Author: jpaetzel
Date: Tue May 1 17:39:20 2018
New Revision: 333146
URL: https://svnweb.freebsd.org/changeset/base/333146
Log:
Add ability to perform a firmware reset during driver initialization.
Required by Lancer Gen 5 hardware.
Submitted by: Ram Kishore Vegesna <ram.vege...@broadcom.com>
Obtained from: Broadcom
Modified:
head/sys/dev/oce/oce_if.h
head/sys/dev/oce/oce_mbox.c
Modified: head/sys/dev/oce/oce_if.h
==============================================================================
--- head/sys/dev/oce/oce_if.h Tue May 1 17:32:43 2018 (r333145)
+++ head/sys/dev/oce/oce_if.h Tue May 1 17:39:20 2018 (r333146)
@@ -1016,6 +1016,7 @@ void oce_free_lro(POCE_SOFTC sc);
* Mailbox functions
************************************************************/
int oce_fw_clean(POCE_SOFTC sc);
+int oce_wait_ready(POCE_SOFTC sc);
int oce_reset_fun(POCE_SOFTC sc);
int oce_mbox_init(POCE_SOFTC sc);
int oce_mbox_dispatch(POCE_SOFTC sc, uint32_t tmo_sec);
Modified: head/sys/dev/oce/oce_mbox.c
==============================================================================
--- head/sys/dev/oce/oce_mbox.c Tue May 1 17:32:43 2018 (r333145)
+++ head/sys/dev/oce/oce_mbox.c Tue May 1 17:39:20 2018 (r333146)
@@ -43,6 +43,34 @@
#include "oce_if.h"
extern uint32_t sfp_vpd_dump_buffer[TRANSCEIVER_DATA_NUM_ELE];
+int
+oce_wait_ready(POCE_SOFTC sc)
+{
+#define SLIPORT_READY_TIMEOUT 30000
+ uint32_t sliport_status, i;
+
+ if (!IS_XE201(sc))
+ return (-1);
+
+ for (i = 0; i < SLIPORT_READY_TIMEOUT; i++) {
+ sliport_status = OCE_READ_REG32(sc, db, SLIPORT_STATUS_OFFSET);
+ if (sliport_status & SLIPORT_STATUS_RDY_MASK)
+ return 0;
+
+ if (sliport_status & SLIPORT_STATUS_ERR_MASK &&
+ !(sliport_status & SLIPORT_STATUS_RN_MASK)) {
+ device_printf(sc->dev, "Error detected in the card\n");
+ return EIO;
+ }
+
+ DELAY(1000);
+ }
+
+ device_printf(sc->dev, "Firmware wait timed out\n");
+
+ return (-1);
+}
+
/**
* @brief Reset (firmware) common function
* @param sc software handle to the device
@@ -56,26 +84,36 @@ oce_reset_fun(POCE_SOFTC sc)
struct ioctl_common_function_reset *fwcmd;
int rc = 0;
- if (sc->flags & OCE_FLAGS_FUNCRESET_RQD) {
- mb = OCE_DMAPTR(&sc->bsmbx, struct oce_bmbx);
- mbx = &mb->mbx;
- bzero(mbx, sizeof(struct oce_mbx));
+ if (IS_XE201(sc)) {
+ OCE_WRITE_REG32(sc, db, SLIPORT_CONTROL_OFFSET,
+ SLI_PORT_CONTROL_IP_MASK);
- fwcmd = (struct ioctl_common_function_reset *)&mbx->payload;
- mbx_common_req_hdr_init(&fwcmd->hdr, 0, 0,
- MBX_SUBSYSTEM_COMMON,
- OPCODE_COMMON_FUNCTION_RESET,
- 10, /* MBX_TIMEOUT_SEC */
- sizeof(struct
- ioctl_common_function_reset),
- OCE_MBX_VER_V0);
+ rc = oce_wait_ready(sc);
+ if (rc) {
+ device_printf(sc->dev, "Firmware reset Failed\n");
+ }
- mbx->u0.s.embedded = 1;
- mbx->payload_length =
- sizeof(struct ioctl_common_function_reset);
-
- rc = oce_mbox_dispatch(sc, 2);
+ return rc;
}
+
+ mb = OCE_DMAPTR(&sc->bsmbx, struct oce_bmbx);
+ mbx = &mb->mbx;
+ bzero(mbx, sizeof(struct oce_mbx));
+
+ fwcmd = (struct ioctl_common_function_reset *)&mbx->payload;
+ mbx_common_req_hdr_init(&fwcmd->hdr, 0, 0,
+ MBX_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_FUNCTION_RESET,
+ 10, /* MBX_TIMEOUT_SEC */
+ sizeof(struct
+ ioctl_common_function_reset),
+ OCE_MBX_VER_V0);
+
+ mbx->u0.s.embedded = 1;
+ mbx->payload_length =
+ sizeof(struct ioctl_common_function_reset);
+
+ rc = oce_mbox_dispatch(sc, 2);
return rc;
}
_______________________________________________
svn-src-head@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
