Re: [time-nuts] Power glitch
david-tay...@blueyonder.co.uk said: Does the glitch mean you had a 16-second outage or what? I'm not clear. Yes. For the previous year or so, my local power has been very good. I've seen occasional off-by-one counts in both directions but nothing more interesting than that. I haven't tracked single-cycle steps down to either the raw power or my collection setup. Here are examples: http://www.megapathdsl.net/~hmurray/time-nuts/60Hz/60Hz-2012-Jan-17-a-drop.p ng http://www.megapathdsl.net/~hmurray/time-nuts/60Hz/60Hz-2012-Jan-26-a-pick.p ng Note that the vertical scale is cycles rather than seconds. I also see occasional cases where it looks like a generator is dropping off line and it takes a while for the rest of the system to catch up: http://www.megapathdsl.net/~hmurray/time-nuts/60Hz/60Hz-2012-Mar-30-a-dip.pn g One of these days, I'll capture the audio. BTW: although the URLs have a .PNG file extension, the images come across in .GIF format. Are you converting on-the-fly? Thanks for the heads-up. It was just a fatfinger. They should be fixed now. -- These are my opinions. I hate spam. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Power glitch
david-tay...@blueyonder.co.uk said: Does the glitch mean you had a 16-second outage or what? I'm not clear. Yes. For the previous year or so, my local power has been very good. I've seen occasional off-by-one counts in both directions but nothing more interesting than that. I haven't tracked single-cycle steps down to either the raw power or my collection setup. Here are examples: http://www.megapathdsl.net/~hmurray/time-nuts/60Hz/60Hz-2012-Jan-17-a-drop.p ng http://www.megapathdsl.net/~hmurray/time-nuts/60Hz/60Hz-2012-Jan-26-a-pick.p ng Note that the vertical scale is cycles rather than seconds. I also see occasional cases where it looks like a generator is dropping off line and it takes a while for the rest of the system to catch up: http://www.megapathdsl.net/~hmurray/time-nuts/60Hz/60Hz-2012-Mar-30-a-dip.pn g One of these days, I'll capture the audio. BTW: although the URLs have a .PNG file extension, the images come across in .GIF format. Are you converting on-the-fly? Thanks for the heads-up. It was just a fatfinger. They should be fixed now. -- === Thanks for that, Hal. I would set up some monitoring myself except that I don't have a UPS so even a 16-second outage would not be recorded. Could use a portable PC, I suppose... We have perhaps one outage every two years on average, and they last for at least 30 minutes, so I might need a generator as well as a UPS! Not worth it - I don't mind being dragged away from the desk for a while - might catch up with read a magazine or two. Fascinating plots - thanks for sharing. Cheers, David -- SatSignal Software - Quality software written to your requirements Web: http://www.satsignal.eu Email: david-tay...@blueyonder.co.uk ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Power glitch
Actually, the UPS will monitor glitches. Of course, not to the quality of what Hal is doing. I get the occasional glitch every few months, which the UPS absorbs. You can hear it click. I use a double conversion UPS, so voltage and frequency aren't an issue. [If you are going to use a UPS, double conversion is the way to go. Noisy though.] On 6/21/2012 1:03 AM, David J Taylor wrote: david-tay...@blueyonder.co.uk said: Does the glitch mean you had a 16-second outage or what? I'm not clear. Yes. For the previous year or so, my local power has been very good. I've seen occasional off-by-one counts in both directions but nothing more interesting than that. I haven't tracked single-cycle steps down to either the raw power or my collection setup. Here are examples: http://www.megapathdsl.net/~hmurray/time-nuts/60Hz/60Hz-2012-Jan-17-a-drop.p ng http://www.megapathdsl.net/~hmurray/time-nuts/60Hz/60Hz-2012-Jan-26-a-pick.p ng Note that the vertical scale is cycles rather than seconds. I also see occasional cases where it looks like a generator is dropping off line and it takes a while for the rest of the system to catch up: http://www.megapathdsl.net/~hmurray/time-nuts/60Hz/60Hz-2012-Mar-30-a-dip.pn g One of these days, I'll capture the audio. BTW: although the URLs have a .PNG file extension, the images come across in .GIF format. Are you converting on-the-fly? Thanks for the heads-up. It was just a fatfinger. They should be fixed now. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Lady Heather V3.10 release
Le 21/06/2012 00:18, mike cook a écrit : 39.517°N, 76.794°W Recognise it? Flashy place near Baltimor. Oops I just looked at the installed properties and see they point to a LH server. Aargh! All OK now. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. 21/06/2012 11:04 It confused the hell out of me, too, for a while until I looked at the icon's description properly! :) -- Best Regards, Chris Wilson. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] 10 MHz low pass filter
