Re: no wifi on freerunner fso
the search for ar6000 returned nothing, i'm not sure if its supposed to be a module in the fso release or not though, i checked the modules directory and there were modules for other stuff. Perhaps i should put shr on my freerunner to check Joachim Ott-2 wrote: This is how it's looking over here with a working wifi. You still haven't told, if the wlan driver is builtin or a module. [21474742.365000] s3c2440-sdi s3c2440-sdi: powered down. [21474742.365000] s3c2440-sdi s3c2440-sdi: powered down. [21474805.675000] s3c2440-sdi s3c2440-sdi: host detect has no irq available [21474805.755000] s3c2440-sdi s3c2440-sdi: powered down. [21474805.755000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). [21474805.775000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [21474805.785000] s3c2440-sdi s3c2440-sdi: initialisation done. [21474805.815000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [21474805.825000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [21474805.84] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [21474805.855000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [21474805.885000] mmc1: queuing CIS tuple 0x01 length 3 [21474805.91] mmc1: queuing CIS tuple 0x1a length 5 [21474805.96] mmc1: queuing CIS tuple 0x1b length 8 [21474805.96] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz). [21474805.975000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz). [21474805.985000] mmc1: queuing CIS tuple 0x80 length 1 [21474805.985000] mmc1: queuing CIS tuple 0x81 length 1 [21474806.005000] mmc1: queuing CIS tuple 0x82 length 1 [21474806.005000] mmc1: new SDIO card at address 0001 [21474807.115000] eth0 (sdio_ar6000): not using net_device_ops yet [21474807.19] AR6000 Reg Code = 0x4060 [21474817.63] eth0: no IPv6 routers present [ 34.79] AR6000 disconnected [ 34.85] AR6000 connected event on freq 2452 with bssid 00:1c:4a:d1:5a:af listenInterval=100, beaconInterval = 100, beaconIeLen = 26 assocReqLen=57 assocRespLen =22 [ 4578.285000] AR6000 disconnected from 00:1c:4a:d1:5a:af ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support -- View this message in context: http://n2.nabble.com/no-wifi-on-freerunner-fso-tp3212485p3730239.html Sent from the Openmoko Support mailing list archive at Nabble.com. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: no wifi on freerunner fso
i put shr unstable on my freerunner and it does have the ar6000 module in the modules directory tried everything so far loaded the ar6000 modules and here is the results of dmesg | grep -i -e ar6000 -e eth0 -e s3c2440-sdi -e mmc1 [21474568.92] s3c2440-sdi s3c2440-sdi: host detect has no irq available [21474568.985000] s3c2440-sdi s3c2440-sdi: Regulator for SD_3V3 unavilable [21474569.215000] s3c2440-sdi s3c2440-sdi: powered down. [21474569.22] s3c2440-sdi s3c2440-sdi: initialisation done. [21474569.25] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). [21474569.265000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [21474569.27] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [21474569.285000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [21474569.505000] s3c2440-sdi s3c2440-sdi: powered down. [ 1041.72] s3c2440-sdi s3c2440-sdi: powered down. [ 1043.67] s3c2440-sdi s3c2440-sdi: host detect has no irq available [ 1043.68] s3c2440-sdi s3c2440-sdi: Regulator for SD_3V3 unavilable [ 1043.71] s3c2440-sdi s3c2440-sdi: powered down. [ 1043.71] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). [ 1043.72] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 1043.73] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 1043.735000] s3c2440-sdi s3c2440-sdi: initialisation done. [ 1043.745000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 1043.98] s3c2440-sdi s3c2440-sdi: powered down. Joachim Ott-2 wrote: 2009/9/28 edgezorz edge.f...@gmail.com: the search for ar6000 returned nothing, i'm not sure if its supposed to be a module in the fso release or not though, i checked the modules directory and there were modules for other stuff. Perhaps i should put shr on my freerunner to check I have it here: $ find /lib/modules -name ar6000.ko /lib/modules/2.6.29-rc3/kernel/drivers/ar6000/ar6000.ko One last try to check if it is built into the kernel: $ strings -a /dev/mtd3 | grep AR6000 (or wherever your kernel is, when your system is on SD-card) This should show about 10 lines. If not, maybe someone has forgotten to include the driver. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support -- View this message in context: http://n2.nabble.com/no-wifi-on-freerunner-fso-tp3212485p3730815.html Sent from the Openmoko Support mailing list archive at Nabble.com. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: no wifi on freerunner fso
i tried the following: mdbus -s org.freesmartphone.odeviced /org/freesmartphone/Device /PowerControl/WiFi org.freesmartphone.Device.PowerControl.SetPower 1 mdbus -s org.freesmartphone.ousaged /org/freesmartphone/Usage o rg.freesmartphone.Usage.SetResourcePolicy WiFi enabled mdbus -s org.freesmartphone.ousaged /org/freesmartphone/Usage o rg.freesmartphone.Usage.GetResourceState WiFi True mdbus -s org.freesmartphone.ousaged /org/freesmartphone/Usage o rg.freesmartphone.Usage.RequestResource WiFi ifup eth0 ifup: interface eth0 already configured ifconfig -a loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:208 (208.0 B) TX bytes:208 (208.0 B) pan0 Link encap:Ethernet HWaddr 16:67:C3:34:30:2C BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) usb0 Link encap:Ethernet HWaddr 5E:C0:6E:45:1E:46 inet addr:192.168.0.202 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::5cc0:6eff:fe45:1e46/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3617 errors:0 dropped:0 overruns:0 frame:0 TX packets:2715 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:309641 (302.3 KiB) TX bytes:349454 (341.2 KiB) eth0 is still a no show not sure if lsmod is relevent but lsmod Module Size Used by bnep 12800 2 sco10444 2 snd_soc_neo1973_gta02_wm8753 8552 0 snd_soc_s3c24xx_i2s 3896 1 snd_soc_neo1973_gta02_wm8753 snd_soc_s3c24xx 4424 1 snd_soc_neo1973_gta02_wm8753 snd_soc_wm8753 33384 1 snd_soc_neo1973_gta02_wm8753 snd_soc_core 34360 3 snd_soc_neo1973_gta02_wm8753,snd_soc_s3c24xx,snd_soc_wm8753 snd_pcm76364 2 snd_soc_s3c24xx,snd_soc_core snd_timer 21052 1 snd_pcm snd_page_alloc 6504 1 snd_pcm snd50788 5 snd_soc_neo1973_gta02_wm8753,snd_soc_wm8753,snd_soc_core,snd_pcm,snd_timer rfcomm 37320 4 ipv6 265884 14 hidp 14664 0 l2cap 21456 17 bnep,rfcomm,hidp g_ether39604 0 btusb 11952 3 bluetooth 60408 14 bnep,sco,rfcomm,hidp,l2cap,btusb ohci_hcd 28564 0 s3c2410_wdt 8984 0 not sure what the problem is. anything else i can try? Erik Andresen wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Have you powered it up? Try to request it with dbus with a command like mdbus -s org.freesmartphone.odeviced /org/freesmartphone/Device/PowerControl/WiFi org.freesmartphone.Device.PowerControl.SetPower 1 greetings, Erik -- View this message in context: http://n2.nabble.com/no-wifi-on-freerunner-fso-tp3212485p3719105.html Sent from the Openmoko Support mailing list archive at Nabble.com. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: no wifi on freerunner fso
i have the same problem with my free runner, gps and blue tooth appear to work but no wifi, eth0 doesn't show up and binding doesn't make it show. anyone know what i an do to get it working or is my wireless doa? flecktor wrote: hi, i got fso installed on the free runner and i cant get the wifi to work. same result for hackable:1. can anyone tell me how to check the wifi? (other then connect to another network or open network). i do iwconfig and the result is lo no wireless extensions. usb0 no wireless extensions. pan0 no wireless extensions. thanks -- View this message in context: http://n2.nabble.com/no-wifi-on-freerunner-fso-tp3212485p3715886.html Sent from the Openmoko Support mailing list archive at Nabble.com. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support