[Samba] Samba 4 and password policy pwsetting error
Hello, When I tried to change the password policy on a samba 4 domain controller I get the following error. r...@server01:/usr/local/samba/lib/python2.6/site-packages/samba/netcmd# ./pwsettings.py --complexity=off Traceback (most recent call last): File ./pwsettings.py, line 25, in module import samba.getopt as options ImportError: No module named samba.getopt r...@lcsdc01:/usr/local/samba/lib/python2.6/site-packages/samba/netcmd# What am I doing wrong when running this command? Thanks -Glenn -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Samba 4 and password policy pwsetting error
Luk, Thanks that is what I needed. I did internet search on the proper syntax for the command and just could not figure out how run the command. -Glenn - Original Message - From: Lukasz Zalewski lu...@dcs.qmul.ac.uk To: Glenn T. Arnold garn...@unrealsolutions.com Cc: samba samba@lists.samba.org Sent: Thursday, August 26, 2010 1:06:13 PM Subject: Re: [Samba] Samba 4 and password policy pwsetting error On 08/26/2010 05:51 PM, Glenn T. Arnold wrote: Hello, When I tried to change the password policy on a samba 4 domain controller I get the following error. r...@server01:/usr/local/samba/lib/python2.6/site-packages/samba/netcmd# ./pwsettings.py --complexity=off Traceback (most recent call last): File ./pwsettings.py, line 25, inmodule import samba.getopt as options ImportError: No module named samba.getopt r...@lcsdc01:/usr/local/samba/lib/python2.6/site-packages/samba/netcmd# What am I doing wrong when running this command? Thanks -Glenn Glenn, run it as follows: /usr/local/samba/bin/net pwsettings your options HTH Luk -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] printcap cache time using registry config on Ubuntu 9.04 samba 3.3.2
I went back to smb.conf file instead of registry, because the printers were delayed showing when you browsed for the server on the network or if the printer is already connected it would take a while tell the printer would say ready instead of opening. when using the registry config. Has anybody seen this before? Thanks -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: Samba samba@lists.samba.org Sent: Tuesday, January 12, 2010 4:17:47 PM Subject: [Samba] printcap cache time using registry config on Ubuntu 9.04 samba 3.3.2 I have been reading the man page on printcap cache time setting and have some questions. How much load does this put on a server if you have the setting less then 60? The reason I have this setting less than 60 is when I use an all registry samba configuration the printers do not show up if you browse the server or when you goto the Windows XP pc with the printer already connect shows printer status opening, but if you wait the default time period that samba sets for the printcap cache time the printer will eventually show up under the server. When I used the smb.conf file I did not observer this behavior. The reason I am using the all registry conf is to save some memory on the server. I have observed this behavior on another customers server with the same version ubuntu. The printcap cache time setting less than 60 seems to fix the issue or mask the issue enough to be liveable, but I want to make sure that I am not missing anything in configuring samba. Here is my config. [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\global] server string= dos charset=850 unix charset=ISO8859-1 workgroup=MYDOMAIN interfaces=bond0, lo passdb backend=ldapsam:ldap://myserver01.mthcs.net; passwd program=/usr/sbin//smbldap-passwd %u username map=/etc/samba/smbusers syslog=0 time server=Yes socket options=IPTOS_THROUGHPUT TCP_NODELAY add user script=/usr/sbin//smbldap-useradd -m \%u\ delete user script=/usr/sbin//smbldap-userdel \%u\ add group script=/usr/sbin//smbldap-groupadd -p \%g\ delete group script=/usr/sbin//smbldap-groupdel \%g\ add user to group script=/usr/sbin//smbldap-groupmod -m \%u\ \%g\ delete user from group script=/usr/sbin//smbldap-groupmod -x \%u\ \%g\ set primary group script=/usr/sbin//smbldap-usermod -g \%g\ \%u\ add machine script=/usr/sbin//smbldap-useradd -w \%u\ logon script=wkix32.exe logon.kix logon path= logon drive=h: logon home= domain logons=Yes os level=60 preferred master=Yes domain master=No wins server=10.100.0.10 lanman auth=yes ldap admin dn=cn=admin,dc=mthcs,dc=net ldap delete dn=Yes ldap group suffix=ou=Groups ldap idmap suffix=ou=Users ldap machine suffix=ou=Computers ldap passwd sync=Yes ldap suffix=dc=mthcs,dc=net ldap user suffix=ou=Users ldap ssl=no add share command=/usr/bin/modify_samba_config.pl change share command=/usr/bin/modify_samba_config.pl delete share command=/usr/bin/modify_samba_config.pl utmp=Yes idmap uid=1-2 idmap gid=1-2 printing=cups printcap name=cups force printername=Yes default devmode=no wins support=no smb ports=139 usershare max shares=0 log level=0 printcap cache time=30 [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\print$] comment=Printer Drivers path=/var/lib/samba/printers write list=\@Domain Admins\, root [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\printers] comment=All Printers path=/var/spool/samba guest ok=Yes printable=Yes browseable=No Thanks -Glenn -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do
I finally fixed my problem by removing samba completely removing samba and reinstalling it. What I discovered is it appears to be an issue with rights. When I reinstalled samba the /var/lib/samba had rights like this. drwxrwxr-x+ 5 root root 4096 2010-01-11 23:27 samba On my original install where the 5 is it was a 6. After the reinstall the rights the rights on /var/lib/samba was reset to 5 and I made Domain Admins have read write execute rights on the folder with setfacl. Now everything is working. -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: Samba samba@lists.samba.org Sent: Thursday, July 16, 2009 4:16:48 PM Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do Dale, Yes, I have the right assigned to my Domain Admins group and I just added it to my account just encase there is a group rights problem. Here is my user id rights. net rpc rights list Domain\myaccount Enter root's password: SeMachineAccountPrivilege SeTakeOwnershipPrivilege SeBackupPrivilege SeRestorePrivilege SeRemoteShutdownPrivilege SePrintOperatorPrivilege SeAddUsersPrivilege SeDiskOperatorPrivilege Thanks for the suggestion! -Glenn - Original Message - From: Dale Schroeder d...@briannassaladdressing.com To: Glenn T. Arnold garn...@unrealsolutions.com Cc: Samba samba@lists.samba.org Sent: Thursday, July 16, 2009 3:58:08 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do Glenn, Have you granted your user Print Operator privileges? net rpc rights grant user SePrintOperatorPrivilege -U root http://us3.samba.org/samba/docs/man/Samba-HOWTO-Collection/NetCommand.html#id2601337 Dale Glenn T. Arnold wrote: Initially when I posted my access problems to print$ I was using the new registry based smb.conf I had my whole configuration in the registry. Now I move my printers and print$ back to the text based smb.conf and I copied the standard ubuntu debian [printers] and [print$] out of the original ubuntu package smb.conf and the only modification that I made was under the [print$] I change read only to no instead of yes. I can not write to the share. Simply renaming print$ section to print I can access the share and write to it with no problems. Any more suggestions? I need to get this resolved. Here is my smb.conf now: [global] # configbackend = registry include = registry [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = no guest ok = no Thanks -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba@lists.samba.org Sent: Wednesday, July 8, 2009 1:17:21 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) I did the suggested updates to app armor and this did not solve the problem. -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: Harry Jede walk2...@arcor.de Cc: samba@lists.samba.org Sent: Monday, July 6, 2009 10:05:14 AM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) Well, I did read the fine documentation and the documentation for this current situation it was no help. The reason I am using the registry for the smb.conf is memory savings, instance changes of smb.conf going into effect, and maybe future clustering. Also, I will state if using the samba registry method is not the proper way of doing things then why would the Samba developers add this feature into Samba? ;-) The reason I set the share with the current rights, is to troubleshoot the problem and prove that my file rights were correct. When I setup the print$ share the proper way it is still read-only even though I had writelist in effect. I currently have 1200 pc connect to a samba-ldap servers with the proper setup with no problems. I will investigate the app armor settings Thanks -Glenn - Original Message - From: Harry Jede walk2...@arcor.de To: samba@lists.samba.org Sent: Friday, July 3, 2009 3:22:19 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) On Thursday, 2. Juli 2009 wrote Glenn T. Arnold: I just made my print$ share settings to match my print drivers share which should work same This is what you believe. and I still cannot create folders or files on the print$ share, but I can all day on the print drivers share. Would someone explain why this is happening? Here is my share settings. [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\print$] path=/var/lib/samba/printers comment=Printer Drivers read only
[Samba] printcap cache time using registry config on Ubuntu 9.04 samba 3.3.2
