Re: [systemd-devel] Auto-start of a Service in systemd

[Kai Krakow]

Am Wed, 5 Oct 2016 18:00:41 +0530
schrieb "Raghavendra. H. R" :

> Andrei,
> 
> Your doubt is absolutely correct. Default target of the system as
> nothing to do with auto start of services.
> 
> I checked both graphical.target & multi-user.target, surprisingly I
> don't see any big difference in these. Both of the files are almost
> same except multi-user.target have dependency *After=* with
> *rescue.service & rescue.target* which is restricting
> multi-user.target from starting.
> 
> However graphical.target don't depend on rescue services, so it is
> active & started. And by making graphical.target as dependency in my
> unit file solved my problem.
> 
> Hopefully if I remove the rescue services dependency from
> multi-user.target and add it as dependency then my service should
> come up without failures.

"After=" does not have such an impact. It won't block a service from
starting if the services in "After=" aren't started. It's just an
ordering dependency. If the dependents aren't enabled they are just
ignored. Instead, "Requires=" and "Wants=" give stronger dependencies.

You can check the status of multi-user.target:

$ systemctl status multi-user.target
● multi-user.target - Multi-User System
   Loaded: loaded (/usr/lib/systemd/system/multi-user.target; static; vendor 
preset: disabled)
   Active: active since Mo 2016-10-03 16:44:14 CEST; 3 days ago
 Docs: man:systemd.special(7)

Okt 03 16:44:14 jupiter.sol.local systemd[1]: Reached target Multi-User System.

$ systemctl get-default
graphical.target

As you see, multi-user.target has been pulled in for me. You can check
the order of targets started with:

$ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @5.383s
└─multi-user.target @5.383s
  └─machines.target @5.383s
└─systemd-nspawn@gentoo\x2delasticsearch\x2dbase.service @2.219s +3.164s
  └─network.target @2.204s
└─systemd-networkd.service @2.031s +172ms
  └─dbus.service @2.005s
└─basic.target @1.920s
  └─sockets.target @1.920s
└─docker.socket @1.896s +24ms
  └─sysinit.target @1.889s
└─systemd-timesyncd.service @1.649s +239ms
  └─systemd-tmpfiles-setup.service @1.576s +66ms
└─local-fs.target @1.575s
  └─run-user-500.mount @5.403s
└─local-fs-pre.target @565ms
  └─systemd-tmpfiles-setup-dev.service @383ms +179ms
└─kmod-static-nodes.service @148ms +42ms
  └─system.slice
└─-.slice

Also, take note that "After=" doesn't wait for a service to finish
its startup. Maybe, your service is just triggered way to early? You
may want to add "After=network.target" or similar synchronization
points of the graph above.

Make sure that after editing "WantedBy=" you may need to "systemctl
reenable" your service. If you didn't use "systemctl edit --full" you
may also need to use "systemctl daemon-reload" before re-enabling the
service. Otherwise you may see strange effects similar to what you
described.

> Thanks for your valuable feedback.
> 
> Regards,
> Raghavendra H R
> 
> 
> 
> --
> Regards,
> 
> Raghavendra. H. R
> (Raghu)
> 
> On Wed, Oct 5, 2016 at 4:55 PM, Andrei Borzenkov 
> wrote:
> 
> > On Wed, Oct 5, 2016 at 1:19 PM, Raghavendra. H. R
> >  wrote:  
> > > It's working fine now. We should give the default target of the
> > > system  
> > for  
> > > WantedBy= of the Install section.
> > > So I used graphical.target in the Install section and it fixed my
> > > issue. 
> >
> > I doubt it was the reason. grpahical.target pulls in
> > multi-user.target unless you have very customized unit definitions.


-- 
Regards,
Kai

Replies to list-only preferred.


___
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

Re: [systemd-devel] Auto-start of a Service in systemd

[Raghavendra. H. R]

Andrei,

Your doubt is absolutely correct. Default target of the system as nothing
to do with auto start of services.

I checked both graphical.target & multi-user.target, surprisingly I don't
see any big difference in these. Both of the files are almost same except
multi-user.target have dependency *After=* with *rescue.service &
rescue.target* which is restricting multi-user.target from starting.

However graphical.target don't depend on rescue services, so it is active &
started. And by making graphical.target as dependency in my unit file
solved my problem.

Hopefully if I remove the rescue services dependency from multi-user.target
and add it as dependency then my service should come up without failures.


Thanks for your valuable feedback.

Regards,
Raghavendra H R



--
Regards,

Raghavendra. H. R
(Raghu)

On Wed, Oct 5, 2016 at 4:55 PM, Andrei Borzenkov 
wrote:

> On Wed, Oct 5, 2016 at 1:19 PM, Raghavendra. H. R 
> wrote:
> > It's working fine now. We should give the default target of the system
> for
> > WantedBy= of the Install section.
> > So I used graphical.target in the Install section and it fixed my issue.
> >
>
> I doubt it was the reason. grpahical.target pulls in multi-user.target
> unless you have very customized unit definitions.
>
> > Thanks for the information.
> >
> >
> >
> > --
> > Regards,
> >
> > Raghavendra. H. R
> > (Raghu)
> >
> > On Wed, Oct 5, 2016 at 3:12 PM, Raghavendra. H. R 
> > wrote:
> >>
> >> I ran "systemctl enable test.service" but when I restart it shows only
> >> that the service is only enabled but not active and running.
> >>
> >> Here is the status of test.service
> >>
> >> ? test.service - Hey Bings
> >>Loaded: loaded (/lib/systemd/system/test.service; enabled)
> >>Active: inactive (dead)
> >>
> >>
> >> For WantedBy= which attribute should be given, whether it is
> >> "default.target" or the default target of the system ?
> >> Running systemctl get-default shows graphical.target as the default
> >> target.
> >>
> >> --
> >> Regards,
> >>
> >> Raghavendra. H. R
> >> (Raghu)
> >>
> >> On Wed, Oct 5, 2016 at 2:59 PM, Andrei Borzenkov 
> >> wrote:
> >>>
> >>> On Wed, Oct 5, 2016 at 12:23 PM, Raghavendra. H. R <
> raghuh...@gmail.com>
> >>> wrote:
> >>> > Hi All,
> >>> >
> >>> > I'm a newbie in Systemd init system and I'm trying to auto boot/start
> >>> > my
> >>> > service in systemd. But my service gets only enabled and it never
> runs
> >>> > automatically.
> >>> >
> >>> > I modifying my unit file to depend on sysinit.target and
> >>> > multi-user.target
> >>> > by making use of I used After= this also didnt help.
> >>> >
> >>> > I would like to do something in my unit file from which systemd
> starts
> >>> > my
> >>> > service automatically after starting it's own system related
> services.
> >>> >
> >>>
> >>> There is no such thing as "own systemd services". All services are
> >>> equal (but some are more equal than others :)
> >>>
> >>> > Can anyone help me regarding this ?
> >>> >
> >>> >
> >>> > My sample service
> >>> > =
> >>> > [Unit]
> >>> > Description=Hey Bings
> >>> >
> >>> > [Service]
> >>> > ExecStart="Run an executable"
> >>> >
> >>> > [Install]
> >>> > WantedBy=multi-user.target or sysinit.target
> >>> >
> >>>
> >>> sysinit.target is wrong, it should never be used for normal service.
> >>> multi-user.target should work as long as it is your default target (or
> >>> dependency of default target).
> >>>
> >>> You did run "systemctl enable your.service", did not you? What
> >>> "systemctl status your.service" says?
> >>
> >>
> >
>
___
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

Re: [systemd-devel] Auto-start of a Service in systemd

[Lennart Poettering]

On Wed, 05.10.16 14:53, Raghavendra. H. R (raghuh...@gmail.com) wrote:

> Hi All,
> 
> I'm a newbie in Systemd init system and I'm trying to auto boot/start my
> service in systemd. But my service gets only enabled and it never runs
> automatically.
> 
> I modifying my unit file to depend on sysinit.target and multi-user.target
> by making use of I used *After=* this also didnt help.
> 
> *I would like to do something in my unit file from which systemd starts my
> service automatically after starting it's own system related services. *
> 
> Can anyone help me regarding this ?
> 
> 
> My sample service
> =
> [Unit]
> Description=Hey Bings
> 
> [Service]
> ExecStart="Run an executable"
> 
> [Install]
> WantedBy=multi-user.target *or* sysinit.target

You want to use multi-user.target here. "sysinit.target" is only for
special early-boot services.

After dropping in this file use "systemctl enable ..." to hook the
unit into the boot process for subsequent boots. To also start it
immediately, use "systemctl start ...". You may also do both
operations in one go by using "systemctl enable --now ...".

Lennart

-- 
Lennart Poettering, Red Hat
___
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

Re: [systemd-devel] Auto-start of a Service in systemd

[Andrei Borzenkov]

On Wed, Oct 5, 2016 at 1:19 PM, Raghavendra. H. R  wrote:
> It's working fine now. We should give the default target of the system for
> WantedBy= of the Install section.
> So I used graphical.target in the Install section and it fixed my issue.
>

I doubt it was the reason. grpahical.target pulls in multi-user.target
unless you have very customized unit definitions.

> Thanks for the information.
>
>
>
> --
> Regards,
>
> Raghavendra. H. R
> (Raghu)
>
> On Wed, Oct 5, 2016 at 3:12 PM, Raghavendra. H. R 
> wrote:
>>
>> I ran "systemctl enable test.service" but when I restart it shows only
>> that the service is only enabled but not active and running.
>>
>> Here is the status of test.service
>>
>> ? test.service - Hey Bings
>>Loaded: loaded (/lib/systemd/system/test.service; enabled)
>>Active: inactive (dead)
>>
>>
>> For WantedBy= which attribute should be given, whether it is
>> "default.target" or the default target of the system ?
>> Running systemctl get-default shows graphical.target as the default
>> target.
>>
>> --
>> Regards,
>>
>> Raghavendra. H. R
>> (Raghu)
>>
>> On Wed, Oct 5, 2016 at 2:59 PM, Andrei Borzenkov 
>> wrote:
>>>
>>> On Wed, Oct 5, 2016 at 12:23 PM, Raghavendra. H. R 
>>> wrote:
>>> > Hi All,
>>> >
>>> > I'm a newbie in Systemd init system and I'm trying to auto boot/start
>>> > my
>>> > service in systemd. But my service gets only enabled and it never runs
>>> > automatically.
>>> >
>>> > I modifying my unit file to depend on sysinit.target and
>>> > multi-user.target
>>> > by making use of I used After= this also didnt help.
>>> >
>>> > I would like to do something in my unit file from which systemd starts
>>> > my
>>> > service automatically after starting it's own system related services.
>>> >
>>>
>>> There is no such thing as "own systemd services". All services are
>>> equal (but some are more equal than others :)
>>>
>>> > Can anyone help me regarding this ?
>>> >
>>> >
>>> > My sample service
>>> > =
>>> > [Unit]
>>> > Description=Hey Bings
>>> >
>>> > [Service]
>>> > ExecStart="Run an executable"
>>> >
>>> > [Install]
>>> > WantedBy=multi-user.target or sysinit.target
>>> >
>>>
>>> sysinit.target is wrong, it should never be used for normal service.
>>> multi-user.target should work as long as it is your default target (or
>>> dependency of default target).
>>>
>>> You did run "systemctl enable your.service", did not you? What
>>> "systemctl status your.service" says?
>>
>>
>
___
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

Re: [systemd-devel] Auto-start of a Service in systemd

[Raghavendra. H. R]

It's working fine now. We should give the default target of the system
for *WantedBy=
*of the Install section.
So I used graphical.target in the Install section and it fixed my issue.

Thanks for the information.



--
Regards,

Raghavendra. H. R
(Raghu)

On Wed, Oct 5, 2016 at 3:12 PM, Raghavendra. H. R 
wrote:

> I ran *"systemctl enable test.service" *but when I restart it shows only
> that the service is only enabled but not active and running.
>
> Here is the status of test.service
>
> *? test.service - Hey Bings*
> *   Loaded: loaded (/lib/systemd/system/test.service; enabled)*
> *   Active: inactive (dead)*
>
>
> For *WantedBy= *which attribute should be given, whether it is
> "default.target" or the default target of the system ?
> Running *systemctl get-default* shows graphical.target as the default
> target.
>
> --
> Regards,
>
> Raghavendra. H. R
> (Raghu)
>
> On Wed, Oct 5, 2016 at 2:59 PM, Andrei Borzenkov 
> wrote:
>
>> On Wed, Oct 5, 2016 at 12:23 PM, Raghavendra. H. R 
>> wrote:
>> > Hi All,
>> >
>> > I'm a newbie in Systemd init system and I'm trying to auto boot/start my
>> > service in systemd. But my service gets only enabled and it never runs
>> > automatically.
>> >
>> > I modifying my unit file to depend on sysinit.target and
>> multi-user.target
>> > by making use of I used After= this also didnt help.
>> >
>> > I would like to do something in my unit file from which systemd starts
>> my
>> > service automatically after starting it's own system related services.
>> >
>>
>> There is no such thing as "own systemd services". All services are
>> equal (but some are more equal than others :)
>>
>> > Can anyone help me regarding this ?
>> >
>> >
>> > My sample service
>> > =
>> > [Unit]
>> > Description=Hey Bings
>> >
>> > [Service]
>> > ExecStart="Run an executable"
>> >
>> > [Install]
>> > WantedBy=multi-user.target or sysinit.target
>> >
>>
>> sysinit.target is wrong, it should never be used for normal service.
>> multi-user.target should work as long as it is your default target (or
>> dependency of default target).
>>
>> You did run "systemctl enable your.service", did not you? What
>> "systemctl status your.service" says?
>>
>
>
___
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

Re: [systemd-devel] Auto-start of a Service in systemd

[Raghavendra. H. R]

I ran *"systemctl enable test.service" *but when I restart it shows only
that the service is only enabled but not active and running.

Here is the status of test.service

*? test.service - Hey Bings*
*   Loaded: loaded (/lib/systemd/system/test.service; enabled)*
*   Active: inactive (dead)*


For *WantedBy= *which attribute should be given, whether it is
"default.target" or the default target of the system ?
Running *systemctl get-default* shows graphical.target as the default
target.

--
Regards,

Raghavendra. H. R
(Raghu)

On Wed, Oct 5, 2016 at 2:59 PM, Andrei Borzenkov 
wrote:

> On Wed, Oct 5, 2016 at 12:23 PM, Raghavendra. H. R 
> wrote:
> > Hi All,
> >
> > I'm a newbie in Systemd init system and I'm trying to auto boot/start my
> > service in systemd. But my service gets only enabled and it never runs
> > automatically.
> >
> > I modifying my unit file to depend on sysinit.target and
> multi-user.target
> > by making use of I used After= this also didnt help.
> >
> > I would like to do something in my unit file from which systemd starts my
> > service automatically after starting it's own system related services.
> >
>
> There is no such thing as "own systemd services". All services are
> equal (but some are more equal than others :)
>
> > Can anyone help me regarding this ?
> >
> >
> > My sample service
> > =
> > [Unit]
> > Description=Hey Bings
> >
> > [Service]
> > ExecStart="Run an executable"
> >
> > [Install]
> > WantedBy=multi-user.target or sysinit.target
> >
>
> sysinit.target is wrong, it should never be used for normal service.
> multi-user.target should work as long as it is your default target (or
> dependency of default target).
>
> You did run "systemctl enable your.service", did not you? What
> "systemctl status your.service" says?
>
___
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

Re: [systemd-devel] Auto-start of a Service in systemd

[Andrei Borzenkov]

On Wed, Oct 5, 2016 at 12:23 PM, Raghavendra. H. R  wrote:
> Hi All,
>
> I'm a newbie in Systemd init system and I'm trying to auto boot/start my
> service in systemd. But my service gets only enabled and it never runs
> automatically.
>
> I modifying my unit file to depend on sysinit.target and multi-user.target
> by making use of I used After= this also didnt help.
>
> I would like to do something in my unit file from which systemd starts my
> service automatically after starting it's own system related services.
>

There is no such thing as "own systemd services". All services are
equal (but some are more equal than others :)

> Can anyone help me regarding this ?
>
>
> My sample service
> =
> [Unit]
> Description=Hey Bings
>
> [Service]
> ExecStart="Run an executable"
>
> [Install]
> WantedBy=multi-user.target or sysinit.target
>

sysinit.target is wrong, it should never be used for normal service.
multi-user.target should work as long as it is your default target (or
dependency of default target).

You did run "systemctl enable your.service", did not you? What
"systemctl status your.service" says?
___
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

[systemd-devel] Auto-start of a Service in systemd

[Raghavendra. H. R]

Hi All,

I'm a newbie in Systemd init system and I'm trying to auto boot/start my
service in systemd. But my service gets only enabled and it never runs
automatically.

I modifying my unit file to depend on sysinit.target and multi-user.target
by making use of I used *After=* this also didnt help.

*I would like to do something in my unit file from which systemd starts my
service automatically after starting it's own system related services. *

Can anyone help me regarding this ?


My sample service
=
[Unit]
Description=Hey Bings

[Service]
ExecStart="Run an executable"

[Install]
WantedBy=multi-user.target *or* sysinit.target


--
Regards,

Raghavendra. H. R
(Raghu)
___
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel