CS>Why I use CS - And not EIS

[Phil Morrison]

The following article explains how colloidal silver nanoparticles carry
oxygen, convert it to nascent oxygen, which can then disable the
respiratory systems of abnormal cell sites and pathogens.

Only colloidal silver particles can adsorb and process oxygen, not ions.

https://thesilveredge.com/sitearticles/silver-carries-oxygen.shtml

Re: CS>Why I use CS - And not EIS

[Victor Cozzetto]

Hi Phil, Ode,

These are always fun discussions :-) I appreciate your insights. And I
trust everyone in this group to help keep me on point if I should speak in
error. But I am not convinced of an error yet in this discussion, so let me
continue ;-)

As Ode eluded to with his question, CS, EIS, pure colloidal silver, etc...
none of these bring any additional oxygen into the body. Nanoparticles of
silver, by all known references are talking about thousands of silver atoms
held together by metallic bonds. AgNP is 100% pure silver. And yes, the
silver from those nanoparticles grabs oxygen in the body, but that is not
an introduction of new oxygen. In EIS, we do have some introduction of new
oxygen via silver oxide, which are also nanoparticles (but not referred to
as AgNP because they are not pure silver). Remember that a hundred years
ago they put silver nitrate into babies' eyes. It should be noted that all
these silver formulations work against pathogens and support healing.
Consider these points:

1. Oxygen is not the 'power' behind the action of Silver. Silver is the
power. Please keep in mind that silver, and only silver demonstrates
regenerative healing factors in the body that are still beyond full
understanding. Silver somehow triggers stem cell production that is not
fully understood. The insane healing from severe burns and other
gruesome wounds is only possible with silver. We do not yet fully
understand the nature of how and why silver does what it does inside the
human body.

2. Ozone... ozonated water, ten pass ozone treatment, etc., etc. introduces
exponentially more oxygen into the body than any type of silver can. And
yet there is (arguably) no ozone treatment that can match silver for
healing and 'disinfecting' effects within the body. For example, within the
Beck Protocol both ozonated water and colloidal silver are used; however,
the primary job of the ozonated water is actually to reduce Herxheimer
reactions.

3. I would agree with you that CS straight from the generator is best, but
there are some situations where using CS in various protocols is very
useful. As a simple example there is just the issue of maintaining CS in
topical situations, so the creations of gels, paultices, bandages, etc. is
sometimes superior. Other times it is superior to simply keep a finger
soaking in pure EIS (I saw someone that grew back part of a finger via
soaking). There are a great many studies that show the efficacy of silver
combined with zeolite and clay, and lots of anecdotal evidence to support
other combinations. The combination of EIS and MSM is incredibly powerful,
and I use that with clients often. I watched a client eradicate stomach
cancer, ulcers, and polyps with the EIS/MSM combo in less than two
months... confirmed by doctors. EIS and aloe vera is another combo, and
there are many more, such as EIS, DSMO, & Shilajit. All of these are taking
advantage of the unique properties of silver, and not oxygen. I know you
already know all of this stuff, so I am just offering these as a reminder
;-)

I work actively with hundreds of clients, and I can also tell you that
CS/MSM is amazing for things like fistulas and fissures, abscessed teeth,
and more. Lots of my clients buy Silver Puppies or similar devices, so they
are not using any 'pure' CS, and I actually discourage it because I cannot
trust such products.

I think each of these tools can be advantageous in specific situations, so
I do not discount or discredit 'pure' CS or oxygen. But I do find EIS to be
far superior in practice because its cost and ionic content lend it to a
wider array of protocols for many more people.

Perhaps I am wrong about the role that oxygen plays, but I cannot see it in
the research that I am familiar with.
That's my two cents ;-)
Victor
*
Victor F. Cozzetto
Wise Traditions Nutritionist
U.S.: (516) 908-1039
www.Vitagenics.me 
YouTube Channel 
*


On Sun, Jan 24, 2021 at 7:40 AM Ode Coyote 
wrote:

> Are you then referring to "Silver Oxide" nanoparticles?
> metallic silver has no oxygen.
>
> On Sat, Jan 23, 2021 at 3:25 PM Phil Morrison 
> wrote:
>
>> Hi Victor, your comments welcome, as always.
>>
>> The reason I find CS superior to EIS is in the handling of "oxygen" pure
>> and simple.
>>
>> We know most disease results from oxygen deficiency, including cancer.
>> Silver nanoparticles are loaded with oxygen, and are able to travel
>> throughout the body offloading active oxygen on abnormal cell sites and
>> pathogens, which disables their respiratory systems facilitating recovery.
>>
>> Silver ions in EIS lack this simple and obvious ability to provide
>> "active oxygen".
>>
>> Also, I find adding anything to CS, such as clay, zeolite, or whatever,
>> counterproductive.  CS works best straight  from the generator.
>>
>> This is a simplified rendition of a complicated process.  Hope this
>> helps.
>>
>> 

Re: CS>ODE: Clean Silver Puppy

[Ode Coyote]

That can be scrubbed off with AJAX or COMET and a toothbrush...try not to
get any in the electrode sockets.
Mind the water level in the future.

On Sat, Jan 23, 2021 at 4:14 PM JD  wrote:

> Hi Ode,
>
> Just to be clear, this is plated on the bottom of the Silver Puppy, not
> the container. I tried putting H2O2 on a cloth and wiping it off the
> Silver Puppy, but that didn't do anything.  Can I put a little H2O2 in a
> dish (say 1/8 inch) and put the Silver Puppy in that and let it soak for a
> while?  Would that work?  Would that harm the Silver Puppy?
>
> Thanks
>
>
> On 1/23/2021 8:23 AM, Ode Coyote wrote:
>
> What is on the bottom is harmless and 'not' in the water, but unsightly.
> Sometimes it gets really STUCK as plated on silver and silver oxides...
> even scrubbing won't remove it.
> Hydrogen Peroxide dissolves most of it..BUT... rinse any leftover peroxide
> out with distilled water and let the container dry ABSOLUTELY dry as even a
> TRACE of peroxide will make for major changes in the next batch..
> Ode
>
> On Sat, Jan 23, 2021 at 7:41 AM MaryAnn Helland 
> wrote:
>
>> Hi JD -- I'm not Ode, but most of us just wipe it out with a clean paper
>> towel.
>> MA
>>
>> On Friday, January 22, 2021, 09:54:13 AM CST, JD 
>> wrote:
>>
>>
>> Hi Ode,
>>
>> I have a Silver Puppy.  There is black (probably Silver) on bottom.  It
>> is heavier over where the wires are.   What is the best way to clean that?
>>
>>
>> Thanks
>>
>>
>> --
>> The Silver List is a moderated forum for discussing Colloidal Silver.
>>   Rules and Instructions: http://www.silverlist.org
>>
>> Unsubscribe:
>>   
>> Archives:
>>   http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
>>
>> Off-Topic discussions: 
>> List Owner: Mike Devour 
>>
>>
>>

Re: CS>Why I use CS - And not EIS

[Ode Coyote]

Are you then referring to "Silver Oxide" nanoparticles?
metallic silver has no oxygen.

On Sat, Jan 23, 2021 at 3:25 PM Phil Morrison 
wrote:

> Hi Victor, your comments welcome, as always.
>
> The reason I find CS superior to EIS is in the handling of "oxygen" pure
> and simple.
>
> We know most disease results from oxygen deficiency, including cancer.
> Silver nanoparticles are loaded with oxygen, and are able to travel
> throughout the body offloading active oxygen on abnormal cell sites and
> pathogens, which disables their respiratory systems facilitating recovery.
>
> Silver ions in EIS lack this simple and obvious ability to provide "active
> oxygen".
>
> Also, I find adding anything to CS, such as clay, zeolite, or whatever,
> counterproductive.  CS works best straight  from the generator.
>
> This is a simplified rendition of a complicated process.  Hope this helps.
>
> PLM
> Chemist
>