I have been reading the man page on printcap cache time setting and have some questions. How much load does this put on a server if you have the setting less then 60? The reason I have this setting less than 60 is when I use an all registry samba configuration the printers do not show up if you browse the server or when you goto the Windows XP pc with the printer already connect shows printer status opening, but if you wait the default time period that samba sets for the printcap cache time the printer will eventually show up under the server. When I used the smb.conf file I did not observer this behavior. The reason I am using the all registry conf is to save some memory on the server. I have observed this behavior on another customers server with the same version ubuntu. The printcap cache time setting less than 60 seems to fix the issue or mask the issue enough to be liveable, but I want to make sure that I am not missing anything in configuring samba. Here is my config. [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\global] server string= dos charset=850 unix charset=ISO8859-1 workgroup=MYDOMAIN interfaces=bond0, lo passdb backend=ldapsam:ldap://myserver01.mthcs.net; passwd program=/usr/sbin//smbldap-passwd %u username map=/etc/samba/smbusers syslog=0 time server=Yes socket options=IPTOS_THROUGHPUT TCP_NODELAY add user script=/usr/sbin//smbldap-useradd -m \%u\ delete user script=/usr/sbin//smbldap-userdel \%u\ add group script=/usr/sbin//smbldap-groupadd -p \%g\ delete group script=/usr/sbin//smbldap-groupdel \%g\ add user to group script=/usr/sbin//smbldap-groupmod -m \%u\ \%g\ delete user from group script=/usr/sbin//smbldap-groupmod -x \%u\ \%g\ set primary group script=/usr/sbin//smbldap-usermod -g \%g\ \%u\ add machine script=/usr/sbin//smbldap-useradd -w \%u\ logon script=wkix32.exe logon.kix logon path= logon drive=h: logon home= domain logons=Yes os level=60 preferred master=Yes domain master=No wins server=10.100.0.10 lanman auth=yes ldap admin dn=cn=admin,dc=mthcs,dc=net ldap delete dn=Yes ldap group suffix=ou=Groups ldap idmap suffix=ou=Users ldap machine suffix=ou=Computers ldap passwd sync=Yes ldap suffix=dc=mthcs,dc=net ldap user suffix=ou=Users ldap ssl=no add share command=/usr/bin/modify_samba_config.pl change share command=/usr/bin/modify_samba_config.pl delete share command=/usr/bin/modify_samba_config.pl utmp=Yes idmap uid=1-2 idmap gid=1-2 printing=cups printcap name=cups force printername=Yes default devmode=no wins support=no smb ports=139 usershare max shares=0 log level=0 printcap cache time=30 [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\print$] comment=Printer Drivers path=/var/lib/samba/printers write list=\@Domain Admins\, root [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\printers] comment=All Printers path=/var/spool/samba guest ok=Yes printable=Yes browseable=No Thanks -Glenn -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -)
Jeremy, I do not think you got my log files, because I went through the log and I did not see the error you are referencing. When I went through the logs I did see references to print$ in the logs. What is a the proper way to post a log? I got bounced by the Samba List server when I paste the information in a post. I sent the log gziped did not get a bounce message, but I am not sure you got the log files. The file that I sent gzip was named print$level10.tar.gz Here is what I found under the two log files for print$ [2009/07/16 16:33:14, 2] param/loadparm.c:do_section(7498) Processing section [print$] [2009/07/16 16:33:14, 8] param/loadparm.c:add_a_service(5830) add_a_service: Creating snum = 1 for print$ [2009/07/16 16:33:14, 10] param/loadparm.c:hash_a_service(5877) hash_a_service: hashing index 1 for service name print$ -Glenn - Original Message - From: Jeremy Allison j...@samba.org To: Glenn T. Arnold garn...@unrealsolutions.com Cc: Jeremy Allison j...@samba.org, samba@lists.samba.org Sent: Thursday, July 16, 2009 6:01:44 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) On Thu, Jul 16, 2009 at 05:31:21PM -0400, Glenn T. Arnold wrote: Here is the level 10 log files I sent the first one as attachments which look like did not make it through. I don't see any attempts to open the print$ share in these logs. I do see an error : netlogon_creds_server_check: challenge : 14D0450551344C93 calculated: BAB7D8066C1D3129 netlogon_creds_server_check: credentials check failed. _netr_ServerAuthenticate3: netlogon_creds_server_check failed. Rejecting auth request from client WIN7 machine account WIN7$ Is this a Win7 machine ? 3.3.2 doesn't have the fixes for Win7 netlogon credentials in it (hardly suprising as Win7 wasn't even a twinkle in Microsoft's release schedule when 3.3.2 was shipped :-). Jeremy. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -)
