Re: [Elphel-support] 14Mpix sensor update
Hi, https://community.elphel.com/files/393/20180322/ - 5MPx works - there's serial number added to http://192.168.0.9:2323/meta (2323 = port 0 ... 2326 = port 3) > "00:0E:64:10:F2:7F" - see instructions in readme_14MPx.md for 14MPx in the archive. Try with SD card. - I'm working on exposure - there are incorrect fps readings. Let me know if you have any problems. Regards, Oleg On Wed, Mar 21, 2018 at 7:41 PM, Richard Rigby wrote: > Awesome, thank you. > > > Kind regards, > > *Richard Rigby* > Software Developer > > > www.redzone.com > > Ph: +64 9 479 9901 > > Fax: +64 9 479 9904 > > > 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand > > On 22 March 2018 at 14:40, Oleg wrote: > >> Ok. Will upload tomorrow. Need to test a little if it still works for >> 5MPx. >> Oleg >> > > > ___ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
[Elphel-support] NC353L ip address
To whom It may concern Good day, Its William Smith from Professional Mobile Mapping we have a NC353L, we changed the IP Address of the camera and forgot what the IP was is there a way to change the IP or reset the camera. Kind Regards William ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] NC353L ip address
Hello William, Do you have 10369 (interface) board in you camera? If yes, you can use serial console and see the IP. If you know most of the IP, such as 192.168.0.??? you may try (with the camera turned on and had time to boot): ping -b 192.168.0.0 You may also try using arp ( https://wiki.elphel.com/wiki/Network_configuration#ipsetd ), "Ethernet address" is equal to camera serial number available on the camera label. It is also possible to perform network boot and/or reflash the camera firmware. Andrey On Thu, 22 Mar 2018 23:48:12 -0700 William Smithwrote To whom It may concern Good day, Its William Smith from Professional Mobile Mapping we have a NC353L, we changed the IP Address of the camera and forgot what the IP was is there a way to change the IP or reset the camera. Kind Regards William ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] NC353L ip address
Seems like Elphel had a script / program that located cameras on the network on their software package. However, I have found that using http://angryip.org/ to be very fast and effective way to find the camera(s) and works with windows / mac / linux. Of course it is faster if you have a guess… For example: if you knew it was 192.168.1. then it literally would take you 2 seconds (it would only have to scan 255 IPs). If you only knew 192.168. then it would take a minute or two to find. Shane Sanford Concurrent Solutions, LLC From: Support-list On Behalf Of William Smith Sent: Friday, March 23, 2018 1:48 AM To: support-list@support.elphel.com Subject: [Elphel-support] NC353L ip address To whom It may concern Good day, Its William Smith from Professional Mobile Mapping we have a NC353L, we changed the IP Address of the camera and forgot what the IP was is there a way to change the IP or reset the camera. Kind Regards William ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com