Re: [Server-devel] [XSCE] xsce on rpi georgehunt's base-6.2

[Tim Moody]

sorry, I may have seemed to imply that ansible needs to be 2.2. I think just 
2.2 or greater. stick with 2.3


see below


From: xsce-de...@googlegroups.com  on behalf of 
Reno McDonald 
Sent: Sunday, January 15, 2017 1:30 PM
To: xsce-de...@googlegroups.com
Cc: server-devel
Subject: Re: [XSCE] xsce on rpi georgehunt's base-6.2

Is Ansible 2.2 the magical version? I have some notes on my unsuccessful 
attempts to install XSCE. So far, I have not succeeded at installing XSCE on a 
RPI2. (Do note though that imaging my SD card does work on the RPI2.) The 
various Ansible versions are mostly pulled from Github Except where noted.


All of these are RASPBIAN JESSIE LITE and George's Base-6.2 branch (except 
where noted).


  *   Ansible 1.8 Does not work. Roles use new keywords, ansible recognizes 
this and exits.

  *   Ansible 1.9 had a series of problems to what I later think is due to 
newer commands. Also, duplicate keys cause it to halt. (couldnt find duplicate 
keys, but that's what Ansible said). Wasn't taking such detailed notes at that 
time :\.
  *   Ansible 2.3.0 (Installed from Tim's Script.)
 *   fatal: Unable to mark file vars/local_vars.yml
 *   I think this is an attempt to untrack local_vars to permit changes.  
It will only cause a problem if you make changes and later try to git pull
 *   Error occurs and simply continues

  TASK [Gathering Facts] 

  ok: [127.0.0.1]
   [WARNING]: While constructing a mapping from 
/opt/schoolserver/xsce/vars/Debian.yml, line 1,
  column 1, found a duplicate dict key (apache_log_dir). Using last defined 
value only.

 *2.3.0 doesn't care about duplicate keys and gracefully handles by 
using last duplicate key it sees. Previous versions error & stops.

TASK [xsce-admin : Enable ssl] 

  fatal: [127.0.0.1]: FAILED! => {"changed": false, "failed": true, "msg": 
"Error executing /usr/sbin/apache2ctl: [Thu Jan 12 22:24:50.174043 2017] 
[proxy_html:notice] [pid 8890] AH01425: I18n support in mod_proxy_html requires 
mod_xml2enc. Without it, non-ASCII characters in proxied pages are likely to 
display incorrectly.\n[Thu Jan 12 22:24:50.180203 2017] [alias:warn] [pid 8890] 
AH00671: The Alias directive in /etc/apache2/sites-enabled/010-xsce.conf at 
line 271 will probably never match because it overlaps an earlier Alias.\n(2)No 
such file or directory: AH02297: Cannot access directory '/var/log/apache2}/' 
for log file '/var/log/apache2}/access.log' defined at 
/etc/apache2/sites-enabled/010-xsce.conf:158\nAH00014: Configuration check 
failed\n"}

this would be a new bug as it is the area currently getting worked on

 *   /etc/apache2/sites-enabled/010-xsce.conf line 158 has a type:
*   A bracket breaks the config.
*   Upon fixing and rerunning, the typo resurfaces.
*
*   fixing the target never helps because the next ansible run replaces 
your fix.  need to fix in ansible. hopefully George will do so.

not sure 6.1 ever ran on raspbian

TASK [httpd : Create httpd config files] 
**
  failed: [127.0.0.1] (item={u'dest': u'/etc/httpd/conf.d/010-xsce.conf', 
u'src': u'010-xsce.conf.j2', u'mode': u'0755'}) => {"changed": true, "failed": 
true, "item": {"dest": "/etc/httpd/conf.d/010-xsce.conf", "mode": "0755", 
"src": "010-xsce.conf.j2"}, "msg": "Destination directory /etc/httpd/conf.d 
does not exist"}
  failed: [127.0.0.1] (item={u'dest': u'/etc/httpd/conf.d/proxy_ajp.conf', 
u'src': u'proxy_ajp.conf.j2', u'mode': u'0644'}) => {"changed": true, "failed": 
true, "item": {"dest": "/etc/httpd/conf.d/proxy_ajp.conf", "mode": "0644", 
"src": "proxy_ajp.conf.j2"}, "msg": "Destination directory /etc/httpd/conf.d 
does not exist"}
  ok: [127.0.0.1] => (item={u'dest': u'/etc/php.ini', u'src': u'php.ini.j2', 
u'mode': u'0644'})
  failed: [127.0.0.1] (item={u'dest': u'/etc/httpd/conf.d/xs-console.conf', 
u'src': u'xs-console.conf.j2', u'mode': u'0644'}) => {"changed": true, 
"failed": true, "item": {"dest": "/etc/httpd/conf.d/xs-console.conf", "mode": 
"0644", "src": "xs-console.conf.j2"}, "msg": "Destination directory 
/etc/httpd/conf.d does not exist"}














On Sun, Jan 15, 2017 at 7:09 AM, Tim Moody 
mailto:t...@timmoody.com>> wrote:

? that;  error in the previous email



From: xsce-de...@googlegroups.com 
mailto:xsce-de...@googlegroups.com>> on behalf of 
Anish Mangal mailto:anis...@umich.edu>>
Sent: Sunday, January 15, 2017 9:49 AM
To: xsce-devel
Cc: server-devel
Subject: Re: [XSCE] xsce on rpi georgehunt's base-6.2

Thx. got past that, now hitting the error in the previous email I sent.