Initially when I posted my access problems to print$ I was using the new registry based smb.conf I had my whole configuration in the registry. Now I move my printers and print$ back to the text based smb.conf and I copied the standard ubuntu debian [printers] and [print$] out of the original ubuntu package smb.conf and the only modification that I made was under the [print$] I change read only to no instead of yes. I can not write to the share. Simply renaming print$ section to print I can access the share and write to it with no problems. Any more suggestions? I need to get this resolved. Here is my smb.conf now: [global] # configbackend = registry include = registry [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = no guest ok = no Thanks -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba@lists.samba.org Sent: Wednesday, July 8, 2009 1:17:21 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) I did the suggested updates to app armor and this did not solve the problem. -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: Harry Jede walk2...@arcor.de Cc: samba@lists.samba.org Sent: Monday, July 6, 2009 10:05:14 AM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) Well, I did read the fine documentation and the documentation for this current situation it was no help. The reason I am using the registry for the smb.conf is memory savings, instance changes of smb.conf going into effect, and maybe future clustering. Also, I will state if using the samba registry method is not the proper way of doing things then why would the Samba developers add this feature into Samba? ;-) The reason I set the share with the current rights, is to troubleshoot the problem and prove that my file rights were correct. When I setup the print$ share the proper way it is still read-only even though I had writelist in effect. I currently have 1200 pc connect to a samba-ldap servers with the proper setup with no problems. I will investigate the app armor settings Thanks -Glenn - Original Message - From: Harry Jede walk2...@arcor.de To: samba@lists.samba.org Sent: Friday, July 3, 2009 3:22:19 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) On Thursday, 2. Juli 2009 wrote Glenn T. Arnold: I just made my print$ share settings to match my print drivers share which should work same This is what you believe. and I still cannot create folders or files on the print$ share, but I can all day on the print drivers share. Would someone explain why this is happening? Here is my share settings. [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\print$] path=/var/lib/samba/printers comment=Printer Drivers read only=no [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\printer drivers] path=/var/lib/samba/printers read only=no Why are you doing this? I think you should reread the excellent Samba docu again. Thanks -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba samba@lists.samba.org Sent: Thursday, July 2, 2009 3:29:29 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-) Harry, You did give me an idea though. For grins I just set rights to 0777 even on the extended acls and I still get access denied when trying to upload print drivers. Here is the updated rights on /var/lib/samba/printers. You make your own changes. That's really fine. -- Gruss Harry Jede -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do
Dale, Yes, I have the right assigned to my Domain Admins group and I just added it to my account just encase there is a group rights problem. Here is my user id rights. net rpc rights list Domain\myaccount Enter root's password: SeMachineAccountPrivilege SeTakeOwnershipPrivilege SeBackupPrivilege SeRestorePrivilege SeRemoteShutdownPrivilege SePrintOperatorPrivilege SeAddUsersPrivilege SeDiskOperatorPrivilege Thanks for the suggestion! -Glenn - Original Message - From: Dale Schroeder d...@briannassaladdressing.com To: Glenn T. Arnold garn...@unrealsolutions.com Cc: Samba samba@lists.samba.org Sent: Thursday, July 16, 2009 3:58:08 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do Glenn, Have you granted your user Print Operator privileges? net rpc rights grant user SePrintOperatorPrivilege -U root http://us3.samba.org/samba/docs/man/Samba-HOWTO-Collection/NetCommand.html#id2601337 Dale Glenn T. Arnold wrote: Initially when I posted my access problems to print$ I was using the new registry based smb.conf I had my whole configuration in the registry. Now I move my printers and print$ back to the text based smb.conf and I copied the standard ubuntu debian [printers] and [print$] out of the original ubuntu package smb.conf and the only modification that I made was under the [print$] I change read only to no instead of yes. I can not write to the share. Simply renaming print$ section to print I can access the share and write to it with no problems. Any more suggestions? I need to get this resolved. Here is my smb.conf now: [global] # configbackend = registry include = registry [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = no guest ok = no Thanks -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba@lists.samba.org Sent: Wednesday, July 8, 2009 1:17:21 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) I did the suggested updates to app armor and this did not solve the problem. -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: Harry Jede walk2...