[freenet-support] Newbie can't connect.
Hello Freenet Guru's, I've been trying for the last few weeks to get a Freenet node working on Win Xp (SP 2), and although I'm not networking champion, I think I've done everything I should. I've opened up the correct port in my ADSL Modem / Router / Firewall and yet I still can't get anywhere. Even when I switch to Dial up, I still have the same trouble, which is, when I open the Gateway it says Build 5106 and stops at 5%, unless I keep hitting refresh in which I can get it go to 40% before the refresh refuses to have any further effect. I've got the DNS update service running (non static IP) and have put that in the config file. I've changed the max number of connections, but have since forgotten what I changed it to; it was to a recommendation I read somewhere on the Wiki. I've also tried to download the latest seednode info from http://www.freenetproject.org/snapshots/ and also using the "update Snapshot" program, which downloads the Jaw update fine but times-out every single attempt on the seednode update part. Any attempt to download the seednode update always times-out. No thumbnail images load on the main gateway page either...if that makes sense. I"m no expert so I'm really stuffed for anymore solutions. It doesn't seem to be my router, as even when I use dial up, I still have exactly the same results. I could really use some help, as my problem is probably very obvious to somebody with more networking knowledge than I currently have. I've posted below all the details I think might be useful from the Gateway Page. Thanks heaps in advance to anybody who tries to help. Merry Xmas from NZ! --- Node Version0.5 Protocol VersionSTABLE-1.51 Build Number5106 CVS Revision1.90.2.50.2.134 Current routingTime 0ms Current messageSendTimeRequest 0ms Pooled threads running jobs 19 (15.8%) Pooled threads which are idle 4 Current estimated load for QueryReject purposes 15% Current estimated load for rate limiting15.8% Reason for load:Load due to thread limit = 15.8% Load due to routingTime = 10% = 100ms / 1000ms <= overloadLow (100%) Load due to messageSendTimeRequest = 20% = 100ms / 500ms <= overloadLow (100%) Load due to expected inbound transfers: 0% because: 3600.0 req/hr * 0.0625 (pTransfer) * 0.0 bytes = 0 bytes/hr expected from current requests, but maxInputBytes/minute = 0 (max observed bytes per minute) * 60 * 1.1 = 0 bytes/hr target Estimated external pSearchFailed (based only on QueryRejections due to load): 1.0 Current estimated requests per hour:763.6995942039521 Current global quota (requests per hour): 3879.304592653721 Highest seen bytes downloaded in one minute:0 Current outgoing request rate 3600.0 Current probability of a request succeeding by routing ? Current probability of an inbound request causing a transfer outwards 50% Current target (best case single node) probability of a request succeeding 0% Sun Dec 18 19:43:37 NZDT 2005 [More details] Connections open (Inbound/Outbound/Limit) 0 (0/0/50) Transfers active (Transmitting/Receiving) 0 (0/0) Data waiting to be transferred None Total amount of data transferred1,811 Bytes Outbound connections legend Inbound connections legend IdleIdle Transmitting data Transmitting data Receiving data Receiving data Receiving and transmitting data Receiving and transmitting data Number of requests (sent/received) 0/0 -- 2005-12-18 19:44:44.281 NZDT * Smoothed local mean traffic (queries per hour): 1.000 * Smoothing half life (lsHalfLifeHours): 1.200 hour. That is, the rate decays completely to a new value after 12.000 hour. * Instantaneous local traffic: 0.000 queries per hour. That is, the last 0 queries arrived in 1134888284.281 second or 315246.746 hour. * Current proportion of requests being accepted: 1.000 * Current advertise probability: 0.050 * Traffic data from 2 nodes (max allowed 100), of which 2 were used. The oldest 5% and the smallest and largest 5% (up to 10% if the table is not full) are not used in computing statistics. * Global mean traffic per node (queries per hour): 1.000 * Global median traffic per node (queries per hour): 1.000 * Standard Deviation of global traffic per node: 0.000 Class Queries per houras of Node fingerprint Used1 2005-12-18 19:39:03.390 NZDT0x0 : Used1 2005-12-18 19:44:44.281 NZDT0x0 : Uptime: 0 days, 0 hours, 4 minutes Current routingTime: 0ms. Pooled threads running jobs: 19 (15.8%) Pooled threads which are idle: 6 Current estimated load for rate limiting: 15.8%. Load due to thread limit = 15.8% Load due to routingTime = 10% = 100ms / 1000ms <= overloadLow (100%) Load due to messageSendTimeRequest = 20% = 100ms / 500ms <= overloadLow (100%) Load due to expected inbound transfers: 0%
[freenet-support] Newbie can't connect.
