Re: Unable to mount SAN IBM DS3400 through Qlogic HBA 24XX on openbsd 5.1
Still i am waiting for some hope. Nobody attach SAN With openbsd till now in the world ?. > Dear all, > > I am unable to detect and mount SAN volume. Can anyone guide me about the > step or tutorial. How to detect/mount SAN VOLUME. Here i am attaching the > dmesg and error given below > > isp0 at pci4 dev 0 function 0 "QLogic ISP2432" rev 0x03: apic 9 int 6 > isp0: board type 2422 rev 0x3, resident firmware rev 4.0.26 > scsibus0 at isp0: 512 targets, WWPN 2124ff364ae8, WWNN > 2024ff364ae8 > isp0: 0.0.0 FCP RESPONSE: 0x2 > isp0: 0.0.0 FCP RESPONSE: 0x2 > isp0: 0.1.0 FCP RESPONSE: 0x2 > isp0: 0.1.0 FCP RESPONSE: 0x2 > isp1 at pci4 dev 0 function 1 "QLogic ISP2432" rev 0x03: apic 9 int 13 > isp1: board type 2422 rev 0x3, resident firmware rev 4.0.26 > scsibus1 at isp1: 512 targets, WWPN 2124ff364ae9, WWNN > 2024ff364ae9 > isp1: 0.0.0 FCP RESPONSE: 0x2 > isp1: 0.0.0 FCP RESPONSE: 0x2 > isp1: 0.1.0 FCP RESPONSE: 0x2 > isp1: 0.1.0 FCP RESPONSE: 0x2 > > Any help will be appreciable. > > Best Regards > > - This email was sent using the NIT Rourkela Webmail. "Nation Institute of Technology - Rourkela" http://www.nitrkl.ac.in This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If your mail still contains virus forward it to "s...@nitrkl.ac.in"
Unable to mount SAN IBM DS3400 through Qlogic HBA 24XX on openbsd 5.1
[demime 1.01d removed an attachment of type multipart/mixed] This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If your mail still contains virus forward it to "s...@nitrkl.ac.in"
Re: System is halted while installing on IBM x 3550 M3 server
> On 2012/08/22 06:13, mu...@nitrkl.ac.in wrote: >> > >> > If you try an amd64 -current snapshot, are the disks detected? >> > >> > Can you install to a USB stick and get a dmesg / pcidump / acpidump >> for >> > amd64? >> > >> Yes in amd64 -current snapshot disks are detected. and installation >> complete successfully. But its get freeze while booting, and booting is >> not completed. Here the last message where the Operating system get >> freeze. > > Ah good, this gives us more to work with. > >> acpimcfg0 at acpi0 addr 0x8000, bus 0-255 >> acpihpet0 at acpi0: 14318179 Hz >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus 11 (PCI1) >> acpiprt2 at acpi0: bus 21 (PCI3) >> acpiprt3 at acpi0: bus -1 (PCI6) >> acpiprt4 at acpi0: bus 26 (PCI7) >> acpiprt5 at acpi0: bus -1 (PCI9) >> acpicpu0 at acpi0uvm_fault(0x80d33f40, 0x0, 0, 1) -> e >> kernel: page fault trap, code=0 >> Stopped at acpicpu_getpss+0x193: movq0(%rax),%rdi >> acpicpu_getpss() at acpicpu_getpss+0x193 >> acpicpu_attach() at acpicpu_attach+0x154 > > OK - reboot and when you reach the boot loader prompt, "boot -c". > You should then get a UKC prompt where you can "disable acpicpu" > and "quit". I'm hoping this will let the system boot - not fully > working but enough to obtain further information. > > If you can get into the OS, run (as root): > > acpidump -o x3550m3 > > This should create a number of files, please tar them up and > try to copy them to another system. Ideally copy them to a web > server and post the URL in a reply here (attachments aren't > accepted on the list). If you don't have a web server you can > use, send them off-list to me and I'll upload them somewhere. > Hopefully this will contain enough information that a developer > who knows ACPI will be able to take a look. > This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If your > mail still contains virus forward it to "s...@nitrkl.ac.in" I have upload the acpidump on given address http://27.251.188.3/dump.zip Please check and suggest - This email was sent using the NIT Rourkela Webmail. "Nation Institute of Technology - Rourkela" http://www.nitrkl.ac.in This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If your mail still contains virus forward it to "s...@nitrkl.ac.in"
Re: System is halted while installing on IBM x 3550 M3 server
> On 2012/08/22 06:13, mu...@nitrkl.ac.in wrote: >> > >> > If you try an amd64 -current snapshot, are the disks detected? >> > >> > Can you install to a USB stick and get a dmesg / pcidump / acpidump >> for >> > amd64? >> > >> Yes in amd64 -current snapshot disks are detected. and installation >> complete successfully. But its get freeze while booting, and booting is >> not completed. Here the last message where the Operating system get >> freeze. > > Ah good, this gives us more to work with. > >> acpimcfg0 at acpi0 addr 0x8000, bus 0-255 >> acpihpet0 at acpi0: 14318179 Hz >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus 11 (PCI1) >> acpiprt2 at acpi0: bus 21 (PCI3) >> acpiprt3 at acpi0: bus -1 (PCI6) >> acpiprt4 at acpi0: bus 26 (PCI7) >> acpiprt5 at acpi0: bus -1 (PCI9) >> acpicpu0 at acpi0uvm_fault(0x80d33f40, 0x0, 0, 1) -> e >> kernel: page fault trap, code=0 >> Stopped at acpicpu_getpss+0x193: movq0(%rax),%rdi >> acpicpu_getpss() at acpicpu_getpss+0x193 >> acpicpu_attach() at acpicpu_attach+0x154 > > OK - reboot and when you reach the boot loader prompt, "boot -c". > You should then get a UKC prompt where you can "disable acpicpu" > and "quit". I'm hoping this will let the system boot - not fully > working but enough to obtain further information. > > If you can get into the OS, run (as root): > > acpidump -o x3550m3 > > This should create a number of files, please tar them up and > try to copy them to another system. Ideally copy them to a web > server and post the URL in a reply here (attachments aren't > accepted on the list). If you don't have a web server you can > use, send them off-list to me and I'll upload them somewhere. > Hopefully this will contain enough information that a developer > who knows ACPI will be able to take a look. acpidump can be download from http://110.234.26.243/dump.zip Please check suggest. - This email was sent using the NIT Rourkela Webmail. "Nation Institute of Technology - Rourkela" http://www.nitrkl.ac.in This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If your mail still contains virus forward it to "s...@nitrkl.ac.in"
Re: System is halted while installing on IBM x 3550 M3 server
>> > On 19 August 2012 08:52, wrote:
>> >> I am using openbsd 5.1 i386 arch. While installing openbsd5.1 i get
>> >> these
>> >> error message.
>> >>
>> >> acpi0 at bios0:rev2uvm_fault (0xd07ea4,.)
>> >> fatal page_fault (6) in supervisor mode
>> >> trap type 6 code 0eipd02ef7ba cs 8 eflage 10006 cr2 4e4553440 cpl 90
>> >> panic trap type 6 code=0,pc=d02ef7ba
>> >> The operating system is halted
>> >> Press any key to reboot.
>> >>
>> >> I have also tried amd64 arch. but it is not detecting SAS based RAID
>> >> Driver. That why server HDD is not detected.
>> >>
>> >
>> > Please paste the full dmesg, up to the panic.
>> >
>> >
> On 2012/08/20 17:27, mu...@nitrkl.ac.in wrote:
>> I cant send dmesg because i got this panic trap after booting from
>> CDROAM
>> while installing Openbsd on IBM x 3550 M3 server. i am using i386 Arch
>> CDROM.
>
> If you try an amd64 -current snapshot, are the disks detected?
>
> Can you install to a USB stick and get a dmesg / pcidump / acpidump for
> amd64?