@arcor.de Cc: samba@lists.samba.org Sent: Monday, July 6, 2009 10:05:14 AM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) Well, I did read the fine documentation and the documentation for this current situation it was no help. The reason I am using the registry for the smb.conf is memory savings, instance changes of smb.conf going into effect, and maybe future clustering. Also, I will state if using the samba registry method is not the proper way of doing things then why would the Samba developers add this feature into Samba? ;-) The reason I set the share with the current rights, is to troubleshoot the problem and prove that my file rights were correct. When I setup the print$ share the proper way it is still read-only even though I had writelist in effect. I currently have 1200 pc connect to a samba-ldap servers with the proper setup with no problems. I will investigate the app armor settings Thanks -Glenn - Original Message - From: Harry Jede walk2...@arcor.de To: samba@lists.samba.org Sent: Friday, July 3, 2009 3:22:19 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) On Thursday, 2. Juli 2009 wrote Glenn T. Arnold: I just made my print$ share settings to match my print drivers share which should work same This is what you believe. and I still cannot create folders or files on the print$ share, but I can all day on the print drivers share. Would someone explain why this is happening? Here is my share settings. [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\print$] path=/var/lib/samba/printers comment=Printer Drivers read only=no [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\printer drivers] path=/var/lib/samba/printers read only=no Why are you doing this? I think you should reread the excellent Samba docu again. Thanks -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba samba@lists.samba.org Sent: Thursday, July 2, 2009 3:29:29 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-) Harry, You did give me an idea though. For grins I just set rights to 0777 even on the extended acls and I still get access denied when trying to upload print drivers. Here is the updated rights on /var/lib/samba/printers. You make your own changes. That's really fine
Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -)
I did the suggested updates to app armor and this did not solve the problem. -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: Harry Jede walk2...@arcor.de Cc: samba@lists.samba.org Sent: Monday, July 6, 2009 10:05:14 AM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) Well, I did read the fine documentation and the documentation for this current situation it was no help. The reason I am using the registry for the smb.conf is memory savings, instance changes of smb.conf going into effect, and maybe future clustering. Also, I will state if using the samba registry method is not the proper way of doing things then why would the Samba developers add this feature into Samba? ;-) The reason I set the share with the current rights, is to troubleshoot the problem and prove that my file rights were correct. When I setup the print$ share the proper way it is still read-only even though I had writelist in effect. I currently have 1200 pc connect to a samba-ldap servers with the proper setup with no problems. I will investigate the app armor settings Thanks -Glenn - Original Message - From: Harry Jede walk2...@arcor.de To: samba@lists.samba.org Sent: Friday, July 3, 2009 3:22:19 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) On Thursday, 2. Juli 2009 wrote Glenn T. Arnold: I just made my print$ share settings to match my print drivers share which should work same This is what you believe. and I still cannot create folders or files on the print$ share, but I can all day on the print drivers share. Would someone explain why this is happening? Here is my share settings. [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\print$] path=/var/lib/samba/printers comment=Printer Drivers read only=no [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\printer drivers] path=/var/lib/samba/printers read only=no Why are you doing this? I think you should reread the excellent Samba docu again. Thanks -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba samba@lists.samba.org Sent: Thursday, July 2, 2009 3:29:29 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-) Harry, You did give me an idea though. For grins I just set rights to 0777 even on the extended acls and I still get access denied when trying to upload print drivers. Here is the updated rights on /var/lib/samba/printers. You make your own changes. That's really fine. -- Gruss Harry Jede -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -)
