Re: some question about Debug Board
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | Hi xiangfu: | | i receive a new debug board and the serial console is work. | yesterday i try to use openocd but it is not work. | - -- | | Bus 002 Device 015: ID 0403:6010 Future Technology Devices | International, Ltd FT2232C Dual USB-UART/FIFO IC | | Your debug board is not programed or been cleaned eeprom, the USB ID is | default FTDI ID 0403:6010 | | Unable to find FTDI devices under given vendor/product id: 0x1457/0x5118 | Retrying with default FTDI id. | Used eeprom space: 102 bytes | FTDI write eeprom: 0 | Writing to file: neo1973_debug_board_v2.eeprom | FTDI close: 0 | | Same problem, it's not 0x1457/0x5118 anymore. so flashing fail. | | You could modify the openocd.cfg or openocd-debugv2.cfg file , | ftdi_vid_pid 0x0403 0x6010 make it work without refresh eeprom into | correct USB ID. Good job Tony answered, my experience is with exactly one rev2 debug board that came from Willie with EEPROM set up so it's a much education for me as you Xiangfu :-) - -Andy -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkjMzE4ACgkQOjLpvpq7dMoaogCfcIsCKLHzFPHQDSqUBPSboq3Q rFIAoJMkHDM9DvoRFkdUyCqvX+oMFCao =PQ5g -END PGP SIGNATURE- ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: Free Runner won't turn on
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 ARGH! moin the 2nd my freerunner is back to life .. strange thing .. i just connected to my powerbook (as external pwr-source instead of wall-charger) and inserted battery and it turned on .. does anyone at OM know what's going on there?! overnight i tried some scenarios without any success .. ciao, morlac p.s: Christoph: Entwarnung - ich würde nur verdammt gerne wissen, was da passiert ist. Am 14.09.2008 um 10:59 schrieb Christian Adams: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 moinmoin this night my freerunner got similar symptoms. i wanted to reboot my debian on sd while testing some python-code via 'reboot' on ssh and suddenly little freerunner freezed. i pulled battery and charger out, waited a minute or so and inserted the battery again. on powerbutton-press just a little crackle from speaker and a blink from aux-led occure and that's all. no further sign of life. i also tried to enter NAND/NOR but without success. battery says 4.15V so i think it's not dead. ciao, morlac p.s: Christoph: Wie sieht's bezüglich Garantie aus, wenn der FR defekt ist? Hatte den einzelnen FR bei Dir bestellt, als Du ihn noch für 299,- angeboten hast. Am 13.09.2008 um 09:25 schrieb michael irons: I was updating some packages in 2008 latest image when I thought my freerunner suspended. Probablem is is that it doesn't come back and won't reboot even by holing the power button. I can'teven get it to come up in the NAND/NOR flash boot menu. Any ideas? Battery dead? Tests to run? - -BEGIN CONTACT BLOCK- eMail: [EMAIL PROTECTED] Jabber: [EMAIL PROTECTED] - --END CONTACT BLOCK-- - -BEGIN GEEK CODE BLOCK- Version: 3.1 GCS$/IT;d-;s:;a?;C++(+++);UL;P++(+++); L++(+++);E---;W++;N(+);o?;K?;!w;!O;!M+;!V;PS(+);PE; Y+;PGP++;t+(++);5(+)++;X(+);R*;tv-+;b++(+++);DI++; D++(+++);G(+)++;e;h-()++;r++;y++; - --END GEEK CODE BLOCK-- -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.7 (Darwin) iD8DBQFIzNvkr81gVylJyzERAu0wAJ0edDyqPqK+DV/8lkqf63XwGLMqRQCg3lna f73IPZMdzsWZfn4NxEM05BE= =PELz -END PGP SIGNATURE- ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: Sound quality in calls.
Hi, 2008/9/14 Nicolas Dufresne [EMAIL PROTECTED]: Is the noise worst when put your finger on the audio jack ? Its worse depending on how i hold the phone but never good, just less or more static. The real problem is the volume level thats turned down so low people cant hear me at all. This looks like the famous buzzing noize which is described here as a hardware bug mixed with bad alsa settings. Is this why the mic is turned down so low? http://lists.openmoko.org/pipermail/hardware/2008-August/000415.html Le dimanche 14 septembre 2008 à 01:42 +0200, Daniel Hedblom a écrit : Well, i have tried 2008.7, Qtopia, FSO milestone 2 and 3 and debian. The sound has been described as if i sit in a barrel. Its very low with much interferance and echos. Im beginning to suspect somethings wrong with the actual hardware. //danielh 2008/9/13 Al Johnson openmokomazikeen.demon.co.uk: On Saturday 13 September 2008, Daniel Hedblom wrote: I have tried mucking about with alsa levels to get better sound in various dists for the Freerunner. I havent got good outgoing sound in any distribution, everyone i talk to complains. Is there any way to get decent outgoing sound thats described somewhere a bit in detail? There seems to be so many different answers, im getting a bit confused. You've supplied too few details. Which images from which dates have you tried, and what exactly is wrong with the audio? ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: Sound quality in calls.
I think that would be a good guess, I don't think amplifying the noise would make so much good to the sound quality. By the way, anyone from Openmoko has information about this ? When investigation finishes, will their be a repaire program in place ? I know you prefere working each case individually, could we get the email address we should send our request to ? Thanks, Nicolas Le dimanche 14 septembre 2008 à 12:31 +0200, Daniel Hedblom a écrit : This looks like the famous buzzing noize which is described here as a hardware bug mixed with bad alsa settings. Is this why the mic is turned down so low? ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: Free Runner won't turn on
On Mon, 15 Sep 2008 00:10:41 +0200 umaxx [EMAIL PROTECTED] wrote: On Sun, 14 Sep 2008 17:53:46 +0530 Edgar D' Souza [EMAIL PROTECTED] wrote: On Sun, Sep 14, 2008 at 3:09 PM, Christian Adams [EMAIL PROTECTED] wrote: ARGH! moin the 2nd my freerunner is back to life .. strange thing .. i just connected to my powerbook (as external pwr-source instead of wall-charger) and inserted battery and it turned on .. Heh... I discovered this by accident some time ago, running 2007.2 stock with upgrades... shut down the phone since not using it; an hour later, I tried to power the phone on again, and discovered it wouldn't, just like Michael describes (I got no click/AUX LED blink like you describe). Pretty amazed at how the battery could possibly discharge in one hour with the phone *shut down*, I plugged in the wall charger, and it came on on its own... and when it booted, batt charge was pretty much above 90% - so I still have no idea what that was all about. Have only encountered it twice more; once when running Qtopia, with a near-full batt, and once with Qtopia and the battery was almost drained, so no wonder it wouldn't come on. I observed this once with 2007.2, once with Qtopia. Michael said he's using 2008.08... and you're using Debian... so very low odds of it being rootfs-specific, right? Kernel-related, or some bug with power handling in h/w? Dunno... same experiences here with 2007.x and 2008.x-asu. sometimes i need to remove the battery multiple times before it is working again. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support Same here , my Device wasnt Bricked , that was this issue -- Armin ranjbar , System Administrator ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
