Re: [time-nuts] Datachron 3070
Hi 10 MHz at roughly 10 dbm is a pretty good bet. That’s *if* it uses an external reference and not just something like IRIG. It’s not really clear that they all do have external reference capability (despite the jack). Bob On Sep 5, 2014, at 1:00 AM, Bob Bownes wrote: > Has anyone got a manual for one of these by chance? > > I'd like to feed in an external oscillator but I'd like to know the frequency > and amplitude before I go plugging it in at random. > > Thanks! > Bob > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] Datachron 3070
Has anyone got a manual for one of these by chance? I'd like to feed in an external oscillator but I'd like to know the frequency and amplitude before I go plugging it in at random. Thanks! Bob ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] DataChron 3070 Question
I've seen units that do the switch electronically. If there's energy at the external input, the internal source is switched off. Bill Hawkins -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mitchell Janoff Sent: Sunday, March 18, 2007 3:51 PM To: time-nuts@febo.com Subject: [time-nuts] DataChron 3070 Question I have a DataChron 3070 Time-code Generator that I want to use as a time display and time-code generator. It has an external frequency input, but I can't find any switch that would allow me to turn off the internal oscillator and use an external supplied frequency. It has switches on the front panel to switch between an internal time-code and an external time-code, but no switch for the frequency standard. I've tried locating a jumper or switch inside, but there are boards on top of boards and I don't want to start taking it apart unless I know that there is a switch or a jumper on the bottom. Anyone have a manual or one of these units? Thanks for your help. ___ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts ___ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
[time-nuts] DataChron 3070 Question
I have a DataChron 3070 Time-code Generator that I want to use as a time display and time-code generator. It has an external frequency input, but I can't find any switch that would allow me to turn off the internal oscillator and use an external supplied frequency. It has switches on the front panel to switch between an internal time-code and an external time-code, but no switch for the frequency standard. I've tried locating a jumper or switch inside, but there are boards on top of boards and I don't want to start taking it apart unless I know that there is a switch or a jumper on the bottom. Anyone have a manual or one of these units? Thanks for your help. ___ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts