Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde & Schwarz
If it is not archived for later viewing, it would be great if someone who recorded it would make it available for us nuts. Joe Gray W5JG On Oct 3, 2013 2:36 PM, "Mike Feher" wrote: > I use "antbar", which is free, to save video files. Regards - Mike > > Mike B. Feher, EOZ Inc. > 89 Arnold Blvd. > Howell, NJ, 07731 > 732-886-5960 office > 908-902-3831 cell > > -Original Message- > From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On > Behalf Of Dr. David Kirkby > Sent: Thursday, October 03, 2013 4:22 PM > To: Electronics and Books; Discussion of precise time and frequency > measurement > Subject: Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by > Rohde > & Schwarz > > I suspect there is software which will just capture whatever is on the > screen. Perhaps Google will find something. > > It would seem a bit dumb for R+S to produce this, let 30 or so people look > at it, then not make it available to anyone else. That works out a lot of > money per person looking!! > > I've never found the R+S site too useful for support, which is why I tend > to > buy HP/Agilent and not R+S stuff. But maybe one could find out from R+S if > they intend to archive it. > > Dave > > > > On 3 October 2013 20:11, Electronics and Books > wrote: > > I have tested the seminar this evening. Its a series of flash files with > a > size of 20 - 50k. They can be saved in a hurry. I could not find a audio > file, its also one of the flash files. At the end all files are gone. Its > not very practical to save it. > > > > > > > > > > > > > > ________________ > > From: Dr. David Kirkby > > To: Discussion of precise time and frequency measurement > > > > Sent: Thursday, October 3, 2013 9:35 AM > > Subject: Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by > Rohde& Schwarz > > > > > > On 3 October 2013 02:26, Joseph Gray wrote: > >> I won't be available when this is live. Do you know if the video will > >> be available afterwards? > >> > >> Joe Gray > >> W5JG > > > > Sorry, I don't know. You could ask either R+S or MW&RF. I know Agilent > > archive their webinars, but I've never seen one from R+S or WR&RF > > before, so I don't know if it will be archived. > > > > Typically these sort of things require one to enter a user name and > > password to view, so it is not something you can record on your own > > computer easily - if at all. It might be possible for someone else to > > record it. I must admit I don't know what software one could use to do > > it, but I suspect it must be technically, (though perhaps not > > legally), possible to record it. > > > > > > Dave > > ___ > > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > ___ > > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > ___ > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde & Schwarz
I use "antbar", which is free, to save video files. Regards - Mike Mike B. Feher, EOZ Inc. 89 Arnold Blvd. Howell, NJ, 07731 732-886-5960 office 908-902-3831 cell -Original Message- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Dr. David Kirkby Sent: Thursday, October 03, 2013 4:22 PM To: Electronics and Books; Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde & Schwarz I suspect there is software which will just capture whatever is on the screen. Perhaps Google will find something. It would seem a bit dumb for R+S to produce this, let 30 or so people look at it, then not make it available to anyone else. That works out a lot of money per person looking!! I've never found the R+S site too useful for support, which is why I tend to buy HP/Agilent and not R+S stuff. But maybe one could find out from R+S if they intend to archive it. Dave On 3 October 2013 20:11, Electronics and Books wrote: > I have tested the seminar this evening. Its a series of flash files with a size of 20 - 50k. They can be saved in a hurry. I could not find a audio file, its also one of the flash files. At the end all files are gone. Its not very practical to save it. > > > > > > > > From: Dr. David Kirkby > To: Discussion of precise time and frequency measurement > > Sent: Thursday, October 3, 2013 9:35 AM > Subject: Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde& Schwarz > > > On 3 October 2013 02:26, Joseph Gray wrote: >> I won't be available when this is live. Do you know if the video will >> be available afterwards? >> >> Joe Gray >> W5JG > > Sorry, I don't know. You could ask either R+S or MW&RF. I know Agilent > archive their webinars, but I've never seen one from R+S or WR&RF > before, so I don't know if it will be archived. > > Typically these sort of things require one to enter a user name and > password to view, so it is not something you can record on your own > computer easily - if at all. It might be possible for someone else to > record it. I must admit I don't know what software one could use to do > it, but I suspect it must be technically, (though perhaps not > legally), possible to record it. > > > Dave > ___ > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde & Schwarz
I suspect there is software which will just capture whatever is on the screen. Perhaps Google will find something. It would seem a bit dumb for R+S to produce this, let 30 or so people look at it, then not make it available to anyone else. That works out a lot of money per person looking!! I've never found the R+S site too useful for support, which is why I tend to buy HP/Agilent and not R+S stuff. But maybe one could find out from R+S if they intend to archive it. Dave On 3 October 2013 20:11, Electronics and Books wrote: > I have tested the seminar this evening. Its a series of flash files with a > size of 20 - 50k. They can be saved in a hurry. I could not find a audio > file, its also one of the flash files. At the end all files are gone. Its not > very practical to save it. > > > > > > > > From: Dr. David Kirkby > To: Discussion of precise time and frequency measurement > Sent: Thursday, October 3, 2013 9:35 AM > Subject: Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde > & Schwarz > > > On 3 October 2013 02:26, Joseph Gray wrote: >> I won't be available when this is live. Do you know if the video will be >> available afterwards? >> >> Joe Gray >> W5JG > > Sorry, I don't know. You could ask either R+S or MW&RF. I know Agilent > archive their webinars, but I've never seen one from R+S or WR&RF > before, so I don't know if it will be archived. > > Typically these sort of things require one to enter a user name and > password to view, so it is not something you can record on your own > computer easily - if at all. It might be possible for someone else to > record it. I must admit I don't know what software one could use to do > it, but I suspect it must be technically, (though perhaps not > legally), possible to record it. > > > Dave > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde & Schwarz
I have tested the seminar this evening. Its a series of flash files with a size of 20 - 50k. They can be saved in a hurry. I could not find a audio file, its also one of the flash files. At the end all files are gone. Its not very practical to save it. From: Dr. David Kirkby To: Discussion of precise time and frequency measurement Sent: Thursday, October 3, 2013 9:35 AM Subject: Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde & Schwarz On 3 October 2013 02:26, Joseph Gray wrote: > I won't be available when this is live. Do you know if the video will be > available afterwards? > > Joe Gray > W5JG Sorry, I don't know. You could ask either R+S or MW&RF. I know Agilent archive their webinars, but I've never seen one from R+S or WR&RF before, so I don't know if it will be archived. Typically these sort of things require one to enter a user name and password to view, so it is not something you can record on your own computer easily - if at all. It might be possible for someone else to record it. I must admit I don't know what software one could use to do it, but I suspect it must be technically, (though perhaps not legally), possible to record it. Dave ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde & Schwarz
On 3 October 2013 02:26, Joseph Gray wrote: > I won't be available when this is live. Do you know if the video will be > available afterwards? > > Joe Gray > W5JG Sorry, I don't know. You could ask either R+S or MW&RF. I know Agilent archive their webinars, but I've never seen one from R+S or WR&RF before, so I don't know if it will be archived. Typically these sort of things require one to enter a user name and password to view, so it is not something you can record on your own computer easily - if at all. It might be possible for someone else to record it. I must admit I don't know what software one could use to do it, but I suspect it must be technically, (though perhaps not legally), possible to record it. Dave ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde & Schwarz
I won't be available when this is live. Do you know if the video will be available afterwards? Joe Gray W5JG On Wed, Oct 2, 2013 at 9:26 AM, Dr. David Kirkby wrote: > I got sent an email about a Webinar, which is free (I like that!!!) on > next Wednesday (Oct 9th). > > http://mwrf.com/webinar/webcast-phase-noise-jitter-measurements > > I'm not sure how useful it will be, but might be worth a look. > > Dave > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde & Schwarz
I got sent an email about a Webinar, which is free (I like that!!!) on next Wednesday (Oct 9th). http://mwrf.com/webinar/webcast-phase-noise-jitter-measurements I'm not sure how useful it will be, but might be worth a look. Dave ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.