RE: Looking for a 3D-scanner

2018-06-20 Thread Sven Constable 
Received the scanner (the SE model) yesterday and already used it for a 
project. With only one day of practice I got acceptable results, so I'm 
satisfied. The software seems to be targeted to home users, as only a very few 
options are available. Overall the GUI looks like a beta version of a software 
from the nineties. Messages and windows popping up in the background instead of 
the foreground, it has a teamviewer option for whatever reason, it doesn't 
remember file pathes and the english translation is the chinese way. The 
cheaper SE model I bought is a bit unsteady because of the plastic parts but 
works.

However, under the hood it puts out good meshes, of course also depending on 
the preparation of the objects. Point cloud computations and meshing uses all 
cores most of the times.

Even if an objects got a perfectly flat und dull surface, if it has different 
areas of brightness (read color) like a logo or letterings, these will come out 
as depth information. Only lightly but visible in the resulting scan.  Since 
the idea of 3d scanning is not capturing perfectly smooth surfaces but uneven 
and complex surfaces, I would not consider it as a contra. Maybe this was also 
because of the cheap crayon spray I used which created tiny sprinkles on the 
surface . I will try developer spray and see how this works.

Besides the poly formats, it can output point cloud data to be meshed later on.

 

If you're interested, I uploaded an example of a scanned lemon. I used 3-5 scan 
runs I think, with 20 degrees/ 18 steps each. Meshed in high detail with 10 
percent mesh density. Seems to me that the mesh resolution is always much 
higher than the average scan resolution you may achive with an average object. 
In other words you will hit the limits in scanning (due to bad preparation of 
the object or difficult objects) much earlier than what the meshing algorithm 
can put out.

 

 
<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.imagefront.de_tmp_fruit-5Fhigh-5Fdetail-5F10-5Fpercent.fbx&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=jwNeEyWuiKdmkO7Cwz5eFxz-Cja0Crbumhpwyp63Fc0&s=t9IJtLuJOSVQXNKJm9boagq1Ge9dSLx0CKmZvKX6kkk&e=>
 www.imagefront.de/tmp/fruit_high_detail_10_percent.fbx

 

FBX would be nice but is not supported by the scanner. I used STL for direct 
import to XSI. Or OBJ if texture is needed.

 

Sven

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Chris Marshall
Sent: Friday, 15 June 2018 17:02
To: Official Softimage Users Mailing List. 
https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=jwNeEyWuiKdmkO7Cwz5eFxz-Cja0Crbumhpwyp63Fc0&s=X3mFFXp-1EoSDa_strG1XAAGTo4UEC4Fe_yur0J-Npk&e=
Subject: Re: Looking for a 3D-scanner

 

Let us know how you get on. i assume photogrammetry is no good? Photoscan.

 

 

On 15 June 2018 at 10:37, Sven Constable  wrote:

Well, all kinds of things. Food products for example. Maybe these will not work 
very well, because I probably cannot flip a fancy cake upside down for a second 
scan run :) Also not every object will work with spray crayon.

Currently I need  a packaging that got crumpled aluminum foil on it. I could 
model it but a scan will surely help. Even the scan will not be perfect I can 
use parts of it, clean and model the rest by hand. 

I already ordered the scanner and will see how it works out.

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Chris Marshall
Sent: Friday, 15 June 2018 10:12


To: Official Softimage Users Mailing List. 
https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=jwNeEyWuiKdmkO7Cwz5eFxz-Cja0Crbumhpwyp63Fc0&s=X3mFFXp-1EoSDa_strG1XAAGTo4UEC4Fe_yur0J-Npk&e=
Subject: Re: Looking for a 3D-scanner

 

What type of things are you thinking of scanning?

 

 

On 14 June 2018 at 22:55, Sven Constable  wrote:

Thanks Andy for the vids. Nice reviews of the Einscans. I think the SE model 
could be sufficient for my needs.

 

Regardings that Cappasity tool: That’s not a 3d scanner, it just creates 
turntable movies.

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of F Sanchez
Sent: Thursday, 14 June 2018 22:46
To: Official Softimage Users Mailing List. 
https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=jwNeEyWuiKdmkO7Cwz5eFxz-Cja0Crb

Re: Looking for a 3D-scanner

2018-06-15 Thread Petr Zloty 
I would go with photogrammetry instead, Reality Capture is quite cheap,
fast and can produce very good results (better then Agisoft Photoscan), I
had good results with Zephyr too (This one is free up to 50 images). You
can project/spray pattern to add texture, use a matte spray, cross
polarization (except on shiny metals) and reconstructed details could be
pretty good too, especially in your use case when you have controlled
environment and static objects.

2018-06-15 18:18 GMT+02:00 Sven Constable :

