CS>Re[2]: CS>Re[2]: CS>My Second Batch
Hi Raine, Well I havent timed it much, but I image somewhere between 2 to 4 hours sometimes longer. I just go by how often I have to clean and occasionally I check it with the TDS meter. Each batch varies with time and strength Take care, V > Thank so much, V. It's good to know that others have this fuzz issue. > How long do you brew? > -Raine > V wrote: >>Hi Raine, >> >>Yes that is normal. I clean my rods more often than that. they bulid >>up fuzz faster as the concentration goes up. Agter several hours you cant >>clean them fast enough nad then I stop the precess, it makse me very >>strang CS that is totally clear. and lasts a long time in the cupboard, >>it never turns grey or golden. I jsut use two 99.999 siver rods of 12 >>gauge and have it connected to a 30 volt DC wall wart, and I bubble air >>through the water while it going. I have made it as high as 53 ppm >>measured with a Hanna TDS meter, mostly though it comes out between 25 >>and 30 ppm. I make it in a 32 Oz jar also. using Kmart distilled water >>that measures 1 PPM when I start. >> >>the bubbling provides stirring so that the concentration aronud the >>electrodes remains even with the surronuding water all the time. I >>imagine tha has a simialar effect on the process, as a constant current >>device, by not letting too much conduction happen in the immediate area >>of the electrodes. thats my theory about it anyway. >> >>Take care, >> V >> >> -- -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour
Re: CS>Re[2]: CS>My Second Batch
Thank so much, V. It's good to know that others have this fuzz issue. How long do you brew? -Raine V wrote: Hi Raine, Yes that is normal. I clean my rods more often than that. they bulid up fuzz faster as the concentration goes up. Agter several hours you cant clean them fast enough nad then I stop the precess, it makse me very strang CS that is totally clear. and lasts a long time in the cupboard, it never turns grey or golden. I jsut use two 99.999 siver rods of 12 gauge and have it connected to a 30 volt DC wall wart, and I bubble air through the water while it going. I have made it as high as 53 ppm measured with a Hanna TDS meter, mostly though it comes out between 25 and 30 ppm. I make it in a 32 Oz jar also. using Kmart distilled water that measures 1 PPM when I start. the bubbling provides stirring so that the concentration aronud the electrodes remains even with the surronuding water all the time. I imagine tha has a simialar effect on the process, as a constant current device, by not letting too much conduction happen in the immediate area of the electrodes. thats my theory about it anyway. Take care, V
CS>Re[2]: CS>My Second Batch
Hi Raine, Yes that is normal. I clean my rods more often than that. they bulid up fuzz faster as the concentration goes up. Agter several hours you cant clean them fast enough nad then I stop the precess, it makse me very strang CS that is totally clear. and lasts a long time in the cupboard, it never turns grey or golden. I jsut use two 99.999 siver rods of 12 gauge and have it connected to a 30 volt DC wall wart, and I bubble air through the water while it going. I have made it as high as 53 ppm measured with a Hanna TDS meter, mostly though it comes out between 25 and 30 ppm. I make it in a 32 Oz jar also. using Kmart distilled water that measures 1 PPM when I start. the bubbling provides stirring so that the concentration aronud the electrodes remains even with the surronuding water all the time. I imagine tha has a simialar effect on the process, as a constant current device, by not letting too much conduction happen in the immediate area of the electrodes. thats my theory about it anyway. Take care, V > Hello again, MA! > My first batch was 32 oz brewed for one hour. I made a batch today- 32 > oz brewed for 2 hours with no heat. During that period I had to clean > the rods three times because of the *fuzz*. Is this a normal thing? > My end result is quite clear. I hope to find a laser pen tomorrow, so I > will have some idea of the TE. > Thanks again for your very helpful suggestions! > -Raine > marmar...@aol.com wrote: >> *The spacing that works well for me is the width of the neck of a >> Mason jar -- about 2". I just always do well using a one-quart Mason >> jar. And I think I gave you a bad steer in my previous post -- I was >> thinking that a quart was 16 ozs. and it's 32 ozs. That's what you >> started with, right? There's nothing at all wrong with your set-up -- >> you just need to give it more time than your original try at 1 hour. >> If you skip the heating, you'll have an easier time of controlling the >> situation. What you want at the end of brewing is a clear colloid, >> slightly metallic in taste and if you can afford an inexpensive laser >> penlight and you shine it into the colloid, you should see the light >> *beam*, not an entire lighted up jar of water. There's no telling how >> many ppms you will have produced -- anywhere from 5 to 15 will be my >> guess -- and it's all good. That's about it. I don't know why I've >> got this large font all of a sudden -- sorry. MA* -- -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour