Re: [SR-Users] SCTP support for CDP

[Jason Penton]

Hi Sergey,

The peer looks correct and established/up. could you perhaps send me debug
output for CDP module when you try and route? Please also share your xml
configuration file for CDP module - there is most likely a configuration
problem in the routing section...

Cheers
Jason

On Tue, Mar 7, 2017 at 11:21 AM, Sergey Zyrianov <ser...@telenordigital.com>
wrote:

> Hi Carsten,
>
> Does this look ok on i-cscf:
>
> kamcmd cdp.list_peers
> {
> Realm: ims.mnc06.mcc240.3gppnetwork.org
> Identity: icscf.mnc06.mcc240.3gppnetwork.org
> Accept unknown peers: 1
> Connect timeout: 5
> Transaction timeout: 5
> Default auth session timeout: 3600
> Queue length: 32
> Workers: 16
> Peer count: 1
> Peers: {
> FQDN: 10.47.10.153
> Details: {
> State: I_Open
> Disabled: False
> Last used: 0
> Applications: {
> appid:vendorid: 16777216:10415
> }
> }
> }
> }
>
>
> Thanks,
> Sergey.
>
> On Mon, Mar 6, 2017 at 11:04 AM, Carsten Bock <cars...@ng-voice.com>
> wrote:
>
>> Hi Sergey,
>>
>> can you do the following:
>>
>> kamcmd cdp.list_peers
>>
>> If everything is working, you should see your peer
>>
>> Thanks,
>> Carsten
>>
>> 2017-03-03 23:08 GMT+01:00 Sergey Zyrianov <ser...@telenordigital.com>:
>> > Hi Carsten,
>> >
>> > I did socat relay from TCP to SCTP and Diameter caps exchange seems to
>> > happen. But CDP module still refuses to use this connection/peer:
>> >
>> >  AAASendMessage(): AAASendMessage(): Can't find a suitable connected
>> peer in
>> > the routing table.
>> >  0(1) ERROR: cdp [routing.c:275]: get_routing_peer():
>> get_routing_peer(): No
>> > connected DefaultRoute peer found for app_id 16777216 and vendor id
>> 10415.
>> >
>> >
>> > I suspect something wrong in the xml config for CDP I got:
>> > > > 
>> > > > port="7868"/>
>> > 
>> > 
>> >
>> > And this is HSS's response:
>> >
>> >
>> > Thanks,
>> > Sergey.
>> >
>> >
>> >
>> > 2017-03-03 17:14 GMT+01:00 Carsten Bock <cars...@ng-voice.com>:
>> >>
>> >> Hi,
>> >>
>> >> currently, SCTP is not implemented in the CDP module.
>> >>
>> >> Thanks,
>> >> Carsten
>> >>
>> >> 2017-03-03 10:12 GMT+01:00 Sergey Zyrianov <ser...@telenordigital.com
>> >:
>> >> > Hello,
>> >> >
>> >> > Can I enable use of SCTP for diameter connections by CDP module?
>> >> >
>> >> > Thanks,
>> >> > Sergey.
>> >> >
>> >> > ___
>> >> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>> list
>> >> > sr-users@lists.sip-router.org
>> >> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>> >> >
>> >>
>> >>
>> >>
>> >> --
>> >> Carsten Bock
>> >> CEO (Geschäftsführer)
>> >>
>> >> ng-voice GmbH
>> >> Millerntorplatz 1
>> >> 20359 Hamburg / Germany
>> >>
>> >> http://www.ng-voice.com
>> >> mailto:cars...@ng-voice.com
>> >>
>> >> Office +49 40 5247593-40
>> >> Fax +49 40 5247593-99
>> >>
>> >> Sitz der Gesellschaft: Hamburg
>> >> Registergericht: Amtsgericht Hamburg, HRB 120189
>> >> Geschäftsführer: Carsten Bock
>> >> Ust-ID: DE279344284
>> >>
>> >> Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
>> >> http://www.ng-voice.com/imprint/
>> >>
>> >> ___
>> >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> >> sr-users@lists.sip-router.org
>> >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>> >
>> >
>> >
>> > _______
>> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> > sr-users@lists.sip-r

Re: [SR-Users] Sip route can be as IMS PCSCF node

[Jason Penton]

Hello,

yes you can to both questions. There are sample configs in the source tree
as well.

Cheers
Jason

On Mon, Oct 17, 2016 at 12:21 PM, Surender Singh <surende...@hcl.com> wrote:

> Hi,
>
>
>
> Can we use sip router as IMS PCSCF to connectivity with IMS.
>
>
>
> Does sip router supports the diameter RX interface to connectivity with
> PCRF .
>
>
>
> Regards
>
> Surender Singh
>
>
>
>
>
>
>
> ::DISCLAIMER::
> 
> 
> 
>
> The contents of this e-mail and any attachment(s) are confidential and
> intended for the named recipient(s) only.
> E-mail transmission is not guaranteed to be secure or error-free as
> information could be intercepted, corrupted,
> lost, destroyed, arrive late or incomplete, or may contain viruses in
> transmission. The e mail and its contents
> (with or without referred errors) shall therefore not attach any liability
> on the originator or HCL or its affiliates.
> Views or opinions, if any, presented in this email are solely those of the
> author and may not necessarily reflect the
> views or opinions of HCL or its affiliates. Any form of reproduction,
> dissemination, copying, disclosure, modification,
> distribution and / or publication of this message without the prior
> written consent of authorized representative of
> HCL is strictly prohibited. If you have received this email in error
> please delete it and notify the sender immediately.
> Before opening any email and/or attachments, please check them for viruses
> and other defects.
>
> 
> 
> 
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*


*Voice:Mobile:* +234 (0) 702 000 000 7

+27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio invite fails with 403 at cscf

[Jason Penton]

cool, thanks for letting us know Owais.



On Tue, Sep 20, 2016 at 4:09 PM, Owais <millennium@gmail.com> wrote:

> Updating to the latest version git master removed it.
>
>
>
> --
> View this message in context: http://sip-router.1086192.n5.
> nabble.com/Kamailio-invite-fails-with-403-at-cscf-tp151639p151995.html
> Sent from the Users mailing list archive at Nabble.com.
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>



-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*


*Voice:Mobile:* +234 (0) 702 000 000 7

+27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio invite fails with 403 at cscf

[Jason Penton]

Hi,

Are you using NAT? Can you please send a pcap and logfile for the REGISTER
and INVITE?

Cheers
Jason

On Fri, Sep 9, 2016 at 9:18 AM, Owais Ahmad <millennium@gmail.com>
wrote:

> I am using kamailio 4.4.2 IMS
>
> Registration completes successfully, but S-CSCF gives the following error
> when P-CSCF relays INVITE to S-CSCF:
>
> 32(1349) ERROR: ims_dialog [dlg_handlers.c:190]: populate_leg_info(): bad
> sip message or missing Contact hdr
> 32(1349) ERROR: ims_dialog [dlg_handlers.c:1352]: dlg_onreply(): could not
> add further info to the dlg out
>
> Resultantly, P-CSCF returns a 403 with: "Forbidden - You must register
> first with a S-CSCF"
> It appears that pcscf_is_registered("location") is unable to lookup the
> location although the database seems to have valid entries.
>
> Any hints on how I can get the INVITE processed without this issue?
>
> Regards,
> Owais
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*


*Voice:Mobile:* +234 (0) 702 000 000 7

+27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] CDP Error S-CSCF Kamailio

[Jason Penton]

Hi Rodrigo,

There should be done logging before those lines. Could you please enable
debug and send the log file

On 11 Aug 2016 2:52 AM, "Rodrigo Moreira" 
wrote:

> Hello Carsten Bock,
>
> I got to advance in the event REGISTER, but now face the following
> problem:
>
> When I type the command: */etc/init.d/kamailio restart*
>
> Aug 10 20:40:52 scscf /usr/sbin/kamailio[2639]: INFO: cdp
> [diameter_peer.c:428]: diameter_peer_destroy(): destroy_diameter_peer():
> Terminating all children...
> Aug 10 20:40:52 scscf /usr/sbin/kamailio[2639]: INFO: cdp
> [diameter_peer.c:447]: diameter_peer_destroy(): destroy_diameter_peer():
> All processes terminatedaning up.
> Aug 10 20:40:52 scscf /usr/sbin/kamailio[2639]: INFO: cdp [worker.c:140]:
> worker_destroy(): Unlocking workers waiting on empty queue...
> Aug 10 20:40:52 scscf /usr/sbin/kamailio[2639]: INFO: cdp [worker.c:143]:
> worker_destroy(): Unlocking workers waiting on full queue...
> Aug 10 20:40:52 scscf /usr/sbin/kamailio[2639]: CRITICAL: cdp
> [diameter_peer.c:487]: diameter_peer_destroy(): destroy_diameter_peer():
> Bye Bye from C Diameter Peer test
> Aug 10 20:40:52 scscf /usr/sbin/kamailio[2639]: INFO: cdp [mod.c:244]:
> cdp_exit(): ... CDiameterPeer child stoped
> Aug 10 20:40:52 scscf /usr/sbin/kamailio[2639]: INFO: 
> [sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized
> Aug 10 20:40:52 scscf systemd[1]: kamailio.service: control process
> exited, code=exited status=255
> Aug 10 20:40:52 scscf systemd[1]: Failed to start Kamailio (OpenSER) - the
> Open Source SIP Server.
> Aug 10 20:40:52 scscf systemd[1]: Unit kamailio.service entered failed
> state.
>
>
> I can not start the Kamailio, I used the examples codes available in the
> repository (GIT).
>
> You suggest something I may be doing wrong?
>
> Can you help me?
>
> I attached my config files.
>
> Thank you very much.
>
> Regards.
> --
> Rodrigo M.
> (37) 9132-4539
> (34) 9889-3069
> rodrigo.moreira2007
>
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Rx Interface connected, get error code: SIP/2.0 403 Forbidden - You must register first with a S-CSCF

[Jason Penton]

Thanks Krisitan,

Was last request ;) -- can you please send your log file with debug enabled
during the SUBSCRIBE. If you are concerned about sensitive info, you can
send to me privately.

Cheers
Jason

On Mon, Jul 18, 2016 at 3:21 PM, Kristian Martens <
kristian.mart...@freenet.de> wrote:

> All,
>
> thank you for the prompt response. Attached you can find the current
> configuration files. SUBSCRIBE works fine, if Rx isn't connected.
> "Auth Lifetime" or "Session Timeout" are set to 7200 in AAR - should be
> OK in my opinion.
>
> Best Regards,
> Kristian
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*


*Voice:Mobile:* +234 (0) 702 000 000 7

+27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Rx Interface connected, get error code: SIP/2.0 403 Forbidden - You must register first with a S-CSCF

[Jason Penton]

Hi Kristian,

I will look into your pcaps this weekend. One point to look out for in the
meantime.

Make sure that the "contact" can be found for the subscribe. The 403 is
issued because we cannot find a contact based on the SUBSCRIBE message.
depending on your cfg, usrloc will try to use contact header, via and/or
received IPs and ports to locate your contact. This is a 'workaround' in
the absence of ipsec which uniquely identifies each UE connection.

Can you also, please send your cfg file as well as the log file when you
get the 403.

Cheers
Jason

On Fri, Jul 15, 2016 at 2:07 PM, Federico Favaro <
federico.fav...@athonet.com> wrote:

> Dear Kristian,
>
> Just take a look at the value you have at "Auth Lifetime" or "Session
> Timeout" AVPs on AAR request from P-CSCF through PCRF. Those are (afaik)
> Base Diameter AVPs. Those values are referring to a timeout to cleanup the
> diameter session. It seems like, when this timer will expire, the session
> will be cleaned up together with the infos in usrloc.
> This way, P-CSCF receives a packet from an UE which is basically unknown,
> so the request will be dropped and an error will be sent out.
> So, in theory, this value should be much more than the re-registration of
> the client itself.
> Anyway, i am only guessing because i haven't still completely addressed
> the problem
>
> Best,
>
> Federico Favaro
>
> On 07/14/2016 06:14 PM, Kristian Martens wrote:
>
> Hi,
>
> I have installed Kamailio version 4.4.1. Everything works just fine. If
> I connect a PCRF via Rx to the P-CSCF, the registration still runs
> through as expected but the subsequent SUBSCRIBE is rejected with "403
> Forbidden - You must register first with a S-CSCF" error cause or is
> simply ignored (see attached wireshark traces).
>
> And, if I disconnect Rx and restart the P-CSCF, the "forbidden" problem
> still persists. (But I can work around this by cleaning up the P-CSCF
> database.)
>
> Any suggestions how I could get Rx working?
>
> Thanks,
> Kristian
>
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing 
> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Federico Favaro
> R Department
> Athonet s.r.lfederico.fav...@athonet.com
>
>
> _______
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*


*Voice:Mobile:* +234 (0) 702 000 000 7

+27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Issue loading ims_dialog module

[Jason Penton]

Hi Vikram,

Seems really strange. Any way I could get ssh access? You are welcome to
engage me privately to try and resolve and then we can post resolution to
the list.

Cheers
Jason

On Thu, Jun 30, 2016 at 6:08 PM, Vikram Chhibber <vikram.chhib...@gmail.com>
wrote:

> I installed Kamailio after compiling 4.4 source:
>
>
> Here is the output:
>
> ldd /usr/local/lib64/kamailio/modules/ims_dialog.so
>
> linux-vdso.so.1 =>  (0x7ffdcce69000)
>
> libkmi.so.1 => /usr/local/lib64/kamailio/libkmi.so.1
> (0x7fefa3fba000)
>
> libsrdb1.so.1 => /usr/local/lib64/kamailio/libsrdb1.so.1
> (0x7fefa3d8a000)
>
> libsrutils.so.1 => /usr/local/lib64/kamailio/libsrutils.so.1
> (0x7fefa3b78000)
>
> libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x7fefa37a8000)
>
> libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x7fefa349f000)
>
> /lib64/ld-linux-x86-64.so.2 (0x55f20aace000)
>
>
> and this is the mpath set in kamailio.cfg
>
> mpath="/usr/local/lib64/kamailio/modules/"
>
>
> Thanks
>
> On Thu, Jun 30, 2016 at 12:45 AM, Jason Penton <jason.pen...@smilecoms.com
> > wrote:
>
>> Hi Vikram,
>>
>> How did you install? From source? from Pkg?
>>
>> Also, please send output of:
>>
>> ldd /usr/local/lib64/kamailio/modules/ims_dialog.so
>>
>>
>>
>> On Thu, Jun 30, 2016 at 2:24 AM, Vikram Chhibber <
>> vikram.chhib...@gmail.com> wrote:
>>
>>> Hi All,
>>>
>>> I am trying to bring-up PCSCF on releae 4.4 and I am getting errors
>>> related to loading of ims_dialog module.
>>> The mpath is set correctly in kamailio.cfg and ims_dialog.so is present
>>> in that path.
>>> Interestingly, it is able to load rest of the modules from the same
>>> locaiton.
>>>
>>> ls -lrt /usr/local/lib64/kamailio/modules/ims_dialog.so
>>> -rwxr-xr-x 1 root root 953760 Jun 29 16:37
>>> /usr/local/lib64/kamailio/modules/ims_dialog.so
>>>
>>> Any pointers will be appreciated.
>>>
>>> -- Unit kamailio.service has begun starting up.
>>> Jun 29 17:08:17 kamailio1 kamctl[2914]: ** INFO: Starting Kamailio :
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: 
>>> [sr_module.c:582]: load_module(): could not open module
>>> >> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3365]:
>>> yyerror_at(): parse error in config file
>>> /usr/local/etc/kamailio//kamailio.cfg, line 169, colum
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: 
>>> [modparam.c:150]: set_mod_param_regex(): No module matching 
>>> found
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
>>> yyerror_at(): parse error in config file
>>> /usr/local/etc/kamailio//kamailio.cfg, line 313, colum
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: 
>>> [modparam.c:150]: set_mod_param_regex(): No module matching 
>>> found
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
>>> yyerror_at(): parse error in config file
>>> /usr/local/etc/kamailio//kamailio.cfg, line 314, colum
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: 
>>> [modparam.c:150]: set_mod_param_regex(): No module matching 
>>> found
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
>>> yyerror_at(): parse error in config file
>>> /usr/local/etc/kamailio//kamailio.cfg, line 315, colum
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: 
>>> [modparam.c:150]: set_mod_param_regex(): No module matching 
>>> found
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
>>> yyerror_at(): parse error in config file
>>> /usr/local/etc/kamailio//kamailio.cfg, line 316, colum
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR:  [cfg.y:3228]:
>>> yyparse(): cfg. parser: failed to find command set_dlg_profile (params 1)
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
>>> yyerror_at(): parse error in config file
>>> /usr/local/etc/kamailio//kamailio.cfg, line 1009, colu
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR:  [cfg.y:3228]:
>>> yyparse(): cfg. parser: failed to find command set_dlg_profile (params 1)
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
>>> yyerror_at(): parse error in config file
>>> /usr/local/etc/kamailio//kamailio.cfg, line 1077, colu
>>> Jun 29 17:08:17 kamailio1 kamailio[2939]: INFO:  [sctp_core.c:53]:
>>> sct

Re: [SR-Users] ipsec support in PCSCF

[Jason Penton]

IPSEC is not supported "completely" at the moment. The ims_usrloc_pcscf and
ims_registrar_pcscf modules will support it when it's added , but there is
no interface yet to the OS ipsec functions atm.

This is currently a TODO so if you have time and resource you are welcome
to work on it and we can point you in the right direction to get it in.

Cheers
Jason

On Wed, Jun 29, 2016 at 9:00 PM, Russell McConnachie <russ...@mcconnachie.ca
> wrote:

> I do not believe that functionality exists today.
>
> On 29 June 2016 at 11:51, Vikram Chhibber <vikram.chhib...@gmail.com>
> wrote:
>
>> No.
>> I just need ipsec between UE and PCSCF along with support of
>> Security-Client, Security-Server and Security-Verify headers.
>> Basically, support for AKAv1-MD5 where SCSCF sends CK and IK in
>> WWW-Authenticate header and PCSCF pushed security associations in the
>> kernel.
>> Please let me know.
>>
>> On Wed, Jun 29, 2016 at 11:47 AM, Russell McConnachie <
>> russ...@mcconnachie.ca> wrote:
>>
>>> Do you mean you're wanting to know if you can setup a IPsec transport
>>> mode connection between your P-CSCF, I-CSCF, S-CSCF?  If so, that is all at
>>> the OS level and not anything to do with Kamailio.  Look at StrongSWAN,
>>> OpenSWAN or Racoon IPsec/IKE implementations.
>>>
>>> Thanks
>>>
>>> On 29 June 2016 at 10:51, Vikram Chhibber <vikram.chhib...@gmail.com>
>>> wrote:
>>>
>>>> Hi All,
>>>>
>>>> I did not get any concrete information on whether PCSCF supports
>>>> transport mode ipsec in Kamailio release 4.4. It is mentioned that it
>>>> is not supported in release 4.0.
>>>>
>>>> Could anyone please let me know the status on this?
>>>>
>>>> Thanks,
>>>> Vikram
>>>>
>>>> ___
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>> sr-users@lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>
>>> ___
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users@lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>
>> ___
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*


*Voice:Mobile:* +234 (0) 702 000 000 7

+27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Issue loading ims_dialog module

[Jason Penton]

Hi Vikram,

How did you install? From source? from Pkg?

Also, please send output of:

ldd /usr/local/lib64/kamailio/modules/ims_dialog.so



On Thu, Jun 30, 2016 at 2:24 AM, Vikram Chhibber <vikram.chhib...@gmail.com>
wrote:

> Hi All,
>
> I am trying to bring-up PCSCF on releae 4.4 and I am getting errors
> related to loading of ims_dialog module.
> The mpath is set correctly in kamailio.cfg and ims_dialog.so is present in
> that path.
> Interestingly, it is able to load rest of the modules from the same
> locaiton.
>
> ls -lrt /usr/local/lib64/kamailio/modules/ims_dialog.so
> -rwxr-xr-x 1 root root 953760 Jun 29 16:37
> /usr/local/lib64/kamailio/modules/ims_dialog.so
>
> Any pointers will be appreciated.
>
> -- Unit kamailio.service has begun starting up.
> Jun 29 17:08:17 kamailio1 kamctl[2914]: ** INFO: Starting Kamailio :
> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR:  [sr_module.c:582]:
> load_module(): could not open module
>  Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3365]:
> yyerror_at(): parse error in config file
> /usr/local/etc/kamailio//kamailio.cfg, line 169, colum
> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR:  [modparam.c:150]:
> set_mod_param_regex(): No module matching  found
> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
> yyerror_at(): parse error in config file
> /usr/local/etc/kamailio//kamailio.cfg, line 313, colum
> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR:  [modparam.c:150]:
> set_mod_param_regex(): No module matching  found
> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
> yyerror_at(): parse error in config file
> /usr/local/etc/kamailio//kamailio.cfg, line 314, colum
> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR:  [modparam.c:150]:
> set_mod_param_regex(): No module matching  found
> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
> yyerror_at(): parse error in config file
> /usr/local/etc/kamailio//kamailio.cfg, line 315, colum
> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR:  [modparam.c:150]:
> set_mod_param_regex(): No module matching  found
> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
> yyerror_at(): parse error in config file
> /usr/local/etc/kamailio//kamailio.cfg, line 316, colum
> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR:  [cfg.y:3228]:
> yyparse(): cfg. parser: failed to find command set_dlg_profile (params 1)
> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
> yyerror_at(): parse error in config file
> /usr/local/etc/kamailio//kamailio.cfg, line 1009, colu
> Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR:  [cfg.y:3228]:
> yyparse(): cfg. parser: failed to find command set_dlg_profile (params 1)
> Jun 29 17:08:17 kamailio1 kamailio[2939]: :  [cfg.y:3368]:
> yyerror_at(): parse error in config file
> /usr/local/etc/kamailio//kamailio.cfg, line 1077, colu
> Jun 29 17:08:17 kamailio1 kamailio[2939]: INFO:  [sctp_core.c:53]:
> sctp_core_destroy(): SCTP API not initialized
> Jun 29 17:08:20 kamailio1 kamctl[2914]: ** ERROR: PID file
> /var/run/kamailio.pid does not exist -- Kamailio start failed
> Jun 29 17:08:20 kamailio1 systemd[1]: kamailio.service: Control process
> exited, code=exited status=1
> Jun 29 17:08:20 kamailio1 systemd[1]: Failed to start Kamailio SIP Server.
> -- Subject: Unit kamailio.service has failed
>
> Thanks
>
> _______
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*


*Voice:Mobile:* +234 (0) 702 000 000 7

+27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration of client

[Jason Penton]

Hi Christoff,

yes, it will - I back-ported to the 4.4 branch.

Cheers
Jason

On Mon, Jun 27, 2016 at 2:30 PM, Christoph Valentin <
christoph.valen...@gmx.at> wrote:

> Hi,
>
> Will this bugfix be part of the release 4.4.2?
>
> Thanks,
> Christoph
>
> *Gesendet:* Dienstag, 07. Juni 2016 um 16:48 Uhr
> *Von:* "Christoph Valentin" <christoph.valen...@gmx.at>
> *An:* "Jason Penton" <jason.pen...@smilecoms.com>
> *Cc:* "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
> Users Mailing List" <sr-users@lists.sip-router.org>
> *Betreff:* Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration
> of client
> Jason,
>
> For the time being, I use the RPMs from
>
> http://download.opensuse.org/repositories/home:/kamailio:/v4.4.x-rpms/RHEL_7/
>
> How it is/will be possible to get your patch for verification?
>
> Thanks,
> Christoph
>
> *Gesendet:* Donnerstag, 02. Juni 2016 um 16:32 Uhr
> *Von:* "Jason Penton" <jason.pen...@smilecoms.com>
> *An:* "Carsten Bock" <cars...@ng-voice.com>
> *Cc:* "Christoph Valentin" <christoph.valen...@gmx.at>, "SIP Router -
> Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List" <
> sr-users@lists.sip-router.org>
> *Betreff:* Re: Re: [SR-Users] S-CSCF (kamailio) crashes after
> deregistration of client
> @Christoph,
>
> please use master - I have just committed a patch. Daniel, could you
> please backport? is there a howto on how to backport a commit to previous
> versions?
>
> Cheers
> Jason
>
> On Thu, Jun 2, 2016 at 4:11 PM, Jason Penton <jason.pen...@smilecoms.com>
> wrote:
>>
>> Yes, agreed,
>>
>> should not crash ;) - I see the bug and will commit just now.
>>
>> cheers
>> Jason
>>
>>
>>
> ___ SIP Express Router (SER)
> and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>



-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*


*Voice:Mobile:* +234 (0) 702 000 000 7

+27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration of client

[Jason Penton]

@Christoph,

please use master - I have just committed a patch. Daniel, could you please
backport? is there a howto on how to backport a commit to previous versions?

Cheers
Jason

On Thu, Jun 2, 2016 at 4:11 PM, Jason Penton <jason.pen...@smilecoms.com>
wrote:

> Yes, agreed,
>
> should not crash ;) - I see the bug and will commit just now.
>
> cheers
> Jason
>
> On Thu, Jun 2, 2016 at 4:07 PM, Carsten Bock <cars...@ng-voice.com> wrote:
>
>> Hi Christoph,
>>
>> "Now I installed the same packages but from kamailio-4.4.1-1.1, did
>> not change the config and repeated the test - same result."
>>
>> Where did you obtain those packages? These are definitely NOT the
>> trunk version (according to the Makefiles, Kamailio is at Version
>> 5.0.0)
>>
>> Thanks,
>> Carsten
>>
>> 2016-06-02 16:41 GMT+03:00 Christoph Valentin <christoph.valen...@gmx.at
>> >:
>> > Hi Jason,
>> >
>> > Sorry for delay, but I did like to try Carsten's proposal, before I
>> send you
>> > the GDB traceback.
>> >
>> > Now I installed the same packages but from kamailio-4.4.1-1.1, did not
>> > change the config and repeated the test - same result.
>> >
>> > tshark, level 2 logs and GDB traceback in attachment of this mail.
>> >
>> > I found two cores from the same time, only one fits to kamailio.pid,
>> but I
>> > did two backtraces.
>> >
>> > Two suspects:
>> >1)  deactivated the dispatchers (want to activate in later step)
>> >2)  deactivated presence DB (want to activate in a later step)
>> >
>> > Thanks for help,
>> > Christoph
>> >
>> > Gesendet: Dienstag, 31. Mai 2016 um 08:25 Uhr
>> > Von: "Jason Penton" <jason.pen...@smilecoms.com>
>> > An: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
>> Users
>> > Mailing List" <sr-users@lists.sip-router.org>
>> > Betreff: Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration
>> of
>> > client
>> >
>> > Will look into this for you later today. Any chance of a gdb backtrace
>> in
>> > the meantime?
>> >
>> > On 31 May 2016 8:07 AM, "Christoph Valentin" <christoph.valen...@gmx.at
>> >
>> > wrote:
>> >>
>> >> I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected
>> via
>> >> Cx to an HSS and connected via Mw to a Zoiper Client.
>> >>
>> >> I installed following RPMs:
>> >> kamailio-xml-4.4.0-12.1.x86_64
>> >> kamailio-4.4.0-12.1.x86_64
>> >> kamailio-debuginfo-4.4.0-12.1.x86_64
>> >> kamailio-mysql-4.4.0-12.1.x86_64
>> >> kamailio-ims-4.4.0-12.1.x86_64
>> >> kamailio-tls-4.4.0-12.1.x86_64
>> >> kamailio-presence-4.4.0-12.1.x86_64
>> >>
>> >> and copied config from kamailio-4.4.0_src.tar.gz
>> >> examples/scscf
>> >>
>> >> Modified config (see attached etc_kamailio.tar.gz)
>> >>
>> >> Prepared Zoiper client, prepared HSS
>> >>
>> >> Then started S-CSCF (kamctl start), registered user xa...@vict-ims.net
>> ,
>> >> registered user yvo...@vict-ims.net, deregistered user
>> yvo...@vict-ims.net
>> >>
>> >> After some time S-CSCF gets signal 11 and stops, I guess its some timer
>> >> expiring thats the reason (tshark and kamailio level 3 logs in
>> attachment)
>> >> ---> who's wrong? Is it a bug in kamailio? Is it a wrong config?
>> >>
>> >> Thanks for help
>> >>
>> >> ___
>> >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> >> sr-users@lists.sip-router.org
>> >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>> >>
>> >
>> >
>> >
>> > This email is subject to the disclaimer of Smile Communications at
>> > http://www.smilecoms.com/home/email-disclaimer/
>> >
>> > _______ SIP Express Router
>> (SER) and
>> > Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org
>> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>>
>> --
>> Carsten Bock
>> CEO (Geschäftsführer)
>>
>> ng-voice GmbH
>> Millerntorplatz 1
>&

Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration of client

[Jason Penton]

Yes, agreed,

should not crash ;) - I see the bug and will commit just now.

cheers
Jason

On Thu, Jun 2, 2016 at 4:07 PM, Carsten Bock <cars...@ng-voice.com> wrote:

> Hi Christoph,
>
> "Now I installed the same packages but from kamailio-4.4.1-1.1, did
> not change the config and repeated the test - same result."
>
> Where did you obtain those packages? These are definitely NOT the
> trunk version (according to the Makefiles, Kamailio is at Version
> 5.0.0)
>
> Thanks,
> Carsten
>
> 2016-06-02 16:41 GMT+03:00 Christoph Valentin <christoph.valen...@gmx.at>:
> > Hi Jason,
> >
> > Sorry for delay, but I did like to try Carsten's proposal, before I send
> you
> > the GDB traceback.
> >
> > Now I installed the same packages but from kamailio-4.4.1-1.1, did not
> > change the config and repeated the test - same result.
> >
> > tshark, level 2 logs and GDB traceback in attachment of this mail.
> >
> > I found two cores from the same time, only one fits to kamailio.pid, but
> I
> > did two backtraces.
> >
> > Two suspects:
> >1)  deactivated the dispatchers (want to activate in later step)
> >2)  deactivated presence DB (want to activate in a later step)
> >
> > Thanks for help,
> > Christoph
> >
> > Gesendet: Dienstag, 31. Mai 2016 um 08:25 Uhr
> > Von: "Jason Penton" <jason.pen...@smilecoms.com>
> > An: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users
> > Mailing List" <sr-users@lists.sip-router.org>
> > Betreff: Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration of
> > client
> >
> > Will look into this for you later today. Any chance of a gdb backtrace in
> > the meantime?
> >
> > On 31 May 2016 8:07 AM, "Christoph Valentin" <christoph.valen...@gmx.at>
> > wrote:
> >>
> >> I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected via
> >> Cx to an HSS and connected via Mw to a Zoiper Client.
> >>
> >> I installed following RPMs:
> >> kamailio-xml-4.4.0-12.1.x86_64
> >> kamailio-4.4.0-12.1.x86_64
> >> kamailio-debuginfo-4.4.0-12.1.x86_64
> >> kamailio-mysql-4.4.0-12.1.x86_64
> >> kamailio-ims-4.4.0-12.1.x86_64
> >> kamailio-tls-4.4.0-12.1.x86_64
> >> kamailio-presence-4.4.0-12.1.x86_64
> >>
> >> and copied config from kamailio-4.4.0_src.tar.gz
> >> examples/scscf
> >>
> >> Modified config (see attached etc_kamailio.tar.gz)
> >>
> >> Prepared Zoiper client, prepared HSS
> >>
> >> Then started S-CSCF (kamctl start), registered user xa...@vict-ims.net,
> >> registered user yvo...@vict-ims.net, deregistered user
> yvo...@vict-ims.net
> >>
> >> After some time S-CSCF gets signal 11 and stops, I guess its some timer
> >> expiring thats the reason (tshark and kamailio level 3 logs in
> attachment)
> >> ---> who's wrong? Is it a bug in kamailio? Is it a wrong config?
> >>
> >> Thanks for help
> >>
> >> ___
> >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> >> sr-users@lists.sip-router.org
> >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> >>
> >
> >
> >
> > This email is subject to the disclaimer of Smile Communications at
> > http://www.smilecoms.com/home/email-disclaimer/
> >
> > _______ SIP Express Router (SER)
> and
> > Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org
> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> --
> Carsten Bock
> CEO (Geschäftsführer)
>
> ng-voice GmbH
> Millerntorplatz 1
> 20359 Hamburg / Germany
>
> http://www.ng-voice.com
> mailto:cars...@ng-voice.com
>
> Office +49 40 5247593-40
> Fax +49 40 5247593-99
>
> Sitz der Gesellschaft: Hamburg
> Registergericht: Amtsgericht Hamburg, HRB 120189
> Geschäftsführer: Carsten Bock
> Ust-ID: DE279344284
>
> Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
> http://www.ng-voice.com/imprint/
>



-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*


*Voice:Mobile:* +234 (0) 702 000 000 7

+27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration of client

[Jason Penton]

Hi Christoph,

Can you pls send your cfg file? Also, are you not using DB mode?

Cheers
Jason

On Thu, Jun 2, 2016 at 3:41 PM, Christoph Valentin <
christoph.valen...@gmx.at> wrote:

> Hi Jason,
>
> Sorry for delay, but I did like to try Carsten's proposal, before I send
> you the GDB traceback.
>
> Now I installed the same packages but from kamailio-4.4.1-1.1, did not
> change the config and repeated the test - same result.
>
> tshark, level 2 logs and GDB traceback in attachment of this mail.
>
> I found two cores from the same time, only one fits to kamailio.pid, but I
> did two backtraces.
>
> Two suspects:
>1)  deactivated the dispatchers (want to activate in later step)
>2)  deactivated presence DB (want to activate in a later step)
>
> Thanks for help,
> Christoph
>
> *Gesendet:* Dienstag, 31. Mai 2016 um 08:25 Uhr
> *Von:* "Jason Penton" <jason.pen...@smilecoms.com>
> *An:* "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
> Users Mailing List" <sr-users@lists.sip-router.org>
> *Betreff:* Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration
> of client
>
> Will look into this for you later today. Any chance of a gdb backtrace in
> the meantime?
> On 31 May 2016 8:07 AM, "Christoph Valentin" <christoph.valen...@gmx.at>
> wrote:
>>
>> I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected via
>> Cx to an HSS and connected via Mw to a Zoiper Client.
>>
>> I installed following RPMs:
>> kamailio-xml-4.4.0-12.1.x86_64
>> kamailio-4.4.0-12.1.x86_64
>> kamailio-debuginfo-4.4.0-12.1.x86_64
>> kamailio-mysql-4.4.0-12.1.x86_64
>> kamailio-ims-4.4.0-12.1.x86_64
>> kamailio-tls-4.4.0-12.1.x86_64
>> kamailio-presence-4.4.0-12.1.x86_64
>>
>> and copied config from kamailio-4.4.0_src.tar.gz
>> examples/scscf
>>
>> Modified config (see attached etc_kamailio.tar.gz)
>>
>> Prepared Zoiper client, prepared HSS
>>
>> Then started S-CSCF (kamctl start), registered user xa...@vict-ims.net,
>> registered user yvo...@vict-ims.net, deregistered user
>> yvo...@vict-ims.net
>>
>> After some time S-CSCF gets signal 11 and stops, I guess its some timer
>> expiring thats the reason (tshark and kamailio level 3 logs in
>> attachment) ---> who's wrong? Is it a bug in kamailio? Is it a wrong config?
>>
>> Thanks for help
>>
>> ___
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>
>
>
> This email is subject to the disclaimer of Smile Communications at 
> http://www.smilecoms.com/home/email-disclaimer/
>
> ___ SIP Express Router (SER)
> and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>



-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*


*Voice:Mobile:* +234 (0) 702 000 000 7

+27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] S-CSCF (kamailio) crashes after deregistration of client

[Jason Penton]

Will look into this for you later today. Any chance of a gdb backtrace in
the meantime?
On 31 May 2016 8:07 AM, "Christoph Valentin" 
wrote:

> I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected via
> Cx to an HSS and connected via Mw to a Zoiper Client.
>
> I installed following RPMs:
> kamailio-xml-4.4.0-12.1.x86_64
> kamailio-4.4.0-12.1.x86_64
> kamailio-debuginfo-4.4.0-12.1.x86_64
> kamailio-mysql-4.4.0-12.1.x86_64
> kamailio-ims-4.4.0-12.1.x86_64
> kamailio-tls-4.4.0-12.1.x86_64
> kamailio-presence-4.4.0-12.1.x86_64
>
> and copied config from kamailio-4.4.0_src.tar.gz
> examples/scscf
>
> Modified config (see attached etc_kamailio.tar.gz)
>
> Prepared Zoiper client, prepared HSS
>
> Then started S-CSCF (kamctl start), registered user xa...@vict-ims.net,
> registered user yvo...@vict-ims.net, deregistered user yvo...@vict-ims.net
>
> After some time S-CSCF gets signal 11 and stops, I guess its some timer
> expiring thats the reason (tshark and kamailio level 3 logs in
> attachment) ---> who's wrong? Is it a bug in kamailio? Is it a wrong config?
>
> Thanks for help
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] [sr-dev] http_async_client segfault

[Jason Penton]

Hey Daniel,

Yes it has something to do with pthreads and libnss. Something to do with
pthread library being linked by an .so and not linked by the main
application. I am trying to reproduce now and will report back.

Cheers
Jason

On Mon, 30 May 2016 at 11:08 Daniel-Constantin Mierla <mico...@gmail.com>
wrote:

> Hello,
>
> this shows that one of the threads created by the module or by one of its
> dependency libs crashed. Not sure which lib creates the thread here,
> because the module depends on libevent and libcurl. It appears to be in the
> functions resolving the domain part of the http url.
>
> Can you reproduce it?
>
> Cheers,
> Daniel
>
> On 30/05/16 09:35, Jason Penton wrote:
>
> Hi,
>
> Has anyone experienced segfault using http_async_query from
> http_async_client module? Here is BT:
>
> #0  __GI_fgets_unlocked (buf=0x7fca23ffe660 "127.0.0.1", n=n@entry=1032,
> fp=0x7fca23ffe660) at iofgets_u.c:53
> 53  iofgets_u.c: No such file or directory.
> (gdb) bt
> #0  __GI_fgets_unlocked (buf=0x7fca23ffe660 "127.0.0.1", n=n@entry=1032,
> fp=0x7fca23ffe660) at iofgets_u.c:53
> #1  0x7fca68f08afa in get_contents (stream=, len=1032,
> linebuf=0x7fca23ffe660 "127.0.0.1") at nss_files/files-XXX.c:201
> #2  internal_getent (result=0x7fca23ffe5c0, buffer=buffer@entry=0x7fca23ffe640
> "\177", buflen=buflen@entry=1064, errnop=errnop@entry=0x7fca23ffebb0,
> herrnop=herrnop@entry=0x7fca23ffec00, af=af@entry=0,
>flags=flags@entry=0) at nss_files/files-XXX.c:246
> #3  0x7fca68f09ca3 in _nss_files_gethostbyname4_r 
> (name=name@entry=0x7fca2e790fa0
> "localhost", pat=pat@entry=0x7fca23ffebe0, buffer=buffer@entry=0x7fca23ffe640
> "\177", buflen=buflen@entry=1064,
>errnop=errnop@entry=0x7fca23ffebb0, herrnop=herrnop@entry=0x7fca23ffec00,
> ttlp=ttlp@entry=0x0) at nss_files/files-hosts.c:402
> #4  0x7fca79eb7757 in gaih_inet (name=, 
> name@entry=0x7fca2e790fa0
> "localhost", service=, req=req@entry=0x7fca341c7490,
> pai=pai@entry=0x7fca23ffed10,
>naddrs=naddrs@entry=0x7fca23ffed00) at
> ../sysdeps/posix/getaddrinfo.c:850
> #5  0x7fca79ebae0d in __GI_getaddrinfo (name=0x7fca2e790fa0
> "localhost", service=0x7fca23ffeec0 "18000", hints=0x7fca341c7490,
> pai=0x7fca23ffee78) at ../sysdeps/posix/getaddrinfo.c:2406
> #6  0x7fca6e0f80f4 in ?? () from
> /usr/lib/x86_64-linux-gnu/libcurl.so.4
> #7  0x7fca6e104fa4 in ?? () from
> /usr/lib/x86_64-linux-gnu/libcurl.so.4
> #8  0x7fca6e10284b in ?? () from
> /usr/lib/x86_64-linux-gnu/libcurl.so.4
> #9  0x7fca723c9182 in start_thread (arg=0x7fca23fff700) at
> pthread_create.c:312
> #10 0x7fca79ee547d in clone () at
> ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
>
> Camille, are you maintaining this module now?
>
>
>
>
>
> ___
> sr-dev mailing 
> listsr-...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
> --
> Daniel-Constantin Mierlahttp://www.asipto.com - 
> http://www.kamailio.orghttp://twitter.com/#!/miconda - 
> http://www.linkedin.com/in/miconda
>
> ___
> sr-dev mailing list
> sr-...@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

[SR-Users] http_async_client segfault

[Jason Penton]

Hi,

Has anyone experienced segfault using http_async_query from
http_async_client module? Here is BT:

#0  __GI_fgets_unlocked (buf=0x7fca23ffe660 "127.0.0.1", n=n@entry=1032,
fp=0x7fca23ffe660) at iofgets_u.c:53
53  iofgets_u.c: No such file or directory.
(gdb) bt
#0  __GI_fgets_unlocked (buf=0x7fca23ffe660 "127.0.0.1", n=n@entry=1032,
fp=0x7fca23ffe660) at iofgets_u.c:53
#1  0x7fca68f08afa in get_contents (stream=, len=1032,
linebuf=0x7fca23ffe660 "127.0.0.1") at nss_files/files-XXX.c:201
#2  internal_getent (result=0x7fca23ffe5c0, buffer=buffer@entry=0x7fca23ffe640
"\177", buflen=buflen@entry=1064, errnop=errnop@entry=0x7fca23ffebb0,
herrnop=herrnop@entry=0x7fca23ffec00, af=af@entry=0,
   flags=flags@entry=0) at nss_files/files-XXX.c:246
#3  0x7fca68f09ca3 in _nss_files_gethostbyname4_r
(name=name@entry=0x7fca2e790fa0
"localhost", pat=pat@entry=0x7fca23ffebe0, buffer=buffer@entry=0x7fca23ffe640
"\177", buflen=buflen@entry=1064,
   errnop=errnop@entry=0x7fca23ffebb0, herrnop=herrnop@entry=0x7fca23ffec00,
ttlp=ttlp@entry=0x0) at nss_files/files-hosts.c:402
#4  0x7fca79eb7757 in gaih_inet (name=,
name@entry=0x7fca2e790fa0
"localhost", service=, req=req@entry=0x7fca341c7490,
pai=pai@entry=0x7fca23ffed10,
   naddrs=naddrs@entry=0x7fca23ffed00) at
../sysdeps/posix/getaddrinfo.c:850
#5  0x7fca79ebae0d in __GI_getaddrinfo (name=0x7fca2e790fa0
"localhost", service=0x7fca23ffeec0 "18000", hints=0x7fca341c7490,
pai=0x7fca23ffee78) at ../sysdeps/posix/getaddrinfo.c:2406
#6  0x7fca6e0f80f4 in ?? () from /usr/lib/x86_64-linux-gnu/libcurl.so.4
#7  0x7fca6e104fa4 in ?? () from /usr/lib/x86_64-linux-gnu/libcurl.so.4
#8  0x7fca6e10284b in ?? () from /usr/lib/x86_64-linux-gnu/libcurl.so.4
#9  0x7fca723c9182 in start_thread (arg=0x7fca23fff700) at
pthread_create.c:312
#10 0x7fca79ee547d in clone () at
../sysdeps/unix/sysv/linux/x86_64/clone.S:111

Camille, are you maintaining this module now?
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio IMS_QOS

[Jason Penton]

imeout for CDP session with Rx session ID: 
>> [proxy1.sw.example.com;2463925226;1]
>> and associated contact [] and domain []
>> 39(21770) DEBUG: ims_qos [cdpeventprocessor.c:228]:
>> cdp_cb_event_process(): This is a media bearer session session39(21770)
>> DEBUG: ims_qos [cdpeventprocessor.c:316]: free_cdp_cb_event(): Freeing cdpb
>> CB event structure
>> 39(21770) DEBUG: ims_qos [cdpeventprocessor.c:318]: free_cdp_cb_event():
>> about to free string from cdp CB event [proxy1.sw.example.com
>> ;2463925226;1]
>>  0(21693) ALERT:  [main.c:739]: handle_sigs(): child process 21757
>> exited by a signal 11
>>  0(21693) ALERT:  [main.c:742]: handle_sigs(): core was not
>> generated
>>  0(21693) INFO:  [main.c:754]: handle_sigs(): terminating due to
>> SIGCHLD
>>  0(21693) DEBUG:  [main.c:756]: handle_sigs(): terminating due to
>> SIGCHLD
>> 69(21816) INFO:  [main.c:809]: sig_usr(): signal 15 received
>> .
>> .
>> .
>>
>>
>> Thank you
>>
>> Best Regards
>> José Seabra
>>
>>
>> 2016-04-25 13:27 GMT+01:00 Jason Penton < <jason.pen...@smilecoms.com>
>> jason.pen...@smilecoms.com>:
>>
>>> Hi José,
>>>
>>> Unfortunately you have to use the ims_usrloc_pcscf as there are extra
>>> extra data fields that are required in the case of IMS registrations.
>>> Perhaps what you can do is run with both usrloc backends. I know that we
>>> made the restriction that you could only use one but I as soon as I get a
>>> chance I will see if it's possible for ims modules to bind specifically to
>>> the ims_usrloc_* module as well as allow you to run "other" code that bind
>>> to other usrloc backends.
>>>
>>> Cheers
>>> Jason
>>>
>>> On Sun, Apr 24, 2016 at 11:30 PM, José Seabra < <joseseab...@gmail.com>
>>> joseseab...@gmail.com> wrote:
>>>
>>>> Hi all,
>>>> Once again, thank you all for the Help.
>>>>
>>>> I have one last question, can I use the function Rx_AAR_Register
>>>> without save the  usr location information on ims_usrloc_pcscf? that
>>>> is because  I'm already using the usrloc module with dmq_usrloc.
>>>>
>>>> I know that ims_usrloc_pcscf is a dependency of ims_qos, but the doubt
>>>> here is if I don't use the ims_registrar_pcscf, the usrloc_pcscf won't
>>>> be used to store usr location? And the ims_qos will works correctly?
>>>>
>>>> BR
>>>> José Seabra
>>>>
>>>>
>>>> 2016-04-22 23:46 GMT+01:00 Ivailo Dobrev < <ivai...@telera.eu>
>>>> ivai...@telera.eu>:
>>>>
>>>>> Hi Jason,
>>>>>
>>>>> It is always better when code "guru" shares his opinion :)
>>>>>
>>>>> Cheers gents !
>>>>>
>>>>>
>>>>>
>>>>> On 04/23/2016 01:35 AM, Jason Penton wrote:
>>>>>
>>>>> Hi gents,
>>>>>
>>>>> we do not support the preliminary service information. So for now you
>>>>> can only call Rx_AAR when you have SDP in the replies. So for VoLTE
>>>>> (preconditions), for example you can call on 183 SP whilst using plain SIP
>>>>> you will have to call on the first reply you get that has SDP (either 
>>>>> 183SP
>>>>> or 200OK).
>>>>>
>>>>> HTH
>>>>>
>>>>> Cheers
>>>>> Jason
>>>>>
>>>>> On Fri, Apr 22, 2016 at 11:11 PM, Ivailo Dobrev < <ivai...@telera.eu>
>>>>> ivai...@telera.eu> wrote:
>>>>>
>>>>>> Yes you send both direction media information to the PCRF but when
>>>>>> reply is received in precondition state.
>>>>>>
>>>>>>
>>>>>> On 04/23/2016 12:03 AM, José Seabra wrote:
>>>>>>
>>>>>> Hello Ivailo and Franz,
>>>>>>
>>>>>> Thank you for your clarifications.
>>>>>>
>>>>>> Well sending an AAR when receive a reply makes all sense, but ims_qos
>>>>>> must send the SDP information from the Initial Invite and also from 183
>>>>>> ringing or 200Ok,  Am I correct?
>>>>>>
>>>>>> Because PCRF needs to know the session parameters from Initial
>>>>>> Initial INVITE a

Re: [SR-Users] Kamailio IMS_QOS

[Jason Penton]

Hi José,

Unfortunately you have to use the ims_usrloc_pcscf as there are extra extra
data fields that are required in the case of IMS registrations. Perhaps
what you can do is run with both usrloc backends. I know that we made the
restriction that you could only use one but I as soon as I get a chance I
will see if it's possible for ims modules to bind specifically to the
ims_usrloc_* module as well as allow you to run "other" code that bind to
other usrloc backends.

Cheers
Jason

On Sun, Apr 24, 2016 at 11:30 PM, José Seabra <joseseab...@gmail.com> wrote:

> Hi all,
> Once again, thank you all for the Help.
>
> I have one last question, can I use the function Rx_AAR_Register without
> save the  usr location information on ims_usrloc_pcscf? that is because
>  I'm already using the usrloc module with dmq_usrloc.
>
> I know that ims_usrloc_pcscf is a dependency of ims_qos, but the doubt
> here is if I don't use the ims_registrar_pcscf, the usrloc_pcscf won't be
> used to store usr location? And the ims_qos will works correctly?
>
> BR
> José Seabra
>
>
> 2016-04-22 23:46 GMT+01:00 Ivailo Dobrev <ivai...@telera.eu>:
>
>> Hi Jason,
>>
>> It is always better when code "guru" shares his opinion :)
>>
>> Cheers gents !
>>
>>
>>
>> On 04/23/2016 01:35 AM, Jason Penton wrote:
>>
>> Hi gents,
>>
>> we do not support the preliminary service information. So for now you can
>> only call Rx_AAR when you have SDP in the replies. So for VoLTE
>> (preconditions), for example you can call on 183 SP whilst using plain SIP
>> you will have to call on the first reply you get that has SDP (either 183SP
>> or 200OK).
>>
>> HTH
>>
>> Cheers
>> Jason
>>
>> On Fri, Apr 22, 2016 at 11:11 PM, Ivailo Dobrev <ivai...@telera.eu>
>> wrote:
>>
>>> Yes you send both direction media information to the PCRF but when reply
>>> is received in precondition state.
>>>
>>>
>>> On 04/23/2016 12:03 AM, José Seabra wrote:
>>>
>>> Hello Ivailo and Franz,
>>>
>>> Thank you for your clarifications.
>>>
>>> Well sending an AAR when receive a reply makes all sense, but ims_qos
>>> must send the SDP information from the Initial Invite and also from 183
>>> ringing or 200Ok,  Am I correct?
>>>
>>> Because PCRF needs to know the session parameters from Initial Initial
>>> INVITE and the reply to it.
>>>
>>> The PCRF is a proprietary solution.
>>>
>>> Thank you
>>> BR
>>> José Seabra
>>>
>>>
>>> 2016-04-22 21:54 GMT+01:00 Ivailo Dobrev < <ivai...@telera.eu>
>>> ivai...@telera.eu>:
>>>
>>>> Hi Franz,
>>>>
>>>> There no real OS PCRF. Yota/Telexir use to had some free VM image that
>>>> is OK for test. You can search about FreePCRF. It is a little tricky to
>>>> configure it but ... I made for my tests a really dummy one based on
>>>> FreeDIAMETER. Generally speaking PCRF is the "brain" of the network and you
>>>> should understand and design things well there. I have experience also w/
>>>> commercial PCRFs and there is no real answer yes this is a right way of
>>>> making something.
>>>>
>>>> Cheers,
>>>>
>>>> Ivo
>>>>
>>>>
>>>> On 04/22/2016 11:09 PM, Franz Edler wrote:
>>>>
>>>> Hi José,
>>>>
>>>>
>>>>
>>>> in principle it is possible to send an AAR after receiving the request.
>>>> In this case the Service-Info-Status AVP is set to PRELIMINARY SERVICE
>>>> INFORMATION.
>>>>
>>>> More efficient is it to wait until SDP answer is received and then the
>>>> Service-Info-Status AVP is set to FINAL_SERVICE_INFORMATION.
>>>>
>>>>
>>>>
>>>> I don’t know if both methods are covered in ims_qos module.
>>>>
>>>>
>>>>
>>>> BTW: which PCRF are you using? Is there some open source PCRF available?
>>>>
>>>>
>>>>
>>>> BR
>>>>
>>>> Franz
>>>>
>>>>
>>>>
>>>> *From:* sr-users [ <sr-users-boun...@lists.sip-router.org>
>>>> mailto:sr-users-boun...@lists.sip-router.org
>>>> <sr-users-boun...@lists.sip-router.org>] *On Behalf Of *José Seabra
>>>> *Sent:* Friday, April 22, 2016 3:58 PM
>>>> *To:* Kamailio (SER) - Users Mailing List
>>>> <sr-users@lists.sip-router.org><sr-users@lists.sip-router.org>
>>>> <sr-users@lists.sip-router.org>
>>>> *Subject:* [SR-Users] Kamailio IMS_QOS
>>>>
>>>>
>>>>
>>>> Hello There,
>>>>
>>>> I'm trying using the ims_qos module with PCRF for QOS, but I'm facing
>>>> some issues.
>>>>
>>>> When kamailio receives an initial invite (originator), it will execute
>>>> the function - "Rx_AAR("ORIG_SESSION_AAR","orig","",-1)", but the PCRF is
>>>> not contacted and i see the following messages:
>>>>
>>>>  5(12153) DEBUG: 

Re: [SR-Users] Kamailio IMS_QOS

[Jason Penton]

Hi gents,

we do not support the preliminary service information. So for now you can
only call Rx_AAR when you have SDP in the replies. So for VoLTE
(preconditions), for example you can call on 183 SP whilst using plain SIP
you will have to call on the first reply you get that has SDP (either 183SP
or 200OK).

HTH

Cheers
Jason

On Fri, Apr 22, 2016 at 11:11 PM, Ivailo Dobrev  wrote:

> Yes you send both direction media information to the PCRF but when reply
> is received in precondition state.
>
>
> On 04/23/2016 12:03 AM, José Seabra wrote:
>
> Hello Ivailo and Franz,
>
> Thank you for your clarifications.
>
> Well sending an AAR when receive a reply makes all sense, but ims_qos must
> send the SDP information from the Initial Invite and also from 183 ringing
> or 200Ok,  Am I correct?
>
> Because PCRF needs to know the session parameters from Initial Initial
> INVITE and the reply to it.
>
> The PCRF is a proprietary solution.
>
> Thank you
> BR
> José Seabra
>
>
> 2016-04-22 21:54 GMT+01:00 Ivailo Dobrev :
>
>> Hi Franz,
>>
>> There no real OS PCRF. Yota/Telexir use to had some free VM image that is
>> OK for test. You can search about FreePCRF. It is a little tricky to
>> configure it but ... I made for my tests a really dummy one based on
>> FreeDIAMETER. Generally speaking PCRF is the "brain" of the network and you
>> should understand and design things well there. I have experience also w/
>> commercial PCRFs and there is no real answer yes this is a right way of
>> making something.
>>
>> Cheers,
>>
>> Ivo
>>
>>
>> On 04/22/2016 11:09 PM, Franz Edler wrote:
>>
>> Hi José,
>>
>>
>>
>> in principle it is possible to send an AAR after receiving the request.
>> In this case the Service-Info-Status AVP is set to PRELIMINARY SERVICE
>> INFORMATION.
>>
>> More efficient is it to wait until SDP answer is received and then the
>> Service-Info-Status AVP is set to FINAL_SERVICE_INFORMATION.
>>
>>
>>
>> I don’t know if both methods are covered in ims_qos module.
>>
>>
>>
>> BTW: which PCRF are you using? Is there some open source PCRF available?
>>
>>
>>
>> BR
>>
>> Franz
>>
>>
>>
>> *From:* sr-users [ 
>> mailto:sr-users-boun...@lists.sip-router.org
>> ] *On Behalf Of *José Seabra
>> *Sent:* Friday, April 22, 2016 3:58 PM
>> *To:* Kamailio (SER) - Users Mailing List 
>> 
>> *Subject:* [SR-Users] Kamailio IMS_QOS
>>
>>
>>
>> Hello There,
>>
>> I'm trying using the ims_qos module with PCRF for QOS, but I'm facing
>> some issues.
>>
>> When kamailio receives an initial invite (originator), it will execute
>> the function - "Rx_AAR("ORIG_SESSION_AAR","orig","",-1)", but the PCRF is
>> not contacted and i see the following messages:
>>
>>  5(12153) DEBUG: 

Re: [SR-Users] Kamailio 5.0 - HTTP loading of config files

[Jason Penton]

We use svn to manage the cfgs. The prod instances regularly update svn.
On 02 Mar 2016 7:39 PM, "Alex Balashov"  wrote:

> On 03/02/2016 12:38 PM, Daniel Tryba wrote:
>
> This problem has been solved by the many configuration management tools
>> readily available.
>>
>
> +1, from my vantage point.
>
> --
> Alex Balashov | Principal | Evariste Systems LLC
> 303 Perimeter Center North, Suite 300
> Atlanta, GA 30346
> United States
>
> Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct)
> Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

[SR-Users] Kamailio SST and Dialog module workings

[Jason Penton]

Hi Kamailio users and Devs.

I am interested to know if any of you are using SST module with DIALOG
module and sharing the timeout avp between the two - expecting the call to
be torn down if no in-dialog requests are processed. If you are using it,
is it working as you expect?

To me it seems that the timers in the dialog module will never be updated
by any in-dialog requests. I just wanted to check before I start looking at
fixing... perhaps I am missing something.

Cheers
Jason
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] [sr-dev] Kamailio SST and Dialog module workings

[Jason Penton]

Hey Daniel,

According to the docs and the code sst updates the avp configured for
timeout / lifetime in dialog module So it is then broken. I'll look
into it.

Cheers
Jason
On 10 Feb 2016 18:25, "Daniel-Constantin Mierla" <mico...@gmail.com> wrote:

> Hello,
>
> afaik, the dialog and sst modules are independent. The sst module is about
> adding headers so the endpoint does session timer refreshing, useful for
> example when the callee support session timers (e.g., a gateway), but the
> caller does not support requesting it. At least that was the initial goal,
> quite some many years ago ...
>
> Cheers,
> Daniel
>
> On 10/02/16 16:56, Jason Penton wrote:
>
> Hi Kamailio users and Devs.
>
> I am interested to know if any of you are using SST module with DIALOG
> module and sharing the timeout avp between the two - expecting the call to
> be torn down if no in-dialog requests are processed. If you are using it,
> is it working as you expect?
>
> To me it seems that the timers in the dialog module will never be updated
> by any in-dialog requests. I just wanted to check before I start looking at
> fixing... perhaps I am missing something.
>
> Cheers
> Jason
>
>
>
>
> ___
> sr-dev mailing 
> listsr-...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
> --
> Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - 
> http://www.linkedin.com/in/miconda
> Book: SIP Routing With Kamailio - http://www.asipto.comhttp://miconda.eu
>
>
> ___
> sr-dev mailing list
> sr-...@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Registration Failure - IMS

[Jason Penton]

Hi Cristina,

Unfortunately IPSEC is not supported 100% on the P-CSCF at this time. There
are pieces of code that exist for it but it is not something we focused on
yet. Perhaps some of the other devs will get to it when they get the need
or some spare time

Cheers
Jason

On Thu, Feb 4, 2016 at 7:42 PM, Daniel-Constantin Mierla <mico...@gmail.com>
wrote:

> Hello,
>
> maybe some other IMS guys are able to help more, but in general the
> authentication in handled in the configuration file of Kamailio by calling
> various auth functions. You have to spot where those are used and why is
> responding with 401. Eventually run it with debug=3 in kamailio.cfg to get
> more verbosity of what it is done in the code.
>
> Also, it may help to check the emails from Franz Edler during January and
> February on this list, he provided configs and many details about building
> a prototype IMS platform. See next link and follow up discussion:
>
>   -
> http://lists.sip-router.org/pipermail/sr-users/2016-January/091204.html
>
> Cheers,
> Daniel
>
> On 03/02/16 11:58, Cristina Caridi wrote:
>
> Hello,
>
> I'm a new starter of Kamailio (SER). I am using the version 4.4.0-dev6 in
> a Debian machine.
> I've configured all the IMS network elements, the FHoSS and also Boghe
> IMS/RCS client in a Windows machine.
>
> When an IMS user belonging to my network tries to register and IP SEC
> mechanism is enabled, the registration flow stops at 401 Unauthorized from
> S-CSCF -> I-CSCF -> P-CSCF -> client.
> The problem is that the HSS in MAA message does not send the
> SIP-Auth-Data-item that should be cointain the Confidentiality Key and the
> Integrity Key; so the client is not able to challenge the S-CSCF sending
> another REGISTER message.
>
> Do you have any suggestions about this? When IP SEC is disabled (by
> managing client options), the registration works well.
> Maybe is there any configuration at HSS level that i'm not considering?
>
> Thank you in advance for your help,
> Cristina
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing 
> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - 
> http://www.linkedin.com/in/miconda
> Book: SIP Routing With Kamailio - http://www.asipto.comhttp://miconda.eu
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*
*Mobile:* +27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] P-CSCF

[Jason Penton]

Hi Fred,

I can answer the 1st question only as I am not too clued up with mediaproxy
module and server.

The pcscf_is_registered function is used to confirm that the UE you are
sending the request from is actually registered to the IMS. If this is
true, then the P-CSCF will assert the identity and forward the request to
I-CSCF or S-CSCF, depending on state and request type. Normally the
interface between UE and P-CSCF is via ipsec so it's almost a given that
any traffic coming in on the ipsec pipe can be asserted. In the case
without IPSEC however, there are various methods used to make sure the UE
that is sending the request is actually registered to the IMS. There are a
few algorithms that can be configured to check - ie you can check the
contact host and port (this is only works for invites as MESSAGEs don't
have contact headers generally), then you can check the received IP and
port to make sure it's coming from a currently registered contact that used
the same IP:PORT combination, etc, etc.

Alternatively you could remove the check and pass the request onto the
S-CSCF without asserting (not per std though) and then challenge all "cost
incurring" requests with a 407 on the S-CSCF One limitatoin of not
getting this working correctly is that you will not be able to use the Rx
interface unless you can match a contact on the P-CSCF (ims_qos module)
but perhaps you are not interested in Rx interface at the moment?

If you send me a trace (pcap) and logfile I'll take a look as soon as I get
a chance and let you know what the problem is.