Hello Freenet Guru's, I've been trying for the last few weeks to get a Freenet node working on Win Xp (SP 2), and although I'm not networking champion, I think I've done everything I should. I've opened up the correct port in my ADSL Modem / Router / Firewall and yet I still can't get anywhere. Even when I switch to Dial up, I still have the same trouble, which is, when I open the Gateway it says Build 5106 and stops at 5%, unless I keep hitting refresh in which I can get it go to 40% before the refresh refuses to have any further effect. I've got the DNS update service running (non static IP) and have put that in the config file. I've changed the max number of connections, but have since forgotten what I changed it to; it was to a recommendation I read somewhere on the Wiki. I've also tried to download the latest seednode info from http://www.freenetproject.org/snapshots/ and also using the update Snapshot program, which downloads the Jaw update fine but times-out every single attempt on the seednode update part. Any attempt to download the seednode update always times-out. No thumbnail images load on the main gateway page either...if that makes sense. Im no expert so I'm really stuffed for anymore solutions. It doesn't seem to be my router, as even when I use dial up, I still have exactly the same results. I could really use some help, as my problem is probably very obvious to somebody with more networking knowledge than I currently have. I've posted below all the details I think might be useful from the Gateway Page. Thanks heaps in advance to anybody who tries to help. Merry Xmas from NZ! --- Node Version0.5 Protocol VersionSTABLE-1.51 Build Number5106 CVS Revision1.90.2.50.2.134 Current routingTime 0ms Current messageSendTimeRequest 0ms Pooled threads running jobs 19 (15.8%) Pooled threads which are idle 4 Current estimated load for QueryReject purposes 15% Current estimated load for rate limiting15.8% Reason for load:Load due to thread limit = 15.8% Load due to routingTime = 10% = 100ms / 1000ms = overloadLow (100%) Load due to messageSendTimeRequest = 20% = 100ms / 500ms = overloadLow (100%) Load due to expected inbound transfers: 0% because: 3600.0 req/hr * 0.0625 (pTransfer) * 0.0 bytes = 0 bytes/hr expected from current requests, but maxInputBytes/minute = 0 (max observed bytes per minute) * 60 * 1.1 = 0 bytes/hr target Estimated external pSearchFailed (based only on QueryRejections due to load): 1.0 Current estimated requests per hour:763.6995942039521 Current global quota (requests per hour): 3879.304592653721 Highest seen bytes downloaded in one minute:0 Current outgoing request rate 3600.0 Current probability of a request succeeding by routing ? Current probability of an inbound request causing a transfer outwards 50% Current target (best case single node) probability of a request succeeding 0% Sun Dec 18 19:43:37 NZDT 2005 [More details] Connections open (Inbound/Outbound/Limit) 0 (0/0/50) Transfers active (Transmitting/Receiving) 0 (0/0) Data waiting to be transferred None Total amount of data transferred1,811 Bytes Outbound connections legend Inbound connections legend IdleIdle Transmitting data Transmitting data Receiving data Receiving data Receiving and transmitting data Receiving and transmitting data Number of requests (sent/received) 0/0 -- 2005-12-18 19:44:44.281 NZDT * Smoothed local mean traffic (queries per hour): 1.000 * Smoothing half life (lsHalfLifeHours): 1.200 hour. That is, the rate decays completely to a new value after 12.000 hour. * Instantaneous local traffic: 0.000 queries per hour. That is, the last 0 queries arrived in 1134888284.281 second or 315246.746 hour. * Current proportion of requests being accepted: 1.000 * Current advertise probability: 0.050 * Traffic data from 2 nodes (max allowed 100), of which 2 were used. The oldest 5% and the smallest and largest 5% (up to 10% if the table is not full) are not used in computing statistics. * Global mean traffic per node (queries per hour): 1.000 * Global median traffic per node (queries per hour): 1.000 * Standard Deviation of global traffic per node: 0.000 Class Queries per houras of Node fingerprint Used1 2005-12-18 19:39:03.390 NZDT0x0 : Used1 2005-12-18 19:44:44.281 NZDT0x0 : Uptime: 0 days, 0 hours, 4 minutes Current routingTime: 0ms. Pooled threads running jobs: 19 (15.8%) Pooled threads which are idle: 6 Current estimated load for rate limiting: 15.8%. Load due to thread limit = 15.8% Load due to routingTime = 10% = 100ms / 1000ms = overloadLow (100%) Load due to messageSendTimeRequest = 20% = 100ms / 500ms = overloadLow (100%) Load due to expected inbound transfers: 0%
