Re: [SlimDevices: Touch] Touch remote control
edwin2006 wrote: > Thnx for sharing. Picture and or link of products used would be great! https://www.amazon.com/Goo-Gone-Original-Liquid-Adhesive/dp/B6IBNJ https://www.amazon.com/Soft-Scrub-Purpose-Kitchen-Cleanser/dp/B000RPXSDY/ref=sxts_sxwds-bia-wc-rsf1_0?cv_ct_cx=soft+scrub=1=soft+scrub_rd_i=B000RPXSDY_rd_r=56595e3b-f65a-4c17-8a6c-ab55aef5431c_rd_w=f7uhc_rd_wg=v7Zka_rd_p=5168df84-062d-4bdf-8a6e-2680813bd42f_rd_r=TK36BY2DN3X4PB3YXSJ7=1=1617338692=1-1-7bf78e84-8ef2-4f13-9926-bee5153e81cb I used a lot of elbow grease with the soft scrub and the goo gone might not have even been necessary. It didn't seem to do too much but the surface kept getting nicer the more i scrubbed it with soft scrub. You don't want it too wet when initially using the soft scrub. It seems to be more effective when the soft scrub is not watered down. I used a toothbrush to scrub it. pongagt's Profile: http://forums.slimdevices.com/member.php?userid=50574 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
pongagt wrote: > I know this is a antique thread and device but the Touch may become more > popular with the new CORE32 LMS that you can pre-order. I have two > Touches and the remotes were in terrible condition. I initially cleaned > them with Goo Gone and that did a decent job and did not remove the > lettering. I saw the post about using bathroom cleaner and i remembered > i had some Soft Scrub so i figured i would try that. All i can say is > working with that for a little while and then checking it and then > getting the spots i missed it came out like new with the lettering > intact. No stickiness at all and the surface looks perfect. I will just > leave it like that and see how it goes to determine weather or not i > should try and clear coat it. For now the remotes are perfect. One of > these days i may work on my Boom which also has the condition.Thnx for > sharing. Picture and or link of products used would be great! *SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio (Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch (Study 2), few spare unit's *Server:* LMS on Pi3 7.9.1. on PcP 3.21 *Network:* AVM Fritzbox, Netgear Smart Switch 24p, 3x Ubiquity edwin2006's Profile: http://forums.slimdevices.com/member.php?userid=66926 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
I know this is a antique thread and device but the Touch may become more popular with the new CORE32 LMS that you can pre-order. I have two Touches and the remotes were in terrible condition. I initially cleaned them with Goo Gone and that did a decent job and did not remove the lettering. I saw the post about using bathroom cleaner and i remembered i had some Soft Scrub so i figured i would try that. All i can say it working with that for a little while and then checking it and then getting the spots i missed it came out like new with the lettering intact. No stickiness at all and the surface looks perfect. I will just leave it like that and see how it goes to determine weather or not i should try and clear coat it. For now the remotes are perfect. One of these days i may work on my Boom which also has the condition. pongagt's Profile: http://forums.slimdevices.com/member.php?userid=50574 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
When my remote became unpleasantly sticky I opened up the unit and treated the top part with silicone remover (the stuff you use in bathrooms etc). Paint it on and leave overnight. It took a few applications, but exposed the shiny plastic surface underneath and did not remove the lettering. cbee's Profile: http://forums.slimdevices.com/member.php?userid=67517 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
kidstypike wrote: > The top part is a piece of hard plastic with a coating that becomes > sticky over time, I cleaned mine with my wife's nail varnish remover, > trouble is it cleaned all the lettering off too :eek:. > > Not to worry, it feels 100 times better and I only use it for it's > volume control these days. > > I inserted a fairly slim (not sharp) knife blade under the join at the > top right corner (me being left-handed), and prised it gently up. Once > you get it started, you'll know what to do, there are 8 lugs on the main > bottom piece (4 each side) that need pulling outwards from the top > piece, easy once you get going if you get one side free, the top plate > should just pull off. > > The "buttons" are a single piece of moulded floppy rubber and just lie > on top of the PCB. > > Good luck. > > 23076 Just found this helpful tip. Worked a treat. I used Isoclean (Isopropanol Cleaning Fluid). Remote now as good as new. Thanks. mikeos's Profile: http://forums.slimdevices.com/member.php?userid=52438 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
thanks for showing the mounting point's. This really helped to dismantling the remote. *SqueezeBoxes:* 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch (Bedroom) *Server:* LMS1 7.7.3 on windows, LMS2 7.9.1. on PcP 3.20 *Network:* AVM Fritzbox, D-Link Smart Switch 24p, 3x Ubiquity edwin2006's Profile: http://forums.slimdevices.com/member.php?userid=66926 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
Try the Squeezer app on an Android Smartphone or one of several apps available for phones, Android, iPhone and Windows Applegarth's Profile: http://forums.slimdevices.com/member.php?userid=48344 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
Jeff07971 wrote: > The "sticky stuff" is soft touch rubbery paint which degrades, once gone > it should remain gone. Good news! Thanks for that. anotherbob's Profile: http://forums.slimdevices.com/member.php?userid=51459 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
anotherbob wrote: > Task now completed. > Not wishing to erase the lettering I tried a range of cleaning options. > I finished up with Tesco's own brand "Everyday Value" cream cleaner, and > one of those washing up sponges with a friction pad on one side (very > hi-tech). > It took ages of rubbing before all the sticky stuff was gone and I'm > wondering if there is a way of preventing the same gunge appearing again > in time. The "sticky stuff" is soft touch rubbery paint which degrades, once gone it should remain gone. *Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezePlayer,PiCorePlayer x3,Wandboard *Server:* LMS Version: 7.9.0 - 1475786002 on Centos 7 VM on ESXi 6 on Dell T320 *Plugins:* AutoRescan/BBCiPlayer/PowerSave/PowerSwitchIII/Squeezecloud *Remotes:* iPeng8/Orangesqueeze/PC/Jivelite *Music:* 383GB,1269 albums 17756 songs 4381 artists mostly FLACs *Want a webapp ?* See http://forums.slimdevices.com/showthread.php?104305-Webapp-for-LMS Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
anotherbob wrote: > Many thanks. This is my task for tomorrow. (except the nail varnish > remover) Task now completed. Not wishing to erase the lettering I tried a range of cleaning options. I finished up with Tesco's own brand "Everyday Value" cream cleaner, and one of those washing up sponges with a friction pad on one side (very hi-tech). It took ages of rubbing before all the sticky stuff was gone and I'm wondering if there is a way of preventing the same gunge appearing again in time. anotherbob's Profile: http://forums.slimdevices.com/member.php?userid=51459 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
kidstypike wrote: > The top part is a piece of hard plastic with a coating that becomes > sticky over time, I cleaned mine with my wife's nail varnish remover, > trouble is it cleaned all the lettering off too :eek:. > > Not to worry, it feels 100 times better and I only use it for it's > volume control these days. > > I inserted a fairly slim (not sharp) knife blade under the join at the > top right corner (me being left-handed), and prised it gently up. Once > you get it started, you'll know what to do, there are 8 lugs on the main > bottom piece (4 each side) that need pulling outwards from the top > piece, easy once you get going if you get one side free, the top plate > should just pull off. > > The "buttons" are a single piece of moulded floppy rubber and just lie > on top of the PCB. > > Good luck. Many thanks. This is my task for tomorrow. (except the nail varnish remover) anotherbob's Profile: http://forums.slimdevices.com/member.php?userid=51459 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
I can't find my remotes, they must be exceptionally clean.. -Transcoded from Matt's brain by Tapatalk- -- Hardware: 3x Touch, 1x Radio, 2x Receivers, 1 HP Microserver NAS with Debian+LMS 7.9.0 Music: ~1300 CDs, as 450 GB of 16/44k FLACs. No less than 3x 24/44k albums.. drmatt's Profile: http://forums.slimdevices.com/member.php?userid=59498 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
If you understand German you could look at this http://www.squeezebox-forum.de/viewtopic.php?t=3338 *SqueezeBoxes:* 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room) *Server:* LMS 7.9.1 on windows *Network:* AVM Fritzbox, D-Link Smart Switch 24p, 3x Ubiquity edwin2006's Profile: http://forums.slimdevices.com/member.php?userid=66926 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control
anotherbob wrote: > After some years of use the keypad of the remote control of my TOUCH has > acquired a "sticky" coating. Is there a way of dismantling the unit so i > could clean it without getting any cleaning fluid on the vital bits > inside? The top part is a piece of hard plastic with a coating that becomes sticky over time, I cleaned mine with my wife's nail varnish remover, trouble is it cleaned all the lettering off too :eek:. Not to worry, it feels 100 times better and I only use it for it's volume control these days. I inserted a fairly slim (not sharp) knife blade under the join at the top right corner (me being left-handed), and prised it gently up. Once you get it started, you'll know what to do, there are 8 lugs on the main bottom piece (4 each side) that need pulling outwards from the top piece, easy once you get going if you get one side free, the top plate should just pull off. The "buttons" are a single piece of moulded floppy rubber and just lie on top of the PCB. Good luck.23076 +---+ |Filename: Touch remote.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=23076| +---+ LMS 7.9 on a Raspberry Pi 3/piCorePlayer 3.20, playlists and LMS cache on a USB stick, 25K+ music library on a WD MyCloud network drive, Rasberry Pi 2/piCorePlayer 3.02 > HiFiBerry DIGI+ > AudioEngine DAC1 > AVI DM5 Raspberry Pi 3/piCorePlayer 3.20beta7/HiFiBerry DAC+ > Cambridge Audio Minx 5 (study) Rasberry Pi 2/piCorePlayer 3.02 > HiFiBerry DAC+ > Sharp micro system (garage) 1 x Boom (dining room) - 1 x Touch (used for display and controller only) - 1 x SB3 (spare) - 1 x Radio (spare) kidstypike's Profile: http://forums.slimdevices.com/member.php?userid=10436 View this thread: http://forums.slimdevices.com/showthread.php?t=107639 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control issue
The problem was solved by restoring the factory default settings. -- jfo jfo's Profile: http://forums.slimdevices.com/member.php?userid=1135 View this thread: http://forums.slimdevices.com/showthread.php?t=91059 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
For some reason, my Pronto NG refused to learn the IR codes from the SB Touch handset. By going through the info in this thread, and doing a bit of hex / binary conversion, I think I've figured out the full list of clean pronto IR codes for the SB touch: 900B 006D 0001 6E91 19E6 0 900B 006D 0001 6E91 0FF0 1 900B 006D 0001 6E91 10EF 2 900B 006D 0001 6E91 11EE 3 900B 006D 0001 6E91 12ED 4 900B 006D 0001 6E91 13EC 5 900B 006D 0001 6E91 14EB 6 900B 006D 0001 6E91 15EA 7 900B 006D 0001 6E91 16E9 8 900B 006D 0001 6E91 17E8 9 900B 006D 0001 6E91 06F9 Add 900B 006D 0001 6E91 0DF2 Arrow down 900B 006D 0001 6E91 09F6 Arrow left 900B 006D 0001 6E91 0BF4 Arrow right 900B 006D 0001 6E91 07F8 Arrow up 900B 006D 0001 6E91 20DF Brightness 900B 006D 0001 6E91 0EF1 Browse 900B 006D 0001 6E91 18E7 Favorites 900B 006D 0001 6E91 05FA Fwd 900B 006D 0001 6E91 44BB Home 900B 006D 0001 6E91 1EE1 Now Playing 900B 006D 0001 6E91 04FB Pause 900B 006D 0001 6E91 08F7 Play 900B 006D 0001 6E91 02FD Power 900B 006D 0001 6E91 1CE3 Repeat 900B 006D 0001 6E91 03FC Rew 900B 006D 0001 6E91 1AE5 Search 900B 006D 0001 6E91 1BE4 Shuffle 900B 006D 0001 6E91 1DE2 Sleep 900B 006D 0001 6E91 01FE Volume up 900B 006D 0001 6E91 00FF Volume down 900B 006D 0001 6E91 23DC Mute 900B 006D 0001 6E91 F10E Power on 900B 006D 0001 6E91 E11E Power off Hope this is helpful, I could not find this info anywhere, and like others, I found that my SB3 codes did not work with the touch. Enjoy! -- indypants indypants's Profile: http://forums.slimdevices.com/member.php?userid=11608 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
@Seven: Thanks for the spreadsheet - that was very helpful! I cut-n-pasted all of the codes into ProntoEdit and they work. (Well, most of them: the code for '1' is actually '0', the one for '2' is '1', the one for '3' is '2'. I had the Pronto learn the code for '3' and now I have a full set.) You offered (to someone else?) an explanation of how you went from the SB Touch keycodes to those large strings: I'd like to understand the process. My SliMP3, Squeezebox 2, SB Boom and SB Touch now all use the same IR codes, _including_ the 'keys' that are not even on the remotes, but that I happened to use all the time (especially the discrete codes for pwr_on and pwr_off). With time, I'll post the CCF file to remotecentral.com, so anyone struggling with the same problem won't have to cut-n-paste all those codes. Thanks again, Seven! Adriaan -- Adriaan Adriaan's Profile: http://forums.slimdevices.com/member.php?userid=41823 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
@Peterw: Rather than rearranging everything in my Pronto, I tried the make the SB Touch understand the JVC codes by editing irMap_default like you suggested. I can confirm that it does not work. Regards, Adriaan -- Adriaan Adriaan's Profile: http://forums.slimdevices.com/member.php?userid=41823 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch remote control lettered jumps diff to SB3
Yeah..I noticed similar with my Touch too Peter. Was a handy feature on the SB3 for sure. -- Gazjam Gazjam's Profile: http://forums.slimdevices.com/member.php?userid=18604 View this thread: http://forums.slimdevices.com/showthread.php?t=79045 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
I looked at the .ccf-file on remotecentral (the one from February 2004), deduced the hex format from that and tried it with the discrete codes listed in this thread. They seem to work fine on the Touch with my URC MX-900 (using the hex editor). So if it helps anyone, here they are: discrete on (0x7689*8f70*) Code: 006d 0022 0155 00ab 0015 0016 0015 0040 0015 0040 0015 0040 0015 0016 0015 0040 0015 0040 0015 0016 0015 0040 0015 0016 0015 0016 0015 0016 0015 0040 0015 0016 0015 0016 0015 0040 0015 0040 0015 0016 0015 0016 0015 0016 0015 0040 0015 0040 0015 0040 0015 0040 0015 0016 0015 0040 0015 0040 0015 0040 0015 0016 0015 0016 0015 0016 0015 0016 0015 05f4 discrete off (0x7689*8778*) Code: 006d 0022 0155 00ab 0015 0016 0015 0040 0015 0040 0015 0040 0015 0016 0015 0040 0015 0040 0015 0016 0015 0040 0015 0016 0015 0016 0015 0016 0015 0040 0015 0016 0015 0016 0015 0040 0015 0040 0015 0016 0015 0016 0015 0016 0015 0016 0015 0040 0015 0040 0015 0040 0015 0016 0015 0040 0015 0040 0015 0040 0015 0040 0015 0016 0015 0016 0015 0016 0015 05f4 -- Seven Seven's Profile: http://forums.slimdevices.com/member.php?userid=35042 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
Hi there FYI - http://wiki.slimdevices.com/index.php/RemoteIRCodes Felix -- fcm4711 Focus means saying no. - Steve Jobs fcm4711's Profile: http://forums.slimdevices.com/member.php?userid=42 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
Seven;537970 Wrote: I looked at the .ccf-file on remotecentral (the one from February 2004), deduced the hex format from that and tried it with the discrete codes listed in this thread. They seem to work fine on the Touch with my URC MX-900 (using the hex editor). Seven - these both seem to be the same - can I ask you what you deduced as the format, I would liek to add some more discrete ones... -- ziggyb63 ziggyb63's Profile: http://forums.slimdevices.com/member.php?userid=11682 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
peterw;536373 Wrote: The codes are in the Slim_Devices_Remote.ir file on your SBS server, e.g. discrete power on is Code: power_on= 76898f70 I don't know how exactly you'd translate those for Pronto, but if you can learn the power toggle code (0x7689*40bf*), hopefully it's pretty obvious how you'd encode discrete on (0x7689*8f70*) or discrete off (0x7689*8778*). Can someone help me with what these codes are called? I'm hoping to find a converter to change the the above codes to hex if possible. Thanks, -- DeWayne DeWayne's Profile: http://forums.slimdevices.com/member.php?userid=4345 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
Still struggling with the remote codes, can't get them to work on my URC MX-950. Anyone with similar problems/solutions? -- paltomare paltomare's Profile: http://forums.slimdevices.com/member.php?userid=2062 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
paltomare;536725 Wrote: Still struggling with the remote codes, can't get them to work on my URC MX-950. Anyone with similar problems/solutions? I just tried a backward approach -- applying the ideas in 'this thread about Radio IR' (http://forums.slimdevices.com/showthread.php?t=69634) to update the /usr/share/jive/jive/irMap_default.lua file on my Touch so that it would be hard-coded to accept JVC codes instead of Slim (e.g. map arrow_down to the JVC code 0xf78b instead of the Slim code 0x7689b04f). I didn't have any luck, but I have a pre-release hardware build, I think at least two revisions older than the retail units. So you might have better luck. The basic idea is to SSH into Touch, cd to /usr/share/jive/jive and edit the irMap_default.lua file, changing the hex values. Once you do that, you'll need to reboot Touch for the changes to take effect (simply restarting the 'jive' user interface app does not suffice). If you're comfortable with Linux and vi, I'd suggest you try it. Save a copy of irMap_default.lua in case you have to revert, and give it a shot. I'm pretty skeptical -- I think it may be the case that the IR circuits on Touch have either been programmed to ignore JVC codes (which would make sense -- the Touch UI should be more responsive if the IR circuit doesn't bother it with every silly IR signal that comes its way), or perhaps are even physically incapable of recognizing both Squeezebox and JVC codes -- see 'this comment from Felix' (http://forums.slimdevices.com/showpost.php?p=518771postcount=5) which isn't entirely clear about whether the IR limitation discussed in *that* thread is an intrinsic hardware issue or design choice. -- peterw http://www.tux.org/~peterw/ Free plugins: 'AllQuiet' (http://www.tux.org/~peterw/slim/AllQuiet.html) 'Auto Dim/AutoDisplay' (http://www.tux.org/~peterw/slim/AutoDisplay.html) 'BlankSaver' (http://www.tux.org/~peterw/slim/BlankSaver.html) 'ContextMenu' (http://www.tux.org/~peterw/slim/ContextMenu.html) 'DenonSerial' (http://www.tux.org/~peterw/slim/DenonSerial.html) 'FuzzyTime' (http://www.tux.org/~peterw/slim/FuzzyTime.html) 'KidsPlay' (http://www.tux.org/~peterw/slim/KidsPlay.html) 'KitchenTimer' (http://www.tux.org/~peterw/slim/KitchenTimer.html) 'PlayLog' (http://www.tux.org/~peterw/slim/PlayLog.html) 'PowerCenter/BottleRocket' (http://www.tux.org/~peterw/slim/PowerCenter.html) 'SaverSwitcher' (http://www.tux.org/~peterw/slim/SaverSwitcher.html) 'SettingsManager' (http://www.tux.org/~peterw/slim/SettingsManager.html) 'SleepFade' (http://www.tux.org/~peterw/slim/SleepFade.html) 'StatusFirst' (http://www.tux.org/~peterw/slim/StatusFirst.html) 'SyncOptions' (http://www.tux.org/~peterw/slim/SyncOptions.html) 'VolumeLock' (http://www.tux.org/~peterw/slim/VolumeLock.html) peterw's Profile: http://forums.slimdevices.com/member.php?userid=2107 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
Thanks for your reply but that is way over my head. I had some luck having the universal remote learn the codes from the SD remote but not 100%. -- paltomare paltomare's Profile: http://forums.slimdevices.com/member.php?userid=2062 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
DeWayne;536334 Wrote: Just hooked up my touch. Like the OP said SB3 remote codes do not work with the touch. Slim and Logitech have put together another wonderful product! I think you must *not* be using SB3 codes. What kind of remote control is it, and how do you *know* it's sending Slim Devices codes? Have you disabled the jvc .ir codes for your SB3 and restarted SBS to verify your remote isn't sending JVC codes? -- peterw http://www.tux.org/~peterw/ Free plugins: 'AllQuiet' (http://www.tux.org/~peterw/slim/AllQuiet.html) 'Auto Dim/AutoDisplay' (http://www.tux.org/~peterw/slim/AutoDisplay.html) 'BlankSaver' (http://www.tux.org/~peterw/slim/BlankSaver.html) 'ContextMenu' (http://www.tux.org/~peterw/slim/ContextMenu.html) 'DenonSerial' (http://www.tux.org/~peterw/slim/DenonSerial.html) 'FuzzyTime' (http://www.tux.org/~peterw/slim/FuzzyTime.html) 'KidsPlay' (http://www.tux.org/~peterw/slim/KidsPlay.html) 'KitchenTimer' (http://www.tux.org/~peterw/slim/KitchenTimer.html) 'PlayLog' (http://www.tux.org/~peterw/slim/PlayLog.html) 'PowerCenter/BottleRocket' (http://www.tux.org/~peterw/slim/PowerCenter.html) 'SaverSwitcher' (http://www.tux.org/~peterw/slim/SaverSwitcher.html) 'SettingsManager' (http://www.tux.org/~peterw/slim/SettingsManager.html) 'SleepFade' (http://www.tux.org/~peterw/slim/SleepFade.html) 'StatusFirst' (http://www.tux.org/~peterw/slim/StatusFirst.html) 'SyncOptions' (http://www.tux.org/~peterw/slim/SyncOptions.html) 'VolumeLock' (http://www.tux.org/~peterw/slim/VolumeLock.html) peterw's Profile: http://forums.slimdevices.com/member.php?userid=2107 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
peterw;536339 Wrote: I think you must *not* be using SB3 codes. What kind of remote control is it, and how do you *know* it's sending Slim Devices codes? Have you disabled the jvc .ir codes for your SB3 and restarted SBS to verify your remote isn't sending JVC codes? I'm using a Pronto Pro TSU7000. I have descrete IR codes set that work perfect with my SB3. When I press the ON button I get the brightess menu. Most buttons produce nothing. -- DeWayne DeWayne's Profile: http://forums.slimdevices.com/member.php?userid=4345 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
DeWayne;536341 Wrote: I'm using a Pronto Pro TSU7000. I have descrete IR codes set that work perfect with my SB3. When I press the ON button I get the brightess menu. Most buttons produce nothing. I'd suggest turning on IR debugging in SBS, pointing your remotes at the SB3, and comparing the hex codes for your Pronto and an official Slim/Logitech remote. I've had no trouble with my remotes, both Slim/Logitech and One For All that I've programmed with Slim hex codes. I hope this isn't a growing problem, but I'm starting to fear that some universal remote vendors offered JVC codes that they (mis)labeled as Squeezebox codes. :-/ -- peterw http://www.tux.org/~peterw/ Free plugins: 'AllQuiet' (http://www.tux.org/~peterw/slim/AllQuiet.html) 'Auto Dim/AutoDisplay' (http://www.tux.org/~peterw/slim/AutoDisplay.html) 'BlankSaver' (http://www.tux.org/~peterw/slim/BlankSaver.html) 'ContextMenu' (http://www.tux.org/~peterw/slim/ContextMenu.html) 'DenonSerial' (http://www.tux.org/~peterw/slim/DenonSerial.html) 'FuzzyTime' (http://www.tux.org/~peterw/slim/FuzzyTime.html) 'KidsPlay' (http://www.tux.org/~peterw/slim/KidsPlay.html) 'KitchenTimer' (http://www.tux.org/~peterw/slim/KitchenTimer.html) 'PlayLog' (http://www.tux.org/~peterw/slim/PlayLog.html) 'PowerCenter/BottleRocket' (http://www.tux.org/~peterw/slim/PowerCenter.html) 'SaverSwitcher' (http://www.tux.org/~peterw/slim/SaverSwitcher.html) 'SettingsManager' (http://www.tux.org/~peterw/slim/SettingsManager.html) 'SleepFade' (http://www.tux.org/~peterw/slim/SleepFade.html) 'StatusFirst' (http://www.tux.org/~peterw/slim/StatusFirst.html) 'SyncOptions' (http://www.tux.org/~peterw/slim/SyncOptions.html) 'VolumeLock' (http://www.tux.org/~peterw/slim/VolumeLock.html) peterw's Profile: http://forums.slimdevices.com/member.php?userid=2107 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
Ok I understand what your saying. Where on the slim website can I find clean hex codes to comapare these to? I thought at one time they were there but now I can't find them. The ones I have more then likely came from remotecentral. -- DeWayne DeWayne's Profile: http://forums.slimdevices.com/member.php?userid=4345 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
peterw;535672 Wrote: Touch recognizes Slim Devices IR codes. Unlike SB1/2/3/Boom, it does not recognize JVC DVD IR codes. Thanks. Not sure why it doesn't respond then. I will download the Slim Devices codes from Remote Central again. -- paltomare paltomare's Profile: http://forums.slimdevices.com/member.php?userid=2062 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
Re: [SlimDevices: Touch] Touch Remote Control Codes
peterw;535672 Wrote: Touch recognizes Slim Devices IR codes. Unlike SB1/2/3/Boom, it does not recognize JVC DVD IR codes. Thanks. Not sure why it doesn't respond then. I will download the Slim Devices codes from Remote Central again. -- paltomare paltomare's Profile: http://forums.slimdevices.com/member.php?userid=2062 View this thread: http://forums.slimdevices.com/showthread.php?t=77401 ___ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
