Re: [systemd-devel] question about system reboot and shutdown
On 09.08.2017 11:28, Tilman Baumann wrote: > DL;DR > UPS shutdowns are tricky. Clean file-systems are not the only concern. > But if you can make assumptions about your storage backend you might be > able to cut corners safely. > > In my experience, the only place where you can hook in a non racy way is > in the kernel. > > https://unix.stackexchange.com/questions/122557/how-does-the-system-shutdown-of-a-linux-kernel-work-internally Apologies, I copy and pasted the wrong link https://stackoverflow.com/questions/5938325/how-do-i-detect-reboot-shutdown-from-a-linux-driver The magic is here IIRC https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/kernel/reboot.c ___ systemd-devel mailing list systemd-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/systemd-devel
Re: [systemd-devel] question about system reboot and shutdown
DL;DR UPS shutdowns are tricky. Clean file-systems are not the only concern. But if you can make assumptions about your storage backend you might be able to cut corners safely. In my experience, the only place where you can hook in a non racy way is in the kernel. https://unix.stackexchange.com/questions/122557/how-does-the-system-shutdown-of-a-linux-kernel-work-internally Because this is the hook which a lot of RAID systems and storage back-ends use to signal a clean poweroff. If you just halt your system very late in shutdown in userspace and switch the lights off, the kernel will never run this code. The result is that for example RAID unclean flags are still set. UPS kernel drivers generally solve this problem by setting a 'powerfail' flag before they initiate a shutdown. The driver is hooked in the shutdown notifier and initiates the poweroff through the UPS. Another race condition is, that during the shutdown, the power could have come back. THE UPS needs to recognize that and still power off the system to ensure a reboot and then switch it back on. But I think in your case, using a time based approach is quite valid. Late in shutdown, set the powerfail flag in the UPS and set a poweroff timer. While that timer is ticking in the UPS, your system will continue shutting down safely and halt. And when the timer ran out the UPS will switch the lights off. That is by nature racy. But in a well defined system I suppose the risk is manageable. Mind you, my exposure tho this stuff is 10 years old or so. A lot might have happened since then. Back then I was fighting with a APC UPS which did not support timer based poweroff and in combination with a 3ware RAID controller lead to degraded volumes after powerfail. The shutdown was done in userspace and the UPS did not know timer based shutdowns. Hence the kernel hook never ran. BTW. if you don't want to reinvent the wheel. networkupstools (NUT) was back then the only really sensible software stack that did in practice most things right. As I said. My experience is 10 years dated. And I don't know if NUT works well with systemd. And of course a network based system is overkill. But perhaps you can have a look at it for some 'best practices' On 09.08.2017 11:02, Marek Floriańczyk wrote: > Dnia środa, 9 sierpnia 2017 10:29:37 CEST Lennart Poettering pisze: >> On Di, 08.08.17 16:03, Marek Floriańczyk (marek.florianc...@gmail.com) wrote: >>> Hi all, >>> >>> I have a small device MicroUPS which helps me to shutdown my system on >>> embedded devices, it is controlled by script /etc/init.d/microups and in >>> this script I need to know whether system is going down for reboot or for >>> halt, because in case of halt I need to send small data over RS232 to >>> MicroUPS device to cut the power off. >> >> Note that this is necessarily racy: you can't really know how long the >> system will actually take to shut down, hence if you trigger your >> hardware for shutdown at an early phase of the shutdown process you >> now start racing the remaining shutdown phase against the hardware turning >> off power... >> >> If you want to fix this properly, and remove this race entirely the >> only fully correct way out I see is to use an initrd for booting, and >> doing the RS232 thing from that. Note that if you use a properly >> prepared initrd, systemd will actually transition back to it at >> shutdown, and while doing so it will permit unmounting the root file >> system properly at shutdown. And only if you start the RS232 thing >> after the point where the root fs is unmounted you can fully remove >> the race in the generic case, since only at that point everything is >> fully synced to disk, all complex storage is disassembled and so on. >> >> Now, adding this to the initrd is not the easiest thing in the world, >> and in particular in embedded devices avoiding an initrd might be a >> good thing. As long as you have no complex storage (i.e. no DM, no >> LVM, no LUKS, no RAID, no iscsi, yaddayadda) you can instead cut a >> corner and just drop in a shutdown script to ___ systemd-devel mailing list systemd-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/systemd-devel
Re: [systemd-devel] sd-bus example code for SetLinkDNS()
Little follow-up question. What would you say is best practice for a vpn client? - Add commandline option --update-systemd-resolved or so - Autodetect existence of the interface and just do it? (How?) - Always try to do the update but silently ignore if it fails and fall back to updating resolve.conf instead? I was going with the commandline option. But I'm beginning to hate it. Do the right thing if you know what's right rings better with me. I will have to introduce a option for domain filter (and search domain) anyway, that stuff will never work out of the box. The VPN protocol is one of those nasty ppp over ssl jobs. And the only fields passed down to the client are the nameservers. Cheers Tilman On 21.07.2017 14:35, Lennart Poettering wrote: > On Wed, 19.07.17 11:20, Tilman Baumann (til...@baumann.name) wrote: > >> Hi folks, >> >> I'm trying to teach a vpn software (openfortivpn) how to properly set up >> DNS in a systemd-resolve environment. >> >> I'm trying to set up a equivalent to this in C. >> busctl call org.freedesktop.resolve1 /org/freedesktop/resolve1 >> org.freedesktop.resolve1.Manager SetLinkDNS 'ia(iay)' 16 2 2 4 10 10 10 >> 10 2 4 10 10 10 11 >> [https://gist.github.com/tbaumann/d484efb2e27613654a52dbe11cfe53b8] >> >> I came up with this quick proof of concept code based on the example >> code in the sd-bus docu. >> Of course it segfaults. No surprise, I have done nothing to hint at the >> length of the inner byte array. (ay) >> >> I was unable to find any example code that would give me a hint on how >> to pass such more complex data structures into sd_bus_call_method() >> >> int SetLinkDNSv4(sd_bus *bus, int if_index, struct in_addr ns1, struct >> in_addr ns2) { >> sd_bus_error error = SD_BUS_ERROR_NULL; >> sd_bus_message *m = NULL; >> int r; >> struct dns_address { >> int sin_family; >> struct in_addr ip_addr; >> }; >> struct dns_address addresses[2]; >> >> >> addresses[0].sin_family = AF_INET; >> addresses[0].ip_addr = ns1; >> addresses[1].sin_family = AF_INET; >> addresses[1].ip_addr = ns2; >> >> r = sd_bus_call_method(bus, >> "org.freedesktop.resolve1", /* >> service to contact */ >> "/org/freedesktop/resolve1", /* object >> path */ >> "org.freedesktop.resolve1.Manager", /* >> interface name */ >> "SetLinkDNS", /* method >> name */ >> , /* object >> to return error in */ >> , /* return >> message on success */ >> "ia(iay)",/* input >> signature */ >> if_index, >> 2,/* Array >> size */ >> addresses); >> } >> >> [Full code: >> https://gist.github.com/tbaumann/0f466c984c858767c966458d53483697] >> >> My guess is that I can have it easier if I somehow use >> sd_bus_message_append() to assemble the message. But I don't see a clear >> path either. > > You have to do something like this: > > sd_bus_message_new_method(..., ); > sd_bus_message_append(m, "i", ifindex); > sd_bus_message_open_container(m, 'a', '(iay)'); > for (i = 0; i < n_addresses; i++) { > sd_bus_message_open_container(m, '(', "iay")); > sd_bus_message_append(m, "i", addresses[i].sin_family); > sd_bus_message_append_array(m, 'y', [i].ip_addr, > sizeof(addresses[i].ip_addr)); > sd_bus_message_close_container(m); > } > sd_bus_message_close_container(m); > sd_bus_message_send(..., m); > sd_bus_message_unref(m); > > (not tested, just written down from the top of my head, and of course, > don't forget to add proper error checking) > > Lennart > ___ systemd-devel mailing list systemd-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/systemd-devel
Re: [systemd-devel] sd-bus example code for SetLinkDNS()
On 21.07.2017 14:44, Tilman Baumann wrote: > On 21.07.2017 14:35, Lennart Poettering wrote: >> On Wed, 19.07.17 11:20, Tilman Baumann (til...@baumann.name) wrote: >> > >> My guess is that I can have it easier if I somehow use >>> sd_bus_message_append() to assemble the message. But I don't see a clear >>> path either. >> >> You have to do something like this: >> >> sd_bus_message_new_method(..., ); >> sd_bus_message_append(m, "i", ifindex); >> sd_bus_message_open_container(m, 'a', '(iay)'); >> for (i = 0; i < n_addresses; i++) { >> sd_bus_message_open_container(m, '(', "iay")); >> sd_bus_message_append(m, "i", addresses[i].sin_family); >> sd_bus_message_append_array(m, 'y', [i].ip_addr, >> sizeof(addresses[i].ip_addr)); >> sd_bus_message_close_container(m); >> } >> sd_bus_message_close_container(m); >> sd_bus_message_send(..., m); >> sd_bus_message_unref(m); And here the working solution for the permanent record. r = sd_bus_message_new_method_call( bus, , "org.freedesktop.resolve1", "/org/freedesktop/resolve1", "org.freedesktop.resolve1.Manager", "SetLinkDNS"); r = sd_bus_message_append(m, "i", if_index); r = sd_bus_message_open_container(m, 'a', "(iay)"); for (int i = 0; i < addresses_size; i++) { fprintf(stderr, "server %d\n", i); r = sd_bus_message_open_container(m, 'r', "iay"); r = sd_bus_message_append(m, "i", addresses[i].sin_family); r = sd_bus_message_append_array(m, 'y', [i].ip_addr, sizeof(addresses[i].ip_addr)); r = sd_bus_message_close_container(m); } r = sd_bus_message_close_container(m); r = sd_bus_call(bus, m, 0, , ); ___ systemd-devel mailing list systemd-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/systemd-devel
Re: [systemd-devel] sd-bus example code for SetLinkDNS()
On 21.07.2017 14:35, Lennart Poettering wrote: > On Wed, 19.07.17 11:20, Tilman Baumann (til...@baumann.name) wrote: > >> My guess is that I can have it easier if I somehow use >> sd_bus_message_append() to assemble the message. But I don't see a clear >> path either. > > You have to do something like this: > > sd_bus_message_new_method(..., ); > sd_bus_message_append(m, "i", ifindex); > sd_bus_message_open_container(m, 'a', '(iay)'); > for (i = 0; i < n_addresses; i++) { > sd_bus_message_open_container(m, '(', "iay")); > sd_bus_message_append(m, "i", addresses[i].sin_family); > sd_bus_message_append_array(m, 'y', [i].ip_addr, > sizeof(addresses[i].ip_addr)); > sd_bus_message_close_container(m); > } > sd_bus_message_close_container(m); > sd_bus_message_send(..., m); > sd_bus_message_unref(m); > > (not tested, just written down from the top of my head, and of course, > don't forget to add proper error checking) Phantastic, thanks Lennart ___ systemd-devel mailing list systemd-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/systemd-devel
Re: [systemd-devel] sd-bus example code for SetLinkDNS()