The inductors used in this board look like multilayer ceramic chip types. They actually have a fairly low stray field around them and they're wound around an axis that's perpendicular to the PCB. Most of the solenoidal coupling will be in the axis normal to the board. While rotating inductors relative to each other is a good general practice it doesn't help much in this instance. One thing we have found that helps, though, is voiding the ground underneath the inductor. In filters where you're trying to get more than about 40 dB of rejection it's possible to have coupling through induced ground currents that will just end up bypassing the filter by coupling from one stage to the next. We had a case in the past where we were fixing a customer design that used a 2 stage crystal filter. The filter nulls were off by something like 20 dB from the data sheets and the measured data from the filter vendor. Standing the in/out matching inductors up vertically and wiring them back down to the board made the response look like it should. Voiding the ground under the inductors on the next board spin fixed the problem. Self inductance and self resonance of the capacitors is always something to watch out for. The general rule of thumb we use for generic NPO multilayer chip capacitors is an inductance on the order of 1.0 to 1.3 nH for 0402 or 0603 size parts. The better RF specific parts from MuRata, ATC, and Johanson will have lower inductance and higher SRF. Typically a good bypass capacitor for 900 MHz is 18 to 22 pF and for 2.4 GHz it's 6.8 or 8.2 pF. At 10 Mhz and the first few harmonics values on the order of 1 to 20 nF would be below SRF. -John -Original Message- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Thomas S. Knutsen Sent: Wednesday, June 20, 2012 6:57 PM To: li...@lazygranch.com Cc: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] 10 MHz low pass filter I don't have any problems with rotating the inductors, after all, that is one of the best way to avoid coupling between them, but the main problem as I see with that board is that there are 2 caps that would become an series resonance with the inductance in the via to reach the ground plane. Of course, at 10MHz this is just theoretical, since the problem most probably would appear above 500MHz, and the 50'th harmonic of an OXCO should be low. My experience says that the inductance in the capacitor it self should be low, specialy if NP0 or such capacitors caps are used. An 10MHz sallen key lowpass may be interesting to build,and with the GHz bandwith op-amps avaible today, it should work great. Thomas. 2012/6/21 li...@lazygranch.com ** In the days when I had access to a network analyzer with a chip component fixture (all calibrated of course), I tested components on hand just to see how ideal they were. Chip resistors are quite good. The inductance is basically the electrical length of the device. Caps can be decent. My recollection is Johanson had some really good (low parasitic) caps. Inductors basically suck. You will note in most RF board design with lumped elements, they rotate adjacent inductors to reduce mutual inductance. 10MHz is probably too low in frequency for practical stripline. You could probably do active filters these days, but the power budget would not be trivial. -- *From: * Thomas S. Knutsen la3...@gmail.com *Date: *Thu, 21 Jun 2012 01:17:02 +0200 *To: *li...@lazygranch.com; Discussion of precise time and frequency measurementtime-nuts@febo.com *Subject: *Re: [time-nuts] 10 MHz low pass filter Based on that PCB, I want to see an sweep to at least 1GHz. The reason is that experience have shown that the inductance (perhaps 10nH) in series with C2 and C6 would damage the stop-band rejection at UHF. Used with an OXCO this would not matter, but the desire to make the ultimate filter is still there. Thomas. 2012/6/21 li...@lazygranch.com If the output is buffered, there really shouldn't be a problem. Incidentally, I can crank out high order LCR filters all day just by transforming prototypes out of Zverev. But it has been my experience at even 10MHz the parasitics of the elements will throw off the design. -Original Message- From: Bob Camp li...@rtty.us Sender: time-nuts-boun...@febo.com Date: Wed, 20 Jun 2012 17:49:37 To: Discussion of precise time and frequency measurement time-nuts@febo.com Reply-To: Discussion of precise time and frequency measurement time-nuts@febo.com Subject: Re: [time-nuts] 10 MHz low pass filter Hi That's a pretty high order filter. The output of most OCXO's already has a filter on it. Combining two filters (especially high order ones) without isolation between them is not a good idea. The resulting transfer function will not be what you expect it to be Bob On Jun 20, 2012, at 4:54 PM, Joseph