Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Bob, No parts list except this one which you can use to get started : http://n4iqt.com/BillRiley/DMTDMixerModulePartsList.xls Spreadsheet file or down load the free PCB express software and generate a parts list with them and files here : http://n4iqt.com/BillRiley/MixerModule_7.sch http://n4iqt.com/BillRiley/DDSModule.sch DDS board has the option for 4 distribution amps only 2 are used normally. PICTIC II board is used without the op amps and 7.5 volt regulator notes: http://n4iqt.com/BillRiley/No-interpolator.txt page 3 of this file has full parts list http://n4iqt.com/picticii/circuit-pcb.pdf If you install the interpolator it can be turned off with a software command. R25 a 10 K resistor only used with the TTL computer interface option, not used with the RS232 chip, is listed twice as 1% or 5% either will work but you don't need both. Stanley - Original Message From: Robert Darlington To: Discussion of precise time and frequency measurement Sent: Tue, September 7, 2010 5:16:46 PM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here ! Cool. Is there a parts list? I definitely want to build one. Looks like a really interesting project and a great opportunity for me to learn. I've been meaning to tinker with those AD DDS chips for a while. I have a dev kit for one of the models around here somewhere that I picked up for an ultrasound focusing project (sound radiation pressure was used to push blood cells to the center of a capillary tube) but all I really did was layout. No software for me on that one. -Bob On Tue, Sep 7, 2010 at 11:40 AM, Stanley Reynolds < stanley_reyno...@yahoo.com> wrote: > Yes this file: > > http://www.n4iqt.com/BillRiley/A-Small-DMTD-System.pdf > > Stanley > > > > - Original Message > From: Robert Darlington > To: Discussion of precise time and frequency measurement < > time-nuts@febo.com> > Sent: Tue, September 7, 2010 11:54:56 AM > Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards > are > here ! > > Hi Stanley, > > I'm very interested in building this project. Do you have documentation > online? I'd like to read through it then send you the $47 for the boards. > > Thanks, > Bob > > On Sat, Sep 4, 2010 at 1:28 PM, Stanley Reynolds < > stanley_reyno...@yahoo.com > > wrote: > > > Packing them up to take to the PO. > > Paypal to stanley_reyno...@yahoo.com > > $9.50 per board $47.50 for the set of 5. > > If you mail your payment to: > > Stanley Reynolds > > 225 Alpine Street > > Birmingham, AL 35210 > > then $9 per board $45 for the set of 5. > > Yes I have plenty of extra boards. > > > > Notice arrow has a good price on the DDS chip. > > I have no plans to provide parts except if someone is unable to complete > > the > > project otherwise. > > > > Stanley > > > > ___ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Cool. Is there a parts list? I definitely want to build one. Looks like a really interesting project and a great opportunity for me to learn. I've been meaning to tinker with those AD DDS chips for a while. I have a dev kit for one of the models around here somewhere that I picked up for an ultrasound focusing project (sound radiation pressure was used to push blood cells to the center of a capillary tube) but all I really did was layout. No software for me on that one. -Bob On Tue, Sep 7, 2010 at 11:40 AM, Stanley Reynolds < stanley_reyno...@yahoo.com> wrote: > Yes this file: > > http://www.n4iqt.com/BillRiley/A-Small-DMTD-System.pdf > > Stanley > > > > - Original Message > From: Robert Darlington > To: Discussion of precise time and frequency measurement < > time-nuts@febo.com> > Sent: Tue, September 7, 2010 11:54:56 AM > Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards > are > here ! > > Hi Stanley, > > I'm very interested in building this project. Do you have documentation > online? I'd like to read through it then send you the $47 for the boards. > > Thanks, > Bob > > On Sat, Sep 4, 2010 at 1:28 PM, Stanley Reynolds < > stanley_reyno...@yahoo.com > > wrote: > > > Packing them up to take to the PO. > > Paypal to stanley_reyno...@yahoo.com > > $9.50 per board $47.50 for the set of 5. > > If you mail your payment to: > > Stanley Reynolds > > 225 Alpine Street > > Birmingham, AL 35210 > > then $9 per board $45 for the set of 5. > > Yes I have plenty of extra boards. > > > > Notice arrow has a good price on the DDS chip. > > I have no plans to provide parts except if someone is unable to complete > > the > > project otherwise. > > > > Stanley > > > > ___ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Yes this file: http://www.n4iqt.com/BillRiley/A-Small-DMTD-System.pdf Stanley - Original Message From: Robert Darlington To: Discussion of precise time and frequency measurement Sent: Tue, September 7, 2010 11:54:56 AM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here ! Hi Stanley, I'm very interested in building this project. Do you have documentation online? I'd like to read through it then send you the $47 for the boards. Thanks, Bob On Sat, Sep 4, 2010 at 1:28 PM, Stanley Reynolds wrote: > Packing them up to take to the PO. > Paypal to stanley_reyno...@yahoo.com > $9.50 per board $47.50 for the set of 5. > If you mail your payment to: > Stanley Reynolds > 225 Alpine Street > Birmingham, AL 35210 > then $9 per board $45 for the set of 5. > Yes I have plenty of extra boards. > > Notice arrow has a good price on the DDS chip. > I have no plans to provide parts except if someone is unable to complete > the > project otherwise. > > Stanley > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Hi Stanley, I'm very interested in building this project. Do you have documentation online? I'd like to read through it then send you the $47 for the boards. Thanks, Bob On Sat, Sep 4, 2010 at 1:28 PM, Stanley Reynolds wrote: > Packing them up to take to the PO. > Paypal to stanley_reyno...@yahoo.com > $9.50 per board $47.50 for the set of 5. > If you mail your payment to: > Stanley Reynolds > 225 Alpine Street > Birmingham, AL 35210 > then $9 per board $45 for the set of 5. > Yes I have plenty of extra boards. > > Notice arrow has a good price on the DDS chip. > I have no plans to provide parts except if someone is unable to complete > the > project otherwise. > > Stanley > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Brice I don't receive all the messages from the list but check the archives. I have the boards and extras so busy packing / shipping. Just checked paypal and did not see your payment. If you have sent it do not worry I will figure it out. I use a spread sheet to match up names, nick names, paypal ids, and email address. Stanley - Original Message From: Heathkid To: Discussion of precise time and frequency measurement Sent: Mon, September 6, 2010 11:14:18 PM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here ! Stanley, Did I already send you payment for the "expanded" version? I'm still not getting any emails from you except from the list. What's the status of the "Small DMTD Project"? There hasn't been a word about it for a *long* time. 73 Brice KA8MAV - Original Message - From: "Stanley Reynolds" To: Sent: Saturday, September 04, 2010 3:28 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Update,boards are here ! > Packing them up to take to the PO. > Paypal to stanley_reyno...@yahoo.com > $9.50 per board $47.50 for the set of 5. > If you mail your payment to: > Stanley Reynolds > 225 Alpine Street > Birmingham, AL 35210 > then $9 per board $45 for the set of 5. > Yes I have plenty of extra boards. > > Notice arrow has a good price on the DDS chip. > I have no plans to provide parts except if someone is unable to complete the > project otherwise. > > Stanley > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Stanley, Did I already send you payment for the "expanded" version? I'm still not getting any emails from you except from the list. What's the status of the "Small DMTD Project"? There hasn't been a word about it for a *long* time. 73 Brice KA8MAV - Original Message - From: "Stanley Reynolds" To: Sent: Saturday, September 04, 2010 3:28 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Update,boards are here ! Packing them up to take to the PO. Paypal to stanley_reyno...@yahoo.com $9.50 per board $47.50 for the set of 5. If you mail your payment to: Stanley Reynolds 225 Alpine Street Birmingham, AL 35210 then $9 per board $45 for the set of 5. Yes I have plenty of extra boards. Notice arrow has a good price on the DDS chip. I have no plans to provide parts except if someone is unable to complete the project otherwise. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Packing them up to take to the PO. Paypal to stanley_reyno...@yahoo.com $9.50 per board $47.50 for the set of 5. If you mail your payment to: Stanley Reynolds 225 Alpine Street Birmingham, AL 35210 then $9 per board $45 for the set of 5. Yes I have plenty of extra boards. Notice arrow has a good price on the DDS chip. I have no plans to provide parts except if someone is unable to complete the project otherwise. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
