Got two APU2b4 boards yesterday, and they fail to boot 5.8 or
-current, i386 or amd64, from USB early in the process (see below).
So far, I could not figure out if there are differences to your setup
from your dmesgs. Eventually, did you revceive an earlier hardware
revision APU2a4, with an earlier version of coreboot?
Also, I tried to lower serial line speed from the initial 115k of
coreboot, for the (unlikely) case that the kernel should change it.
Finally, 'boot -c' dos not get as far as to UKC in order to try with
ACPI disabled etc.
What is your serial console output at boot time? Any ideas or
suggestions what I should try next?
Thanks,
Rolf
console output from power-up:
Mainboard PCEngines apu2 Enable.
APIC: 00 missing read_resources
APIC: 01 missing read_resources
APIC: 02 missing read_resources
APIC: 03 missing read_resources
SeaBIOS (version rel-1.8.0-181-g0af5958)
BUILD: gcc: (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4 binutils: (GNU Binutils for Ubu4
SeaBIOS (version rel-1.8.0-181-g0af5958)
BUILD: gcc: (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4 binutils: (GNU Binutils for Ubu4
Found coreboot cbmem console @ dffdf000
Found mainboard PC Engines PCEngines apu2
Relocating init from 0x000eeb10 to 0xdff66fd0 (size 28576)
Found CBFS header at 0xfc50
multiboot: eax=0, ebx=0
boot order:
1: /pci@i0cf8/usb@10/usb-*@1
2: /pci@i0cf8/usb@10/usb-*@2
SeaBIOS (version rel-1.8.0-181-g0af5958)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte contexts
XHCIextcap 0x1 @ feb22500
XHCIprotocol USB 3.00, 2 ports (offset 1), def 0
XHCIprotocol USB 2.00, 2 ports (offset 3), def 10
XHCIextcap 0xa @ feb22540
Found 2 serial ports
Searching bootorder for: /pci@i0cf8/*@14,7
EHCI init on dev 00:13.0 (regs=0xfeb25420)
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/setup
XHCI port #3: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
Initialized USB HUB (0 ports used)
WARNING - Timeout at xhci_event_wait:694!
xhci_send_pipe: xfer failed (cc -1)
Searching bootorder for: /pci@i0cf8/usb@10/storage@3/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@10/usb-*@3
USB MSC vendor='JetFlash' product='Transcend 1GB' rev='8.07' type=0 removable=1
USB MSC blksize=512 sectors=1972224
All threads complete.
Scan for option roms
PCengines Press F10 key now for boot menu:
Searching bootorder for: HALT
drive 0x000f5850: PCHS=0/0/0 translation=lba LCHS=978/32/63 s=1972224
Space available for UMB: c1000-ef000, f-f5850
Returned 258048 bytes of ZoneHigh
e820 map has 7 items:
0: - 0009f800 = 1 RAM
1: 0009f800 - 000a = 2 RESERVED
2: 000f - 0010 = 2 RESERVED
3: 0010 - dffad000 = 1 RAM
4: dffad000 - e000 = 2 RESERVED
5: f800 - fc00 = 2 RESERVED
6: 0001 - 00011f00 = 1 RAM
enter handle_19:
NULL
Booting from Hard Disk...
Booting from :7c00
Using drive 0, partition 3.
Loading.
probing: pc0 com0 com1 mem[638K 3582M 496M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.28
boot>
cannot open hd0a:/etc/random.seed: No such file or directory
booting hd0a:/5.8/amd64/bsd.rd: 3251512+1391248+2401280+0+520192 [72+360480+23]8
entry point at 0x1000160 [7205c766, 3404, 24448b12, a680a304]
(output stops here)