Cheers
Jason

On Thu, Jan 28, 2016 at 9:24 PM, Fred Schulz <fsch...@blackned.de> wrote:

> Hi all,
>
> we’re just playing around with an IMS setup bases on kamailio. Therefore
> the kamailio is used as P-,I- and S-CSCF.
> We where able to register two clients through all components.
> As we wan to start a call session, the P-CSCF answers with „403 -
> Forbidden. You must register with an S-CSCF“…
>
> I found this snippet in kamailio.cfg:
>
> if (!pcscf_is_registered("location")) { send_reply("403","Forbidden - You
> must register first with a S-CSCF“); break; }
>
> Can one tell me what exactly the kamailio is checking there? As I figured
> out it is looking in database location table.
>
> The table contains the registered users registered towards the IMS.
>
> Another „problem“ we faced with is the rtpproxy. As the
> ngcp-mediaproxy-ng is no longer available and replaced with rtpproxy
> we’re trying to use it. But kamailio said that the proxy isn’t answering
> the way expected.
>
> ERROR: rtpengine [rtpengine.c:1622]: rtpp_test(): proxy responded with
> invalid response
>
> Any advise would be nice.
>
> Thank you
> Fred
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 

*Jason Penton*
*Senior Manager: Applications and Services*
*Smile Communications Pty (Ltd)*
*Mobile:* +27 (0) 83 283 7000
*Skype:* jason.barry.penton
jason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio-IMS icscf erro

[Jason Penton]

you don't have the mysql modules compiled/installed - check your log file
for "ERROR"

0(4133) ERROR:  [sr_module.c:565]: load_module(): could not find
module  in 
 0(4133) :  [cfg.y:3432]: yyerror_at(): parse error in config file
/etc/kamailio/kamailio.cfg, line 114, column 12-21: failed to load module

On Tue, Jan 5, 2016 at 3:32 AM, Kranti Kumar <krantikum...@gmail.com> wrote:

> Thank you very much and please find the attached log file for the same.
>
> Regards,
> -kranti
>
> On Sun, Jan 3, 2016 at 12:40 PM, Thierry Luo <lang...@yeah.net> wrote:
>
>> Maybe you can enable DEBUG mode to output some error details for
>> reference by changing the following line in icscf.cfg
>>
>>##!define WITH_DEBUG
>>
>> To:
>>
>>#!define WITH_DEBUG
>>
>>
>>
>> Thierry
>>
>>
>>
>> *From:* sr-users-boun...@lists.sip-router.org [mailto:
>> sr-users-boun...@lists.sip-router.org] *On Behalf Of *Kranti Kumar
>> *Sent:* Wednesday, December 30, 2015 02:05
>> *To:* Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org>
>> *Subject:* [SR-Users] Kamailio-IMS icscf erro
>>
>>
>>
>> Hi,
>>
>>
>>
>> We are using attached two configuration file to start icscf node.
>>
>>
>>
>> But while we run "kamailio start"  command getting below errors.
>>
>>
>>
>> loading modules under config path:
>> /usr/lib/i386-linux-gnu/kamailio/modules/
>>
>> ERROR: bad config file (1 errors)
>>
>> Segmentation fault
>>
>>
>>
>> Can anyone help me here to resolve this issue.
>>
>>
>>
>> Regards,
>>
>> -kranti
>>
>> [image: 提示图标]邮件带有附件预览链接，若您转发或回复此邮件时不希望对方预览附件，建议您手动删除链接。
>>
>> 共有 *2* 个附件
>>
>> *kamailio.cfg.txt*(17K)
>>
>> 极速下载
>> <http://preview.mail.yeah.net/xdownload?filename=kamailio.cfg.txt=1tbiGA7gBFXMT8KYUQAAsv=3=192300c0a2e4b6c09dc76eb140fe54a1=1451549902=langsir%40yeah.net>
>> 在线预览
>> <http://preview.mail.yeah.net/preview?mid=1tbiGA7gBFXMT8KYUQAAsv=3=192300c0a2e4b6c09dc76eb140fe54a1=1451549902=langsir%40yeah.net>
>>
>> *ICSCF.cfg.txt*(2K)
>>
>> 极速下载
>> <http://preview.mail.yeah.net/xdownload?filename=ICSCF.cfg.txt=1tbiGA7gBFXMT8KYUQAAsv=4=192300c0a2e4b6c09dc76eb140fe54a1=1451549902=langsir%40yeah.net>
>> 在线预览
>> <http://preview.mail.yeah.net/preview?mid=1tbiGA7gBFXMT8KYUQAAsv=4=192300c0a2e4b6c09dc76eb140fe54a1=1451549902=langsir%40yeah.net>
>>
>> ___
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] [sr-dev] RFC: Renaming dialog_ng to ims_dialog

[Jason Penton]

Agreed
On 16 Dec 2015 10:36 AM, "Carsten Bock"  wrote:

> Hi,
>
> I agree, if the dialog_ng module is only used with IMS deployments, it
> may be confusing that it's called dialog_ng (despite the original
> ideas/thoughts, Richard mentioned).
> I have no objections renaming it to ims_dialog; if we manage to merge
> it at some point with the existing dialog-module and make the
> functionality more generic, we can rename it back to dialog_ng or
> similar later.
>
> Thanks,
> Carsten
>
> 2015-12-15 20:50 GMT+01:00 Richard Good :
> > Hi Daniel
> >
> > As you mentioned the original reason for this module was not IMS but
> rather
> > to support some new features,  in particular forking.  It is not
> > particularly specific to IMS.
> >
> > Unfortunately we have not managed to merge with the normal dialog module
> as
> > we had originally intended.
> >
> > I do hope at some point we manage to merge the two modules so each can
> > benefit for the others fixes but think it will be quite an endeavour.
> >
> > Having said this I have no issue with renaming the module or explicitly
> > explaining in the documentation if it is causing any confusion.
> >
> > Let's see if the other IMS devs agree.
> >
> > Regards
> > Richard.
> >
> > On 15 Dec 2015 2:52 PM, "Daniel-Constantin Mierla" 
> > wrote:
> >>
> >> Hello,
> >>
> >> I am under the impression that the name dialog_ng creates confusion out
> >> there and some people are using it instead of the classic dialog module.
> >>
> >> Although it was started with goals of reworking dialog module with a
> >> different concept (which was discussed mainly by some guys that
> >> afterwards changed their job to non-voip area), dialog_ng ended up to be
> >> tailored for IMS needs.
> >>
> >> Probably we should do that refactoring of the dialog module, but
> >> meanwhile dialog_ng doesn't refect that and some people are confused by
> >> the current naming of the two modules.
> >>
> >> Practically is more about convenience at this moment and if IMS
> >> developers and users think it is not going to be a big overhead for
> >> their deployments to be upgraded, I can take care to rename it. So,
> >> while general opinion matters, I think we should see first what IMS devs
> >> prefer.
> >>
> >> I am personally not affected that much, so I am fine to keep it like it
> >> is now -- in that case, proper notes should be added to documentation,
> >> stating that dialog_ng must be used only for IMS (or when the config
> >> writer knows very well what she/he is doing).
> >>
> >> Cheers,
> >> Daniel
> >>
> >> --
> >> Daniel-Constantin Mierla
> >> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
> >> Book: SIP Routing With Kamailio - http://www.asipto.com
> >> http://miconda.eu
> >>
> >>
> >> ___
> >> sr-dev mailing list
> >> sr-...@lists.sip-router.org
> >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
> >
> >
> > This email is subject to the disclaimer of Smile Communications at
> > http://www.smilecoms.com/home/email-disclaimer/
> >
> >
> > ___
> > sr-dev mailing list
> > sr-...@lists.sip-router.org
> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
> >
>
>
>
> --
> Carsten Bock
> CEO (Geschäftsführer)
>
> ng-voice GmbH
> Schomburgstr. 80
> D-22767 Hamburg / Germany
>
> http://www.ng-voice.com
> mailto:cars...@ng-voice.com
>
> Office +49 40 5247593-0
> Fax +49 40 5247593-99
>
> Sitz der Gesellschaft: Hamburg
> Registergericht: Amtsgericht Hamburg, HRB 120189
> Geschäftsführer: Carsten Bock
> Ust-ID: DE279344284
>
> Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
> http://www.ng-voice.com/imprint/
>
> ___
> sr-dev mailing list
> sr-...@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio IMS: Contact validation during INVITE

[Jason Penton]

Hi Prashant,

The P-CSCF errs on the side of finding a contact. So, if you send me the
logs I am pretty sure that because the contact is not found (it's
impossible to be found), then P-CSCF tries to find the contact based on src
IP and Port. What we can do however, is put in a limitation that if the
contact header does exist (will always be in INVITE), then the P-CSCF must
not fallback to use other methods to find the contact

Does this make sense?

Cheers
Jason

On Wed, Nov 25, 2015 at 12:06 PM, Prashant Desai <pdesa...@gmail.com> wrote:

> Hi Jason,
>
> Please ignore the last mail.
>
> Thanks for your reply, we are facing an issue in following usecase where
> UE will use a different contact as shown below in INVITE.
>
> UE
> ---REGISTER->PCSCF
> [src ip:127.0.0.1:8008]
> Contact:sip:userA@127.0.0.1:8008 <http://Contact:sip:user@127.0.0.1:8008>
>
>
>
> UE
> ---INVITE->PCSCF
> [src ip:127.0.0.1:8008]
> Contact:sip:userB@127.0.0.1:9000 <http://Contact:sip:user@127.0.0.1:8008>
>
>
> In the above scenario kamailio PCSCF is treating the UE as registered,even
> though the contact is different in INVITE and call will be successful.
>
> why are we not validating the contact URI in the INVITE?is it not a
> mandatory to validate?if yes,any spec references?
>
> Regards,
> Prashant
>
> On Wed, Nov 25, 2015 at 3:26 PM, Prashant Desai <pdesa...@gmail.com>
> wrote:
>
>> Hi Jason,
>>
>> Thanks for your reply, we are facing an issue in following usecase.
>>
>> UE
>> -------->PCSCF
>> REGISTER
>> [src ip:127.0.0.1:8008]
>> Contact:sip:user@127.0.0.1:8008
>>
>>
>> On Tue, Nov 24, 2015 at 5:41 PM, Jason Penton <jason.pen...@smilecoms.com
>> > wrote:
>>
>>> Hi Prashant,
>>>
>>> Often the P-CSCF has to know about the contact (for example for Rx QoS,
>>> security (asserting identity, etc). It is also possible that a contact
>>> header is not provided by the UE so you have no alternative but to search
>>> src info, via info, etc. So that is the main  reason.
>>>
>>> So let me understand your problem a little more. You are saying the
>>> contact with the wrong state is being 'found'? If this is the case, there
>>> is a reslution we have in our code base that will get into master later
>>> this week? If not, please can you explain the problem you are having in
>>> more detail.
>>>
>>> Cheers
>>> Jason
>>>
>>> On Tue, Nov 24, 2015 at 1:22 PM, Daniel-Constantin Mierla <
>>> mico...@gmail.com> wrote:
>>>
>>>> Hello,
>>>>
>>>> updated the subject of the email to reflect it refers to IMS
>>>> extensions, which are different than the standard IETF registrars.
>>>>
>>>> That makes it easier to be spotted by the people using IMS and the dev
>>>> guys can shed some light on why the implemented that way.
>>>>
>>>> Cheers,
>>>> Daniel
>>>>
>>>> On 24/11/15 11:59, Prashant Desai wrote:
>>>>
>>>> Hi,
>>>>
>>>>
>>>>
>>>>   We observe that the following kamailio API is trying to find out user
>>>> registration by comparing source IP and port with stored contact, if it
>>>> fails, then it compares based on incoming SIP msg contact uri.
>>>>
>>>>
>>>>
>>>> is_registered(struct sip_msg* _m, udomain_t* _d){
>>>>
>>>>getContactP(_m,_d);
>>>>
>>>> }
>>>>
>>>>
>>>>
>>>> pcontact_t * getContactP(struct sip_msg* _m, udomain_t* _d) {);
>>>>
>>>>  //Getting pcontact from
>>>> source IP and port
>>>>
>>>>  if
>>>> (ul.get_pcontact_by_src(_d, _host, _m->rcv.src_port,
>>>> _m->rcv.proto, ) == 1) {
>>>>
>>>> LM_DBG("No
>>>> entry in usrloc for %.*s:%i (Proto %i) found!\n", received_host.len,
>>>> received_host.s, _m->rcv.src_port, _m->rcv.proto);
>>>>
>>>>  }
>>>>
&

Re: [SR-Users] Kamailio IMS: Contact validation during INVITE

[Jason Penton]

Hi Prashant,

Often the P-CSCF has to know about the contact (for example for Rx QoS,
security (asserting identity, etc). It is also possible that a contact
header is not provided by the UE so you have no alternative but to search
src info, via info, etc. So that is the main  reason.

So let me understand your problem a little more. You are saying the contact
with the wrong state is being 'found'? If this is the case, there is a
reslution we have in our code base that will get into master later this
week? If not, please can you explain the problem you are having in more
detail.

Cheers
Jason

On Tue, Nov 24, 2015 at 1:22 PM, Daniel-Constantin Mierla <mico...@gmail.com
> wrote:

> Hello,
>
> updated the subject of the email to reflect it refers to IMS extensions,
> which are different than the standard IETF registrars.
>
> That makes it easier to be spotted by the people using IMS and the dev
> guys can shed some light on why the implemented that way.
>
> Cheers,
> Daniel
>
> On 24/11/15 11:59, Prashant Desai wrote:
>
> Hi,
>
>
>
>   We observe that the following kamailio API is trying to find out user
> registration by comparing source IP and port with stored contact, if it
> fails, then it compares based on incoming SIP msg contact uri.
>
>
>
> is_registered(struct sip_msg* _m, udomain_t* _d){
>
>getContactP(_m,_d);
>
> }
>
>
>
> pcontact_t * getContactP(struct sip_msg* _m, udomain_t* _d) {);
>
>  //Getting pcontact from
> source IP and port
>
>  if
> (ul.get_pcontact_by_src(_d, _host, _m->rcv.src_port,
> _m->rcv.proto, ) == 1) {
>
> LM_DBG("No
> entry in usrloc for %.*s:%i (Proto %i) found!\n", received_host.len,
> received_host.s, _m->rcv.src_port, _m->rcv.proto);
>
>  }
>
>   if (c == NULL) {
>
>  //Getting pcontact from
> contact uri.
>
> if (ul.get_pcontact(_d, >uri, ) == 0) {
>
>
>
>  }
>
>   }
>
> We have use case where INVITE message is from same source IP and port but
> having unregistered contact.With this scenario,is_registered() will return
> success.
>
> We would like to know reason behind comparing the source IP and port to
> fetch the pcontact?
>
>
>
> Regards,
>
> Prashant
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing 
> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - 
> http://www.linkedin.com/in/miconda
> Book: SIP Routing With Kamailio - http://www.asipto.com
> Kamailio Advanced Training, Nov 30-Dec 2, Berlin - http://asipto.com/kat
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] RES: Kamailio IMS - VM

[Jason Penton]

What errors are you getting? Perhaps we can assist you. There is no pre
configured vm at the moment
On 17 Nov 2015 8:38 am, "krantikumara"  wrote:

> Hi Carsten,
>
> I am very newbie to install OpenIMs and Kamailio. I am getting so many
> errors. Could you please share any VM image is available with you.
>
> Thank you so much in advance.
>
> Regards,
> -kranti
>
>
>
> --
> View this message in context:
> http://sip-router.1086192.n5.nabble.com/Kamailio-IMS-VM-tp123396p143114.html
> Sent from the Users mailing list archive at Nabble.com.
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] how to use data received from diameter answer(CCA) in kamailio config script

[Jason Penton]

Carsten is correct, but I think he meant ims_charging module

Cheers
Jason

On Fri, Oct 2, 2015 at 10:09 AM, Carsten Bock <cars...@ng-voice.com> wrote:

> Hi Suresh,
>
> at the moment, there is no native way to retrieve this information
> from script. If you want to retrieve additional information from the
> CCA, you will have to implement that into the diameter_charging
> module, which would result in a custom implementation.
>
> Thanks,
> Carsten
>
> 2015-10-01 16:03 GMT+02:00 SureshTummala <tsures...@yahoo.co.in>:
> > Hi,
> >
> > I want retrieve the data present in the Credit-Control-Answer response
> from
> > diameter in kamailio configuration script. Is there any provision in
> > kamailio 4.1.x (or) later?
> >
> > Any suggestions are appreciated.
> >
> >  Regards,
> > Suresh Tummala
> >
> > ___
> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> > sr-users@lists.sip-router.org
> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> >
>
>
>
> --
> Carsten Bock
> CEO (Geschäftsführer)
>
> ng-voice GmbH
> Schomburgstr. 80
> D-22767 Hamburg / Germany
>
> http://www.ng-voice.com
> mailto:cars...@ng-voice.com
>
> Office +49 40 5247593-0
> Fax +49 40 5247593-99
>
> Sitz der Gesellschaft: Hamburg
> Registergericht: Amtsgericht Hamburg, HRB 120189
> Geschäftsführer: Carsten Bock
> Ust-ID: DE279344284
>
> Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
> http://www.ng-voice.com/imprint/
>
> _______
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>



-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
<http://www.smilecoms.com/disclaimer>

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Ims Kamailio issue - 403 Forbidden - You must register first with a S-CSCF

[Jason Penton]

Hi Victor,

For the first problem, are you behind a nat?

Secondly, the 2 contacts coming back in the 200OK will be because you still
have an old binding in the scscf

I can't really help much without a log file.

Cheers
Jason

On Fri, Aug 21, 2015 at 4:42 PM, Victor Huertas Garcia vhuer...@hotmail.com
 wrote:

 Hello everybody,

 I have installed an IMS core using Kamailio and FHoSS.
 In this environment, I am able to successfully register Bob and Alice with
 the same S-CSCF.
 However, when I try to make a voice call between Bob and Alice it is not
 established.

 The code received is 403 Forbidden - You must register first with a
 S-CSCF. This code is generated by the P-CSCF because the Contact Header
 that is checked against the database (location table) it is not found.

 When I look up manually the location MySQL table, there are two things
 that surprise me:

 - The Contact header (AOR column content) that is included in the INVITE
 Requet URI when entering in the P-CSCF is present in the table. So why the
 pcscf_is_registered (location) returns false?

 - When Bob registers two Contacts are stored, the first one is the one
 included in the REGISTER message generated from  Bob IMS Client. However,
 the second Contact is the one present in the 200 OK message (coming from
 the S-CSCF) which is different from the one present in the REGISTER (the
 only thing different is the UDP port). Why the S-CSCF (with the default
 kamailio.cfg) doesn't the Contact header and changes the UDP port? Is this
 the standard behaviour? I don't think so...

 Thanks for your attention

 Regards,

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] DIAMETER based on TCP requires a FIXED I/S-CSCFSOURCE PORT in order to make Cx work towards a External HSS

[Jason Penton]

Hi Jan,

This is not supported but I have a question, what happens if you want to
connect to multiple HSSs? Say for load balancing or failover (assuming no
DRA)? Fixing the source port seems pretty restrictive to me ;)

Cheers
Jason

On Mon, Jul 6, 2015 at 12:13 PM, Jan Devai jan.de...@gmail.com wrote:


 Hi experts,


 from the current trace we can see that the I/S-CSCF always changes SOURCE
 port when contacting our eternal HSS.

 In order to make the Cx work HSS expects the Source port to be fixed on
 the TCP layer and in our I/S-CSCF configuration we did not find any setting
 for SOURCE Port.


 Can somebody help us please ;-) ?


 We appreciate your support,


 Br,
 Jan

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Ims_charging lose all charging information when restart

[Jason Penton]

Hi Yasin,

The functionality of reviving Ro sessions on reboot is not yet 100%
complete. As you correctly noted, the groundwork is there w.r.t data being
stored in DB but I still need to rebuild the CDP sessions and restart the
structures, state and timing for the Ro sessions. It's something on my todo
list. Your next question will probably be ETA... ;) - Ideally I'd like to
have this implemented before the end of this month.

Cheers
Jason

On Tue, May 12, 2015 at 10:03 AM, Yasin CANER yasin.ca...@netgsm.com.tr
wrote:

  Hello;
 as you know , S-CSCSF has IMS_charging module and dialog_ng module for
 charging. When it is restarted , all dialog_ng hash is vanish. So  calls
 can continue but* charging stops*.
 if dialog_ng has a db_mode when restart , it can be solved. or is there a
 way to solve this problem?
 Thanks.


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Ims_charging lose all charging information when restart

[Jason Penton]

Hi Yasin,

I'd imagine this 'should' work already. The dialog will be torn down on the
BUSY, thereby sending a CCR(terminate). Theoretically you could re-arm the
RURI/dst and then call Ro_CCR again before t_relaying

Like I said, I have not tested this so if it doesn't work let us know and
we can try and look at implementing something.

Kind regards
Jason

On Tue, May 12, 2015 at 2:01 PM, ycaner yasin.ca...@netgsm.com.tr wrote:

 Thanks for reply.
 i need to learn one thing? how to handle call forwarding charging in
 IMS_charging. i mean that
 A   CSCF  B C
 |-INV-   |-INV- |   |
 |   |-BUSY- |  |
 |   |-INV- - - -|


 it is really complex.
 Thanks



 --
 View this message in context:
 http://sip-router.1086192.n5.nabble.com/Ims-charging-lose-all-charging-information-when-restart-tp137742p137768.html
 Sent from the Users mailing list archive at Nabble.com.

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] ims_charging module - AVP's

[Jason Penton]

+1 Daniel.

Shane, you are welcome to submit patch as suggested by Daniel. I will have
a look at the spec and what we have impl and get back to you as soon as I
find a gap.

cheers
jason

On Wed, Feb 18, 2015 at 1:16 PM, Daniel-Constantin Mierla mico...@gmail.com
 wrote:

 Hello,

 On 17/02/15 22:52, Shane Harrison wrote:
  Hi IMS'ers
 
  I am generating CCR's happily from the ims_charging module (adapted to
 work standalone with standard userloc module) but have a couple of
 questions around AVP's supported.
 
  a) I note that in the 3GPP TS 32.299 V12.7.0 specification that table
 7.1.0.1, that it indicates Vendor-Id and Vendor-Specific-Application-Id
 aren't used.  But later in section 7.1.16 it indicates that the Vendor-Id
 should be 10415 and set inside the Vendor-Specific-Application-Id AVP.
 Should I assume that the table is wrong ?
  b) The ims_charging_module doesn't seem to put an Auth-Application-Id
 into the CCR.  This is mandatory according to 3GPP and RFC4006.  I note
 that it does appear under the Vendor-Specific-Application-Id - but this
 doesn't seem right to me?
 
  At this stage I am thinking to add the Auth-Application-Id AVP and also
 the 3GPP Called-Party-Address AVP.  To I submit patches to the development
 list?
 
 I am not working with IMS that much, therefore I cannot comment on your
 remarks about the specks.

 Just jumping in to say that the recommended way to submit a patch is a
 pull request via github project:

   - https://github.com/kamailio/kamailio

 It allows the other developers to review and make comments. Also, it
 doesn't get forgotten as it can happen with maling list patches, because
 sometime is higher traffic and some developers can be in vacation or
 traveling.

 If github is not liked by you for what so ever reason, patching to
 mailing list is the alternative.

 Cheers,
 Daniel

 --
 Daniel-Constantin Mierla
 http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
 Kamailio World Conference, May 27-29, 2015
 Berlin, Germany - http://www.kamailioworld.com


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Using dialog_ng

[Jason Penton]

=[//etc/kamailio/kamailio.cfg] l=616 a=25
 n=remove_hf

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[07] c=[//etc/kamailio/kamailio.cfg] l=637 a=16 n=if

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[07] c=[//etc/kamailio/kamailio.cfg] l=619 a=25
 n=is_method

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[07] c=[//etc/kamailio/kamailio.cfg] l=623 a=25
 n=set_dlg_profile

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[07] c=[//etc/kamailio/kamailio.cfg] l=624 a=26
 n=xlog

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[07] c=[//etc/kamailio/kamailio.cfg] l=626 a=63
 n=assign

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[07] c=[//etc/kamailio/kamailio.cfg] l=626 a=30
 n=Ro_CCR

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR:
 ims_charging [mod.c:381]: w_ro_ccr(): Unable to find dialog and cannot do
 Ro charging without it

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[07] c=[//etc/kamailio/kamailio.cfg] l=633 a=16 n=if

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[-2] c=[//etc/kamailio/kamailio.cfg] l=628 a=26
 n=xlog

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR:
 script: CCR Request failure

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[-2] c=[//etc/kamailio/kamailio.cfg] l=633 a=39
 n=setflag

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[-2] c=[//etc/kamailio/kamailio.cfg] l=637 a=5
 n=route

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[SIPOUT] c=[//etc/kamailio/kamailio.cfg] l=1074 a=16
 n=if

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[-2] c=[//etc/kamailio/kamailio.cfg] l=640 a=5
 n=route

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[REGISTRAR] c=[//etc/kamailio/kamailio.cfg] l=876
 a=16 n=if

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[REGISTRAR] c=[//etc/kamailio/kamailio.cfg] l=853
 a=25 n=is_method

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[-2] c=[//etc/kamailio/kamailio.cfg] l=650 a=16 n=if

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[-2] c=[//etc/kamailio/kamailio.cfg] l=650 a=5
 n=route

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[PSTN] c=[//etc/kamailio/kamailio.cfg] l=1090 a=16
 n=if

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[PSTN] c=[//etc/kamailio/kamailio.cfg] l=1081 a=25
 n=xlog

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR:
 script: SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[PSTN] c=[//etc/kamailio/kamailio.cfg] l=1082 a=2
 n=return

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[-2] c=[//etc/kamailio/kamailio.cfg] l=653 a=5
 n=route

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[LOCATION] c=[//etc/kamailio/kamailio.cfg] l=882
 a=63 n=assign

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[LOCATION] c=[//etc/kamailio/kamailio.cfg] l=933
 a=16 n=if

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[LOCATION] c=[//etc/kamailio/kamailio.cfg] l=883
 a=25 n=lookup

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[LOCATION] c=[//etc/kamailio/kamailio.cfg] l=933
 a=16 n=if

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[LOCATION] c=[//etc/kamailio/kamailio.cfg] l=931
 a=25 n=is_method

 Feb  8 21:29:22 hh-rcs-sipproxy3 /usr/sbin/kamailio[11965]: ERROR: ***
 cfgtrace:request_route=[LOCATION] c=[//etc/kamailio/kamailio.cfg] l=932
 a=24 n=record_route

 Feb  8 21:29:22 hh-rcs-sipproxy3 rsyslogd-2177: imuxsock begins to drop
 messages from pid 11965 due to rate-limiting



 *From:* sr-users [mailto:sr-users-boun...@lists.sip-router.org] *On
 Behalf Of *Jason Penton
 *Sent:* Friday, 6 February 2015 7:50 a.m.

 *To:* Kamailio (SER) - Users Mailing List
 *Subject:* Re: [SR-Users] Using dialog_ng



 Shane,



 Just looking at your config I see you have already set the flag. Can you
 perhaps send me a log file and I will take

Re: [SR-Users] Using dialog_ng

[Jason Penton]

Hi Shane,

dialog_ng started as a prototype by us quite a while ago to form the basis
of dialogs in our IMS implementation using Kamailio. We took quite a lot
from the existing dialog module at the time and then built the additional
functionality on top. There were some things (like dlg_manage) that we did
not move across and this is bad so I apologise.

Right now to get a dialog recorded you need to define a flag in the
modparam:
modparam(dialog_ng, dlg_flag, 10)

And then when you want to track a dlg do something like:

if (is_method(INVITE)) {
   setflag(10);
   ...
}

We have had a lot of other work to focus on and haven't spent too much time
on dialog_ng but we will certainly put some effort into making it easier to
use and more complete.

Cheers
Jason

On Thu, Feb 5, 2015 at 8:03 PM, Shane Harrison shane.harri...@imgtec.com
wrote:


 Thanks Daniel - that clarity helps.  Apologies if I should have been able
 to glean that from the docs - I just didn't see it in my reading.  FYI,
 dialog-ng has deprecated the dlg_mange() function.

 Can anybody who has used or involved in writing the dialog-ng module shed
 some light on what the new mechanism is for creating an early dialog
 structure?

 Cheers and thanks
 Shane

 
 From: sr-users [sr-users-boun...@lists.sip-router.org] on behalf of
 Daniel-Constantin Mierla [mico...@gmail.com]
 Sent: 06 February 2015 00:02
 To: Kamailio (SER) - Users Mailing List
 Subject: Re: [SR-Users] Using dialog_ng

 Hello,

 I haven't used the dialog_ng module, but (as expected based on the
 dialog module) if you only set the FLT_DIALOG flag, then the dialog is
 created when calling t_relay(). The dialog module has dlg_manage()
 function which creates the dialog immediately, maybe that's in dialog_ng
 as well.

 Cheers,
 Daniel

 On 04/02/15 05:28, Shane Harrison wrote:
  Hi all,
 
  I think the lack of response to my previous thread is probably because
 it was too complicated.  I have now narrowed my problem down after further
 archive readings .
 
  I am trying to use the dialog_ng module along with the
 ims_charging_module.  Upon reception of an INVITE, a call to the Ro_CCR()
 from the request_route script is made.  That function does a check that the
 dialog record exists (binds to dialog module and does a get_dlg(msg)
 call) - this fails i.e. dialog is not found.
 
  Running kamailio 4.2.2 and relevant sections of kamailio.cfg are:
  modparam(dialog_ng, dlg_flag, FLT_DIALOG)
  modparam(dialog_ng, timeout_avp, $avp(DLG_TIMEOUT_AVP))
  modparam(dialog_ng, detect_spirals, 1)
  modparam(dialog_ng, profiles_no_value, orig ; term)
 
  request_route {
  # NAT detection
  route(NATDETECT);
 
  # Set DLG flag to track dialogs using dialog2
  if (!is_method(REGISTER|SUBSCRIBE))
  setflag(FLT_DIALOG);
 
  # handle requests within SIP dialogs
  route(WITHINDLG);
 
  ### only initial requests (no To tag)
 
  # CANCEL processing
  if (is_method(CANCEL))
  {
  if (t_check_trans())
  t_relay();
  exit;
  }
 
  t_check_trans();
 
  if (is_method(INVITE))
  {
  set_dlg_profile(orig);
 Ro_CCR(CHARGING_CCR_REPLY, orig, SCUR, ,
 30,CCR_location);
 }
 
 
  So my question is, should the above logic create a dialog record on the
 initial INVITE? and if yes then what possible reasons might there be for
 the Ro_CCR() function not be able to detect it exists?
 
  Cheers
  Shane Harrison
 
 
 
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

 --
 Daniel-Constantin Mierla
 http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
 Kamailio World Conference, May 27-29, 2015
 Berlin, Germany - http://www.kamailioworld.com


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users

Re: [SR-Users] Using dialog_ng

[Jason Penton]

Shane,

Just looking at your config I see you have already set the flag. Can you
perhaps send me a log file and I will take a look for you. This is exactly
how we, and others (ng voice) use it in our IMS setups so it should work

Cheers
Jason

On Thu, Feb 5, 2015 at 8:48 PM, Jason Penton jason.pen...@smilecoms.com
wrote:

 Hi Shane,

 dialog_ng started as a prototype by us quite a while ago to form the basis
 of dialogs in our IMS implementation using Kamailio. We took quite a lot
 from the existing dialog module at the time and then built the additional
 functionality on top. There were some things (like dlg_manage) that we did
 not move across and this is bad so I apologise.

 Right now to get a dialog recorded you need to define a flag in the
 modparam:
 modparam(dialog_ng, dlg_flag, 10)

 And then when you want to track a dlg do something like:

 if (is_method(INVITE)) {
setflag(10);
...
 }

 We have had a lot of other work to focus on and haven't spent too much
 time on dialog_ng but we will certainly put some effort into making it
 easier to use and more complete.

 Cheers
 Jason

 On Thu, Feb 5, 2015 at 8:03 PM, Shane Harrison shane.harri...@imgtec.com
 wrote:


 Thanks Daniel - that clarity helps.  Apologies if I should have been able
 to glean that from the docs - I just didn't see it in my reading.  FYI,
 dialog-ng has deprecated the dlg_mange() function.

 Can anybody who has used or involved in writing the dialog-ng module shed
 some light on what the new mechanism is for creating an early dialog
 structure?

 Cheers and thanks
 Shane

 
 From: sr-users [sr-users-boun...@lists.sip-router.org] on behalf of
 Daniel-Constantin Mierla [mico...@gmail.com]
 Sent: 06 February 2015 00:02
 To: Kamailio (SER) - Users Mailing List
 Subject: Re: [SR-Users] Using dialog_ng

 Hello,

 I haven't used the dialog_ng module, but (as expected based on the
 dialog module) if you only set the FLT_DIALOG flag, then the dialog is
 created when calling t_relay(). The dialog module has dlg_manage()
 function which creates the dialog immediately, maybe that's in dialog_ng
 as well.

 Cheers,
 Daniel

 On 04/02/15 05:28, Shane Harrison wrote:
  Hi all,
 
  I think the lack of response to my previous thread is probably because
 it was too complicated.  I have now narrowed my problem down after further
 archive readings .
 
  I am trying to use the dialog_ng module along with the
 ims_charging_module.  Upon reception of an INVITE, a call to the Ro_CCR()
 from the request_route script is made.  That function does a check that the
 dialog record exists (binds to dialog module and does a get_dlg(msg)
 call) - this fails i.e. dialog is not found.
 
  Running kamailio 4.2.2 and relevant sections of kamailio.cfg are:
  modparam(dialog_ng, dlg_flag, FLT_DIALOG)
  modparam(dialog_ng, timeout_avp, $avp(DLG_TIMEOUT_AVP))
  modparam(dialog_ng, detect_spirals, 1)
  modparam(dialog_ng, profiles_no_value, orig ; term)
 
  request_route {
  # NAT detection
  route(NATDETECT);
 
  # Set DLG flag to track dialogs using dialog2
  if (!is_method(REGISTER|SUBSCRIBE))
  setflag(FLT_DIALOG);
 
  # handle requests within SIP dialogs
  route(WITHINDLG);
 
  ### only initial requests (no To tag)
 
  # CANCEL processing
  if (is_method(CANCEL))
  {
  if (t_check_trans())
  t_relay();
  exit;
  }
 
  t_check_trans();
 
  if (is_method(INVITE))
  {
  set_dlg_profile(orig);
 Ro_CCR(CHARGING_CCR_REPLY, orig, SCUR, ,
 30,CCR_location);
 }
 
 
  So my question is, should the above logic create a dialog record on
 the initial INVITE? and if yes then what possible reasons might there be
 for the Ro_CCR() function not be able to detect it exists?
 
  Cheers
  Shane Harrison
 
 
 
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

 --
 Daniel-Constantin Mierla
 http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
 Kamailio World Conference, May 27-29, 2015
 Berlin, Germany - http://www.kamailioworld.com


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --

 *Jason Penton**Senior Manager: Applications and Services**Smile
 Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
 jason.barry.pentonjason.pen

Re: [SR-Users] Help analysing segmentation fault

[Jason Penton]

Hey Daniel,

I am puzzled by how this could make any difference? Could you explain? Is
this dependent on the compiler used and whether or not void* arithmetic is
allowed?