>
Yes in amd64 -current snapshot disks are detected. and installation
complete successfully. But its get freeze while booting, and booting is
not completed. Here the last message where the Operating system get
freeze.
acpimcfg0 at acpi0 addr 0x8000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 11 (PCI1)
acpiprt2 at acpi0: bus 21 (PCI3)
acpiprt3 at acpi0: bus -1 (PCI6)
acpiprt4 at acpi0: bus 26 (PCI7)
acpiprt5 at acpi0: bus -1 (PCI9)
acpicpu0 at acpi0uvm_fault(0x80d33f40, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at acpicpu_getpss+0x193: movq0(%rax),%rdi
acpicpu_getpss() at acpicpu_getpss+0x193
acpicpu_attach() at acpicpu_attach+0x154
config_attach() at config_attach+0x1d4
acpi_add_device() at acpi_add_device+0x9d
aml_walknodes() at aml_walknodes+0x7b
aml_walknodes() at aml_walknodes+0x51
aml_walknodes() at aml_walknodes+0x51
acpi_attach() at acpi_attach+0x508
config_attach() at config_attach+0x1d4
bios_attach() at bios_attach+0x218
end trace frame: 0x80e3bd90, count: 0
ddb{0}
Please suggest ?
-
This email was sent using the NIT Rourkela Webmail.
"Nation Institute of Technology - Rourkela"
http://www.nitrkl.ac.in
This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If your mail
still contains virus forward it to "s...@nitrkl.ac.in"
Re: System is halted while installing on IBM x 3550 M3 server
>> > On 19 August 2012 08:52, wrote:
>> >> I am using openbsd 5.1 i386 arch. While installing openbsd5.1 i get
>> >> these
>> >> error message.
>> >>
>> >> acpi0 at bios0:rev2uvm_fault (0xd07ea4,.)
>> >> fatal page_fault (6) in supervisor mode
>> >> trap type 6 code 0eipd02ef7ba cs 8 eflage 10006 cr2 4e4553440 cpl 90
>> >> panic trap type 6 code=0,pc=d02ef7ba
>> >> The operating system is halted
>> >> Press any key to reboot.
>> >>
>> >> I have also tried amd64 arch. but it is not detecting SAS based RAID
>> >> Driver. That why server HDD is not detected.
>> >>
>> >
>> > Please paste the full dmesg, up to the panic.
>> >
>> >
> On 2012/08/20 17:27, mu...@nitrkl.ac.in wrote:
>> I cant send dmesg because i got this panic trap after booting from
>> CDROAM
>> while installing Openbsd on IBM x 3550 M3 server. i am using i386 Arch
>> CDROM.
>
> If you try an amd64 -current snapshot, are the disks detected?
>
> Can you install to a USB stick and get a dmesg / pcidump / acpidump for
> amd64?
>
Yes in amd64 -current snapshot disks are detected. and installation
complete successfully. But its get freeze while booting, and booting is
not completed. Here the last message where the Operating system get
freeze.
acpimcfg0 at acpi0 addr 0x8000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 11 (PCI1)
acpiprt2 at acpi0: bus 21 (PCI3)
acpiprt3 at acpi0: bus -1 (PCI6)
acpiprt4 at acpi0: bus 26 (PCI7)
acpiprt5 at acpi0: bus -1 (PCI9)
acpicpu0 at acpi0uvm_fault(0x80d33f40, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at acpicpu_getpss+0x193: movq0(%rax),%rdi
acpicpu_getpss() at acpicpu_getpss+0x193
acpicpu_attach() at acpicpu_attach+0x154
config_attach() at config_attach+0x1d4
acpi_add_device() at acpi_add_device+0x9d
aml_walknodes() at aml_walknodes+0x7b
aml_walknodes() at aml_walknodes+0x51
aml_walknodes() at aml_walknodes+0x51
acpi_attach() at acpi_attach+0x508
config_attach() at config_attach+0x1d4
bios_attach() at bios_attach+0x218
end trace frame: 0x80e3bd90, count: 0
ddb{0}
Please suggest ?
-
This email was sent using the NIT Rourkela Webmail.
