[Smartmontools-database] Kingston SSDNow UV400 SATA 120GB
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-21-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: KINGSTON SUV400S37120G Firmware Version: 0C3K87RA User Capacity:120,034,123,776 bytes [120 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate:Solid State Device Form Factor: 2.5 inches Device is:Not in smartctl database [for details use: -P showall] ATA Version is: Unknown(0x0ffe), ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is:Mon May 29 15:58:24 2017 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 0 (reserved) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection:(5) seconds. Offline data collection capabilities:(0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities:(0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability:(0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time:( 2) minutes. Extended self-test routine recommended polling time:( 5) minutes. Conveyance self-test routine recommended polling time:( 0) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 48 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGSVALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 000-0 5 Reallocated_Sector_Ct PO--CK 100 100 010-0 9 Power_On_Hours -O--CK 100 100 000-101 12 Power_Cycle_Count -O--CK 100 100 000-18 100 Unknown_Attribute -O--CK 100 100 000-197504 101 Unknown_Attribute -O--CK 100 100 000-60960 170 Unknown_Attribute -O--CK 100 100 000-0 171 Unknown_Attribute -O--CK 100 100 000-0 172 Unknown_Attribute -O--CK 100 100 000-0 174 Unknown_Attribute -O--CK 100 100 000-15 175 Program_Fail_Count_Chip -O--CK 100 100 000-0 176 Erase_Fail_Count_Chip -O--CK 100 100 000-0 177 Wear_Leveling_Count -O--CK 100 100 000-116 178 Used_Rsvd_Blk_Cnt_Chip -O 100 100 000-0 180 Unused_Rsvd_Blk_Cnt_Tot -O 100 100 000-669 183 Runtime_Bad_Block -O--CK 100 100 000-2 187 Reported_Uncorrect PO--CK 100 100 000-0 194 Temperature_Celsius -O---K 030 100 000-30 (Min/Max 17/35) 195 Hardware_ECC_Recovered -O--CK 100 100 000-0 196 Reallocated_Event_Count -O--CK 100 100 000-0 197 Current_Pending_Sector -O--CK 100 100 000-0 199 UDMA_CRC_Error_Count-O--C- 100 100 000-0 201 Unknown_SSD_Attribute -O--CK 100 100 000-0 204 Soft_ECC_Correction -O--CK 100 100 000-0 231 Temperature_Celsius -O--CK 100 100 000-0 233 Media_Wearout_Indicator -O--CK 100 100 000-377 234 Unknown_Attribute -O--CK 100 100 000-358 241 Total_LBAs_Written -O--CK 100 100 000-361 242 Total_LBAs_Read
Re: [Smartmontools-database] maxtor d3 station 2tb
On Fri, Apr 7, 2017 at 8:46 AM, Christian Franke <christian.fra...@t-online.de> wrote: > "Mailing Lists" wrote: >> >> # smartctl -i /dev/sda >> smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-71-generic] (local >> build) >> Copyright (C) 2002-16, Bruce Allen, Christian Franke, >> www.smartmontools.org >> >> /dev/sda: Unknown USB bridge [0x0bc2:0x6123 (0x209)] > > > Added to my TODO list. > Thank you! >> `smartctl -q noserial -x /dev/sda -dsat > >> smartctl-maxtor-d3-station-2tb.txt` produces this kernel message on >> kernel 4.4.0-71-generic 64 bit (ubuntu xenial) >> >> [Apr 4 12:36] sd 5:0:0:0: [sda] tag#0 FAILED Result: >> hostbyte=DID_ERROR driverbyte=DRIVER_SENSE >> [ +0.14] sd 5:0:0:0: [sda] tag#0 Sense Key : Hardware Error >> [current] [descriptor] >> [ +0.07] sd 5:0:0:0: [sda] tag#0 Add. Sense: No additional sense >> information >> [ +0.10] sd 5:0:0:0: [sda] tag#0 CDB: ATA command pass >> through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 > > > This is the SCSI command SAT ATA-PASS-THROUGH for the ATA command SMART > RETURN STATUS. It returns its result (PASSED/FAILED) via SCSI sense. The > kernel should not log this as the SCSI sense does not indicate an error in > this case. > > Please provide output of 'smartctl -r ioctl,2 -q noserial -d sat -H > /dev/sda' > (it's sdb now after a reboot) root@linux:~# smartctl -r ioctl,2 -q noserial -d sat -H /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-72-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE Input: FR=, SC=0x01, LL=, LM=, LH=, DEV=, CMD=0xec IN [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 20 34 57 33 5a 4c 4e 34 44 00 00 00 00 04 00 43 43 30 36 34 20 20 20 20 54 53 30 32 30 30 4d 44 30 30 40 2d 31 45 31 31 52 34 36 20 20 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 60 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 10 50 ff ff ff 0f 00 00 07 04 80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e 85 04 00 cc 00 40 00 a0 f0 03 1f 00 6b 34 69 7d 63 41 69 34 49 bc 63 41 b0 7f 00 65 00 65 00 80 80 fe ff 00 00 d0 d0 00 00 c0 00 00 00 00 00 00 00 00 b0 88 e0 e8 00 00 00 00 d0 00 00 00 00 03 60 00 00 00 50 00 c5 45 9b 28 c9 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5e 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Duration: 0.001s] REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE returned 0 = [IDENTIFY DEVICE] DATA START (BASE-16) = 000-015: 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |Z..?7...?...| 016-031: 00 00 00 00 58 58 58 58 58 58 58 58 58 58 58 58 || 032-047: 58 58 58 58 58 58 58 58 00 00 00 00 04 00 43 43 |..CC| 048-063: 36 34 20 20 20 20 54 53 30 32 30 30 4d 44 30 30 |64TS0200MD00| 064-079: 2d 31 45 31 31 52 34 36 20 20 20 20 20 20 20 20 |-1E11R46| 080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 | ..| 096-111: 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 |.@./.@...?..| 112-127: 3f 00 10 fc fb 00 10 50 ff ff ff 0f 00 00 07 04 |?..P| 128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 |..x.x.x.x...| 144-159: 00 00 00 00 00 00 1f 00 0e 85 04 00 cc 00 40 00 |..@.| 160-175: f0 03 1f 00 6b 34 69 7d 63 41 69 34 49 bc 63 41 |k4i}cAi4I.cA| 176-191: 7f 00 65 00 65 00 80 80 fe ff 00 00 d0 d0 00 00 |..e.e...| 192-207: 00 00 00 00 00 00 00 00 b0 88 e0 e8 00 00 00 00 || 208-223: 00 00 00 00 03 60 00 00 00 00 00 00 00 00 00 00 |.`..| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5e 40 |..^@| 240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..| 256-271: 21 00 b0 88 e0 e8 b0 88 e0 e8 20 20 02 00 40 01 |!. ..@.| 272-287: 00 01 00 50 06 3c 0a 3c 00 00 3c 00 00 00 08 00 |...P.<.<..<.| 288-303: 00 00 00 00 ff 05 80 02 00 00 00 00 08 00 00 00 || 304-319: 00 00 00 00 00 00 00 80 00 00 00 00 00 58 00 80 |.X..| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 || 336-351: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 || 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 || 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 || 384-39
[Smartmontools-database] maxtor d3 station 2tb
# smartctl -i /dev/sda smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-71-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sda: Unknown USB bridge [0x0bc2:0x6123 (0x209)] Please specify device type with the -d option. Use smartctl -h to get a usage summary `smartctl -q noserial -x /dev/sda -dsat > smartctl-maxtor-d3-station-2tb.txt` produces this kernel message on kernel 4.4.0-71-generic 64 bit (ubuntu xenial) [Apr 4 12:36] sd 5:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [ +0.14] sd 5:0:0:0: [sda] tag#0 Sense Key : Hardware Error [current] [descriptor] [ +0.07] sd 5:0:0:0: [sda] tag#0 Add. Sense: No additional sense information [ +0.10] sd 5:0:0:0: [sda] tag#0 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-71-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST2000DM001-1ER164 Firmware Version: CC46 User Capacity:2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate:7200 rpm Form Factor: 3.5 inches Device is:In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is:Tue Apr 4 11:55:20 2017 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection:( 80) seconds. Offline data collection capabilities:(0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities:(0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability:(0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time:( 1) minutes. Extended self-test routine recommended polling time:( 210) minutes. Conveyance self-test routine recommended polling time:( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGSVALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 099 006-67640768 3 Spin_Up_TimePO 097 096 000-0 4 Start_Stop_Count-O--CK 100 100 020-17 5 Reallocated_Sector_Ct PO--CK 100 100 010-0 7 Seek_Error_Rate POSR-- 100 253 030-119731 9 Power_On_Hours -O--CK 099 099 000-950 10 Spin_Retry_CountPO--C- 100 100 097-0 12 Power_Cycle_Count -O--CK 100 100 020-14 183 Runtime_Bad_Block -O--CK 100 100 000-0 184 End-to-End_Error-O--CK 100 100 099-0 187 Reported_Uncorrect -O--CK 100 100 000-0 188 Command_Timeout -O--CK 100 100 000-0 0 0 189 High_Fly_Writes -O-RCK 100 100 000-0 190 Airflow_Temperature_Cel -O---K 057 048 045-43 (Min/Max 41/48) 191 G-Sense_Error_Rate -O--CK 100 100 000-0 192 Power-Off_Retract_Count -O--CK 100 100 000-3 193 Load_Cycle_Count-O--CK 098 098 000-5674 194