Re: [Therion] How to render very big cave with centerline and LROU only?
Hello Martin, thank you very much, again, however i cannot reproduce the issue right now. It seems that it vanished even with my original problematic dataset. The most probable error source lies in my thconfig file somewhere, and the second most possible error source is in the dataset itself. It seems, that i made an error somewhere, maybe some partially data already included but forgotten to comment out. Thank you very much for all your help. If the problem occurs again, i will contact you for a teamviewer session (maybe i can also beg permission to share the dataset then - sorry that this is an issue, but our Katasterwart is a little tight on such things). With best regards! Am 2017-03-18 9:16, schrieb Martin Sluka: It is very interesting for me. Because select in Survey structure should work exactly as you described - to ignore all scrap and maps informations. Again, may I help you screen to screen? There is no any chance to steal your data! Martin Originalnachricht Betreff: Re: [Therion] How to render very big cave with centerline and LROU only? + screenshot Datum: 2017-03-18 12:53 Absender: Benedikt HallingerEmpfänger: Martin Sluka Hello Martin, thank you very much, again, however i cannot reproduce the issue right now. It seems that it vanished even with my original problematic dataset. The most probable error source lies in my thconfig file somewhere, and the second most possible error source is in the dataset itself. It seems, that i made an error somewhere, maybe some partially data already included but forgotten to comment out. Thank you very much for all your help. If the problem occurs again, i will contact you for a teamviewer session. With best regards! Am 2017-03-18 9:16, schrieb Martin Sluka: It is very interesting for me. Because select in Survey structure should work exactly as you described - to ignore all scrap and maps informations. Again, may I help you screen to screen? There is no any chance to steal your data! Martin Am 2017-03-18 0:22, schrieb Benedikt Hallinger via Therion: Hello again, i now stripped my cave data from all scrap imports. Only centerline data remains in the dataset. The result is now, that the export with only "MyCave" selected magically works, so the problem has to be somewhere in my scraps and NOT in therion itself. I think i need to dig into this deeper, but regarding the mailing list, this issue can be considered done. Thank you everybody for help, private and public! You are amazing! Am 2017-03-11 22:29, schrieb Benedikt Hallinger via Therion: Hello, this did not work unfortunately. However i got a solution. The data structure looks as following: MyCave +---Region-A | + Survey-1 | + Survey-2 | - ... +---Region-B | + Subregion-B1 | + Survey-B1-1 | - Survey-B1-2 | + Survey-2 | - ... ... The error occurs with the map defined in compilerfile as: source map onlyCenterline -projection plan MyCave endmap endsource It does NOT occur if i specifiy every sublevel explicitely source map onlyCenterline -projection plan #MyCave Region-A@MyCave Region-B@MyCave endmap endsource This seems to be a usable workaround. It would be interesting what causes the error, tough. Greetings, Beni Am 2017-03-10 8:00, schrieb Martin Sluka: There could be an error in scraps somewhere. Try to use lower scale and add to layout "debug on" to check if there is not something wrong. Odesláno z iPhonu 9. 3. 2017 v 22:43, Benedikt Hallinger via Therion : Hello, i try to generate a PDF with the whole cave rendered with LRUD centerline data only. The goal here is to generate a complete picture of the cave (>100km) with walls generated from LROU data, because i still have very few scraps at this time. However therion aborts with an error. How can i render a complex and big system into such a map? Currently there are only a few scraps in the data and yet i get problems, it seems... is an atlas project with caves this big not possible? For the compile, i generated a map in the compiler file, that selects the centerline only: source map onlyCenterline -projection plan #Zubringer@Hirlatzhoehle # <- this renders fine Hirlatzhoehle endmap endsource And the following layout: layout LROU colour map-fg [100 0 0] symbol-show group centerline scale 1 5000 endlayout However, when i try to compile it, i get the following error: Transcript written on data.log. converting scraps ... done making map ... done This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2015/dev/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./data.tex (./th_enc.tex) (./th_texts.tex) (./th_resources.tex (/usr/share/texlive/texmf-dist/tex/generic/pdftex/glyphtounicode.tex))
Re: [Therion] How to render very big cave with centerline and LROU only?
Hello again, i now stripped my cave data from all scrap imports. Only centerline data remains in the dataset. The result is now, that the export with only "MyCave" selected magically works, so the problem has to be somewhere in my scraps and NOT in therion itself. I think i need to dig into this deeper, but regarding the mailing list, this issue can be considered done. Thank you everybody for help, private and public! You are amazing! Am 2017-03-11 22:29, schrieb Benedikt Hallinger via Therion: Hello, this did not work unfortunately. However i got a solution. The data structure looks as following: MyCave +---Region-A | + Survey-1 | + Survey-2 | - ... +---Region-B | + Subregion-B1 | + Survey-B1-1 | - Survey-B1-2 | + Survey-2 | - ... ... The error occurs with the map defined in compilerfile as: source map onlyCenterline -projection plan MyCave endmap endsource It does NOT occur if i specifiy every sublevel explicitely source map onlyCenterline -projection plan #MyCave Region-A@MyCave Region-B@MyCave endmap endsource This seems to be a usable workaround. It would be interesting what causes the error, tough. Greetings, Beni Am 2017-03-10 8:00, schrieb Martin Sluka: There could be an error in scraps somewhere. Try to use lower scale and add to layout "debug on" to check if there is not something wrong. Odesláno z iPhonu 9. 3. 2017 v 22:43, Benedikt Hallinger via Therion: Hello, i try to generate a PDF with the whole cave rendered with LRUD centerline data only. The goal here is to generate a complete picture of the cave (>100km) with walls generated from LROU data, because i still have very few scraps at this time. However therion aborts with an error. How can i render a complex and big system into such a map? Currently there are only a few scraps in the data and yet i get problems, it seems... is an atlas project with caves this big not possible? For the compile, i generated a map in the compiler file, that selects the centerline only: source map onlyCenterline -projection plan #Zubringer@Hirlatzhoehle # <- this renders fine Hirlatzhoehle endmap endsource And the following layout: layout LROU colour map-fg [100 0 0] symbol-show group centerline scale 1 5000 endlayout However, when i try to compile it, i get the following error: Transcript written on data.log. converting scraps ... done making map ... done This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2015/dev/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./data.tex (./th_enc.tex) (./th_texts.tex) (./th_resources.tex (/usr/share/texlive/texmf-dist/tex/generic/pdftex/glyphtounicode.tex)) (./th_fontdef.tex{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}) (./th_formdef.tex Runaway text? 794.15 ! TeX capacity exceeded, sorry [main memory size=500]. l.286830 \PL{794.15 1 423.19 794.21 1423.05 794.31 1422.94 c}% ! ==> Fatal error occurred, no output PDF file produced! Transcript written on data.log. therion: error -- pdftex exit code -- 256 Thank you very much! ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
Re: [Therion] How to render very big cave with centerline and LROU only?
Hello, this did not work unfortunately. However i got a solution. The data structure looks as following: MyCave +---Region-A | + Survey-1 | + Survey-2 | - ... +---Region-B | + Subregion-B1 | + Survey-B1-1 | - Survey-B1-2 | + Survey-2 | - ... ... The error occurs with the map defined in compilerfile as: source map onlyCenterline -projection plan MyCave endmap endsource It does NOT occur if i specifiy every sublevel explicitely source map onlyCenterline -projection plan #MyCave Region-A@MyCave Region-B@MyCave endmap endsource This seems to be a usable workaround. It would be interesting what causes the error, tough. Greetings, Beni Am 2017-03-10 8:00, schrieb Martin Sluka: There could be an error in scraps somewhere. Try to use lower scale and add to layout "debug on" to check if there is not something wrong. Odesláno z iPhonu 9. 3. 2017 v 22:43, Benedikt Hallinger via Therion: Hello, i try to generate a PDF with the whole cave rendered with LRUD centerline data only. The goal here is to generate a complete picture of the cave (>100km) with walls generated from LROU data, because i still have very few scraps at this time. However therion aborts with an error. How can i render a complex and big system into such a map? Currently there are only a few scraps in the data and yet i get problems, it seems... is an atlas project with caves this big not possible? For the compile, i generated a map in the compiler file, that selects the centerline only: source map onlyCenterline -projection plan #Zubringer@Hirlatzhoehle # <- this renders fine Hirlatzhoehle endmap endsource And the following layout: layout LROU colour map-fg [100 0 0] symbol-show group centerline scale 1 5000 endlayout However, when i try to compile it, i get the following error: Transcript written on data.log. converting scraps ... done making map ... done This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2015/dev/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./data.tex (./th_enc.tex) (./th_texts.tex) (./th_resources.tex (/usr/share/texlive/texmf-dist/tex/generic/pdftex/glyphtounicode.tex)) (./th_fontdef.tex{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}) (./th_formdef.tex Runaway text? 794.15 ! TeX capacity exceeded, sorry [main memory size=500]. l.286830 \PL{794.15 1 423.19 794.21 1423.05 794.31 1422.94 c}% ! ==> Fatal error occurred, no output PDF file produced! Transcript written on data.log. therion: error -- pdftex exit code -- 256 Thank you very much! ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
Re: [Therion] How to render very big cave with centerline and LROU only?
There could be an error in scraps somewhere. Try to use lower scale and add to layout "debug on" to check if there is not something wrong. Odesláno z iPhonu 9. 3. 2017 v 22:43, Benedikt Hallinger via Therion: > Hello, > i try to generate a PDF with the whole cave rendered with LRUD centerline > data only. > The goal here is to generate a complete picture of the cave (>100km) with > walls generated from LROU data, because i still have very few scraps at this > time. > > However therion aborts with an error. > How can i render a complex and big system into such a map? > Currently there are only a few scraps in the data and yet i get problems, it > seems... is an atlas project with caves this big not possible? > > > > For the compile, i generated a map in the compiler file, that selects the > centerline only: > source > map onlyCenterline -projection plan >#Zubringer@Hirlatzhoehle # <- this renders fine >Hirlatzhoehle > endmap > endsource > > > And the following layout: > layout LROU > colour map-fg [100 0 0] > symbol-show group centerline > scale 1 5000 > endlayout > > > However, when i try to compile it, i get the following error: > Transcript written on data.log. > converting scraps ... done > making map ... done > This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2015/dev/Debian) > (preloaded format=pdfetex) > restricted \write18 enabled. > entering extended mode > (./data.tex (./th_enc.tex) (./th_texts.tex) (./th_resources.tex > (/usr/share/texlive/texmf-dist/tex/generic/pdftex/glyphtounicode.tex)) > (./th_fontdef.tex{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}) > (./th_formdef.tex > Runaway text? > 794.15 > ! TeX capacity exceeded, sorry [main memory size=500]. > l.286830 \PL{794.15 1 > 423.19 794.21 1423.05 794.31 1422.94 c}% > ! ==> Fatal error occurred, no output PDF file produced! > Transcript written on data.log. > therion: error -- pdftex exit code -- 256 > > > > Thank you very much! > > ___ > Therion mailing list > Therion@speleo.sk > https://mailman.speleo.sk/listinfo/therion ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
Re: [Therion] How to render very big cave with centerline and LROU only?
Try scale 1:1 Odesláno z iPhonu 9. 3. 2017 v 22:43, Benedikt Hallinger via Therion: > Hello, > i try to generate a PDF with the whole cave rendered with LRUD centerline > data only. > The goal here is to generate a complete picture of the cave (>100km) with > walls generated from LROU data, because i still have very few scraps at this > time. > > However therion aborts with an error. > How can i render a complex and big system into such a map? > Currently there are only a few scraps in the data and yet i get problems, it > seems... is an atlas project with caves this big not possible? > > > > For the compile, i generated a map in the compiler file, that selects the > centerline only: > source > map onlyCenterline -projection plan >#Zubringer@Hirlatzhoehle # <- this renders fine >Hirlatzhoehle > endmap > endsource > > > And the following layout: > layout LROU > colour map-fg [100 0 0] > symbol-show group centerline > scale 1 5000 > endlayout > > > However, when i try to compile it, i get the following error: > Transcript written on data.log. > converting scraps ... done > making map ... done > This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2015/dev/Debian) > (preloaded format=pdfetex) > restricted \write18 enabled. > entering extended mode > (./data.tex (./th_enc.tex) (./th_texts.tex) (./th_resources.tex > (/usr/share/texlive/texmf-dist/tex/generic/pdftex/glyphtounicode.tex)) > (./th_fontdef.tex{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}) > (./th_formdef.tex > Runaway text? > 794.15 > ! TeX capacity exceeded, sorry [main memory size=500]. > l.286830 \PL{794.15 1 > 423.19 794.21 1423.05 794.31 1422.94 c}% > ! ==> Fatal error occurred, no output PDF file produced! > Transcript written on data.log. > therion: error -- pdftex exit code -- 256 > > > > Thank you very much! > > ___ > Therion mailing list > Therion@speleo.sk > https://mailman.speleo.sk/listinfo/therion ___ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
[Therion] How to render very big cave with centerline and LROU only?