> To be honest, I didn't think about photogrammetry. My limited knowledge
> about that its' great for props which get detail through the scanned
> texture with a semi detailed geometry as an underlying "structure" to give
> correct depth. The packshots I do will not use any textures from the scan
> in most cases. So the detail has to come from the geo itself.
>
>
>
> *From:* softimage-boun...@listproc.autodesk.com [mailto:softimage-bounces@
> listproc.autodesk.com] *On Behalf Of *Chris Marshall
> *Sent:* Friday, 15 June 2018 17:02
>
> *To:* Official Softimage Users Mailing List. 
> https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=rFUn6tkKXGBi150O3R4wCLwIk3xcy61ujwcptyO6nAs&s=zYbpFEEE-MxakmUIqgLQUSVV8yk7D6mb81vI-mYzBAQ&e=
> forum/#!forum/xsi_list
> *Subject:* Re: Looking for a 3D-scanner
>
>
>
> Let us know how you get on. i assume photogrammetry is no good? Photoscan.
>
>
>
>
>
> On 15 June 2018 at 10:37, Sven Constable  wrote:
>
> Well, all kinds of things. Food products for example. Maybe these will
> not work very well, because I probably cannot flip a fancy cake upside down
> for a second scan run :) Also not every object will work with spray crayon.
>
> Currently I need  a packaging that got crumpled aluminum foil on it. I
> could model it but a scan will surely help. Even the scan will not be
> perfect I can use parts of it, clean and model the rest by hand.
>
> I already ordered the scanner and will see how it works out.
>
>
>
> *From:* softimage-boun...@listproc.autodesk.com [mailto:softimage-bounces@
> listproc.autodesk.com] *On Behalf Of *Chris Marshall
> *Sent:* Friday, 15 June 2018 10:12
>
>
> *To:* Official Softimage Users Mailing List. 
> https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=rFUn6tkKXGBi150O3R4wCLwIk3xcy61ujwcptyO6nAs&s=zYbpFEEE-MxakmUIqgLQUSVV8yk7D6mb81vI-mYzBAQ&e=
> forum/#!forum/xsi_list
> <https://u7507473.ct.sendgrid.net/wf/click?upn=5SmYwFIJXHmC5X9wAP0G6iB4H67OtDu1LYz6krlc8-2FqBeLCXrELBQVbfMn71cNywwCM9MLKQNt6NvY2bdnUVgiRuzEw0g0OZUwVhB4KIDvkjTtq34l13Jmfjgwg01isCCK511SfOUct9zBCzgDFFRDQYDmMAnI51v58fSyJgwB-2Bw0HHExUkkOtQLVEEC4Qhtsu4bZyg5N-2FfAtwcPMobUPdkvDj8QW0p8f4FTefP2WavKn-2Fx65NPPlm7AfadGWXCfkHc9qfaMqjIImPprDPCrSzZ2VKrm3aO-2FQ-2BbdhcdcgirtEg4r6Id0hVef-2FpU1yTe6T9cdWQd0n3ZMWIoXhYpZRhwrFiH0HsCo2dnuF4wP549NX-2FDYXiWyxF1V6-2F1QCSMMy3S1xlT-2Fi1ChrnnlCJfGOzz7WMSt1T-2BrH0FDyG5U9ODUOg8oJxJoMA-2F5z0btvf4WgDxlFPonPVoRp74VnshrXbqSINBKgQqrBlozfQ58Nxyc4DD3dwwaWtiPL3-2BxCJ03HIWO69ZcWo5kPhRqJmeVO6fChSkAny2sURIiyhimquw-2Bt3IT8ufMsBwRhhFqy5hnPui8hwwkoRG8-2FjbTRB3xL00ktqZo2zbcRLABDvuLRd-2FIrPh4rsw250ms0l6jaW-2Bg2w2kx5Qb4jepsbQ2JNPutrjs4YIQlNjqmZ56cptpY85Z8dTpQe3g5UCepdqagC0Uny1jB1DecpLZi9VDLyr0fce69oBVfT6DfwW49TE-2By-2BRBWqeL9HlANG4Y6jFldGlCxmYGCwggFRv-2F82HxfVOFxXn9XSZOcWD7ijQ4PfqSi8fdZXfXg8060vtmEvEKFmZkXL9XCkmymaDwvng5yPEJwB-2BwTndFfUxgTfuayaR7dTD4-2FQVp-2FWT1vMpXKCJFXaJL4QhPWDmYejVOQY1czCV5RpVMdunBcHRyvaAhmWdtya4shkQVjeVB3Qjm-2B5HzaivA5xfOvkEkQa6hz1D8D6HwCFaZ6g8jnpg0PEWIgp6C8-2Bw-3D_C2mGf0r7yfAzY-2FA2bURXvvFuCelpK1i-2BZBoZQDloTx1XhRDeQju15ouEr2SJVY-2BMb6LGLBKxkE-2BzTn54EcSYh9wKR7libQAIc3-2BnZYmnszKIRZFVAlW0PSpaapOlNMdeZ8E4hlWXcoUNHh-2Bg1XF1Lwo9tKS9tjWe5BNZPyuVp6iRL2sM1RE6bl12VigLGaRkDQUBMOlzKWGig30qmKMFj-2BxMOs4AbSgjmtQvajyH1ac-3D>
> *Subject:* Re: Looking for a 3D-scanner
>
>
>
> What type of things are you thinking of scanning?
>
>
>
>
>
> On 14 June 2018 at 22:55, Sven Constable  wrote:
>
> Thanks Andy for the vids. Nice reviews of the Einscans. I think the SE
> model could be sufficient for my needs.
>
>
>
> Regardings that Cappasity tool: That’s not a 3d scanner, it just creates
> turntable movies.
>
>
>
> *From:* softimage-boun...@listproc.autodesk.com [mailto:softimage-bounces@
> listproc.autodesk.com] *On Behalf Of *F Sanchez
> *Sent:* Thursday, 14 June 2018 22:46
> *To:* Official Softimage Users Mailing List. 
> https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_&d=DwIFaQ

RE: Looking for a 3D-scanner

2018-06-15 Thread Sven Constable 
To be honest, I didn't think about photogrammetry. My limited knowledge about 
that its' great for props which get detail through the scanned texture with a 
semi detailed geometry as an underlying "structure" to give correct depth. The 
packshots I do will not use any textures from the scan in most cases. So the 
detail has to come from the geo itself.

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Chris Marshall
Sent: Friday, 15 June 2018 17:02
To: Official Softimage Users Mailing List. 
https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=Kec45eBxS4rCCGh6fahvdtQdF0fSkYNJdhWx8DEi7b4&s=FUjJo_TlDJgQFCg2SbY41oTIsceRRa_SCVmXPFJLfB8&e=
Subject: Re: Looking for a 3D-scanner

 

Let us know how you get on. i assume photogrammetry is no good? Photoscan.

 

 

On 15 June 2018 at 10:37, Sven Constable  wrote:

Well, all kinds of things. Food products for example. Maybe these will not work 
very well, because I probably cannot flip a fancy cake upside down for a second 
scan run :) Also not every object will work with spray crayon.

Currently I need  a packaging that got crumpled aluminum foil on it. I could 
model it but a scan will surely help. Even the scan will not be perfect I can 
use parts of it, clean and model the rest by hand. 

I already ordered the scanner and will see how it works out.

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Chris Marshall
Sent: Friday, 15 June 2018 10:12


To: Official Softimage Users Mailing List. 
https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=Kec45eBxS4rCCGh6fahvdtQdF0fSkYNJdhWx8DEi7b4&s=FUjJo_TlDJgQFCg2SbY41oTIsceRRa_SCVmXPFJLfB8&e=
Subject: Re: Looking for a 3D-scanner

 

What type of things are you thinking of scanning?

 

 

On 14 June 2018 at 22:55, Sven Constable  wrote:

Thanks Andy for the vids. Nice reviews of the Einscans. I think the SE model 
could be sufficient for my needs.

 

Regardings that Cappasity tool: That’s not a 3d scanner, it just creates 
turntable movies.

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of F Sanchez
Sent: Thursday, 14 June 2018 22:46
To: Official Softimage Users Mailing List. 
https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=Kec45eBxS4rCCGh6fahvdtQdF0fSkYNJdhWx8DEi7b4&s=FUjJo_TlDJgQFCg2SbY41oTIsceRRa_SCVmXPFJLfB8&e=
Subject: Re: Looking for a 3D-scanner

 

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DbzZKWlHzxrw&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=Kec45eBxS4rCCGh6fahvdtQdF0fSkYNJdhWx8DEi7b4&s=I5Z9ffPOdFly02_Jra9MCoG3EanuDT7SWLFyqm2ENKA&e=




https://urldefense.proofpoint.com/v2/url?u=https-3A__sanchezfilms.wixsite.com_rebel&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=Kec45eBxS4rCCGh6fahvdtQdF0fSkYNJdhWx8DEi7b4&s=IxqibFnlqzOvMurMvs-aw0hyquPE5NJlCZGhYl07KEM&e=

 

 

On Thu, Jun 14, 2018 at 3:29 PM, Andy Chlupka (Goehler) 
 wrote:

Have you seen these videos?

 

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DoGwcOrsWSjo&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=Kec45eBxS4rCCGh6fahvdtQdF0fSkYNJdhWx8DEi7b4&s=t8g-LsqwSyA4CbR2p2CWLTkf-YZx97i6kA-sYIbOAx8&e=

 

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DgUuRZdz0hz8&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=Kec45eBxS4rCCGh6fahvdtQdF0fSkYNJdhWx8DEi7b4&s=I5HyY-oBZfnK-1wLmsrc-yWokXIX8y10np0YKXPdxPs&e=

 

I’ve been following both YouTubers for a long time and I like their content. 
Maybe these videos help you out. 

 

Cheers

 

Andy

 

 

On Jun 14, 2018, at 5:51 PM, Sven Constable  wrote:

 

Hey list,

as I did a lot of product renderings lately, I was thinking about buying a 3D 
scanner to reduce modeling time. Doesn't need to be top notch but should be a 
professional and good scanner so I think in the range of maybe 1 to 2k 
dollars/euros? I checked out a few from low budget (couple hundred bucks, 
disregarded them immediatly) to high budget (several thousands)  and came up 
with th

Re: Looking for a 3D-scanner

2018-06-15 Thread Chris Marshall 
Let us know how you get on. i assume photogrammetry is no good? Photoscan.


On 15 June 2018 at 10:37, Sven Constable  wrote:

> Well, all kinds of things. Food products for example. Maybe these will
> not work very well, because I probably cannot flip a fancy cake upside down
> for a second scan run :) Also not every object will work with spray crayon.
>
> Currently I need  a packaging that got crumpled aluminum foil on it. I
> could model it but a scan will surely help. Even the scan will not be
> perfect I can use parts of it, clean and model the rest by hand.
>
> I already ordered the scanner and will see how it works out.
>
>
>
> *From:* softimage-boun...@listproc.autodesk.com [mailto:softimage-bounces@
> listproc.autodesk.com] *On Behalf Of *Chris Marshall
> *Sent:* Friday, 15 June 2018 10:12
>
> *To:* Official Softimage Users Mailing List. 
> https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=B8r-BNnR0ZcOEKd-A1vLgfzQ_azkpKD6ZqfLEv-0g60&s=6S4ZNjajwjn3CvUf15L-FgtoC6wr4zAQfG54cDnor9M&e=
> forum/#!forum/xsi_list
> *Subject:* Re: Looking for a 3D-scanner
>
>
>
> What type of things are you thinking of scanning?
>
>
>
>
>
> On 14 June 2018 at 22:55, Sven Constable  wrote:
>
> Thanks Andy for the vids. Nice reviews of the Einscans. I think the SE
> model could be sufficient for my needs.
>
>
>
> Regardings that Cappasity tool: That’s not a 3d scanner, it just creates
> turntable movies.
>
>
>
> *From:* softimage-boun...@listproc.autodesk.com [mailto:softimage-bounces@
> listproc.autodesk.com] *On Behalf Of *F Sanchez
> *Sent:* Thursday, 14 June 2018 22:46
> *To:* Official Softimage Users Mailing List. 
> https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=B8r-BNnR0ZcOEKd-A1vLgfzQ_azkpKD6ZqfLEv-0g60&s=6S4ZNjajwjn3CvUf15L-FgtoC6wr4zAQfG54cDnor9M&e=
> forum/#!forum/xsi_list
> <https://u7507473.ct.sendgrid.net/wf/click?upn=5SmYwFIJXHmC5X9wAP0G6iB4H67OtDu1LYz6krlc8-2FqBeLCXrELBQVbfMn71cNywwCM9MLKQNt6NvY2bdnUVgiRuzEw0g0OZUwVhB4KIDvkjTtq34l13Jmfjgwg01isCCK511SfOUct9zBCzgDFFRDQYDmMAnI51v58fSyJgwB-2Bw0HHExUkkOtQLVEEC4Qhtsu4bZyg5N-2FfAtwcPMobUPdkvDj8QW0p8f4FTefP2WavKn-2Fx65NPPlm7AfadGWXCfkHc9qfaMqjIImPprDPCrSzZ2VKrm3aO-2FQ-2BbdhcdcgirtEg4r6Id0hVef-2FpU1yTe6T9cdWQd0n3ZMWIoXhYpZRhwrFiH0HsCo2dnuF4wP549NX-2FDYXiWyxF1V6-2F1QCSMMy3S1xlT-2Fi1ChrnnlCJfGOzz7WMSt1T-2BrH0FDyG5U9ODUOg8oJxJoMA-2F5z0btvf4WgDxlFPonPVoRp74VnshrXW6FSQhm9FaYZqvArk7ImENGS6qxFLfxblgA6ZI4fpmt1sJa9vQtTQuT9s9dHJZfWr2pD4Sur68g3e5IRL2Ixw0M9ORHuMY-2BhX7qDbyjnjKjJkLse5o-2FVjEigjl135-2BYRyMegM6rWqxiFabbyjGwL9JYpphNu-2FUoeKVg7OzLrrz-2BtPhJuT4vMMER1lXL3W1gaO5kkIuStrAcKqf6tWXKeXPDIcgvhjqOJBoD2DVOZiQ6kZzeBeENIuHy7jqkUsW0GzXaF-2BOi7UDDGPgQj3ajY8U-2BQ8knaNjP5-2B0rkuRbDGD97yPz-2FeptUhXVFTIlneN2foBE0YtdQHGYL-2Fy3gf-2BL3pfCR-2B-2B0kDv6-2Bh5cyTkN9hy9CN5tiS9xH5iMcSAppzzRau9lb0m7V9q1P5TA3Gs7xvGTWCTCP0ZBuzYYfa0wdyAIVXD7xQazRbR92Uwm3zL1w-2BTycqUr4SUhSmY4wL-2B6A06zkSRBN0x3VAzuPOX1oo-2B3ZEyx-2FJVsH20DzD3L5cp5Tf4z6SyPDCwwyBSXhaAWvNY7o7Pfw6BPnGQJqUDEqOxj_xehmKS4q8NIxWTEDex9M-2FXPR-2FFr63CJ6w4COI-2BdJC5GnG5XUB6W1KBS3gLhCirsmAO7Gw1byktWr-2F-2F2QyXqY67QdUXcytqykJu8nysyAi7NVB-2BKY01hteIEboVEbDHmg9b6ouS0Sj7-2FhOFjBGrtowuxZQoyoUCt5AR-2BOxFg-2B8gN3WLUVQuyLzR7qp3r31syV2T-2BxgjtwGuJNCZKHvMDTrx9eB1WDcTRIE0nnG-2FnGL9Q-3D>
> *Subject:* Re: Looking for a 3D-scanner
>
>
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DbzZKWlHzxrw&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=B8r-BNnR0ZcOEKd-A1vLgfzQ_azkpKD6ZqfLEv-0g60&s=wkcwVgSPDcG8Gy7dwYvRvk5ELxPIjQKeAw3ldlkn2fI&e=
> <https://u7507473.ct.sendgrid.net/wf/click?upn=5SmYwFIJXHmC5X9wAP0G6iB4H67OtDu1LYz6krlc8-2FqBeLCXrELBQVbfMn71cNywwCM9MLKQNt6NvY2bdnUVgo3ga6X6AbaGT-2Fd7ob90wVGbm6Qf5hW0ivxnEGxvzj1nWazkybWc26Iz8UMdS25EOduMrZGHYMiH0p52YteffmLtYGYbLGECLRyRsZ5K4qoNJnN9jLfEubIVBN-2Bh-2BPqTDnyIax0ewKAvEqd96FFup0xSf5yyjU-2BS091wjtIJwfycLuZZVFGWGeCSv7Tyes-2BIWNgOCUAfSGBjXkvHTeuqnae0-2BJJECv0AeOgNxmP-2BxG4FHIsQogmH8inL-2FicM-2Fo520aYct7eCwPhk8W67NmQVw1z0RDLIfFmF1cf-2BG1Z6n-2FzTpXQxB6LpkUtqckWBiTH4EHILNk9GU5tUDhR5n5LtT6r4XUIA1BTiMcQyoKk-2BUXUDnfAQOUdzZEyfjSpzg0EqzkglXPnuxEGmNP-2B-2BC9cpWhJCX-2B-2BD1K2z-2BWaE-2FbVeVY14Fd-2FymTAZMXrK8-2F3nwqz1zCAqogc6U6vdnZb1CSE9hJtDiKDV-2BMklBGbvvnNZ8LtJ9SxJ-2BOmHlGij8d3H09Bnh7ZETmWsHaMxtMgzv50R-2Fhhi2ZtuyuUVloH3zPEnDqK4CiOhA8YmwLik-2BCBVIIVJPlhidZttQ1ooafsujjxxjht9m6yiXms2xcZHlidbwXCUndlNJQv9XQgSzaCjXm3Jlrzrkn1ekEYd8LSFsmW0MKdN-2FeXropHadHK8DMpZGzjGcRrWuucIV9P5gFT8ub1AbRImsQdWM-2ByvAXHGwsasTgUHiBtys-2BRtPH23KoYTSf

RE: Looking for a 3D-scanner

2018-06-15 Thread Sven Constable 
Well, all kinds of things. Food products for example. Maybe these will not work 
very well, because I probably cannot flip a fancy cake upside down for a second 
scan run :) Also not every object will work with spray crayon.

Currently I need  a packaging that got crumpled aluminum foil on it. I could 
model it but a scan will surely help. Even the scan will not be perfect I can 
use parts of it, clean and model the rest by hand. 

I already ordered the scanner and will see how it works out.

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Chris Marshall
Sent: Friday, 15 June 2018 10:12
To: Official Softimage Users Mailing List. 
https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=bNMBdl1UKO5z_IwbPhLDY9bAABqwL9rP47uFttAOwu4&s=G96e-UwRzsH0bdWqqFDzDo0eXfV0JU1nxrWOopF65Ms&e=
Subject: Re: Looking for a 3D-scanner

 

What type of things are you thinking of scanning?

