Re: [sane-devel] sane-avision HP 5370C

2014-07-21 Thread Benoit Izac 
Le 21/07/2014 à 08:52, Toby Rees écrivait :

>> > I own a HP 5370C and it didn't work anymore since firmware checking had 
>> > been
>> > added in this commit:
>> >  /sane-backends.git;a=commitdiff;h=fec4800d7da9f14ff3ca8f82b1327ec9aed76318>
>> >
>> > Please, could you revert it?
>> 
>> Hi,
>> 
>> Nobody to do it? Is avision backend no more maintained (no commit for
>> about two years)?
>> 
>
> I have the same issue. Were you able to keep the scanner working with an
> older version?
> If so can you point me in the right direction?

Hi,

You can use any version <= 1.0.22 without modify it.

I use current stable version (1.0.24) after I modified avision.c in
backend source directory.

 1) get the source


 2) search "ScanJet 5370C" in backend/avision.c and modify
AV_MULTI_CALIB_CMD | AV_INT_STATUS, AV_FIRMWARE },
with (this disable firmware checking)
AV_MULTI_CALIB_CMD | AV_INT_STATUS, 0},

  3) recompile backends

  4) copy new libsane-avision.so.1.0.24 in /usr/lib/sane/ (or where your
  distribution put sane shared libraries)

It's working fine after so I don't understand why nodody wants to commit
the change. :-(

-- 
Benoit Izac

-- 
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
 to sane-devel-requ...@lists.alioth.debian.org

Re: [sane-devel] Scanner Canon P-208

2014-07-21 Thread m. allan noah 
Is this one of the models with a switch on the bottom or back to make it
change modes?

allan


On Mon, Jul 21, 2014 at 9:02 AM,  wrote:

> Hello,
>
>
> We are testing the Canon P-208 scanner. The P-208 model is
> listed in supported scanners but has another usb id.
> How can we do recognize it.
> We have changed the configuration file canon_dr.conf and
> 85-libsane.rules but does not recognize it.
>
> P-208: USB ID: 0x1083/0x164e
>
> Thanks.
>
> Regards.
>
> *Marc Viaplana*
> * COSTAISA * 
> Euterpe, 11
> 08017 Barcelona
> ( 932 536 100 - Ext. 226
> * mviapl...@costaisa.com
>
> Evite imprimir este mensaje si no es estrictamente necesario | Eviti
> imprimir aquest missatge si no és estrictament necessari | Avoid printing
> this message if it is not absolutely necessary
> --
> sane-devel mailing list: sane-devel@lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>  to sane-devel-requ...@lists.alioth.debian.org
>



-- 
"The truth is an offense, but not a sin"
-- 
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
 to sane-devel-requ...@lists.alioth.debian.org

[sane-devel] Scanner Canon P-208

2014-07-21 Thread mviaplana 
Hello,


We are testing the Canon P-208 scanner. The P-208 model is 
listed in supported scanners but has another usb id. 
How can we do recognize it. 
We have changed the configuration file canon_dr.conf and 
85-libsane.rules but does not recognize it.

P-208: USB ID: 0x1083/0x164e

Thanks.

Regards.
 
Marc Viaplana 
 COSTAISA 
Euterpe, 11 
08017 Barcelona 
( 932 536 100 - Ext. 226 
* mviapl...@costaisa.com

Evite imprimir este mensaje si no es estrictamente necesario | Eviti 
imprimir aquest missatge si no és estrictament necessari | Avoid printing 
this message if it is not absolutely necessary-- 
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
 to sane-devel-requ...@lists.alioth.debian.org

[sane-devel] Canonscan N 650U LIDE Scanner does not scan but makes terrible noise AGAIN !

2014-07-21 Thread Winni 

Hi,

with the ubuntu 14.04 release again I have to suffer the terrible noise 
of my Canonscan N 650U LIDE Scanner.


I downloaded sane-backends-1.0.24.tar.gz 


*
+++

plustek-usbdevs.c*

/** Canon N650U/N656U */
static HWDef Hw0x04A9_0x2206 =
{
0.76,   /* dMaxMotorSpeed*/
0.243,  /* dMaxMoveSpeed */

I tried 0,80 but also same problem.

