subject:"Re\: PC Engines APU2 coming soon \- how is OpenBSD's support so far\?"

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-21 Thread Mathias Schmocker


Le 16.11.15 18:42, Jason Barbier a écrit :

Looks like you need to email support and get the updated BIOS. I had the
same problem and there is an update to the bios to allow for mSATA boot
but not SD card boot yet.


Yes, mSATA install and boot works after this bios update:
  http://pcengines.ch/file/apu151109.zip

  SeaBIOS (version rel-1.8.0-190-gc029eab-20151109_141843-wim-ws)
  BUILD: gcc:  binutils: (GNU Binutils) 2.23.2
  <...>
  Google, Inc.
  Serial Graphics Adapter 08/22/15
  SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ 
(wiv@coreboot-Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015


But hooking a 2TB WD Element HDD still hangs the APU2 on the next reboot 
(4k sectors, USB 3.0, bad init timings in the bios ?)


Symptoms:
  Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
  WARNING - Timeout at wait_bit:310!
  <...>
  USB MSC vendor='WD' product='Elements 10B8' rev='1012' type=0 removable=0
  call16 with invalid stack

And if you choose the memtest payload, there is no way to abort it.

Mathias

On Sat, Nov 14, 2015, at 10:22 AM, Mathias Schmocker wrote:
> Le 14.11.15 17:02, Chris Cappuccio a écrit :
>  > Mathias Schmocker [s...@smat.ch] wrote:
>  >>
>  >> First tests with a bootable OpenBSD amd64 5.8-current USB stick and
>  >> installation on the 16GB mSata internal storage.
>  >> After reboot, BIOS could find mSata to boot on, but defaulted to the
> memtest
>  >> boot payload
>  >>
>  >
>  > This is a setting you can change, although the default boot order
> would put memtest last.
>
> Not for me:
>
> 1. USB MSC Drive SanDisk Ultra Fit 1.00
> 2. Payload [memtest]
> 3. Payload [setup]
>
> I have now successfully installed and booted on a small 16GB SanDisk USB
> key, root on sd1a (but I had a hard lockup once, with >
> xhci_wait_for_command: Command ring still running ...)
>
> But pressing F10 and 3 to access setup and placing mSata in front of all
> the other does NOT work (even if sd0a has a bootable bsd.rd, /boot and
> the proper /etc/boot.conf, and is accessible once OpenBSD runs out of
> the USB key ...)
>
> Which SeaBIOS, BUILD version, and option rom does your APU2 display when
> booting up ?
>
>  > I've had no problems with apu2 detecting msata so far..
>  >
>  >> Unable to abort memtest by pressing (esc) on the serial console, or
> (c) for
>  >> configure.
>  >>
>  >
>  > You have to escape to the prompt before memtest starts.
>  >
>  >
>

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-21 Thread Stuart Henderson

This is interesting but I think it's straying a bit off-topic for tech@ -
I think misc would be alright for general information about the machine,
though things which are clearly problems with the hw/bios (like not being
able to exit memtest - this is the same on APU1 btw) should go to the vendor.

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-16 Thread Chris Cappuccio

Noth [nothingn...@citycable.ch] wrote:
> Hi again,
> 
>   I think I've found a bug: if I have a console session open using minicom
> or cu when rebooting, the machine hangs. This doesn't happen with either
> CentOS Linux 7 or FreeBSD 10.2 / 11. I can reproduce the problem. Anyone
> else have this issue ?
> 

The boot loader output is emulated video output until it switches to com0.
Once it reads 'stty com0 115200; set tty com0' from /etc/boot.conf, it 
switches from video output to serial output.

During the switch, some contents comes out of the boot loader that is at
the wrong baud rate (or something similar). This causes some high characters
to come out, which your terminal emulator might interpret as a terminal command
and it could even send a short reply back. If it does, this reply stops the
auto-boot process and you sit at boot> indefinitely.

The solution is to not leave a terminal emulator connected during the boot
(or fix the boot loader to not output high characters)

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-16 Thread Jason Barbier

Looks like you need to email support and get the updated BIOS. I had the
same problem and there is an update to the bios to allow for mSATA boot
but not SD card boot yet.

-- 
Jason Barbier | E: jab...@serversave.us
GPG Key-ID: B5F75B47(http://kusuriya.devio.us/pubkey.asc)

On Sat, Nov 14, 2015, at 10:22 AM, Mathias Schmocker wrote:
> Le 14.11.15 17:02, Chris Cappuccio a écrit :
>  > Mathias Schmocker [s...@smat.ch] wrote:
>  >>
>  >> First tests with a bootable OpenBSD amd64 5.8-current USB stick and
>  >> installation on the 16GB mSata internal storage.
>  >> After reboot, BIOS could find mSata to boot on, but defaulted to the 
> memtest
>  >> boot payload
>  >>
>  >
>  > This is a setting you can change, although the default boot order 
> would put memtest last.
> 
> Not for me:
> 
> 1. USB MSC Drive SanDisk Ultra Fit 1.00
> 2. Payload [memtest]
> 3. Payload [setup]
> 
> I have now successfully installed and booted on a small 16GB SanDisk USB 
> key, root on sd1a (but I had a hard lockup once, with > 
> xhci_wait_for_command: Command ring still running ...)
> 
> But pressing F10 and 3 to access setup and placing mSata in front of all 
> the other does NOT work (even if sd0a has a bootable bsd.rd, /boot and 
> the proper /etc/boot.conf, and is accessible once OpenBSD runs out of 
> the USB key ...)
> 
> Which SeaBIOS, BUILD version, and option rom does your APU2 display when 
> booting up ?
> 
>  > I've had no problems with apu2 detecting msata so far..
>  >
>  >> Unable to abort memtest by pressing (esc) on the serial console, or 
> (c) for
>  >> configure.
>  >>
>  >
>  > You have to escape to the prompt before memtest starts.
>  >
>  >
>

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-16 Thread Noth

No it freezes after the "rebooting..." message appears. It isn't before 
the firmware restarts. Hopefully the next firmware release will some 
kind of fix for this.


On 16/11/15 16:00, Chris Cappuccio wrote:

Noth [nothingn...@citycable.ch] wrote:

Hi again,

   I think I've found a bug: if I have a console session open using minicom
or cu when rebooting, the machine hangs. This doesn't happen with either
CentOS Linux 7 or FreeBSD 10.2 / 11. I can reproduce the problem. Anyone
else have this issue ?


The boot loader output is emulated video output until it switches to com0.
Once it reads 'stty com0 115200; set tty com0' from /etc/boot.conf, it
switches from video output to serial output.

During the switch, some contents comes out of the boot loader that is at
the wrong baud rate (or something similar). This causes some high characters
to come out, which your terminal emulator might interpret as a terminal command
and it could even send a short reply back. If it does, this reply stops the
auto-boot process and you sit at boot> indefinitely.

The solution is to not leave a terminal emulator connected during the boot
(or fix the boot loader to not output high characters)

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-16 Thread Chris Cappuccio

Noth [nothingn...@citycable.ch] wrote:
> No it freezes after the "rebooting..." message appears. It isn't before the
> firmware restarts. Hopefully the next firmware release will some kind of fix
> for this.
> 

The non-ACPI kernel does this (bsd.rd). bsd should not do this

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-15 Thread Noth

I'm using the SeaBIOS provided with the machine, and have no news on a 
upcoming newer release. So far it works for me flawlessly with the 
limits stated by the manufacturer.



System startup messages:

SeaBIOS (version rel-1.8.0-143-g174faf8-dirty-20150928_122234-wim-ws)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte 
contexts

XHCIextcap 0x1 @ feb22500
XHCIprotocol USB  3.00, 2 ports (offset 1), def 0
XHCIprotocol USB  2.00, 2 ports (offset 3), def 10
XHCIextcap 0xa @ feb22540
Found 2 serial ports
ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
EHCI init on dev 00:13.0 (regs=0xfeb25420)
ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
Searching bootorder for: /pci@i0cf8/*@14,7
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/setup
ata0-0: SATA SSD ATA-10 Hard-Disk (15272 MiBytes)
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
XHCI port #3: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
Searching bootorder for: /pci@i0cf8/usb@10/storage@3/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@10/usb-*@3
USB MSC vendor='SanDisk' product='Cruzer Fit' rev='1.26' type=0 removable=0
USB MSC blksize=512 sectors=31266816
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
PCengines Press F10 key now for boot menu:
Searching bootorder for: HALT
drive 0x000f2e30: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=31266816
drive 0x000f2e60: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 
s=31277232

Space available for UMB: c1000-ef000, f-f2e30



On 14/11/15 19:22, Mathias Schmocker wrote:

Le 14.11.15 17:02, Chris Cappuccio a écrit :
> Mathias Schmocker [s...@smat.ch] wrote:
>>
>> First tests with a bootable OpenBSD amd64 5.8-current USB stick and
>> installation on the 16GB mSata internal storage.
>> After reboot, BIOS could find mSata to boot on, but defaulted to 
the memtest

>> boot payload
>>
>
> This is a setting you can change, although the default boot order 
would put memtest last.


Not for me:

1. USB MSC Drive SanDisk Ultra Fit 1.00
2. Payload [memtest]
3. Payload [setup]

I have now successfully installed and booted on a small 16GB SanDisk 
USB key, root on sd1a (but I had a hard lockup once, with > 
xhci_wait_for_command: Command ring still running ...)


But pressing F10 and 3 to access setup and placing mSata in front of 
all the other does NOT work (even if sd0a has a bootable bsd.rd, /boot 
and the proper /etc/boot.conf, and is accessible once OpenBSD runs out 
of the USB key ...)


Which SeaBIOS, BUILD version, and option rom does your APU2 display 
when booting up ?


> I've had no problems with apu2 detecting msata so far..
>
>> Unable to abort memtest by pressing (esc) on the serial console, or 
(c) for

>> configure.
>>
>
> You have to escape to the prompt before memtest starts.
>
>

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-15 Thread Noth

Hi again,

  I think I've found a bug: if I have a console session open using 
minicom or cu when rebooting, the machine hangs. This doesn't happen 
with either CentOS Linux 7 or FreeBSD 10.2 / 11. I can reproduce the 
problem. Anyone else have this issue ?

Cheers,

Noth

On 15/11/15 10:09, Noth wrote:
I'm using the SeaBIOS provided with the machine, and have no news on a 
upcoming newer release. So far it works for me flawlessly with the 
limits stated by the manufacturer.

System startup messages:

SeaBIOS (version rel-1.8.0-143-g174faf8-dirty-20150928_122234-wim-ws)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 
byte contexts

XHCIextcap 0x1 @ feb22500
XHCIprotocol USB  3.00, 2 ports (offset 1), def 0
XHCIprotocol USB  2.00, 2 ports (offset 3), def 10
XHCIextcap 0xa @ feb22540
Found 2 serial ports
ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
EHCI init on dev 00:13.0 (regs=0xfeb25420)
ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
Searching bootorder for: /pci@i0cf8/*@14,7
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/setup
ata0-0: SATA SSD ATA-10 Hard-Disk (15272 MiBytes)
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
XHCI port #3: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
Searching bootorder for: /pci@i0cf8/usb@10/storage@3/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@10/usb-*@3
USB MSC vendor='SanDisk' product='Cruzer Fit' rev='1.26' type=0 
removable=0

USB MSC blksize=512 sectors=31266816
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
PCengines Press F10 key now for boot menu:
Searching bootorder for: HALT
drive 0x000f2e30: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=31266816
drive 0x000f2e60: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 
s=31277232

Space available for UMB: c1000-ef000, f-f2e30

On 14/11/15 19:22, Mathias Schmocker wrote:

Le 14.11.15 17:02, Chris Cappuccio a écrit :
> Mathias Schmocker [s...@smat.ch] wrote:
>>
>> First tests with a bootable OpenBSD amd64 5.8-current USB stick and
>> installation on the 16GB mSata internal storage.
>> After reboot, BIOS could find mSata to boot on, but defaulted to 
the memtest

>> boot payload
>>
>
> This is a setting you can change, although the default boot order 
would put memtest last.

Not for me:

1. USB MSC Drive SanDisk Ultra Fit 1.00
2. Payload [memtest]
3. Payload [setup]

I have now successfully installed and booted on a small 16GB SanDisk 
USB key, root on sd1a (but I had a hard lockup once, with > 
xhci_wait_for_command: Command ring still running ...)

But pressing F10 and 3 to access setup and placing mSata in front of 
all the other does NOT work (even if sd0a has a bootable bsd.rd, 
/boot and the proper /etc/boot.conf, and is accessible once OpenBSD 
runs out of the USB key ...)

Which SeaBIOS, BUILD version, and option rom does your APU2 display 
when booting up ?

> I've had no problems with apu2 detecting msata so far..
>
>> Unable to abort memtest by pressing (esc) on the serial console, 
or (c) for

>> configure.
>>
>
> You have to escape to the prompt before memtest starts.
>
>

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-14 Thread Chris Cappuccio

Mathias Schmocker [s...@smat.ch] wrote:
> 
> First tests with a bootable OpenBSD amd64 5.8-current USB stick and
> installation on the 16GB mSata internal storage.
> After reboot, BIOS could find mSata to boot on, but defaulted to the memtest
> boot payload
> 

This is a setting you can change, although the default boot order would put 
memtest last.

I've had no problems with apu2 detecting msata so far..

> Unable to abort memtest by pressing (esc) on the serial console, or (c) for
> configure.
> 

You have to escape to the prompt before memtest starts.

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-14 Thread Mathias Schmocker


Hello,

APU2 BETA TEST 4GB version with:
  SeaBIOS (version rel-1.8.0-181-g0af5958)
  BUILD: gcc: (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4 binutils: (GNU 
Binutils for Ubuntu) 2.24

<...>
  Running option rom at c000:0003

  Google, Inc.
  Serial Graphics Adapter 08/22/15
  SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ 
(wiv@coreboot-  Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015

  Term: 80x24
  IO4 0
  Turning on vga text mode console
<...>

First tests with a bootable OpenBSD amd64 5.8-current USB stick and 
installation on the 16GB mSata internal storage.
After reboot, BIOS could find mSata to boot on, but defaulted to the 
memtest boot payload


Unable to abort memtest by pressing (esc) on the serial console, or (c) 
for configure.


Other install trials with a the bootable USB stick and another USB HDD 
not conclusive yet.


It seems to me that the BETA bios has some trouble to properly and 
reliably detect USB, or boot from mSata.


Mathias

Le 04.11.15 18:31, Noth a écrit :

This is with the -CURRENT :

OpenBSD 5.8-current (GENERIC.MP) #0: Wed Nov  4 17:47:40 CET 2015
r...@euryale.nineinchnetworks.ch:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4261081088 (4063MB)
avail mem = 4127813632 (3936MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdffb7020 (7 entries)
bios0: vendor coreboot version "APU2A_20150924-3-g0bf9198-dirty" date
09/28/2015
bios0: PC Engines apu2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S2 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET
acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4)
PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD GX-412TC SOC, 998.27 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1

cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully
associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD GX-412TC SOC, 998.11 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1

cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully
associative
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD GX-412TC SOC, 998.11 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1

cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully
associative
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD GX-412TC SOC, 998.11 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1

cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully
associative
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec0, version 21, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec2, version 21, 32 pins
ioapic1: misconfigured as apic 0, remapped to apid 5
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PBR4)
acpiprt2 at acpi0: bus 1 (PBR5)
acpiprt3 at acpi0: bus 2 (PBR6)
acpiprt4 at acpi0: bus 3 (PBR7)
acpiprt5 at acpi0: bus -1 (PBR8)
acpicpu0 at acpi0: !C2(0@400 io@0x1771), C1(@1

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-14 Thread Mathias Schmocker


Le 14.11.15 17:02, Chris Cappuccio a écrit :
> Mathias Schmocker [s...@smat.ch] wrote:
>>
>> First tests with a bootable OpenBSD amd64 5.8-current USB stick and
>> installation on the 16GB mSata internal storage.
>> After reboot, BIOS could find mSata to boot on, but defaulted to the 
memtest

>> boot payload
>>
>
> This is a setting you can change, although the default boot order 
would put memtest last.


Not for me:

1. USB MSC Drive SanDisk Ultra Fit 1.00
2. Payload [memtest]
3. Payload [setup]

I have now successfully installed and booted on a small 16GB SanDisk USB 
key, root on sd1a (but I had a hard lockup once, with > 
xhci_wait_for_command: Command ring still running ...)


But pressing F10 and 3 to access setup and placing mSata in front of all 
the other does NOT work (even if sd0a has a bootable bsd.rd, /boot and 
the proper /etc/boot.conf, and is accessible once OpenBSD runs out of 
the USB key ...)


Which SeaBIOS, BUILD version, and option rom does your APU2 display when 
booting up ?


> I've had no problems with apu2 detecting msata so far..
>
>> Unable to abort memtest by pressing (esc) on the serial console, or 
(c) for

>> configure.
>>
>
> You have to escape to the prompt before memtest starts.
>
>

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-12 Thread Rolf Sommerhalder

Got two APU2b4 boards yesterday, and they fail to boot 5.8 or
-current, i386 or amd64, from USB early in the process (see below).

So far, I could not figure out if there are differences to your setup
from your dmesgs. Eventually, did you revceive an earlier hardware
revision APU2a4, with an earlier version of coreboot?

Also, I tried to lower serial line speed from the initial 115k of
coreboot, for the (unlikely) case that the kernel should change it.

Finally, 'boot -c' dos not get as far as to UKC in order to try with
ACPI disabled etc.

What is your serial console output at boot time? Any ideas or
suggestions what I should try next?

Thanks,
Rolf


console output from power-up:

Mainboard PCEngines apu2 Enable.
APIC: 00 missing read_resources
APIC: 01 missing read_resources
APIC: 02 missing read_resources
APIC: 03 missing read_resources
SeaBIOS (version rel-1.8.0-181-g0af5958)
BUILD: gcc: (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4 binutils: (GNU Binutils for Ubu4
SeaBIOS (version rel-1.8.0-181-g0af5958)
BUILD: gcc: (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4 binutils: (GNU Binutils for Ubu4
Found coreboot cbmem console @ dffdf000
Found mainboard PC Engines PCEngines apu2
Relocating init from 0x000eeb10 to 0xdff66fd0 (size 28576)
Found CBFS header at 0xfc50
multiboot: eax=0, ebx=0
boot order:
1: /pci@i0cf8/usb@10/usb-*@1
2: /pci@i0cf8/usb@10/usb-*@2
SeaBIOS (version rel-1.8.0-181-g0af5958)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte contexts
XHCIextcap 0x1 @ feb22500
XHCIprotocol USB  3.00, 2 ports (offset 1), def 0
XHCIprotocol USB  2.00, 2 ports (offset 3), def 10
XHCIextcap 0xa @ feb22540
Found 2 serial ports
Searching bootorder for: /pci@i0cf8/*@14,7
EHCI init on dev 00:13.0 (regs=0xfeb25420)
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/setup
XHCI port #3: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
Initialized USB HUB (0 ports used)
WARNING - Timeout at xhci_event_wait:694!
xhci_send_pipe: xfer failed (cc -1)
Searching bootorder for: /pci@i0cf8/usb@10/storage@3/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@10/usb-*@3
USB MSC vendor='JetFlash' product='Transcend 1GB' rev='8.07' type=0 removable=1
USB MSC blksize=512 sectors=1972224
All threads complete.
Scan for option roms
PCengines Press F10 key now for boot menu:
Searching bootorder for: HALT
drive 0x000f5850: PCHS=0/0/0 translation=lba LCHS=978/32/63 s=1972224
Space available for UMB: c1000-ef000, f-f5850
Returned 258048 bytes of ZoneHigh
e820 map has 7 items:
  0:  - 0009f800 = 1 RAM
  1: 0009f800 - 000a = 2 RESERVED
  2: 000f - 0010 = 2 RESERVED
  3: 0010 - dffad000 = 1 RAM
  4: dffad000 - e000 = 2 RESERVED
  5: f800 - fc00 = 2 RESERVED
  6: 0001 - 00011f00 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from :7c00
Using drive 0, partition 3.
Loading.
probing: pc0 com0 com1 mem[638K 3582M 496M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.28
boot>
cannot open hd0a:/etc/random.seed: No such file or directory
booting hd0a:/5.8/amd64/bsd.rd: 3251512+1391248+2401280+0+520192 [72+360480+23]8
entry point at 0x1000160 [7205c766, 3404, 24448b12, a680a304]
(output stops here)

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-12 Thread Stuart Henderson

set tty com0

On 2015/11/12 14:32, Rolf Sommerhalder wrote:
> Got two APU2b4 boards yesterday, and they fail to boot 5.8 or
> -current, i386 or amd64, from USB early in the process (see below).
> 
> So far, I could not figure out if there are differences to your setup
> from your dmesgs. Eventually, did you revceive an earlier hardware
> revision APU2a4, with an earlier version of coreboot?
> 
> Also, I tried to lower serial line speed from the initial 115k of
> coreboot, for the (unlikely) case that the kernel should change it.
> 
> Finally, 'boot -c' dos not get as far as to UKC in order to try with
> ACPI disabled etc.
> 
> What is your serial console output at boot time? Any ideas or
> suggestions what I should try next?
> 
> Thanks,
> Rolf
> 
> 
> console output from power-up:
> 
> Mainboard PCEngines apu2 Enable.
> APIC: 00 missing read_resources
> APIC: 01 missing read_resources
> APIC: 02 missing read_resources
> APIC: 03 missing read_resources
> SeaBIOS (version rel-1.8.0-181-g0af5958)
> BUILD: gcc: (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4 binutils: (GNU Binutils for 
> Ubu4
> SeaBIOS (version rel-1.8.0-181-g0af5958)
> BUILD: gcc: (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4 binutils: (GNU Binutils for 
> Ubu4
> Found coreboot cbmem console @ dffdf000
> Found mainboard PC Engines PCEngines apu2
> Relocating init from 0x000eeb10 to 0xdff66fd0 (size 28576)
> Found CBFS header at 0xfc50
> multiboot: eax=0, ebx=0
> boot order:
> 1: /pci@i0cf8/usb@10/usb-*@1
> 2: /pci@i0cf8/usb@10/usb-*@2
> SeaBIOS (version rel-1.8.0-181-g0af5958)
> XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte 
> contexts
> XHCIextcap 0x1 @ feb22500
> XHCIprotocol USB  3.00, 2 ports (offset 1), def 0
> XHCIprotocol USB  2.00, 2 ports (offset 3), def 10
> XHCIextcap 0xa @ feb22540
> Found 2 serial ports
> Searching bootorder for: /pci@i0cf8/*@14,7
> EHCI init on dev 00:13.0 (regs=0xfeb25420)
> Searching bootorder for: /rom@img/memtest
> Searching bootorder for: /rom@img/setup
> XHCI port #3: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
> Initialized USB HUB (0 ports used)
> WARNING - Timeout at xhci_event_wait:694!
> xhci_send_pipe: xfer failed (cc -1)
> Searching bootorder for: /pci@i0cf8/usb@10/storage@3/*@0/*@0,0
> Searching bootorder for: /pci@i0cf8/usb@10/usb-*@3
> USB MSC vendor='JetFlash' product='Transcend 1GB' rev='8.07' type=0 
> removable=1
> USB MSC blksize=512 sectors=1972224
> All threads complete.
> Scan for option roms
> PCengines Press F10 key now for boot menu:
> Searching bootorder for: HALT
> drive 0x000f5850: PCHS=0/0/0 translation=lba LCHS=978/32/63 s=1972224
> Space available for UMB: c1000-ef000, f-f5850
> Returned 258048 bytes of ZoneHigh
> e820 map has 7 items:
>   0:  - 0009f800 = 1 RAM
>   1: 0009f800 - 000a = 2 RESERVED
>   2: 000f - 0010 = 2 RESERVED
>   3: 0010 - dffad000 = 1 RAM
>   4: dffad000 - e000 = 2 RESERVED
>   5: f800 - fc00 = 2 RESERVED
>   6: 0001 - 00011f00 = 1 RAM
> enter handle_19:
>   NULL
> Booting from Hard Disk...
> Booting from :7c00
> Using drive 0, partition 3.
> Loading.
> probing: pc0 com0 com1 mem[638K 3582M 496M a20=on]
> disk: hd0+
> >> OpenBSD/amd64 BOOT 3.28
> boot>
> cannot open hd0a:/etc/random.seed: No such file or directory
> booting hd0a:/5.8/amd64/bsd.rd: 3251512+1391248+2401280+0+520192 
> [72+360480+23]8
> entry point at 0x1000160 [7205c766, 3404, 24448b12, a680a304]
> (output stops here)
>

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-12 Thread Rolf Sommerhalder

Many thanks Stuart!

> set tty com0
Bingo, and then reduce serial line speed from 115k to 9600 :-)

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-12 Thread Daniel Ouellet

you got stuck at the same place I did.

For i386/amd64 you have to tell boot you want serial output
either at the boot prompt or via boot.conf.

stty com0 115200
set tty com0

See archive:

http://marc.info/?l=openbsd-misc=144531335118929=2

And this should be on misc@ anyway.

Take care.

Daniel


On 11/12/15 8:32 AM, Rolf Sommerhalder wrote:
> Got two APU2b4 boards yesterday, and they fail to boot 5.8 or
> -current, i386 or amd64, from USB early in the process (see below).
> 
> So far, I could not figure out if there are differences to your setup
> from your dmesgs. Eventually, did you revceive an earlier hardware
> revision APU2a4, with an earlier version of coreboot?
> 
> Also, I tried to lower serial line speed from the initial 115k of
> coreboot, for the (unlikely) case that the kernel should change it.
> 
> Finally, 'boot -c' dos not get as far as to UKC in order to try with
> ACPI disabled etc.
> 
> What is your serial console output at boot time? Any ideas or
> suggestions what I should try next?
> 
> Thanks,
> Rolf
> 
> 
> console output from power-up:
> 
> Mainboard PCEngines apu2 Enable.
> APIC: 00 missing read_resources
> APIC: 01 missing read_resources
> APIC: 02 missing read_resources
> APIC: 03 missing read_resources
> SeaBIOS (version rel-1.8.0-181-g0af5958)
> BUILD: gcc: (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4 binutils: (GNU Binutils for 
> Ubu4
> SeaBIOS (version rel-1.8.0-181-g0af5958)
> BUILD: gcc: (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4 binutils: (GNU Binutils for 
> Ubu4
> Found coreboot cbmem console @ dffdf000
> Found mainboard PC Engines PCEngines apu2
> Relocating init from 0x000eeb10 to 0xdff66fd0 (size 28576)
> Found CBFS header at 0xfc50
> multiboot: eax=0, ebx=0
> boot order:
> 1: /pci@i0cf8/usb@10/usb-*@1
> 2: /pci@i0cf8/usb@10/usb-*@2
> SeaBIOS (version rel-1.8.0-181-g0af5958)
> XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte 
> contexts
> XHCIextcap 0x1 @ feb22500
> XHCIprotocol USB  3.00, 2 ports (offset 1), def 0
> XHCIprotocol USB  2.00, 2 ports (offset 3), def 10
> XHCIextcap 0xa @ feb22540
> Found 2 serial ports
> Searching bootorder for: /pci@i0cf8/*@14,7
> EHCI init on dev 00:13.0 (regs=0xfeb25420)
> Searching bootorder for: /rom@img/memtest
> Searching bootorder for: /rom@img/setup
> XHCI port #3: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
> Initialized USB HUB (0 ports used)
> WARNING - Timeout at xhci_event_wait:694!
> xhci_send_pipe: xfer failed (cc -1)
> Searching bootorder for: /pci@i0cf8/usb@10/storage@3/*@0/*@0,0
> Searching bootorder for: /pci@i0cf8/usb@10/usb-*@3
> USB MSC vendor='JetFlash' product='Transcend 1GB' rev='8.07' type=0 
> removable=1
> USB MSC blksize=512 sectors=1972224
> All threads complete.
> Scan for option roms
> PCengines Press F10 key now for boot menu:
> Searching bootorder for: HALT
> drive 0x000f5850: PCHS=0/0/0 translation=lba LCHS=978/32/63 s=1972224
> Space available for UMB: c1000-ef000, f-f5850
> Returned 258048 bytes of ZoneHigh
> e820 map has 7 items:
>   0:  - 0009f800 = 1 RAM
>   1: 0009f800 - 000a = 2 RESERVED
>   2: 000f - 0010 = 2 RESERVED
>   3: 0010 - dffad000 = 1 RAM
>   4: dffad000 - e000 = 2 RESERVED
>   5: f800 - fc00 = 2 RESERVED
>   6: 0001 - 00011f00 = 1 RAM
> enter handle_19:
>   NULL
> Booting from Hard Disk...
> Booting from :7c00
> Using drive 0, partition 3.
> Loading.
> probing: pc0 com0 com1 mem[638K 3582M 496M a20=on]
> disk: hd0+
>>> OpenBSD/amd64 BOOT 3.28
> boot>
> cannot open hd0a:/etc/random.seed: No such file or directory
> booting hd0a:/5.8/amd64/bsd.rd: 3251512+1391248+2401280+0+520192 
> [72+360480+23]8
> entry point at 0x1000160 [7205c766, 3404, 24448b12, a680a304]
> (output stops here)
>

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-09 Thread Chris Cappuccio

Brian Conway [bcon...@rcesoftware.com] wrote:
> I meant positioning the whole case bottom-up (i.e. but the hot surface
> at the top).

Oh I see!

I just got a beta unit. I was late to the party. I used some of this
ZM-STG1 thermal grease (comes with a paint applicator type brush) and
the integrated memtest goes between 46 and 47 C. With intel ethernet,
four cores and usb3, this is a pretty nice unit!

I wonder if these are four discrete cores or if AMD is playing games
(like the bulldozer lawsuit as of late.)

Chris

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-09 Thread Brian Conway

I meant positioning the whole case bottom-up (i.e. but the hot surface
at the top).

Brian Conway

On Mon, Nov 9, 2015 at 9:28 AM, Chris Cappuccio  wrote:
> Brian Conway [bcon...@rcesoftware.com] wrote:
>>
>> Taking into account Mr. Cappuccio's advice on using thermal paste
>> between the CPU and heat spreader, and also positioning it bottom-up,
>> this one stabilized at 51 C at idle. I haven't had a chance to do much
>> benchmarking for higher temps yet, other than a run of `openssl speed`
>> to warm it up.
>
> If you put the heat speader upside down, the sticky pad would be against
> the cpu heatsink contact area?? There's only one way to put that device in.

