Re: [SR-Users] Dialog Module Hash Size vs Number of Dialogs
Hi Daniel, Thanks for your responses. This discussion has been very useful. Our code is along the lines that you suggest in which we are using some database ops prior to the dialog calls to gather if the user is call limited and if so, the provisioned users "max calls allowed" per billing party. Then, we check their current active profile size: get_profile_size("prepaid", "$avp(s:billing_party)", "$avp(profile_size)"); If they have available calls, we are using a dialog profile called "prepaid" with a limit set per user (aka billing_party): set_dlg_profile("prepaid", "$avp(s:billing_party)"); So, it sounds like from what you describe, I will set my hash size to be a few times larger than my forecasted profile size to keep matching operations to a minimal. And since dialogs timeout anyway if they are not cleared by a proper BYE, a memory leak of uncleared dialogs is highly unlikely. Thank you for your assistance. Hopefully we will meet again soon, and I can share how the solution turns out. Mark Blackford Digium Cloud Services On Mon, Dec 4, 2017 at 2:56 PM, Daniel-Constantin Mierla wrote: > The hash_size has no relevance on how many dialogs can be handled. It is > only related to the lookup performance. So even with hash_size=1 you can > have same number of dialogs as with hash_size=4096 or higher. > > The difference is that with hash_size=1, all the dialogs are in a single > linked list, so if you have 2000 active dialog, you may have the worse case > that it requires 2000 matching operations to lookup a specific dialog. > > If the hash_size is 2048, the at 2000 active calls and a fair > distribution, then looking up a specific dialog will be done in a single > matching operation. Fair distribution cannot be ensure, but it is quite > good, so typically the difference between the list loaded slot and most > loaded slot is not that high. I expect that worse case situation won't > require more that 5 matching operations on a hash table with 2048 slots > when having 2000 active calls. > To put limit on active calls, the simplest solution is to do a test on > $stat(active_dialogs)>=limit then reject the initial invite: > > - https://www.kamailio.org/docs/modules/stable/modules/dialog. > html#idp34022668 > > You may need statistics module to get the $stat(...) var: > > - https://www.kamailio.org/docs/modules/stable/modules/statistics.html > > The alternative would be to set all active calls in a single dialog > profile. > > - https://www.kamailio.org/docs/modules/stable/modules/dialog. > html#dialog.f.set_dlg_profile > > Then get the size of the profile and test it against the limit. > > This is more suitable if you want to set limits per user, a.s.o., because > you can group on profiles with a specific key (e.g., username). > > Cheers, > Daniel > > > On 04.12.17 19:28, Mark Blackford wrote: > > Thank you for your response! > > I am currently replacing the call_control module used with CDRTool Prepaid > with the dialog module using hash tables. The speed and stability are > tremendously better! > > My concern is two-fold: > 1) I do not want calls to be blocked because I set the hash table size too > small. > 2) I do not want any memory usage problems that could cause kamailio > stability issues. > > My understanding, or at least how I want to use the "hash_size" modparam, > is that hash_size gives dialog a set memory space (aka slots and buckets) > to store the dialogs being tracked. This is great since I "think" I will > have constant memory consumption that will be a fixed amount and never > "grow". However, I wanted to get a rough idea of how many dialogs > (customer calls) I could track per kamailio instance to properly choose the > hash size. > > I thought it would be easy to set the value to something very small in the > lab and just run up the number of calls until kamailio hits an upper limit > and fails to create any more dialogs. > modparam("dialog", "hash_size", 32) > > However, I am able to create almost 2000 dialogs no matter what size I > choose. After, reading the information in the link about hash tables and > your response, I see how a larger table with more "hashing" increases > lookup performance, but I still do not see how the total number of dialogs > that the module tracks can be set so that the kamailio memory usage is > protected. I still look at the hash_size as the key here and that there > should be a relationship, perhaps rough at best, to the maximum number of > dialogs supported in the table. > > Thanks so much for your time, > Mark Blackord > Digium Cloud Services > > On Sat, Dec
Re: [SR-Users] Dialog Module Hash Size vs Number of Dialogs
Thank you for your response! I am currently replacing the call_control module used with CDRTool Prepaid with the dialog module using hash tables. The speed and stability are tremendously better! My concern is two-fold: 1) I do not want calls to be blocked because I set the hash table size too small. 