../configure \
 --prefix=/usr \
 --sysconfdir=/etc \
 --mandir=/usr/share/man \
 --infodir=/usr/share/info
 --with-lockdir=/var/lock/sane



export SANE_DEBUG_PLUSTEK=5

scanimage -l
[sanei_debug] Setting debug level of plustek to 5.
[plustek] Plustek backend V0.52-10, part of sane-backends 1.0.23
[plustek] Retrieving all supported and conntected devices
[plustek] Available and supported devices:
[plustek] Device: >libusb:002:006< - 0x04a9x0x2206
[plustek] usbDev_open(auto,) - 0xe6ef20
[plustek] Vendor ID=0x04A9, Product ID=0x2206
[plustek] usbio_DetectLM983x
[plustek] usbio_DetectLM983x: found LM9832/3
[plustek]  * setting device to idle state!
[plustek] Detected vendor & product ID: 0x04A9-0x2206
[plustek] Device description for >0x04A9-0x2206< found.
[plustek] usb_initDev(38,0x04a9,-1)
[plustek] Device WAF  : 0x4002
[plustek] Transferrate: 100 Bytes/s
[plustek] Device Flags: 0x
[plustek] Vendor adjusted to: >Canon<
[plustek] LAMP-STATUS: 0x (off)
[plustek] RESETTING REGISTERS(-1) - 0x80
[plustek] MISC I/O after RESET: 0x66, 0x16, 0x91
[plustek] Calibration file-names set to:
[plustek] >/home/user/.sane/Canon_CanoScan_N650U_N656U-coarse.cal<
[plustek] >/home/user/.sane/Canon_CanoScan_N650U_N656U-fine.cal<
[plustek] usb_SetScanParameters()
[plustek] usb_GetMCLKDivider()
[plustek] usb_GetMCLKDiv()
[plustek] * PhyBytes   = 6
[plustek] * PhyLines   = 4
[plustek] * TotalBytes = 24
[plustek] * Scansteps=72 (9*1200/150)
[plustek] usb_SetScanParameters() done.
[plustek] usbDev_getCaps()
[plustek] Scanner information:
[plustek] Vendor : Canon
[plustek] Model  : CanoScan N650U/N656U
[plustek] Flags  : 0x
[plustek] drvclose()
[plustek] usbDev_stopScan()
[plustek] usbDev_ScanEnd(), start=0, park=0
[plustek] usbDev_close()
[plustek] Presetting Gamma tables (len=4096)
[plustek] * Channel[0], gamma 2.000
[plustek] * Channel[1], gamma 2.000
[plustek] * Channel[2], gamma 2.000
[plustek] * Channel[3], gamma 2.000
[plustek] --
scanimage: option requires an argument -- 'l'
[plustek] Shutdown called (dev->fd=-1, libusb:002:006)
[plustek] Waiting for scanner-ready...
[plustek] Switching lamp off...
[plustek] LAMP-STATUS: 0x (off)
[plustek] LAMP-STATUS: 0x (off)
[plustek] Lamp-Timer stopped

Help is highly apreciated!

Winni
-- 
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
 to sane-devel-requ...@lists.alioth.debian.org
-- 
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
 to sane-devel-requ...@lists.alioth.debian.org

Re: [sane-devel] sane-avision HP 5370C

2014-07-21 Thread Toby Rees 
Benoit Izac  izac.org> writes:

> 
> I wrote:
> 
> > I own a HP 5370C and it didn't work anymore since firmware checking had been
> > added in this commit:
> > 
> >
> > Please, could you revert it?
> 
> Hi,
> 
> Nobody to do it? Is avision backend no more maintained (no commit for
> about two years)?
> 



Hi Benoit,

I have the same issue. Were you able to keep the scanner working with an
older version? 
If so can you point me in the right direction?

Thanks

Tobes




-- 
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
 to sane-devel-requ...@lists.alioth.debian.org