Re: [Spacewalk-list] help with ubuntu16 client and spacewalk2.9 server
Hi Robert,
Here are the pertinent lines for "apt-get --simulate upgrade".
root@beaker:/etc/apt/sources.list.d# apt-get --simulate upgrade python-wadllib
Reading package lists... Done Building dependency tree Reading state
information... Done Calculating upgrade... Done The following package was
automatically installed and is no longer required:
libsigsegv2
Use 'apt autoremove' to remove it.
The following packages have been kept back:
libdrm2 libparse-debianchangelog-perl libpython-stdlib linux-image-virtual
lsb-release open-vm-tools python python-minimal python3 ubuntu-minimal The
following packages will be upgraded:
...
python-wadllib python2.7 python2.7-minimal python3-apparmor python3-apport ...
Inst python-wadllib [1.3.2-3] (1.3.2-3ubuntu0.16.04.1
Ubuntu:16.04/ubuntu16-xenial-updates [all]) ...
Conf python-wadllib (1.3.2-3ubuntu0.16.04.1
Ubuntu:16.04/ubuntu16-xenial-updates [all])
I have everything commented out of /etc/apt/sources.list so it is getting the
packages from /etc/apt/sources.list.d/spacewalk.list.
I'm not sure if this is helpful or not, but " apt list --upgradable|wc" is 496,
but in spacewalk, Systems - Software - Packages - Upgrade shows 247.
Thanks!
Nicole
-Original Message-
From: spacewalk-list-boun...@redhat.com On
Behalf Of Robert Paschedag
Sent: Tuesday, August 27, 2019 2:43 PM
To: spacewalk-list@redhat.com
Subject: Re: [Spacewalk-list] help with ubuntu16 client and spacewalk2.9 server
Can you check from the client with "apt-get", if the package "python-wadllib"
is really an upgrade candidate?
Might be an error, that spacewalk "thinks" it is an update for the server but
it isn't.
Robert
sent from my mobile device
Originale Nachricht
Von: Nicole Beck
Gesendet: Tue Aug 27 19:13:51 GMT+02:00 2019
An: "'spacewalk-list@redhat.com'"
Betreff: [Spacewalk-list] help with ubuntu16 client and spacewalk2.9 server
Hello,
I'm trying to get an Ubuntu 16 xenial client setup to do updates from a
spacewalk 2.9 server installed on CentOS7. I am able to register the client,
install and remove, or update a single package thru the spacewalk web
interface. But when I try to update all of the packages on (choose system -
Software - Packages tab - Upgrade tab - choose Select All - Upgrade packages -
confirm), then run "rhn_check -vvv" on the client, it fails with:
...
Apt-Spacewalk: Updating sources.list
D: Failed to update package['python-wadllib', '1.3.2', '3ubuntu0.16.04.1', '',
'all-deb']
D: Sending back response(1, 'update failed', {})
D: do_call packages.checkNeedUpdate('rhnsd=1',){}
D: Called refresh_list
Updating package profile
D: rpcServer: Calling XMLRPC registration.welcome_message
D: rpcServer: Calling XMLRPC registration.update_packages
D: local action status: (0, 'package list refreshed', {})
D: rpcServer: Calling XMLRPC registration.welcome_message
I could use the web interface to update the single package that it says it is
failing on.
I used the steps listed in
https://www.redhat.com/archives/spacewalk-list/2019-January/msg6.html to
get this setup. I installed the 2.8 spacewalk client referenced in the thread,
and I signed the repos per the documentation at
http://www.devops-blog.net/spacewalk/gpg-signing-apt-repository-in-spacewalk. I
checked, and I think the necessary patches referenced in that document are
already the client and server. I used spacewalks spacewalk-repo-sync command to
sync the Ubuntu repositories. However, I did not run the script to setup
multiarch headers that is referenced in
https://www.redhat.com/archives/spacewalk-list/2018-September/msg00072.html. Is
that still needed? The documentation for Ubuntu and spacewalk isn't that great,
some is for older versions of spacewalk, so I'm piecing things together and I'm
not sure what is still needed and what is not, of if I installed things
correctly.
Any suggestions are appreciated.
Thanks!
Nicole
___
Spacewalk-list mailing list
Spacewalk-list@redhat.com
https://www.redhat.com/mailman/listinfo/spacewalk-list
___
Spacewalk-list mailing list
Spacewalk-list@redhat.com
https://www.redhat.com/mailman/listinfo/spacewalk-list
___
Spacewalk-list mailing list
Spacewalk-list@redhat.com
https://www.redhat.com/mailman/listinfo/spacewalk-list
___
Spacewalk-list mailing list
Spacewalk-list@redhat.com
https://www.redhat.com/mailman/listinfo/spacewalk-list
Re: [Spacewalk-list] help with ubuntu16 client and spacewalk2.9 server
Hi Robert,
Here are the pertinent lines for "apt-get --simulate upgrade".
root@beaker:/etc/apt/sources.list.d# apt-get --simulate upgrade python-wadllib
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following package was automatically installed and is no longer required:
libsigsegv2
Use 'apt autoremove' to remove it.
The following packages have been kept back:
libdrm2 libparse-debianchangelog-perl libpython-stdlib linux-image-virtual
lsb-release open-vm-tools python python-minimal python3 ubuntu-minimal
The following packages will be upgraded:
...
python-wadllib python2.7 python2.7-minimal python3-apparmor python3-apport
...
Inst python-wadllib [1.3.2-3] (1.3.2-3ubuntu0.16.04.1
Ubuntu:16.04/ubuntu16-xenial-updates [all])
...
Conf python-wadllib (1.3.2-3ubuntu0.16.04.1
Ubuntu:16.04/ubuntu16-xenial-updates [all])
I have everything commented out of /etc/apt/sources.list so it is getting the
packages from /etc/apt/sources.list.d/spacewalk.list.
I'm not sure if this is helpful or not, but " apt list --upgradable|wc" is 496,
but in spacewalk, Systems - Software - Packages - Upgrade shows 247.
Thanks!
Nicole
-Original Message-
From: spacewalk-list-boun...@redhat.com On
Behalf Of Robert Paschedag
Sent: Tuesday, August 27, 2019 2:43 PM
To: spacewalk-list@redhat.com
Subject: Re: [Spacewalk-list] help with ubuntu16 client and spacewalk2.9 server
Can you check from the client with "apt-get", if the package "python-wadllib"
is really an upgrade candidate?
Might be an error, that spacewalk "thinks" it is an update for the server but
it isn't.
Robert
sent from my mobile device
Originale Nachricht
Von: Nicole Beck
Gesendet: Tue Aug 27 19:13:51 GMT+02:00 2019
An: "'spacewalk-list@redhat.com'"
Betreff: [Spacewalk-list] help with ubuntu16 client and spacewalk2.9 server
Hello,
I'm trying to get an Ubuntu 16 xenial client setup to do updates from a
spacewalk 2.9 server installed on CentOS7. I am able to register the client,
install and remove, or update a single package thru the spacewalk web
interface. But when I try to update all of the packages on (choose system -
Software - Packages tab - Upgrade tab - choose Select All - Upgrade packages -
confirm), then run "rhn_check -vvv" on the client, it fails with:
...
Apt-Spacewalk: Updating sources.list
D: Failed to update package['python-wadllib', '1.3.2', '3ubuntu0.16.04.1', '',
'all-deb']
D: Sending back response(1, 'update failed', {})
D: do_call packages.checkNeedUpdate('rhnsd=1',){}
D: Called refresh_list
Updating package profile
D: rpcServer: Calling XMLRPC registration.welcome_message
D: rpcServer: Calling XMLRPC registration.update_packages
D: local action status: (0, 'package list refreshed', {})
D: rpcServer: Calling XMLRPC registration.welcome_message
I could use the web interface to update the single package that it says it is
failing on.
I used the steps listed in
https://www.redhat.com/archives/spacewalk-list/2019-January/msg6.html to
get this setup. I installed the 2.8 spacewalk client referenced in the thread,
and I signed the repos per the documentation at
http://www.devops-blog.net/spacewalk/gpg-signing-apt-repository-in-spacewalk. I
checked, and I think the necessary patches referenced in that document are
already the client and server. I used spacewalks spacewalk-repo-sync command to
sync the Ubuntu repositories. However, I did not run the script to setup
multiarch headers that is referenced in
https://www.redhat.com/archives/spacewalk-list/2018-September/msg00072.html. Is
that still needed? The documentation for Ubuntu and spacewalk isn't that great,
some is for older versions of spacewalk, so I'm piecing things together and I'm
not sure what is still needed and what is not, of if I installed things
correctly.
Any suggestions are appreciated.
Thanks!
Nicole
___
Spacewalk-list mailing list
Spacewalk-list@redhat.com
https://www.redhat.com/mailman/listinfo/spacewalk-list
___
Spacewalk-list mailing list
Spacewalk-list@redhat.com
https://www.redhat.com/mailman/listinfo/spacewalk-list
___
Spacewalk-list mailing list
Spacewalk-list@redhat.com
https://www.redhat.com/mailman/listinfo/spacewalk-list
Re: [Spacewalk-list] help with ubuntu16 client and spacewalk2.9 server
Can you check from the client with "apt-get", if the package "python-wadllib"
is really an upgrade candidate?
Might be an error, that spacewalk "thinks" it is an update for the server but
it isn't.
Robert
sent from my mobile device
Originale Nachricht
Von: Nicole Beck
Gesendet: Tue Aug 27 19:13:51 GMT+02:00 2019
An: "'spacewalk-list@redhat.com'"
Betreff: [Spacewalk-list] help with ubuntu16 client and spacewalk2.9 server
Hello,
I'm trying to get an Ubuntu 16 xenial client setup to do updates from a
spacewalk 2.9 server installed on CentOS7. I am able to register the client,
install and remove, or update a single package thru the spacewalk web
interface. But when I try to update all of the packages on (choose system -
Software - Packages tab - Upgrade tab - choose Select All - Upgrade packages -
confirm), then run "rhn_check -vvv" on the client, it fails with:
...
Apt-Spacewalk: Updating sources.list
D: Failed to update package['python-wadllib', '1.3.2', '3ubuntu0.16.04.1', '',
'all-deb']
D: Sending back response(1, 'update failed', {})
D: do_call packages.checkNeedUpdate('rhnsd=1',){}
D: Called refresh_list
Updating package profile
D: rpcServer: Calling XMLRPC registration.welcome_message
D: rpcServer: Calling XMLRPC registration.update_packages
D: local action status: (0, 'package list refreshed', {})
D: rpcServer: Calling XMLRPC registration.welcome_message
I could use the web interface to update the single package that it says it is
failing on.
I used the steps listed in
https://www.redhat.com/archives/spacewalk-list/2019-January/msg6.html to
get this setup. I installed the 2.8 spacewalk client referenced in the thread,
and I signed the repos per the documentation at
http://www.devops-blog.net/spacewalk/gpg-signing-apt-repository-in-spacewalk. I
checked, and I think the necessary patches referenced in that document are
already the client and server. I used spacewalks spacewalk-repo-sync command to
sync the Ubuntu repositories. However, I did not run the script to setup
multiarch headers that is referenced in
https://www.redhat.com/archives/spacewalk-list/2018-September/msg00072.html. Is
that still needed? The documentation for Ubuntu and spacewalk isn't that great,
some is for older versions of spacewalk, so I'm piecing things together and I'm
not sure what is still needed and what is not, of if I installed things
correctly.
Any suggestions are appreciated.
Thanks!
Nicole
___
Spacewalk-list mailing list
Spacewalk-list@redhat.com
https://www.redhat.com/mailman/listinfo/spacewalk-list
___
Spacewalk-list mailing list
Spacewalk-list@redhat.com
https://www.redhat.com/mailman/listinfo/spacewalk-list
[Spacewalk-list] help with ubuntu16 client and spacewalk2.9 server
Hello,
I'm trying to get an Ubuntu 16 xenial client setup to do updates from a
spacewalk 2.9 server installed on CentOS7. I am able to register the client,
install and remove, or update a single package thru the spacewalk web
interface. But when I try to update all of the packages on (choose system -
Software - Packages tab - Upgrade tab - choose Select All - Upgrade packages -
confirm), then run "rhn_check -vvv" on the client, it fails with:
...
Apt-Spacewalk: Updating sources.list
D: Failed to update package['python-wadllib', '1.3.2', '3ubuntu0.16.04.1', '',
'all-deb']
D: Sending back response(1, 'update failed', {})
D: do_call packages.checkNeedUpdate('rhnsd=1',){}
D: Called refresh_list
Updating package profile
D: rpcServer: Calling XMLRPC registration.welcome_message
D: rpcServer: Calling XMLRPC registration.update_packages
D: local action status: (0, 'package list refreshed', {})
D: rpcServer: Calling XMLRPC registration.welcome_message
I could use the web interface to update the single package that it says it is
failing on.
I used the steps listed in
https://www.redhat.com/archives/spacewalk-list/2019-January/msg6.html to
get this setup. I installed the 2.8 spacewalk client referenced in the thread,
and I signed the repos per the documentation at
http://www.devops-blog.net/spacewalk/gpg-signing-apt-repository-in-spacewalk. I
checked, and I think the necessary patches referenced in that document are
already the client and server. I used spacewalks spacewalk-repo-sync command to
sync the Ubuntu repositories. However, I did not run the script to setup
multiarch headers that is referenced in
https://www.redhat.com/archives/spacewalk-list/2018-September/msg00072.html. Is
that still needed? The documentation for Ubuntu and spacewalk isn't that great,
some is for older versions of spacewalk, so I'm piecing things together and I'm
not sure what is still needed and what is not, of if I installed things
correctly.
Any suggestions are appreciated.
Thanks!
Nicole
___
Spacewalk-list mailing list
Spacewalk-list@redhat.com
https://www.redhat.com/mailman/listinfo/spacewalk-list
