Hello,
First of all: I hope I am posting this to the correct maillinglist, if not then
I'm sorry!
I am having big issues with my OpenBSD 5.4 (Also had these issues prior to
upgrading to 5.4). The server is a complete new installation - I have tried
this setup with 3 different servers from different manufactures, and 4
different network cards (HP 100 Mbit, HP 4x1 Gbit, Intel 2x1 Gbit, Trend Net
1Gbit). The server is loaded with 4Gigs of RAM, and have plenty of resources
available. Current load is 0.10. Kernel have not been modified or altered.
The setup is as following: BGPD configured, routing enabled. The BGPD works
fine, I get all the prefixes loaded, as seen below.
# bgpctl show
Neighbor ASMsgRcvdMsgSent OutQ Up/Down State/PrfRcvd
TDC 3292 82071
16 0 00:12:47 476299
This is my sysctl.conf (kern.bufcache and net.inet.ip was added trying to
resolve this issue, without result.)
net.inet.ip.forwarding=1# 1=Permit forwarding (routing) of IPv4 packets
kern.bufcachepercent=50
net.inet.ip.ifq.maxlen=512
The issue is: I am having big diffeculties with routing my packets both to
internal hosts, and external hosts. Periodically when tracing/pinging from my
OpenBSD, it just can't route successfully. This also affect my ingoing and
outgoing traffic, by resulting in lost packets.
This is an example of attempting to ping:
# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: No route to host
ping: wrote 8.8.8.8 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 8.8.8.8 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 8.8.8.8 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 8.8.8.8 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 8.8.8.8 64 chars, ret=-1
64 bytes from 8.8.8.8: icmp_seq=5 ttl=51 time=23.881 ms
64 bytes from 8.8.8.8: icmp_seq=6 ttl=51 time=22.117 ms
Second attempt:
# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: No route to host
ping: wrote 8.8.8.8 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 8.8.8.8 64 chars, ret=-1
ping: sendto: No route to host
ping: wrote 8.8.8.8 64 chars, ret=-1
64 bytes from 8.8.8.8: icmp_seq=3 ttl=51 time=22.276 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=51 time=22.315 ms
Third attempt:
# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=51 time=22.356 ms
64 bytes from 8.8.8.8: icmp_seq=1 ttl=51 time=22.309 ms
And this just keeps going on, sometimes 100% sucessfully, sometimes with 2-xx
packets lost before routing is successful.
Trace-routes to internal hosts:
# traceroute 212.70.x.x
traceroute to 212.70.x.x (212.70.x.x), 64 hops max, 40 byte packets
1 firewall (212.70.x.x5) 0.260 ms 0.224 ms 0.111 ms
2 php (212.70.x.x) 0.496 ms 0.484 ms 0.352 ms
Second attempt:
# traceroute 212.70.x.x
traceroute to 212.70.x.x (212.70.x.x), 64 hops max, 40 byte packets
1 firewall (212.70.x.x5) 0.176 ms 0.223 ms 0.235 ms
2 php (212.70.x.x) 0.483 ms 0.474 ms 0.363 ms
Third attempt:
# traceroute 212.70.x.x
traceroute to 212.70.x.x (212.70.x.x), 64 hops max, 40 byte packets
sendto: No route to host
1 traceroute: wrote 212.70.x.x 40 chars, ret=-1
*sendto: No route to host
traceroute: wrote 212.70.x.x 40 chars, ret=-1
*sendto: No route to host
traceroute: wrote 212.70.x.x 40 chars, ret=-1
*sendto: No route to host
2 traceroute: wrote 212.70.x.x 40 chars, ret=-1
*sendto: No route to host
traceroute: wrote 212.70.x.x 40 chars, ret=-1
*sendto: No route to host
traceroute: wrote 212.70.x.x 40 chars, ret=-1
*
3 php (212.70.x.x) 0.416 ms 0.482 ms 0.474 ms
Any suggestions on how I can further debug this issue, or possible resolve this
once in for all? I can grant access to the server as well, if anyone feels like
debugging.
Looking forward to some replies. Thank you in advance.
Best regards, Alex Mathiasen