Re: Steps for building solr/lucene code and starting server
Thanks Erick I ended up including my files in solr/webapp/build.xml under "dist" target (which is also called by "server" target in solr folder). I used fileset instead of lib not sure about the pros and cons. Now I am able to run my server using 'bin/solr' with my custom config files. On Fri, Jun 2, 2017 at 8:08 PM, Erick Ericksonwrote: > You can just put a directive in your solrconfig.xml file > that points to the jar in analysis-extras. > > I generally prefer that to copying things around on the theory that > it's one less thing to forget to copy sometime later... > > Best, > Erick > > On Fri, Jun 2, 2017 at 5:05 PM, Nawab Zada Asad Iqbal > wrote: > > When I do 'ant server', the libs from "./build/lucene-libs/" are copied > > over to "./server/solr-webapp/webapp/WEB-INF/lib/" . However, my > required > > class is in a lib which is on: > > "./build/contrib/solr-analysis-extras/lucene-libs/" > > > > I guess, I need to do the contrib target? > > > > > > On Fri, Jun 2, 2017 at 4:20 PM, Nawab Zada Asad Iqbal > > wrote: > > > >> Hi Erick > >> > >> "bin/solr start -e techproducts" works fine. It is probably because it > is > >> not referring to 'org.apache.lucene.analysis.ic > >> u.ICUNormalizer2CharFilterFactory' in the schema.xml ? > >> > >> I am not sure what should I try. I am wondering if there is some > document > >> about solr dev setup. > >> > >> > >> On Fri, Jun 2, 2017 at 8:29 AM, Erick Erickson > > >> wrote: > >> > >>> "ant server" should be sufficient. "dist" is useful for when > >>> you have custom _external_ programs (say SolrJ) that you > >>> want all the libraries collected in the same place. There's > >>> no need to "ant compile" as the "server" target > >>> > >>> I assume what you're seeing is a ClassNotFound error, right? > >>> I'm a bit puzzled since that filter isn't a contrib, so it should > >>> be found. > >>> > >>> What I'd do is just do the build first then start the example, > >>> "bin/solr start -e techproducts" > >>> Don't specify solrhome or anything else. Once that works, > >>> build up from there. > >>> > >>> Best, > >>> Erick > >>> > >>> On Fri, Jun 2, 2017 at 3:15 AM, Nawab Zada Asad Iqbal < > khi...@gmail.com> > >>> wrote: > >>> > Hi, > >>> > > >>> > I have synced lucene-solr repo because I (will) have some custom > code in > >>> > lucene and solr folders. What are the steps for starting solr > server? My > >>> > schema.xml uses ICUNormalizer2CharFilterFactory (which I see in > lucene > >>> > folder tree), but I don't know how to make it work with solr webapp. > I > >>> know > >>> > the (luncene ant > >>> > target) 'compile', (solr targets) 'dist', and 'server', but the > order > >>> is > >>> > not clear to me. > >>> > > >>> > I have compiled lucene before doing 'ant server' in solr folder, but > I > >>> > still see this error when I do 'bin/solr start -f -s ~/solrhome/' :- > >>> > > >>> > Caused by: org.apache.solr.common.SolrException: Plugin init failure > >>> for > >>> > [schema.xml] fieldType "text": Plugin init failure for [schema.xml] > >>> > analyzer/charFilter "nfkc": Error loading class > >>> > 'org.apache.lucene.analysis.icu.ICUNormalizer2CharFilterFactory' > >>> > > >>> > > >>> > > >>> > Thanks > >>> > Nawab > >>> > >> > >> >
Re: Steps for building solr/lucene code and starting server
You can just put a directive in your solrconfig.xml file that points to the jar in analysis-extras. I generally prefer that to copying things around on the theory that it's one less thing to forget to copy sometime later... Best, Erick On Fri, Jun 2, 2017 at 5:05 PM, Nawab Zada Asad Iqbalwrote: > When I do 'ant server', the libs from "./build/lucene-libs/" are copied > over to "./server/solr-webapp/webapp/WEB-INF/lib/" . However, my required > class is in a lib which is on: > "./build/contrib/solr-analysis-extras/lucene-libs/" > > I guess, I need to do the contrib target? > > > On Fri, Jun 2, 2017 at 4:20 PM, Nawab Zada Asad Iqbal > wrote: > >> Hi Erick >> >> "bin/solr start -e techproducts" works fine. It is probably because it is >> not referring to 'org.apache.lucene.analysis.ic >> u.ICUNormalizer2CharFilterFactory' in the schema.xml ? >> >> I am not sure what should I try. I am wondering if there is some document >> about solr dev setup. >> >> >> On Fri, Jun 2, 2017 at 8:29 AM, Erick Erickson >> wrote: >> >>> "ant server" should be sufficient. "dist" is useful for when >>> you have custom _external_ programs (say SolrJ) that you >>> want all the libraries collected in the same place. There's >>> no need to "ant compile" as the "server" target >>> >>> I assume what you're seeing is a ClassNotFound error, right? >>> I'm a bit puzzled since that filter isn't a contrib, so it should >>> be found. >>> >>> What I'd do is just do the build first then start the example, >>> "bin/solr start -e techproducts" >>> Don't specify solrhome or anything else. Once that works, >>> build up from there. >>> >>> Best, >>> Erick >>> >>> On Fri, Jun 2, 2017 at 3:15 AM, Nawab Zada Asad Iqbal >>> wrote: >>> > Hi, >>> > >>> > I have synced lucene-solr repo because I (will) have some custom code in >>> > lucene and solr folders. What are the steps for starting solr server? My >>> > schema.xml uses ICUNormalizer2CharFilterFactory (which I see in lucene >>> > folder tree), but I don't know how to make it work with solr webapp. I >>> know >>> > the (luncene ant >>> > target) 'compile', (solr targets) 'dist', and 'server', but the order >>> is >>> > not clear to me. >>> > >>> > I have compiled lucene before doing 'ant server' in solr folder, but I >>> > still see this error when I do 'bin/solr start -f -s ~/solrhome/' :- >>> > >>> > Caused by: org.apache.solr.common.SolrException: Plugin init failure >>> for >>> > [schema.xml] fieldType "text": Plugin init failure for [schema.xml] >>> > analyzer/charFilter "nfkc": Error loading class >>> > 'org.apache.lucene.analysis.icu.ICUNormalizer2CharFilterFactory' >>> > >>> > >>> > >>> > Thanks >>> > Nawab >>> >> >>
Re: Steps for building solr/lucene code and starting server
When I do 'ant server', the libs from "./build/lucene-libs/" are copied over to "./server/solr-webapp/webapp/WEB-INF/lib/" . However, my required class is in a lib which is on: "./build/contrib/solr-analysis-extras/lucene-libs/" I guess, I need to do the contrib target? On Fri, Jun 2, 2017 at 4:20 PM, Nawab Zada Asad Iqbalwrote: > Hi Erick > > "bin/solr start -e techproducts" works fine. It is probably because it is > not referring to 'org.apache.lucene.analysis.ic > u.ICUNormalizer2CharFilterFactory' in the schema.xml ? > > I am not sure what should I try. I am wondering if there is some document > about solr dev setup. > > > On Fri, Jun 2, 2017 at 8:29 AM, Erick Erickson > wrote: > >> "ant server" should be sufficient. "dist" is useful for when >> you have custom _external_ programs (say SolrJ) that you >> want all the libraries collected in the same place. There's >> no need to "ant compile" as the "server" target >> >> I assume what you're seeing is a ClassNotFound error, right? >> I'm a bit puzzled since that filter isn't a contrib, so it should >> be found. >> >> What I'd do is just do the build first then start the example, >> "bin/solr start -e techproducts" >> Don't specify solrhome or anything else. Once that works, >> build up from there. >> >> Best, >> Erick >> >> On Fri, Jun 2, 2017 at 3:15 AM, Nawab Zada Asad Iqbal >> wrote: >> > Hi, >> > >> > I have synced lucene-solr repo because I (will) have some custom code in >> > lucene and solr folders. What are the steps for starting solr server? My >> > schema.xml uses ICUNormalizer2CharFilterFactory (which I see in lucene >> > folder tree), but I don't know how to make it work with solr webapp. I >> know >> > the (luncene ant >> > target) 'compile', (solr targets) 'dist', and 'server', but the order >> is >> > not clear to me. >> > >> > I have compiled lucene before doing 'ant server' in solr folder, but I >> > still see this error when I do 'bin/solr start -f -s ~/solrhome/' :- >> > >> > Caused by: org.apache.solr.common.SolrException: Plugin init failure >> for >> > [schema.xml] fieldType "text": Plugin init failure for [schema.xml] >> > analyzer/charFilter "nfkc": Error loading class >> > 'org.apache.lucene.analysis.icu.ICUNormalizer2CharFilterFactory' >> > >> > >> > >> > Thanks >> > Nawab >> > >
Re: Steps for building solr/lucene code and starting server
Hi Erick "bin/solr start -e techproducts" works fine. It is probably because it is not referring to 'org.apache.lucene.analysis.ic u.ICUNormalizer2CharFilterFactory' in the schema.xml ? I am not sure what should I try. I am wondering if there is some document about solr dev setup. On Fri, Jun 2, 2017 at 8:29 AM, Erick Ericksonwrote: > "ant server" should be sufficient. "dist" is useful for when > you have custom _external_ programs (say SolrJ) that you > want all the libraries collected in the same place. There's > no need to "ant compile" as the "server" target > > I assume what you're seeing is a ClassNotFound error, right? > I'm a bit puzzled since that filter isn't a contrib, so it should > be found. > > What I'd do is just do the build first then start the example, > "bin/solr start -e techproducts" > Don't specify solrhome or anything else. Once that works, > build up from there. > > Best, > Erick > > On Fri, Jun 2, 2017 at 3:15 AM, Nawab Zada Asad Iqbal > wrote: > > Hi, > > > > I have synced lucene-solr repo because I (will) have some custom code in > > lucene and solr folders. What are the steps for starting solr server? My > > schema.xml uses ICUNormalizer2CharFilterFactory (which I see in lucene > > folder tree), but I don't know how to make it work with solr webapp. I > know > > the (luncene ant > > target) 'compile', (solr targets) 'dist', and 'server', but the order is > > not clear to me. > > > > I have compiled lucene before doing 'ant server' in solr folder, but I > > still see this error when I do 'bin/solr start -f -s ~/solrhome/' :- > > > > Caused by: org.apache.solr.common.SolrException: Plugin init failure for > > [schema.xml] fieldType "text": Plugin init failure for [schema.xml] > > analyzer/charFilter "nfkc": Error loading class > > 'org.apache.lucene.analysis.icu.ICUNormalizer2CharFilterFactory' > > > > > > > > Thanks > > Nawab >
Re: Steps for building solr/lucene code and starting server
"ant server" should be sufficient. "dist" is useful for when you have custom _external_ programs (say SolrJ) that you want all the libraries collected in the same place. There's no need to "ant compile" as the "server" target I assume what you're seeing is a ClassNotFound error, right? I'm a bit puzzled since that filter isn't a contrib, so it should be found. What I'd do is just do the build first then start the example, "bin/solr start -e techproducts" Don't specify solrhome or anything else. Once that works, build up from there. Best, Erick On Fri, Jun 2, 2017 at 3:15 AM, Nawab Zada Asad Iqbalwrote: > Hi, > > I have synced lucene-solr repo because I (will) have some custom code in > lucene and solr folders. What are the steps for starting solr server? My > schema.xml uses ICUNormalizer2CharFilterFactory (which I see in lucene > folder tree), but I don't know how to make it work with solr webapp. I know > the (luncene ant > target) 'compile', (solr targets) 'dist', and 'server', but the order is > not clear to me. > > I have compiled lucene before doing 'ant server' in solr folder, but I > still see this error when I do 'bin/solr start -f -s ~/solrhome/' :- > > Caused by: org.apache.solr.common.SolrException: Plugin init failure for > [schema.xml] fieldType "text": Plugin init failure for [schema.xml] > analyzer/charFilter "nfkc": Error loading class > 'org.apache.lucene.analysis.icu.ICUNormalizer2CharFilterFactory' > > > > Thanks > Nawab
Steps for building solr/lucene code and starting server
Hi, I have synced lucene-solr repo because I (will) have some custom code in lucene and solr folders. What are the steps for starting solr server? My schema.xml uses ICUNormalizer2CharFilterFactory (which I see in lucene folder tree), but I don't know how to make it work with solr webapp. I know the (luncene ant target) 'compile', (solr targets) 'dist', and 'server', but the order is not clear to me. I have compiled lucene before doing 'ant server' in solr folder, but I still see this error when I do 'bin/solr start -f -s ~/solrhome/' :- Caused by: org.apache.solr.common.SolrException: Plugin init failure for [schema.xml] fieldType "text": Plugin init failure for [schema.xml] analyzer/charFilter "nfkc": Error loading class 'org.apache.lucene.analysis.icu.ICUNormalizer2CharFilterFactory' Thanks Nawab