Cheers
Jason


On Fri, Aug 22, 2014 at 1:17 PM, Daniel-Constantin Mierla mico...@gmail.com
 wrote:

  Hello,

 can you try this small patch?

 diff --git a/modules/pua_dialoginfo/pua_dialoginfo.c
 b/modules/pua_dialoginfo/pua_dialoginfo.c
 index 1e88a04..0f02b2b 100644
 --- a/modules/pua_dialoginfo/pua_dialoginfo.c
 +++ b/modules/pua_dialoginfo/pua_dialoginfo.c
 @@ -347,7 +347,7 @@ struct str_list* get_str_list(unsigned short
 avp_flags, int_str avp_name) {

 memset( list_current, 0, len);

 -   list_current-s.s = (char*)( (void*) list_current +
 sizeof(struct str_list));
 +   list_current-s.s = (char*)list_current + sizeof(struct
 str_list);
 list_current-s.len = avp_value.s.len;
 memcpy(list_current-s.s,avp_value.s.s,avp_value.s.len);

 It is for 4.1.

 I have some ongoing work to commit soon on the master branch. if you
 confirm it is working fine, I will push this patch as well and backport to
 4.1.

 Cheers,
 Daniel


 On 22/08/14 13:03, Charles Chance wrote:

 Hi All,

  I wonder if some one could help me to diagnose a recurring issue?

  It happens at random times/intervals and under varying load. But always,
 just before the time of crash, I see the same critical error in log:

  CRITICAL: dialog [dlg_hash.c:841]: log_next_state_dlg(): bogus event 6
 in state 1 for dlg 0xb0632134 [1367:5814] with clid '
 0695dd7a346188dd24e7520e6c010...@sip.sipcentric.com' and tags
 'as77c89620' ''


  Analysing the core dump reveals:

  Core was generated by `/usr/sbin/kamailio -P /var/run/kamailio.pid -m
 128 -M 4 -u kamailio -g kamailio'.
 Program terminated with signal 11, Segmentation fault.
 #0  0x081a737c in parse_uri (buf=0x3a70006e Address 0x3a70006e out of
 bounds, len=275, uri=0xbfa2fd2c) at parser/parse_uri.c:389
 389 scheme=buf[0]+(buf[1]8)+(buf[2]16)+(buf[3]24);

  (gdb) frame 1

  #1  0x008fe5dd in dialog_publish (state=0x903f37 Trying,
 ruri=0xb0b5fd00, entity=0xb0632188, peer=0xb0632190, callid=0xb0632180,
 initiator=1, lifetime=7200, localtag=0x0, remotetag=0x0, localtarget=0x0,
 remotetarget=0x0, do_pubruri_localcheck=1) at dialog_publish.c:275
 275 if (parse_uri(ruri-s, ruri-len, ruri_uri)  0) {

  (gdb) p *ruri

   $1 = {s = 0x3a70006e Address 0x3a70006e out of bounds, len = 275}

  (gdb) up

  #2  0x008ff277 in dialog_publish_multi (state=0x903f37 Trying,
 ruris=0xb0b5fd00, entity=0xb0632188, peer=0xb0632190, callid=0xb0632180,
 initiator=1, lifetime=7200, localtag=0x0, remotetag=0x0,
 localtarget=0x0, remotetarget=0x0, do_pubruri_localcheck=1) at
 dialog_publish.c:387
 387
 dialog_publish(state,(ruris-s),entity,peer,callid,initiator,lifetime,localtag,remotetag,localtarget,remotetarget,do_pubruri_localcheck);

  (gdb) p *ruris

  $2 = {s = {s = 0x3a70006e Address 0x3a70006e out of bounds, len =
 275}, next = 0x0}

  (gdb) up

  #3  0x0090187a in __dialog_created (dlg=0xb0632134, type=2,
 _params=0x6db064) at pua_dialoginfo.c:470
 470 dialog_publish_multi(Trying, dlginfo-pubruris_caller,
 (dlg-from_uri), (include_req_uri)?(dlg-req_uri):(dlg-to_uri),
 (dlg-callid), 1, dlginfo-lifetime, 0, 0, 0, 0,
 send_publish_flag==-1?1:0);

  (gdb) p *dlginfo-pubruris_caller

  $3 = {s = {s = 0x31590014 Address 0x31590014 out of bounds, len =
 275}, next = 0xb0b5fd00}

  (gdb) p *dlginfo-pubruris_caller-next

  $4 = {s = {s = 0x3a70006e Address 0x3a70006e out of bounds, len =
 275}, next = 0x0}


  In config, for pua_dialoginfo we are enabling the option
 use_pubruri_avps and setting pubruri_caller_avp and
 pubruri_callee_avp accordingly.

  Therefore, in pua_dialoginfo.c it is using get_str_list() function to
 set dlginfo-pubruris_caller from the avp.

  Could this be some race condition or something completely different?

  Thanks in advance,

  Charles



 www.sipcentric.com

 Follow us on twitter @sipcentric http://twitter.com/sipcentric

 Sipcentric Ltd. Company registered in England  Wales no. 7365592. Registered
 office: Faraday Wharf, Innovation Birmingham Campus, Holt Street,
 Birmingham Science Park, Birmingham B7 4BB.

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing 
 listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


 --
 Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - 
 http://www.linkedin.com/in/miconda
 Next Kamailio Advanced Trainings 2014 - http://www.asipto.com
 Sep 22-25, Berlin, Germany ::: Oct 15-17, San Francisco, USA


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications

Re: [SR-Users] Help analysing segmentation fault

[Jason Penton]

Yeah, would be cool to see what compiler Charles is using.

Thanks Daniel
On 28 Aug 2014 22:25, Daniel-Constantin Mierla mico...@gmail.com wrote:

  Hello,

 On 28/08/14 20:32, Jason Penton wrote:

 Hey Daniel,

  I am puzzled by how this could make any difference? Could you explain?
 Is this dependent on the compiler used and whether or not void* arithmetic
 is allowed?


 void is incomplete type, of no defined data size, you cannot have:

 void x;

 There is nothing you can assign to x.

 An increment of a pointer jumps in memory with the size of its data type
 (e.g., char* is incremented by 1 byte, int* is incremented by 4 bytes). But
 for void is mostly unknown behaviour. Based on web, apparently gcc
 considers sizeof(void) to be 1, but it is not a C standard. Others suggests
 should be zero (because that's why is a 'void' pointer :-) ).

 Maybe Charles can say what compiler he was using.

 Cheers,
 Daniel


  Cheers
 Jason


 On Fri, Aug 22, 2014 at 1:17 PM, Daniel-Constantin Mierla 
 mico...@gmail.com wrote:

  Hello,

 can you try this small patch?

 diff --git a/modules/pua_dialoginfo/pua_dialoginfo.c
 b/modules/pua_dialoginfo/pua_dialoginfo.c
 index 1e88a04..0f02b2b 100644
 --- a/modules/pua_dialoginfo/pua_dialoginfo.c
 +++ b/modules/pua_dialoginfo/pua_dialoginfo.c
 @@ -347,7 +347,7 @@ struct str_list* get_str_list(unsigned short
 avp_flags, int_str avp_name) {

 memset( list_current, 0, len);

 -   list_current-s.s = (char*)( (void*) list_current +
 sizeof(struct str_list));
 +   list_current-s.s = (char*)list_current + sizeof(struct
 str_list);
 list_current-s.len = avp_value.s.len;
 memcpy(list_current-s.s,avp_value.s.s,avp_value.s.len);

 It is for 4.1.

 I have some ongoing work to commit soon on the master branch. if you
 confirm it is working fine, I will push this patch as well and backport to
 4.1.

 Cheers,
 Daniel


 On 22/08/14 13:03, Charles Chance wrote:

  Hi All,

  I wonder if some one could help me to diagnose a recurring issue?

  It happens at random times/intervals and under varying load. But
 always, just before the time of crash, I see the same critical error in log:

  CRITICAL: dialog [dlg_hash.c:841]: log_next_state_dlg(): bogus event 6
 in state 1 for dlg 0xb0632134 [1367:5814] with clid '
 0695dd7a346188dd24e7520e6c010...@sip.sipcentric.com' and tags
 'as77c89620' ''


  Analysing the core dump reveals:

  Core was generated by `/usr/sbin/kamailio -P /var/run/kamailio.pid -m
 128 -M 4 -u kamailio -g kamailio'.
 Program terminated with signal 11, Segmentation fault.
 #0  0x081a737c in parse_uri (buf=0x3a70006e Address 0x3a70006e out of
 bounds, len=275, uri=0xbfa2fd2c) at parser/parse_uri.c:389
 389 scheme=buf[0]+(buf[1]8)+(buf[2]16)+(buf[3]24);

  (gdb) frame 1

  #1  0x008fe5dd in dialog_publish (state=0x903f37 Trying,
 ruri=0xb0b5fd00, entity=0xb0632188, peer=0xb0632190, callid=0xb0632180,
 initiator=1, lifetime=7200, localtag=0x0, remotetag=0x0, localtarget=0x0,
 remotetarget=0x0, do_pubruri_localcheck=1) at dialog_publish.c:275
 275 if (parse_uri(ruri-s, ruri-len, ruri_uri)  0) {

  (gdb) p *ruri

   $1 = {s = 0x3a70006e Address 0x3a70006e out of bounds, len = 275}

  (gdb) up

  #2  0x008ff277 in dialog_publish_multi (state=0x903f37 Trying,
 ruris=0xb0b5fd00, entity=0xb0632188, peer=0xb0632190, callid=0xb0632180,
 initiator=1, lifetime=7200, localtag=0x0, remotetag=0x0,
 localtarget=0x0, remotetarget=0x0, do_pubruri_localcheck=1) at
 dialog_publish.c:387
 387
 dialog_publish(state,(ruris-s),entity,peer,callid,initiator,lifetime,localtag,remotetag,localtarget,remotetarget,do_pubruri_localcheck);

  (gdb) p *ruris

  $2 = {s = {s = 0x3a70006e Address 0x3a70006e out of bounds, len =
 275}, next = 0x0}

  (gdb) up

  #3  0x0090187a in __dialog_created (dlg=0xb0632134, type=2,
 _params=0x6db064) at pua_dialoginfo.c:470
 470 dialog_publish_multi(Trying, dlginfo-pubruris_caller,
 (dlg-from_uri), (include_req_uri)?(dlg-req_uri):(dlg-to_uri),
 (dlg-callid), 1, dlginfo-lifetime, 0, 0, 0, 0,
 send_publish_flag==-1?1:0);

  (gdb) p *dlginfo-pubruris_caller

  $3 = {s = {s = 0x31590014 Address 0x31590014 out of bounds, len =
 275}, next = 0xb0b5fd00}

  (gdb) p *dlginfo-pubruris_caller-next

  $4 = {s = {s = 0x3a70006e Address 0x3a70006e out of bounds, len =
 275}, next = 0x0}


  In config, for pua_dialoginfo we are enabling the option
 use_pubruri_avps and setting pubruri_caller_avp and
 pubruri_callee_avp accordingly.

  Therefore, in pua_dialoginfo.c it is using get_str_list() function to
 set dlginfo-pubruris_caller from the avp.

  Could this be some race condition or something completely different?

  Thanks in advance,

  Charles



 www.sipcentric.com

 Follow us on twitter @sipcentric http://twitter.com/sipcentric

 Sipcentric Ltd. Company registered in England  Wales no. 7365592. Registered
 office: Faraday Wharf, Innovation Birmingham Campus, Holt Street,
 Birmingham Science Park

Re: [SR-Users] cxdx_forced_peer - more info

[Jason Penton]

Hi Daniel,

I don't think it's in the docs. I will add just now...

forced peer basically means that the diameter messages will be sent to that
peer regardless of how you have configured the routing in your diameter xml
configuration file.

Cheers
Jason


On Mon, Jun 2, 2014 at 11:32 PM, Daniel Ciprus daniel.cip...@acision.com
wrote:

  Hi,

 Could any of you please point me to the doc which explains more in details
 parameter cxdx_forced_peer ? The only place I found is
 http://kamailio.org/docs/modules/stable/modules/ims_icscf.html#idp19.

 thanks


 --
 *Daniel Ciprus*
 Integration engineer
 http://www.acision.com

 9954 Mayland Dr
 Suite 3100
 Richmond, VA 23233
 USA
 T: +1 804 762 5601
 E: daniel.cip...@acision.com

 --
 This e-mail and any attachment is for authorised use by the intended
 recipient(s) only. It may contain proprietary material, confidential
 information and/or be subject to legal privilege. It should not be copied,
 disclosed to, retained or used by, any other party. If you are not an
 intended recipient then please promptly delete this e-mail and any
 attachment and all copies and inform the sender. Thank you for
 understanding.


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio and FHoSS integration

[Jason Penton]

Yes it will work with FHoSS. The interfaces between I-CSCF and S-CSCF and
HSS using CxDx interfaces are standards-based using Diameter. Both Kamailio
IMS modules and FHoSS are based on these standards.

Cheers
Jason


On Mon, Apr 28, 2014 at 10:51 AM, Andrea Meroni rucola8...@gmail.comwrote:

 You're right, but for the Kamailio part i just want to know if the
 integration with FHoSS works well ... I mean: FHoSS is advised as HSS to be
 used with a Kamailio-based IMS architecture, but is it also the one
 preferred by the users/developers for which concerns performance issues?

 Andrea


 On Mon, Apr 28, 2014 at 9:48 AM, Daniel-Constantin Mierla 
 mico...@gmail.com wrote:

  Hello,

 maybe asking on the mailing list for FHoSS would give more leads...

 Cheers,
 Daniel


 On 17/04/14 17:29, Andrea Meroni wrote:

  Hi all,

  i am testing a very basic IMS core Kamailio-based using as HSS FHoSS.
 However, while using SIPp to stress the system, i noticed that the VM
 hosting the FHoSS is overloaded (even with 2 registration scenarios per
 second), in particular using top i was able to see that the java process
 used almost 200% of the CPU (i run the VM using qemu with options -m 1024
 -smp 4). Is it normal or have i misconfigured something? Someone else has
 the same problem?

  Andrea


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing 
 listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


 --
 Daniel-Constantin Mierla - 
 http://www.asipto.comhttp://twitter.com/#!/miconda - 
 http://www.linkedin.com/in/miconda


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio and FHoSS integration

[Jason Penton]

+1 on Carsten's email


On Mon, Apr 28, 2014 at 11:01 AM, Carsten Bock cars...@ng-voice.com wrote:

 Hi Andrea,

 as i stated in my presentation during KamailioWorld:

 All components for Testbeds available as OpenSource

 I think, the FHoSS is one of the components, which work with Kamailio
 pretty well (from a technical/standards perspective), but also the
 component, which i never would use for a real-life setup due to the
 poor performance.
 We (at ng-voice) for example use our own HSS, which is based on JBoss
  Mobicents and which is tightly integrated into our own provisioning
 platforms (and which lacks some features of the FHoSS, such as the
 Sh-Interface).

 Kind regards,
 Carsten





 2014-04-28 10:51 GMT+02:00 Andrea Meroni rucola8...@gmail.com:
  You're right, but for the Kamailio part i just want to know if the
  integration with FHoSS works well ... I mean: FHoSS is advised as HSS to
 be
  used with a Kamailio-based IMS architecture, but is it also the one
  preferred by the users/developers for which concerns performance issues?
 
  Andrea
 
 
  On Mon, Apr 28, 2014 at 9:48 AM, Daniel-Constantin Mierla
  mico...@gmail.com wrote:
 
  Hello,
 
  maybe asking on the mailing list for FHoSS would give more leads...
 
  Cheers,
  Daniel
 
 
  On 17/04/14 17:29, Andrea Meroni wrote:
 
  Hi all,
 
  i am testing a very basic IMS core Kamailio-based using as HSS FHoSS.
  However, while using SIPp to stress the system, i noticed that the VM
  hosting the FHoSS is overloaded (even with 2 registration scenarios per
  second), in particular using top i was able to see that the java process
  used almost 200% of the CPU (i run the VM using qemu with options -m
 1024
  -smp 4). Is it normal or have i misconfigured something? Someone else
 has
  the same problem?
 
  Andrea
 
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
 
 
  --
  Daniel-Constantin Mierla - http://www.asipto.com
  http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
 
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
 
 
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
 



 --
 Carsten Bock
 CEO (Geschäftsführer)

 ng-voice GmbH
 Schomburgstr. 80
 D-22767 Hamburg / Germany

 http://www.ng-voice.com
 mailto:cars...@ng-voice.com

 Office +49 40 34927219
 Fax +49 40 34927220

 Sitz der Gesellschaft: Hamburg
 Registergericht: Amtsgericht Hamburg, HRB 120189
 Geschäftsführer: Carsten Bock
 Ust-ID: DE279344284

 Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
 http://www.ng-voice.com/imprint/

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] P-CSCF using MYSQL database

[Jason Penton]

Hi Andrea,

Are you using master?

Cheers
Jason


On Mon, Apr 7, 2014 at 11:57 AM, Andrea Meroni rucola8...@gmail.com wrote:

 Update: even with the UCT IMS client it didn't work, both with db mode 0
 and 1. From Kamailio config file i checked out that the exported function
 that generates the issue is pcscf_is_registered. But why the check fails?

 Andrea


 On Mon, Apr 7, 2014 at 10:29 AM, Andrea Meroni rucola8...@gmail.comwrote:

 I tried to switch to the old db_mode 0 (no db at all), and i got the
 same error for the call. The registrations seems to works fine: running
 ulpcscf.status from kamcmd gives me that in the P-CSCF memory there are
 actually 2 AORs, so ... Is it a bug of the new version?? Everything works
 fine with 4.1.x ... Or maybe it is a problem of the SIP requests i've
 generated??


 On Fri, Apr 4, 2014 at 6:12 PM, Andrea Meroni rucola8...@gmail.comwrote:

 Here we are (the pcap are captured with Wireshark). I noticed that:

 - the users' are correctly inserted in the location table of the pcscf DB
 - the users' are correctly inserted in the contact table of the scscf DB
  (alice in scscf and bob in scscf2)

 However, as you can see, i'm not able to make a call. But if i set
 db_mode to 0 (for ims_usrloc_pcscf) everything work fine. What am i
 missing? I supposed that some checks on some tables' fields fail ... But i
 can't figure out why ... Sorry for the logs, i'll send you asap

 Andrea


 On Fri, Apr 4, 2014 at 1:48 PM, Jason Penton jason.pen...@smilecoms.com
  wrote:

 no you don't need the S-CSCF DB support unless you want it.

 Can you send debug log of P-CSCF as well as pcap of the same attempt.
 Include both registrations and the call.

 cheers
 Jason


 On Fri, Apr 4, 2014 at 2:22 PM, Andrea Meroni rucola8...@gmail.comwrote:

 Ok, using the new scheme the contact records are correctly saved in
 the DB (both for Alice and Bob). But i still get the same error. Perhaps
 its a stupid question ... Should i also add the DB support in the S-CSCFs?
 Isn't enough (for some preliminar tests, just to look at the Kamailio's
 behavior) to add it only for the P-CSCF?

 Andrea


 On Fri, Apr 4, 2014 at 10:47 AM, Andrea Meroni 
 rucola8...@gmail.comwrote:

 Well ... Just let me try to explain the situation:

 - Alice registers on scscf1 through pcscf: ok
 - Bob registers on scscf2 through pcscf: ok (i get a 200 OK after the
 challenge), but the Bob's record isn't inserted in the local db of the
 pcscf (because probably i mismatch something in the db configuration, 
 that
 as i told you i did by hand)
 - Alice tries to call Bob: after Alice's has sent the first request
 to the proxy i get the error response, from the pcscf.

 I guess that even if Bob's record hasn't been inserted in the db
 Kamailio could retrieve it from the shared memory ... My only concern was
 that even Alice's registration was wrong, or that right now the
 usrloc-registrar engine for both pcscf and scscf isn't able to manage 
 db
 access. Has someone already make some tests about that?

 Andrea



 On Fri, Apr 4, 2014 at 10:35 AM, Jason Penton 
 jason.pen...@smilecoms.com wrote:

 In this case you have not successfully registered the B party for
 some reason...


 On Fri, Apr 4, 2014 at 11:33 AM, Andrea Meroni rucola8...@gmail.com
  wrote:

 Just another couple of questions:

 - now the tables are added simply when is run kamdbctl create?
 - the modules read properly the infos from the db or are there
 others open issues (i tried with my db, modified by hand, to 
 registrate a
 user, and it was ok; then i tried to make a call to another user, but i
 receive a Forbidden: you must register with a S-CSCF first)?

 Andrea


 On Fri, Apr 4, 2014 at 10:13 AM, Andrea Meroni 
 rucola8...@gmail.com wrote:

 Ok, thank you very much


 On Fri, Apr 4, 2014 at 10:06 AM, Jason Penton 
 jason.pen...@smilecoms.com wrote:

 master, yes

 utils/kamctl/mysql/


 On Fri, Apr 4, 2014 at 11:02 AM, Andrea Meroni 
 rucola8...@gmail.com wrote:

 Many many thanks ... Is it in examples/pcscf? In the master
 branch?


 On Fri, Apr 4, 2014 at 10:00 AM, Jason Penton 
 jason.pen...@smilecoms.com wrote:

 Hi Andrea,

 I have just added the schema to git repo.

 Cheers
 Jason


 On Fri, Apr 4, 2014 at 10:17 AM, Andrea Meroni 
 rucola8...@gmail.com wrote:

 Edit: i successfully make it working, by adding the proper
 columns in the database. However, i still have some issues ... 
 Does anyone
 know where i can get a description of the DB structure of 
 Kamailio?
 Especially the tables needed for the modules i mentioned in the 
 previous
 mail?

 Andrea


 On Thu, Apr 3, 2014 at 2:49 PM, Andrea Meroni 
 rucola8...@gmail.com wrote:

 Hi all,

 i am trying to configure an IMS Core Kamailio-based: while
 configuring the P-CSCF, i set up the parameters 'db_url' and 
 'db_mode' of
 the module ims_usrloc_pcscf respectively to
 'mysql://kamailio:kamailiorw@localhost/kamailio' and 1
 (because i want a DB for persistence). I had created 
 successfully the DB
 using

Re: [SR-Users] P-CSCF using MYSQL database

[Jason Penton]

No, there is no know issue. can you send me the full debug log file?


On Mon, Apr 7, 2014 at 12:07 PM, Andrea Meroni rucola8...@gmail.com wrote:

 Yes, i'm using master. I browsed the tree searching the nested function
 that generates the error (check failed) and it should be getContactP(struct
 sip_msg* _m, udomain_t* _d) in ims_registrar_pcscf/service_routes.c. I will
 try to do other tests searching on which attribute the check fails.
 Meanwhile, if you don't mind, please tell me if the it is a known bug or
 no, so maybe i can fix it :)

 Andrea


 On Mon, Apr 7, 2014 at 11:02 AM, Jason Penton 
 jason.pen...@smilecoms.comwrote:

 Hi Andrea,

 Are you using master?

 Cheers
 Jason


 On Mon, Apr 7, 2014 at 11:57 AM, Andrea Meroni rucola8...@gmail.comwrote:

 Update: even with the UCT IMS client it didn't work, both with db mode 0
 and 1. From Kamailio config file i checked out that the exported function
 that generates the issue is pcscf_is_registered. But why the check fails?

 Andrea


 On Mon, Apr 7, 2014 at 10:29 AM, Andrea Meroni rucola8...@gmail.comwrote:

 I tried to switch to the old db_mode 0 (no db at all), and i got the
 same error for the call. The registrations seems to works fine: running
 ulpcscf.status from kamcmd gives me that in the P-CSCF memory there are
 actually 2 AORs, so ... Is it a bug of the new version?? Everything works
 fine with 4.1.x ... Or maybe it is a problem of the SIP requests i've
 generated??


 On Fri, Apr 4, 2014 at 6:12 PM, Andrea Meroni rucola8...@gmail.comwrote:

 Here we are (the pcap are captured with Wireshark). I noticed that:

 - the users' are correctly inserted in the location table of the pcscf
 DB
 - the users' are correctly inserted in the contact table of the scscf
 DB
  (alice in scscf and bob in scscf2)

 However, as you can see, i'm not able to make a call. But if i set
 db_mode to 0 (for ims_usrloc_pcscf) everything work fine. What am i
 missing? I supposed that some checks on some tables' fields fail ... But i
 can't figure out why ... Sorry for the logs, i'll send you asap

 Andrea


 On Fri, Apr 4, 2014 at 1:48 PM, Jason Penton 
 jason.pen...@smilecoms.com wrote:

 no you don't need the S-CSCF DB support unless you want it.

 Can you send debug log of P-CSCF as well as pcap of the same attempt.
 Include both registrations and the call.

 cheers
 Jason


 On Fri, Apr 4, 2014 at 2:22 PM, Andrea Meroni 
 rucola8...@gmail.comwrote:

 Ok, using the new scheme the contact records are correctly saved in
 the DB (both for Alice and Bob). But i still get the same error. Perhaps
 its a stupid question ... Should i also add the DB support in the 
 S-CSCFs?
 Isn't enough (for some preliminar tests, just to look at the Kamailio's
 behavior) to add it only for the P-CSCF?

 Andrea


 On Fri, Apr 4, 2014 at 10:47 AM, Andrea Meroni rucola8...@gmail.com
  wrote:

 Well ... Just let me try to explain the situation:

 - Alice registers on scscf1 through pcscf: ok
 - Bob registers on scscf2 through pcscf: ok (i get a 200 OK after
 the challenge), but the Bob's record isn't inserted in the local db of 
 the
 pcscf (because probably i mismatch something in the db configuration, 
 that
 as i told you i did by hand)
 - Alice tries to call Bob: after Alice's has sent the first request
 to the proxy i get the error response, from the pcscf.

 I guess that even if Bob's record hasn't been inserted in the db
 Kamailio could retrieve it from the shared memory ... My only concern 
 was
 that even Alice's registration was wrong, or that right now the
 usrloc-registrar engine for both pcscf and scscf isn't able to 
 manage db
 access. Has someone already make some tests about that?

 Andrea



 On Fri, Apr 4, 2014 at 10:35 AM, Jason Penton 
 jason.pen...@smilecoms.com wrote:

 In this case you have not successfully registered the B party for
 some reason...


 On Fri, Apr 4, 2014 at 11:33 AM, Andrea Meroni 
 rucola8...@gmail.com wrote:

 Just another couple of questions:

 - now the tables are added simply when is run kamdbctl create?
 - the modules read properly the infos from the db or are there
 others open issues (i tried with my db, modified by hand, to 
 registrate a
 user, and it was ok; then i tried to make a call to another user, 
 but i
 receive a Forbidden: you must register with a S-CSCF first)?

 Andrea


 On Fri, Apr 4, 2014 at 10:13 AM, Andrea Meroni 
 rucola8...@gmail.com wrote:

 Ok, thank you very much


 On Fri, Apr 4, 2014 at 10:06 AM, Jason Penton 
 jason.pen...@smilecoms.com wrote:

 master, yes

 utils/kamctl/mysql/


 On Fri, Apr 4, 2014 at 11:02 AM, Andrea Meroni 
 rucola8...@gmail.com wrote:

 Many many thanks ... Is it in examples/pcscf? In the master
 branch?


 On Fri, Apr 4, 2014 at 10:00 AM, Jason Penton 
 jason.pen...@smilecoms.com wrote:

 Hi Andrea,

 I have just added the schema to git repo.

 Cheers
 Jason


 On Fri, Apr 4, 2014 at 10:17 AM, Andrea Meroni 
 rucola8...@gmail.com wrote:

 Edit: i successfully make it working, by adding

Re: [SR-Users] P-CSCF using MYSQL database

[Jason Penton]

Hi Andrea,

I have just added the schema to git repo.

Cheers
Jason


On Fri, Apr 4, 2014 at 10:17 AM, Andrea Meroni rucola8...@gmail.com wrote:

 Edit: i successfully make it working, by adding the proper columns in the
 database. However, i still have some issues ... Does anyone know where i
 can get a description of the DB structure of Kamailio? Especially the
 tables needed for the modules i mentioned in the previous mail?

 Andrea


 On Thu, Apr 3, 2014 at 2:49 PM, Andrea Meroni rucola8...@gmail.comwrote:

 Hi all,

 i am trying to configure an IMS Core Kamailio-based: while configuring
 the P-CSCF, i set up the parameters 'db_url' and 'db_mode' of the module
 ims_usrloc_pcscf respectively to 
 'mysql://kamailio:kamailiorw@localhost/kamailio'
 and 1 (because i want a DB for persistence). I had created successfully the
 DB using kamdbctl, and loaded the module 'db_mysql' in kamailio.cfg. Then i
 tried to run Kamailio, and i got this error:

 ERROR: db_mysql [km_dbase.c:122]: db_mysql_submit_query: driver error on
 query: Unknown column 'aor' in 'field list'

 What am i missing? Consider then when i created the DB i answer yes to
 all the questions about creating additional tables ...

 Andrea



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] P-CSCF using MYSQL database

[Jason Penton]

master, yes

utils/kamctl/mysql/


On Fri, Apr 4, 2014 at 11:02 AM, Andrea Meroni rucola8...@gmail.com wrote:

 Many many thanks ... Is it in examples/pcscf? In the master branch?


 On Fri, Apr 4, 2014 at 10:00 AM, Jason Penton 
 jason.pen...@smilecoms.comwrote:

 Hi Andrea,

 I have just added the schema to git repo.

 Cheers
 Jason


 On Fri, Apr 4, 2014 at 10:17 AM, Andrea Meroni rucola8...@gmail.comwrote:

 Edit: i successfully make it working, by adding the proper columns in
 the database. However, i still have some issues ... Does anyone know where
 i can get a description of the DB structure of Kamailio? Especially the
 tables needed for the modules i mentioned in the previous mail?

 Andrea


 On Thu, Apr 3, 2014 at 2:49 PM, Andrea Meroni rucola8...@gmail.comwrote:

 Hi all,

 i am trying to configure an IMS Core Kamailio-based: while configuring
 the P-CSCF, i set up the parameters 'db_url' and 'db_mode' of the module
 ims_usrloc_pcscf respectively to 
 'mysql://kamailio:kamailiorw@localhost/kamailio'
 and 1 (because i want a DB for persistence). I had created successfully the
 DB using kamdbctl, and loaded the module 'db_mysql' in kamailio.cfg. Then i
 tried to run Kamailio, and i got this error:

 ERROR: db_mysql [km_dbase.c:122]: db_mysql_submit_query: driver error
 on query: Unknown column 'aor' in 'field list'

 What am i missing? Consider then when i created the DB i answer yes to
 all the questions about creating additional tables ...

 Andrea



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --

  *Jason Penton**Senior Manager: Applications and Services* *Smile
 Communications Pty (Ltd)* *Mobile:* +27 (0) 83 283 7000 
 *Skype:*jason.barry.penton
 jason.pen...@smilecoms.com name.surn...@smilecoms.com www.smilecoms.com



 This email is subject to the disclaimer of Smile Communications at 
 http://www.smilecoms.com/home/email-disclaimer/ 
 http://www.smilecoms.com/disclaimer


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] P-CSCF using MYSQL database

[Jason Penton]

In this case you have not successfully registered the B party for some
reason...


On Fri, Apr 4, 2014 at 11:33 AM, Andrea Meroni rucola8...@gmail.com wrote:

 Just another couple of questions:

 - now the tables are added simply when is run kamdbctl create?
 - the modules read properly the infos from the db or are there others open
 issues (i tried with my db, modified by hand, to registrate a user, and it
 was ok; then i tried to make a call to another user, but i receive a
 Forbidden: you must register with a S-CSCF first)?

 Andrea


 On Fri, Apr 4, 2014 at 10:13 AM, Andrea Meroni rucola8...@gmail.comwrote:

 Ok, thank you very much


 On Fri, Apr 4, 2014 at 10:06 AM, Jason Penton jason.pen...@smilecoms.com
  wrote:

 master, yes

 utils/kamctl/mysql/


 On Fri, Apr 4, 2014 at 11:02 AM, Andrea Meroni rucola8...@gmail.comwrote:

 Many many thanks ... Is it in examples/pcscf? In the master branch?


 On Fri, Apr 4, 2014 at 10:00 AM, Jason Penton 
 jason.pen...@smilecoms.com wrote:

 Hi Andrea,

 I have just added the schema to git repo.

 Cheers
 Jason


 On Fri, Apr 4, 2014 at 10:17 AM, Andrea Meroni 
 rucola8...@gmail.comwrote:

 Edit: i successfully make it working, by adding the proper columns in
 the database. However, i still have some issues ... Does anyone know 
 where
 i can get a description of the DB structure of Kamailio? Especially the
 tables needed for the modules i mentioned in the previous mail?

 Andrea


 On Thu, Apr 3, 2014 at 2:49 PM, Andrea Meroni 
 rucola8...@gmail.comwrote:

 Hi all,

 i am trying to configure an IMS Core Kamailio-based: while
 configuring the P-CSCF, i set up the parameters 'db_url' and 'db_mode' 
 of
 the module ims_usrloc_pcscf respectively to
 'mysql://kamailio:kamailiorw@localhost/kamailio' and 1 (because i
 want a DB for persistence). I had created successfully the DB using
 kamdbctl, and loaded the module 'db_mysql' in kamailio.cfg. Then i 
 tried to
 run Kamailio, and i got this error:

 ERROR: db_mysql [km_dbase.c:122]: db_mysql_submit_query: driver
 error on query: Unknown column 'aor' in 'field list'

 What am i missing? Consider then when i created the DB i answer yes
 to all the questions about creating additional tables ...

 Andrea



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
 list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --

  *Jason Penton**Senior Manager: Applications and Services* *Smile
 Communications Pty (Ltd)* *Mobile:* +27 (0) 83 283 7000 
 *Skype:*jason.barry.penton
 jason.pen...@smilecoms.com name.surn...@smilecoms.com
 www.smilecoms.com



 This email is subject to the disclaimer of Smile Communications at 
 http://www.smilecoms.com/home/email-disclaimer/ 
 http://www.smilecoms.com/disclaimer


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --

  *Jason Penton**Senior Manager: Applications and Services* *Smile
 Communications Pty (Ltd)* *Mobile:* +27 (0) 83 283 7000 
 *Skype:*jason.barry.penton
 jason.pen...@smilecoms.com name.surn...@smilecoms.com
 www.smilecoms.com



 This email is subject to the disclaimer of Smile Communications at 
 http://www.smilecoms.com/home/email-disclaimer/ 
 http://www.smilecoms.com/disclaimer


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] P-CSCF using MYSQL database

[Jason Penton]

no you don't need the S-CSCF DB support unless you want it.

Can you send debug log of P-CSCF as well as pcap of the same attempt.
Include both registrations and the call.

cheers
Jason


On Fri, Apr 4, 2014 at 2:22 PM, Andrea Meroni rucola8...@gmail.com wrote:

 Ok, using the new scheme the contact records are correctly saved in the DB
 (both for Alice and Bob). But i still get the same error. Perhaps its a
 stupid question ... Should i also add the DB support in the S-CSCFs? Isn't
 enough (for some preliminar tests, just to look at the Kamailio's behavior)
 to add it only for the P-CSCF?

 Andrea


 On Fri, Apr 4, 2014 at 10:47 AM, Andrea Meroni rucola8...@gmail.comwrote:

 Well ... Just let me try to explain the situation:

 - Alice registers on scscf1 through pcscf: ok
 - Bob registers on scscf2 through pcscf: ok (i get a 200 OK after the
 challenge), but the Bob's record isn't inserted in the local db of the
 pcscf (because probably i mismatch something in the db configuration, that
 as i told you i did by hand)
 - Alice tries to call Bob: after Alice's has sent the first request to
 the proxy i get the error response, from the pcscf.

 I guess that even if Bob's record hasn't been inserted in the db Kamailio
 could retrieve it from the shared memory ... My only concern was that even
 Alice's registration was wrong, or that right now the usrloc-registrar
 engine for both pcscf and scscf isn't able to manage db access. Has
 someone already make some tests about that?

 Andrea



 On Fri, Apr 4, 2014 at 10:35 AM, Jason Penton jason.pen...@smilecoms.com
  wrote:

 In this case you have not successfully registered the B party for some
 reason...


 On Fri, Apr 4, 2014 at 11:33 AM, Andrea Meroni rucola8...@gmail.comwrote:

 Just another couple of questions:

 - now the tables are added simply when is run kamdbctl create?
 - the modules read properly the infos from the db or are there others
 open issues (i tried with my db, modified by hand, to registrate a user,
 and it was ok; then i tried to make a call to another user, but i receive a
 Forbidden: you must register with a S-CSCF first)?

 Andrea


 On Fri, Apr 4, 2014 at 10:13 AM, Andrea Meroni rucola8...@gmail.comwrote:

 Ok, thank you very much


 On Fri, Apr 4, 2014 at 10:06 AM, Jason Penton 
 jason.pen...@smilecoms.com wrote:

 master, yes

 utils/kamctl/mysql/


 On Fri, Apr 4, 2014 at 11:02 AM, Andrea Meroni 
 rucola8...@gmail.comwrote:

 Many many thanks ... Is it in examples/pcscf? In the master branch?


 On Fri, Apr 4, 2014 at 10:00 AM, Jason Penton 
 jason.pen...@smilecoms.com wrote:

 Hi Andrea,

 I have just added the schema to git repo.

 Cheers
 Jason


 On Fri, Apr 4, 2014 at 10:17 AM, Andrea Meroni 
 rucola8...@gmail.com wrote:

 Edit: i successfully make it working, by adding the proper columns
 in the database. However, i still have some issues ... Does anyone 
 know
 where i can get a description of the DB structure of Kamailio? 
 Especially
 the tables needed for the modules i mentioned in the previous mail?

 Andrea


 On Thu, Apr 3, 2014 at 2:49 PM, Andrea Meroni 
 rucola8...@gmail.com wrote:

 Hi all,

 i am trying to configure an IMS Core Kamailio-based: while
 configuring the P-CSCF, i set up the parameters 'db_url' and 
 'db_mode' of
 the module ims_usrloc_pcscf respectively to
 'mysql://kamailio:kamailiorw@localhost/kamailio' and 1 (because
 i want a DB for persistence). I had created successfully the DB using
 kamdbctl, and loaded the module 'db_mysql' in kamailio.cfg. Then i 
 tried to
 run Kamailio, and i got this error:

 ERROR: db_mysql [km_dbase.c:122]: db_mysql_submit_query: driver
 error on query: Unknown column 'aor' in 'field list'

 What am i missing? Consider then when i created the DB i answer
 yes to all the questions about creating additional tables ...

 Andrea



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
 list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --

  *Jason Penton**Senior Manager: Applications and Services* *Smile
 Communications Pty (Ltd)* *Mobile:* +27 (0) 83 283 7000 
 *Skype:*jason.barry.penton
 jason.pen...@smilecoms.com name.surn...@smilecoms.com
 www.smilecoms.com



 This email is subject to the disclaimer of Smile Communications at 
 http://www.smilecoms.com/home/email-disclaimer/ 
 http://www.smilecoms.com/disclaimer


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
 list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
 list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --

  *Jason Penton**Senior Manager: Applications and Services* *Smile
 Communications Pty (Ltd)* *Mobile:* +27

Re: [SR-Users] p-cscf - out of mem

[Jason Penton]

Hey Daniel,

Please check this commit. I think you are running before this was added?

commit 1d6b1d8765d7a6d21c291d2076a3a80a1710c11c
Author: Jason Penton jason.pen...@gmail.com
Date:   Fri Feb 14 09:57:45 2014 +0200

lib/ims:modules/ims_charging,ims_icscf,ims_qos,ims_registrar_scscf:
fixed pkg_mem leak
- fixed leak when parsing msg headers on a shm msg
- instead now pass in flag to say if parsing is on shm_msg or not
(is_shm)
- assumes all common headers are already parsed before pkg_mem msg
is cloned


Cheers
Jason


On Mon, Mar 3, 2014 at 11:22 PM, Jason Penton jason.pen...@smilecoms.comwrote:

 Thanks Daniel,

 How much pkg and shm memory is assigned to your Kamailio instance? Also,
 how many users are you registering concurrently? Please also recreate and
 dump shm memory when you get a chance. If you are not sure how to dump shm
 memory - see here -
 http://www.kamailio.org/dokuwiki/doku.php/troubleshooting:memory

 Cheers
 Jason


 On Mon, Mar 3, 2014 at 11:07 PM, Daniel Ciprus 
 daniel.cip...@acision.comwrote:

  Jason,

 HW configuration : this is a virtual machine running 4 cores with 24GB
 ram (VM hosting).

 processor   : 3
 vendor_id   : GenuineIntel
 cpu family  : 6
 model   : 26
 model name  : Intel(R) Xeon(R) CPU E5-2667 0 @ 2.90GHz
 stepping: 4
 cpu MHz : 2900.000
 cache size  : 15360 KB
 fpu : yes
 fpu_exception   : yes
 cpuid level : 11
 wp  : yes
 flags   : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca
 cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx rdtscp lm
 constant_tsc arch_perfmon pebs bts xtopology tsc_reliable nonstop_tsc
 aperfmperf unfair_spinlock pni ssse3 cx16 sse4_1 sse4_2 popcnt hypervisor
 lahf_lm ida arat epb pln pts dts
 bogomips: 5800.00
 clflush size: 64
 cache_alignment : 64
 address sizes   : 40 bits physical, 48 bits virtual
 power management:

 As far as scenario: it's a mixture of REGISTER/MESSAGE/SUBSCRIBE/NOTIFY.
 I will send logs (configs + /var/log/messages) privately .. but generally
 speaking config is almost identical with configs from samples directory for
 p-cscf.

 Dan



 On 03/03/2014 04:02 PM, Jason Penton wrote:

 Hi Daniel,

  no we have not seen that... Can you provide details around the scenario
 - registration, calling, mixture, etc? Load? We have done extensive testing
 especially w.r.t. memory usage so I am very interested in this. Could you
 do a memory dump and send us the log?

  Also, will you share your cfg file? you can send the cfg file directly
 to me if you prefer...

  Cheers
 Jason


 On Mon, Mar 3, 2014 at 10:58 PM, Daniel Ciprus daniel.cip...@acision.com
  wrote:

 Hi,

 Has anybody seen this :

 Mar  2 17:25:16 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2011]: generate_res_buf_from_sip_res(): *out of mem*
 Mar  2 17:25:16 kamailio kam-pcscf[20741]: ERROR: tm [t_reply.c:1943]:
 relay_reply(): ERROR: relay_reply: no mem for outbound reply buffer

 followed by:

 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2011]: generate_res_buf_from_sip_res(): *out of mem*
 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: tm [t_reply.c:1943]:
 relay_reply(): ERROR: relay_reply: no mem for outbound reply buffer
 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2168]: build_res_buf_from_sip_req(): *ERROR:
 build_res_buf_from_sip_req: out of memory  ; needs 386*

 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/contact.c:194]: parse_contacts(): parse_contacts(): *No
 memory left*
 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/parse_contact.c:59]: contact_parser(): contact_parser():
 Error while parsing contacts
 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/parse_contact.c:88]: parse_contact(): parse_contact():
 Error while parsing


 However, seems like we still had enough mem:

 [root@kamailio kamailio]# vmstat 1
 procs ---memory-- ---swap-- -io --system--
 -cpu-
  r  b   swpd   free   buff  cache   si   sobibo   in   cs us sy
 id wa st
  3  0  0 9526348 230308 1328247200 0 401  6
 0 94  0  0
  1  0  0 9526216 230308 1328252400 0 0 1313 84424
 17  8 75  0  0
  1  0  0 9526092 230308 1328261600 0 0 1482 86882
 16  9 75  0  0

 [root@kamailio monit.d]# kamailio -v
 version: kamailio 4.2.0-dev0 (x86_64/linux)
 flags: STATS: Off, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS,
 DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC,
 DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE,
 USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
 ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB
 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
 id: unknown

Re: [SR-Users] p-cscf - out of mem

[Jason Penton]

Great. Keep us posted

--
Sent using my phone and may be brief, to the point or contain typos
--
On Mar 7, 2014 6:49 PM, Daniel Ciprus daniel.cip...@acision.com wrote:

  Binaries which I'm running are older than this commit, that's for sure.
 Thanks, I will upgrade as soon as I can.


 On 03/07/2014 10:21 AM, Jason Penton wrote:

 Hey Daniel,

  Please check this commit. I think you are running before this was added?

  commit 1d6b1d8765d7a6d21c291d2076a3a80a1710c11c
 Author: Jason Penton jason.pen...@gmail.com
 Date:   Fri Feb 14 09:57:45 2014 +0200

  lib/ims:modules/ims_charging,ims_icscf,ims_qos,ims_registrar_scscf:
 fixed pkg_mem leak
 - fixed leak when parsing msg headers on a shm msg
 - instead now pass in flag to say if parsing is on shm_msg or not
 (is_shm)
 - assumes all common headers are already parsed before pkg_mem msg
 is cloned


  Cheers
 Jason


 On Mon, Mar 3, 2014 at 11:22 PM, Jason Penton 
 jason.pen...@smilecoms.comwrote:

 Thanks Daniel,

  How much pkg and shm memory is assigned to your Kamailio instance?
 Also, how many users are you registering concurrently? Please also recreate
 and dump shm memory when you get a chance. If you are not sure how to dump
 shm memory - see here -
 http://www.kamailio.org/dokuwiki/doku.php/troubleshooting:memory

  Cheers
  Jason


 On Mon, Mar 3, 2014 at 11:07 PM, Daniel Ciprus daniel.cip...@acision.com
  wrote:

 Jason,

 HW configuration : this is a virtual machine running 4 cores with 24GB
 ram (VM hosting).

 processor   : 3
 vendor_id   : GenuineIntel
 cpu family  : 6
 model   : 26
 model name  : Intel(R) Xeon(R) CPU E5-2667 0 @ 2.90GHz
 stepping: 4
 cpu MHz : 2900.000
 cache size  : 15360 KB
 fpu : yes
 fpu_exception   : yes
 cpuid level : 11
 wp  : yes
 flags   : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca
 cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx rdtscp lm
 constant_tsc arch_perfmon pebs bts xtopology tsc_reliable nonstop_tsc
 aperfmperf unfair_spinlock pni ssse3 cx16 sse4_1 sse4_2 popcnt hypervisor
 lahf_lm ida arat epb pln pts dts
 bogomips: 5800.00
 clflush size: 64
 cache_alignment : 64
 address sizes   : 40 bits physical, 48 bits virtual
 power management:

 As far as scenario: it's a mixture of REGISTER/MESSAGE/SUBSCRIBE/NOTIFY.
 I will send logs (configs + /var/log/messages) privately .. but generally
 speaking config is almost identical with configs from samples directory for
 p-cscf.

 Dan



 On 03/03/2014 04:02 PM, Jason Penton wrote:

  Hi Daniel,

  no we have not seen that... Can you provide details around the
 scenario - registration, calling, mixture, etc? Load? We have done
 extensive testing especially w.r.t. memory usage so I am very interested in
 this. Could you do a memory dump and send us the log?

  Also, will you share your cfg file? you can send the cfg file directly
 to me if you prefer...

  Cheers
 Jason


 On Mon, Mar 3, 2014 at 10:58 PM, Daniel Ciprus 
 daniel.cip...@acision.com wrote:

 Hi,

 Has anybody seen this :

 Mar  2 17:25:16 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2011]: generate_res_buf_from_sip_res(): *out of mem*
 Mar  2 17:25:16 kamailio kam-pcscf[20741]: ERROR: tm [t_reply.c:1943]:
 relay_reply(): ERROR: relay_reply: no mem for outbound reply buffer

 followed by:

 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2011]: generate_res_buf_from_sip_res(): *out of mem*
 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: tm [t_reply.c:1943]:
 relay_reply(): ERROR: relay_reply: no mem for outbound reply buffer
 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2168]: build_res_buf_from_sip_req(): *ERROR:
 build_res_buf_from_sip_req: out of memory  ; needs 386*

 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/contact.c:194]: parse_contacts(): parse_contacts(): *No
 memory left*
 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/parse_contact.c:59]: contact_parser(): contact_parser():
 Error while parsing contacts
 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/parse_contact.c:88]: parse_contact(): parse_contact():
 Error while parsing


 However, seems like we still had enough mem:

 [root@kamailio kamailio]# vmstat 1
 procs ---memory-- ---swap-- -io --system--
 -cpu-
  r  b   swpd   free   buff  cache   si   sobibo   in   cs us sy
 id wa st
  3  0  0 9526348 230308 1328247200 0 401
 6  0 94  0  0
  1  0  0 9526216 230308 1328252400 0 0 1313 84424
 17  8 75  0  0
  1  0  0 9526092 230308 1328261600 0 0 1482 86882
 16  9 75  0  0

 [root@kamailio monit.d]# kamailio -v
 version: kamailio 4.2.0-dev0 (x86_64/linux)
 flags: STATS: Off, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS,
 DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP

Re: [SR-Users] p-cscf - out of mem

[Jason Penton]

Hi Daniel,

no we have not seen that... Can you provide details around the scenario -
registration, calling, mixture, etc? Load? We have done extensive testing
especially w.r.t. memory usage so I am very interested in this. Could you
do a memory dump and send us the log?

Also, will you share your cfg file? you can send the cfg file directly to
me if you prefer...

Cheers
Jason


On Mon, Mar 3, 2014 at 10:58 PM, Daniel Ciprus daniel.cip...@acision.comwrote:

  Hi,

 Has anybody seen this :

 Mar  2 17:25:16 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2011]: generate_res_buf_from_sip_res(): *out of mem*
 Mar  2 17:25:16 kamailio kam-pcscf[20741]: ERROR: tm [t_reply.c:1943]:
 relay_reply(): ERROR: relay_reply: no mem for outbound reply buffer

 followed by:

 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2011]: generate_res_buf_from_sip_res(): *out of mem*
 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: tm [t_reply.c:1943]:
 relay_reply(): ERROR: relay_reply: no mem for outbound reply buffer
 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2168]: build_res_buf_from_sip_req(): *ERROR:
 build_res_buf_from_sip_req: out of memory  ; needs 386*

 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/contact.c:194]: parse_contacts(): parse_contacts(): *No
 memory left*
 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/parse_contact.c:59]: contact_parser(): contact_parser():
 Error while parsing contacts
 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/parse_contact.c:88]: parse_contact(): parse_contact():
 Error while parsing


 However, seems like we still had enough mem:

 [root@kamailio kamailio]# vmstat 1
 procs ---memory-- ---swap-- -io --system--
 -cpu-
  r  b   swpd   free   buff  cache   si   sobibo   in   cs us sy id
 wa st
  3  0  0 9526348 230308 1328247200 0 401  6  0
 94  0  0
  1  0  0 9526216 230308 1328252400 0 0 1313 84424 17
 8 75  0  0
  1  0  0 9526092 230308 1328261600 0 0 1482 86882 16
 9 75  0  0

 [root@kamailio monit.d]# kamailio -v
 version: kamailio 4.2.0-dev0 (x86_64/linux)
 flags: STATS: Off, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS,
 DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC,
 DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE,
 USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
 ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB
 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
 id: unknown
 compiled on 17:42:42 Dec 18 2013 with gcc 4.4.7

 Unfortunately I had to reload p-cscf to get service working again.

 --
 *Daniel Ciprus*
 Integration engineer
 http://www.acision.com

 9954 Mayland Dr
 Suite 3100
 Richmond, VA 23233
 USA
 T: +1 804 762 5601
 E: daniel.cip...@acision.com

 --
 This e-mail and any attachment is for authorised use by the intended
 recipient(s) only. It may contain proprietary material, confidential
 information and/or be subject to legal privilege. It should not be copied,
 disclosed to, retained or used by, any other party. If you are not an
 intended recipient then please promptly delete this e-mail and any
 attachment and all copies and inform the sender. Thank you for
 understanding.


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] p-cscf - out of mem

[Jason Penton]

Thanks Daniel,

How much pkg and shm memory is assigned to your Kamailio instance? Also,
how many users are you registering concurrently? Please also recreate and
dump shm memory when you get a chance. If you are not sure how to dump shm
memory - see here -
http://www.kamailio.org/dokuwiki/doku.php/troubleshooting:memory

Cheers
Jason


On Mon, Mar 3, 2014 at 11:07 PM, Daniel Ciprus daniel.cip...@acision.comwrote:

  Jason,

 HW configuration : this is a virtual machine running 4 cores with 24GB ram
 (VM hosting).

 processor   : 3
 vendor_id   : GenuineIntel
 cpu family  : 6
 model   : 26
 model name  : Intel(R) Xeon(R) CPU E5-2667 0 @ 2.90GHz
 stepping: 4
 cpu MHz : 2900.000
 cache size  : 15360 KB
 fpu : yes
 fpu_exception   : yes
 cpuid level : 11
 wp  : yes
 flags   : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca
 cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx rdtscp lm
 constant_tsc arch_perfmon pebs bts xtopology tsc_reliable nonstop_tsc
 aperfmperf unfair_spinlock pni ssse3 cx16 sse4_1 sse4_2 popcnt hypervisor
 lahf_lm ida arat epb pln pts dts
 bogomips: 5800.00
 clflush size: 64
 cache_alignment : 64
 address sizes   : 40 bits physical, 48 bits virtual
 power management:

 As far as scenario: it's a mixture of REGISTER/MESSAGE/SUBSCRIBE/NOTIFY. I
 will send logs (configs + /var/log/messages) privately .. but generally
 speaking config is almost identical with configs from samples directory for
 p-cscf.

 Dan



 On 03/03/2014 04:02 PM, Jason Penton wrote:

 Hi Daniel,

  no we have not seen that... Can you provide details around the scenario
 - registration, calling, mixture, etc? Load? We have done extensive testing
 especially w.r.t. memory usage so I am very interested in this. Could you
 do a memory dump and send us the log?

  Also, will you share your cfg file? you can send the cfg file directly
 to me if you prefer...

  Cheers
 Jason


 On Mon, Mar 3, 2014 at 10:58 PM, Daniel Ciprus 
 daniel.cip...@acision.comwrote:

 Hi,

 Has anybody seen this :

 Mar  2 17:25:16 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2011]: generate_res_buf_from_sip_res(): *out of mem*
 Mar  2 17:25:16 kamailio kam-pcscf[20741]: ERROR: tm [t_reply.c:1943]:
 relay_reply(): ERROR: relay_reply: no mem for outbound reply buffer

 followed by:

 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2011]: generate_res_buf_from_sip_res(): *out of mem*
 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: tm [t_reply.c:1943]:
 relay_reply(): ERROR: relay_reply: no mem for outbound reply buffer
 Mar  2 17:27:03 kamailio kam-pcscf[20741]: ERROR: core
 [msg_translator.c:2168]: build_res_buf_from_sip_req(): *ERROR:
 build_res_buf_from_sip_req: out of memory  ; needs 386*

 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/contact.c:194]: parse_contacts(): parse_contacts(): *No
 memory left*
 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/parse_contact.c:59]: contact_parser(): contact_parser():
 Error while parsing contacts
 Mar  2 17:27:53 kamailio kam-pcscf[20741]: ERROR: core
 [parser/contact/parse_contact.c:88]: parse_contact(): parse_contact():
 Error while parsing


 However, seems like we still had enough mem:

 [root@kamailio kamailio]# vmstat 1
 procs ---memory-- ---swap-- -io --system--
 -cpu-
  r  b   swpd   free   buff  cache   si   sobibo   in   cs us sy
 id wa st
  3  0  0 9526348 230308 1328247200 0 401  6
 0 94  0  0
  1  0  0 9526216 230308 1328252400 0 0 1313 84424 17
 8 75  0  0
  1  0  0 9526092 230308 1328261600 0 0 1482 86882 16
 9 75  0  0

 [root@kamailio monit.d]# kamailio -v
 version: kamailio 4.2.0-dev0 (x86_64/linux)
 flags: STATS: Off, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS,
 DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC,
 DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE,
 USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
 ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB
 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
 id: unknown
 compiled on 17:42:42 Dec 18 2013 with gcc 4.4.7

 Unfortunately I had to reload p-cscf to get service working again.

 --
 *Daniel Ciprus*
 Integration engineer
 http://www.acision.com

 9954 Mayland Dr
 Suite 3100
 Richmond, VA 23233
 USA
 T: +1 804 762 5601
 E: daniel.cip...@acision.com

 --
 This e-mail and any attachment is for authorised use by the intended
 recipient(s) only. It may contain proprietary material, confidential
 information and/or be subject to legal privilege. It should not be copied,
 disclosed to, retained or used by, any other party. If you are not an
 intended recipient then please promptly

Re: [SR-Users] Replacing an ACME Packet Net-Net SBC

[Jason Penton]

I'm curious re. your statement about P-CSCF. What does LI and transcoding
have to do with Kamailio? As already mentioned these functions are
available only in B2BUA which Kamailio is *not*. What other issues then did
you have with P-CSCF impl. using Kamailio. Also, how did P-CSCF even get
into this thread?

sarcasmBTW, you forgot to mention the awesome price of Acme in your
comparison to other alternatives/sarcasm ;)




On Fri, Feb 28, 2014 at 11:21 AM, Luis Silva luisfilsi...@gmail.com wrote:

 Hi Melanie,

 Now I'm curious about which tests are you mentioning. Also, Acme
 Packet/Oracle as many different SBCs models, which can be selected
 according with the customer's requirements.
 When talking about the infinite number of features I wasn't really
 thinking in H.323. Although, probably there were customers like you a
 couple of years ago that thought they wouldn't need some features and
 regret they didn't pick Acme Packet, after they received new requirements
 on their networks. Acme SBC can also route using any SIP message element.
 Just use an HMR and according with what you want, just add a Route header
 (as simple as that... :) ).
 Regarding traffic shaping, you can also do it based on media-profiles.
 Comparing traffic shaping with Acme Packet DoS protection doesn't make much
 sense. Their DoS is one of the features that made their SBC what it is now,
 the leader worldwide. And do you know what it means? It is tested against
 any tool out there performing attacks (more customers means more testing).
 Can you say the same about the ABC demo?
 One additional thing is that you can for sure say that when deploying a
 Acme Packet SBC you won't have issues interoperate with other vendors. This
 is not marketing material, again this is based on the number of
 customers/deployments that exists worldwide.
 Not to mention real HA (out-of-the-box), simple configuration (yeah, I've
 already implemented an P-CSCF using Kamailio and it was a mess...),
 transcoding, LI, etc.

 Hope it helps,
 Luis


 On Thu, Feb 27, 2014 at 5:33 PM, Melanie Pietersen 
 melanie.pietersen...@gmail.com wrote:

 On 2/27/14 10:29 AM, Luis Silva wrote:

 Don't understand how is it possible to compare Kamailio with the Acme
 Packet SBC. Just to give an example, the DoS mechanism available on the AP
 SBC can't be
  compared with any other solution available on the market. You will also
 have HMRs, SIP Routing options out-of-the-box (like time of the day
 routing, sip
 method based, cost based, traffic classification based, lb, trunk group,
 enum,lrt, multistage, route header based, redirect, etc etc) and infinite
 number of
 features that you will for sure miss if you plan on making that
 replacement.


 Hi Luis,

 the acme product seems actually underperforming compared to Wladimir's
 SBC demo and measured by the technical capabilities I am interested in.

 What continues to confuse me is the apparent mixture of technical and
 marketing terms. The infinite number is respectably long but it includes
  many features I will not need like H.323 or appear to be marketing. For
 example it appears that ABC demo can route by any SIP message element,
 which is clearly superior and necessary, especially in a deployment with
 proprietary header fields. Even if it does not make such a long
 element-by-element feature list :). Similarly it includes several types of
 traffic shaping, which seems little different from the DoS protection
 offered by former Acme. Acme's multistage lookup you mentioned seems to be
 just a fix to quite imperfect design which didn't anticipate cascaded
 routing logic. I mean I am a little bit careful about assessing
 technological supremacy based on marketing material.

 Is there possibly some truly technical-based comparison? I tried to look
 it up in the archive but did not find some.

 Melanie


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] kamailio crashes

[Jason Penton]

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

-- 


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/home/email-disclaimer/ 
http://www.smilecoms.com/disclaimer


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Using Kamailio as a websocket LB

[Jason Penton]

Haproxy also very powerful for this

---
This mail was sent using my phone and may be brief, to the point, or
contain typos
---
On 21 Feb 2014 19:29, Peter Dunkley peter.dunk...@crocodilertc.net
wrote:

 No that is not currently possible.  Kamailio is not an HTTP load-balancer.

 If you want a WebSocket load-balancer I suggest you look at NGiNX.

 Regards,

 Peter


 On 21 February 2014 10:13, Luis Silva luisfilsi...@gmail.com wrote:

 Hi guys,

 Is it possible to use Kamailio as a Websocket LoadBalancer (transparent
 to the Websocket content, rather it's SIP or other protocol)?

 Many thanks,
 Luís

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --
 Peter Dunkley
 Technical Director
 Crocodile RCS Ltd

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] FW: Regd. t_suspend() and t_continue()

[Jason Penton]

Hi Shankar,

I will setup and test case and try to reproduce as soon as I can. I suspect
I will be able to get back to you early next week only

Cheers
Jason


On Thu, Jan 23, 2014 at 8:48 AM, Shankar shankar...@plintron.com wrote:

 Hi,



 From our repeated load tests what we can conclude irrespective of the
 number of simultaneous calls, there is always this error “t_continue:
 transaction not found” occurring.



 If I run say 20 cps, then after running 5000 calls, we observe exactly 20
 calls failing with the above error. We doubt that there is something
 happening during a particular point in time (for a second) which impacts
 the saving of those new transactions into shared memory.



 For 10 cps run, we observe exactly 10 call failures. We repeated with
 different cps and found that error is exactly equal to the cps being run.



 Any configuration we are missing. Anyone can help?



 Regards,

 Shankar



 *From:* Shankar [mailto:shankar...@plintron.com]
 *Sent:* Tuesday, January 21, 2014 3:09 PM
 *To:* 'Jason Penton'; 'SIP Router - Kamailio (OpenSER) and SIP Express
 Router (SER) - Users Mailing List'
 *Subject:* FW: [SR-Users] FW: Regd. t_suspend() and t_continue()



 Hi Jason,



 Below is our config,



 route[LOCATION] {

if(is_method(INVITE))

 {

 if(!route(FROMCSCF))

 {

 setflag(FLT_ACC);

 setflag(FLT_ACCFAILED);

 dlg_manage();

 dlg_setflag(4);



 async_route(RESUME, 1);



 exit;

 }

 }

 }



 route[RESUME]

 {

 route(TO_LOCATION);// here t_relay to REGISTRAR is
 done for user lookup.

 exit;

 }



 Regards,

 Shankar





 Date: Tue, 21 Jan 2014 11:14:21 +0200

 From: Jason Penton jason.pen...@smilecoms.com

 To: Kamailio (SER) - Users Mailing List

   sr-users@lists.sip-router.org

 Subject: Re: [SR-Users] FW: Regd. t_suspend() and t_continue()

 Message-ID:

   CAE=KcrghqJHgnGDxqS1fYvUzM=hqrackwfeasnjjm8xudcq...@mail.gmail.com

 Content-Type: text/plain; charset=iso-8859-1



 We use it heavily, but not using the async module - we use it directly
 from the IMS code.



 Can you please provide your config (or a relevant snippet) file so I can
 see what exactly you are testing/trying to do



 Cheers

 jason



 *From:* Shankar [mailto:shankar...@plintron.com shankar...@plintron.com]

 *Sent:* Tuesday, January 21, 2014 2:25 PM
 *To:* 'SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
 Users Mailing List'
 *Subject:* RE: [SR-Users] FW: Regd. t_suspend() and t_continue()



 Hi,



 Anyone who had used t_suspend() and t_continue() can share the performance
 details?



 I tried async module with one sec sleep time. I tried only 5 calls per
 second but still it was not successful. After sometime I see below logs,



 Jan 21 13:51:55 PLT-RA-RD-W167A PCscf[16520]: ERROR: tm [t_suspend.c:128]:
 t_continue(): ERROR: t_continue: transaction not found

 Jan 21 13:52:49 PLT-RA-RD-W167A last message repeated 15 times

 Jan 21 13:59:38 PLT-RA-RD-W167A last message repeated 12 times

 Jan 21 14:13:03 PLT-RA-RD-W167A last message repeated 5 times



 Any configuration changes can help here?



 Regards,

 Shankar



 *From:* Shankar [mailto:shankar...@plintron.com shankar...@plintron.com]

 *Sent:* Wednesday, January 15, 2014 1:26 PM
 *To:* 'Jason Penton'
 *Cc:* 'SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
 Users Mailing List'
 *Subject:* RE: [SR-Users] FW: Regd. t_suspend() and t_continue()



 Hi Jason,



 I am using 4.0.2



 Regards,

 Shankar



 *From:* Jason Penton 
 [mailto:jason.pen...@smilecoms.comjason.pen...@smilecoms.com]

 *Sent:* Wednesday, January 15, 2014 1:21 PM
 *To:* Shankar
 *Cc:* SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
 Users Mailing List
 *Subject:* Re: [SR-Users] FW: Regd. t_suspend() and t_continue()



 Hi Shankar,



 What version of Kamailio are you running? Kamailio -V



 Cheers

 Jason



 On Wed, Jan 15, 2014 at 6:58 AM, Shankar shankar...@plintron.com wrote:

 Hi Jason,



 Please find below my response inline,





 I have some questions for you as we have used suspend/continue quite a lot
 in the IMS code and don't have any leaks.



 Firstly, why are you using pkg_mem for your hash_id and label? Remember
 that you will be in 2 different processes in the suspend and continue
 portions of the code... so pkg_mem will not work - you should use shm_mem
 instead.



 [Shankar] We use pkg_mem because we are invoking t_continue from the same
 process ( using thread ).



 Secondly, how are you using top to tell that you have a leak? Kamailio's
 memory is internally managed.



 [Shankar] After running for say 20minutes, we get out of shared memory
 error. Also in top output we observed incremental increase in the shared
 usage of shared memory for the process

Re: [SR-Users] FW: Regd. t_suspend() and t_continue()

[Jason Penton]

We use it heavily, but not using the async module - we use it directly from
the IMS code.

Can you please provide your config (or a relevant snippet) file so I can
see what exactly you are testing/trying to do

Cheers
jason


On Tue, Jan 21, 2014 at 10:54 AM, Shankar shankar...@plintron.com wrote:

 Hi,



 Anyone who had used t_suspend() and t_continue() can share the performance
 details?



 I tried async module with one sec sleep time. I tried only 5 calls per
 second but still it was not successful. After sometime I see below logs,



 Jan 21 13:51:55 PLT-RA-RD-W167A PCscf[16520]: ERROR: tm [t_suspend.c:128]:
 t_continue(): ERROR: t_continue: transaction not found

 Jan 21 13:52:49 PLT-RA-RD-W167A last message repeated 15 times

 Jan 21 13:59:38 PLT-RA-RD-W167A last message repeated 12 times

 Jan 21 14:13:03 PLT-RA-RD-W167A last message repeated 5 times



 Any configuration changes can help here?



 Regards,

 Shankar



 *From:* Shankar [mailto:shankar...@plintron.com]
 *Sent:* Wednesday, January 15, 2014 1:26 PM
 *To:* 'Jason Penton'

 *Cc:* 'SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
 Users Mailing List'
 *Subject:* RE: [SR-Users] FW: Regd. t_suspend() and t_continue()



 Hi Jason,



 I am using 4.0.2



 Regards,

 Shankar



 *From:* Jason Penton 
 [mailto:jason.pen...@smilecoms.comjason.pen...@smilecoms.com]

 *Sent:* Wednesday, January 15, 2014 1:21 PM
 *To:* Shankar
 *Cc:* SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
 Users Mailing List
 *Subject:* Re: [SR-Users] FW: Regd. t_suspend() and t_continue()



 Hi Shankar,



 What version of Kamailio are you running? Kamailio -V



 Cheers

 Jason



 On Wed, Jan 15, 2014 at 6:58 AM, Shankar shankar...@plintron.com wrote:

 Hi Jason,



 Please find below my response inline,





 I have some questions for you as we have used suspend/continue quite a lot
 in the IMS code and don't have any leaks.



 Firstly, why are you using pkg_mem for your hash_id and label? Remember
 that you will be in 2 different processes in the suspend and continue
 portions of the code... so pkg_mem will not work - you should use shm_mem
 instead.



 [Shankar] We use pkg_mem because we are invoking t_continue from the same
 process ( using thread ).



 Secondly, how are you using top to tell that you have a leak? Kamailio's
 memory is internally managed.



 [Shankar] After running for say 20minutes, we get out of shared memory
 error. Also in top output we observed incremental increase in the shared
 usage of shared memory for the process.



 Cheers

 Jason





 On Mon, Jan 13, 2014 at 1:29 PM, Shankar shankar...@plintron.com wrote:



  Re-sending without the attachment.

 

 

 

  *From:* Shankar [mailto:shankar...@plintron.comshankar...@plintron.com
 ]

  *Sent:* Monday, January 13, 2014 4:57 PM

  *To:* 'sr-users@lists.sip-router.org'

  *Subject:* Regd. t_suspend() and t_continue()

 

 

 

  Hi,

 

 

 

  We are trying out the t_suspend() and t_continue() in our test setup.

  We are facing memory leak ( both shm and pkg as per top command results).

 

 

 

  Please find below the scenario,

 

 

 

  1)  Do a t_newtran()

 

  2)  Allocate pkg memory for hashid and label.

 

  3)  Call t_suspend()

 

  4)  Do t_continue() when async result is available

 

  5)  De-allocate pkg memory reserved for hashid and label

 

  6)  Do a t_relay() which forwards the sip message to another sip
 node.

 

 

 

  In the  step (6) above, we see t_newtran() allocates one more time

  shared memory for the same transaction.

 

 

 

  We tried t_release() after step (4) to release the transaction as

  t_relay() anyways allocates new shared memory. Nothing helped.

 

 

 

  Please let me know what are the logs you would require to debug the same.

  I am attaching syslog for this run.

 

 

 

  Regards,

 

  Shankar







 --



 *Jason Penton*

 *Senior Manager: Applications and Services*

 *Smile Communications Pty (Ltd)*

 *Mobile:*

 +27 (0) 83 283 7000

 *Skype:*

 jason.barry.penton

 jason.pen...@smilecoms.com name.surn...@smilecoms.com

 www.smilecoms.com



 This email is subject to the disclaimer of Smile Communications at 
 http://www.smilecoms.com/disclaimer








 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi

Re: [SR-Users] Fwd: kamailio-4.1.1 avp issue within failure routes

[Jason Penton]

Hi Jose,

Are you using any async functions in your config file? Or is this just
standard failure route handling?

Cheers
Jason


On Fri, Jan 10, 2014 at 4:28 PM, José Seabra joseseab...@gmail.com wrote:

 Hello Daniel,

 Please check the attachment.

 The calls is started for number  3001 from number 2...@admin.com, then
 kamailio change it to device 2...@admin.com, the avp's that i use  in
 failure route is :

 $avp(s:account_id)
 $avp(s:originalru)
 $avp(s:cf_action_id)

 If do you need more information please let me know.

 Thank you


 2014/1/10 Daniel-Constantin Mierla mico...@gmail.com

 Hello,

 can you get the log messages with debug=3 (from the moment the INVITE
 comes in till the end of the transaction)?

 Cheers,
 Daniel


 On 10/01/14 13:20, José Seabra wrote:

 Hi there,
 I upgraded my kamailio server from version 4.0.1 to 4.1.1, then i
 noticed that all my AVP's variavels that are initialized on initial
 INVITE, are all set as null when call goes to failure route, so kamailio
 is not keeping the variavel values for same call(dialog)

 When it happens i see the following warning WARNING: tm
 [t_lookup.c:1536]: t_unref(): WARNING: script writer didn't release
 transaction


 Thanks for your help

 --
 Regards
 José Seabra


 --
 Daniel-Constantin Mierla - http://www.asipto.com
 http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda




 --
 Cumprimentos
 José Seabra



 --
 Cumprimentos
 José Seabra

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Fwd: kamailio-4.1.1 avp issue within failure routes

[Jason Penton]

Ok, that makes sense. I have made a patch. I am just going to do some tests
to confirm all is okay and then will push to master. If your tests on
master are successful we will back-port.

Cheers
Jason


On Thu, Jan 16, 2014 at 12:36 PM, José Seabra joseseab...@gmail.com wrote:

 Hello Jason,
 Yes i'm using async sleep function, within my failure route.

 Regards



 2014/1/16 Jason Penton jason.pen...@smilecoms.com

 Hi Jose,

 Are you using any async functions in your config file? Or is this just
 standard failure route handling?

 Cheers
 Jason


 On Fri, Jan 10, 2014 at 4:28 PM, José Seabra joseseab...@gmail.comwrote:

 Hello Daniel,

 Please check the attachment.

 The calls is started for number  3001 from number 2...@admin.com, then
 kamailio change it to device 2...@admin.com, the avp's that i use  in
 failure route is :

 $avp(s:account_id)
 $avp(s:originalru)
 $avp(s:cf_action_id)

 If do you need more information please let me know.

 Thank you


 2014/1/10 Daniel-Constantin Mierla mico...@gmail.com

 Hello,

 can you get the log messages with debug=3 (from the moment the INVITE
 comes in till the end of the transaction)?

 Cheers,
 Daniel


 On 10/01/14 13:20, José Seabra wrote:

 Hi there,
 I upgraded my kamailio server from version 4.0.1 to 4.1.1, then i
 noticed that all my AVP's variavels that are initialized on initial
 INVITE, are all set as null when call goes to failure route, so kamailio
 is not keeping the variavel values for same call(dialog)

 When it happens i see the following warning WARNING: tm
 [t_lookup.c:1536]: t_unref(): WARNING: script writer didn't release
 transaction


 Thanks for your help

 --
 Regards
 José Seabra


 --
 Daniel-Constantin Mierla - http://www.asipto.com
 http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda




 --
 Cumprimentos
 José Seabra



 --
 Cumprimentos
 José Seabra

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --

  *Jason Penton**Senior Manager: Applications and Services* *Smile
 Communications Pty (Ltd)* *Mobile:* +27 (0) 83 283 7000 
 *Skype:*jason.barry.penton
 jason.pen...@smilecoms.com name.surn...@smilecoms.com www.smilecoms.com


  This email is subject to the disclaimer of Smile Communications at 
 http://www.smilecoms.com/disclaimer


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --
 Cumprimentos
 José Seabra

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Fwd: kamailio-4.1.1 avp issue within failure routes

[Jason Penton]

Hi Jose,

I've just pushed a patch to master. Please can you test and get back to me.

Cheers
Jason


On Thu, Jan 16, 2014 at 12:39 PM, Jason Penton
jason.pen...@smilecoms.comwrote:

 Ok, that makes sense. I have made a patch. I am just going to do some
 tests to confirm all is okay and then will push to master. If your tests on
 master are successful we will back-port.

 Cheers
 Jason


 On Thu, Jan 16, 2014 at 12:36 PM, José Seabra joseseab...@gmail.comwrote:

 Hello Jason,
 Yes i'm using async sleep function, within my failure route.

 Regards



 2014/1/16 Jason Penton jason.pen...@smilecoms.com

 Hi Jose,

 Are you using any async functions in your config file? Or is this just
 standard failure route handling?

 Cheers
 Jason


 On Fri, Jan 10, 2014 at 4:28 PM, José Seabra joseseab...@gmail.comwrote:

 Hello Daniel,

 Please check the attachment.

 The calls is started for number  3001 from number 2...@admin.com, then
 kamailio change it to device 2...@admin.com, the avp's that i use  in
 failure route is :

 $avp(s:account_id)
 $avp(s:originalru)
 $avp(s:cf_action_id)

 If do you need more information please let me know.

 Thank you


 2014/1/10 Daniel-Constantin Mierla mico...@gmail.com

 Hello,

 can you get the log messages with debug=3 (from the moment the INVITE
 comes in till the end of the transaction)?

 Cheers,
 Daniel


 On 10/01/14 13:20, José Seabra wrote:

 Hi there,
 I upgraded my kamailio server from version 4.0.1 to 4.1.1, then i
 noticed that all my AVP's variavels that are initialized on initial
 INVITE, are all set as null when call goes to failure route, so 
 kamailio
 is not keeping the variavel values for same call(dialog)

 When it happens i see the following warning WARNING: tm
 [t_lookup.c:1536]: t_unref(): WARNING: script writer didn't release
 transaction


 Thanks for your help

 --
 Regards
 José Seabra


 --
 Daniel-Constantin Mierla - http://www.asipto.com
 http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda




 --
 Cumprimentos
 José Seabra



 --
 Cumprimentos
 José Seabra

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --

  *Jason Penton**Senior Manager: Applications and Services* *Smile
 Communications Pty (Ltd)* *Mobile:* +27 (0) 83 283 7000 
 *Skype:*jason.barry.penton
 jason.pen...@smilecoms.com name.surn...@smilecoms.com
 www.smilecoms.com


  This email is subject to the disclaimer of Smile Communications at 
 http://www.smilecoms.com/disclaimer


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --
 Cumprimentos
 José Seabra

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --

  *Jason Penton**Senior Manager: Applications and Services* *Smile
 Communications Pty (Ltd)* *Mobile:* +27 (0) 83 283 
 7000*Skype:*jason.barry.penton
 jason.pen...@smilecoms.com name.surn...@smilecoms.com www.smilecoms.com





-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Fwd: kamailio-4.1.1 avp issue within failure routes

[Jason Penton]

Great! Thanks Jose!

I will ask Daniel to back-port. Daniel, when you get a chance can you
back-port please? ;)

Cheers
Jason


On Thu, Jan 16, 2014 at 4:46 PM, José Seabra joseseab...@gmail.com wrote:

 Hi Jason,

 I tested your patch and it is working well.

 Thank you

 Regards


 2014/1/16 Jason Penton jason.pen...@smilecoms.com

 Hi Jose,

 I've just pushed a patch to master. Please can you test and get back to
 me.

 Cheers
 Jason


 On Thu, Jan 16, 2014 at 12:39 PM, Jason Penton 
 jason.pen...@smilecoms.com wrote:

 Ok, that makes sense. I have made a patch. I am just going to do some
 tests to confirm all is okay and then will push to master. If your tests on
 master are successful we will back-port.

 Cheers
 Jason


 On Thu, Jan 16, 2014 at 12:36 PM, José Seabra joseseab...@gmail.comwrote:

 Hello Jason,
 Yes i'm using async sleep function, within my failure route.

 Regards



 2014/1/16 Jason Penton jason.pen...@smilecoms.com

 Hi Jose,

 Are you using any async functions in your config file? Or is this just
 standard failure route handling?

 Cheers
 Jason


 On Fri, Jan 10, 2014 at 4:28 PM, José Seabra joseseab...@gmail.comwrote:

 Hello Daniel,

 Please check the attachment.

 The calls is started for number  3001 from number 2...@admin.com,
 then kamailio change it to device 2...@admin.com, the avp's that i
 use  in failure route is :

 $avp(s:account_id)
 $avp(s:originalru)
 $avp(s:cf_action_id)

 If do you need more information please let me know.

 Thank you


 2014/1/10 Daniel-Constantin Mierla mico...@gmail.com

 Hello,

 can you get the log messages with debug=3 (from the moment the
 INVITE comes in till the end of the transaction)?

 Cheers,
 Daniel


 On 10/01/14 13:20, José Seabra wrote:

 Hi there,
 I upgraded my kamailio server from version 4.0.1 to 4.1.1, then i
 noticed that all my AVP's variavels that are initialized on initial
 INVITE, are all set as null when call goes to failure route, so 
 kamailio
 is not keeping the variavel values for same call(dialog)

 When it happens i see the following warning WARNING: tm
 [t_lookup.c:1536]: t_unref(): WARNING: script writer didn't release
 transaction


 Thanks for your help

 --
 Regards
 José Seabra


 --
 Daniel-Constantin Mierla - http://www.asipto.com
 http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda




 --
 Cumprimentos
 José Seabra



 --
 Cumprimentos
 José Seabra

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
 list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --

  *Jason Penton**Senior Manager: Applications and Services* *Smile
 Communications Pty (Ltd)* *Mobile:* +27 (0) 83 283 7000 
 *Skype:*jason.barry.penton
 jason.pen...@smilecoms.com name.surn...@smilecoms.com
 www.smilecoms.com


  This email is subject to the disclaimer of Smile Communications at 
 http://www.smilecoms.com/disclaimer


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --
 Cumprimentos
 José Seabra

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --

  *Jason Penton**Senior Manager: Applications and Services* *Smile
 Communications Pty (Ltd)* *Mobile:* +27 (0) 83 283 7000 
 *Skype:*jason.barry.penton
 jason.pen...@smilecoms.com name.surn...@smilecoms.com
 www.smilecoms.com





 --

 *Jason Penton**Senior Manager: Applications and Services* *Smile
 Communications Pty (Ltd)* *Mobile:* +27 (0) 83 283 7000 
 *Skype:*jason.barry.penton
 jason.pen...@smilecoms.com name.surn...@smilecoms.com www.smilecoms.com


  This email is subject to the disclaimer of Smile Communications at 
 http://www.smilecoms.com/disclaimer


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --
 Cumprimentos
 José Seabra

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip

Re: [SR-Users] FW: Regd. t_suspend() and t_continue()

[Jason Penton]

Hi,

I have some questions for you as we have used suspend/continue quite a lot
in the IMS code and don't have any leaks.

Firstly, why are you using pkg_mem for your hash_id and label? Remember
that you will be in 2 different processes in the suspend and continue
portions of the code... so pkg_mem will not work - you should use shm_mem
instead.

Secondly, how are you using top to tell that you have a leak? Kamailio's
memory is internally managed.

Cheers
Jason


On Mon, Jan 13, 2014 at 1:29 PM, Shankar shankar...@plintron.com wrote:

 Re-sending without the attachment.



 *From:* Shankar [mailto:shankar...@plintron.com]
 *Sent:* Monday, January 13, 2014 4:57 PM
 *To:* 'sr-users@lists.sip-router.org'
 *Subject:* Regd. t_suspend() and t_continue()



 Hi,



 We are trying out the t_suspend() and t_continue() in our test setup. We
 are facing memory leak ( both shm and pkg as per top command results).



 Please find below the scenario,



 1)  Do a t_newtran()

 2)  Allocate pkg memory for hashid and label.

 3)  Call t_suspend()

 4)  Do t_continue() when async result is available

 5)  De-allocate pkg memory reserved for hashid and label

 6)  Do a t_relay() which forwards the sip message to another sip node.



 In the  step (6) above, we see t_newtran() allocates one more time shared
 memory for the same transaction.



 We tried t_release() after step (4) to release the transaction as
 t_relay() anyways allocates new shared memory. Nothing helped.



 Please let me know what are the logs you would require to debug the same.
 I am attaching syslog for this run.



 Regards,

 Shankar





 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio IMS - VM

[Jason Penton]

Hi Bruno,

Unfortunately no ready-cooked VMs at the moment - although this would be a
good idea IMO (we just need to find some time ;) ).

Please ask questions and we will get back to you to get your environment
up. Being a student of IMS it's probably better for you to 'battle' to get
it up in the beginning so you understand how it fits together.

Cheers
Jason


On Mon, Dec 2, 2013 at 12:04 PM, Bruno Cruz bruno.c...@ua.pt wrote:

  Hello everyone,

  My name is Bruno, I'm a student from Portugal studying IMS at the
 moment. I've been following tutorials online, trying to get Kamailio to
 work as an IMS core - I'm pretty much a newbie in this field.

  Unfortunantly I've been getting several errors and I can't seem to
 properly configure everything. I was wondering if there is a All-in-One VM
 that can be downloaded, with Kamailio ready to be used as an IMS core?

  Thanks in advance. Best regards,

  Bruno C.

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 

*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com name.surn...@smilecoms.com
www.smilecoms.com

This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] proxy is not forwarding 180 ringing reply

[Jason Penton]

Apologies for this guys. This was our mistake. Thanks Daniel for resolving.
We will test the async replies in master today.

---
This mail was sent using my phone and may be brief, to the point, or
contain typos
---
On 24 Oct 2013 08:17, Daniel-Constantin Mierla mico...@gmail.com wrote:

 Hello,

 can you give a test to latest master branch? I pushed a patch there.

 Cheers,
 Daniel

 On 10/24/13 7:39 AM, Daniel-Constantin Mierla wrote:

 Hello,

 On 10/23/13 8:31 PM, Juha Heinanen wrote:

 in the test where reply is not relayed, i set flag 16:

  setflag(16);

 then see this:

 msg_parser.h:#define FL_RPL_SUSPENDED (116)  /* for async reply
 processing */

 could this explain what is happening?

 i have always thought that message flags can be freely used in the
 script.  is it now so that flag 16 is reserved for suspend/resume
 feature?

 if so, what other flags i'm not able to use in my script without
 messing everything up?

 Looks like a mistaken usage of the internal flags, FL_RPL_SUSPENDED being
 actually on the script flags. Script accessible flags should be always at
 the will of script writer.

 I will look over it.

 Cheers,
 Daniel


 -- juha

 __**_
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**usershttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 --
 Daniel-Constantin Mierla - http://www.asipto.com
 http://twitter.com/#!/miconda - 
 http://www.linkedin.com/in/**micondahttp://www.linkedin.com/in/miconda
 Kamailio Advanced Trainings - Berlin, Nov 25-28; Miami, Nov 18-20, 2013
   - more details about Kamailio trainings at http://www.asipto.com -


 __**_
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**usershttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio 4.0 IMS

[Jason Penton]

Thanks Carsten.

We have also started some other docs with Richard and Olle. Olle have you
managed to publish the doc Rich and I shared with you - at least this is a
nice overview of the modules, etc? I know there are still some module docs
outstanding from me which I will get to ASAP - apologies for that!

Cheers
Jason


On Tue, Apr 23, 2013 at 11:40 AM, Pavel Segeč pavel.se...@fri.uniza.skwrote:

 Thank you Carsten very much

 ** **

 Palo73

 ** **

 *From:* sr-users-boun...@lists.sip-router.org [mailto:
 sr-users-boun...@lists.sip-router.org] *On Behalf Of *Carsten Bock
 *Sent:* Tuesday, April 23, 2013 10:08 AM
 *To:* Kamailio (SER) - Users Mailing List
 *Cc:* andreea.ancuta.cor...@fokus.fraunhofer.de; Dragos Vingarzan
 *Subject:* Re: [SR-Users] Kamailio 4.0 IMS

 ** **

 Hi,

 i was approached by several people after Kamailio World 2013, that our
 installation guide is not available anymore.

 The old version was at some point quite outdated, that is the reason why
 i disabled the page. However, due to the great demand i will update the IMS
 on Kamailio how-to later this week and publish the updated version (and i
 will move it to the Kamailio Wiki so other points can be easily added by
 different people).

 IMS rocks!

 ** **

 Kind regards,
 Carsten

 ** **

 ** **

 2013/4/23 Pavel Segeč pavel.se...@fri.uniza.sk

 Sir,

 Thank you for your answer. Aggree all you wrote and I'm aware of that.
 Just I'm saying helps us..we use, popularize and love Kamailio project
 however we need some help ...that's all... Kamilio 4.0 IMS is a quite new
 thing and we are starting to use it during official student classes and
 labs, we are gaining experiences and we share them,we reports bugs and so
 on, we do not hide our knowledge

 palo73








 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 -- 

 Carsten Bock
 CEO (Geschäftsführer)

 ng-voice GmbH
 Schomburgstr. 80
 D-22767 Hamburg / Germany

 http://www.ng-voice.com
 mailto:cars...@ng-voice.com

 Office +49 40 34927219
 Fax +49 40 34927220

 Sitz der Gesellschaft: Hamburg
 Registergericht: Amtsgericht Hamburg, HRB 120189
 Geschäftsführer: Carsten Bock
 Ust-ID: DE279344284

 Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
 http://www.ng-voice.com/imprint/

 ** **

 __ Informacia od ESET NOD32 Antivirus, verzia databazy 8255
 (20130422) __

 ** **

 Tuto spravu preveril ESET NOD32 Antivirus.

 ** **

 http://www.eset.sk


 __ Informacia od ESET NOD32 Antivirus, verzia databazy 8255
 (20130422) __

 Tuto spravu preveril ESET NOD32 Antivirus.

 http://www.eset.sk

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 
Jason Penton
Senior Manager: Applications and Services
Smile Communications
Johannesburg, South Africa
Phone: +27 83 283 7000

This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio 4.0 IMS

[Jason Penton]

Sorry, I meant to ask Olle if you have published the doc we shared with you?


On Tue, Apr 23, 2013 at 6:20 PM, Jason Penton jason.pen...@smilecoms.comwrote:

 Thanks Carsten.

 We have also started some other docs with Richard and Olle. Olle have you
 managed to publish the doc Rich and I shared with you - at least this is a
 nice overview of the modules, etc? I know there are still some module docs
 outstanding from me which I will get to ASAP - apologies for that!

 Cheers
 Jason


 On Tue, Apr 23, 2013 at 11:40 AM, Pavel Segeč pavel.se...@fri.uniza.skwrote:

 Thank you Carsten very much

 ** **

 Palo73

 ** **

 *From:* sr-users-boun...@lists.sip-router.org [mailto:
 sr-users-boun...@lists.sip-router.org] *On Behalf Of *Carsten Bock
 *Sent:* Tuesday, April 23, 2013 10:08 AM
 *To:* Kamailio (SER) - Users Mailing List
 *Cc:* andreea.ancuta.cor...@fokus.fraunhofer.de; Dragos Vingarzan
 *Subject:* Re: [SR-Users] Kamailio 4.0 IMS

 ** **

 Hi,

 i was approached by several people after Kamailio World 2013, that our
 installation guide is not available anymore.

 The old version was at some point quite outdated, that is the reason
 why i disabled the page. However, due to the great demand i will update the
 IMS on Kamailio how-to later this week and publish the updated version (and
 i will move it to the Kamailio Wiki so other points can be easily added by
 different people).

 IMS rocks!

 ** **

 Kind regards,
 Carsten

 ** **

 ** **

 2013/4/23 Pavel Segeč pavel.se...@fri.uniza.sk

 Sir,

 Thank you for your answer. Aggree all you wrote and I'm aware of that.
 Just I'm saying helps us..we use, popularize and love Kamailio project
 however we need some help ...that's all... Kamilio 4.0 IMS is a quite new
 thing and we are starting to use it during official student classes and
 labs, we are gaining experiences and we share them,we reports bugs and so
 on, we do not hide our knowledge

 palo73








 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 -- 

 Carsten Bock
 CEO (Geschäftsführer)

 ng-voice GmbH
 Schomburgstr. 80
 D-22767 Hamburg / Germany

 http://www.ng-voice.com
 mailto:cars...@ng-voice.com

 Office +49 40 34927219
 Fax +49 40 34927220

 Sitz der Gesellschaft: Hamburg
 Registergericht: Amtsgericht Hamburg, HRB 120189
 Geschäftsführer: Carsten Bock
 Ust-ID: DE279344284

 Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
 http://www.ng-voice.com/imprint/

 ** **

 __ Informacia od ESET NOD32 Antivirus, verzia databazy 8255
 (20130422) __

 ** **

 Tuto spravu preveril ESET NOD32 Antivirus.

 ** **

 http://www.eset.sk


 __ Informacia od ESET NOD32 Antivirus, verzia databazy 8255
 (20130422) __

 Tuto spravu preveril ESET NOD32 Antivirus.

 http://www.eset.sk

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --
 Jason Penton
 Senior Manager: Applications and Services
 Smile Communications
 Johannesburg, South Africa
 Phone: +27 83 283 7000




-- 
Jason Penton
Senior Manager: Applications and Services
Smile Communications
Johannesburg, South Africa
Phone: +27 83 283 7000

This email is subject to the disclaimer of Smile Communications at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] What IP in REGISTER message does Kamalio use to store location ?

[Jason Penton]

There is probably some NAT helping code in your Kamailio config file.
Either that or you are using one the NAT protocols, (STUN,ICE,etc).

cheers
Jason


On Tue, Apr 2, 2013 at 2:39 AM, Khoa Pham onmyway...@gmail.com wrote:

 @Jason

 Thanks, but it strange. I only send 1 REGISTER to the server, with the
 Contact field contains my local IP address. How can I still receive
 incoming call ?


 On Mon, Apr 1, 2013 at 8:10 PM, Jason Penton 
 jason.pen...@smilecoms.comwrote:

 2

 --
 This email has been sent using my phone. It may be brief, to the point or
 contain typos.
 --
 On 1 Apr 2013 14:57, Khoa Pham onmyway...@gmail.com wrote:

  Hi, when client send REGISTER message to Kamalio. Kamailio will save
 that client's IP to database.
 But what is this IP ? Is is 1,2 or 3 ?
 1. The IP from Via field
 2. The IP from Contact field
 3. The IP from the IP packet

 Many thanks

 --
 Khoa Pham
 HCMC University of Science
 Faculty of Information Technology

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

 This email is subject to the disclaimer of Smile Communications (PTY) Ltd. 
 at http://www.smilecoms.com/disclaimer


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




 --
 Khoa Pham
 HCMC University of Science
 Faculty of Information Technology

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 
Jason Penton
Senior Manager: Applications and Services
Smile Communications
Johannesburg, South Africa
Phone: +27 83 283 7000

This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] What IP in REGISTER message does Kamalio use to store location ?

[Jason Penton]

2

--
This email has been sent using my phone. It may be brief, to the point or
contain typos.
--
On 1 Apr 2013 14:57, Khoa Pham onmyway...@gmail.com wrote:

 Hi, when client send REGISTER message to Kamalio. Kamailio will save that
 client's IP to database.
 But what is this IP ? Is is 1,2 or 3 ?
 1. The IP from Via field
 2. The IP from Contact field
 3. The IP from the IP packet

 Many thanks

 --
 Khoa Pham
 HCMC University of Science
 Faculty of Information Technology

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Problems with Mar portion of registration

[Jason Penton]

 [usr_avp.c:644]: DEBUG:destroy_avp_list: destroying
 list (nil)
  0(2204) DEBUG: core [usr_avp.c:644]: DEBUG:destroy_avp_list: destroying
 list (nil)
  0(2204) DEBUG: core [usr_avp.c:644]: DEBUG:destroy_avp_list: destroying
 list (nil)
  0(2204) DEBUG: core [xavp.c:447]: destroying xavp list (nil)
  0(2204) DEBUG: core [receive.c:293]: receive_msg: cleaning up
 10(2214) DEBUG: cdp [receiver.c:743]: select_recv(): There is something on
 the send pipe
 10(2214) DEBUG: cdp [receiver.c:756]: select_recv(): Send pipe says
 [0x7f64de66edd0] 8
 10(2214) DEBUG: cdp [diameter_msg.c:412]: AAAFreeMessage: Freeing message
 (0x7f64de66edd0) 303
 10(2214) DEBUG: cdp [receiver.c:104]: --- Receiver [cdp_receiver_peer=
 hss.somecompany.com] Serviced Peers: ---
 10(2214) DEBUG: cdp [receiver.c:110]:  Peer: [hss.somecompany.com]  TCP
 Socket: [15] Recv.State: [0]
 10(2214) DEBUG: cdp [receiver.c:112]:
 
 10(2214) DEBUG: cdp [receiver.c:104]: --- Receiver [cdp_receiver_peer=
 hss.somecompany.com] Serviced Peers: ---
 10(2214) DEBUG: cdp [receiver.c:110]:  Peer: [hss.somecompany.com]  TCP
 Socket: [15] Recv.State: [1]
 10(2214) DEBUG: cdp [receiver.c:112]:
 
 10(2214) DEBUG: cdp [receiver.c:567]: receive_loop(): [hss.somecompany.com]
 Recv Version 1 Length 172
 10(2214) DEBUG: cdp [receiver.c:104]: --- Receiver [cdp_receiver_peer=
 hss.somecompany.com] Serviced Peers: ---
 10(2214) DEBUG: cdp [receiver.c:110]:  Peer: [hss.somecompany.com]  TCP
 Socket: [15] Recv.State: [2]
 10(2214) DEBUG: cdp [receiver.c:112]:
 
 10(2214) DEBUG: cdp [receiver.c:1061]: receive_message(): [
 hss.somecompany.com] Recv msg 303
 10(2214) DEBUG: cdp [peerstatemachine.c:91]: sm_process(): Peer
 hss.somecompany.com State I_Open Event I_Rcv_Message
 10(2214) DEBUG: cdp [session.c:297]: called get session with id
 scscf.somecompany.com;1782936534;5 and hash 111
 10(2214) DEBUG: cdp [session.c:306]: no session found
 10(2214) DEBUG: cdp [receiver.c:104]: --- Receiver [cdp_receiver_peer=
 hss.somecompany.com] Serviced Peers: ---
 10(2214) DEBUG: cdp [receiver.c:110]:  Peer: [hss.somecompany.com]  TCP
 Socket: [15] Recv.State: [0]
 10(2214) DEBUG: cdp [receiver.c:112]:
 
  0(2204) ALERT: core [main.c:788]: child process 2212 exited by a signal
 11
  0(2204) ALERT: core [main.c:791]: core was generated
  0(2204) INFO: core [main.c:800]: INFO: dont_fork turned on, living on
  0(2204) ALERT: core [main.c:788]: child process 2211 exited by a signal
 11
  0(2204) ALERT: core [main.c:791]: core was generated
  0(2204) INFO: core [main.c:800]: INFO: dont_fork turned on, living on







 This is the modified register block to get a 401 unauthorized to even be
 generated (probably broken)….
 route[REGISTER] {
 xlog(L_ERR, Enter register block);
 t_newtran();

 if (!ims_www_authenticate(NETWORKNAME)) {
 ims_www_challenge($td);
 exit;
 }

 if ($avp(maa_return_code) != 1 )  {
if (!impu_registered(location)) {
 save(location);
 if ($avp(saa_return_code) == 1) {
  isc_match_filter_reg(0,location);
   exit;
 }
} else {
 save(location);
 if($avp(saa_return_code) == 1) {
  isc_match_filter_reg(1,location);
  exit;
 }
 }
 }
 }



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 
Jason Penton
Senior Manager: Applications and Services
Smile Communications
Johannesburg, South Africa
Phone: +27 83 283 7000

This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Problems with Mar portion of registration

[Jason Penton]

 303
 10(2214) DEBUG: cdp [peerstatemachine.c:91]: sm_process(): Peer
 hss.somecompany.com State I_Open Event I_Rcv_Message
 10(2214) DEBUG: cdp [session.c:297]: called get session with id
 scscf.somecompany.com;1782936534;5 and hash 111
 10(2214) DEBUG: cdp [session.c:306]: no session found
 10(2214) DEBUG: cdp [receiver.c:104]: --- Receiver [cdp_receiver_peer=
 hss.somecompany.com] Serviced Peers: ---
 10(2214) DEBUG: cdp [receiver.c:110]:  Peer: [hss.somecompany.com]  TCP
 Socket: [15] Recv.State: [0]
 10(2214) DEBUG: cdp [receiver.c:112]:
 
  0(2204) ALERT: core [main.c:788]: child process 2212 exited by a signal
 11
  0(2204) ALERT: core [main.c:791]: core was generated
  0(2204) INFO: core [main.c:800]: INFO: dont_fork turned on, living on
  0(2204) ALERT: core [main.c:788]: child process 2211 exited by a signal
 11
  0(2204) ALERT: core [main.c:791]: core was generated
  0(2204) INFO: core [main.c:800]: INFO: dont_fork turned on, living on







 This is the modified register block to get a 401 unauthorized to even be
 generated (probably broken)….
 route[REGISTER] {
 xlog(L_ERR, Enter register block);
 t_newtran();

 if (!ims_www_authenticate(NETWORKNAME)) {
 ims_www_challenge($td);
 exit;
 }

 if ($avp(maa_return_code) != 1 )  {
if (!impu_registered(location)) {
 save(location);
 if ($avp(saa_return_code) == 1) {
  isc_match_filter_reg(0,location);
   exit;
 }
} else {
 save(location);
 if($avp(saa_return_code) == 1) {
  isc_match_filter_reg(1,location);
  exit;
 }
 }
 }
 }



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




-- 
Jason Penton
Senior Manager: Applications and Services
Smile Communications
Johannesburg, South Africa
Phone: +27 83 283 7000

This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Delay message

[Jason Penton]

Use the new async module.
 On Oct 15, 2012 3:49 PM, pars3c par...@gmail.com wrote:

 Hi,

 how can i delay sending of a message  ?