Any hint? I would be happy to just see some similar code that deals with arrays of complex structures. If I see a example that is similar, I'm sure I can learn from it. So if anybody knows of a code example that does that... Thanks On 19.07.2017 11:20, Tilman Baumann wrote: > Hi folks, > > I'm trying to teach a vpn software (openfortivpn) how to properly set up > DNS in a systemd-resolve environment. > > I'm trying to set up a equivalent to this in C. > busctl call org.freedesktop.resolve1 /org/freedesktop/resolve1 > org.freedesktop.resolve1.Manager SetLinkDNS 'ia(iay)' 16 2 2 4 10 10 10 > 10 2 4 10 10 10 11 > [https://gist.github.com/tbaumann/d484efb2e27613654a52dbe11cfe53b8] > > I came up with this quick proof of concept code based on the example > code in the sd-bus docu. > Of course it segfaults. No surprise, I have done nothing to hint at the > length of the inner byte array. (ay) > > I was unable to find any example code that would give me a hint on how > to pass such more complex data structures into sd_bus_call_method() > > int SetLinkDNSv4(sd_bus *bus, int if_index, struct in_addr ns1, struct > in_addr ns2) { > sd_bus_error error = SD_BUS_ERROR_NULL; > sd_bus_message *m = NULL; > int r; > struct dns_address { > int sin_family; > struct in_addr ip_addr; > }; > struct dns_address addresses[2]; > > > addresses[0].sin_family = AF_INET; > addresses[0].ip_addr = ns1; > addresses[1].sin_family = AF_INET; > addresses[1].ip_addr = ns2; > > r = sd_bus_call_method(bus, > "org.freedesktop.resolve1", /* > service to contact */ > "/org/freedesktop/resolve1", /* object > path */ > "org.freedesktop.resolve1.Manager", /* > interface name */ > "SetLinkDNS", /* method > name */ > , /* object > to return error in */ > , /* return > message on success */ > "ia(iay)",/* input > signature */ > if_index, > 2,/* Array > size */ > addresses); > } > > [Full code: > https://gist.github.com/tbaumann/0f466c984c858767c966458d53483697] > > My guess is that I can have it easier if I somehow use > sd_bus_message_append() to assemble the message. But I don't see a clear > path either. > > Also, the length of the array can be one or two. So that bit is variable > too. > > Thanks for any hints > Tilman Baumann > ___ > systemd-devel mailing list > systemd-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/systemd-devel > ___ systemd-devel mailing list systemd-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/systemd-devel
[systemd-devel] sd-bus example code for SetLinkDNS()
Hi folks, I'm trying to teach a vpn software (openfortivpn) how to properly set up DNS in a systemd-resolve environment. I'm trying to set up a equivalent to this in C. busctl call org.freedesktop.resolve1 /org/freedesktop/resolve1 org.freedesktop.resolve1.Manager SetLinkDNS 'ia(iay)' 16 2 2 4 10 10 10 10 2 4 10 10 10 11 [https://gist.github.com/tbaumann/d484efb2e27613654a52dbe11cfe53b8] I came up with this quick proof of concept code based on the example code in the sd-bus docu. Of course it segfaults. No surprise, I have done nothing to hint at the length of the inner byte array. (ay) I was unable to find any example code that would give me a hint on how to pass such more complex data structures into sd_bus_call_method() int SetLinkDNSv4(sd_bus *bus, int if_index, struct in_addr ns1, struct in_addr ns2) { sd_bus_error error = SD_BUS_ERROR_NULL; sd_bus_message *m = NULL; int r; struct dns_address { int sin_family; struct in_addr ip_addr; }; struct dns_address addresses[2]; addresses[0].sin_family = AF_INET; addresses[0].ip_addr = ns1; addresses[1].sin_family = AF_INET; addresses[1].ip_addr = ns2; r = sd_bus_call_method(bus, "org.freedesktop.resolve1", /* service to contact */ "/org/freedesktop/resolve1", /* object path */ "org.freedesktop.resolve1.Manager", /* interface name */ "SetLinkDNS", /* method name */ , /* object to return error in */ , /* return message on success */ "ia(iay)",/* input signature */ if_index, 2,/* Array size */ addresses); } [Full code: https://gist.github.com/tbaumann/0f466c984c858767c966458d53483697] My guess is that I can have it easier if I somehow use sd_bus_message_append() to assemble the message. But I don't see a clear path either. Also, the length of the array can be one or two. So that bit is variable too. Thanks for any hints Tilman Baumann ___ systemd-devel mailing list systemd-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/systemd-devel