Well, I did read the fine documentation and the documentation for this current situation it was no help. The reason I am using the registry for the smb.conf is memory savings, instance changes of smb.conf going into effect, and maybe future clustering. Also, I will state if using the samba registry method is not the proper way of doing things then why would the Samba developers add this feature into Samba? ;-) The reason I set the share with the current rights, is to troubleshoot the problem and prove that my file rights were correct. When I setup the print$ share the proper way it is still read-only even though I had writelist in effect. I currently have 1200 pc connect to a samba-ldap servers with the proper setup with no problems. I will investigate the app armor settings Thanks -Glenn - Original Message - From: Harry Jede walk2...@arcor.de To: samba@lists.samba.org Sent: Friday, July 3, 2009 3:22:19 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) On Thursday, 2. Juli 2009 wrote Glenn T. Arnold: I just made my print$ share settings to match my print drivers share which should work same This is what you believe. and I still cannot create folders or files on the print$ share, but I can all day on the print drivers share. Would someone explain why this is happening? Here is my share settings. [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\print$] path=/var/lib/samba/printers comment=Printer Drivers read only=no [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\printer drivers] path=/var/lib/samba/printers read only=no Why are you doing this? I think you should reread the excellent Samba docu again. Thanks -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba samba@lists.samba.org Sent: Thursday, July 2, 2009 3:29:29 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-) Harry, You did give me an idea though. For grins I just set rights to 0777 even on the extended acls and I still get access denied when trying to upload print drivers. Here is the updated rights on /var/lib/samba/printers. You make your own changes. That's really fine. -- Gruss Harry Jede -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
[Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-)
I am setting up a OpenLdap PDC with file and print services on Ubuntu Jaunty. Jaunty ships with samba 3.3.2. I configured samba to just use the registry back in which I think is pretty cool! What happend when I use the Add print wizard to add my Windows XP drivers I get the famous unable to install driver access denied message. I can ssh into the box with my user id and create files in the /var/lib/samba/printers folder with no problem. I have gave the Domain Admins and root all privileges to manage the domain see bellow. r...@server01:/var/lib/samba/printers# net rpc rights list root Enter root's password: SeMachineAccountPrivilege SeTakeOwnershipPrivilege SeBackupPrivilege SeRestorePrivilege SeRemoteShutdownPrivilege SePrintOperatorPrivilege SeAddUsersPrivilege SeDiskOperatorPrivilege net rpc rights list Domain Admins Enter root's password: SeMachineAccountPrivilege SeTakeOwnershipPrivilege SeBackupPrivilege SeRestorePrivilege SeRemoteShutdownPrivilege SePrintOperatorPrivilege SeAddUsersPrivilege SeDiskOperatorPrivilege Here is the rights on the /var/lib/samba/printers directory r...@server01:/var/lib/samba# getfacl printers -R # file: printers # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/W32X86 # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/W32ALPHA # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/showtrueconfig # owner: root # group: root user::rw- group::r-x #effective:r-- group:Domain\040Admins:rwx #effective:rw- mask::rw- other::r-- # file: printers/W32MIPS # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/x64 # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/W32PPC # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/IA64 # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/WIN40 # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/COLOR # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x I created a second share called printer drivers to prove I have rights to write to the /var/lib/samba/printers folder from a windows xp. Which I can create and copy files and folders with no problems through the print drivers share, but when I connect to the /var/lib/samba/printers folder through print$ I get access denied. But, I can add workstations to the domain with no problems, I can change security on the printer I am trying to upload a print driver with no problems. If you run smbstatus you can see when I connect with root that it only shows read only rights here is my smbstatus ouptput . Locked files: Pid Uid DenyMode Access R/W Oplock SharePath Name Time -- 12885 0 DENY_NONE 0x100081 RDONLY NONE /var/lib/samba/printers . Thu Jul 2 13:13:34 2009 12885 0 DENY_NONE 0x100081 RDONLY NONE /var/lib/samba/printers . Thu Jul 2 13:13:34 2009 12471 1 DENY_NONE 0x100081 RDONLY NONE /var/lib/samba/printers . Thu Jul 2 13:06:46 2009 12471 1 DENY_NONE 0x100081 RDONLY NONE /var/lib/samba/printers . Thu Jul 2 13:06:46 2009 12471 1 DENY_NONE 0x100081 RDONLY NONE /var/lib/samba/printers . Thu Jul 2 13:35:05 2009 12471 1 DENY_NONE 0x100081 RDONLY NONE /home/gtarnold . Thu Jul 2 13:39:55 2009 Below is my
Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-)
I found in the samba log for my machine the following error: [2009/07/02 13:13:34, 0] groupdb/mapping.c:pdb_create_builtin_alias(802) pdb_create_builtin_alias: Could not add group mapping entry for alias 545 (NT_STATUS_GROUP_EXISTS) Any input on this would be appreciated! I researching this error now. -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba samba@lists.samba.org Sent: Thursday, July 2, 2009 2:09:15 PM GMT -05:00 US/Canada Eastern Subject: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-) I am setting up a OpenLdap PDC with file and print services on Ubuntu Jaunty. Jaunty ships with samba 3.3.2. I configured samba to just use the registry back in which I think is pretty cool! What happend when I use the Add print wizard to add my Windows XP drivers I get the famous unable to install driver access denied message. I can ssh into the box with my user id and create files in the /var/lib/samba/printers folder with no problem. I have gave the Domain Admins and root all privileges to manage the domain see bellow. r...@server01:/var/lib/samba/printers# net rpc rights list root Enter root's password: SeMachineAccountPrivilege SeTakeOwnershipPrivilege SeBackupPrivilege SeRestorePrivilege SeRemoteShutdownPrivilege SePrintOperatorPrivilege SeAddUsersPrivilege SeDiskOperatorPrivilege net rpc rights list Domain Admins Enter root's password: SeMachineAccountPrivilege SeTakeOwnershipPrivilege SeBackupPrivilege SeRestorePrivilege SeRemoteShutdownPrivilege SePrintOperatorPrivilege SeAddUsersPrivilege SeDiskOperatorPrivilege Here is the rights on the /var/lib/samba/printers directory r...@server01:/var/lib/samba# getfacl printers -R # file: printers # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/W32X86 # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/W32ALPHA # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/showtrueconfig # owner: root # group: root user::rw- group::r-x #effective:r-- group:Domain\040Admins:rwx #effective:rw- mask::rw- other::r-- # file: printers/W32MIPS # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/x64 # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/W32PPC # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/IA64 # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/WIN40 # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x # file: printers/COLOR # owner: root # group: Domain\040Admins user::rwx group::r-x group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x I created a second share called printer drivers to prove I have rights to write to the /var/lib/samba/printers folder from a windows xp. Which I can create and copy files and folders with no problems through the print drivers share, but when I connect to the /var/lib/samba/printers folder through print$ I get access denied. But, I can add workstations to the domain with no problems, I can change security on the printer I am trying to upload a print driver with no problems. If you run smbstatus you can see when I connect with root that it only shows read only rights here is my smbstatus ouptput . Locked files: Pid Uid DenyMode Access R/W Oplock SharePath Name Time
Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-)
Harry, You did give me an idea though. For grins I just set rights to 0777 even on the extended acls and I still get access denied when trying to upload print drivers. Here is the updated rights on /var/lib/samba/printers. r...@server01:/var/lib/samba# getfacl printers/* # file: printers/COLOR # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/IA64 # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/showtrueconfig # owner: root # group: root user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx # file: printers/W32ALPHA # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/W32MIPS # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/W32PPC # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/W32X86 # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/WIN40 # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/x64 # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx r...@server01:/var/lib/samba# -Glenn - Original Message - From: Harry Jede walk2...@arcor.de To: samba@lists.samba.org Sent: Thursday , July 2, 2009 2:53:41 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) On Donnerstag, 2. Juli 2009 wrote Glenn T. Arnold: Here is the rights on the /var/lib/samba/printers directory r...