 ** **

 A  proxy (after x seconds) --- B

 If I use the sleep function of the cfgutils module,I block all the calls
 for the sleep time or the single one?

 Thanks

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Delay message

[Jason Penton]

Sorry my last reply was from my phone and a little brief.

see here -
http://kamailio.org/docs/modules/devel/modules/async.html#id2544960

you can use async_sleep in your case.

Cheers
Jason

On Mon, Oct 15, 2012 at 7:20 PM, Jason Penton jason.pen...@smilecoms.comwrote:

 Use the new async module.
  On Oct 15, 2012 3:49 PM, pars3c par...@gmail.com wrote:

 Hi,

 how can i delay sending of a message  ?

 ** **

 A  proxy (after x seconds) --- B

 If I use the sleep function of the cfgutils module,I block all the calls
 for the sleep time or the single one?

 Thanks

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Audiocide

[Jason Penton]

How about a capture of the message? log file from Kamailio? You are not
going to get much help with such a little information

On Wed, Sep 26, 2012 at 8:36 AM, Cong Le Kha con...@ntc.com.vn wrote:

  Dear Kamailio

 ** **

 I have got a problem as you with Audiocode 

 ** **

 SIP/ SECurity/ MGmt/ DebugRecording/ ControlProtocol/ CONFiguration/
 IPNetworking/ TPApp/ BSP/

 PING SHow

 /NOTIC:( sip_stack)(185   )  *AcSIPParser: Problem in SIP
 Message Headers*

 RECOV:( sip_stack)(186   ) !! [ERROR] AcSIPParser: Parse Error. No
 appropriate delimiter found in multipart body

 RECOV:( sip_stack)(187   ) !! [ERROR] Message type: INVITE

 RECOV:( sip_stack)(188   ) !! [ERROR] Source header:

 RECOV:( sip_stack)(189   ) !! [ERROR] Line: 41. Column: 1

 ** **

 Can you  help me?

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] [ot] virtualization systems

[Jason Penton]

Hi Daniel,

not evaluation, but if you use it in production then you are required to
buy a OS support contract. We however have standardised on Sun hardware
which includes support for Solaris 11 in our production environment. So,
yes a good point you make if you are going to be using in production on
non-sun hardware you will need to pay Oracle ;(

cheers
Jason

On Wed, Aug 29, 2012 at 7:46 AM, Daniel-Constantin Mierla mico...@gmail.com
 wrote:


 On 8/28/12 6:09 PM, Jason Penton wrote:

 No. We use solaris11.


 IIRC, solaris 11 was free for evaluation purposes, has that changed?

 BTW, since mainstream opensolaris was discontinued, anyone knows what is
 the best derivative (if that is at all)?

 Cheers,
 Daniel


  But yes on any hardware
 On Aug 28, 2012 5:56 PM, Daniel-Constantin Mierla mico...@gmail.com
 wrote:

  Hello,

 On 8/28/12 10:33 AM, Jason Penton wrote:

 Hey Daniel,

 We use Solaris virtualisation and it works great. The zones (VMs per se)
 are lightweight, easy to administer and rock solid.

 btw, common misconceptions are that you need sun (oracle) hardware and
 that the os is not free. These are both false.


 so you use opensolaris, I guess, and then it can be any intel/amd arch
 server (e.g., dell, hp)?

 Cheers,
 Daniel


 cheers
 Jason

 On Tue, Aug 28, 2012 at 9:59 AM, Carsten Bock cars...@ng-voice.comwrote:

 Hi Daniel,

 here's from my personal experience:
 Our setup at ng-voice is a little weird sometimes: We've rented some
 virtual servers at a german provider (who uses Xen). On these virtual
 servers we've installed OpenVz, which for us is absolutely great, if
 you are just working with Linux-Servers. While Xen is a rather
 complete virtualization, OpenVz is lightweight and comes in handy, if
 you just want to logically separate servers. We've got each IMS
 component (P-/I-/S-CSCF, HSS, Application-Servers, Databases) running
 on a dedicated OpenVz Container, which is really great. We've even got
 a CentOs-Container running on a Debian OpenVz, which is started
 on-demand in order to build RPM-Packages. With OpenVz you can even
 move Containers from one host to another, theoretically with zero
 downtime (doesn't work with SEMS, don't know about other software).
 For our IMS-setup, we work with RTP-Relaying, which works great within
 virtualization, i cannot complain.

 At another customer (a fibre provider in Germany), we're running all
 the infrastructure on Xen-only. An infrastructure provider takes care
 of the administration, but those servers run poorly (RTP-Relaying is
 okay but everything else is really slow).

 Conclusion for me: VoIP on virtual servers can work great, but the
 virtualization infrastructure needs to be administered properly which
 may not be an easy task, if you are new in this subject.

 Kind regards,
 Carsten

 2012/8/28 Daniel-Constantin Mierla mico...@gmail.com:
   Hello,
 
  just asking to see your experience deploying sip platforms on virtual
  systems. So far I was running Kamailio in virtual machines and no
 problems,
  but I insisted that media servers to be on physical machines. Lately
 is more
  pressure from the market to go everything virtual.
 
  So the question is more about having everything on virtual systems,
 proxy
  and media server, where the media server can deal with transcoding,
  conference rooms and IVRs.
 
  Any strong comments pro or against?
 
  What is your preferred virtualization system for such deployments?
 
  Cheers,
  Daniel
 
  --
  Daniel-Constantin Mierla - http://www.asipto.com
  http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
  Kamailio Advanced Training, Berlin, Nov 5-8, 2012 -
 http://asipto.com/u/kat
 
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



  --
 Carsten Bock
 CEO (Geschäftsführer)

 ng-voice GmbH
 Schomburgstr. 80
 D-22767 Hamburg / Germany

 http://www.ng-voice.com
 mailto:cars...@ng-voice.com

 Office +49 40 34927219 %2B49%2040%2034927219
 Fax +49 40 34927220 %2B49%2040%2034927220

 Sitz der Gesellschaft: Hamburg
 Registergericht: Amtsgericht Hamburg, HRB 120189
 Geschäftsführer: Carsten Bock
 Ust-ID: DE279344284

 Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
 http://www.ng-voice.com/imprint/

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


 This email is subject to the disclaimer of Smile Communications (PTY) Ltd. 
 at http://www.smilecoms.com/disclaimer



 --
 Daniel-Constantin Mierla - 
 http://www.asipto.comhttp://twitter.com/#!/miconda - 
 http://www.linkedin.com/in/miconda
 Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat

   This email is subject to the disclaimer of Smile Communications (PTY

Re: [SR-Users] [ot] virtualization systems

[Jason Penton]

Hey Daniel,

We use Solaris virtualisation and it works great. The zones (VMs per se)
are lightweight, easy to administer and rock solid.

btw, common misconceptions are that you need sun (oracle) hardware and that
the os is not free. These are both false.

cheers
Jason

On Tue, Aug 28, 2012 at 9:59 AM, Carsten Bock cars...@ng-voice.com wrote:

 Hi Daniel,

 here's from my personal experience:
 Our setup at ng-voice is a little weird sometimes: We've rented some
 virtual servers at a german provider (who uses Xen). On these virtual
 servers we've installed OpenVz, which for us is absolutely great, if
 you are just working with Linux-Servers. While Xen is a rather
 complete virtualization, OpenVz is lightweight and comes in handy, if
 you just want to logically separate servers. We've got each IMS
 component (P-/I-/S-CSCF, HSS, Application-Servers, Databases) running
 on a dedicated OpenVz Container, which is really great. We've even got
 a CentOs-Container running on a Debian OpenVz, which is started
 on-demand in order to build RPM-Packages. With OpenVz you can even
 move Containers from one host to another, theoretically with zero
 downtime (doesn't work with SEMS, don't know about other software).
 For our IMS-setup, we work with RTP-Relaying, which works great within
 virtualization, i cannot complain.

 At another customer (a fibre provider in Germany), we're running all
 the infrastructure on Xen-only. An infrastructure provider takes care
 of the administration, but those servers run poorly (RTP-Relaying is
 okay but everything else is really slow).

 Conclusion for me: VoIP on virtual servers can work great, but the
 virtualization infrastructure needs to be administered properly which
 may not be an easy task, if you are new in this subject.

 Kind regards,
 Carsten

 2012/8/28 Daniel-Constantin Mierla mico...@gmail.com:
  Hello,
 
  just asking to see your experience deploying sip platforms on virtual
  systems. So far I was running Kamailio in virtual machines and no
 problems,
  but I insisted that media servers to be on physical machines. Lately is
 more
  pressure from the market to go everything virtual.
 
  So the question is more about having everything on virtual systems, proxy
  and media server, where the media server can deal with transcoding,
  conference rooms and IVRs.
 
  Any strong comments pro or against?
 
  What is your preferred virtualization system for such deployments?
 
  Cheers,
  Daniel
 
  --
  Daniel-Constantin Mierla - http://www.asipto.com
  http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
  Kamailio Advanced Training, Berlin, Nov 5-8, 2012 -
 http://asipto.com/u/kat
 
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 --
 Carsten Bock
 CEO (Geschäftsführer)

 ng-voice GmbH
 Schomburgstr. 80
 D-22767 Hamburg / Germany

 http://www.ng-voice.com
 mailto:cars...@ng-voice.com

 Office +49 40 34927219
 Fax +49 40 34927220

 Sitz der Gesellschaft: Hamburg
 Registergericht: Amtsgericht Hamburg, HRB 120189
 Geschäftsführer: Carsten Bock
 Ust-ID: DE279344284

 Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
 http://www.ng-voice.com/imprint/

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] [ot] virtualization systems

[Jason Penton]

Hey Klaus,

We use solaris as host AND guest ;)

solaris is slightly different to normal VM systems in that you can't really
load up any OS into the guest. There are branded zones that support a few
flavours of linux (ala redhat, etc). However, in our experience the Solaris
OS is really solid for all we need.

you can read up alot here -
http://www.oracle.com/us/products/servers-storage/solaris/solaris11/overview/index.html

Also there is some really nice network virtualisation you can do too.

Cheers
Jason



On Tue, Aug 28, 2012 at 12:11 PM, Klaus Darilion 
klaus.mailingli...@pernau.at wrote:

 Jason, are you using Solaris only as host or also as guest OS?

 regards
 Klaus


 On 28.08.2012 10:33, Jason Penton wrote:

 Hey Daniel,

 We use Solaris virtualisation and it works great. The zones (VMs per se)
 are lightweight, easy to administer and rock solid.

 btw, common misconceptions are that you need sun (oracle) hardware and
 that the os is not free. These are both false.

 cheers
 Jason

 On Tue, Aug 28, 2012 at 9:59 AM, Carsten Bock cars...@ng-voice.com
 mailto:cars...@ng-voice.com wrote:

 Hi Daniel,

 here's from my personal experience:
 Our setup at ng-voice is a little weird sometimes: We've rented some
 virtual servers at a german provider (who uses Xen). On these virtual
 servers we've installed OpenVz, which for us is absolutely great, if
 you are just working with Linux-Servers. While Xen is a rather
 complete virtualization, OpenVz is lightweight and comes in handy, if
 you just want to logically separate servers. We've got each IMS
 component (P-/I-/S-CSCF, HSS, Application-Servers, Databases) running
 on a dedicated OpenVz Container, which is really great. We've even got
 a CentOs-Container running on a Debian OpenVz, which is started
 on-demand in order to build RPM-Packages. With OpenVz you can even
 move Containers from one host to another, theoretically with zero
 downtime (doesn't work with SEMS, don't know about other software).
 For our IMS-setup, we work with RTP-Relaying, which works great within
 virtualization, i cannot complain.

 At another customer (a fibre provider in Germany), we're running all
 the infrastructure on Xen-only. An infrastructure provider takes care
 of the administration, but those servers run poorly (RTP-Relaying is
 okay but everything else is really slow).

 Conclusion for me: VoIP on virtual servers can work great, but the
 virtualization infrastructure needs to be administered properly which
 may not be an easy task, if you are new in this subject.

 Kind regards,
 Carsten

 2012/8/28 Daniel-Constantin Mierla mico...@gmail.com
 mailto:mico...@gmail.com:

   Hello,
  
   just asking to see your experience deploying sip platforms on
 virtual
   systems. So far I was running Kamailio in virtual machines and no
 problems,
   but I insisted that media servers to be on physical machines.
 Lately is more
   pressure from the market to go everything virtual.
  
   So the question is more about having everything on virtual
 systems, proxy
   and media server, where the media server can deal with transcoding,
   conference rooms and IVRs.
  
   Any strong comments pro or against?
  
   What is your preferred virtualization system for such deployments?
  
   Cheers,
   Daniel
  
   --
   Daniel-Constantin Mierla - http://www.asipto.com
   http://twitter.com/#!/miconda 
 http://twitter.com/#%21/**micondahttp://twitter.com/#%21/miconda
 -

 http://www.linkedin.com/in/**micondahttp://www.linkedin.com/in/miconda
   Kamailio Advanced Training, Berlin, Nov 5-8, 2012 -
 http://asipto.com/u/kat
  
  
   __**_
   SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
 mailing list
   sr-users@lists.sip-router.org mailto:sr-us...@lists.sip-**
 router.org sr-users@lists.sip-router.org

   
 http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**usershttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 --
 Carsten Bock
 CEO (Geschäftsführer)

 ng-voice GmbH
 Schomburgstr. 80
 D-22767 Hamburg / Germany

 http://www.ng-voice.com
 mailto:cars...@ng-voice.com mailto:cars...@ng-voice.com

 Office +49 40 34927219 tel:%2B49%2040%2034927219
 Fax +49 40 34927220 tel:%2B49%2040%2034927220


 Sitz der Gesellschaft: Hamburg
 Registergericht: Amtsgericht Hamburg, HRB 120189
 Geschäftsführer: Carsten Bock
 Ust-ID: DE279344284

 Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
 http://www.ng-voice.com/**imprint/ http://www.ng-voice.com/imprint/

 __**_
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
 list
 sr-users@lists.sip-router.org

Re: [SR-Users] [ot] virtualization systems

[Jason Penton]

No. We use solaris11. But yes on any hardware
On Aug 28, 2012 5:56 PM, Daniel-Constantin Mierla mico...@gmail.com
wrote:

  Hello,

 On 8/28/12 10:33 AM, Jason Penton wrote:

 Hey Daniel,

 We use Solaris virtualisation and it works great. The zones (VMs per se)
 are lightweight, easy to administer and rock solid.

 btw, common misconceptions are that you need sun (oracle) hardware and
 that the os is not free. These are both false.


 so you use opensolaris, I guess, and then it can be any intel/amd arch
 server (e.g., dell, hp)?

 Cheers,
 Daniel


 cheers
 Jason

 On Tue, Aug 28, 2012 at 9:59 AM, Carsten Bock cars...@ng-voice.comwrote:

 Hi Daniel,

 here's from my personal experience:
 Our setup at ng-voice is a little weird sometimes: We've rented some
 virtual servers at a german provider (who uses Xen). On these virtual
 servers we've installed OpenVz, which for us is absolutely great, if
 you are just working with Linux-Servers. While Xen is a rather
 complete virtualization, OpenVz is lightweight and comes in handy, if
 you just want to logically separate servers. We've got each IMS
 component (P-/I-/S-CSCF, HSS, Application-Servers, Databases) running
 on a dedicated OpenVz Container, which is really great. We've even got
 a CentOs-Container running on a Debian OpenVz, which is started
 on-demand in order to build RPM-Packages. With OpenVz you can even
 move Containers from one host to another, theoretically with zero
 downtime (doesn't work with SEMS, don't know about other software).
 For our IMS-setup, we work with RTP-Relaying, which works great within
 virtualization, i cannot complain.

 At another customer (a fibre provider in Germany), we're running all
 the infrastructure on Xen-only. An infrastructure provider takes care
 of the administration, but those servers run poorly (RTP-Relaying is
 okay but everything else is really slow).

 Conclusion for me: VoIP on virtual servers can work great, but the
 virtualization infrastructure needs to be administered properly which
 may not be an easy task, if you are new in this subject.

 Kind regards,
 Carsten

 2012/8/28 Daniel-Constantin Mierla mico...@gmail.com:
   Hello,
 
  just asking to see your experience deploying sip platforms on virtual
  systems. So far I was running Kamailio in virtual machines and no
 problems,
  but I insisted that media servers to be on physical machines. Lately is
 more
  pressure from the market to go everything virtual.
 
  So the question is more about having everything on virtual systems,
 proxy
  and media server, where the media server can deal with transcoding,
  conference rooms and IVRs.
 
  Any strong comments pro or against?
 
  What is your preferred virtualization system for such deployments?
 
  Cheers,
  Daniel
 
  --
  Daniel-Constantin Mierla - http://www.asipto.com
  http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
  Kamailio Advanced Training, Berlin, Nov 5-8, 2012 -
 http://asipto.com/u/kat
 
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



  --
 Carsten Bock
 CEO (Geschäftsführer)

 ng-voice GmbH
 Schomburgstr. 80
 D-22767 Hamburg / Germany

 http://www.ng-voice.com
 mailto:cars...@ng-voice.com

 Office +49 40 34927219 %2B49%2040%2034927219
 Fax +49 40 34927220 %2B49%2040%2034927220

 Sitz der Gesellschaft: Hamburg
 Registergericht: Amtsgericht Hamburg, HRB 120189
 Geschäftsführer: Carsten Bock
 Ust-ID: DE279344284

 Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
 http://www.ng-voice.com/imprint/

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


 This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
 http://www.smilecoms.com/disclaimer



 --
 Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda 
 - http://www.linkedin.com/in/miconda
 Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat



This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio and IMS

[Jason Penton]

Hi Apoorv,

We, along with Carsten and some other guys are working on IMS extensions
for Kamailio. Right now the code sits in a staging area while we test and
improve before re-integrating it into Kamailio master. You can find the
extensions here:

http://code.google.com/p/smile-ims-extensions/

Please feel free to ask if you have any questions.

Cheers
Jason

On Fri, Jul 20, 2012 at 7:51 AM, Ivan Milivojevic edes...@googlemail.comwrote:


 http://nil.uniza.sk/ngnims/kamailio-ims/installing-base-kamailio-ims-platform-debian-squeeze-32bit

 Best Regards
 Ivan

 On Fri, Jul 20, 2012 at 5:06 AM, Apoorv Khare khareapo...@gmail.com
 wrote:
  Hi Everyone,
 
  I am trying to integrate IMS(carstenbock/ims) patch in Kamailio. But so
 far
  I could not find any proper documentation to load configuration files -
  pcscf, icscf, scscf, mgcf etc? Please let me know if there is anything
  available!
 
  Only relevant link I found -
  http://www.kamailio.org/w/2011/01/ims-extensions-available-for-testing/AND
  this link does not seems to be update -
  http://www.ng-voice.com/our-solution/installation/
 
  BR, Apoorv
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
 

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio and IMS

[Jason Penton]

Hi Apoorv,

No this is different to Carsten's branch. You will have to check it out
using - http://code.google.com/p/smile-ims-extensions/source/checkout

I think for now until we get the code into Kamailio master (with all docs)
it may be better for you to use Carsten's branch as it has documentation to
use it ;) - ours doesn't just yet and I, nor the others, will have too much
time to help you out too much

The code will be in Kamailio master soon (with docs). I promise! ;)

Cheers
Jason

On Fri, Jul 20, 2012 at 8:54 AM, Apoorv Khare khareapo...@gmail.com wrote:

 Thanks Jason,

 Really looking forward towards this when can we expect it? Currently I
 have downloaded following way, is this correct? Is there any way I can load
 all the config files simultaneously like we do in Open-IMS or if not can we
 add some paths in kamilio.cfg to load pcscf.cfg and others...

 git clone --depth 1 git://git.sip-router.org/sip-router kamailio
 checkout carstenbock/ims

 Great work folks!!

 BR, Apoorv

 On Thu, Jul 19, 2012 at 11:44 PM, Jason Penton jason.pen...@smilecoms.com
  wrote:

 Hi Apoorv,

 We, along with Carsten and some other guys are working on IMS extensions
 for Kamailio. Right now the code sits in a staging area while we test and
 improve before re-integrating it into Kamailio master. You can find the
 extensions here:

 http://code.google.com/p/smile-ims-extensions/

 Please feel free to ask if you have any questions.

 Cheers
 Jason


 On Fri, Jul 20, 2012 at 7:51 AM, Ivan Milivojevic edes...@googlemail.com
  wrote:


 http://nil.uniza.sk/ngnims/kamailio-ims/installing-base-kamailio-ims-platform-debian-squeeze-32bit

 Best Regards
 Ivan

 On Fri, Jul 20, 2012 at 5:06 AM, Apoorv Khare khareapo...@gmail.com
 wrote:
  Hi Everyone,
 
  I am trying to integrate IMS(carstenbock/ims) patch in Kamailio. But
 so far
  I could not find any proper documentation to load configuration files -
  pcscf, icscf, scscf, mgcf etc? Please let me know if there is anything
  available!
 
  Only relevant link I found -
 
 http://www.kamailio.org/w/2011/01/ims-extensions-available-for-testing/AND
  this link does not seems to be update -
  http://www.ng-voice.com/our-solution/installation/
 
  BR, Apoorv
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
 

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


 This email is subject to the disclaimer of Smile Communications (PTY) Ltd. 
 at http://www.smilecoms.com/disclaimer


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Presence Subscription / Subscription-State: pending

[Jason Penton]

ok cool

On Thu, Jul 19, 2012 at 9:15 AM, Daniel-Constantin Mierla mico...@gmail.com
 wrote:

  Hello,

 please keep the mailing list cc-ed, private emails from mailing list
 discussions will be ignored.

 On 7/19/12 8:28 AM, Durmuş Ali Öztürk wrote:

 Hi Daniel,

  Thank you for your advise. I have found the problem, I thought it is
 enough to subscribe with my own ID but fact is I have to subscribe to the
 buddies of my contact list.This was not clear for me at the beginning.

 ok, great you found it.


  It is better to subscribe only to the presence.wmi? Or should I
 susbcribe to presence and presence.wmi?


 Do you mean presence mwi? mwi is for message waiting indication, like
 voicemail, so you get notifications when someone leaves you a message on
 the media server.

 Cheers,
 Daniel


  Best Regards,
 Ali


 2012/7/18 Daniel-Constantin Mierla mico...@gmail.com

  Hello,

 when you updated the presence rules via xcap, did you executed the
 function to update the notifiers as well? I mean the two function at:

 http://kamailio.org/docs/modules/stable/modules_k/presence.html#id2496049

 Cheers,
 Daniel



 On 7/18/12 9:29 AM, Durmuş Ali Öztürk wrote:

  Hi All,

  I am trying to subscribe to the presence event but unfortunaly I am
 getting following Notify with the Subscription-State: pending status.

  NOTIFY sip:5000@192.168.127.138:55583 SIP/2.0
 Via: SIP/2.0/UDP 192.168.127.230;branch=z9hG4bK6a8e.19cd7bb7.0
 To: sip:5000@192.168.127.230;tag=2786be25cb234561b8dea2e067fd769c-5000
  From: sip:5000@192.168.127.230;tag=a6a1c5f60faecf035a1ae5b6e96e979a-6a8e
 CSeq: 2 NOTIFY
 Call-ID: e4ec6031-99e1-de11-8845-5000@vvt-laptop
 Content-Length: 0
 User-Agent: kamailio (3.2.3 (i386/linux))
 Max-Forwards: 70
 Event: presence
  Contact: sip:192.168.127.230:5060;transport=udp
 Subscription-State: pending;expires=3670


  For the implemantation I followed the guide from
 http://kb.asipto.com/kamailio:presence:k31-made-simple

  The xcap table has already the needed resource-lists and pres-rules
 record.

  Is there another guide exists for the presence module which can be
 helpfully for me?

  Thank you in advance
 ali




  ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing 
 listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


 --
 Daniel-Constantin Mierla - 
 http://www.asipto.comhttp://twitter.com/#!/miconda - 
 http://www.linkedin.com/in/miconda
 Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 - 
 http://asipto.com/u/katu
 Kamailio Practical Workshop, Netherlands, Sep 10-12, 2012 - 
 http://asipto.com/u/kpw



 --
 Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda 
 - http://www.linkedin.com/in/miconda
 Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 - 
 http://asipto.com/u/katu
 Kamailio Practical Workshop, Netherlands, Sep 10-12, 2012 - 
 http://asipto.com/u/kpw


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio Unexpectedly Terminating

[Jason Penton]

from the logs he has sent the mem addresses all look 64 bit. Sparc AFAIK is
only 64 bit anyway

Cheers
Jason

On Tue, Jun 12, 2012 at 8:50 AM, Daniel-Constantin Mierla mico...@gmail.com
 wrote:

 Hello,

 is it 64bit architecture?

 Cheers,
 Daniel


 On 6/11/12 9:12 PM, Akan wrote:

 Here is the information requested:

 System = SunOS
 Node = -f
 Release = 5.10
 KernelID = Generic_141444-09
 Machine = sun4u
 BusType = unknown
 Serial = unknown
 Users = unknown
 OEM# = 0
 Origin# = 1
 NumCPU = 1

 One machine is a Sun Fire V120, 2g memory, UltraSPARC-IIe 650MHz,
 UltraAX-i2
 The other machine is a Sun Netra  T1 200, 1g memory, UltraSparc-IIe
 500MHz, UltraAX-i2

 Thanks

 Nathaniel L Keeling



 On 6/11/2012 8:33 AM, Daniel-Constantin Mierla wrote:

 Hello,

 I committed a patch that should make it work when realm_prefix is not
 set for registrar module:

 http://git.sip-router.org/cgi-**bin/gitweb.cgi/sip-router/?a=**commit;h=
 **d42379da90f2ec87cb5dbb00ebb563**c7528ec910http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=d42379da90f2ec87cb5dbb00ebb563c7528ec910

 For the moment I have no idea why SIGBUS is triggered, i tried to access
 the structure directly, not via defines, and there is still a problem when
 realm_prefix is set. It's ok accessing the .len field but not .s of the
 same structure. The field .s is the first, making me think it's not
 alignment issue, or it is something very specific to this system.

 Overall, I am not familiar with sparc/solaris systems, maybe if you send
 here full details about OS version, architecture and CPU type, others using
 similar systems can give hints.

 Jason reported that on solaris with x86, this problem was not
 encountered.

 Cheers,
 Daniel

 On 6/4/12 8:57 AM, Daniel-Constantin Mierla wrote:

 Hello,

 still strange with the crash on that if condition. One of your previous
 reports showed a different line, when assigning a pointer. Also, I kind of
 understood that save() was ok, but lookup() not. Is not the case anymore as
 the backtrace shows.

 SIGBUS can occur because of alignment in memory which is thrown in
 solaris, does not happen in linux flavours. I am thinking of putting the
 prefix field first so the access to it is at beginning of the straucture,
 just to see if that is the problem, although is should not be.

 I will add a patch soon, otherwise I am out of ideas for the moment
 with the SIGBUS, I would need access to the machine to do some testing by
 myself.

 Cheers,
 Daniel

 On 6/2/12 10:36 PM, Akan wrote:

 Ok, I reloaded the servers with v3.2 from git without performing the
 checkout and with just the master branch.  Reran my tests on 2 servers and
 Kamailio terminated with a core dump. I have included the full trace of 
 one
 of the servers. The other trace has the same results.

 Thanks

 Nathaniel

 On 5/30/2012 2:25 PM, Daniel-Constantin Mierla wrote:

 Hello,

 On 5/30/12 9:10 PM, Akan wrote:

 This was a re-pull from the git master. I had deleted all of the old
 files and issued these commands:

 git clone --depth 1 
 git://git.sip-router.org/sip-**routerhttp://git.sip-router.org/sip-routerkamailio
 cd kamailio
 git checkout -b 3.2 origin/3.2

 This is the source that I got. Could this be a problem within git?

 do not checkout branch 3.2, just try with the master branch, as said,
 not all patches are backported to stable 3.2.

 For sake of completeness, here are some guidelines:
 http://www.kamailio.org/wiki/**install/devel/githttp://www.kamailio.org/wiki/install/devel/git

 Cheers,
 Daniel



 __**_
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**usershttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


 --
 Daniel-Constantin Mierla -http://www.asipto.com
 http://twitter.com/#!/miconda 
 -http://www.linkedin.com/in/**micondahttp://www.linkedin.com/in/miconda
 Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 -
 http://asipto.com/u/katu
 Kamailio Practical Workshop, Netherlands, Sep 10-12, 2012 -
 http://asipto.com/u/kpw



 --
 Daniel-Constantin Mierla -http://www.asipto.com
 http://twitter.com/#!/miconda 
 -http://www.linkedin.com/in/**micondahttp://www.linkedin.com/in/miconda
 Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 -
 http://asipto.com/u/katu
 Kamailio Practical Workshop, Netherlands, Sep 10-12, 2012 -
 http://asipto.com/u/kpw


 No virus found in this message.
 Checked by AVG - www.avg.com http://www.avg.com
 Version: 2012.0.2178 / Virus Database: 2433/5061 - Release Date: 06/10/12




 __**_
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**usershttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


 --
 Daniel-Constantin Mierla - 

Re: [SR-Users] Kamailio Unexpectedly Terminating

[Jason Penton]

This seems like a really strange bug, what compiler are you using, gcc or
sun studio? We use gcc and don't have any issues like this. I will use sun
studio if you confirm that you are using it and will give that a go.

Cheers
Jason

On Mon, Jun 4, 2012 at 8:57 AM, Daniel-Constantin Mierla
mico...@gmail.comwrote:

  Hello,

 still strange with the crash on that if condition. One of your previous
 reports showed a different line, when assigning a pointer. Also, I kind of
 understood that save() was ok, but lookup() not. Is not the case anymore as
 the backtrace shows.

 SIGBUS can occur because of alignment in memory which is thrown in
 solaris, does not happen in linux flavours. I am thinking of putting the
 prefix field first so the access to it is at beginning of the straucture,
 just to see if that is the problem, although is should not be.

 I will add a patch soon, otherwise I am out of ideas for the moment with
 the SIGBUS, I would need access to the machine to do some testing by myself.

 Cheers,
 Daniel


 On 6/2/12 10:36 PM, Akan wrote:

 Ok, I reloaded the servers with v3.2 from git without performing the
 checkout and with just the master branch.  Reran my tests on 2 servers and
 Kamailio terminated with a core dump. I have included the full trace of one
 of the servers. The other trace has the same results.

 Thanks

 Nathaniel

 On 5/30/2012 2:25 PM, Daniel-Constantin Mierla wrote:

 Hello,

 On 5/30/12 9:10 PM, Akan wrote:

 This was a re-pull from the git master. I had deleted all of the old files
 and issued these commands:

 git clone --depth 1 git://git.sip-router.org/sip-router kamailio
 cd kamailio
 git checkout -b 3.2 origin/3.2

 This is the source that I got. Could this be a problem within git?

 do not checkout branch 3.2, just try with the master branch, as said, not
 all patches are backported to stable 3.2.

 For sake of completeness, here are some guidelines:
 http://www.kamailio.org/wiki/install/devel/git

 Cheers,
 Daniel



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing 
 listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


 --
 Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda 
 - http://www.linkedin.com/in/miconda
 Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 - 
 http://asipto.com/u/katu
 Kamailio Practical Workshop, Netherlands, Sep 10-12, 2012 - 
 http://asipto.com/u/kpw




 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] [sr-dev] branching 3.3 - to be used for 3.3.x releases

[Jason Penton]

Hey Daniel,

If you want me to have a look at the solaris problem, let me know. Where
are the details for the problem?

Cheers
Jason

On Mon, Jun 11, 2012 at 9:01 AM, Daniel-Constantin Mierla mico...@gmail.com
 wrote:

 Hello,

 I am going to create the GIT branch 3.3 in short time -- this branch will
 be used for releasing 3.3.x versions.

 After that master can take again commits of new features, to be part of
 next major release 3.4.x. Branch 3.3 will take only fixes.

 From my point of view, I have two issues that I am trying to solve and the
 3.3.0 is ready to go out, namely:
  - a solaris sigbus
  - pua_dialoginfo issue reported on mailing list

 Otherwise, nothing else critcal is out there, to my knowledge. Report them
 if you have other ones. Packaging specs were updated, so we are pretty much
 ready to release when no relevant issues is open.

 The wiki page with what is new in this release was updated a bit as well,
 add if you find something missing at:
  - 
 http://www.kamailio.org/wiki/**features/new-in-develhttp://www.kamailio.org/wiki/features/new-in-devel

 Also, contribute to the upgrade guidelines:
  - 
 http://www.kamailio.org/wiki/**install/upgrade/3.2.x-to-3.3.0http://www.kamailio.org/wiki/install/upgrade/3.2.x-to-3.3.0

 Cheer,
 Daniel

 --
 Daniel-Constantin Mierla - http://www.asipto.com
 http://twitter.com/#!/miconda - 
 http://www.linkedin.com/in/**micondahttp://www.linkedin.com/in/miconda
 Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 -
 http://asipto.com/u/katu
 Kamailio Practical Workshop, Netherlands, Sep 10-12, 2012 -
 http://asipto.com/u/kpw


 __**_
 sr-dev mailing list
 sr-...@lists.sip-router.org
 http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**devhttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] SIP Client for iphone

[Jason Penton]

Also check imsdroid for iphone. It works as std SIP too.

On Fri, Jun 1, 2012 at 9:36 AM, Daniel-Constantin Mierla
mico...@gmail.comwrote:

 Hello,


 On 6/1/12 9:06 AM, Vijay Thakur wrote:

 Dear All,

 Kindly suggest me the compatible client for iphone and Mac OS Leopard.
 I have found that Jisti is working very fine for all features on Linux
 and MS Windows.

  I use jitsi for Mac OS X, iirc, it worked fine on Leopard, now I
 upgraded the OS. For iPhone and even the other OSes, check Linphone.

 Cheers,
 Daniel

 --
 Daniel-Constantin Mierla - http://www.asipto.com
 http://twitter.com/#!/miconda - 
 http://www.linkedin.com/in/**micondahttp://www.linkedin.com/in/miconda
 Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 -
 http://asipto.com/u/katu
 Kamailio Practical Workshop, Netherlands, Sep 10-12, 2012 -
 http://asipto.com/u/kpw





 __**_
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**usershttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] SIP Client for iphone

[Jason Penton]

sorry that's the android version, iphone version is called idoubs -
http://code.google.com/p/idoubs/

On Fri, Jun 1, 2012 at 10:04 AM, Jason Penton jason.pen...@smilecoms.comwrote:

 Also check imsdroid for iphone. It works as std SIP too.


 On Fri, Jun 1, 2012 at 9:36 AM, Daniel-Constantin Mierla 
 mico...@gmail.com wrote:

 Hello,


 On 6/1/12 9:06 AM, Vijay Thakur wrote:

 Dear All,

 Kindly suggest me the compatible client for iphone and Mac OS Leopard.
 I have found that Jisti is working very fine for all features on Linux
 and MS Windows.

  I use jitsi for Mac OS X, iirc, it worked fine on Leopard, now I
 upgraded the OS. For iPhone and even the other OSes, check Linphone.

 Cheers,
 Daniel

 --
 Daniel-Constantin Mierla - http://www.asipto.com
 http://twitter.com/#!/miconda - 
 http://www.linkedin.com/in/**micondahttp://www.linkedin.com/in/miconda
 Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 -
 http://asipto.com/u/katu
 Kamailio Practical Workshop, Netherlands, Sep 10-12, 2012 -
 http://asipto.com/u/kpw





 __**_
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**usershttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] SIP Client for iphone

[Jason Penton]

I think you mean Bria?? ;)

On Fri, Jun 1, 2012 at 10:06 AM, Alex Balashov abalas...@evaristesys.comwrote:

 This is wildly off-topic for the list.

 That said, I recommend Brian.

 --
 This message was painstakingly thumbed out on my mobile, so apologies for
 brevity and errors.

 Alex Balashov - Principal
 Evariste Systems LLC
 235 E Ponce de Leon Ave
 Suite 106
 Atlanta, GA 30030
 Tel: +1-678-954-0670
 Fax: +1-404-961-1892
 Web: http://www.evaristesys.com/, http://www.alexbalashov.com

 On Jun 1, 2012, at 12:06 PM, Vijay Thakur vijay.tha...@loopmethods.com
 wrote:

  Dear All,
 
  Kindly suggest me the compatible client for iphone and Mac OS Leopard.
  I have found that Jisti is working very fine for all features on Linux
 and MS Windows.
 
  --
  Best Regards,
 
  Vijay Thakur
  (Assistant Manager - Networks)
  Mobile   : +91 8744018065
  Mail : vijay.tha...@loopmethods.com
 
  Loop IT Methods Private Limited
  1st Floor, B-10, Sector-7, Noida, (U.P) India
  Ph: +91 120 305 3481,82 (INDIA), +1 347 468 8631 (USA), +61 390 011 178(AUS)
  Fax: +91 971 728 330
  Web: www.loopmethods.com
 
  LOOP Disclaimer
 -
  This message (including any attachments) contains confidential
 information intended for a specific individual and purpose, and is
 protected by law. If you are not the intended recipient, you should delete
 this message and are hereby notified that any disclosure, copying, or
 distribution of this message, or the taking of any action based on it, is
 strictly prohibited.
 
 -
 
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio ignores some ACK

[Jason Penton]

Actually, sorry I misread your capture - it is using the same address so
doubt it the problem of interfaces..

Are you are not getting any logging in debug when the ACK comes in?

On Thu, May 10, 2012 at 9:08 AM, Jason Penton jason.pen...@smilecoms.comwrote:

 Hey Mino,

 From your packet captures above it looks like your ACK is coming in
 another IP address. I also see that you are doing the packet capture across
 all your physical interfaces (-i any). Perhaps your Kamailio is only
 configured to listen on the one interface (the one *not* getting the ACK).

 To test limit your packet capture to only the interface/s that you know
 Kamailio is listening on.

 Cheers
 Jason


 On Thu, May 10, 2012 at 8:59 AM, Mino Haluz mino.ha...@gmail.com wrote:

 We are troubleshooting this issue almost for 2 days and we did not find
 the solution yet. The thing is, that it does not enter even the config file
 (we have some debug messages at the start, that do not show). Otherwise we
 do not have any problem with ACK, but only this particular ACK is not
 forwarded... Was there some bug related to parsing in 3.1.0 which would not
 print any error to syslog?

 On Wed, May 9, 2012 at 4:41 PM, Jason Penton 
 jason.pen...@smilecoms.comwrote:

 Seems like a loose routing issue. Are you loose routing in your config
 file?


 On Wed, May 9, 2012 at 4:34 PM, Stoyan Mihaylov 
 stoyan.v.mihay...@gmail.com wrote:

 You can use something like wireshark on Kamailio server to see if ACK
 packets go in right direction.
 I had problem with ACK and BYE, and I saw that in some cases ACK and
 BYE packets looped back in kamailio.
 May be I used wrong client.


 On Wed, May 9, 2012 at 5:15 PM, Efelin Novak efelin.no...@gmail.comwrote:

 Hi folks,

 I have a strange problem when Kamailio ignores ACKs in a specific
 scenario. The call flow is as follows:

 A - INVITE - kamailio - INVITE - B
 [omitting 100 and 180]
 A - 200 OK - kamailio - 200 OK - B
 A - ACK - kamailio

 There are INVITE Xlogs, Reply ROUTE xlogs and media-proxy logs in the
 syslog. However there is no information about these ACKs. No XLOGs are
 printed even if there is one on the top of the main route.

 tcpdump -A -s0 -i any -n port 5060 receives this message correctly:

 14:47:01.246153 IP 111.111.11.11.5060  80.80.80.80.60442: SIP,
 length: 915
 SIP/2.0 200 OK
 Via: SIP/2.0/UDP
 111.111.11.11:5060
 ;rport=60442;x-route-tag=tgrp:A;branch=z9hG4bK1634E6A88
 Record-Route:
 sip:111.111.11.11;lr;ftag=599248D4-260;vsf=W0FVT0ZWHF1aNy4xGzA-;nat=yes;did=3bb.327c47e6
 Contact: sip:80.80.80.80:65002;transport=udp
 To: test_accountsip:b...@server.com;tag=cb7dd641
 From: sip:alice@111.111.11.50;tag=599248D4-260
 Call-ID: 9AFCFC51.11.50
 CSeq: 101 INVITE
 Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, OPTIONS, INFO,
 SUBSCRIBE, UPDATE
 Content-Type: application/sdp
 Content-Length:263

 v=0
 o=- 492575093 492575093 IN IP4 111.111.11.60
 s=test_device
 i=(o=IN IP4 192.168.1.10)
 c=IN IP4 111.111.11.71
 t=0 0
 m=audio 16416 RTP/AVP 18 101
 a=rtpmap:18 G729/8000
 a=fmtp:18 annexb=no
 a=rtpmap:101 telephone-event/8000
 a=fmtp:101 0-15
 a=ptime:20

 14:47:01.254511 IP 111.111.11.50.60442  111.111.11.11.5060: SIP,
 length: 521
 ACK sip:80.80.80.80:65002;transport=udp SIP/2.0
 Via: SIP/2.0/UDP
 111.111.11.50:5060;x-route-tag=tgrp:A;branch=z9hG4bK1634E7DE8
 From: sip:alice@111.111.11.50;tag=599248D4-260
 To: test_accountsip:b...@server.com;tag=cb7dd641
 Call-ID: 9AFCFC51.11.50
 Route:
 sip:111.111.11.11;lr;ftag=599248D4-260;vsf=W0FVT0ZWHF1aNy4xGzA-;nat=yes;did=3bb.327c47e6
 Max-Forwards: 70
 CSeq: 101 ACK
 Content-Length: 0

 My Kamailio version is kamailio 3.1.0 (i386/linux) 1e204f.
 Does anybody knows where can be a problem?
 How can I check whether Kamailio receives something?

 ...

 Jan

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


 This email is subject to the disclaimer of Smile Communications (PTY) Ltd. 
 at http://www.smilecoms.com/disclaimer


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER

Re: [SR-Users] Kamailio ignores some ACK

[Jason Penton]

Seems like a loose routing issue. Are you loose routing in your config file?

On Wed, May 9, 2012 at 4:34 PM, Stoyan Mihaylov stoyan.v.mihay...@gmail.com
 wrote:

 You can use something like wireshark on Kamailio server to see if ACK
 packets go in right direction.
 I had problem with ACK and BYE, and I saw that in some cases ACK and BYE
 packets looped back in kamailio.
 May be I used wrong client.


 On Wed, May 9, 2012 at 5:15 PM, Efelin Novak efelin.no...@gmail.comwrote:

 Hi folks,

 I have a strange problem when Kamailio ignores ACKs in a specific
 scenario. The call flow is as follows:

 A - INVITE - kamailio - INVITE - B
 [omitting 100 and 180]
 A - 200 OK - kamailio - 200 OK - B
 A - ACK - kamailio

 There are INVITE Xlogs, Reply ROUTE xlogs and media-proxy logs in the
 syslog. However there is no information about these ACKs. No XLOGs are
 printed even if there is one on the top of the main route.

 tcpdump -A -s0 -i any -n port 5060 receives this message correctly:

 14:47:01.246153 IP 111.111.11.11.5060  80.80.80.80.60442: SIP, length:
 915
 SIP/2.0 200 OK
 Via: SIP/2.0/UDP
 111.111.11.11:5060
 ;rport=60442;x-route-tag=tgrp:A;branch=z9hG4bK1634E6A88
 Record-Route:
 sip:111.111.11.11;lr;ftag=599248D4-260;vsf=W0FVT0ZWHF1aNy4xGzA-;nat=yes;did=3bb.327c47e6
 Contact: sip:80.80.80.80:65002;transport=udp
 To: test_accountsip:b...@server.com;tag=cb7dd641
 From: sip:alice@111.111.11.50;tag=599248D4-260
 Call-ID: 9AFCFC51.11.50
 CSeq: 101 INVITE
 Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, OPTIONS, INFO, SUBSCRIBE,
 UPDATE
 Content-Type: application/sdp
 Content-Length:263

 v=0
 o=- 492575093 492575093 IN IP4 111.111.11.60
 s=test_device
 i=(o=IN IP4 192.168.1.10)
 c=IN IP4 111.111.11.71
 t=0 0
 m=audio 16416 RTP/AVP 18 101
 a=rtpmap:18 G729/8000
 a=fmtp:18 annexb=no
 a=rtpmap:101 telephone-event/8000
 a=fmtp:101 0-15
 a=ptime:20

 14:47:01.254511 IP 111.111.11.50.60442  111.111.11.11.5060: SIP, length:
 521
 ACK sip:80.80.80.80:65002;transport=udp SIP/2.0
 Via: SIP/2.0/UDP
 111.111.11.50:5060;x-route-tag=tgrp:A;branch=z9hG4bK1634E7DE8
 From: sip:alice@111.111.11.50;tag=599248D4-260
 To: test_accountsip:b...@server.com;tag=cb7dd641
 Call-ID: 9AFCFC51.11.50
 Route:
 sip:111.111.11.11;lr;ftag=599248D4-260;vsf=W0FVT0ZWHF1aNy4xGzA-;nat=yes;did=3bb.327c47e6
 Max-Forwards: 70
 CSeq: 101 ACK
 Content-Length: 0

 My Kamailio version is kamailio 3.1.0 (i386/linux) 1e204f.
 Does anybody knows where can be a problem?
 How can I check whether Kamailio receives something?

 ...

 Jan

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] best way to start kamailio at boot

[Jason Penton]

Hi Sammy,

When you use the init script, it is starting Kamailio with the correct
arguments to get the environment you wish (-m 2048 probably). If however,
you just call kamailio these args are not there. Im not sure why you are
running with kamailio command directly. Why don't you add your init script
to the appropriate runlevel for auto startup?

Cheers
Jason

On Wed, Feb 1, 2012 at 3:06 PM, Uri Shacked ushac...@gmail.com wrote:

 Hi again

 i installed kamailio 3.2.2 today.
 i used the chkconfig tool to get kamailio run at boot.
 i edited both /etc/init.d/kamailio and /etc/default/kamailio files to run
 with 2048Mg of memory.
 now, when i run /etc/init.d/kamailio start, it starts with the right
 amount of memory.
 when i rum kamailio only, it starts with 32Mb

  i use centos 6.2 64bit.
 any ideas?





 On Tue, Oct 25, 2011 at 1:18 PM, Uri Shacked ushac...@gmail.com wrote:

 Hi.
 I already checked it all. The kamailio start and stop command did not
 work. The init script i used was for debian. Now i use another script,
 for centos. It works. I add the kamailio proccess with chkconfig tool.
 Thanks.

 On 10/25/11, Sammy Govind govoi...@gmail.com wrote:
  Thanks Alex,
 
  Hey Uri, can you check if you've /etc/init.d/kamailio file exists - open
  that file if exists and cross verify few parameters.
  Few of these are as follows
 
  PATH=/sbin:/bin:/usr/sbin:/usr/bin
  DAEMON=*/usr/local/sbin/kamailio*
  NAME=kamailio
  DESC=kamailio
  HOMEDIR=/var/run/
  *PIDFILE*=$HOMEDIR/$NAME.pid
  DEFAULTS=*/etc/default/kamailio.default*
   RUN_KAMAILIO=yes
 
  Make sure /etc/default/kamailio.default file exits. here are the
 contents of
  my file.
 
  RUN_KAMAILIO=yes
  USER=kamailio
  GROUP=kamailio
  MEMORY=64
  DUMP_CORE=no
 
  On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion 
  klaus.mailingli...@pernau.at wrote:
 
  Test the startupscript if they work:
 
  /etc/init.d/kamailio start
  /etc/init.d/kamailio stop
 
  If this works, then make sure to have proper symlinks from the
  corresponding runlevel to the startup script. Do it manually or use the
  chkconfig tool.
 
  klaus
 
 
  On 24.10.2011 08:00, Uri Shacked wrote:
 
  hi again,
  i found out that on my centos 5.4 the command start-stop-daemon that
 the
  /etc/init.d/kamailio uses is not recognized.
  it is kamailio3.2 any ideas?
 
 
  On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked ushac...@gmail.com
  mailto:ushac...@gmail.com wrote:
 
 Hi,
 what is the best way to start kamailio at boot?
 the example in the install is not working for me
 
 
 
 
  __**_
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
 list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
 
 
  __**_
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
 
 

 --
 Sent from my mobile device



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at 
http://www.smilecoms.com/disclaimer
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] How to limit number of calls in Kamailio proxy

[Jason Penton]

Hi Austin,

Have a look at the TM module docs. You will find the appropriate commands
there.

HTH
On Nov 3, 2011 3:01 AM, Austin Einter austin.ein...@gmail.com wrote:

 Dear Andrew, Henning
 Thanks for sharing very useful information.
 I am bit new to kamailio, probably askingvery easy questions, please bear
 with me.

 I am not sure if I am forwording the INVITE statelessly or not.
 How do I check if INVITE is forwarded statelessly.
 Andrew you have mentioned 'So make sure that a transaction exists or
 create it
 explicitly using the tm module.

 Not sure, how do I check if transaction exists or not. And how can I
 create it.

 Please give me some pointers or a sample config file.

 Regards,
 Austin


 On Mon, Oct 31, 2011 at 4:37 PM, Andrew Pogrebennyk 
 apogreben...@sipwise.com wrote:

 Austin,
 That is strange, because I am using similar setup successfully. Actually
 I don't know if it counts the calls that are being established, I didn't
 care for it.

 While looking through the docs:
 http://kamailio.org/docs/modules/3.1.x/modules_k/dialog.html#id2524304
  the following note caught my eye:

 IMPORTANT: Users of this function should make sure that the dialog
 created is further processed statefully. Specifically, if a stateless
 response is sent out after dlg_manage() is called, the dialog cannot be
 handled properly. So make sure that a transaction exists or create it
 explicitly using the tm module. This is a shortcoming of the current
 implementation that may be resolved in a future version hopefully.

 Could it be that you are forwarding the INVITE statelessly?
 Regards,
 Andrew

 On 10/30/2011 01:08 PM, Austin Einter wrote:
  Thanks Andrew
  I added profile_with_value module parameter and with that I am able to
  overcome this error.
 
  My code looks as below.
 
  dlg_manage();
  if (is_method(INVITE)) {
   if (!has_totag()) {
  #$var(SIZE) = 0;
  get_profile_size(caller, $fu, $var(SIZE));
  xlog(Number of calls present now is
  $var(SIZE)\n);
  if( $var(SIZE)  MAX_NUMBER_OF_CALLS ) {
  sl_send_reply(503, Simultaneous calls
  limit reached);
  xlog(Rejected calls with 503
  Simultaneous calls limit reached\n);
  exit;
  }
  else {
   xlog(Allowed call. Looks max calls
  limit not reached. Calls= $var(SIZE)\n);
  }
  set_dlg_profile(caller,$fu);
  }
  }
  Whole purpose is to limit number of active calls at any point of time.
  $var(SIZE) gives the number of calls are being established, but not the
  number of calls are already established.
 
  So if I am making multiple calls at  a point of time, it is blocking
  call attempts beyond limit. But after all call setup complete, again
  $var(SIZE) becomes zero and allows new calls.
 
 
  Has anybody done this (limiting number of calls at any point of time).
  If so can you please share the configuration file changes.
 
 
  To get $var(SIZE) working properly, do I need to enable MySql, please
  advice.
 
  Regards
  Austin
 


  ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] How to limit maximum number of calls

[Jason Penton]

Hey,

U can use these docs in the meantime -
http://kamailio.org/docs/modules/stable/modules_k/dialog.html

Cheers
Jason

On Fri, Oct 28, 2011 at 11:36 AM, Timo Reimann s...@foo-lounge.de wrote:

 Hey,


 Am 28.10.2011 um 07:29 schrieb Austin Einter:
  I did change kamailio.cfg as below and getting some error.

 [snip]


  When I start the kamailio proxy I get below error.
 
  [root@www1 kamailio]#
  [root@www1 kamailio]# kamailio -T -E -n 1 -l 174.37.8.178 -l 127.0.0.1
 -W epoll_et -l udp:174.37.8.178:26588
  loading modules under
 /usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/
  Listening on
   udp: 174.37.8.178:26588
   udp: 127.0.0.1:26588
  Aliases:
   udp: localhost:26588
   udp: localhost.localdomain:26588
   udp: 174.37.8.178-static.reverse.softlayer.com:26588
   0(26959) INFO: usrloc [hslot.c:53]: locks array size 512
   0(26959) ERROR: dialog [dialog.c:435]: no dlg flag set!!
   0(26959) ERROR: core [sr_module.c:875]: init_mod(): Error while
 initializing module dialog (/usr/local/lib/kamailio/modules_k/dialog.so)
  ERROR: error while initializing modules
  [root@www1 kamailio]#
  [root@www1 kamailio]#
 
  It looks , dialog module facing problem during initialization.
 
  I am bit new to this, not getting any clue . Kindly let me know whats
 going wrong.

 no dlg flag set

 Using the dialog module requires either one of the following for each
 dialog you wish to track:

 - Set a certain flag. This tells the dialog module to start tracking. It
 only works for INVITE requests though and requires specifying the desired
 dialog flag as a modparam.
 - Call dlg_manage(). This also tells the dialog module to start tracking
 but may be called from non-INVITE requests too (at least theoretically; I
 never tried).

 Unfortunately, the wiki docs regarding the dialog module seem to be broken
 right now, so I cannot point you at the specific syntax.


 HTH,

 --Timo
 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio with IMS extensions build

[Jason Penton]

Hi Loïc

This post is best suited for the developer list. There is a problem here
with the fact that Client_Ro requires some extra API function in the dialog
module which are not part of the stock kamailio dialog module. I could give
you a fix but we are currently finalising an overhaul to sort these small
incompatibilities out. We will be releasing in the next week to 10 days

It also seems like the changes we made to cdp_avp have also not been
included in Carsten's branch. another reason to just hang 5 till we release

Sorry for inconvenience

Cheers
Jason

On Tue, Sep 27, 2011 at 11:22 AM, loic.trot...@orange.com wrote:

 **
 Hi all,

 I try to compile Kamailio with IMS extensions from OpenIMSCore available
 in carstenbock/ims branch in the GIT repository.
 I have some problems with the modules Client_Ro and pcscf that do not
 compile:

 CC (gcc) [M Client_Ro.so]   ims_ro.o
 ims_ro.c: In function ‘send_ccr_interim’:
 ims_ro.c:594: error: ‘AVP_EPC_User_Equipment_Info_Type_MAC’ undeclared
 (first use in this function)
 ims_ro.c:594: error: (Each undeclared identifier is reported only once
 ims_ro.c:594: error: for each function it appears in.)
 ims_ro.c: In function ‘send_ccr_stop’:
 ims_ro.c:749: error: ‘AVP_EPC_User_Equipment_Info_Type_MAC’ undeclared
 (first use in this function)
 ims_ro.c: In function ‘Ro_Send_CCR’:
 ims_ro.c:831: error: ‘struct dlg_binds’ has no member named ‘get_dlg’
 ims_ro.c:835: error: ‘struct dlg_binds’ has no member named ‘unref_dlg’
 ims_ro.c:886: error: ‘AVP_EPC_User_Equipment_Info_Type_MAC’ undeclared
 (first use in this function)
 CC (gcc) [M pcscf.so]   pcc_avp.o
 pcc_avp.c:1459: error: ‘AVP_IMS_Subscription_Id_Type_E164’ undeclared
 (first use in this function)
 pcc_avp.c:1459: error: (Each undeclared identifier is reported only once
 pcc_avp.c:1459: error: for each function it appears in.)
 pcc_avp.c:1461: error: ‘AVP_IMS_Subscription_Id_Type_SIP_URI’ undeclared
 (first use in this function)
 Does anybody have encountered these problems?
 Is there a stable version tagged of the branch carstenbock/ims available in
 the GIT repository ?

 Best regards,

 Loïc.



 
 IMPORTANT.Les informations contenues dans ce message electronique y compris 
 les fichiers attaches sont strictement confidentielles
 et peuvent etre protegees par la loi.
 Ce message electronique est destine exclusivement au(x) destinataire(s) 
 mentionne(s) ci-dessus.
 Si vous avez recu ce message par erreur ou s il ne vous est pas destine, 
 veuillez immediatement le signaler  a l expediteur et effacer ce message
 et tous les fichiers eventuellement attaches.
 Toute lecture, exploitation ou transmission des informations contenues dans 
 ce message est interdite.
 Tout message electronique est susceptible d alteration.
 A ce titre, le Groupe France Telecom decline toute responsabilite notamment s 
 il a ete altere, deforme ou falsifie.
 De meme, il appartient au destinataire de s assurer de l absence de tout 
 virus.

 IMPORTANT.This e-mail message and any attachments are strictly confidential 
 and may be protected by law. This message is
 intended only for the named recipient(s) above.
 If you have received this message in error, or are not the named 
 recipient(s), please immediately notify the sender and delete this e-mail 
 message.
 Any unauthorized view, usage or disclosure ofthis message is prohibited.
 Since e-mail messages may not be reliable, France Telecom Group shall not be 
 liable for any message if modified, changed or falsified.
 Additionally the recipient should ensure they are actually virus free.
 


 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Open source HLR (Home Location Register).

[Jason Penton]

I'm assuming you are looking IMS specific - in which case the HLR is called
an HSS. I only know of one open source one - FhoSS which is part of the
openimscore - www.openimscore.org

HTH

Cheers
Jason

2011/8/9 Henrik Aagaard Sørensen henrikaagaardsoren...@gmail.com

 I know this is the mailing list for Kamailio, but hopefully someone can
 help me out as it is kinda related to VoIP etc.

 Does anyone know any open source / free HLR implementation?

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio - ISC interface

[Jason Penton]

Hi Rocio,

As Carsten mentioned ISC is simpy SIP so you can configure your config file
to forward to your SIP AS based on whatever method you want. What you won't
have by default is the IMS trigger points (IFCs), etc which is IMS specific
functionality.

Cheers
Jason

On Wed, Jul 27, 2011 at 9:05 PM, Rocío Ruz rocio...@gmail.com wrote:

 Hi,

 Thank you for your help.
 I am not sure of understanding.
 Would it be possible to install kamailio (simple version, without any IMS
 extension ) just as a SIP proxy and SIP Registrar and to configure it to
 trigger an external (no Kamailio) AS?

 Thank you.

 RR.



 2011/7/27 Carsten Bock cars...@ng-voice.com

 Hi,

 you may create a simple AS based on Kamailio without any extensions.
 I actually use a Kamailio as a Presence AS and another Kamailio as a
 (very limited) MMTel-AS in my IMS setup (although i will probably
 replace the MMTel-AS based on Kamailio with a solution based on SEMS
 in the near future).
 It depends on your requirements: As per IMS-specs, the AS should store
 it's data (e.g. Call-Forwarding) in via the Sh-Interface in the HSS.
 Kamailio (per se) has no options (yet) to do so.
 The ISC Interface is nothing else than SIP anyway.

 Carsten

 2011/7/26 Rocío Ruz rocio...@gmail.com:
  Hello,
 
  I was wondering if it would be possible to plug an Application Server on
  Kamilio solution using the ISC interface (other than the AS module
 provided
  with Kamailio solution).
  Would it be mandatory to use IMS extensions to do so?
 
  Thank you.
 
  RR
 
  ___
  SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
  sr-users@lists.sip-router.org
  http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
 
 



 --
 Carsten Bock
 http://www.ng-voice.com
 mailto:cars...@ng-voice.com

 Schomburgstr. 80
 22767 Hamburg
 Germany

 Mobile +49 179 2021244
 Office +49 40 34927219
 Fax +49 40 34927220

 ~
 Checkout SIP-Provider CE:
 http://www.sipwise.com/products/spce/overview/

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio - IMS extensions

[Jason Penton]

yes you can, the scscfs must be configured to listen on different ports.

On Wed, Jul 27, 2011 at 9:00 PM, Rocío Ruz rocio...@gmail.com wrote:

 Hello,

 I would like to use kamailio and its IMS extensions.
 Is it mandatory to install and run each module (s-cscf, i-cscf, p-cscf,
 Hss) on different machines?
 Could I just install/run all the modules on the same VM?

 Thank you.

 RR

 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Fresh Kamailio installation doesn't require authorization.

[Jason Penton]

Henrik,

it would help if you attached the config file

Cheers
Jason

2011/7/25 Henrik Aagaard Sørensen henrikaagaardsoren...@gmail.com

 Can someone help me with the issue of no authentication in Kamailio?


 2011/7/24 Henrik Aagaard Sørensen henrikaagaardsoren...@gmail.com

 I've installed Kamailio on Ubuntu 10.04 LTS via:
 http://www.kamailio.org/dokuwiki/doku.php/packages:debs

 Updated /etc/kamailio/kamctlrc with: SIP_DOMAIN=MY-IP DBENGINE=MYSQL

 I've also installed the kamailio-mysql-modules via apt-get.

 Then I've run kamdbctl create and created the MySQL database.

 After that I've started Kamailio via kamctl start. Success.

 At last I've added two users: kamctl add 100 PASS1 kamctl add 101 PASS2

 Everything seems to work, but I've found out that everyone can register
 and call via the server. Not only the two users/subscribers I've added.
 How come authorization isn't working?



 ___
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] issue tracking system

[Jason Penton]

+1 for Jira. If you have the resources to setup and manage JIRA then I would
suggest this too. We use and it is really very good

On Tue, Jul 19, 2011 at 8:05 PM, Alex Balashov abalas...@evaristesys.comwrote:

 We have been extremely happy with Mantis as a self-hosted approach. It is
 easy to use, yet has the sophistication and flexibility for a needed to
 manage a project of non-trivial size.

 On the other hand, Digium recently moved away from it in favour of JIRA for
 issues.asterisk.org.

 For fairly large projects like this one[1], I have always favoured internal
 hosting of such systems in order to maintain maximum control, use optional
 plugins, make customisations, etc.  I think that would make the most sense
 for the SR/Kamailio community.

 -- Alex

 [1] It's not nearly as large as say, the Linux kernel, but it's bigger than
 99% of open-source which, after all, consists largely of projects done by
 one person or a few people at most.

 --
 Alex Balashov - Principal
 Evariste Systems LLC
 260 Peachtree Street NW
 Suite 2200
 Atlanta, GA 30303
 Tel: +1-678-954-0670
 Fax: +1-404-961-1892
 Web: http://www.evaristesys.com/

 __**_
 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
 sr-users@lists.sip-router.org
 http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**usershttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] [sr-dev] issue tracking system

[Jason Penton]

Hey Juha,

yes it does - here is an example of another project I work with that uses
the issuetracker of code.google:

http://code.google.com/p/doubango/issues/list



On Tue, Jul 19, 2011 at 7:03 PM, Juha Heinanen j...@tutpro.com wrote:

 Daniel-Constantin Mierla writes:

  Opinions?

 i read somewhere that code.google.com now supports git.  it also
 includes an issues tracker, but i don't know how good it is.

 -- juha

 ___
 sr-dev mailing list
 sr-...@lists.sip-router.org
 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users