I received my FR this Tuesday. I've upgrade to 2008.09, and almost
everything works. My biggest beef is that the SD card is not even detected
by the system. Here is the relevant dmesg output:
[2.195000] SD power - 3200mV
[2.235000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255
(req: 0kHz). Bus width=0
[2.235000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255
(req: 195kHz). Bus width=0
[2.235000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255
(req: 195kHz). Bus width=0
[2.24] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255
(req: 195kHz). Bus width=0
[2.24] glamo-mci glamo-mci.0: Error after cmd: 0x120
[2.24] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[2.245000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[2.245000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[2.245000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[2.25] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[2.25] mmc_set_power(power_mode=0, vdd=0
In reading other mailing lists, the 6 Error after cmd are normal and just
part of the startup. However, after that, glamo should detect my SD card.
I am using the 512mb card that came with my phone. The card works in 2 other
devices (one is a Samsung phone, the other is my PC).
here is cat /proc/cmdline :
rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0
loglevel=4 regular_boot
mtdparts=physmap-flash:-(nor);neo1973-nand:0x0004(u-boot),0x0004(u-boot_env),0x0080(kernel),0x000a(splash),0x0004(factory),0x0f6a(rootfs)
U-Boot is 1.3.2-moko12
I have an 8gb card on the way from Newegg, but it will be useless if I can't
get the stock card to work. I've positioned and repositioned the card
several times, it's never detected.
Thanks,
Luke
___
support mailing list
support@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/support