 

 

On 14 June 2018 at 22:55, Sven Constable  wrote:

Thanks Andy for the vids. Nice reviews of the Einscans. I think the SE model 
could be sufficient for my needs.

 

Regardings that Cappasity tool: That’s not a 3d scanner, it just creates 
turntable movies.

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of F Sanchez
Sent: Thursday, 14 June 2018 22:46
To: Official Softimage Users Mailing List. 
https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=bNMBdl1UKO5z_IwbPhLDY9bAABqwL9rP47uFttAOwu4&s=G96e-UwRzsH0bdWqqFDzDo0eXfV0JU1nxrWOopF65Ms&e=
Subject: Re: Looking for a 3D-scanner

 

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DbzZKWlHzxrw&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=bNMBdl1UKO5z_IwbPhLDY9bAABqwL9rP47uFttAOwu4&s=eGjK5GaPmBV8i5G7USv6zNZwSHOXiyS76BIxJeq4__c&e=




https://urldefense.proofpoint.com/v2/url?u=https-3A__sanchezfilms.wixsite.com_rebel&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=bNMBdl1UKO5z_IwbPhLDY9bAABqwL9rP47uFttAOwu4&s=4bcd0sCxiij6S2y1URicdy-N1oDjKl06Oog5WLztBrQ&e=

 

 

On Thu, Jun 14, 2018 at 3:29 PM, Andy Chlupka (Goehler) 
 wrote:

Have you seen these videos?

 

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DoGwcOrsWSjo&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=bNMBdl1UKO5z_IwbPhLDY9bAABqwL9rP47uFttAOwu4&s=05CRAejfQO22-uIMy6eubI62gEaI8W1tViuN8D9vJQw&e=

 

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DgUuRZdz0hz8&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=bNMBdl1UKO5z_IwbPhLDY9bAABqwL9rP47uFttAOwu4&s=oxtUi02f6jcvuFdUgm59T4iPJ6hVfIjt_I6JOa2fUGw&e=

 

I’ve been following both YouTubers for a long time and I like their content. 
Maybe these videos help you out. 

 

Cheers

 

Andy

 

 

On Jun 14, 2018, at 5:51 PM, Sven Constable  wrote:

 

Hey list,

as I did a lot of product renderings lately, I was thinking about buying a 3D 
scanner to reduce modeling time. Doesn't need to be top notch but should be a 
professional and good scanner so I think in the range of maybe 1 to 2k 
dollars/euros? I checked out a few from low budget (couple hundred bucks, 
disregarded them immediatly) to high budget (several thousands)  and came up 
with this:
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.einscan.com_einscan-2Dse-2Dsp&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=bNMBdl1UKO5z_IwbPhLDY9bAABqwL9rP47uFttAOwu4&s=eZEynO3XECJoT_38nNNuB5ROVNwJss5YDPJFCX2sRJQ&e=

Around 1.500 euros and a point distance of 0.09-0.12mm, what sounds good to me. 
I have no experience with 3D scanning though and maybe you guys have some hints 
or recommendations?

Objects to scan will be no larger than maybe 30x30 cm, in most cases much 
smaller.

 

Thanks and regards.

Sven

  
<https://urldefense.proofpoint.com/v2/url?u=https-3A__u7507473.ct.sendgrid.net_wf_open-3Fupn-3DTu5-2D2BJTCp1P-2D2FbeHmYVbiMY-2D2Fu-2D2FFvGEdLx5Z1LcfzH7zq-2D2BYroh5N5-2D2FEGQCIK0ufV7Zp77MZUn37h1FbRiOHXGmf-2D2BsvQ0CIrOPg1VF8e60aNta1Y7cAu-2D2BYw9nLO5-2D2FR1y9NKBS2OBFAk4Jq6z-2D2BLsk4FFQ6FOPY60XVLXBYuoVJ7MmhwuCObyPeQ32ACPPA5mqLGa85U82Cpiqo0g71EzbHRR8erSGFSfaPsfA5x4fwH8OzNOLGEk5skOHem3KLwuAXMhc&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ52

Re: Looking for a 3D-scanner

2018-06-15 Thread Chris Marshall 
What type of things are you thinking of scanning?


On 14 June 2018 at 22:55, Sven Constable  wrote:

> Thanks Andy for the vids. Nice reviews of the Einscans. I think the SE
> model could be sufficient for my needs.
>
>
>
> Regardings that Cappasity tool: That’s not a 3d scanner, it just creates
> turntable movies.
>
>
>
> *From:* softimage-boun...@listproc.autodesk.com [mailto:softimage-bounces@
> listproc.autodesk.com] *On Behalf Of *F Sanchez
> *Sent:* Thursday, 14 June 2018 22:46
> *To:* Official Softimage Users Mailing List. 
> https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=qdRa150oVX-7c8CERz3luUvs35TfQsZ6IUcfEi421YM&s=qSWNUmr-MyYIzzAJdubQvnVnrdb4wv6OvhAh0J3v14A&e=
> forum/#!forum/xsi_list
> *Subject:* Re: Looking for a 3D-scanner
>
>
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DbzZKWlHzxrw&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=qdRa150oVX-7c8CERz3luUvs35TfQsZ6IUcfEi421YM&s=kC1lcWyvCdg1Al5Qu166JsQ2xuX_V1MdZCllb_ZauqQ&e=
> <https://u7507473.ct.sendgrid.net/wf/click?upn=5SmYwFIJXHmC5X9wAP0G6iB4H67OtDu1LYz6krlc8-2FqBeLCXrELBQVbfMn71cNywwCM9MLKQNt6NvY2bdnUVgiRuzEw0g0OZUwVhB4KIDvkjTtq34l13Jmfjgwg01isCCK511SfOUct9zBCzgDFFRJZc5gVQYIua3LaIK3yOJ5ARHEynyFdM8pj6pe23GpO5dxgzInBdGFbXmuqPzX-2BGR2bEHb-2FZ3BWmy8lWZ6Ev103Q5VMWtmEm316NPlxixz37bqpYfq4axGRsbaZ0OIcBfKcIq3f-2FWkbtoCch94H1b5OuVHInGpZfynhY3rqPpzkG6n5vK68lATAmiO6VESWPJxKYkK35CmFakhC45ez2nGi7l2Py56Y-2F6sbaKJfUA81YrOhW85MO40kiWsOaDd3R63ef3lF-2FWCFjGhi9ZH3Ldgj-2Fc7knv9uUISLgERey9O3AdCbtwnK8EGo4HXmcEXsgSofDqWmuF4kDx-2BkKZ3oLLswYdkRLLYhCNh8hMKyAfjuCmoypcA0dx78MzvlOOE-2BSFAqfCmofnQo6eL7mAMPZ-2FaVUG2S6-2BbWqK0EsAsR67YnbP-2BTqF4-2BLotUqOsFuXzuZJxqUEkB3UMNZCuRevbpT6cRXzt89WSeftXllNengstQj5S-2BvI1rRoFPlut7K-2BvbwAbxokA-2F-2BEaniR7m7zvNmMa-2BYhchgjId7l4kbRqQaENRkX0uEqX9fho3pZpIYxfI8bRCr9JPjspSiDNR5i5EdoCRYkjqvZSK0Rm7MsVeKqR7x6HNwAcnIw-2B7btEhR4XITzhNVFSEYz59vQjZxkkWhaqv52ye4b8fQtyyLZ3i7TqP1VgWRht3XgfxiPJz0Jewm9JCQnL4j4qJ6ii4-2Bx-2Br0Xyby9tEKnS3iPYOMnt0oc-2BGKxcPHrdgX-2BhhSNiZoSZpJh7glzG4FKzLjlo4ZZQLfK1nedVUeuvvl2vIVbk-2BX1s4Qpc3VMouwtulkS-2FMc49flvEIeibiIRTgsOQDawq7G3fI-3D_xehmKS4q8NIxWTEDex9M-2FXPR-2FFr63CJ6w4COI-2BdJC5GUoh7d7Qrhg5l-2F6oa2tslj1TX-2BQIR6qB3UViCvhF0e73QrC1E0NXhnBkJ9XIAEgTYTesH8mTjSYB3zfd27njPQpb0MTD3AJ8WX9-2FH-2FKT40J-2BAHEoyCi8A-2FpsZDOa7zA-2B1puPCk7KIDGQ6QxH40HQv-2BOMOo6YmKwVClUx-2FdTcUcWwPgKmtt4CNxvtVfdm9kuuM-3D>
>
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__sanchezfilms.wixsite.com_rebel&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=qdRa150oVX-7c8CERz3luUvs35TfQsZ6IUcfEi421YM&s=ktd2dGYEssBABqJlEH-0sLgGOc8wQ4fiYseTdbAZO1c&e=
> <https://u7507473.ct.sendgrid.net/wf/click?upn=5SmYwFIJXHmC5X9wAP0G6mg4oLGBuQENbeDkYXezg3m6vjHxJcC6rUMd8QE2MtqzS3nHFJpHH1mihN2vNWVF73yH4QzPTUaj-2BU-2FV4xCvLLTnZ7suFMzmFdGmjVRnYdJAxVY-2F5M380PkfQ8TNK8ovM5rxNeeTCOnkRGaT-2F-2Fqta38pWvWMaql23pwdaAWmes-2Fu-2FwoONKissOPCP2dnxYlCF8MuvS9SagvsIc6CtFXU7v7dMieqREDdkqKDPcfejV-2FTed0NGLk3y506s9BqflPmQjwng7o-2Bq8s51xe-2FXlGjCzPj6ubOSQ-2FvZcAFzabDJGIVWfsg45AzVc7HsnvHnTC46EudS2pvgkbn42xmF4ZSFydPVMCwvSR-2FTDZjy9PeCx8Co1i2QdGQW-2Bxu0KaJJOVTy-2FTet4ovh4tPUOfokCm5UxfoPlqquTOf-2BJkBntJJPX5T9vRtiRhLmv-2FCA0q-2Fft2guAN06nBMPup5fDHw6xqgr-2Fz92NDwg-2Fq7I8Yiw7crtPjQ3ILjGG4JJJYF5P5pfsdK5JkXCMuyU7KEAK1r24FDrKKC78Xs6hr9lOvarqos4ImuhQtZiXv4Mi-2B6MzVaGuFoIlXxcONaoOVhCO4rbcBvQWbKgPiZp31le69KJsK-2B6Yi3ofKMHDwj7U7B457ghWz3v86y7iY2DyVZ2Tczuet2MiSbSx5IAh9sLRuulx-2BKmM2U9FLG7CvbpLtloGysreQI-2FMwB7uTD9Np-2BadTlLCb2qv6dp-2BPPMwdM2Z7syUIJElZjJqI8RshmnbiKdP4XYyvr-2FGdkWYN34sJI1mwDIzx5Mh8sBtbQjj6xQwZz6KURJgzQZYwLSzmVLLhB2nqU8pSt0Fc2WIjlklyw7PyDxHi2oyKYTct38ogBdgDcjW9mdNhWdiNZe8oZcTDGR7vNAlGJ02DfxXiv7-2FRGn-2F043vqZJSQd9WBFVnNT-2BBaHQIXAP2A9aydneB3lB64slXYjvxPE66k9hMnQWY3FfVCHJKFy4bE2jOuT5O5JMtslmfkpHU9MupyX6TXr7Bnj4PLOibbxOwukv8BEQRFcx673jZ5fg5JtlYQc6rGjTNBKfIY53-2FB5EjuNPlHSGGMmAYtFPCwa8ZU0GIzGlBB7sRn8OjNZW1hYQYLCzjFFIDcLOo-2FsDouQKKyFBr9o2KsQj7F5mlyv5K5Kf5NcFLsok2VPkdmMI-2FvL1a3eYY24UhCm6I4ND8tI35-2Fyn3xzn4vqNagJRtslI4epjpuLHJWedH4-2FfXENEwzI57ItSvJzU5tdDP8Lql92sehpbtUqwu1T9gPyqjDHl6MNjR3r8L3AzjRudO0IKhU-3D_xehmKS4q8NIxWTEDex9M-2FXPR-2FFr63CJ6w4COI-2BdJC5GUoh7d7Qrhg5l-2F6oa2tslj1TX-2BQIR6qB3UViCvhF0e72lOxUWMTJtL0Nf1-2FbjObXgDLeBrXI6gWYZyoYrmJUTJy4cnFa-2FgqcINwjNLTiXptcozR-2BPFqoDql2-2FVzHh9taT-2F7UZWhl0Kjp-2BF3QbOOMeWvnhtbwXpcpXu8xHW-2F122-2FO-2FOq1Y5kiPj0OuWC-2FWCEWc-3D>
>
>
>
>
>
> On Thu, Jun 14, 2018 at 3:29 PM, Andy Chlupka (Goehler) <
> lists.andy.goeh...@gmail.com> wrote:
>
> Have you seen these videos?
>
>
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DoGwcOrsWS

RE: Looking for a 3D-scanner

2018-06-14 Thread Sven Constable 
Thanks Andy for the vids. Nice reviews of the Einscans. I think the SE model 
could be sufficient for my needs.

 

Regardings that Cappasity tool: That’s not a 3d scanner, it just creates 
turntable movies.

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of F Sanchez
Sent: Thursday, 14 June 2018 22:46
To: Official Softimage Users Mailing List. 
https://urldefense.proofpoint.com/v2/url?u=https-3A__groups.google.com_forum_-23-21forum_xsi-5Flist&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=ymEJiByD1syYTmzp6p4brAyfBmxOxnMCFn1a-xNfABI&s=DKLwNQeoYRGGUOqWQ9ssAIVytV9He16ZNTKLPCCUpwo&e=
Subject: Re: Looking for a 3D-scanner

 

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DbzZKWlHzxrw&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=ymEJiByD1syYTmzp6p4brAyfBmxOxnMCFn1a-xNfABI&s=ly9nwe_fg0ur3YgQefUTQI3wRjdvfgI1_EiIWQp3GEE&e=




https://urldefense.proofpoint.com/v2/url?u=https-3A__sanchezfilms.wixsite.com_rebel&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=ymEJiByD1syYTmzp6p4brAyfBmxOxnMCFn1a-xNfABI&s=lZ2DQNI3culE-r1R09j89RJRqGYCjdP5LBvSU8shKj8&e=

 

 

On Thu, Jun 14, 2018 at 3:29 PM, Andy Chlupka (Goehler) 
 wrote:

Have you seen these videos?

 

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DoGwcOrsWSjo&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=ymEJiByD1syYTmzp6p4brAyfBmxOxnMCFn1a-xNfABI&s=IvruGupQI-JnLMX8pAIhr1qkJCItTaABd2IuKrLr81A&e=

 

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DgUuRZdz0hz8&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=ymEJiByD1syYTmzp6p4brAyfBmxOxnMCFn1a-xNfABI&s=mxzVku4yq47e4bz_Z2WmzaXiYc7yU9UPA_Na8DgayA8&e=

 

I’ve been following both YouTubers for a long time and I like their content. 
Maybe these videos help you out. 

 

Cheers

 

Andy

 

 

On Jun 14, 2018, at 5:51 PM, Sven Constable  wrote:

 

Hey list,

as I did a lot of product renderings lately, I was thinking about buying a 3D 
scanner to reduce modeling time. Doesn't need to be top notch but should be a 
professional and good scanner so I think in the range of maybe 1 to 2k 
dollars/euros? I checked out a few from low budget (couple hundred bucks, 
disregarded them immediatly) to high budget (several thousands)  and came up 
with this:
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.einscan.com_einscan-2Dse-2Dsp&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=ymEJiByD1syYTmzp6p4brAyfBmxOxnMCFn1a-xNfABI&s=sCRTYix_iXlLH-0NeBWmEsZ-54XWXhYOByT6q3asEIY&e=

Around 1.500 euros and a point distance of 0.09-0.12mm, what sounds good to me. 
I have no experience with 3D scanning though and maybe you guys have some hints 
or recommendations?

Objects to scan will be no larger than maybe 30x30 cm, in most cases much 
smaller.

 

Thanks and regards.

Sven

  
<https://urldefense.proofpoint.com/v2/url?u=https-3A__u7507473.ct.sendgrid.net_wf_open-3Fupn-3DTu5-2D2BJTCp1P-2D2FbeHmYVbiMY-2D2Fu-2D2FFvGEdLx5Z1LcfzH7zq-2D2BYroh5N5-2D2FEGQCIK0ufV7Zp77MZUn37h1FbRiOHXGmf-2D2BsvQ0CIrOPg1VF8e60aNta1Y7cAu-2D2BYw9nLO5-2D2FR1y9NKBS2OBFAk4Jq6z-2D2BLsk4FFQ6FOPY60XVLXBYuoVJ7MmhwuCObyPeQ32ACPPA5mqLGa85U82Cpiqo0g71EzbHRR8erSGFSfaPsfA5x4fwH8OzNOLGEk5skOHem3KLwuAXMhc&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=ymEJiByD1syYTmzp6p4brAyfBmxOxnMCFn1a-xNfABI&s=kLC9xexVNh7Vn0CkkTjtCvfxnvmRuhk659NncPfaSgY&e=>
 

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

 

  
<https://urldefense.proofpoint.com/v2/url?u=https-3A__u7507473.ct.sendgrid.net_wf_open-3Fupn-3D-2D2F-2D2FK9V641z8DnI0EEHyUKJ-2D2Fr9YYudHLiRhSsEXkNr9SIR3juSgqeL7ap7k-2D2BtAJDy6SmfRmJipfT0fM95GQhx7nNVyUvDZlX3q3vqbRRjC6ExXreU-2D2FhCW02byTE9n17lBYhExLiGAtnxObJF-2D2FLusMeUAkdYro-2D2Fu0oXphv9UmwtR0mdjH6QcKTBHIEsSPwrddRF9fmjQScajDV9cnxAIvDxvC1fbgoyOQQf6nMfSxvSJlk-2D3D&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=ymEJiByD1syYTmzp6p4brAyfBmxOxnMCFn1a-xNfABI&s=X1GibtTvClkfbIh_gnSssC0V1F6Wlv3Bg72DWzH1-AY&e=>
 


--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

 

  
<https://urldefense.proofpoint.com/v2/url?u=https-3A__u7507473.ct.

Re: Looking for a 3D-scanner

2018-06-14 Thread F Sanchez 
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DbzZKWlHzxrw&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=l4bsR6WwsVlaOTkRaa5DohACRFaDD_mmzwb0oqAzC4c&s=Rz3KED63DZAg1UOtYD37a2vgzydCpZB8RifwuLRoGTM&e=

https://urldefense.proofpoint.com/v2/url?u=https-3A__sanchezfilms.wixsite.com_rebel&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=l4bsR6WwsVlaOTkRaa5DohACRFaDD_mmzwb0oqAzC4c&s=osIOlWJzPHSUxtCtXqwldrOsyxW5woTb8FatJW8Aq8s&e=
 



On Thu, Jun 14, 2018 at 3:29 PM, Andy Chlupka (Goehler) <
lists.andy.goeh...@gmail.com> wrote:

> Have you seen these videos?
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DoGwcOrsWSjo&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=l4bsR6WwsVlaOTkRaa5DohACRFaDD_mmzwb0oqAzC4c&s=dMvF_Ij5zx14PwpArzYL2-Y-Qe2mQWnGCZbO0Wl9OyI&e=
> 
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DgUuRZdz0hz8&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=l4bsR6WwsVlaOTkRaa5DohACRFaDD_mmzwb0oqAzC4c&s=uK7MT5WMpJUxPj6kE9cfj0BP-_1enmBX54mH029HUJQ&e=
> 
>
> I’ve been following both YouTubers for a long time and I like their
> content. Maybe these videos help you out.
>
> Cheers
>
> Andy
>
>
> On Jun 14, 2018, at 5:51 PM, Sven Constable 
> wrote:
>
> Hey list,
> as I did a lot of product renderings lately, I was thinking about buying
> a 3D scanner to reduce modeling time. Doesn't need to be top notch but
> should be a professional and good scanner so I think in the range of maybe
> 1 to 2k dollars/euros? I checked out a few from low budget (couple hundred
> bucks, disregarded them immediatly) to high budget (several thousands)
> and came up with this:
> *https://urldefense.proofpoint.com/v2/url?u=https-3A__www.einscan.com_einscan-2Dse-2Dsp-2A&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=l4bsR6WwsVlaOTkRaa5DohACRFaDD_mmzwb0oqAzC4c&s=LUDQUQVO-ptzawiZxVtxU37DjkXYhAChCAP-BZUQuYM&e=
>

Re: Looking for a 3D-scanner

2018-06-14 Thread Andy Chlupka (Goehler) 
Have you seen these videos?

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DoGwcOrsWSjo&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=N6nQKs762uiDuQdANV8X6AE0yESE9CyDwz5KTfsdftU&s=b-K8yIjgh0iJOGYVQDdMS4N_lL3Rcdp8Tb_iYklAQQs&e=
 


https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-3Fv-3DgUuRZdz0hz8&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=N6nQKs762uiDuQdANV8X6AE0yESE9CyDwz5KTfsdftU&s=4a4KZaoDExp8Gal7Y3fAjZFyWE_N6lW4dqp_glAbGzU&e=
 


I’ve been following both YouTubers for a long time and I like their content. 
Maybe these videos help you out. 

Cheers

Andy


> On Jun 14, 2018, at 5:51 PM, Sven Constable  wrote:
> 
> Hey list,
> as I did a lot of product renderings lately, I was thinking about buying a 3D 
> scanner to reduce modeling time. Doesn't need to be top notch but should be a 
> professional and good scanner so I think in the range of maybe 1 to 2k 
> dollars/euros? I checked out a few from low budget (couple hundred bucks, 
> disregarded them immediatly) to high budget (several thousands)  and came up 
> with this:
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.einscan.com_einscan-2Dse-2Dsp&d=DwIFaQ&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=N6nQKs762uiDuQdANV8X6AE0yESE9CyDwz5KTfsdftU&s=gx99HEIP25_skM4EqTIN5x-nsvL2WYHJFGMi6p5CYPw&e=
>  
> 
> Around 1.500 euros and a point distance of 0.09-0.12mm, what sounds good to 
> me. I have no experience with 3D scanning though and maybe you guys have some 
> hints or recommendations?
> Objects to scan will be no larger than maybe 30x30 cm, in most cases much 
> smaller.
> 
> Thanks and regards.
> Sven
> 
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
> "unsubscribe" in the subject, and reply to confirm.

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Looking for a 3D-scanner

2018-06-14 Thread Sven Constable 
Hey list,

as I did a lot of product renderings lately, I was thinking about buying a
3D scanner to reduce modeling time. Doesn't need to be top notch but should
be a professional and good scanner so I think in the range of maybe 1 to 2k
dollars/euros? I checked out a few from low budget (couple hundred bucks,
disregarded them immediatly) to high budget (several thousands)  and came up
with this:
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.einscan.com_einscan-2Dse-2Dsp&d=DwICAg&c=76Q6Tcqc-t2x0ciWn7KFdCiqt6IQ7a_IF9uzNzd_2pA&r=GmX_32eCLYPFLJ529RohsPjjNVwo9P0jVMsrMw7PFsA&m=FhtgfnTxY6habA9BZOlodEMz_UYcYKTBhRl5Rd3qHIs&s=tyCs68rw-ZNmVgDVHEP5kB6NC-agKthP2crPSXItuF8&e=

Around 1.500 euros and a point distance of 0.09-0.12mm, what sounds good to
me. I have no experience with 3D scanning though and maybe you guys have
some hints or recommendations?
Objects to scan will be no larger than maybe 30x30 cm, in most cases much
smaller.

Thanks and regards.
Sven
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.