2) I do not want any memory usage problems that could cause kamailio stability issues. My understanding, or at least how I want to use the "hash_size" modparam, is that hash_size gives dialog a set memory space (aka slots and buckets) to store the dialogs being tracked. This is great since I "think" I will have constant memory consumption that will be a fixed amount and never "grow". However, I wanted to get a rough idea of how many dialogs (customer calls) I could track per kamailio instance to properly choose the hash size. I thought it would be easy to set the value to something very small in the lab and just run up the number of calls until kamailio hits an upper limit and fails to create any more dialogs. modparam("dialog", "hash_size", 32) However, I am able to create almost 2000 dialogs no matter what size I choose. After, reading the information in the link about hash tables and your response, I see how a larger table with more "hashing" increases lookup performance, but I still do not see how the total number of dialogs that the module tracks can be set so that the kamailio memory usage is protected. I still look at the hash_size as the key here and that there should be a relationship, perhaps rough at best, to the maximum number of dialogs supported in the table. Thanks so much for your time, Mark Blackord Digium Cloud Services On Sat, Dec 2, 2017 at 2:50 AM, Daniel-Constantin Mierla wrote: > Hello, > > hash size does not set any limitation to the number of dialogs (active > calls), it has impact on searching the dialogs, so if you have a lot of > active calls, increasing the hash size might improve performances. > Effectively the hash size is used to compute the number of slots (aka > buckets) the hash table is going to have, see more technical details about > hash tables at: > > - https://en.wikipedia.org/wiki/Hash_table > > Can you elaborate on your statement: > > > but even setting the hash size to a very tiny number does stop me from > creating hundreds of dialogs > > Do you mean you are not able to create as many dialogs as you want? > > Cheers, > Daniel > > On 01.12.17 19:54, Mark Blackford wrote: > > Hello, > > I am trying to properly size the use of the Dialog Module hash for our > implementation using: > > modparam("dialog", "hash_size", ) > > However, in my testing, I have been unable to figure out the relationship > between the hash size and a number of dialogs I need to support. I think > the hash size is specifying a memory block in kB, but even setting the hash > size to a very tiny number does stop me from creating hundreds of dialogs. > > Is there a way to determine a relationship between the hash size and a > rough number of dialogs that would be expected? > > An example of a a dialog looks like this from kamctl: > > [root@kamailio01 ~]# kamctl dialog show > dialog memory records > dialog:: hash=22:70 > state:: 4 > ref_count:: 2 > timestart:: 1512151205 > timeout:: 36083666 > callid:: 0gQAAC8WAAACBAAALxYAAClws2wyL8GE+CSgRY7HIhmg9ZUIISZad46ntOPng3i > PIcLaxzLFaytRTI7M0Bzz0g--@10.155.8.40 > from_uri:: sip:b53667d44239457fbc94fc2f4c4e2...@sip.dcs-staging.net > from_tag:: 10.155.8.40+1+689d7e5e+8fcf481a > caller_contact:: sip:43f0ae1480846185e8803f21e9f2b7 > 21@10.155.8.40:5060;transport=udp > caller_cseq:: 24115 > caller_route_set:: > caller_bind_addr:: udp:10.155.8.11:5060 > callee_bind_addr:: udp:10.155.8.11:5060 > to_uri:: sip:2052773...@sip.dcs-staging.net > to_tag:: sip+1+bdcd0004+2038f37c > callee_contact:: sip:ca2013e84f10348a1cc825c12562bd > e7@10.155.8.40:5060;transport=udp > callee_cseq:: 0 > callee_route_set:: > > > > Thanks! > -- > Mark Blackford > Digium Cloud Services > 678.230.8769 > > > > ___ > Kamailio (SER) - Users Mailing > Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda > Kamailio Advanced Training - www.asipto.com > Kamailio World Conference - May 14-16, 2018 - www.kamailioworld.com > > -- Mark Blackford Digium Cloud Services 678.230.8769 ___ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
[SR-Users] Dialog Module Hash Size vs Number of Dialogs
Hello, I am trying to properly size the use of the Dialog Module hash table for Kamailio 4.1.3 implementation using: modparam("dialog", "hash_size", ) However, in my testing, I have been unable to figure out the relationship between the hash size and a number of dialogs I need to support. I think the hash size is specifying a memory block in kB, but even setting the hash size to a very tiny number does stop me from creating hundreds of dialogs. Is there a way to determine a relationship between the hash size and a rough number of dialogs that would be expected? Thanks, -- Mark Blackford Digium Cloud Services 678.230.8769 ___ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
[SR-Users] Dialog Module Hash Size vs Number of Dialogs
Hello, I am trying to properly size the use of the Dialog Module hash for our implementation using: modparam("dialog", "hash_size", ) However, in my testing, I have been unable to figure out the relationship between the hash size and a number of dialogs I need to support. I think the hash size is specifying a memory block in kB, but even setting the hash size to a very tiny number does stop me from creating hundreds of dialogs. Is there a way to determine a relationship between the hash size and a rough number of dialogs that would be expected? An example of a a dialog looks like this from kamctl: [root@kamailio01 ~]# kamctl dialog show dialog memory records dialog:: hash=22:70 state:: 4 ref_count:: 2 timestart:: 1512151205 timeout:: 36083666 callid:: 0gQAAC8WAAACBAAALxYAAClws2wyL8GE+CSgRY7HIhmg9ZUIISZad46ntOPng3iPIcLaxzLFaytRTI7M0Bzz0g--@10.155.8.40 from_uri:: sip:b53667d44239457fbc94fc2f4c4e2...@sip.dcs-staging.net from_tag:: 10.155.8.40+1+689d7e5e+8fcf481a caller_contact:: sip:43f0ae1480846185e8803f21e9f2b721@10.155.8.40:5060 ;transport=udp caller_cseq:: 24115 caller_route_set:: caller_bind_addr:: udp:10.155.8.11:5060 callee_bind_addr:: udp:10.155.8.11:5060 to_uri:: sip:2052773...@sip.dcs-staging.net to_tag:: sip+1+bdcd0004+2038f37c callee_contact:: sip:ca2013e84f10348a1cc825c12562bde7@10.155.8.40:5060 ;transport=udp callee_cseq:: 0 callee_route_set:: Thanks! -- Mark Blackford Digium Cloud Services 678.230.8769 ___ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users