"Nation Institute of Technology - Rourkela"
http://www.nitrkl.ac.in
This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If your mail
still contains virus forward it to "s...@nitrkl.ac.in"
Re: System is halted while installing on IBM x 3550 M3 server
>> > On 19 August 2012 08:52, wrote: >> >> I am using openbsd 5.1 i386 arch. While installing openbsd5.1 i get >> >> these >> >> error message. >> >> >> >> acpi0 at bios0:rev2uvm_fault (0xd07ea4,.) >> >> fatal page_fault (6) in supervisor mode >> >> trap type 6 code 0eipd02ef7ba cs 8 eflage 10006 cr2 4e4553440 cpl 90 >> >> panic trap type 6 code=0,pc=d02ef7ba >> >> The operating system is halted >> >> Press any key to reboot. >> >> >> >> I have also tried amd64 arch. but it is not detecting SAS based RAID >> >> Driver. That why server HDD is not detected. >> >> >> > >> > Please paste the full dmesg, up to the panic. >> > >> > > On 2012/08/20 17:27, mu...@nitrkl.ac.in wrote: >> I cant send dmesg because i got this panic trap after booting from >> CDROAM >> while installing Openbsd on IBM x 3550 M3 server. i am using i386 Arch >> CDROM. > > If you try an amd64 -current snapshot, are the disks detected? > > Can you install to a USB stick and get a dmesg / pcidump / acpidump for > amd64? > Yes in amd64 -current snapshot disks are detected. and installation complete successfully. But its get freeze while booting, and booting is not completed. Here the last error message where the Operating system freeze. - This email was sent using the NIT Rourkela Webmail. "Nation Institute of Technology - Rourkela" http://www.nitrkl.ac.in This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If your mail still contains virus forward it to "s...@nitrkl.ac.in"
Re: System is halted while installing on IBM x 3550 M3 server
I cant send dmesg because i got this panic trap after booting from CDROAM while installing Openbsd on IBM x 3550 M3 server. i am using i386 Arch CDROM. > On 19 August 2012 08:52, wrote: >> Dear all, >> >> I am using openbsd 5.1 i386 arch. While installing openbsd5.1 i get >> these >> error message. >> >> acpi0 at bios0:rev2uvm_fault (0xd07ea4,.) >> fatal page_fault (6) in supervisor mode >> trap type 6 code 0eipd02ef7ba cs 8 eflage 10006 cr2 4e4553440 cpl 90 >> panic trap type 6 code=0,pc=d02ef7ba >> The operating system is halted >> Press any key to reboot. >> >> I have also tried amd64 arch. but it is not detecting SAS based RAID >> Driver. That why server HDD is not detected. >> >> Any help would be appreciable. >> >> Best Regards >> > > Please paste the full dmesg, up to the panic. > > >> >> - >> This email was sent using the NIT Rourkela Webmail. >> "Nation Institute of Technology - Rourkela" >> http://www.nitrkl.ac.in >> This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If >> your mail still contains virus forward it to "s...@nitrkl.ac.in" >>This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If >> your mail still contains virus forward it to "s...@nitrkl.ac.in" - This email was sent using the NIT Rourkela Webmail. "Nation Institute of Technology - Rourkela" http://www.nitrkl.ac.in This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If your mail still contains virus forward it to "s...@nitrkl.ac.in"
System is halted while installing on IBM x 3550 M3 server
Dear all, I am using openbsd 5.1 i386 arch. While installing openbsd5.1 i get these error message. acpi0 at bios0:rev2uvm_fault (0xd07ea4,.) fatal page_fault (6) in supervisor mode trap type 6 code 0eipd02ef7ba cs 8 eflage 10006 cr2 4e4553440 cpl 90 panic trap type 6 code=0,pc=d02ef7ba The operating system is halted Press any key to reboot. I have also tried amd64 arch. but it is not detecting SAS based RAID Driver. That why server HDD is not detected. Any help would be appreciable. Best Regards - This email was sent using the NIT Rourkela Webmail. "Nation Institute of Technology - Rourkela" http://www.nitrkl.ac.in This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If your mail still contains virus forward it to "s...@nitrkl.ac.in"
