Hi  Bob, and Achim . thanks for the comments. I've change the subject line to fit more in line we the morphed discussion.

Good discussion, and like Bob said, there will be lots of common mode on the GPSs. The diurnal GPS derived clock errors due to the ionosphere are well described .   Bob thats a good point about picking and choosing, and long term effects.

My initial obs on two devices, tell me there IS  significant non-correlated noise between two of them, but this is on low cost GPS  and also I have not yet established how much noise is purely my edge point sampling errors and nothing to do with the actual device, and the two in question have different views of the sky....

Acbom, you have clearly thought about this. As for the IDELAYS etc, IDELAYS yes have been used for this sort of thing since the mid 90s.  Enough of them and enough inputs and some known waveform to compensate against, and some differential means,  should be enough to mitigate the temperature/process effects. If rising and falling edges are worked, delay will affect both and compensate. While 1pps source might usually be only accurate on one edge, nothing an external ECL / GaAs flip flop won't fix to provide 1/2 pps.

One can also use PCB delay...150ps per inch... being careful of FR4 weave , zig zags etc.....although once the rise time of the signal gets amongst the delay we want, thats uncertainty.

**** ***
Assuming we end up with a single, nice clean compensated and as good as possible timebase (from 1pps etc) (sounds like your territory, Bob), and With multiple OCXO ( ALL being simultaneously inter-dependently disclipined ) , there may be the opportunity to try different parameters (or even algorithms) on the different OCXOs and pick the one with the minimum squared error (or something like that) . What might kill that is that the OCXOs vary quite alot even on the same model.

The goal of this is

a) to learn something- precision instrumentation is hard.

b) have a 1e-13 accurate long term (weeks on) frequency reference

c) have short term 1000 second stability <= 1e-12

****

glen




On 7/07/2019 6:56 PM, Achim Gratz wrote:
Glen English VK1XX writes:



_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to 
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.

Reply via email to