Re: [Samba] Need help compiling Samba on Solaris
I got it to compile and run. I joined it to the domain and what the wbinfo and net ads commands returned looked correct. I was not able to map a drive to it. Computer management in windows says that nothing is shared and when I browsed for the server it showed up under Other and not the domain. I was not aware that nsswitch might need to be compiled also. Is there documentation that says for samba x.x.x you need openldap x.x.x or Kerberos x.x.x? I haven't seen anything on samba.org or in the source code. I the Solaris samba source code I found the configure options they used. On samba 3.0.37 we have the windows 2003 domain controller listed as the password server in the smb.conf and as the kdc in the krb5.conf files. The windows 2008 domain controller doesn't like samba. Set the Network Security: LAN Manager authentication level to LM and NTLM - use NTLMV2 session security if negotiated http://yonitg.com/solution-for-windows-7-samba-connection-problem I need to build a newer version because the windows admin wants to replace the windows 2003 dc with a windows 2008 dc. -Original Message- From: Gaiseric Vandal [mailto:gaiseric.van...@gmail.com] Sent: Monday, October 04, 2010 17:02 To: samba@lists.samba.org Subject: Re: [Samba] Need help compiling Samba on Solaris Sort of compiled? Does that mean some options didn't compile? I was able to compile samba 3.4.x. (as you point out, it requires tinkering with the CPPFLAGS etc.)The latest OpenLDAP from sunfreeware should be fine (plus its dependencies, which are listed.) Presumably you are using GCC from Sunfreeware? The Solaris kerberos should be fine. nsswitch source is in a separate directory .../samba-3.4.8/nsswitch not .../samba-3.4.8/source3 you may need to compile separately. I see your other post. 3.0.37 generally worked for me except for interdomain trusts. I know it wouldn't work with Windows 7 but that wasn't an issue for me at the time. (Again, I repeat complain about Sun abandoning samba and not moving before 3.0.x- which is will be useless one you need to support Windows 7.) On 10/04/2010 04:59 PM, Stroh, George wrote: I had limited success compiling 3.4.8 and 3.5.4 on Solaris 10 8/07 x86. I downloaded the source code from Samba.org and the dependencies from sunfreeware.com. After some googling and trial and error with the LDDFLAGS, CPPFLAGS and such, it sort of compiled. I need to know how to properly set things up. How can I find out what version of dependencies you need for a particular samba version? -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Need help compiling Samba on Solaris
Documentation on samba.org is a little iffy - stuff involving domain trusts and idmap has really been thin. I had to rely on google searches to find info on changes for idmap between 3.0.x and 3.4.x Are you using a WINS server? Active Directory does not require one- and I suspect Samba 3 as a ADS domain member might not either, but may help fix browsing issue. Did you specify the workgroup in smb.conf? That may also help. Was a computer account created in AD for your samba machine? A google search at some point found a solaris or opensolaris forum blurb about ldap. Sun's samba build using Sun LDAP client with some work arounds.Otherwise openldap is the default. When you run configure, it will say which ldap features are supported. Effectively, if you want AD support you need openldap. I think Win 2008 R2 may increase security levels compared to Win 2008.I think it is safe to assume samba 3.0.x is not Win 2008 R2 compatible. On 10/05/2010 10:46 AM, Stroh, George wrote: I got it to compile and run. I joined it to the domain and what the wbinfo and net ads commands returned looked correct. I was not able to map a drive to it. Computer management in windows says that nothing is shared and when I browsed for the server it showed up under Other and not the domain. I was not aware that nsswitch might need to be compiled also. Is there documentation that says for samba x.x.x you need openldap x.x.x or Kerberos x.x.x? I haven't seen anything on samba.org or in the source code. I the Solaris samba source code I found the configure options they used. On samba 3.0.37 we have the windows 2003 domain controller listed as the password server in the smb.conf and as the kdc in the krb5.conf files. The windows 2008 domain controller doesn't like samba. Set the Network Security: LAN Manager authentication level to LM and NTLM - use NTLMV2 session security if negotiated http://yonitg.com/solution-for-windows-7-samba-connection-problem I need to build a newer version because the windows admin wants to replace the windows 2003 dc with a windows 2008 dc. -Original Message- From: Gaiseric Vandal [mailto:gaiseric.van...@gmail.com] Sent: Monday, October 04, 2010 17:02 To: samba@lists.samba.org Subject: Re: [Samba] Need help compiling Samba on Solaris Sort of compiled? Does that mean some options didn't compile? I was able to compile samba 3.4.x. (as you point out, it requires tinkering with the CPPFLAGS etc.)The latest OpenLDAP from sunfreeware should be fine (plus its dependencies, which are listed.) Presumably you are using GCC from Sunfreeware? The Solaris kerberos should be fine. nsswitch source is in a separate directory .../samba-3.4.8/nsswitch not .../samba-3.4.8/source3 you may need to compile separately. I see your other post. 3.0.37 generally worked for me except for interdomain trusts. I know it wouldn't work with Windows 7 but that wasn't an issue for me at the time. (Again, I repeat complain about Sun abandoning samba and not moving before 3.0.x- which is will be useless one you need to support Windows 7.) On 10/04/2010 04:59 PM, Stroh, George wrote: I had limited success compiling 3.4.8 and 3.5.4 on Solaris 10 8/07 x86. I downloaded the source code from Samba.org and the dependencies from sunfreeware.com. After some googling and trial and error with the LDDFLAGS, CPPFLAGS and such, it sort of compiled. I need to know how to properly set things up. How can I find out what version of dependencies you need for a particular samba version? -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Need help compiling Samba on Solaris
Sort of compiled? Does that mean some options didn't compile? I was able to compile samba 3.4.x. (as you point out, it requires tinkering with the CPPFLAGS etc.)The latest OpenLDAP from sunfreeware should be fine (plus its dependencies, which are listed.) Presumably you are using GCC from Sunfreeware? The Solaris kerberos should be fine. nsswitch source is in a separate directory .../samba-3.4.8/nsswitch not .../samba-3.4.8/source3 you may need to compile separately. I see your other post. 3.0.37 generally worked for me except for interdomain trusts. I know it wouldn't work with Windows 7 but that wasn't an issue for me at the time. (Again, I repeat complain about Sun abandoning samba and not moving before 3.0.x- which is will be useless one you need to support Windows 7.) On 10/04/2010 04:59 PM, Stroh, George wrote: I had limited success compiling 3.4.8 and 3.5.4 on Solaris 10 8/07 x86. I downloaded the source code from Samba.org and the dependencies from sunfreeware.com. After some googling and trial and error with the LDDFLAGS, CPPFLAGS and such, it sort of compiled. I need to know how to properly set things up. How can I find out what version of dependencies you need for a particular samba version? -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
