Morris,
Are you getting "real" responses, or is the VP just reporting its current
settings? If it receives a message it does not recognize due to formatting
errors it will just report what its current settings are instead of acting
on the command. I'm not sure what would happen if it got a series of
commands like this.
Message timing - this has tripped up many users. On power up (or after a
reset) make sure you wait at least 5-10 seconds before sending any commands.
If messages are received before the processor has finished booting, all
sorts of bad things can happen (ask me how I know) Normally the receiver
will just ignore them, but if the timing is JUST RIGHT you can trash the
serial port.
Randy
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Morris Odell
Sent: Friday, February 29, 2008 3:03 PM
To: time-nuts@febo.com
Subject: [time-nuts] VP oncore problem
Hi all,
I wonder if anyone can help me with a problem I'm having with a VP Oncore
receiver
I am building something which includes one of these receivers and it
communicates with the host microcontroller via the VP's serial binary link.
The host receives messages from the VP just fine. The problem arises when
the host tries to send configuration commands to the VP. When this happens
the VP only responds to the first of 4 messages (Total: about 40 bytes). It
doesn't matter what order they are sent in a continuous string or whether or
not there are time delays up to 5 seconds or dummy characters between them,
the VP only acknowledges the first one and is deaf to any more. Once the
system is restarted it will receive one more message before going deaf
again.
The VP manual says the serial receive buffer will store up to 2048
characters and act on them sequentially. This is obviously not happening. Am
I missing something here?
TIA
Morris
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.