Hello, i try to generate a PDF with the whole cave rendered with LRUD centerline data only. The goal here is to generate a complete picture of the cave (>100km) with walls generated from LROU data, because i still have very few scraps at this time. However therion aborts with an error. How can i render a complex and big system into such a map? Currently there are only a few scraps in the data and yet i get problems, it seems... is an atlas project with caves this big not possible? For the compile, i generated a map in the compiler file, that selects the centerline only: source map onlyCenterline -projection plan #Zubringer@Hirlatzhoehle # <- this renders fine Hirlatzhoehle endmap endsource And the following layout: layout LROU colour map-fg [100 0 0] symbol-show group centerline scale 1 5000 endlayout However, when i try to compile it, i get the following error: Transcript written on data.log. converting scraps ... done making map ... done This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2015/dev/Debian) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./data.tex (./th_enc.tex) (./th_texts.tex) (./th_resources.tex (/usr/share/texlive/texmf-dist/tex/generic/pdftex/glyphtounicode.tex)) (./th_fontdef.tex{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}) (./th_formdef.tex Runaway text? 794.15 ! TeX capacity exceeded, sorry [main memory size=500]. l.286830 \PL{794.15 1 423.19 794.21 1423.05 794.31 1422.94 c}% ! ==> Fatal error occurred, no output PDF file produced! Transcript written on data.log. therion: error -- pdftex exit code -- 256 Thank you very much!therion 5.3.15 initialization file: /etc/therion.ini reading ... done configuration file: plan.DOP.PolyLROU.thconfig reading ... done reading source files ... done preprocessing database ... done therion: warning -- unable to determine magnetic declination for undated surveys output coordinate system: EPSG:31258 meridian convergence (deg): -0.2178 geomag declinations (deg): 1953.1.1 -2.2093 1954.1.1 -2.1206 1955.1.1 -2.0319 1956.1.1 -1.9389 1957.1.1 -1.8461 1958.1.1 -1.7535 1959.1.1 -1.6610 1960.1.1 -1.5686 1961.1.1 -1.4921 1962.1.1 -1.4156 1963.1.1 -1.3393 1964.1.1 -1.2631 1965.1.1 -1.1871 1966.1.1 -1.1437 1967.1.1 -1.1005 1968.1.1 -1.0573 1969.1.1 -1.0142 1970.1.1 -0.9712 1971.1.1 -0.9266 1972.1.1 -0.8821 1973.1.1 -0.8377 1974.1.1 -0.7934 1975.1.1 -0.7492 1976.1.1 -0.6314 1977.1.1 -0.5137 1978.1.1 -0.3962 1979.1.1 -0.2788 1980.1.1 -0.1615 1981.1.1 -0.0583 1982.1.1 0.0449 1983.1.1 0.1481 1984.1.1 0.2513 1985.1.1 0.3544 1986.1.1 0.4268 1987.1.1 0.4991 1988.1.1 0.5715 1989.1.1 0.6439 1990.1.1 0.7164 1991.1.1 0.7998 1992.1.1 0.8833 1993.1.1 0.9668 1994.1.1 1.0502 1995.1.1 1.1337 1996.1.1 1.2211 1997.1.1 1.3084 1998.1.1 1.3956 1999.1.1 1.4828 2000.1.1 1.5699 2001.1.1 1.6631 2002.1.1 1.7563 2003.1.1 1.8494 2004.1.1 1.9424 2005.1.1 2.0353 2006.1.1 2.1426 2007.1.1 2.2497 2008.1.1 2.3567 2009.1.1 2.4636 2010.1.1 2.5704 2011.1.1 2.6935 2012.1.1 2.8165 2013.1.1 2.9393 2014.1.1 3.0620 2015.1.1 3.1846 scanning centreline tree ... done searching for centerline loops ... done calculating station coordinates ... done average loop error: 2.19% processing survey data ... ### cavern log file 1> Survex 1.2.16 2> Copyright © 1990-2014 Olly Betts 3> 4> Vermessung enthält 11251 Messpunkte, verbunden durch 11398 Messstrecken. 5> Es gibt 148 Ringverbindungen. 6> Gesamtlänge der Messstrecken = 108390.45m (108831.36m ausgeglichen) 7> Gesamte Horizontallänge der Messstrecken = 98150.28m 8> Gesamte Vertikallänge der Messstrecken = 30832.22m 9> Vertikale Erstreckung = 1078.66m (von 4849 auf 1525.49m bis 9326 auf 446.83m) 10> Nord-Süd-Erstreckung = 3689.86m (von 106 bei 267515.91m bis 11053 bei 263826.05m) 11> Ost-West-Erstreckung = 5360.55m (von 11054 bei 475825.23m bis 4738 bei 470464.67m) 12> 1453 1-Verzweigungspunkte. 13> 8649 2-Verzweigungspunkte. 14> 932 3-Verzweigungspunkte. 15> 65 4-Verzweigungspunkte. 16> 36 5-Verzweigungspunkte. 17> 85 6-Verzweigungspunkte. 18> 13 7-Verzweigungspunkte. 19>5 8-Verzweigungspunkte. 20>3 9-Verzweigungspunkte. 21>1 10-Verzweigungspunkt. 22>2 11-Verzweigungspunkte. 23>1 13-Verzweigungspunkt. 24>3 14-Verzweigungspunkte. 25>2 18-Verzweigungspunkte. 26>1 22-Verzweigungspunkt. 27> # transcription 4> 11251 : 3.0@27.Westen.Hirlatzhoehle 5> 148 : 4.1@B6.Obere_Brandgrabenhoehle.Hirlatzhoehle 9> 4849 : 8.A402@287.Suedwesten.Hirlatzhoehle -- 9326 : AP_273/1-8@274.Kessel.Hirschaulabyrinth.Hirlatzhoehle 10> 106 : 1.6e@B5.Obere_Brandgrabenhoehle.Hirlatzhoehle -- 11053 : 2.128@279.Unterfeld.Hirlatzhoehle 11>