>
> >> On Jan 7, 2016, at 11:53 AM, Michael Walsh 
> wrote:
> >>
> >> Sure thing.
> >>
> >> And thanks!
> >>
> >>
> >> advanced.config:
> >> {riak_kv, [
> >> {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
> >> {storage_backend, riak_cs_kv_multi_backend},
> >> {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
> >> {multi_backend_default, be_default},
> >> {multi_backend, [
> >> {be_default, riak_kv_eleveldb_backend, [
> >> {total_leveldb_mem_percent, 30},
> >> {data_root, "/var/lib/riak/leveldb"}
> >> ]},
> >> {be_blocks, riak_kv_bitcask_backend, [
> >> {data_root, "/var/lib/riak/bitcask"}
> >> ]}
> >> ]}
> >> ]}.
> >>
> >> On Wed, Jan 6, 2016 at 5:44 PM, Shunichi Shinohara 
> >> wrote:
> >>>
> >>> Hi Michael,
> >>>
> >>> Could you provide all the result of "riak config generate -l debug" as
> >>> well as
> >>> riak.conf and advanced.config?
> >>>
> >>> Thanks,
> >>> Shino
> >>>
> >>> 2016-01-07 9:05 GMT+09:00 Michael Walsh :
> >>> > All,
> >>> >
> >>> > I'm trying to set up a RIak S2 instance to integrate with KV and I'm
> >>> > getting
> >>> > the following cuttlefish error out of advanced.config. Any
> suggestions
> >>> > on
> >>> > where I'm going wrong?
> >>> >
> >>> > notes: erlang error was fixed. All paths are correct.
> >>> >
> >>> > Thanks!
> >>> >
> >>> > -Michael Walsh
> >>> >
> >>> > $riak config generate -l debug
> >>> >
> >>> > ...
> >>> >  {riak_kv,
> >>> >   [{add_paths,
> >>> >
> >>> > "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
> >>> >
> >>> > {storage_backend,riak_cs_kv_multi_backend},
> >>> >{multi_backend_prefix_list,
> >>> > [{<<"0b:">>,be_blocks}]},
> >>> >{multi_backend_default,be_default},
> >>> >{multi_backend,
> >>> >
>  [{be_default,riak_kv_eleveldb_backend,
> >>> >   [{total_leveldb_mem_percent,30},
> >>> >
> >>> > {data_root,"/var/lib/riak/leveldb"}]},
> >>> >  {be_blocks,riak_kv_bitcask_backend,
> >>> >
> >>> > [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
> >>> >   in function  cuttlefish_escript:engage_cuttlefish/1
> >>> > (src/cuttlefish_escript.erl, line 375)
> >>> >   in call from cuttlefish_escript:generate/1
> >>> > (src/cuttlefish_escript.erl,
> >>> > line 258)
> >>> >   in call from escript:run/2 (escript.erl, line 747)
> >>> >   in call from escript:start/1 (escript.erl, line 277)
> >>> >   in call from init:start_it/1
> >>> >   in call from init:start_em/1
> >>> >
> >>> > ___
> >>> > riak-users mailing list
> >>> > riak-users@lists.basho.com
> >>> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
> >>> >
> >>
> >>
> >>
> >>
> ___
> >> riak-users mailing list
> >> riak-users@lists.basho.com
> >> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
> >>
> >>
> >
> >
> >

Re: Riak S2 error

2016-01-08 Thread Michael Walsh 
That definitely fixed the configuration problem, but now its tossing a
riak_cs_kv_multi_backend is non-loadable. So I'll dig into riak_cs some
more to try to see what could be wrong there, although it is not reporting
any errors while running.

On Thu, Jan 7, 2016 at 3:12 PM, Charlie Voiselle 
wrote:

> Michael:
>
> If that is the entire contents of your advanced.config file, you will need
> to wrap all of that in an erlang list delimiter. [].  For example
>
> [
> {riak_kv, [
> {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
> {storage_backend, riak_cs_kv_multi_backend},
> {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
> {multi_backend_default, be_default},
> {multi_backend, [
> {be_default, riak_kv_eleveldb_backend, [
> {total_leveldb_mem_percent, 30},
> {data_root, "/var/lib/riak/leveldb"}
> ]},
> {be_blocks, riak_kv_bitcask_backend, [
> {data_root, "/var/lib/riak/bitcask"}
> ]}
> ]}
> ]}
> ].
>
>
> Give that a shot and let us know if it works for you!
>
> Thanks,
> Charlie Voiselle
>
> On Jan 7, 2016, at 11:53 AM, Michael Walsh  wrote:
>
> Sure thing.
>
> And thanks!
>
>
> advanced.config:
> {riak_kv, [
> {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
> {storage_backend, riak_cs_kv_multi_backend},
> {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
> {multi_backend_default, be_default},
> {multi_backend, [
> {be_default, riak_kv_eleveldb_backend, [
> {total_leveldb_mem_percent, 30},
> {data_root, "/var/lib/riak/leveldb"}
> ]},
> {be_blocks, riak_kv_bitcask_backend, [
> {data_root, "/var/lib/riak/bitcask"}
> ]}
> ]}
> ]}.
>
> On Wed, Jan 6, 2016 at 5:44 PM, Shunichi Shinohara 
> wrote:
>
>> Hi Michael,
>>
>> Could you provide all the result of "riak config generate -l debug" as
>> well as
>> riak.conf and advanced.config?
>>
>> Thanks,
>> Shino
>>
>> 2016-01-07 9:05 GMT+09:00 Michael Walsh :
>> > All,
>> >
>> > I'm trying to set up a RIak S2 instance to integrate with KV and I'm
>> getting
>> > the following cuttlefish error out of advanced.config. Any suggestions
>> on
>> > where I'm going wrong?
>> >
>> > notes: erlang error was fixed. All paths are correct.
>> >
>> > Thanks!
>> >
>> > -Michael Walsh
>> >
>> > $riak config generate -l debug
>> >
>> > ...
>> >  {riak_kv,
>> >   [{add_paths,
>> >
>> > "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>> >
>> {storage_backend,riak_cs_kv_multi_backend},
>> >{multi_backend_prefix_list,
>> > [{<<"0b:">>,be_blocks}]},
>> >{multi_backend_default,be_default},
>> >{multi_backend,
>> > [{be_default,riak_kv_eleveldb_backend,
>> >   [{total_leveldb_mem_percent,30},
>> >
>> {data_root,"/var/lib/riak/leveldb"}]},
>> >  {be_blocks,riak_kv_bitcask_backend,
>> >
>> > [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
>> >   in function  cuttlefish_escript:engage_cuttlefish/1
>> > (src/cuttlefish_escript.erl, line 375)
>> >   in call from cuttlefish_escript:generate/1
>> (src/cuttlefish_escript.erl,
>> > line 258)
>> >   in call from escript:run/2 (escript.erl, line 747)
>> >   in call from escript:start/1 (escript.erl, line 277)
>> >   in call from init:start_it/1
>> >   in call from init:start_em/1
>> >
>> > ___
>> > riak-users mailing list
>> > riak-users@lists.basho.com
>> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>> >
>>
>
> 
> ___
> riak-users mailing list
> riak-users@lists.basho.com
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>
>
>
___
riak-users mailing list
riak-users@lists.basho.com
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com

Re: Riak S2 error

2016-01-08 Thread Luke Bakken 
Hi Michael,

Please ensure that /usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin actually
is the correct path to the *.beam files. This is a
distribution-dependent path, and may be
/usr/lib/riak-cs/lib/riak_cs-2.1.0/ebin

--
Luke Bakken
Engineer
lbak...@basho.com

On Fri, Jan 8, 2016 at 8:52 AM, Michael Walsh  wrote:
> That definitely fixed the configuration problem, but now its tossing a
> riak_cs_kv_multi_backend is non-loadable. So I'll dig into riak_cs some more
> to try to see what could be wrong there, although it is not reporting any
> errors while running.
>
> On Thu, Jan 7, 2016 at 3:12 PM, Charlie Voiselle 
> wrote:
>>
>> Michael:
>>
>> If that is the entire contents of your advanced.config file, you will need
>> to wrap all of that in an erlang list delimiter. [].  For example
>>
>> [
>> {riak_kv, [
>> {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>> {storage_backend, riak_cs_kv_multi_backend},
>> {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
>> {multi_backend_default, be_default},
>> {multi_backend, [
>> {be_default, riak_kv_eleveldb_backend, [
>> {total_leveldb_mem_percent, 30},
>> {data_root, "/var/lib/riak/leveldb"}
>> ]},
>> {be_blocks, riak_kv_bitcask_backend, [
>> {data_root, "/var/lib/riak/bitcask"}
>> ]}
>> ]}
>> ]}
>> ].
>>
>>
>> Give that a shot and let us know if it works for you!
>>
>> Thanks,
>> Charlie Voiselle
>>
>> On Jan 7, 2016, at 11:53 AM, Michael Walsh  wrote:
>>
>> Sure thing.
>>
>> And thanks!
>>
>>
>> advanced.config:
>> {riak_kv, [
>> {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>> {storage_backend, riak_cs_kv_multi_backend},
>> {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
>> {multi_backend_default, be_default},
>> {multi_backend, [
>> {be_default, riak_kv_eleveldb_backend, [
>> {total_leveldb_mem_percent, 30},
>> {data_root, "/var/lib/riak/leveldb"}
>> ]},
>> {be_blocks, riak_kv_bitcask_backend, [
>> {data_root, "/var/lib/riak/bitcask"}
>> ]}
>> ]}
>> ]}.
>>
>> On Wed, Jan 6, 2016 at 5:44 PM, Shunichi Shinohara 
>> wrote:
>>>
>>> Hi Michael,
>>>
>>> Could you provide all the result of "riak config generate -l debug" as
>>> well as
>>> riak.conf and advanced.config?
>>>
>>> Thanks,
>>> Shino
>>>
>>> 2016-01-07 9:05 GMT+09:00 Michael Walsh :
>>> > All,
>>> >
>>> > I'm trying to set up a RIak S2 instance to integrate with KV and I'm
>>> > getting
>>> > the following cuttlefish error out of advanced.config. Any suggestions
>>> > on
>>> > where I'm going wrong?
>>> >
>>> > notes: erlang error was fixed. All paths are correct.
>>> >
>>> > Thanks!
>>> >
>>> > -Michael Walsh
>>> >
>>> > $riak config generate -l debug
>>> >
>>> > ...
>>> >  {riak_kv,
>>> >   [{add_paths,
>>> >
>>> > "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>>> >
>>> > {storage_backend,riak_cs_kv_multi_backend},
>>> >{multi_backend_prefix_list,
>>> > [{<<"0b:">>,be_blocks}]},
>>> >{multi_backend_default,be_default},
>>> >{multi_backend,
>>> > [{be_default,riak_kv_eleveldb_backend,
>>> >   [{total_leveldb_mem_percent,30},
>>> >
>>> > {data_root,"/var/lib/riak/leveldb"}]},
>>> >  {be_blocks,riak_kv_bitcask_backend,
>>> >
>>> > [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
>>> >   in function  cuttlefish_escript:engage_cuttlefish/1
>>> > (src/cuttlefish_escript.erl, line 375)
>>> >   in call from cuttlefish_escript:generate/1
>>> > (src/cuttlefish_escript.erl,
>>> > line 258)
>>> >   in call from escript:run/2 (escript.erl, line 747)
>>> >   in call from escript:start/1 (escript.erl, line 277)
>>> >   in call from init:start_it/1
>>> >   in call from init:start_em/1
>>> >
>>> > ___
>>> > riak-users mailing list
>>> > riak-users@lists.basho.com
>>> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>>> >
>>
>>
>>
>> ___
>> riak-users mailing list
>> riak-users@lists.basho.com
>> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>>
>>
>
>
> ___
> riak-users mailing list
> riak-users@lists.basho.com
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>

___
riak-users mailing list
riak-users@lists.basho.com
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com

Re: Riak S2 error

2016-01-07 Thread Charlie Voiselle 
Michael:

If that is the entire contents of your advanced.config file, you will need to 
wrap all of that in an erlang list delimiter. [].  For example

[
{riak_kv, [
{add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
{storage_backend, riak_cs_kv_multi_backend},
{multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
{multi_backend_default, be_default},
{multi_backend, [
{be_default, riak_kv_eleveldb_backend, [
{total_leveldb_mem_percent, 30},
{data_root, "/var/lib/riak/leveldb"}
]},
{be_blocks, riak_kv_bitcask_backend, [
{data_root, "/var/lib/riak/bitcask"}
]}
]}
]}
].


Give that a shot and let us know if it works for you!

Thanks,
Charlie Voiselle

> On Jan 7, 2016, at 11:53 AM, Michael Walsh  wrote:
> 
> Sure thing.
> 
> And thanks!
> 
> 
> advanced.config:
> {riak_kv, [
> {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
> {storage_backend, riak_cs_kv_multi_backend},
> {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
> {multi_backend_default, be_default},
> {multi_backend, [
> {be_default, riak_kv_eleveldb_backend, [
> {total_leveldb_mem_percent, 30},
> {data_root, "/var/lib/riak/leveldb"}
> ]},
> {be_blocks, riak_kv_bitcask_backend, [
> {data_root, "/var/lib/riak/bitcask"}
> ]}
> ]}
> ]}.
> 
> On Wed, Jan 6, 2016 at 5:44 PM, Shunichi Shinohara  > wrote:
> Hi Michael,
> 
> Could you provide all the result of "riak config generate -l debug" as well as
> riak.conf and advanced.config?
> 
> Thanks,
> Shino
> 
> 2016-01-07 9:05 GMT+09:00 Michael Walsh  >:
> > All,
> >
> > I'm trying to set up a RIak S2 instance to integrate with KV and I'm getting
> > the following cuttlefish error out of advanced.config. Any suggestions on
> > where I'm going wrong?
> >
> > notes: erlang error was fixed. All paths are correct.
> >
> > Thanks!
> >
> > -Michael Walsh
> >
> > $riak config generate -l debug
> >
> > ...
> >  {riak_kv,
> >   [{add_paths,
> >
> > "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
> >{storage_backend,riak_cs_kv_multi_backend},
> >{multi_backend_prefix_list,
> > [{<<"0b:">>,be_blocks}]},
> >{multi_backend_default,be_default},
> >{multi_backend,
> > [{be_default,riak_kv_eleveldb_backend,
> >   [{total_leveldb_mem_percent,30},
> >{data_root,"/var/lib/riak/leveldb"}]},
> >  {be_blocks,riak_kv_bitcask_backend,
> >
> > [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
> >   in function  cuttlefish_escript:engage_cuttlefish/1
> > (src/cuttlefish_escript.erl, line 375)
> >   in call from cuttlefish_escript:generate/1 (src/cuttlefish_escript.erl,
> > line 258)
> >   in call from escript:run/2 (escript.erl, line 747)
> >   in call from escript:start/1 (escript.erl, line 277)
> >   in call from init:start_it/1
> >   in call from init:start_em/1
> >
> > ___
> > riak-users mailing list
> > riak-users@lists.basho.com 
> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com 
> > 
> >
> 
> ___
> riak-users mailing list
> riak-users@lists.basho.com 
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com 
> 
___
riak-users mailing list
riak-users@lists.basho.com
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com

Riak S2 error

2016-01-06 Thread Michael Walsh 
All,

I'm trying to set up a RIak S2 instance to integrate with KV and I'm
getting the following cuttlefish error out of advanced.config. Any
suggestions on where I'm going wrong?

notes: erlang error was fixed. All paths are correct.

Thanks!

-Michael Walsh

$riak config generate -l debug

...
 {riak_kv,
  [{add_paths,

"/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
   {storage_backend,riak_cs_kv_multi_backend},
   {multi_backend_prefix_list,
[{<<"0b:">>,be_blocks}]},
   {multi_backend_default,be_default},
   {multi_backend,
[{be_default,riak_kv_eleveldb_backend,
  [{total_leveldb_mem_percent,30},
   {data_root,"/var/lib/riak/leveldb"}]},
 {be_blocks,riak_kv_bitcask_backend,

[{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
  in function  cuttlefish_escript:engage_cuttlefish/1
(src/cuttlefish_escript.erl, line 375)
  in call from cuttlefish_escript:generate/1 (src/cuttlefish_escript.erl,
line 258)
  in call from escript:run/2 (escript.erl, line 747)
  in call from escript:start/1 (escript.erl, line 277)
  in call from init:start_it/1
  in call from init:start_em/1
___
riak-users mailing list
riak-users@lists.basho.com
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com

Re: Riak S2 error

2016-01-06 Thread Shunichi Shinohara 
Hi Michael,

Could you provide all the result of "riak config generate -l debug" as well as
riak.conf and advanced.config?

Thanks,
Shino

2016-01-07 9:05 GMT+09:00 Michael Walsh :
> All,
>
> I'm trying to set up a RIak S2 instance to integrate with KV and I'm getting
> the following cuttlefish error out of advanced.config. Any suggestions on
> where I'm going wrong?
>
> notes: erlang error was fixed. All paths are correct.
>
> Thanks!
>
> -Michael Walsh
>
> $riak config generate -l debug
>
> ...
>  {riak_kv,
>   [{add_paths,
>
> "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>{storage_backend,riak_cs_kv_multi_backend},
>{multi_backend_prefix_list,
> [{<<"0b:">>,be_blocks}]},
>{multi_backend_default,be_default},
>{multi_backend,
> [{be_default,riak_kv_eleveldb_backend,
>   [{total_leveldb_mem_percent,30},
>{data_root,"/var/lib/riak/leveldb"}]},
>  {be_blocks,riak_kv_bitcask_backend,
>
> [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
>   in function  cuttlefish_escript:engage_cuttlefish/1
> (src/cuttlefish_escript.erl, line 375)
>   in call from cuttlefish_escript:generate/1 (src/cuttlefish_escript.erl,
> line 258)
>   in call from escript:run/2 (escript.erl, line 747)
>   in call from escript:start/1 (escript.erl, line 277)
>   in call from init:start_it/1
>   in call from init:start_em/1
>
> ___
> riak-users mailing list
> riak-users@lists.basho.com
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>

___
riak-users mailing list
riak-users@lists.basho.com
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com