Re: [pfSense Support] Vlan problems
Thank you! Amorim, Nuno Alexandre (ext) wrote: In the trunk port configure the native vlan to vlan 1. -Original Message- From: tele [mailto:[EMAIL PROTECTED] Sent: quinta-feira, 13 de Abril de 2006 17:03 To: support@pfsense.com Subject: [pfSense Support] Vlan problems Hi, I running Pfsense-Beta2 and this is my setup: WAN83.214.128.169/26 LAN 192.168.100.1/24 SERVICE 83.214.162.0/24 SERVICE it's vlan0 with vid 162 i've activated Advanced Outbound NAT with the following rules: Interface Source Destination WAN 192.168.100.0/24* SERVICE 192.168.100.0/2483.214.162.0/24 the firewall rules are set to permit ALL in all interfaces ok now i have the LAN port connected to a cisco catalyst with a trunk configured in that port and some other port tagged. so if i connect a pc to the port tagged with default 1 vlan i can exit to internet and ping any interface. if i connect a pc to the port tagged with the vlan 162 and configure the network for subnet 83.214.162.0/24 with gw 83.214.162.1 i can ping any interface of the fw but i can't ping out! i don't know where is the problem i think that the catalyst config it's ok. maybe i missing something in the pfsense configuration. thank you for any help :tele - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] Page fault managing CARP
hi, I'm using CARP and when creating virtual ip in my master fw sometimes not always cause a Page fault while in kernel mode and the system reboot in 15sec after that the filesystem was corrupted, autorepaired during boot but the system lost pfsense XML configuration. Loading configuration... XML error: no pfsense object found! Warning: Invalid argument supplied for foreach() in /etc/inc/util.inc on line 31 i'm using Pfsense BETA-2. :tele - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Page fault managing CARP
Yes i have upgraded but the problem persist managing virtuals ip sometimes fw(master) or fw(backup) page faulting and reboot. when i can i make a shot of the fault. for lucky now don't erase pfSense configuration after reboot. i really want replace our m0n0wall production firewalls with pfSense ;) :tele Holger Bauer wrote: Beta2 is pretty old. Upgrade to http://pfsense.com/~sullrich/RELENG_1_SNAPSHOT_04-12-2006/ . Holger -Original Message- From: tele [mailto:[EMAIL PROTECTED] Sent: Friday, April 14, 2006 12:29 PM To: support@pfsense.com Subject: [pfSense Support] Page fault managing CARP hi, I'm using CARP and when creating virtual ip in my master fw sometimes not always cause a Page fault while in kernel mode and the system reboot in 15sec after that the filesystem was corrupted, autorepaired during boot but the system lost pfsense XML configuration. Loading configuration... XML error: no pfsense object found! Warning: Invalid argument supplied for foreach() in /etc/inc/util.inc on line 31 i'm using Pfsense BETA-2. :tele - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Virus checked by G DATA AntiVirusKit - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] Vlan problems
Hi, I running Pfsense-Beta2 and this is my setup: WAN83.214.128.169/26 LAN 192.168.100.1/24 SERVICE 83.214.162.0/24 SERVICE it's vlan0 with vid 162 i've activated Advanced Outbound NAT with the following rules: Interface Source Destination WAN 192.168.100.0/24* SERVICE 192.168.100.0/2483.214.162.0/24 the firewall rules are set to permit ALL in all interfaces ok now i have the LAN port connected to a cisco catalyst with a trunk configured in that port and some other port tagged. so if i connect a pc to the port tagged with default 1 vlan i can exit to internet and ping any interface. if i connect a pc to the port tagged with the vlan 162 and configure the network for subnet 83.214.162.0/24 with gw 83.214.162.1 i can ping any interface of the fw but i can't ping out! i don't know where is the problem i think that the catalyst config it's ok. maybe i missing something in the pfsense configuration. thank you for any help :tele - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]