On Sun, Jan 15, 2017 at 8:15 PM, Tim Moody 
mailto:t...@timmoody.com>> wrote:




From: xsce-de.

Re: [Server-devel] [XSCE] xsce on rpi georgehunt's base-6.2

[Tim Moody]

? that;  error in the previous email



From: xsce-de...@googlegroups.com  on behalf of 
Anish Mangal 
Sent: Sunday, January 15, 2017 9:49 AM
To: xsce-devel
Cc: server-devel
Subject: Re: [XSCE] xsce on rpi georgehunt's base-6.2

Thx. got past that, now hitting the error in the previous email I sent.

On Sun, Jan 15, 2017 at 8:15 PM, Tim Moody 
mailto:t...@timmoody.com>> wrote:




From: xsce-de...@googlegroups.com 
mailto:xsce-de...@googlegroups.com>> on behalf of 
Anish Mangal mailto:anis...@umich.edu>>
Sent: Sunday, January 15, 2017 7:52 AM
To: xsce-devel; server-devel
Subject: [XSCE] xsce on rpi georgehunt's base-6.2

Hi,

now setting up xsce on rpi3 from scratch
[trying on 2017-01-11-raspbian-jessie-lite.img as base]

log of commands follows #
# sudo apt-get update [success]
# sudo apt-get upgrade [success]
- I don't normally do this one

# apt-get install vim git ansible [success]
I follow George in using 
https://github.com/tim-moody/xsce-factory/blob/master/scripts/ansible/get-ansible
 to install ansible (2.2.x)

# mkdir /opt/schoolserver
# cd /opt/schoolserver
# git clone https://github.com/georgejhunt/xsce.git [success]
# cd xsce
# git branch [success base-6.2]
# ./runansible [here-we-go!]
ERROR: become is not a legal parameter at this level in an Ansible Playbook

Perhaps this is an incorrect version of ansible 1.7.2 which gets installed by 
default. How do I fix this?

become is a new keyword




--
Anish


___
Server-devel mailing list
Server-devel@lists.laptop.org
http://lists.laptop.org/listinfo/server-devel

Re: [Server-devel] [XSCE] xsce on rpi georgehunt's base-6.2

[Anish Mangal]

Thx. got past that, now hitting the error in the previous email I sent.

On Sun, Jan 15, 2017 at 8:15 PM, Tim Moody  wrote:

>
>
>
> --
> *From:* xsce-de...@googlegroups.com  on
> behalf of Anish Mangal 
> *Sent:* Sunday, January 15, 2017 7:52 AM
> *To:* xsce-devel; server-devel
> *Subject:* [XSCE] xsce on rpi georgehunt's base-6.2
>
> Hi,
>
> now setting up xsce on rpi3 from scratch
> [trying on 2017-01-11-raspbian-jessie-lite.img as base]
>
> log of commands follows #
> # sudo apt-get update [success]
> # sudo apt-get upgrade [success]
> - I don't normally do this one
>
> # apt-get install vim git ansible [success]
> I follow George in using https://github.com/tim-moody/xsce-factory/blob/
> master/scripts/ansible/get-ansible to install ansible (2.2.x)
>
> # mkdir /opt/schoolserver
> # cd /opt/schoolserver
> # git clone https://github.com/georgejhunt/xsce.git [success]
> # cd xsce
> # git branch [success base-6.2]
> # ./runansible [here-we-go!]
> *ERROR: become is not a legal parameter at this level in an Ansible
> Playbook*
>
> Perhaps this is an incorrect version of ansible 1.7.2 which gets installed
> by default. How do I fix this?
>
> become is a new keyword
>
>


-- 
Anish
___
Server-devel mailing list
Server-devel@lists.laptop.org
http://lists.laptop.org/listinfo/server-devel

Re: [Server-devel] [XSCE] xsce on rpi georgehunt's base-6.2

[Tim Moody]

From: xsce-de...@googlegroups.com  on behalf of 
Anish Mangal 
Sent: Sunday, January 15, 2017 7:52 AM
To: xsce-devel; server-devel
Subject: [XSCE] xsce on rpi georgehunt's base-6.2

Hi,

now setting up xsce on rpi3 from scratch
[trying on 2017-01-11-raspbian-jessie-lite.img as base]

log of commands follows #
# sudo apt-get update [success]
# sudo apt-get upgrade [success]
- I don't normally do this one

# apt-get install vim git ansible [success]
I follow George in using 
https://github.com/tim-moody/xsce-factory/blob/master/scripts/ansible/get-ansible
 to install ansible (2.2.x)

# mkdir /opt/schoolserver
# cd /opt/schoolserver
# git clone https://github.com/georgejhunt/xsce.git [success]
# cd xsce
# git branch [success base-6.2]
# ./runansible [here-we-go!]
ERROR: become is not a legal parameter at this level in an Ansible Playbook

Perhaps this is an incorrect version of ansible 1.7.2 which gets installed by 
default. How do I fix this?

become is a new keyword

___
Server-devel mailing list
Server-devel@lists.laptop.org
http://lists.laptop.org/listinfo/server-devel