@server01:/var/lib/samba# getfacl printers -R # file: printers # owner: root # group: Domain\040Admins user::rwx group::r-x # grant Domain\040Admins write access group::rwx group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x -- Harry Jede -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba samba@lists.samba.org Sent: Thursday, July 2, 2009 2:49:27 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-) I found in the samba log for my machine the following error: [2009/07/02 13:13:34, 0] groupdb/mapping.c:pdb_create_builtin_alias(802) pdb_create_builtin_alias: Could not add group mapping entry for alias 545 (NT_STATUS_GROUP_EXISTS) Any input on this would be appreciated! I researching this error now. -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba samba@lists.samba.org Sent: Thursday, July 2, 2009 2:09:15 PM GMT -05:00 US/Canada Eastern Subject: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-) I am setting up a OpenLdap PDC with file and print services on Ubuntu Jaunty. Jaunty ships with samba 3.3.2. I configured samba to just use the registry back in which I think is pretty cool! What happend when I use the Add print wizard to add my Windows XP drivers I get the famous unable to install driver access denied message. I can ssh into the box with my user id and create files in the /var/lib/samba/printers folder with no problem. I have gave the Domain Admins and root all privileges to manage the domain see bellow. r...@server01:/var/lib/samba/printers# net rpc rights list root Enter root's password: SeMachineAccountPrivilege SeTakeOwnershipPrivilege SeBackupPrivilege SeRestorePrivilege
Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-)
I just made my print$ share settings to match my print drivers share which should work same and I still cannot create folders or files on the print$ share, but I can all day on the print drivers share. Would someone explain why this is happening? Here is my share settings. [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\print$] path=/var/lib/samba/printers comment=Printer Drivers read only=no [HKEY_LOCAL_MACHINE\SOFTWARE\Samba\smbconf\printer drivers] path=/var/lib/samba/printers read only=no Thanks -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba samba@lists.samba.org Sent: Thursday, July 2, 2009 3:29:29 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-) Harry, You did give me an idea though. For grins I just set rights to 0777 even on the extended acls and I still get access denied when trying to upload print drivers. Here is the updated rights on /var/lib/samba/printers. r...@server01:/var/lib/samba# getfacl printers/* # file: printers/COLOR # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/IA64 # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/showtrueconfig # owner: root # group: root user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx # file: printers/W32ALPHA # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/W32MIPS # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/W32PPC # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/W32X86 # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/WIN40 # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx # file: printers/x64 # owner: root # group: Domain\040Admins user::rwx group::rwx group:Domain\040Admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:Domain\040Admins:rwx default:mask::rwx default:other::rwx r...@server01:/var/lib/samba# -Glenn - Original Message - From: Harry Jede walk2...@arcor.de To: samba@lists.samba.org Sent: Thursday , July 2, 2009 2:53:41 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do; -) On Donnerstag, 2. Juli 2009 wrote Glenn T. Arnold: Here is the rights on the /var/lib/samba/printers directory r...@server01:/var/lib/samba# getfacl printers -R # file: printers # owner: root # group: Domain\040Admins user::rwx group::r-x # grant Domain\040Admins write access group::rwx group:Domain\040Admins:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:Domain\040Admins:rwx default:mask::rwx default:other::r-x -- Harry Jede -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba samba@lists.samba.org Sent: Thursday, July 2, 2009 2:49:27 PM GMT -05:00 US/Canada Eastern Subject: Re: [Samba] Ubuntu Jaunty samba 3.3.2 print$ no write rights even though I do;-) I found in the samba log for my machine the following error: [2009/07/02 13:13:34, 0] groupdb/mapping.c:pdb_create_builtin_alias(802) pdb_create_builtin_alias: Could not add group mapping entry for alias 545 (NT_STATUS_GROUP_EXISTS) Any input on this would be appreciated! I researching this error now. -Glenn - Original Message - From: Glenn T. Arnold garn...@unrealsolutions.com To: samba samba@lists.samba.org Sent: Thursday, July 2, 2009 2:09:15 PM GMT -05:00 US/Canada Eastern Subject
