Re: [SR-Users] AVP Error in version 3.1.0
Yes this happens in a testing environment..
I got your point, we saved after t-relay to send the message faster as db save
can cause delay.
We will make the changes as per your suggestion .
Thanks
Jijo
On Feb 18, 2011, at 4:11 AM, Daniel-Constantin Mierla mico...@gmail.com wrote:
Hello,
is any particular reason to do the processing after t_relay() ? You can do
the save before, since it is the same register message.
Also, are you getting this in a testing environment while using tools like
sipp to simulate traffic?
Starting with 3.0, the AVPs (which are associated with the message and
transaction in this case) become available in onreply_route[3] (in 1.x that
was a config option for tm module), so if it is fast reply, it my happen that
the avps are no longer available in the script after t_relay().
As a recommended rule, it is better to avoid using avps after t_relay() -
this function creates the transaction and forwards the message. From there
on, the avps are in the hands of tm module, which moves them to onreply_route
or failure_route, depending on your config file.
Cheers,
Daniel
On 2/16/11 4:28 PM, Jijo wrote:
Hi Daniel,
Please find the code and corresponding error trace. This happens only for 1
subscriber randomly out of 2000 subscribers. This can be reproduced
consistently also.
route(1)
{
:
:
:
# -
# Registration handling dynamic endpoints
# -
$avp(reg_contact)= $ct;
$var(reg_contact)= $ct;
t_on_reply(3);
if(!is_avp_set($avp(reg_contact)))
xlog(L_ERR, R1 - not set the reg_contact3 F=$fu T=$tu Ct=$ct
IP=$si CI=$ci var_contact:$var(reg_contact)\n);
# relay
if(!t_relay_to(0x3))
{
xlog(L_ERR, R1/R10 - Registration failed - M=$rm F=$fu T=$tu
CT=$ct IP=$si CI=$ci\n);
append_to_reply(Warning: 399 $Ri - R1 - Registration failed:
fail in relay in R10.\r\n);
sl_reply_error();
exit;
}
if(!is_avp_set($avp(reg_contact)))
xlog(L_ERR, R1 - not set the reg_contact4 F=$fu T=$tu Ct=$ct
IP=$si CI=$ci var_contact:$var(reg_contact)\n);
xlog(L_ERR, R1 - Saving Registration-2 save to location F=$fu
T=$tu Ct=$ct IP=$si CI=$ci reg_ct:$avp(reg_contact)\n);
if(!isflagset(28) is_avp_set($avp(reg_contact))) # Check if we
need to save it in location table
{
if(!save(location,0x02))
{
xlog(L_ERR, R1 - Location save for Registration failed -
M=$rm F=$fu T=$tu IP=$si CT=$ct\n);
}
}
LOGS for the error condtion.
2011-02-15T12:19:30-05:00 [err] sipserver: ERROR: script: R1 - not set the
reg_contact4 F=sip:5614510478@10.235.86.54:5060;transport=UDP
T=sip:5614510478@10.235.86.54:5060;transport=UDP
Ct=sip:5614510478@10.235.204.5:5060 IP=10.235.204.5
CI=119ac328-4cceb0a-13c4-7fa55-76a2903a-7fa55
var_contact:sip:5614510478@10.235.204.5:5060
2011-02-15T12:19:30-05:00 [err] sipserver: ERROR: script: R1 - Saving
Registration-2 save to location
F=sip:5614510478@10.235.86.54:5060;transport=UDP
T=sip:5614510478@10.235.86.54:5060;transport=UDP
Ct=sip:5614510478@10.235.204.5:5060 IP=10.235.204.5
CI=119ac328-4cceb0a-13c4-7fa55-76a2903a-7fa55 reg_ct:null
On Wed, Feb 16, 2011 at 5:02 AM, Daniel-Constantin Mierla
mico...@gmail.com wrote:
Hello,
it is not clear for me what you tried to do. Can you paste here the parts of
the config file that are relevant for the case? Do you relay the REGISTER?
Cheers,
Daniel
On 2/16/11 1:17 AM, Jijo wrote:
Hi All,
On register we store the contact in an avp variable and do a t_relay().
After t_relay() the $avp variable becomes null.
I printed the value before after t_relay() to determine this behavior.
This happens only on registration load test around 2000 subcribers with ( 4
REGISTER/sec). This happens only for one subscriber out of 2000
subscribers.
I did the similar test with $var and its working fine.
Anybody observed similar behavior with avp? This was working in kamailio
1.4 version. We did the upgrade recently to 3.1.0 and started observing
this issue.
How do we debug this issue.?
Thanks
Jijo
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://www.asipto.com
--
Daniel-Constantin Mierla
http://www.asipto.com
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Re: [SR-Users] AVP Error in version 3.1.0
Hello,
is any particular reason to do the processing after t_relay() ? You can
do the save before, since it is the same register message.
Also, are you getting this in a testing environment while using tools
like sipp to simulate traffic?
Starting with 3.0, the AVPs (which are associated with the message and
transaction in this case) become available in onreply_route[3] (in 1.x
that was a config option for tm module), so if it is fast reply, it my
happen that the avps are no longer available in the script after t_relay().
As a recommended rule, it is better to avoid using avps after t_relay()
- this function creates the transaction and forwards the message. From
there on, the avps are in the hands of tm module, which moves them to
onreply_route or failure_route, depending on your config file.
Cheers,
Daniel
On 2/16/11 4:28 PM, Jijo wrote:
Hi Daniel,
Please find the code and corresponding error trace. This happens only
for 1 subscriber randomly out of 2000 subscribers. This can be
reproduced consistently also.
route(1)
{
:
:
:
#
-
# Registration handling dynamic endpoints
#
-
$avp(reg_contact)= $ct;
$var(reg_contact)= $ct;
t_on_reply(3);
if(!is_avp_set($avp(reg_contact)))
xlog(L_ERR, R1 - not set the reg_contact3 F=$fu T=$tu
Ct=$ct IP=$si CI=$ci var_contact:$var(reg_contact)\n);
# relay
if(!t_relay_to(0x3))
{
xlog(L_ERR, R1/R10 - Registration failed - M=$rm F=$fu
T=$tu CT=$ct IP=$si CI=$ci\n);
append_to_reply(Warning: 399 $Ri - R1 - Registration
failed: fail in relay in R10.\r\n);
sl_reply_error();
exit;
}
if(!is_avp_set($avp(reg_contact)))
xlog(L_ERR, R1 - not set the reg_contact4 F=$fu T=$tu
Ct=$ct IP=$si CI=$ci var_contact:$var(reg_contact)\n);
xlog(L_ERR, R1 - Saving Registration-2 save to location
F=$fu T=$tu Ct=$ct IP=$si CI=$ci reg_ct:$avp(reg_contact)\n);
if(!isflagset(28) is_avp_set($avp(reg_contact))) # Check if we
need to save it in location table
{
if(!save(location,0x02))
{
xlog(L_ERR, R1 - Location save for Registration
failed - M=$rm F=$fu T=$tu IP=$si CT=$ct\n);
}
}
LOGS for the error condtion.
2011-02-15T12:19:30-05:00 [err] sipserver: ERROR: script: R1 - not
set the reg_contact4 F=sip:5614510478@10.235.86.54:5060;transport=UDP
T=sip:5614510478@10.235.86.54:5060;transport=UDP
Ct=sip:5614510478@10.235.204.5:5060
http://sip:5614510478@10.235.204.5:5060 IP=10.235.204.5
CI=119ac328-4cceb0a-13c4-7fa55-76a2903a-7fa55
var_contact:sip:5614510478@10.235.204.5:5060
http://sip:5614510478@10.235.204.5:5060
2011-02-15T12:19:30-05:00 [err] sipserver: ERROR: script: R1 -
Saving Registration-2 save to location
F=sip:5614510478@10.235.86.54:5060;transport=UDP
T=sip:5614510478@10.235.86.54:5060;transport=UDP
Ct=sip:5614510478@10.235.204.5:5060
http://sip:5614510478@10.235.204.5:5060 IP=10.235.204.5
CI=119ac328-4cceb0a-13c4-7fa55-76a2903a-7fa55 reg_ct:null
On Wed, Feb 16, 2011 at 5:02 AM, Daniel-Constantin Mierla
mico...@gmail.com mailto:mico...@gmail.com wrote:
Hello,
it is not clear for me what you tried to do. Can you paste here
the parts of the config file that are relevant for the case? Do
you relay the REGISTER?
Cheers,
Daniel
On 2/16/11 1:17 AM, Jijo wrote:
Hi All,
On register we store the contact in an avp variable and do a
t_relay(). After t_relay() the $avp variable becomes null.
I printed the value before after t_relay() to determine this
behavior.
This happens only on registration load test around 2000
subcribers with ( 4 REGISTER/sec). This happens only for one
subscriber out of 2000 subscribers.
I did the similar test with $var and its working fine.
Anybody observed similar behavior with avp? This was working in
kamailio 1.4 version. We did the upgrade recently to 3.1.0 and
started observing this issue.
How do we debug this issue.?
Thanks
Jijo
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org mailto:sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://www.asipto.com
--
Daniel-Constantin Mierla
http://www.asipto.com
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Re: [SR-Users] AVP Error in version 3.1.0
Hello, it is not clear for me what you tried to do. Can you paste here the parts of the config file that are relevant for the case? Do you relay the REGISTER? Cheers, Daniel On 2/16/11 1:17 AM, Jijo wrote: Hi All, On register we store the contact in an avp variable and do a t_relay(). After t_relay() the $avp variable becomes null. I printed the value before after t_relay() to determine this behavior. This happens only on registration load test around 2000 subcribers with ( 4 REGISTER/sec). This happens only for one subscriber out of 2000 subscribers. I did the similar test with $var and its working fine. Anybody observed similar behavior with avp? This was working in kamailio 1.4 version. We did the upgrade recently to 3.1.0 and started observing this issue. How do we debug this issue.? Thanks Jijo ___ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla http://www.asipto.com ___ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Re: [SR-Users] AVP Error in version 3.1.0
Hi Daniel,
Please find the code and corresponding error trace. This happens only for 1
subscriber randomly out of 2000 subscribers. This can be reproduced
consistently also.
route(1)
{
:
:
:
# -
# Registration handling dynamic endpoints
# -
$avp(reg_contact)= $ct;
$var(reg_contact)= $ct;
t_on_reply(3);
if(!is_avp_set($avp(reg_contact)))
xlog(L_ERR, R1 - not set the reg_contact3 F=$fu T=$tu Ct=$ct
IP=$si CI=$ci var_contact:$var(reg_contact)\n);
# relay
if(!t_relay_to(0x3))
{
xlog(L_ERR, R1/R10 - Registration failed - M=$rm F=$fu T=$tu
CT=$ct IP=$si CI=$ci\n);
append_to_reply(Warning: 399 $Ri - R1 - Registration failed:
fail in relay in R10.\r\n);
sl_reply_error();
exit;
}
if(!is_avp_set($avp(reg_contact)))
xlog(L_ERR, R1 - not set the reg_contact4 F=$fu T=$tu Ct=$ct
IP=$si CI=$ci var_contact:$var(reg_contact)\n);
xlog(L_ERR, R1 - Saving Registration-2 save to location F=$fu
T=$tu Ct=$ct IP=$si CI=$ci reg_ct:$avp(reg_contact)\n);
if(!isflagset(28) is_avp_set($avp(reg_contact))) # Check if we
need to save it in location table
{
if(!save(location,0x02))
{
xlog(L_ERR, R1 - Location save for Registration failed -
M=$rm F=$fu T=$tu IP=$si CT=$ct\n);
}
}
LOGS for the error condtion.
2011-02-15T12:19:30-05:00 [err] sipserver: ERROR: script: R1 - not set the
reg_contact4 F=sip:5614510478@10.235.86.54:5060;transport=UDP
T=sip:5614510478@10.235.86.54:5060;transport=UDP Ct=
sip:5614510478@10.235.204.5:5060 IP=10.235.204.5
CI=119ac328-4cceb0a-13c4-7fa55-76a2903a-7fa55 var_contact:
sip:5614510478@10.235.204.5:5060
2011-02-15T12:19:30-05:00 [err] sipserver: ERROR: script: R1 - Saving
Registration-2 save to location
F=sip:5614510478@10.235.86.54:5060;transport=UDP
T=sip:5614510478@10.235.86.54:5060;transport=UDP Ct=
sip:5614510478@10.235.204.5:5060 IP=10.235.204.5
CI=119ac328-4cceb0a-13c4-7fa55-76a2903a-7fa55 reg_ct:null
On Wed, Feb 16, 2011 at 5:02 AM, Daniel-Constantin Mierla mico...@gmail.com
wrote:
Hello,
it is not clear for me what you tried to do. Can you paste here the parts
of the config file that are relevant for the case? Do you relay the
REGISTER?
Cheers,
Daniel
On 2/16/11 1:17 AM, Jijo wrote:
Hi All,
On register we store the contact in an avp variable and do a t_relay().
After t_relay() the $avp variable becomes null.
I printed the value before after t_relay() to determine this behavior.
This happens only on registration load test around 2000 subcribers with ( 4
REGISTER/sec). This happens only for one subscriber out of 2000
subscribers.
I did the similar test with $var and its working fine.
Anybody observed similar behavior with avp? This was working in kamailio
1.4 version. We did the upgrade recently to 3.1.0 and started observing this
issue.
How do we debug this issue.?
Thanks
Jijo
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierlahttp://www.asipto.com
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
[SR-Users] AVP Error in version 3.1.0
Hi All, On register we store the contact in an avp variable and do a t_relay(). After t_relay() the $avp variable becomes null. I printed the value before after t_relay() to determine this behavior. This happens only on registration load test around 2000 subcribers with ( 4 REGISTER/sec). This happens only for one subscriber out of 2000 subscribers. I did the similar test with $var and its working fine. Anybody observed similar behavior with avp? This was working in kamailio 1.4 version. We did the upgrade recently to 3.1.0 and started observing this issue. How do we debug this issue.? Thanks Jijo ___ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