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-09 Thread Chris Cappuccio

Brian Conway [bcon...@rcesoftware.com] wrote:
> 
> Taking into account Mr. Cappuccio's advice on using thermal paste
> between the CPU and heat spreader, and also positioning it bottom-up,
> this one stabilized at 51 C at idle. I haven't had a chance to do much
> benchmarking for higher temps yet, other than a run of `openssl speed`
> to warm it up.

If you put the heat speader upside down, the sticky pad would be against
the cpu heatsink contact area?? There's only one way to put that device in.

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-06 Thread Brian Conway

Not much different to report with the 2 GB model, other than the
expected changes in memory size and ethernet chips. Everything seems
to work well.

Taking into account Mr. Cappuccio's advice on using thermal paste
between the CPU and heat spreader, and also positioning it bottom-up,
this one stabilized at 51 C at idle. I haven't had a chance to do much
benchmarking for higher temps yet, other than a run of `openssl speed`
to warm it up.

Brian Conway

OpenBSD 5.8-current (GENERIC.MP) #1574: Thu Nov  5 22:51:41 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1996152832 (1903MB)
avail mem = 1931587584 (1842MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x77fb7020 (7 entries)
bios0: vendor coreboot version "APU2A_20150924-3-g0bf9198-dirty" date 09/28/2015
bios0: PC Engines apu2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S2 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET
acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4)
PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD GX-412TC SOC, 998.25 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD GX-412TC SOC, 998.13 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD GX-412TC SOC, 998.13 MHz
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD GX-412TC SOC, 998.13 MHz
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec0, version 21, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec2, version 21, 32 pins
ioapic1: misconfigured as apic 0, remapped to apid 5
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PBR4)
acpiprt2 at acpi0: bus 1 (PBR5)
acpiprt3 at acpi0: bus 2 (PBR6)
acpiprt4 at acpi0: bus 3 (PBR7)
acpiprt5 at acpi0: bus -1 (PBR8)
acpicpu0 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
cpu0: 998 MHz: speeds: 1000 800 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Root Complex" rev 0x00
pchb1 at pci0 dev 2 function 0 "AMD AMD64 16h Host" rev 0x00
ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:0d:b9:3f:9d:84
ppb1 at

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-04 Thread Noth


Got my first beta board today, here's the dmesg:

OpenBSD 5.8 (GENERIC.MP) #1: Mon Oct 19 02:13:53 CEST 2015
r...@openbsd64.nineinchnetworks.ch:/root/binpatchng-2.1.2/work-binpatch58-amd64/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4261081088 (4063MB)
avail mem = 4128047104 (3936MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdffb7020 (7 entries)
bios0: vendor coreboot version "APU2A_20150924-3-g0bf9198-dirty" date 
09/28/2015

bios0: PC Engines apu2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S2 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET
acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) 
PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4)

acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD GX-412TC SOC, 998.27 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 
64b/line 16-way L2 cache

cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD GX-412TC SOC, 998.13 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 
64b/line 16-way L2 cache

cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD GX-412TC SOC, 998.13 MHz
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 
64b/line 16-way L2 cache

cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD GX-412TC SOC, 998.17 MHz
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 
64b/line 16-way L2 cache

cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec0, version 21, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec2, version 21, 32 pins
ioapic1: misconfigured as apic 0, remapped to apid 5
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PBR4)
acpiprt2 at acpi0: bus 1 (PBR5)
acpiprt3 at acpi0: bus 2 (PBR6)
acpiprt4 at acpi0: bus 3 (PBR7)
acpiprt5 at acpi0: bus -1 (PBR8)
acpicpu0 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
cpu0: 998 MHz: speeds: 1000 800 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "AMD", unknown product 0x1566 rev 0x00
pchb1 at pci0 dev 2 function 0 vendor "AMD", unknown product 0x156b rev 0x00
ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address 
00:0d:b9:3f:9e:0c

ppb1 at pci0 dev 2 function 3 "AMD AMD64 16h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I210" rev 0x03: msi, address 
00:0d:b9:3f:9e:0d

ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address 
00:0d:b9:3f:9e:0e
vendor

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-04 Thread Noth


This is with the -CURRENT :

OpenBSD 5.8-current (GENERIC.MP) #0: Wed Nov  4 17:47:40 CET 2015
r...@euryale.nineinchnetworks.ch:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4261081088 (4063MB)
avail mem = 4127813632 (3936MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdffb7020 (7 entries)
bios0: vendor coreboot version "APU2A_20150924-3-g0bf9198-dirty" date 
09/28/2015

bios0: PC Engines apu2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S2 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET
acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) 
PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4)

acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD GX-412TC SOC, 998.27 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 
64b/line 16-way L2 cache

cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD GX-412TC SOC, 998.11 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 
64b/line 16-way L2 cache

cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD GX-412TC SOC, 998.11 MHz
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 
64b/line 16-way L2 cache

cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD GX-412TC SOC, 998.11 MHz
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 
64b/line 16-way L2 cache

cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec0, version 21, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec2, version 21, 32 pins
ioapic1: misconfigured as apic 0, remapped to apid 5
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PBR4)
acpiprt2 at acpi0: bus 1 (PBR5)
acpiprt3 at acpi0: bus 2 (PBR6)
acpiprt4 at acpi0: bus 3 (PBR7)
acpiprt5 at acpi0: bus -1 (PBR8)
acpicpu0 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
cpu0: 998 MHz: speeds: 1000 800 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Root Complex" rev 0x00
pchb1 at pci0 dev 2 function 0 "AMD AMD64 16h Host" rev 0x00
ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address 
00:0d:b9:3f:9e:0c

ppb1 at pci0 dev 2 function 3 "AMD AMD64 16h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I210" rev 0x03: msi, address 
00:0d:b9:3f:9e:0d

ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address 
00:0d:b9:3f:9e:0e

"AMD CCP" rev 0x00 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 16

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-04 Thread Adam Van Ymeren

On Sat, Oct 31, 2015 at 2:29 PM, Theo de Raadt  wrote:
>>Whilst browsing their forums I found a link to this:
>> http://pcengines.ch/apu2b4.htm . AMD Jaguar APU, 4 cores, up to 4Gb
>> DDR1333 ram with ECC, and 3 intel i211 or i210 NICs. Hopefully there
>> won't be so many issues with this iteration of their APU series.
>
> Hopefully.
>
> It would be nice if some developers get some early, to verify this.
> Otherwise, I agree, there could be lots of pain once again.
>

I don't know the details of PC Engine's beta program, but if any
developers need a hardware donation let me know and I'll try to help.

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-04 Thread Stuart Henderson

this will probably get you a cpu temperature sensor.

Index: km.c
===
RCS file: /cvs/src/sys/dev/pci/km.c,v
retrieving revision 1.10
diff -u -p -r1.10 km.c
--- km.c14 Mar 2015 03:38:48 -  1.10
+++ km.c4 Nov 2015 17:44:25 -
@@ -72,7 +72,8 @@ static const struct pci_matchid km_devic
{ PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_14_MISC },
{ PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_15_0x_MISC },
{ PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_15_1x_MISC },
-   { PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_16_MISC }
+   { PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_16_MISC },
+   { PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_16_3X_MISC }
 };

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-04 Thread Noth


Thanks Stuart, that works for me!

# sysctl hw
hw.machine=amd64
hw.model=AMD GX-412TC SOC
hw.ncpu=4
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0:47e18331a1a8156e
hw.diskcount=1
hw.sensors.km0.temp0=59.38 degC
hw.cpuspeed=998
hw.setperf=100
hw.vendor=PC Engines
hw.product=apu2
hw.version=1.0
hw.serialno=123456789
hw.physmem=4261081088
hw.usermem=4261056512
hw.ncpufound=4
hw.allowpowerdown=1
hw.perfpolicy=manual

On 04/11/15 18:47, Stuart Henderson wrote:

this will probably get you a cpu temperature sensor.

Index: km.c
===
RCS file: /cvs/src/sys/dev/pci/km.c,v
retrieving revision 1.10
diff -u -p -r1.10 km.c
--- km.c14 Mar 2015 03:38:48 -  1.10
+++ km.c4 Nov 2015 17:44:25 -
@@ -72,7 +72,8 @@ static const struct pci_matchid km_devic
{ PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_14_MISC },
{ PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_15_0x_MISC },
{ PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_15_1x_MISC },
-   { PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_16_MISC }
+   { PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_16_MISC },
+   { PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_16_3X_MISC }
  };

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

2015-11-04 Thread Chris Cappuccio

Noth,
I got my APU (first rev) to go from 56-58 temps down to 49-50 by using heatsink 
paste instead of the thermal pad...

Noth [nothingn...@citycable.ch] wrote:
> Thanks Stuart, that works for me!
> 
> # sysctl hw
> hw.machine=amd64
> hw.model=AMD GX-412TC SOC
> hw.ncpu=4
> hw.byteorder=1234
> hw.pagesize=4096
> hw.disknames=sd0:47e18331a1a8156e
> hw.diskcount=1
> hw.sensors.km0.temp0=59.38 degC
> hw.cpuspeed=998
> hw.setperf=100
> hw.vendor=PC Engines
> hw.product=apu2
> hw.version=1.0
> hw.serialno=123456789
> hw.physmem=4261081088
> hw.usermem=4261056512
> hw.ncpufound=4
> hw.allowpowerdown=1
> hw.perfpolicy=manual
> 
> On 04/11/15 18:47, Stuart Henderson wrote:
> >this will probably get you a cpu temperature sensor.
> >
> >Index: km.c
> >===
> >RCS file: /cvs/src/sys/dev/pci/km.c,v
> >retrieving revision 1.10
> >diff -u -p -r1.10 km.c
> >--- km.c 14 Mar 2015 03:38:48 -  1.10
> >+++ km.c 4 Nov 2015 17:44:25 -
> >@@ -72,7 +72,8 @@ static const struct pci_matchid km_devic
> > { PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_14_MISC },
> > { PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_15_0x_MISC },
> > { PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_15_1x_MISC },
> >-{ PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_16_MISC }
> >+{ PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_16_MISC },
> >+{ PCI_VENDOR_AMD, PCI_PRODUCT_AMD_AMD64_16_3X_MISC }
> >  };
> >

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

Re: PC Engines APU2 coming soon - how is OpenBSD's support so far?

25 matches

Site Navigation

Mail list logo

Footer information