[Touch-packages] [Bug 1313042] Re: console-kit-daemon Glib-CRITICAL warning
I think I have given some hints on what source changes might be required in https://bugs.launchpad.net/ubuntu/+source/consolekit/+bug/1313042/comments/7 I am not sure if these changes will ever be implemented in the package, because http://freedesktop.org/wiki/Software/ConsoleKit/ tells ConsoleKit is currently not actively maintained. The focus has shifted to the built-in seat/user/session management of Software/systemd called systemd-logind! (I do not have any knowledge what has to be done to replace consolekit functionality by systemd-logind.) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to consolekit in Ubuntu. https://bugs.launchpad.net/bugs/1313042 Title: console-kit-daemon Glib-CRITICAL warning Status in “consolekit” package in Ubuntu: Confirmed Bug description: The day I upgraded from 13.10 to 14.04 some of my ssh sessions into the new system (server side is Ubuntu 14.04) started hanging. The symptom is: I run some command with a lot of output (say a few hundreds of lines) in an ssh session, and the second the command completes, and the shell displays a new prompt, the shell stops responding to keyboard input. At the exact time of the hang (to the second) I always see these 3 warnings in syslog: Apr 21 18:15:25 xx console-kit-daemon[3357]: GLib-CRITICAL: Source ID 469 was not found when attempting to remove it Apr 21 18:15:25 xx console-kit-daemon[3357]: GLib-CRITICAL: Source ID 86 was not found when attempting to remove it Apr 21 18:15:25 xx console-kit-daemon[3357]: GLib-CRITICAL: Source ID 86 was not found when attempting to remove it The Source ID numbers vary, but the warnings always come in triplets at the time of the hang. I was able to reproduce this about 10 times today. Every time the session hangs, these warnings appear in the log and vice versa: every time they appear in the log, I have a hanged remote session. A quote from an upstream (bugzilla.gnome.org) comment: https://bugzilla.gnome.org/show_bug.cgi?id=721369 GLib recently started throwing a warning when g_source_remove() is passed garbage (as per warning). Your applications have probably been broken for a while, and there's no telling what could actually have happened in the past when g_source_remove() would happily close any random source because the programmer got the wrong argument to g_source_remove(). So based on this I'm opening a bug against consolekit for bad calls to g_source_remove() which seem to be related to the ssh hang. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/consolekit/+bug/1313042/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1229257] Re: assertion failure warnings output, imports old static gobject bindings somewhere
** Changed in: python-novaclient (Ubuntu) Assignee: Harikrishna (harikrishna-mallavolu) = (unassigned) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pygobject-2 in Ubuntu. https://bugs.launchpad.net/bugs/1229257 Title: assertion failure warnings output, imports old static gobject bindings somewhere Status in “pygobject-2” package in Ubuntu: Invalid Status in “python-novaclient” package in Ubuntu: Triaged Bug description: When I run various nova commands, stderr gets assertion failure warnings spewed on it. Unsure if this is a gobject issue, or a nova client issue, so marking it as both. lamot % nova list /usr/lib/python2.7/dist-packages/gobject/constants.py:24: Warning: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed import gobject._gobject +--+---+++-++ ... (command functions normally other than the extraneous lines.) ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: python-gobject 3.9.92-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-7.14-generic 3.11.1 Uname: Linux 3.11.0-7-generic x86_64 ApportVersion: 2.12.1-0ubuntu4 Architecture: amd64 Date: Mon Sep 23 09:44:37 2013 InstallationDate: Installed on 2013-04-22 (153 days ago) InstallationMedia: Ubuntu-Server 13.04 Raring Ringtail - Release amd64 (20130422) MarkForUpload: True PackageArchitecture: all SourcePackage: pygobject UpgradeStatus: Upgraded to saucy on 2013-09-17 (5 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pygobject-2/+bug/1229257/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1029289] Re: Need to authorize my google account each time I boot the computer
@Ruben: for an LTS the process requires that things be fixed upstream first (evolution 14.10 in that case) and then backported to the stable release. This is to avoid fixes not being carried over because they applied to an older release. On Sun, Sep 7, 2014 at 3:29 PM, Coeur Noir gerald.maruc...@yahoo.fr wrote: I don't use Evolution on my PC's but thunderbird (with add-ons to sync lighting with google agendas and contacts) And my thunderbird's still run ok despite of the bug. I can confirm the bug is still there even after fresh install of ubuntu 14.04. -- You received this bug notification because you are a member of Ubuntu Online Accounts, which is subscribed to Online Accounts: Sign-on UI. https://bugs.launchpad.net/bugs/1029289 Title: Need to authorize my google account each time I boot the computer To manage notifications about this bug go to: https://bugs.launchpad.net/account-plugins/+bug/1029289/+subscriptions -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to signon-plugin-oauth2 in Ubuntu. https://bugs.launchpad.net/bugs/1029289 Title: Need to authorize my google account each time I boot the computer Status in Online Accounts: Account plugins: In Progress Status in Online Accounts: OAuth2 plug-in: Unknown Status in Online Accounts: Sign-on UI: Fix Released Status in “account-plugins” package in Ubuntu: Fix Released Status in “evolution-data-server” package in Ubuntu: Confirmed Status in “signon-plugin-oauth2” package in Ubuntu: Fix Released Status in “account-plugins” source package in Quantal: Fix Released Status in “signon-plugin-oauth2” source package in Quantal: Fix Released Bug description: [Impact] Google calendar integration is broken, and users are requested to re-enter their Google password everytime they log in, or everytime they enable/disable their Google account from the System Settings. [Test Case] Disable/re-enable your Google account. When affected by this bug, a notification will appear and you'll be asked to enter your Google password in the Online Accounts panel in System Settings. [Regression Potential] Minimal: the fix is a backport of a patch from the evolution-data-server code which is already in 14.10, and which only touches the calendar code (which is currently broken). Old description === [Test Case] Sometimes after one day, sometimes after one week, the system indicator will turn red and the Google account will be marked as needing reauthentication. Time can vary, but any period shorter than one month is a symptom of the bug. [Regression Potential] Minimal: the change to the Google plugin (in account-plugins) simply changes the authentication method, in a way that is well-documented. The change in signon-plugin-oauth2 affects only those accounts/providers which use the OAuth refresh tokens -- which is only Google, at the moment -- and in a way that can't possibly break any existing functionality; if the new code had some mistake, the refresh token would be unusable and the system would automatically fall back to requesting a new access token (which is exactly what happens now, with this bug). I'll try to find why the account-plugins package was not uploaded; indeed, both are required in order to fix this bug. To manage notifications about this bug go to: https://bugs.launchpad.net/account-plugins/+bug/1029289/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1301015] Re: Networking does not restart
Echoing comment #15, please provide evidence that this was discussed somewhere, and why it was deemed important enough to castrate server admins. I just got bitten by it and ended up disabling networking on a server that's an hour's drive away. :-( -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ifupdown in Ubuntu. https://bugs.launchpad.net/bugs/1301015 Title: Networking does not restart Status in “ifupdown” package in Ubuntu: Opinion Bug description: In Ubuntu Server 14.04 it appears it is not possible to restart networking. This is fresh install from ISO. wirehive@ubuntu:~$ sudo /etc/init.d/networking restart wirehive@ubuntu:~$ echo $? 1 wirehive@ubuntu:~$ sudo service networking restart stop: Job failed while stopping start: Job is already running: networking wirehive@ubuntu:~$ sudo bash -x /etc/init.d/networking restart + PATH=/sbin:/bin + RUN_DIR=/run/network + IFSTATE=/run/network/ifstate + STATEDIR=/run/network/state + '[' -x /sbin/ifup ']' + '[' -x /sbin/ifdown ']' + . /lib/lsb/init-functions +++ run-parts --lsbsysinit --list /lib/lsb/init-functions.d ++ for hook in '$(run-parts --lsbsysinit --list /lib/lsb/init-functions.d 2/dev/null)' ++ '[' -r /lib/lsb/init-functions.d/20-left-info-blocks ']' ++ . /lib/lsb/init-functions.d/20-left-info-blocks ++ for hook in '$(run-parts --lsbsysinit --list /lib/lsb/init-functions.d 2/dev/null)' ++ '[' -r /lib/lsb/init-functions.d/50-ubuntu-logging ']' ++ . /lib/lsb/init-functions.d/50-ubuntu-logging +++ LOG_DAEMON_MSG= ++ FANCYTTY= ++ '[' -e /etc/lsb-base-logging.sh ']' ++ true + CONFIGURE_INTERFACES=yes + EXCLUDE_INTERFACES= + VERBOSE=no + '[' -f /etc/default/networking ']' + verbose= + '[' no = yes ']' + case $1 in + init_is_upstart + '[' -x /sbin/initctl ']' + /bin/grep -q upstart + /sbin/initctl version + return 0 + exit 1 wirehive@ubuntu:~$ sudo bash -x service networking restart ++ basename service + VERSION='service ver. 0.91-ubuntu1' ++ basename service + USAGE='Usage: service option | --status-all | [ service_name [ command | --full-restart ] ]' + SERVICE= + ACTION= + SERVICEDIR=/etc/init.d + OPTIONS= + '[' 2 -eq 0 ']' + cd / + '[' 2 -gt 0 ']' + case ${1} in + '[' -z '' -a 2 -eq 1 -a networking = --status-all ']' + '[' 2 -eq 2 -a restart = --full-restart ']' + '[' -z '' ']' + SERVICE=networking + shift + '[' 1 -gt 0 ']' + case ${1} in + '[' -z networking -a 1 -eq 1 -a restart = --status-all ']' + '[' 1 -eq 2 -a '' = --full-restart ']' + '[' -z networking ']' + '[' -z '' ']' + ACTION=restart + shift + '[' 0 -gt 0 ']' + '[' -r /etc/init/networking.conf ']' + which initctl + grep -q upstart + initctl version + case ${ACTION} in + stop networking stop: Job failed while stopping + : + exec start networking start: Job is already running: networking wirehive@ubuntu:~$ To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ifupdown/+bug/1301015/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366695] Re: New voicemail messages notification without new message on voicemail
The indicator is only the container, the content comes from services, in this case I think the telephony one ** Package changed: indicator-messages (Ubuntu) = telephony-service (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to telephony-service in Ubuntu. https://bugs.launchpad.net/bugs/1366695 Title: New voicemail messages notification without new message on voicemail Status in “telephony-service” package in Ubuntu: New Bug description: The message indicator reports that there are new messages on voicemail each time I unlock my SIM card, even if there is no new message on the voicemail or the voicemail is empty (nothing archived even) ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: indicator-messages 13.10.1+14.10.20140814.1-0ubuntu1 [origin: Ubuntu RTM] Uname: Linux 3.4.67 armv7l ApportVersion: 2.14.7-0ubuntu1 Architecture: armhf Date: Mon Sep 8 09:37:44 2014 InstallationDate: Installed on 2014-09-08 (0 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20140908-030254) SourcePackage: indicator-messages UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/telephony-service/+bug/1366695/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366603] Re: Sync pango1.0 1.36.7-1 (main) from Debian unstable (main)
fonts-cantarell is in universe. We need a MIR for this or workaround this. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pango1.0 in Ubuntu. https://bugs.launchpad.net/bugs/1366603 Title: Sync pango1.0 1.36.7-1 (main) from Debian unstable (main) Status in “pango1.0” package in Ubuntu: New Bug description: Please sync pango1.0 1.36.7-1 (main) from Debian unstable (main) Changelog entries since current utopic version 1.36.6-1: pango1.0 (1.36.7-1) unstable; urgency=medium * New upstream release. * Add build-dependency on fonts-cantarell to avoid test failure. - We rely on gnome-core pulling this in for us in normal operations. * Run wrap-and-sort -- Andreas Henriksson andr...@fatal.se Sat, 06 Sep 2014 09:57:33 -0700 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pango1.0/+bug/1366603/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1353951] Re: gnome online accounts require autentication on startup
** Also affects: evolution-data-server via https://bugzilla.gnome.org/show_bug.cgi?id=735311 Importance: Unknown Status: Unknown ** Changed in: evolution-data-server (Ubuntu) Status: New = Triaged ** Changed in: evolution-data-server (Ubuntu) Importance: Undecided = High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gnome-online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1353951 Title: gnome online accounts require autentication on startup Status in Evolution Data Server: Unknown Status in “evolution-data-server” package in Ubuntu: Triaged Status in “gnome-online-accounts” package in Ubuntu: Confirmed Bug description: Gnome online accounts requires autentication on startup, but even typing the correct password in the box, the program says the password is wrong. By the way evolution and other programs work well with online accounts. I'm using Ubuntu-gnome 14.04 LTS 64bit on different machines and have the same behaviour. Just to be clear: online-accounts works well, just at startup it opens an administration window where it requires to insert the password for my google accounts; if I type the correct password it says that the password is wrong, the only way to close the window is to click on discard and then all works well. To manage notifications about this bug go to: https://bugs.launchpad.net/evolution-data-server/+bug/1353951/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366703] [NEW] Google starred contacts should be marked as Favorites in Ubuntu touch (and vice-versa)
Public bug reported: When syncing contacts with google, the Special (starred) contacts are not marked as favorite in Ubuntu touch. For the same reason, when Favorite contacts are added, in Ubuntu they should be starred ar google level. ** Affects: syncevolution (Ubuntu) Importance: Medium Status: New ** Tags: rtm14 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to syncevolution in Ubuntu. https://bugs.launchpad.net/bugs/1366703 Title: Google starred contacts should be marked as Favorites in Ubuntu touch (and vice-versa) Status in “syncevolution” package in Ubuntu: New Bug description: When syncing contacts with google, the Special (starred) contacts are not marked as favorite in Ubuntu touch. For the same reason, when Favorite contacts are added, in Ubuntu they should be starred ar google level. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/syncevolution/+bug/1366703/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1365509] Re: Videos fail to play from gallery app
I tried with a video recorded with the camera and the video in the description with build: version version: 23 version ubuntu: 20140908 version device: 20140904-741ef02 version custom: krillin-0.3a And confirm that it is fixed. ** Changed in: media-hub Status: New = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor-easyprof-ubuntu in Ubuntu. https://bugs.launchpad.net/bugs/1365509 Title: Videos fail to play from gallery app Status in Gallery App: Invalid Status in Media Hub: Fix Released Status in “apparmor-easyprof-ubuntu” package in Ubuntu: Invalid Bug description: com.ubuntu.gallery 2.9.1.1049 Videos launched from the gallery app do not play in mediaplayer even if the video plays perfectly when launched from other apps (scope, filemanager or directly) TEST CASE: 1. Download http://samplemedia.linaro.org/H264/tears_of_steel_1080p_H264_24fps.mov 2. Copy it to /home/phablet/Videos with MTP (nautilus or gvfs-copy) 3. Open the gallery-app 4. Locate the video in the gallery 5. Tap the video thumbnail to play it in the media player ACTUAL RESULT The video plays but is black or green and with audio only, or doesn't play at all. Often there is a media-hub-server crash and sometimes a mediaplayer crash (bug 1364476) To manage notifications about this bug go to: https://bugs.launchpad.net/gallery-app/+bug/1365509/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1357007] Re: Greeter displays untranslated user metrics
It turns out that I also needed to enable language pack generation, as this package is still in universe. ** Changed in: libusermetrics Status: Fix Released = In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libusermetrics in Ubuntu. https://bugs.launchpad.net/bugs/1357007 Title: Greeter displays untranslated user metrics Status in Anonymous User Metrics Library: In Progress Status in “libusermetrics” package in Ubuntu: Fix Released Bug description: Greeter displays an untranslated string from libusermetrics. Test case. - Switch Ubuntu Touch to Spanish. - Open the Greeter. Expected result. - Greeter must display No hay fuentes de datos disponibles (libusermetrics/po/es.po) Actual result. - Greeter displays No data sources available. See screenshot. Maybe libusermetrics is not setting the locale domain correctly? To manage notifications about this bug go to: https://bugs.launchpad.net/libusermetrics/+bug/1357007/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1365362] Re: 10de:1080 [Intel DP67DE] Xorg Backtracing
I tried to install nvidia drivers in live, but it does not work after log out and log in. It freezes before desktop can appear, only distorted background shows. I'll try it later with another dekstop image. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1365362 Title: 10de:1080 [Intel DP67DE] Xorg Backtracing Status in “xorg” package in Ubuntu: Incomplete Bug description: I notice in a backtrace in my https://launchpadlibrarian.net/184002264/XorgLog.txt . ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014 GCC version: gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Thu Sep 4 10:16:56 2014 DistUpgraded: 2014-05-28 10:18:54,825 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu GraphicsCard: NVIDIA Corporation GF110 [GeForce GTX 580] [10de:1080] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:2550] InstallationDate: Installed on 2013-02-27 (553 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=c07436f0-fb64-48d1-a92d-cc2a58369813 ro quiet splash rootdelay=20 SourcePackage: xorg UpgradeStatus: Upgraded to trusty on 2014-05-28 (98 days ago) dmi.bios.date: 11/16/2010 dmi.bios.vendor: Intel Corp. dmi.bios.version: BAP6710H.86A.0037.2010.1116.2134 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DP67DE dmi.board.vendor: Intel Corporation dmi.board.version: AAG10217-204 dmi.chassis.type: 3 dmi.modalias: dmi:bvnIntelCorp.:bvrBAP6710H.86A.0037.2010.1116.2134:bd11/16/2010:svn:pn:pvr:rvnIntelCorporation:rnDP67DE:rvrAAG10217-204:cvn:ct3:cvr: version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.1 version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Thu Sep 4 09:24:27 2014 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.15.1-0ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1365362/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366459] Re: Sync gst-plugins-base1.0 1.4.1-1 (main) from Debian unstable (main)
This bug was fixed in the package gst-plugins-base1.0 - 1.4.1-1 Sponsored for Jackson Doak (noskcaj) --- gst-plugins-base1.0 (1.4.1-1) unstable; urgency=medium * New upstream bugfix release. -- Sebastian Dröge sl...@debian.org Wed, 27 Aug 2014 14:32:29 +0300 ** Changed in: gst-plugins-base1.0 (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gst-plugins-base1.0 in Ubuntu. https://bugs.launchpad.net/bugs/1366459 Title: Sync gst-plugins-base1.0 1.4.1-1 (main) from Debian unstable (main) Status in “gst-plugins-base1.0” package in Ubuntu: Fix Released Bug description: Please sync gst-plugins-base1.0 1.4.1-1 (main) from Debian unstable (main) Changelog entries since current utopic version 1.4.0-1: gst-plugins-base1.0 (1.4.1-1) unstable; urgency=medium * New upstream bugfix release. -- Sebastian Dröge sl...@debian.org Wed, 27 Aug 2014 14:32:29 +0300 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gst-plugins-base1.0/+bug/1366459/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366455] Re: Sync orc 1:0.4.22-1 (main) from Debian unstable (main)
This bug was fixed in the package orc - 1:0.4.22-1 Sponsored for Jackson Doak (noskcaj) --- orc (1:0.4.22-1) unstable; urgency=medium * New upstream bugfix release. -- Sebastian Dröge sl...@debian.org Wed, 27 Aug 2014 12:37:05 +0300 ** Changed in: orc (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to orc in Ubuntu. https://bugs.launchpad.net/bugs/1366455 Title: Sync orc 1:0.4.22-1 (main) from Debian unstable (main) Status in “orc” package in Ubuntu: Fix Released Bug description: Please sync orc 1:0.4.22-1 (main) from Debian unstable (main) Changelog entries since current utopic version 1:0.4.21-1: orc (1:0.4.22-1) unstable; urgency=medium * New upstream bugfix release. -- Sebastian Dröge sl...@debian.org Wed, 27 Aug 2014 12:37:05 +0300 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/orc/+bug/1366455/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1364466] Re: /usr/bin/mediascanner-service-2.0:*** Error in `mediascanner-service-2.0': double free or corruption (fasttop): ADDR ***
** Changed in: gstreamer (Ubuntu) Importance: Undecided = Critical ** Changed in: mediascanner2 (Ubuntu) Importance: Critical = Undecided -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mediascanner2 in Ubuntu. https://bugs.launchpad.net/bugs/1364466 Title: /usr/bin/mediascanner-service-2.0:*** Error in `mediascanner- service-2.0': double free or corruption (fasttop): ADDR *** Status in “gstreamer” package in Ubuntu: New Status in “mediascanner2” package in Ubuntu: Invalid Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding mediascanner2. This problem was most recently seen with version 0.104+14.10.20140825-0ubuntu1, the problem page at https://errors.ubuntu.com/problem/354f10fdaba609ee33dd0a2868637ec79c590b56 contains more details. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gstreamer/+bug/1364466/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1364466] Re: /usr/bin/mediascanner-service-2.0:*** Error in `mediascanner-service-2.0': double free or corruption (fasttop): ADDR ***
** Changed in: mediascanner2 (Ubuntu) Status: Confirmed = Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mediascanner2 in Ubuntu. https://bugs.launchpad.net/bugs/1364466 Title: /usr/bin/mediascanner-service-2.0:*** Error in `mediascanner- service-2.0': double free or corruption (fasttop): ADDR *** Status in “gstreamer” package in Ubuntu: New Status in “mediascanner2” package in Ubuntu: Invalid Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding mediascanner2. This problem was most recently seen with version 0.104+14.10.20140825-0ubuntu1, the problem page at https://errors.ubuntu.com/problem/354f10fdaba609ee33dd0a2868637ec79c590b56 contains more details. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gstreamer/+bug/1364466/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366364] Re: Count sms that failed to be sent as sent, on the greeter
** Summary changed: - Count sms that failed to be sent as sent on the greeter + Count sms that failed to be sent as sent, on the greeter -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to messaging-app in Ubuntu. https://bugs.launchpad.net/bugs/1366364 Title: Count sms that failed to be sent as sent, on the greeter Status in “messaging-app” package in Ubuntu: New Bug description: Using rtm 17 on krillin, after having some failed message sending (e.g tried to send a contact info and a photo on a phone without data plan), the lock screen animation displays a count including those messages, that seems wrong To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1366364/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1362818] Re: no previews showing up for recorded videos in camera/gallery/video scope
** Package changed: thumbnailer (Ubuntu) = gst-plugins-bad1.0 (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1362818 Title: no previews showing up for recorded videos in camera/gallery/video scope Status in Camera App: Invalid Status in “camera-app” package in Ubuntu: Invalid Status in “gst-plugins-bad1.0” package in Ubuntu: New Bug description: krillin: rtm #11 latest devel-proposed image on nexus or krillin record a video with camera-app open the photo roll in camera-app expected result: the video thumbnail should show a preview of the first frame actual result: just get the placeholder icon that has playbutton and video reel in background To manage notifications about this bug go to: https://bugs.launchpad.net/camera-app/+bug/1362818/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1362818] Re: no previews showing up for recorded videos in camera/gallery/video scope
** Changed in: gst-plugins-bad1.0 (Ubuntu) Assignee: Jussi Pakkanen (jpakkane) = Jim Hodapp (jhodapp) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1362818 Title: no previews showing up for recorded videos in camera/gallery/video scope Status in Camera App: Invalid Status in “camera-app” package in Ubuntu: Invalid Status in “gst-plugins-bad1.0” package in Ubuntu: New Bug description: krillin: rtm #11 latest devel-proposed image on nexus or krillin record a video with camera-app open the photo roll in camera-app expected result: the video thumbnail should show a preview of the first frame actual result: just get the placeholder icon that has playbutton and video reel in background To manage notifications about this bug go to: https://bugs.launchpad.net/camera-app/+bug/1362818/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366709] Re: please enable opencl
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: mesa (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1366709 Title: please enable opencl Status in “mesa” package in Ubuntu: Confirmed Bug description: [This is the same as bug #1319835, since I cannot reopen it] Please enable OpenCL in mesa package which is already available in debian package and was disabled in 10.1.0-1ubuntu1. Previuos bug was closed as Won't Fix since there were no software using it: I don't think there's a point to opencl at the moment, as soon as something in the archive really needs it feel free to reopen it. Here is a list of Ubuntu source package using it (the list may be incomplete): bfgminer pyopencl pyrit-opencl starpu-contrib wine1.6 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1366709/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366709] [NEW] please enable opencl
Public bug reported: [This is the same as bug #1319835, since I cannot reopen it] Please enable OpenCL in mesa package which is already available in debian package and was disabled in 10.1.0-1ubuntu1. Previuos bug was closed as Won't Fix since there were no software using it: I don't think there's a point to opencl at the moment, as soon as something in the archive really needs it feel free to reopen it. Here is a list of Ubuntu source package using it (the list may be incomplete): bfgminer pyopencl pyrit-opencl starpu-contrib wine1.6 ** Affects: mesa (Ubuntu) Importance: Undecided Status: Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1366709 Title: please enable opencl Status in “mesa” package in Ubuntu: Confirmed Bug description: [This is the same as bug #1319835, since I cannot reopen it] Please enable OpenCL in mesa package which is already available in debian package and was disabled in 10.1.0-1ubuntu1. Previuos bug was closed as Won't Fix since there were no software using it: I don't think there's a point to opencl at the moment, as soon as something in the archive really needs it feel free to reopen it. Here is a list of Ubuntu source package using it (the list may be incomplete): bfgminer pyopencl pyrit-opencl starpu-contrib wine1.6 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1366709/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366708] Re: unattended-upgrade crashed with SystemError in open(): E:Problem renaming the file /var/cache/apt/pkgcache.bin.guEChP to /var/cache/apt/pkgcache.bin - rename (2: No
** Tags removed: need-duplicate-check ** Changed in: unattended-upgrades (Ubuntu) Importance: Undecided = Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unattended-upgrades in Ubuntu. https://bugs.launchpad.net/bugs/1366708 Title: unattended-upgrade crashed with SystemError in open(): E:Problem renaming the file /var/cache/apt/pkgcache.bin.guEChP to /var/cache/apt/pkgcache.bin - rename (2: No such file or directory), W:You may want to run apt-get update to correct these problems Status in “unattended-upgrades” package in Ubuntu: New Bug description: I get this after every session startup in Ubuntu Gnome 14.10 (currently dev) with Gnome 3 PPAs (noth main and staging added). ProblemType: Crash DistroRelease: Ubuntu 14.10 Package: unattended-upgrades 0.82.8 ProcVersionSignature: Ubuntu 3.16.0-12.18-generic 3.16.1 Uname: Linux 3.16.0-12-generic x86_64 ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 Date: Wed Sep 3 11:20:21 2014 ExecutablePath: /usr/bin/unattended-upgrade InstallationDate: Installed on 2014-08-03 (35 days ago) InstallationMedia: Ubuntu-GNOME 14.10 Utopic Unicorn - Alpha amd64 (20140802) InterpreterPath: /usr/bin/python3.4 PackageArchitecture: all ProcCmdline: /usr/bin/python3 /usr/bin/unattended-upgrade ProcEnviron: TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/sh PythonArgs: ['/usr/bin/unattended-upgrade'] SourcePackage: unattended-upgrades Title: unattended-upgrade crashed with SystemError in open(): E:Problem renaming the file /var/cache/apt/pkgcache.bin.guEChP to /var/cache/apt/pkgcache.bin - rename (2: No such file or directory), W:You may want to run apt-get update to correct these problems UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unattended-upgrades/+bug/1366708/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366707] Re: package libqtcore4 4:4.8.1-0ubuntu4.8 failed to install/upgrade: conffile './etc/xdg/Trolltech.conf' is not in sync with other instances of the same package
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qt4-x11 in Ubuntu. https://bugs.launchpad.net/bugs/1366707 Title: package libqtcore4 4:4.8.1-0ubuntu4.8 failed to install/upgrade: conffile './etc/xdg/Trolltech.conf' is not in sync with other instances of the same package Status in “qt4-x11” package in Ubuntu: New Bug description: The installation give me a loop : the elements can't be installed or removed. I can't ripair neither stop the loop ProblemType: Package DistroRelease: Ubuntu 12.04 Package: libqtcore4 4:4.8.1-0ubuntu4.8 ProcVersionSignature: Ubuntu 3.2.0-68.102-generic 3.2.62 Uname: Linux 3.2.0-68-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.0.1-0ubuntu17.7 Architecture: amd64 Date: Mon Sep 8 10:23:10 2014 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-oneiric-amd64-2016-1 DpkgTerminalLog: Unpacking libqtcore4:i386 (from .../libqtcore4_4%3a4.8.1-0ubuntu4.8_i386.deb) ... dpkg: error processing /var/cache/apt/archives/libqtcore4_4%3a4.8.1-0ubuntu4.8_i386.deb (--unpack): conffile './etc/xdg/Trolltech.conf' is not in sync with other instances of the same package DuplicateSignature: package:libqtcore4:4:4.8.1-0ubuntu4.8:conffile './etc/xdg/Trolltech.conf' is not in sync with other instances of the same package ErrorMessage: conffile './etc/xdg/Trolltech.conf' is not in sync with other instances of the same package InstallationMedia: Ubuntu 11.10 Oneiric - Build amd64 LIVE Binary 2016-18:24 MarkForUpload: True SourcePackage: qt4-x11 Title: package libqtcore4 4:4.8.1-0ubuntu4.8 failed to install/upgrade: conffile './etc/xdg/Trolltech.conf' is not in sync with other instances of the same package UpgradeStatus: Upgraded to precise on 2014-05-23 (107 days ago) modified.conffile..etc.xdg.Trolltech.conf: [qt] 4.8\libraryPath=/usr/lib/kde4/plugins mtime.conffile..etc.xdg.Trolltech.conf: 2012-04-11T10:57:48 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qt4-x11/+bug/1366707/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1319835] Re: please enable opencl
*** This bug is a duplicate of bug 1366709 *** https://bugs.launchpad.net/bugs/1366709 ** This bug has been marked a duplicate of bug 1366709 please enable opencl -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1319835 Title: please enable opencl Status in “mesa” package in Ubuntu: Won't Fix Bug description: Please enable OpenCL in mesa package which is already available in debian package and was disabled in 10.1.0-1ubuntu1. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1319835/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366458] Re: Sync gstreamer1.0 1.4.1-1 (main) from Debian unstable (main)
This bug was fixed in the package gstreamer1.0 - 1.4.1-1 Sponsored for Jackson Doak (noskcaj) --- gstreamer1.0 (1.4.1-1) unstable; urgency=medium * New upstream bugfix release. -- Sebastian Dröge sl...@debian.org Wed, 27 Aug 2014 14:27:45 +0300 ** Changed in: gstreamer1.0 (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gstreamer1.0 in Ubuntu. https://bugs.launchpad.net/bugs/1366458 Title: Sync gstreamer1.0 1.4.1-1 (main) from Debian unstable (main) Status in “gstreamer1.0” package in Ubuntu: Fix Released Bug description: Please sync gstreamer1.0 1.4.1-1 (main) from Debian unstable (main) Changelog entries since current utopic version 1.4.0-1: gstreamer1.0 (1.4.1-1) unstable; urgency=medium * New upstream bugfix release. -- Sebastian Dröge sl...@debian.org Wed, 27 Aug 2014 14:27:45 +0300 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gstreamer1.0/+bug/1366458/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366364] Re: Count sms that failed to be sent as sent, on the greeter
could also be a bug in the telephony-service I guess -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to messaging-app in Ubuntu. https://bugs.launchpad.net/bugs/1366364 Title: Count sms that failed to be sent as sent, on the greeter Status in “messaging-app” package in Ubuntu: New Bug description: Using rtm 17 on krillin, after having some failed message sending (e.g tried to send a contact info and a photo on a phone without data plan), the lock screen animation displays a count including those messages, that seems wrong To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1366364/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1349462] Re: mw600 sony ericson doesnt work on ubuntu 14.04
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: bluez (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1349462 Title: mw600 sony ericson doesnt work on ubuntu 14.04 Status in “bluez” package in Ubuntu: Confirmed Bug description: Ubuntu 14.04.1 LTS Release: 14.04 64 bits 2)bluez *** 4.101-0ubuntu13 0 3) What you expected to happen I expect that audio output display mw600 in order to select and listen sound or music on my mw600 device. 4) What happened instead Sound manager doesnt display mw600 as sound output device To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1349462/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1349462] Re: mw600 sony ericson doesnt work on ubuntu 14.04
This is perhaps not the exactly the same bug as affects me because MW600 shows up a sound output device but it only works as a handset (HDP/HFP) but not as audio (A2DP). It worked in 12.04. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1349462 Title: mw600 sony ericson doesnt work on ubuntu 14.04 Status in “bluez” package in Ubuntu: Confirmed Bug description: Ubuntu 14.04.1 LTS Release: 14.04 64 bits 2)bluez *** 4.101-0ubuntu13 0 3) What you expected to happen I expect that audio output display mw600 in order to select and listen sound or music on my mw600 device. 4) What happened instead Sound manager doesnt display mw600 as sound output device To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1349462/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366709] Re: please enable opencl
Should be also time to land 10.3 into Utopic archive. (i'm working with rc2 and i'm happy with it) ** Tags added: trusty utopic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1366709 Title: please enable opencl Status in “mesa” package in Ubuntu: Confirmed Bug description: [This is the same as bug #1319835, since I cannot reopen it] Please enable OpenCL in mesa package which is already available in debian package and was disabled in 10.1.0-1ubuntu1. Previuos bug was closed as Won't Fix since there were no software using it: I don't think there's a point to opencl at the moment, as soon as something in the archive really needs it feel free to reopen it. Here is a list of Ubuntu source package using it (the list may be incomplete): bfgminer pyopencl pyrit-opencl starpu-contrib wine1.6 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1366709/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1362378] Re: [messaging-app] timestamps in Chat view not formatted correctly
** Summary changed: - timestamps in Chat view not formatted correctly + [messaging-app] timestamps in Chat view not formatted correctly -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to messaging-app in Ubuntu. https://bugs.launchpad.net/bugs/1362378 Title: [messaging-app] timestamps in Chat view not formatted correctly Status in Messaging App: Fix Released Status in “messaging-app” package in Ubuntu: Fix Released Bug description: build 210 open the Chat view, and the timestamps of the last received messages should be shown in 12 hour clock with am/pm indicator (i.e. like 10:52pm or 05:30am) Instead they are shown with 24 hour clock but with an am/pm indicator (like 21:31pm) which is incorrect To manage notifications about this bug go to: https://bugs.launchpad.net/messaging-app/+bug/1362378/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1248973] Re: The location and gps check box don't stay checked
I don't see this happening - but alas they revert after reboot. Not sure if that would be related. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-location in Ubuntu. https://bugs.launchpad.net/bugs/1248973 Title: The location and gps check box don't stay checked Status in Indicator Location: Fix Released Status in “indicator-location” package in Ubuntu: Fix Released Status in “location-service” package in Ubuntu: Confirmed Status in “platform-api” package in Ubuntu: Confirmed Bug description: If you check the location and gps checkboxes from the indicator- location and then after a minute view the setting again you will see that they are nolonger checked. Maguro image 14 STEPS TO REPRODUCE: 1. Pull down the location indicator 2. Select the checkboxes for Location and GPS 3. Push the indicator back up 4. Wait a minute 5. Pull down the location indicator. EXPECTED RESULTS: I should still have 2 boxes checked. To manage notifications about this bug go to: https://bugs.launchpad.net/indicator-location/+bug/1248973/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1293944] Re: [regression] Mir deb packages with versioned names cannot be installed simultaneously any more
** Branch linked: lp:~vanvugt/mir/version-libmirplatformgraphics ** Changed in: mir/0.6 Status: Fix Released = Won't Fix ** Changed in: mir/0.6 Milestone: 0.6.0 = None ** Changed in: mir Importance: Medium = High ** Changed in: mir/0.6 Importance: Medium = Undecided ** Changed in: mir (Ubuntu) Importance: Medium = High ** Changed in: mir/0.6 Assignee: Chris Halse Rogers (raof) = (unassigned) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mir in Ubuntu. https://bugs.launchpad.net/bugs/1293944 Title: [regression] Mir deb packages with versioned names cannot be installed simultaneously any more Status in Mir: In Progress Status in Mir 0.6 series: Won't Fix Status in “mir” package in Ubuntu: Triaged Bug description: Mir has some packages with ABI-versioned names (libmirserver17, libmirclient7) so that multiple versions can be installed simultaneously, in theory. However this plan is not working; Package: libmirserver17 Section: libs Architecture: i386 amd64 armhf arm64 Multi-Arch: same Pre-Depends: ${misc:Pre-Depends} Depends: ${misc:Depends}, ${shlibs:Depends}, libmirplatform (= ${binary:Version}), libmirplatformgraphics-mesa (= ${binary:Version}) | libmirplatformgraphics-android (= ${binary:Version}), When we bump an ABI number, we also increase the ${binary:Version}. So you can see from the names that libmirplatform* can only have one version installed at a time. And that indirectly means that libmirserverN can never be installed simultaneously with libmirserverN+1. This also leads to annoying CI failures as we're seeing this week: The following packages have unmet dependencies: libmirserver16 : Depends: libmirplatform (= 0.1.6+14.04.20140310-0ubuntu1) but 0.1.7+autopilot0 is to be installed Depends: libmirplatformgraphics-mesa (= 0.1.6+14.04.20140310-0ubuntu1) but 0.1.7+autopilot0 is to be installed or libmirplatformgraphics-android (= 0.1.6+14.04.20140310-0ubuntu1) but 0.1.7+autopilot0 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). There are at least two possible solutions I can think of so far: (1) Change our Depends' to not use straight equality. So we must change: libmirplatform (= ${binary:Version}), to: libmirplatform (= ${binary:Version}), or even to libmirplatform (= some_older_version_based_on_real_requirements), (2) Change libplatform* to include some ABI number in their names. Not ideal. I like (1). To manage notifications about this bug go to: https://bugs.launchpad.net/mir/+bug/1293944/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366743] [NEW] Ubuntu 14.04 only prints LibreOffice Docs
Public bug reported: I use Ubuntu 14.04, a Logilink Fast Ethernet Printserver and a HP Color Laserjet 2550L. Under Ubuntu 12.10 everything worked fine and I could print any file. The printer is connected via a USB to the Printserver and adressed via HP Jet Direct. As already said, everything worked fine under 12.10 and I didn't change any settings on the printserver. I use the ubuntu tool for installing the printer, as a normal user not su. Searching the network, for network printers offers me three possibilities for adressing the printer. HP Jet Direct, IPP and LPD/LPR. I tried all of them with the same result. I use the drivers from the Database, not surprisingly HP/Color Laserjet 2550/HP Color Laserjet 2550 Series Postscript [en] (recommended). After installing the printer the first thing that fails is the Testpage. The ubunut printer spooler tells me that the job is in progress and the printer starts to blink to tell me that he is receiving input. Unfortunatly the job never starts or gets finished. After blinking quite a while the printer stops an nothing happes. Interestingly, after canceling the job on my computer and a restart of the printer, the printserver and my computer, I can open libre office writing Hello World go to print and the printer starts immediately and prints the correct result. But this only works for libreoffice and only with text, as soon as there is an image in the document it doesn't work. I can't print any pdf or even from gedit. Nothing works. Always the same as with the Testpage. Printer starts to blink but nothing happens. lsb_release -rd Description:Ubuntu 14.04.1 LTS Release:14.04 Thanks for Help. ** Affects: ubuntu Importance: Undecided Status: New ** Package changed: cairo (Ubuntu) = ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1366743 Title: Ubuntu 14.04 only prints LibreOffice Docs Status in Ubuntu: New Bug description: I use Ubuntu 14.04, a Logilink Fast Ethernet Printserver and a HP Color Laserjet 2550L. Under Ubuntu 12.10 everything worked fine and I could print any file. The printer is connected via a USB to the Printserver and adressed via HP Jet Direct. As already said, everything worked fine under 12.10 and I didn't change any settings on the printserver. I use the ubuntu tool for installing the printer, as a normal user not su. Searching the network, for network printers offers me three possibilities for adressing the printer. HP Jet Direct, IPP and LPD/LPR. I tried all of them with the same result. I use the drivers from the Database, not surprisingly HP/Color Laserjet 2550/HP Color Laserjet 2550 Series Postscript [en] (recommended). After installing the printer the first thing that fails is the Testpage. The ubunut printer spooler tells me that the job is in progress and the printer starts to blink to tell me that he is receiving input. Unfortunatly the job never starts or gets finished. After blinking quite a while the printer stops an nothing happes. Interestingly, after canceling the job on my computer and a restart of the printer, the printserver and my computer, I can open libre office writing Hello World go to print and the printer starts immediately and prints the correct result. But this only works for libreoffice and only with text, as soon as there is an image in the document it doesn't work. I can't print any pdf or even from gedit. Nothing works. Always the same as with the Testpage. Printer starts to blink but nothing happens. lsb_release -rd Description: Ubuntu 14.04.1 LTS Release: 14.04 Thanks for Help. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1366743/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1350544] Re: Some translations are not loaded
Confirmed on desktop, the translation is there but not used $ gettext -d indicator-datetime Tomorrow\u2003%H:%M Demain\u2003%H:%M But it's still displayed as Tomorrow in the indicator Charles, could you have a look to that? ** Changed in: indicator-datetime (Ubuntu) Importance: Undecided = High ** Also affects: indicator-datetime Importance: Undecided Status: New ** Changed in: indicator-datetime Importance: Undecided = High ** Changed in: indicator-datetime Assignee: (unassigned) = Charles Planincheck (charles) ** Changed in: indicator-datetime Assignee: Charles Planincheck (charles) = Charles Kerr (charlesk) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-datetime in Ubuntu. https://bugs.launchpad.net/bugs/1350544 Title: Some translations are not loaded Status in The Date and Time Indicator: New Status in Ubuntu Translations: Incomplete Status in “indicator-datetime” package in Ubuntu: New Bug description: The translations for some messages don't seem to be loaded. E.g. Tomorrow always appears in English in the list of upcoming events when sliding down the indicator. To manage notifications about this bug go to: https://bugs.launchpad.net/indicator-datetime/+bug/1350544/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1359672] Re: Sending MMS doesn't allow importing images from anywhere else than Gallery
** Changed in: ubuntu-ux Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to messaging-app in Ubuntu. https://bugs.launchpad.net/bugs/1359672 Title: Sending MMS doesn't allow importing images from anywhere else than Gallery Status in Messaging App: Fix Released Status in Ubuntu UX bugs: Fix Released Status in “messaging-app” package in Ubuntu: Fix Released Bug description: Sending MMS doesn't allow importing images from anywhere else than Gallery. I guess it would make sense allowing to pick other image providing apps too. To manage notifications about this bug go to: https://bugs.launchpad.net/messaging-app/+bug/1359672/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366747] [NEW] libudev1 seems to cause a segfault in pcscd when a Vasco DP905v1.1 smart card reader is inserted before pcscd is started
Public bug reported: Hi, When one plugs in a Vasco DP905v1.1 smart card reader before pcscd is started and waits for a few moments, the green 'power' led on this device will go off, indicating that the device is in low-power mode. When this happens, due to an issue with the specific card reader model, it seems to be impossible to revive the card reader without power- cycling the USB bus. This is especially annoying as the time between 'USB bus receives power' and 'pcscd starts' is longer than the time it takes for the DP905v1.1 to go to low-power mode on many systems, causing loss of functionality for people who leave their smart card reader plugged in at boot time, and a segfault when the most obvious way to fix the issue (remove the card reader from the USB bus and plug it in again) is attempted. While the loss of functionality could be considered a bug in the smart card reader, not necessarily libudev's problem, the segfault is a different matter. When one then starts pcscd with the '-f' option (for 'foreground'), the following information is printed to the console: ccid_usb.c:790:ReadUSB() read failed (2/6): -7 Resource temporarily unavailable 05000798 ccid_usb.c:751:WriteUSB() write failed (2/6): -7 Resource temporarily unavailable 05000403 ccid_usb.c:751:WriteUSB() write failed (2/6): -7 Resource temporarily unavailable 0027 ifdhandler.c:158:CreateChannelByNameOrChannel() failed 0021 readerfactory.c:1020:RFInitializeReader() Open Port 0x20 Failed (usb:1a44/0001:libudev:0:/dev/bus/usb/002/006) 0009 readerfactory.c:312:RFAddReader() VASCO DP905v1.1 init failed. 0126 hotplug_libudev.c:391:HPAddDevice() Failed adding USB device: VASCO DP905v1.1 At this point pcscd is stuck waiting, and removing the card reader causes the segfault. I installed a few debug symbols packages and recompiled pcscd with DEB_BUILD_OPTIONS=nostrip in an effort to figure out some more information, and have found the following: At the point when the segfault happens, pcscd will have three threads running: - The first thread is the main thread, which is usually in select() - The second thread seems to be a helper thread of some sort; its stack backtrace contains no function symbols - The third thread will always be in pcscd:hotplug_libudev.c, line 433: udev_enumerate_scan_devices(enumerate); going down the stack trace into libudev gets us: #0 0x772c5200 in __openat_nocancel (fd=-100, file=0x75d228d0 /sys/bus, oflag=591872, mode=0) at ../sysdeps/unix/sysv/linux/wordsize-64/../openat.c:93 #1 0x77296935 in __opendirat (dfd=dfd@entry=-100, name=name@entry=0x75d228d0 /sys/bus) at ../sysdeps/posix/opendir.c:129 #2 0x7729697d in __opendir (name=name@entry=0x75d228d0 /sys/bus) at ../sysdeps/posix/opendir.c:160 #3 0x77bd0a02 in scan_dir ( udev_enumerate=udev_enumerate@entry=0x70001670, basedir=basedir@entry=0x77bd4d11 bus, subdir=subdir@entry=0x77bd4d09 devices, subsystem=subsystem@entry=0x0) at ../src/libudev/libudev-enumerate.c:742 #4 0x77bd1280 in scan_devices_all (udev_enumerate=0x70001670) at ../src/libudev/libudev-enumerate.c:893 #5 udev_enumerate_scan_devices ( udev_enumerate=udev_enumerate@entry=0x70001670) at ../src/libudev/libudev-enumerate.c:922 #6 0x0040e2d9 in HPRescanUsbBus (udev=udev@entry=0x629cb0) at hotplug_libudev.c:433 #7 0x0040e761 in HPEstablishUSBNotifications (udev=0x629cb0) at hotplug_libudev.c:595 #8 0x775a7182 in start_thread (arg=0x75d23700) at pthread_create.c:312 #9 0x772d3fbd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111 Although this thread is always at the same location which makes me think it seems to cause the segfault, I should note that it is in fact the second thread which does so: (gdb) thread 2 [Switching to thread 2 (Thread 4168)] #0 0x76533248 in ?? () (gdb) where #0 0x76533248 in ?? () #1 0x76524700 in ?? () #2 0x0018 in ?? () #3 0x00010005 in ?? () #4 0x000100010004 in ?? () #5 0x76524700 in ?? () #6 0x76524700 in ?? () #7 0x in ?? () but as said, I'm not sure what to do with this. After having figured out that it's somewhere inside libudev, I wanted to file a bug with a crash report, but apparently I must've done something wrong, because apport no longer seems to want to write crash reports on this system. To make matters worse, I also can't create a core dump using 'ulimit -c unlimited'. If someone could help me fix that, I'll happily submit a core dump if needed. This problem has been observed on at least three machines, all running trusty (some amd64, some i386). ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: libudev1 204-5ubuntu20.5 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic x86_64 ApportVersion:
[Touch-packages] [Bug 1357782] Re: udev(7) is wrong
Fixed in packaging git. ** Changed in: systemd (Ubuntu) Status: Triaged = Fix Committed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1357782 Title: udev(7) is wrong Status in “systemd” package in Ubuntu: Fix Committed Bug description: udev(7) is wrong: It says, that system rules are in /usr/lib/udev/rules.d but obviously there are no udev rules! Should be corrected to /lib/udev/rules.d . To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1357782/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1276658] Re: Add offline cache
** Patch added: appSpecificTileCache.diff https://bugs.launchpad.net/ubuntu/+source/qtlocation-opensource-src/+bug/1276658/+attachment/4198380/+files/appSpecificTileCache.diff ** Changed in: qtlocation-opensource-src (Ubuntu) Status: Confirmed = In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtlocation-opensource-src in Ubuntu. https://bugs.launchpad.net/bugs/1276658 Title: Add offline cache Status in “qtlocation-opensource-src” package in Ubuntu: In Progress Bug description: The app should be able to cache downloaded tiles to be used in future runs of the app. In contrast to the download tile pack feature, that allows downloading a region before going on holiday; this would provide faster viewing of previously viewed areas especially when the user has poor signal, as well as less bandwidth usage etc. At present, the QML component caches downloaded tiles while the app is running, but upon closing the app this is all forgotten, and it must download from scratch again the next time it is loaded. So, tiles should be stored in a permanent cache, so that it is not required to download them everytime the app is started. Note: Similar apps allow the user to specify the size of the cache, to meet their requirements. So, they can set the cache size to 1MB or 500MB etc. depending on their needs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtlocation-opensource-src/+bug/1276658/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366752] [NEW] Phone freezes for a moment when message notification appears
Public bug reported: unity8 8.00+14.10.20140903.1~rtm-0ubuntu1 image# 29 RTM When I receive a message, my phone halts for a moment and then resumes. 1. Open messaging app. 2. send a message to your own number 3. before the message is received slowly drag from the left edge to the right What happens: when you are dragging, there is a slight halt in the UI before the OSD appears. ** Affects: unity8 (Ubuntu) Importance: Undecided Assignee: Mirco Müller (macslow) Status: New ** Tags: qa-touch -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1366752 Title: Phone freezes for a moment when message notification appears Status in “unity8” package in Ubuntu: New Bug description: unity8 8.00+14.10.20140903.1~rtm-0ubuntu1 image# 29 RTM When I receive a message, my phone halts for a moment and then resumes. 1. Open messaging app. 2. send a message to your own number 3. before the message is received slowly drag from the left edge to the right What happens: when you are dragging, there is a slight halt in the UI before the OSD appears. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1366752/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366751] [NEW] Preview page keeps showing 'In Progress' even when application purchase is cancelled.
Public bug reported: Steps to reproduce: 1. Setup the pay-service staging account as described in test plan https://wiki.ubuntu.com/Process/Merges/TestPlan/pay-service 2. Now search for Delta app in Ubuntu Store 3. Tap on the price to purchase and install the app. 4. Instead of going aheadh with purchase, cancel the transaction by pressing Cancel button. 5. Observe that, UI will return to application preview page and will keep showing 'In Progress' even when transaction is cancelled. ** Affects: unity-scope-click (Ubuntu RTM) Importance: High Status: New ** Tags: qa-daily-testing rtm14 ** Package changed: unity-scope-click (Ubuntu) = unity-scope-click (Ubuntu RTM) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1366751 Title: Preview page keeps showing 'In Progress' even when application purchase is cancelled. Status in “unity-scope-click” package in Ubuntu RTM: New Bug description: Steps to reproduce: 1. Setup the pay-service staging account as described in test plan https://wiki.ubuntu.com/Process/Merges/TestPlan/pay-service 2. Now search for Delta app in Ubuntu Store 3. Tap on the price to purchase and install the app. 4. Instead of going aheadh with purchase, cancel the transaction by pressing Cancel button. 5. Observe that, UI will return to application preview page and will keep showing 'In Progress' even when transaction is cancelled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-rtm/+source/unity-scope-click/+bug/1366751/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 916542] Re: Unity spread randomly shuffles overlapping windows
The order of the windows appears to be top to bottom, but they are presented left to right when you click the launcher icon, this causes confusion. Suggest that giving right to left priority over top to bottom would simplify the 2 window case. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/916542 Title: Unity spread randomly shuffles overlapping windows Status in Unity: Confirmed Status in “unity” package in Ubuntu: Confirmed Bug description: When the spread is used to display multiple windows of the same application, Unity will randomly order those windows if they overlap. This is annoying when trying to locate one window from a group of very similar windows, eg terminal windows. Since they all look the same in the spread I have to check each one in turn. But because Unity shuffles them around, it is impossible to tell which ones I have already checked. Here is a video which demonstrates the bug: http://www.youtube.com/watch?v=ZwlpdfmtVGA ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: unity 4.24.0-0ubuntu2.1 ProcVersionSignature: Ubuntu 3.0.0-14.23-generic 3.0.9 Uname: Linux 3.0.0-14-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 1.23-0ubuntu4 Architecture: amd64 CompizPlugins: [core,bailer,detection,composite,opengl,compiztoolbox,decor,resize,snap,place,mousepoll,move,gnomecompat,grid,vpswitch,imgpng,wall,session,unitymtgrabhandles,regex,animation,expo,workarounds,fade,ezoom,scale,unityshell] Date: Sat Jan 14 16:51:51 2012 InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Beta amd64 (20110921.2) SourcePackage: unity UpgradeStatus: Upgraded to oneiric on 2011-10-09 (96 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/916542/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1332444] Re: CH Pedals are not working in 14.04
The systemd side of this is fixed in utopic, closing. The kernel (and main) side keeps open. ** Changed in: systemd (Ubuntu) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1332444 Title: CH Pedals are not working in 14.04 Status in systemd: Fix Released Status in “linux” package in Ubuntu: Confirmed Status in “systemd” package in Ubuntu: Fix Released Bug description: Summary: - The joystick evdev device for the pedals doesn't get proper permissions (in udev/systemd) - The pedal evdev device sometimes doesn't generate evdev events (linux) -- I've created a rule in lib/udev/rules.d as 99-xplane.rules: # CH PRO PEDALS USB KERNEL==event*, ATTRS{idProduct}==00f2, ATTRS{idVendor}==068e, MODE=0666 and even do at every x-plane start: cd /dev/input sudo setfacl --modify u:michael:rw- --modify g::rw- --modify o::rw- * but still my CH Pedals are often not working. (sometimes yes but not always) -- michael@michael-ubuntu:~$ lsb_release -rd Description: Ubuntu 14.04 LTS Release: 14.04 michael@michael-ubuntu:~$ michael@michael-ubuntu:~$ apt-cache policy udev udev: Installed: 204-5ubuntu20.2 Candidate: 204-5ubuntu20.2 Version table: *** 204-5ubuntu20.2 0 500 http://ch.archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 Packages 100 /var/lib/dpkg/status 204-5ubuntu20 0 500 http://ch.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages michael@michael-ubuntu:~$ I expect my CH pedals to work out of the box like on Windows. But even with the above they only work sometimes.- ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: udev 204-5ubuntu20.2 ProcVersionSignature: Ubuntu 3.13.0-29.53-generic 3.13.11.2 Uname: Linux 3.13.0-29-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: Unity Date: Fri Jun 20 09:46:31 2014 InstallationDate: Installed on 2014-04-19 (61 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: ASUS All Series ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=2c43c000-7e14-4304-9dd6-e10fe2810f92 ro SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/19/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1405 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z87-PRO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1405:bd08/19/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ87-PRO:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS --- ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: michael1586 F pulseaudio /dev/snd/controlC0: michael1586 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=82d28a0c-f533-4a45-80f0-6aab843a37b5 InstallationDate: Installed on 2014-04-19 (110 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: ASUS All Series NonfreeKernelModules: nvidia Package: systemd ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=2c43c000-7e14-4304-9dd6-e10fe2810f92 ro ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4 RelatedPackageVersions: linux-restricted-modules-3.13.0-32-generic N/A linux-backports-modules-3.13.0-32-generic N/A linux-firmware 1.127.5 Tags: trusty Uname: Linux 3.13.0-32-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo WifiSyslog: _MarkForUpload: True dmi.bios.date: 08/19/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1405 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z87-PRO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1405:bd08/19/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnZ87-PRO:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version:
[Touch-packages] [Bug 1364584] Re: `getaddrinfo` leaks memory
This bug was fixed in the package eglibc - 2.11.1-0ubuntu7.17 --- eglibc (2.11.1-0ubuntu7.17) lucid-security; urgency=medium * SECURITY REGRESSION: memleak in getaddrinfo (LP: #1364584) - debian/patches/CVE-2013-4357-memleak.patch: fix memleak in sysdeps/posix/getaddrinfo.c introduced by patch for CVE-2013-4357. -- Marc Deslauriers marc.deslauri...@ubuntu.com Thu, 04 Sep 2014 19:55:23 -0400 ** Changed in: eglibc (Ubuntu Lucid) Status: In Progress = Fix Released ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2013-4357 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to eglibc in Ubuntu. https://bugs.launchpad.net/bugs/1364584 Title: `getaddrinfo` leaks memory Status in “eglibc” package in Ubuntu: Invalid Status in “eglibc” source package in Lucid: Fix Released Bug description: I believe 2.11.1-0ubuntu7.14 (Ubuntu 10.04) introduces a regression in `getaddrinfo`. I'm using the test case from [Debian Bug #304022](https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=304022) (attached as main.c). Valgrind detects a leak (output below) that isn't detected if I'm downgrading to 2.11.1-0ubuntu7.13. Upgrading to 2.11.1-0ubuntu7.16 doesn't resolve this. However, I'm unable to reproduce on 2.19-0ubuntu6.3 (Ubuntu 14.04). (The host in the test case yields a NXDOMAIN, but this isn't significant; it seems 1 kB will be leaked per block in any case.) ==7== Memcheck, a memory error detector ==7== Copyright (C) 2002-2009, and GNU GPL'd, by Julian Seward et al. ==7== Using Valgrind-3.6.0.SVN-Debian and LibVEX; rerun with -h for copyright info ==7== Command: ./a.out ==7== ==7== ==7== HEAP SUMMARY: ==7== in use at exit: 1,024 bytes in 1 blocks ==7== total heap usage: 58 allocs, 57 frees, 9,893 bytes allocated ==7== ==7== 1,024 bytes in 1 blocks are definitely lost in loss record 1 of 1 ==7==at 0x4C274A8: malloc (vg_replace_malloc.c:236) ==7==by 0x4EE7EC6: gaih_inet (getaddrinfo.c:858) ==7==by 0x4EEA8F1: getaddrinfo (getaddrinfo.c:2425) ==7==by 0x400606: main (in /tmp/a.out) ==7== ==7== LEAK SUMMARY: ==7==definitely lost: 1,024 bytes in 1 blocks ==7==indirectly lost: 0 bytes in 0 blocks ==7== possibly lost: 0 bytes in 0 blocks ==7==still reachable: 0 bytes in 0 blocks ==7== suppressed: 0 bytes in 0 blocks ==7== ==7== For counts of detected and suppressed errors, rerun with: -v ==7== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 4 from 4) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/1364584/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1247676] Re: [keymap] high scan codes don't work on 32 bit platforms
This is fixed in utopic. ** Changed in: systemd (Ubuntu) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1247676 Title: [keymap] high scan codes don't work on 32 bit platforms Status in “systemd” package in Ubuntu: Fix Released Bug description: In Ubuntu 12.04 64-bit I used the following udev rules to make Plantrinics buttons work: ** ACTION!=add|change, GOTO=xorg_plantronics_end KERNEL!=event*, GOTO=xorg_plantronics_end ENV{ID_VENDOR_ID}==047f, ENV{ID_MODEL_ID}==c013, ENV{ID_INPUT_KEY}=1 ENV{ID_VENDOR_ID}==047f, ENV{ID_MODEL_ID}==c013, RUN+=keymap $name 0xFFA000B1 volumeup 0xFFA000B2 volumedown 0xffa000b5 micmute 0xffa000b7 phone 0xffa000ab unknown LABEL=xorg_plantronics_end ** However there is no keymap (systemd ) since Saucy anymore and setkeycodes can't map such codes as: 0xFFA000B1, 0xFFA000B2, 0xffa000b5, 0xffa000b7, and 0xffa000ab Debian still has keymap even in sid (unstable). Changelog of systemd package in Ubuntu has the following note: ** systemd (204-0ubuntu10) saucy; urgency=low ... - debian/rules: Configure with --disable-keymap to not build/install the old keymap stuff any more. ... ** So keymap is dropped and there is no equivalent replacement yet. Any ideas how to make these buttons work again? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1247676/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366206] Re: Graphical desktop not starting from livesession
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: lightdm (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1366206 Title: Graphical desktop not starting from livesession Status in “lightdm” package in Ubuntu: Confirmed Bug description: Boot live session - choose Try Same issue with at least Xubuntu,Ubuntu and Lubuntu No desktop, black screen - change to vt1 - run loginctl show-seat seat0 gives CanGraphical=no run startx and desktop boots this is in a vm on a machine using nvidia card and 331-updates appears similar to lp:1365336 ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: lightdm 1.11.8-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-13.19-generic 3.16.1 Uname: Linux 3.16.0-13-generic x86_64 ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CasperVersion: 1.343 Date: Fri Sep 5 21:40:54 2014 LiveMediaBuild: Xubuntu 14.10 Utopic Unicorn - Alpha amd64 (20140905.1) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: lightdm UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1366206/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366230] Re: Whitespace causes random character deletions
** Changed in: ubuntu-keyboard (Ubuntu) Assignee: (unassigned) = Michael Sheldon (michael-sheldon) ** Tags added: rtm14 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1366230 Title: Whitespace causes random character deletions Status in Ubuntu Keyboard: New Status in “ubuntu-keyboard” package in Ubuntu: Confirmed Bug description: Frustrating bug that has been around since I started dogfooding ubuntu on my nexus 4 - somwhere around the 180 image mark. Am currently running devel-proposed 223 on mako. Have tested this in multiple apps, including the default Notes, Quick Memo, Touchwriter - all have the same issue. Typing and deletion work fine initally, until I create an empty line - see below for an example: Example--- Here I'm typing a usual line... about to make a space Here I'm typing after the space, etc. ---End Example-- When I go back to edit the first line, as soon as I delete characters at the end of the line, the line below jumps up, and deletes a number of those characters. See below for the example: Example--- Here I'm typing a usual line... about to make ae I'm typing after the space, etc. ---End Example-- This makes storing notes on the device, and any editing with the keyboard, extremely difficult. I notice this only seems to happen when there is whitespace in between lines - otherwise keyboard is fine. I'm filing this report as a keyboard bug, as it's the only linking thread I can see between these programs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-keyboard/+bug/1366230/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366772] [NEW] 5.3.1 upload prevents building of certain packages
Public bug reported: The https://launchpad.net/ubuntu/+source/qtxmlpatterns-opensource- src/5.3.1-4ubuntu1 uploaded breaks some builds: https://launchpadlibrarian.net/184302347/buildlog_ubuntu-utopic- armhf.libusermetrics_1.1.1%2B14.10.20140908-0ubuntu1_FAILEDTOBUILD.txt.gz Qt does checking of version numbers of some the modules, so in case mixing such modules either the patches wanted should be backported or the reported module version forced to be the same as the main version of the Qt release (in this case, we're still at 5.3.0). ** Affects: qtxmlpatterns-opensource-src (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtxmlpatterns-opensource- src in Ubuntu. https://bugs.launchpad.net/bugs/1366772 Title: 5.3.1 upload prevents building of certain packages Status in “qtxmlpatterns-opensource-src” package in Ubuntu: New Bug description: The https://launchpad.net/ubuntu/+source/qtxmlpatterns-opensource- src/5.3.1-4ubuntu1 uploaded breaks some builds: https://launchpadlibrarian.net/184302347/buildlog_ubuntu-utopic- armhf.libusermetrics_1.1.1%2B14.10.20140908-0ubuntu1_FAILEDTOBUILD.txt.gz Qt does checking of version numbers of some the modules, so in case mixing such modules either the patches wanted should be backported or the reported module version forced to be the same as the main version of the Qt release (in this case, we're still at 5.3.0). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtxmlpatterns-opensource-src/+bug/1366772/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1353362] Re: cairo needs merge from debian
this merge needs probably a weston sync and a webkitgtk merge. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1353362 Title: cairo needs merge from debian Status in “cairo” package in Ubuntu: New Bug description: Some changes in debian, but not (obviously merged in ubuntu since the packaging is different) needs manual merge http://anonscm.debian.org/cgit/collab-maint/cairo.git/commit/debian/control?id=0d4aad4798725a9fb99450091dfdf3cc4b34dd63 is currently causing a FTBFS https://launchpad.net/ubuntu/+source/wxpython3.0/3.0.0.0+dfsg-1 (due to a probabile wxwidgets3.0 bug) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cairo/+bug/1353362/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1353362] Re: cairo needs merge from debian
Updated debdiff, against the latest debian release. Note: debian has disabled GL again. ** Attachment added: debdiff-v2 https://bugs.launchpad.net/ubuntu/+source/cairo/+bug/1353362/+attachment/4198425/+files/debdiff-v2 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1353362 Title: cairo needs merge from debian Status in “cairo” package in Ubuntu: New Bug description: Some changes in debian, but not (obviously merged in ubuntu since the packaging is different) needs manual merge http://anonscm.debian.org/cgit/collab-maint/cairo.git/commit/debian/control?id=0d4aad4798725a9fb99450091dfdf3cc4b34dd63 is currently causing a FTBFS https://launchpad.net/ubuntu/+source/wxpython3.0/3.0.0.0+dfsg-1 (due to a probabile wxwidgets3.0 bug) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cairo/+bug/1353362/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1357321] Re: scope images do not load in HSDPA or 3G
if the scopes are confined then we need to change the QPA plugin to use connectivity-service instead of NM to get the networking status changes. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtubuntu in Ubuntu. https://bugs.launchpad.net/bugs/1357321 Title: scope images do not load in HSDPA or 3G Status in The Savilerow project: New Status in The Unity 8 shell: Opinion Status in “qtubuntu” package in Ubuntu: New Bug description: scope images load fine in wifi, but not on hsdpa even when there is good connectivity and browsing works well. Results are return, but images do not load. To manage notifications about this bug go to: https://bugs.launchpad.net/savilerow/+bug/1357321/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1353362] Re: cairo needs merge from debian
debdiff against webkitgtk ** Patch added: webkitgtk.debdiff https://bugs.launchpad.net/ubuntu/+source/cairo/+bug/1353362/+attachment/4198435/+files/webkitgtk.debdiff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1353362 Title: cairo needs merge from debian Status in “cairo” package in Ubuntu: New Bug description: Some changes in debian, but not (obviously merged in ubuntu since the packaging is different) needs manual merge http://anonscm.debian.org/cgit/collab-maint/cairo.git/commit/debian/control?id=0d4aad4798725a9fb99450091dfdf3cc4b34dd63 is currently causing a FTBFS https://launchpad.net/ubuntu/+source/wxpython3.0/3.0.0.0+dfsg-1 (due to a probabile wxwidgets3.0 bug) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cairo/+bug/1353362/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1353362] Re: cairo needs merge from debian
debdiff against webkitgtk ** Patch added: webkitgtk.debdiff https://bugs.launchpad.net/ubuntu/+source/cairo/+bug/1353362/+attachment/4198436/+files/webkitgtk.debdiff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1353362 Title: cairo needs merge from debian Status in “cairo” package in Ubuntu: New Bug description: Some changes in debian, but not (obviously merged in ubuntu since the packaging is different) needs manual merge http://anonscm.debian.org/cgit/collab-maint/cairo.git/commit/debian/control?id=0d4aad4798725a9fb99450091dfdf3cc4b34dd63 is currently causing a FTBFS https://launchpad.net/ubuntu/+source/wxpython3.0/3.0.0.0+dfsg-1 (due to a probabile wxwidgets3.0 bug) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cairo/+bug/1353362/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366772] Re: 5.3.1 upload prevents building of certain packages
Indeed, that was my fault, uploaded a fix. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtxmlpatterns-opensource- src in Ubuntu. https://bugs.launchpad.net/bugs/1366772 Title: 5.3.1 upload prevents building of certain packages Status in “qtxmlpatterns-opensource-src” package in Ubuntu: New Bug description: The https://launchpad.net/ubuntu/+source/qtxmlpatterns-opensource- src/5.3.1-4ubuntu1 uploaded breaks some builds: https://launchpadlibrarian.net/184302347/buildlog_ubuntu-utopic- armhf.libusermetrics_1.1.1%2B14.10.20140908-0ubuntu1_FAILEDTOBUILD.txt.gz Qt does checking of version numbers of some the modules, so in case mixing such modules either the patches wanted should be backported or the reported module version forced to be the same as the main version of the Qt release (in this case, we're still at 5.3.0). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtxmlpatterns-opensource-src/+bug/1366772/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366777] [NEW] qmlscene crashed while running music-app autopilot tests
Public bug reported: music-app tests could not succeed due to qmlscene crash http://ci.ubuntu.com/smokeng/utopic/touch/mako/222:20140904.1:20140903.1/10220/music_app/ _StringException: Binary content: FailedTestScreenshot (image/png) /var/log/syslog: {{{Sep 5 00:59:45 ubuntu-phablet kernel: [ 86.241416] input: autopilot-finger as /devices/virtual/input/input6}}} Application Log (com.ubuntu.music_music_1.3.611): {{{ /usr/lib/arm-linux-gnueabihf/qt5/bin/qmlscene: unrecognized option '--url=' /usr/lib/arm-linux-gnueabihf/qt5/bin/qmlscene: invalid option -- 'I' Testability driver loaded. Wire protocol version is 1.4. Could not create thumbnailer: Unknown error when checking cache access: Is a directory Failed to register thumbnailer image provider: Unknown error when checking cache access: Is a directory terminate called after throwing an instance of 'std::runtime_error' what(): Tried to open a db with an unsupported schema version. }}} test-log: {{{ 00:59:45.372 WARNING testcase:115 - No tracing available - install the python-autopilot-trace package! 00:59:45.627 WARNING testcase:162 - Process manager backend unavailable, application snapshot support disabled. 00:59:45.691 INFO logging:45 - str: Set the value of an initctl environment variable. Arguments ('/home/phablet/autopilot/fakeenv/tmp8mgdb_gk',). Keyword arguments: {}. 00:59:45.712 DEBUG __init__:174 - Patched home to fake home directory /home/phablet/autopilot/fakeenv/tmp8mgdb_gk 00:59:45.713 DEBUG __init__:178 - Creating music library for click test 00:59:45.714 DEBUG __init__:179 - Home set to /home/phablet/autopilot/fakeenv/tmp8mgdb_gk 00:59:45.714 DEBUG __init__:181 - Music path set to /home/phablet/autopilot/fakeenv/tmp8mgdb_gk/Music 00:59:45.715 DEBUG __init__:186 - Mediascanner path set to /home/phablet/autopilot/fakeenv/tmp8mgdb_gk/.cache/mediascanner-2.0 00:59:45.716 DEBUG __init__:192 - Content dir set to /home/phablet/autopilot/music_app/content 00:59:45.819 DEBUG __init__:201 - Music copied, files ['1.ogg', '2.ogg', '3.mp3'] 00:59:45.820 DEBUG __init__:214 - Patching fake mediascanner database in /home/phablet/autopilot/fakeenv/tmp8mgdb_gk/.cache/mediascanner-2.0 00:59:45.820 DEBUG __init__:217 - Mediascanner database files ['mediastore.sql', 'mediastore.db'] 00:59:45.904 DEBUG __init__:207 - Mediascanner database copied, files ['mediastore.sql', 'mediastore.db'] 00:59:45.906 INFO logging:45 - TestMainWindow: launch_test_click. Arguments (). Keyword arguments: {}. 00:59:45.907 INFO _launcher:280 - Attempting to launch click application '(default)' from click package 'com.ubuntu.music' and URIs '' 00:59:46.691 INFO _launcher:120 - Attempting to launch application 'com.ubuntu.music_music_1.3.611' with URIs '' via upstart-app-launch 01:00:13.601 ERROR proxies:410 - Introspect error on :1.96:/com/canonical/Autopilot/Introspection: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) 01:00:13.602 DEBUG proxies:413 - Executing introspect queue due to error 01:00:36.491 ERROR _launcher:206 - Timed out waiting for Application with app_id 'com.ubuntu.music_music_1.3.611' to stop. 01:00:36.498 INFO logging:45 - str: Set the value of an initctl environment variable. Arguments ('/home/phablet',). Keyword arguments: {}. }}} Traceback (most recent call last): File /home/phablet/autopilot/music_app/tests/test_music.py, line 26, in setUp super(TestMainWindow, self).setUp() File /home/phablet/autopilot/music_app/tests/__init__.py, line 255, in setUp self.app = MusicApp(launcher_method()) File /usr/lib/python3/dist-packages/autopilot/logging.py, line 46, in inner return f(instance, *args, **kwargs) File /home/phablet/autopilot/music_app/tests/__init__.py, line 92, in launch_test_click emulator_base=ubuntuuitoolkit.UbuntuUIToolkitCustomProxyObjectBase) File /usr/lib/python3/dist-packages/autopilot/testcase.py, line 310, in launch_click_package return launcher.launch(package_id, app_name, app_uris) File /usr/lib/python3/dist-packages/autopilot/application/_launcher.py, line 283, in launch return super().launch(app_id, app_uris) File /usr/lib/python3/dist-packages/autopilot/application/_launcher.py, line 146, in launch pid=pid File /usr/lib/python3/dist-packages/autopilot/introspection/_search.py, line 176, in get_proxy_object_for_existing_process _get_search_criteria_string_representation(**kwargs) File /usr/lib/python3/dist-packages/autopilot/introspection/_search.py, line 375, in _raise_if_not_single_result (criteria_string) autopilot.exceptions.ProcessSearchError: Search criteria (object path = '/com/canonical/Autopilot/Introspection', pid = 3292) returned no results ** Affects: qtdeclarative-opensource-src (Ubuntu) Importance: Undecided Status: New ** Attachment added: _usr_lib_arm-linux-gnueabihf_qt5_bin_qmlscene.32011.crash
[Touch-packages] [Bug 1366772] Re: 5.3.1 upload prevents building of certain packages
** Branch linked: lp:ubuntu/utopic-proposed/qtxmlpatterns-opensource-src -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtxmlpatterns-opensource- src in Ubuntu. https://bugs.launchpad.net/bugs/1366772 Title: 5.3.1 upload prevents building of certain packages Status in “qtxmlpatterns-opensource-src” package in Ubuntu: New Bug description: The https://launchpad.net/ubuntu/+source/qtxmlpatterns-opensource- src/5.3.1-4ubuntu1 uploaded breaks some builds: https://launchpadlibrarian.net/184302347/buildlog_ubuntu-utopic- armhf.libusermetrics_1.1.1%2B14.10.20140908-0ubuntu1_FAILEDTOBUILD.txt.gz Qt does checking of version numbers of some the modules, so in case mixing such modules either the patches wanted should be backported or the reported module version forced to be the same as the main version of the Qt release (in this case, we're still at 5.3.0). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtxmlpatterns-opensource-src/+bug/1366772/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1357945] Re: [bottom edge] Current bottom edge hint timeout makes it difficult to read the bottom edge action
** Changed in: ubuntu-clock-app Status: New = Triaged -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to dialer-app in Ubuntu. https://bugs.launchpad.net/bugs/1357945 Title: [bottom edge] Current bottom edge hint timeout makes it difficult to read the bottom edge action Status in Address Book App: New Status in Dialer app for Ubuntu Touch: Triaged Status in Quick Memo: Triaged Status in Clock application for Ubuntu devices: Triaged Status in Ubuntu UX bugs: Fix Committed Status in “address-book-app” package in Ubuntu: New Status in “dialer-app” package in Ubuntu: New Bug description: Currently when you open the address book, dialer app, clock app etc, the bottom edge hint is visible and shows what the action is. This hint is hidden after a few seconds. This makes it difficult for the user to understand what the bottom edge does if he didn't read the bottom edge text in time. In the clock app design at https://docs.google.com/presentation/d/1Kkl7xT8BYo9mT8i3IXh6rPrDlNg6cBxTajahlRYIGlI/edit#slide=id.g18587dd40_029 (Slide 4), the bottom edge text is supposed to show the time to the next alarm. By hiding this hint, it renders that text useless since it is hidden. -- Solution -- - Hint tab is always displayed by default - When interacting with the content on screen it collapses (e.g. dialler - typing numbers, address book, clock - scrolling) - When user stops interacting, it reappears after 5 seconds https://docs.google.com/a/canonical.com/presentation/d /1YuB3SW5UKI5t9ox4Gc9snsOnFAr1j0PTFjbtK- eLO8w/edit#slide=id.g386935507_0225 To manage notifications about this bug go to: https://bugs.launchpad.net/address-book-app/+bug/1357945/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1276658] Re: Add offline cache
The attachment appSpecificTileCache.diff seems to be a patch. If it isn't, please remove the patch flag from the attachment, remove the patch tag, and if you are a member of the ~ubuntu-reviewers, unsubscribe the team. [This is an automated message performed by a Launchpad user owned by ~brian-murray, for any issues please contact him.] ** Tags added: patch -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtlocation-opensource-src in Ubuntu. https://bugs.launchpad.net/bugs/1276658 Title: Add offline cache Status in “qtlocation-opensource-src” package in Ubuntu: In Progress Bug description: The app should be able to cache downloaded tiles to be used in future runs of the app. In contrast to the download tile pack feature, that allows downloading a region before going on holiday; this would provide faster viewing of previously viewed areas especially when the user has poor signal, as well as less bandwidth usage etc. At present, the QML component caches downloaded tiles while the app is running, but upon closing the app this is all forgotten, and it must download from scratch again the next time it is loaded. So, tiles should be stored in a permanent cache, so that it is not required to download them everytime the app is started. Note: Similar apps allow the user to specify the size of the cache, to meet their requirements. So, they can set the cache size to 1MB or 500MB etc. depending on their needs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtlocation-opensource-src/+bug/1276658/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1365408] Re: Should ship a PNG icon instead of using the theme
Thanks Michał, do you know in what directory we should install those icons? /usr/share/pixmaps or in the icon theme? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mediaplayer-app in Ubuntu. https://bugs.launchpad.net/bugs/1365408 Title: Should ship a PNG icon instead of using the theme Status in Ubuntu UX bugs: New Status in “address-book-app” package in Ubuntu: New Status in “dialer-app” package in Ubuntu: New Status in “mediaplayer-app” package in Ubuntu: New Status in “messaging-app” package in Ubuntu: New Status in “sync-monitor” package in Ubuntu: New Status in “ubuntu-system-settings” package in Ubuntu: New Status in “webbrowser-app” package in Ubuntu: New Bug description: By design request, all apps, click or not, should ship their own icon as PNG instead of using icons from the theme. Please download the respective icon from http://bazaar.launchpad.net /~ubuntu-art-pkg/ubuntu-themes/trunk/files/head:/suru-icons/apps/256/ and include in your packages. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-ux/+bug/1365408/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1362184] Re: File Deletion
*** This bug is a duplicate of bug 1301846 *** https://bugs.launchpad.net/bugs/1301846 ** This bug has been marked a duplicate of bug 1301846 loginctl crashed with SIGABRT -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1362184 Title: File Deletion Status in “systemd” package in Ubuntu: New Bug description: Having installed Kubuntu 14.4 and spotting rogue track on Amarok, then deleted rogue track and discovered all Music and other important personal files in folders with 777 permissions all deleted. Gulp. ProblemType: Crash DistroRelease: Ubuntu 14.10 Package: systemd 208-8ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4 Uname: Linux 3.13.0-34-generic i686 NonfreeKernelModules: wl ApportVersion: 2.14.6-0ubuntu2 Architecture: i386 Date: Tue Aug 26 18:13:24 2014 ExecutablePath: /lib/systemd/systemd-logind InstallationDate: Installed on 2012-06-09 (808 days ago) InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release i386 (20120423) ProcCmdline: /lib/systemd/systemd-logind ProcEnviron: Signal: 6 SourcePackage: systemd StacktraceTop: ?? () ?? () ?? () ?? () ?? () Title: systemd-logind crashed with SIGABRT UpgradeStatus: Upgraded to utopic on 2014-08-26 (0 days ago) UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1362184/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1336715] Re: switch-items in indicators sometimes get out of sync with system-settings
** Summary changed: - switch-items in indicators sometimes get out of sync + switch-items in indicators sometimes get out of sync with system-settings -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1336715 Title: switch-items in indicators sometimes get out of sync with system- settings Status in Indicator Location: New Status in Network Menu: Confirmed Status in The Unity 8 shell: Incomplete Status in “unity8” package in Ubuntu: New Bug description: I noticed when testing flightmode with indicator-network that the switch items sometimes get out of sync from what GActions states on dbus are and stop updating their states when action states on dbus change. This seems to happen randomly and I have no procedure to reproduce reliably. To manage notifications about this bug go to: https://bugs.launchpad.net/indicator-location/+bug/1336715/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366799] [NEW] enable copying the stacktrace to clipboard or to export details to a file
Public bug reported: I am debugging a custom Java application with native code (i.e. a shared library via JNI). Not surprisingly, it crashes somewhere. Apport shows me the stacktrace which is very nice. I would like to be able to right click and copy to clipboard so that I can file a bug with the library in question. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: apport 2.14.1-0ubuntu3.3 Uname: Linux 3.14.0-031400rc4-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CurrentDesktop: GNOME Date: Mon Sep 8 14:57:12 2014 InstallationDate: Installed on 2014-01-22 (228 days ago) InstallationMedia: Ubuntu-GNOME 13.10 Saucy Salamander - Release amd64 (20131017) PackageArchitecture: all SourcePackage: apport UpgradeStatus: Upgraded to trusty on 2014-07-01 (69 days ago) modified.conffile..etc.apport.crashdb.conf: [modified] mtime.conffile..etc.apport.crashdb.conf: 2014-01-22T21:16:50.46 ** Affects: apport (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1366799 Title: enable copying the stacktrace to clipboard or to export details to a file Status in “apport” package in Ubuntu: New Bug description: I am debugging a custom Java application with native code (i.e. a shared library via JNI). Not surprisingly, it crashes somewhere. Apport shows me the stacktrace which is very nice. I would like to be able to right click and copy to clipboard so that I can file a bug with the library in question. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: apport 2.14.1-0ubuntu3.3 Uname: Linux 3.14.0-031400rc4-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CurrentDesktop: GNOME Date: Mon Sep 8 14:57:12 2014 InstallationDate: Installed on 2014-01-22 (228 days ago) InstallationMedia: Ubuntu-GNOME 13.10 Saucy Salamander - Release amd64 (20131017) PackageArchitecture: all SourcePackage: apport UpgradeStatus: Upgraded to trusty on 2014-07-01 (69 days ago) modified.conffile..etc.apport.crashdb.conf: [modified] mtime.conffile..etc.apport.crashdb.conf: 2014-01-22T21:16:50.46 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1366799/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366801] [NEW] Border in count emblem in alt+tab switcher is misaligned
Public bug reported: See the attached screenshot, there seems to be a shift of the emblem background, as well as vertical misalignment of the text. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: unity 7.3.1+14.10.20140904-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-12.18-generic 3.16.1 Uname: Linux 3.16.0-12-generic x86_64 NonfreeKernelModules: wl nvidia ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CurrentDesktop: Unity Date: Mon Sep 8 14:59:38 2014 SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: unity Importance: Medium Assignee: Marco Trevisan (Treviño) (3v1n0) Status: Confirmed ** Affects: unity (Ubuntu) Importance: Medium Assignee: Marco Trevisan (Treviño) (3v1n0) Status: Confirmed ** Tags: amd64 apport-bug utopic ** Attachment added: unity7-count-emblem.png https://bugs.launchpad.net/bugs/1366801/+attachment/4198513/+files/unity7-count-emblem.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/1366801 Title: Border in count emblem in alt+tab switcher is misaligned Status in Unity: Confirmed Status in “unity” package in Ubuntu: Confirmed Bug description: See the attached screenshot, there seems to be a shift of the emblem background, as well as vertical misalignment of the text. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: unity 7.3.1+14.10.20140904-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-12.18-generic 3.16.1 Uname: Linux 3.16.0-12-generic x86_64 NonfreeKernelModules: wl nvidia ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CurrentDesktop: Unity Date: Mon Sep 8 14:59:38 2014 SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1366801/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366801] Re: Border in count emblem in alt+tab switcher is misaligned
** Changed in: unity (Ubuntu) Status: New = Confirmed ** Changed in: unity (Ubuntu) Assignee: (unassigned) = Marco Trevisan (Treviño) (3v1n0) ** Changed in: unity (Ubuntu) Importance: Undecided = Medium ** Changed in: unity Importance: Undecided = Medium ** Changed in: unity Status: New = Confirmed ** Changed in: unity Assignee: (unassigned) = Marco Trevisan (Treviño) (3v1n0) ** Changed in: unity Milestone: None = 7.3.1 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/1366801 Title: Border in count emblem in alt+tab switcher is misaligned Status in Unity: Confirmed Status in “unity” package in Ubuntu: Confirmed Bug description: See the attached screenshot, there seems to be a shift of the emblem background, as well as vertical misalignment of the text. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: unity 7.3.1+14.10.20140904-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-12.18-generic 3.16.1 Uname: Linux 3.16.0-12-generic x86_64 NonfreeKernelModules: wl nvidia ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CurrentDesktop: Unity Date: Mon Sep 8 14:59:38 2014 SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1366801/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366314] Re: security issue? auto suggest seems to copy credentials into clipboard
It does seem that the keyboard shouldn't be putting whatever you type into the clipboard. That said, I wonder if this is also a bug in the terminal app? Maybe it isn't using these: Qt.ImhHiddenText - Characters should be hidden, as is typically used when entering passwords. This is automatically set when setting echoMode to TextInput.Password. Qt.ImhSensitiveData - Typed text should not be stored by the active input method in any persistent storage like predictive user dictionary. Note, AIUI, the filemanager app uses the same embedded password checking backend as the terminal so it may be affected too. Reference: http://people.canonical.com/~dpm/sdk-docs/html.orig/qml-ubuntu-components0-textfield.html -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1366314 Title: security issue? auto suggest seems to copy credentials into clipboard Status in “ubuntu-keyboard” package in Ubuntu: New Bug description: on todays image (krillin rtm-proposed r21) with ONLY auto suggest language option on I get: 13:57 asac 1. kill terminal 13:57 asac 2. open terminal and enter pin 13:57 asac 3. click in terminal pastes my pin :) obviously not good for security. Think might be bad. Seems its not getting to dictionary at least: 13:58 asac 4. /me uses backspace to delete 13:58 asac 5. type ls 13:58 asac 6. type first digit of pin - does not suggest my pin This doesn't happen if I turn auto suggestion off. Not sure if the paste is what doesn't happen or the clipboarding doesn't happen. Surely important to check out and know for sure. We should check other credential prompts too: pin lock screen, sim pin etc. Haven't tried, but I assume UITK password fields and browser dont have that, but might be worth checking. Thanks! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-keyboard/+bug/1366314/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366805] [NEW] Can't login to Unity Next
Public bug reported: When I try to login to Unity Next the system-compositor seems to crash immediately. I'm using Ubuntu Next on VirtualBox. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: ubuntu-desktop-mir (not installed) ProcVersionSignature: Ubuntu 3.16.0-14.20-generic 3.16.2 Uname: Linux 3.16.0-14-generic x86_64 ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 Date: Mon Sep 8 15:10:15 2014 GraphicsCard: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller]) InstallationDate: Installed on 2014-07-09 (61 days ago) InstallationMedia: Ubuntu-Desktop-Next 14.10 Utopic Unicorn - Alpha amd64 (20140708) SourcePackage: unity-system-compositor SystemImageInfo: current build number: 0 device name: channel: daily last update: Unknown UnitySystemCompositorLog: Warning: ignoring unrecognised arguments: ERROR: /build/buildd/mir-0.7.0+14.10.20140829/src/platform/graphics/mesa/display_helpers.cpp(242): Throw in function int mir::graphics::mesa::helpers::DRMHelper::open_drm_device(const std::shared_ptrmir::udev::Context) Dynamic exception type: N5boost16exception_detail10clone_implINS0_19error_info_injectorISt13runtime_error std::exception::what: Error opening DRM device 123, No medium found UnitySystemCompositorLogOld: Warning: ignoring unrecognised arguments: ERROR: /build/buildd/mir-0.7.0+14.10.20140829/src/platform/graphics/mesa/display_helpers.cpp(242): Throw in function int mir::graphics::mesa::helpers::DRMHelper::open_drm_device(const std::shared_ptrmir::udev::Context) Dynamic exception type: N5boost16exception_detail10clone_implINS0_19error_info_injectorISt13runtime_error std::exception::what: Error opening DRM device 123, No medium found UpgradeStatus: No upgrade log present (probably fresh install) version.libdrm: libdrm2 2.4.56-1 version.lightdm: lightdm 1.11.8-0ubuntu1 version.mesa: libegl1-mesa-dev N/A ** Affects: unity-system-compositor (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug utopic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-system-compositor in Ubuntu. https://bugs.launchpad.net/bugs/1366805 Title: Can't login to Unity Next Status in “unity-system-compositor” package in Ubuntu: New Bug description: When I try to login to Unity Next the system-compositor seems to crash immediately. I'm using Ubuntu Next on VirtualBox. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: ubuntu-desktop-mir (not installed) ProcVersionSignature: Ubuntu 3.16.0-14.20-generic 3.16.2 Uname: Linux 3.16.0-14-generic x86_64 ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 Date: Mon Sep 8 15:10:15 2014 GraphicsCard: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller]) InstallationDate: Installed on 2014-07-09 (61 days ago) InstallationMedia: Ubuntu-Desktop-Next 14.10 Utopic Unicorn - Alpha amd64 (20140708) SourcePackage: unity-system-compositor SystemImageInfo: current build number: 0 device name: channel: daily last update: Unknown UnitySystemCompositorLog: Warning: ignoring unrecognised arguments: ERROR: /build/buildd/mir-0.7.0+14.10.20140829/src/platform/graphics/mesa/display_helpers.cpp(242): Throw in function int mir::graphics::mesa::helpers::DRMHelper::open_drm_device(const std::shared_ptrmir::udev::Context) Dynamic exception type: N5boost16exception_detail10clone_implINS0_19error_info_injectorISt13runtime_error std::exception::what: Error opening DRM device 123, No medium found UnitySystemCompositorLogOld: Warning: ignoring unrecognised arguments: ERROR: /build/buildd/mir-0.7.0+14.10.20140829/src/platform/graphics/mesa/display_helpers.cpp(242): Throw in function int mir::graphics::mesa::helpers::DRMHelper::open_drm_device(const std::shared_ptrmir::udev::Context) Dynamic exception type: N5boost16exception_detail10clone_implINS0_19error_info_injectorISt13runtime_error std::exception::what: Error opening DRM device 123, No medium found UpgradeStatus: No upgrade log present (probably fresh install) version.libdrm: libdrm2 2.4.56-1 version.lightdm: lightdm 1.11.8-0ubuntu1 version.mesa: libegl1-mesa-dev N/A To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-system-compositor/+bug/1366805/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366206] Re: Graphical desktop not starting from livesession
** Attachment added: x/l/ubuntu desktops show-seat https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1366206/+attachment/4198520/+files/broken%20desktops.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1366206 Title: Graphical desktop not starting from livesession Status in “lightdm” package in Ubuntu: Confirmed Bug description: Boot live session - choose Try Same issue with at least Xubuntu,Ubuntu and Lubuntu No desktop, black screen - change to vt1 - run loginctl show-seat seat0 gives CanGraphical=no run startx and desktop boots this is in a vm on a machine using nvidia card and 331-updates appears similar to lp:1365336 ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: lightdm 1.11.8-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-13.19-generic 3.16.1 Uname: Linux 3.16.0-13-generic x86_64 ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CasperVersion: 1.343 Date: Fri Sep 5 21:40:54 2014 LiveMediaBuild: Xubuntu 14.10 Utopic Unicorn - Alpha amd64 (20140905.1) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: lightdm UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1366206/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1349309] Re: Require special menu type for settings menus
** Changed in: unity8 Importance: Undecided = Medium ** Changed in: unity8 (Ubuntu) Importance: Undecided = Medium ** No longer affects: unity8 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1349309 Title: Require special menu type for settings menus Status in Bluetooth Menu: Triaged Status in The Date and Time Indicator: Triaged Status in Network Menu: Triaged Status in The Power Indicator: Triaged Status in Sound Menu: New Status in “unity8” package in Ubuntu: Confirmed Bug description: The settings menus should have a custom type so that we can specialize them in the UI. com.canonical.indicator.link Attached image to show what design want. To manage notifications about this bug go to: https://bugs.launchpad.net/indicator-bluetooth/+bug/1349309/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366772] Re: 5.3.1 upload prevents building of certain packages
This bug was fixed in the package qtxmlpatterns-opensource-src - 5.3.1-4ubuntu3 --- qtxmlpatterns-opensource-src (5.3.1-4ubuntu3) utopic; urgency=medium * Downgrade the version in two more places. -- Dmitry Shachnev mity...@ubuntu.com Mon, 08 Sep 2014 16:16:05 +0400 ** Changed in: qtxmlpatterns-opensource-src (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtxmlpatterns-opensource- src in Ubuntu. https://bugs.launchpad.net/bugs/1366772 Title: 5.3.1 upload prevents building of certain packages Status in “qtxmlpatterns-opensource-src” package in Ubuntu: Fix Released Bug description: The https://launchpad.net/ubuntu/+source/qtxmlpatterns-opensource- src/5.3.1-4ubuntu1 uploaded breaks some builds: https://launchpadlibrarian.net/184302347/buildlog_ubuntu-utopic- armhf.libusermetrics_1.1.1%2B14.10.20140908-0ubuntu1_FAILEDTOBUILD.txt.gz Qt does checking of version numbers of some the modules, so in case mixing such modules either the patches wanted should be backported or the reported module version forced to be the same as the main version of the Qt release (in this case, we're still at 5.3.0). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtxmlpatterns-opensource-src/+bug/1366772/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1303516] Re: ubiquity crashed with SIGSEGV in _int_malloc()
** Changed in: harfbuzz Importance: Unknown = Undecided ** Changed in: harfbuzz Status: Unknown = New ** Changed in: harfbuzz Remote watch: freedesktop.org Bugzilla #75076 = None -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to harfbuzz in Ubuntu. https://bugs.launchpad.net/bugs/1303516 Title: ubiquity crashed with SIGSEGV in _int_malloc() Status in HarfBuzz: New Status in “graphite2” package in Ubuntu: Invalid Status in “harfbuzz” package in Ubuntu: Fix Released Status in “graphite2” source package in Trusty: Invalid Status in “harfbuzz” source package in Trusty: Fix Committed Bug description: [ Description ] Memory corruption when rendering Myanmar text leeds to a crash [ Test case ] IMPORTANT NOTE: below will modify currently running locale/keyboard be prepared to restore it, e.g. by enabling keyboard indicator to change keyboard back to normal. 1. Install ubiquity on a desktop or boot from an ISO $ sudo apt-get install ubiquity-frontend-gtk 2. If you run on a desktop start ubiquity with: $ ubiquity --greeter 3. Scroll to the bottom of the language list, click on 5th or 4th from the bottom ACTUAL RESULT python3 segmentation fault: *** Error in `/usr/bin/python3': malloc(): memory corruption: 0x03b33d80 *** Segmentation fault (core dumped) EXPECTED RESULT No crash [ QA ] Check that the test case doesn't crash after applying the SRU [ Original Report ] I was testing a daily imagine of Ubuntu Gnome 14.04 (Live Image test), and was just checking out the languages on the initial boot up. When i was trying to click on the 4th language from the bottom ubiquitity crashed to give me this error. ProblemType: Crash DistroRelease: Ubuntu 14.04 Package: ubiquity 2.17.10 ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8 Uname: Linux 3.13.0-23-generic x86_64 ApportVersion: 2.14.1-0ubuntu1 Architecture: amd64 CasperVersion: 1.339 Date: Mon Apr 7 00:06:38 2014 ExecutablePath: /usr/lib/ubiquity/bin/ubiquity InstallCmdLine: file=/cdrom/preseed/ubuntu-gnome.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity InterpreterPath: /usr/bin/python3.4 LiveMediaBuild: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Daily amd64 (20140406) ProcCmdline: /usr/bin/python3 /usr/lib/ubiquity/bin/ubiquity --greeter --only ProcEnviron: TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SegvAnalysis: Segfault happened at: 0x7f3d8a71dd71 _int_malloc+689: mov %r14,0x10(%r9) PC (0x7f3d8a71dd71) ok source %r14 ok destination 0x10(%r9) (0x18001210) not located in a known VMA region (needed writable region)! SegvReason: writing unknown VMA Signal: 11 SourcePackage: ubiquity StacktraceTop: _int_malloc (av=0x7f3d8aa5c760 main_arena, bytes=1824) at malloc.c:3489 __GI___libc_malloc (bytes=1824) at malloc.c:2891 ?? () from /usr/lib/x86_64-linux-gnu/libgraphite2.so.3 gr_make_font_with_ops () from /usr/lib/x86_64-linux-gnu/libgraphite2.so.3 gr_make_font_with_advance_fn () from /usr/lib/x86_64-linux-gnu/libgraphite2.so.3 Title: ubiquity crashed with SIGSEGV in _int_malloc() UpgradeStatus: No upgrade log present (probably fresh install) UpstartUbiquity: debconf: DbDriver templatedb: /var/cache/debconf/templates.dat is locked by another process: Resource temporarily unavailable UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/harfbuzz/+bug/1303516/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1330443] Re: Add more keyboard layouts
Can someone please explain why it's possible to add Dvorak keyboards and all but I've been stuck with this question about how to add a new keyboard for months now? https://answers.launchpad.net/ubuntu/+source /ubuntu-keyboard/+question/249345 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1330443 Title: Add more keyboard layouts Status in “ubuntu-keyboard” package in Ubuntu: New Bug description: Please add support for Keyboard layouts like: Colemak, Dvorak etc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-keyboard/+bug/1330443/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1351042] Re: MTP is unusable on Nexus 4 connected to Windows host
** Tags added: touch-2014-09-12 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mtp in Ubuntu. https://bugs.launchpad.net/bugs/1351042 Title: MTP is unusable on Nexus 4 connected to Windows host Status in “mtp” package in Ubuntu: In Progress Bug description: Files copied over MTP are shown duplicated on Windows. Steps to reproduce: - Windows PC-Control Panel-Device Manager - Nexus 4 is shown under Portable devices - Right click on Nexus 4, choose Update Driver - click 'Browse my Computer for driver software' - click Let my pick... - select MTP USB Device Windows installs MTP USB Device driver. Unplug and plug USB cable back in. Nexus 4 device will appear in Windows Explorer. - Attempt to copy a file to a directory. Click on Nexus 4 in Windows Explorer, try to copy a file to the filesystem. A copied file appears duplicated. Expected result: Files are shown and can be copied, deleted on the device. Only one entry is displayed for each copied file. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mtp/+bug/1351042/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1365408] Re: Should ship a PNG icon instead of using the theme
As far as I can tell, in your own data dir. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mediaplayer-app in Ubuntu. https://bugs.launchpad.net/bugs/1365408 Title: Should ship a PNG icon instead of using the theme Status in Ubuntu UX bugs: New Status in “address-book-app” package in Ubuntu: New Status in “dialer-app” package in Ubuntu: New Status in “mediaplayer-app” package in Ubuntu: New Status in “messaging-app” package in Ubuntu: New Status in “sync-monitor” package in Ubuntu: New Status in “ubuntu-system-settings” package in Ubuntu: New Status in “webbrowser-app” package in Ubuntu: New Bug description: By design request, all apps, click or not, should ship their own icon as PNG instead of using icons from the theme. Please download the respective icon from http://bazaar.launchpad.net /~ubuntu-art-pkg/ubuntu-themes/trunk/files/head:/suru-icons/apps/256/ and include in your packages. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-ux/+bug/1365408/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366815] [NEW] failed to install both clang-3.4 and clang-3.5
Public bug reported: Following debian packages it should be now possible to install both clang-3.4 and clang-3.5. Trying to do the same on ubuntu utopic fails (sorry for the report in french) whereas it works smoothly on Debian : Sélection du paquet clang-3.5 précédemment désélectionné. dpkg: concernant clang-3.5_3.5~+rc3-1ubuntu1_amd64.deb contenant clang-3.5 : clang-3.5 casse (« breaks ») clang-3.4 ( 1:3.4.2-7~exp1) « clang-3.4 » (version « 1:3.4.2-3ubuntu2 ») est présent ainsi que « installé ». dpkg: error processing archive clang-3.5_3.5~+rc3-1ubuntu1_amd64.deb (--install): l'installation de clang-3.5 casserait clang-3.4 et la déconfiguration n'est pas autorisée (--auto-deconfigure pourrait aider) Sélection du paquet clang-3.5-doc précédemment désélectionné. (Lecture de la base de données... 966395 fichiers et répertoires déjà installés.) Préparation du décompactage de clang-3.5-doc_3.5~+rc3-1ubuntu1_all.deb ... Sélection du paquet clang-3.5-examples précédemment désélectionné. Préparation du décompactage de clang-3.5-examples_3.5~+rc3-1ubuntu1_amd64.deb ... Sélection du paquet libclang-3.5-dev précédemment désélectionné. Préparation du décompactage de libclang-3.5-dev_3.5~+rc3-1ubuntu1_amd64.deb ... Sélection du paquet python-clang-3.5 précédemment désélectionné. dpkg: concernant python-clang-3.5_3.5~+rc3-1ubuntu1_amd64.deb contenant python-clang-3.5 : python-clang-3.5 casse (« breaks ») python-clang-3.4 « python-clang-3.4 » (version « 1:3.4.2-3ubuntu2 ») est présent ainsi que « installé ». The trouble in Ubuntu is, I think, linked with the following lines in the debian/control file: Package: clang-3.5 Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, ${dep:devlibs}, libclang-common-3.5-dev (= ${binary:Version}), libclang1-3.5 (= ${binary:Version}), libc6-dev Provides: c-compiler, objc-compiler, c++-compiler Recommends: llvm-3.5-dev, python Suggests: gnustep, gnustep-devel, clang-3.5-doc Replaces: clang-3.1, clang-3.2, clang-3.3, clang ( 1:3.5), clang-3.4 ( 1:3.4.2-7~exp1), clang-3.5 ( 1:3.5~+rc1-3~exp1), compiler-rt Breaks: clang-3.1, clang-3.2, clang-3.3, clang-3.4 ( 1:3.4.2-7~exp1), clang-3.5 ( 1:3.5~+rc1-3~exp1), compiler-rt Description: C, C++ and Objective-C compiler (LLVM based) The version number for clang-3.4 is wrong in Ubuntu. There is no 3.4.2-7~, there is only a 3.4.2-3~ Changing this would enable to install both version of clang Best C ** Affects: llvm-toolchain-3.4 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to llvm-toolchain-3.4 in Ubuntu. https://bugs.launchpad.net/bugs/1366815 Title: failed to install both clang-3.4 and clang-3.5 Status in “llvm-toolchain-3.4” package in Ubuntu: New Bug description: Following debian packages it should be now possible to install both clang-3.4 and clang-3.5. Trying to do the same on ubuntu utopic fails (sorry for the report in french) whereas it works smoothly on Debian : Sélection du paquet clang-3.5 précédemment désélectionné. dpkg: concernant clang-3.5_3.5~+rc3-1ubuntu1_amd64.deb contenant clang-3.5 : clang-3.5 casse (« breaks ») clang-3.4 ( 1:3.4.2-7~exp1) « clang-3.4 » (version « 1:3.4.2-3ubuntu2 ») est présent ainsi que « installé ». dpkg: error processing archive clang-3.5_3.5~+rc3-1ubuntu1_amd64.deb (--install): l'installation de clang-3.5 casserait clang-3.4 et la déconfiguration n'est pas autorisée (--auto-deconfigure pourrait aider) Sélection du paquet clang-3.5-doc précédemment désélectionné. (Lecture de la base de données... 966395 fichiers et répertoires déjà installés.) Préparation du décompactage de clang-3.5-doc_3.5~+rc3-1ubuntu1_all.deb ... Sélection du paquet clang-3.5-examples précédemment désélectionné. Préparation du décompactage de clang-3.5-examples_3.5~+rc3-1ubuntu1_amd64.deb ... Sélection du paquet libclang-3.5-dev précédemment désélectionné. Préparation du décompactage de libclang-3.5-dev_3.5~+rc3-1ubuntu1_amd64.deb ... Sélection du paquet python-clang-3.5 précédemment désélectionné. dpkg: concernant python-clang-3.5_3.5~+rc3-1ubuntu1_amd64.deb contenant python-clang-3.5 : python-clang-3.5 casse (« breaks ») python-clang-3.4 « python-clang-3.4 » (version « 1:3.4.2-3ubuntu2 ») est présent ainsi que « installé ». The trouble in Ubuntu is, I think, linked with the following lines in the debian/control file: Package: clang-3.5 Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, ${dep:devlibs}, libclang-common-3.5-dev (= ${binary:Version}), libclang1-3.5 (= ${binary:Version}), libc6-dev Provides: c-compiler, objc-compiler, c++-compiler Recommends: llvm-3.5-dev, python Suggests: gnustep, gnustep-devel, clang-3.5-doc Replaces: clang-3.1, clang-3.2, clang-3.3, clang ( 1:3.5), clang-3.4 ( 1:3.4.2-7~exp1), clang-3.5 ( 1:3.5~+rc1-3~exp1),
[Touch-packages] [Bug 1365664] Re: gdb source test suites are failing in Ubuntu14.10
Anton Blanchard wrote: I wonder if the gdb complaint about the kernel VDSO is causing the test to fail. The warning is almost certainly a result of this kernel patch: powerpc: Use unstripped VDSO image for more accurate profiling data Whether or not this complaint is causing that test to fail, it should be fixed. Using an unstripped VDSO image is certainly better than a stripped one, also for debugging purposes. However, it needs to be correct (and complete) -- maybe the VDSO is indeed truncated? Including full debug data, the VDSO may be longer than a page, does the kernel actually map all of it to user space? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gdb in Ubuntu. https://bugs.launchpad.net/bugs/1365664 Title: gdb source test suites are failing in Ubuntu14.10 Status in “gdb” package in Ubuntu: Confirmed Bug description: ---Problem Description--- gdb source test suites are failing in Ubuntu14.10 Machine Type = P8 ---Steps to Reproduce--- Install a P8 system with Power KVM and then install Ubuntu 14.10 guest. Then try to build and execute the gdb source test suites as below. root@ubuntu:~# apt-get source gdb root@ubuntu:~# cd gdb-7.8/ root@ubuntu:~/gdb-7.8# dpkg-buildpackage -b 21 | tee gdblog === gdb Summary === # of expected passes25009 # of unexpected failures287 # of unexpected successes 2 # of expected failures 66 # of unknown successes 1 # of known failures 59 # of unresolved testcases 3 # of untested testcases 19 # of unsupported tests 100 ---uname output--- Linux ubuntu 3.16.0-11-generic #16-Ubuntu SMP Mon Aug 25 20:02:00 UTC 2014 ppc64le ppc64le ppc64le GNU/Linux I've retested gdb from Ubuntu 14.04 (gdb-7.7-0ubuntu3.1) in the Ubuntu 14.10 VM provided by Pavaman and the number of failures curiously increased to 250 (in comparison to less than 140 on 14.04), which leads me to believe that there is something in the environment of Ubuntu 14.10 compromising gdb functionality in several testcases. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdb/+bug/1365664/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1295623] Re: Sometimes input breaks and only edges are responsive
would be good to get the fix landed in rtm today or tomorrow so we can use a promoted image to hand to customer QA team this week.. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1295623 Title: Sometimes input breaks and only edges are responsive Status in The Unity 8 shell: In Progress Status in “unity8” package in Ubuntu: In Progress Bug description: I had the music app (paused) open over night on my mako, waking up the device I found the application page showing me the one open app. The shell page itself is completely unresponsive, all side edge swipes seem to work fine though. I can switch to the music app when swiping from the right, bring up the launcher from the left and use the indicators from the top. When I am in the music app I can bring up the HUD from the bottom (trying to close the app, since the closing via the unresponsive shell does not work) but the HUD is completely unresponsive. Trying to close the HUD again via swiping down I see the indicators expand behind it and I am able to get input into the expanded indicators behind the HUD, but not the HUD itself. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity8 7.84+14.04.20140319.1-0ubuntu1 Uname: Linux 3.4.0-5-mako armv7l ApportVersion: 2.13.3-0ubuntu1 Architecture: armhf Date: Fri Mar 21 11:57:53 2014 InstallationDate: Installed on 2014-03-20 (1 days ago) InstallationMedia: Ubuntu Trusty Tahr (development branch) - armhf (20140320) ProcEnviron: TERM=linux PATH=(custom, no user) SourcePackage: unity8 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/unity8/+bug/1295623/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1303516] Re: ubiquity crashed with SIGSEGV in _int_malloc()
Verified that ubiquity does not crash with libharfbuzz0b 0.9.27-1ubuntu1 from trusty-proposed. ** Tags removed: verification-needed ** Tags added: verification-done ** Bug watch added: freedesktop.org Bugzilla #75076 https://bugs.freedesktop.org/show_bug.cgi?id=75076 ** Changed in: harfbuzz Importance: Undecided = Unknown ** Changed in: harfbuzz Status: New = Unknown ** Changed in: harfbuzz Remote watch: None = freedesktop.org Bugzilla #75076 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to harfbuzz in Ubuntu. https://bugs.launchpad.net/bugs/1303516 Title: ubiquity crashed with SIGSEGV in _int_malloc() Status in HarfBuzz: Unknown Status in “graphite2” package in Ubuntu: Invalid Status in “harfbuzz” package in Ubuntu: Fix Released Status in “graphite2” source package in Trusty: Invalid Status in “harfbuzz” source package in Trusty: Fix Committed Bug description: [ Description ] Memory corruption when rendering Myanmar text leeds to a crash [ Test case ] IMPORTANT NOTE: below will modify currently running locale/keyboard be prepared to restore it, e.g. by enabling keyboard indicator to change keyboard back to normal. 1. Install ubiquity on a desktop or boot from an ISO $ sudo apt-get install ubiquity-frontend-gtk 2. If you run on a desktop start ubiquity with: $ ubiquity --greeter 3. Scroll to the bottom of the language list, click on 5th or 4th from the bottom ACTUAL RESULT python3 segmentation fault: *** Error in `/usr/bin/python3': malloc(): memory corruption: 0x03b33d80 *** Segmentation fault (core dumped) EXPECTED RESULT No crash [ QA ] Check that the test case doesn't crash after applying the SRU [ Original Report ] I was testing a daily imagine of Ubuntu Gnome 14.04 (Live Image test), and was just checking out the languages on the initial boot up. When i was trying to click on the 4th language from the bottom ubiquitity crashed to give me this error. ProblemType: Crash DistroRelease: Ubuntu 14.04 Package: ubiquity 2.17.10 ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8 Uname: Linux 3.13.0-23-generic x86_64 ApportVersion: 2.14.1-0ubuntu1 Architecture: amd64 CasperVersion: 1.339 Date: Mon Apr 7 00:06:38 2014 ExecutablePath: /usr/lib/ubiquity/bin/ubiquity InstallCmdLine: file=/cdrom/preseed/ubuntu-gnome.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity InterpreterPath: /usr/bin/python3.4 LiveMediaBuild: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Daily amd64 (20140406) ProcCmdline: /usr/bin/python3 /usr/lib/ubiquity/bin/ubiquity --greeter --only ProcEnviron: TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SegvAnalysis: Segfault happened at: 0x7f3d8a71dd71 _int_malloc+689: mov %r14,0x10(%r9) PC (0x7f3d8a71dd71) ok source %r14 ok destination 0x10(%r9) (0x18001210) not located in a known VMA region (needed writable region)! SegvReason: writing unknown VMA Signal: 11 SourcePackage: ubiquity StacktraceTop: _int_malloc (av=0x7f3d8aa5c760 main_arena, bytes=1824) at malloc.c:3489 __GI___libc_malloc (bytes=1824) at malloc.c:2891 ?? () from /usr/lib/x86_64-linux-gnu/libgraphite2.so.3 gr_make_font_with_ops () from /usr/lib/x86_64-linux-gnu/libgraphite2.so.3 gr_make_font_with_advance_fn () from /usr/lib/x86_64-linux-gnu/libgraphite2.so.3 Title: ubiquity crashed with SIGSEGV in _int_malloc() UpgradeStatus: No upgrade log present (probably fresh install) UpstartUbiquity: debconf: DbDriver templatedb: /var/cache/debconf/templates.dat is locked by another process: Resource temporarily unavailable UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/harfbuzz/+bug/1303516/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1358968] Re: gallery_app.tests.test_photo_viewer.TestPhotoViewer.test_share_button is failing since image #175
** Changed in: gallery-app Status: In Progress = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gallery-app in Ubuntu. https://bugs.launchpad.net/bugs/1358968 Title: gallery_app.tests.test_photo_viewer.TestPhotoViewer.test_share_button is failing since image #175 Status in Gallery App: Fix Released Status in “gallery-app” package in Ubuntu: Fix Released Bug description: This test has been unstable for a long time, but it has failed on every single execution since image #175. Latest result: http://ci.ubuntu.com/smokeng/utopic/touch/mako/200:20140819.2:20140811.1/9800/gallery_app/1556521/ test-log: {{{ 21:11:33.930 WARNING testcase:115 - No tracing available - install the python-autopilot-trace package! 21:11:33.938 WARNING testcase:162 - Process manager backend unavailable, application snapshot support disabled. 21:11:33.975 DEBUG __init__:217 - Launching gallery-app via click package. 21:11:33.976 INFO _launcher:280 - Attempting to launch click application '(default)' from click package 'com.ubuntu.gallery' and URIs '' 21:11:34.748 INFO _launcher:120 - Attempting to launch application 'com.ubuntu.gallery_gallery_2.9.1.1043' with URIs '' via upstart-app-launch 21:11:43.100 INFO logging:45 - MainScreen: Open a tab. Arguments ('eventsTab',). Keyword arguments: {}. 21:11:43.148 DEBUG dbus:353 - Selecting objects of type Tab with attributes: {} 21:11:43.280 INFO logging:45 - MainScreen: Open a tab. Arguments (1,). Keyword arguments: {}. 21:11:43.369 DEBUG dbus:353 - Selecting objects of type Tab with attributes: {} 21:11:43.450 DEBUG dbus:353 - Selecting objects of type Tab with attributes: {} 21:11:43.646 DEBUG dbus:353 - Selecting objects of type QQuickItem with attributes: {'objectName': 'eventPhoto'} 21:11:43.925 INFO logging:45 - MainScreen: Close the toolbar if it's opened. Arguments (). Keyword arguments: {}. 21:11:43.971 INFO logging:45 - Toolbar: Close the toolbar if it's opened. Arguments (). Keyword arguments: {}. 21:11:44.100 DEBUG _uinput:541 - Dragging from 384,1136 to 384,1279 21:11:46.305 DEBUG dbus:353 - Selecting objects of type QQuickItem with attributes: {'objectName': 'eventPhoto'} 21:11:46.390 DEBUG dbus:353 - Selecting objects of type QQuickImage with attributes: {} 21:11:46.543 DEBUG dbus:353 - Selecting objects of type QQuickImage with attributes: {} 21:11:46.680 DEBUG _common:45 - Moving to object's globalRect coordinates. 21:11:46.681 DEBUG _uinput:470 - Tapping at: 164,528 21:11:51.417 INFO logging:45 - MainScreen: Open the toolbar if it's not already opened. Arguments (). Keyword arguments: {}. 21:11:51.474 INFO logging:45 - Toolbar: Open the toolbar if it's not already opened. Arguments (). Keyword arguments: {}. 21:11:52.617 INFO logging:45 - MainScreen: Open the toolbar if it's not already opened. Arguments (). Keyword arguments: {}. 21:11:52.673 INFO logging:45 - Toolbar: Open the toolbar if it's not already opened. Arguments (). Keyword arguments: {}. 21:11:52.838 DEBUG _common:45 - Moving to object's globalRect coordinates. 21:11:52.839 INFO logging:45 - Toolbar: Open the toolbar if it's not already opened. Arguments (). Keyword arguments: {}. 21:11:52.910 DEBUG _common:45 - Moving to object's globalRect coordinates. 21:11:52.910 DEBUG _uinput:470 - Tapping at: 687,1208 21:12:13.381 DEBUG runtest:172 - Deleting /home/phablet/Pictures 21:12:14.247 DEBUG runtest:172 - Restoring backed up pics to /home/phablet/Pictures }}} Traceback (most recent call last): File /home/phablet/autopilot/gallery_app/tests/test_photo_viewer.py, line 119, in test_share_button share_picker = self.photo_viewer.get_share_peer_picker() File /home/phablet/autopilot/gallery_app/emulators/photo_viewer.py, line 40, in get_share_peer_picker objectName=sharePicker) File /usr/lib/python3/dist-packages/autopilot/introspection/dbus.py, line 296, in wait_select_single return self.select_single(type_name, **kwargs) File /usr/lib/python3/dist-packages/autopilot/introspection/dbus.py, line 245, in select_single raise StateNotFoundError(type_name_str, **kwargs) autopilot.exceptions.StateNotFoundError: Object not found with name 'ContentPeerPicker' and properties {'objectName': 'sharePicker'}. Tips on minimizing the occurrence of this failureare available here: http://developer.ubuntu.com/api/devel/ubuntu-14.10/python/autopilot/faq/troubleshooting.html To manage notifications about this bug go to: https://bugs.launchpad.net/gallery-app/+bug/1358968/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1267260] Re: Facebook icon missing when sharing an image
** Changed in: gallery-app Status: In Progress = Invalid ** Changed in: gallery-app (Ubuntu) Status: In Progress = Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gallery-app in Ubuntu. https://bugs.launchpad.net/bugs/1267260 Title: Facebook icon missing when sharing an image Status in Gallery App: Invalid Status in “gallery-app” package in Ubuntu: Invalid Bug description: When sharing an image, my Facebook account information is shown at the top of the screen, next to an empty UbuntuShape that I assume is supposed to contain the Facebook icon. To manage notifications about this bug go to: https://bugs.launchpad.net/gallery-app/+bug/1267260/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1364009] Re: [Spread] A continuously growing number of dead applications in the spread use more and more memory
** No longer affects: unity8 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1364009 Title: [Spread] A continuously growing number of dead applications in the spread use more and more memory Status in Ubuntu UX bugs: Triaged Status in “unity8” package in Ubuntu: New Bug description: What should we do when there's a large number of dead applications (automatically killed due to out-of-memory situations) in the spread? Option 1 - Keep them all in the spread We must them unload those app screenshots (move them to disk) to save memory. If the user has a lot of dead apps in the spread, even though the apps themselves are not taking up memory space anymore, their respective screenshots in the spread still do. So oldest of those dead apps that are not being displayed on the spread should have their screenshot images unloaded and saved to disk. If the user then scrolls the spread making them visible again they should be loaded back from disk. There's the risk that if the user is flicking too fast down to the oldest apps, he might see screenshots popping in as they're reloaded from disk. Option 2 - Automatically remove the oldest dead ones Simpler to implement and there's no risk of running into the texture pop in situation described above. It also save the user the burden of manually removing apps he doesn't care anymore and probably forgot about long ago. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-ux/+bug/1364009/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366825] [NEW] camera_app.tests.test_zoom.TestCameraZoom.test_slider_zoom_in fails due to zoom slider not being visible
Public bug reported: the method activate_zoom() fails to invoke zoom slider with a 10pixel pinch. solution: increase the initial pinch to 15pixels. http://ci.ubuntu.com/smokeng/utopic/touch/mako/222:20140904.1:20140903.1/10220/camera_app/1631398/ ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: camera-app (not installed) Uname: Linux 3.4.0-5-mako armv7l ApportVersion: 2.14.7-0ubuntu2 Architecture: armhf Date: Mon Sep 8 19:04:52 2014 InstallationDate: Installed on 2014-09-08 (0 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20140908-020205) SourcePackage: camera-app UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: camera-app (Ubuntu) Importance: Low Status: New ** Tags: apport-bug armhf utopic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1366825 Title: camera_app.tests.test_zoom.TestCameraZoom.test_slider_zoom_in fails due to zoom slider not being visible Status in “camera-app” package in Ubuntu: New Bug description: the method activate_zoom() fails to invoke zoom slider with a 10pixel pinch. solution: increase the initial pinch to 15pixels. http://ci.ubuntu.com/smokeng/utopic/touch/mako/222:20140904.1:20140903.1/10220/camera_app/1631398/ ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: camera-app (not installed) Uname: Linux 3.4.0-5-mako armv7l ApportVersion: 2.14.7-0ubuntu2 Architecture: armhf Date: Mon Sep 8 19:04:52 2014 InstallationDate: Installed on 2014-09-08 (0 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20140908-020205) SourcePackage: camera-app UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/camera-app/+bug/1366825/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1349387] Re: server settings are inaccessible
This bug was fixed in the package cups - 1.7.2-0ubuntu1.2 --- cups (1.7.2-0ubuntu1.2) trusty-security; urgency=medium * SECURITY UPDATE: privilege escalation via symlinks and world-readable permissions - debian/patches/CVE-2014-50xx.patch: add some more symlink and permission checks to scheduler/client.c. - CVE-2014-5029 - CVE-2014-5030 - CVE-2014-5031 * debian/patches/cups-restore-access-to-logfiles.patch: fix regressions caused by recent security updates by allowing access to cupsd.conf and the log files. (LP: #1349387) -- Marc Deslauriers marc.deslauri...@ubuntu.com Fri, 05 Sep 2014 15:04:59 -0400 ** Changed in: cups (Ubuntu Trusty) Status: Confirmed = Fix Released ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2014-5030 ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2014-5031 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1349387 Title: server settings are inaccessible Status in “cups” package in Ubuntu: Fix Released Status in “cups” source package in Lucid: Fix Released Status in “cups” source package in Precise: Fix Released Status in “cups” source package in Trusty: Fix Released Status in “cups” source package in Utopic: Fix Released Bug description: When trying to access server settings via gnome gui in trusty I get a cups server error: There was an HTTP error: Not found. Adding/removing printers with the gui works fine. The server settings are accessible via a web browser and the web interface. system-config-printer --debug (when calling the settings menu entry): Connected as user kiran Authentication pass: 1 Authentication: password callback set PolicyKit call to FileGet did not work: dbus.String(u'Not Found') Authentication pass: 2 Forbidden: False Authentication: Try as root Connected as user root Authentication pass: 3 Forbidden: False Authentication: giving up cups access.log: localhost - - [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 401 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - - [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 401 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - cups error.log: D [28/Jul/2014:13:41:22 +0200] [Client 15] Accepted from localhost (Domain) D [28/Jul/2014:13:41:22 +0200] [Client 15] Waiting for request. D [28/Jul/2014:13:41:22 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:22 +0200] [Client 16] Accepted from localhost (Domain) D [28/Jul/2014:13:41:22 +0200] [Client 16] Waiting for request. D [28/Jul/2014:13:41:22 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] GET /admin/conf/cupsd.conf HTTP/1.1 D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Active clients, busy=Not busy D [28/Jul/2014:13:41:23 +0200] [Client 16] No authentication data provided. D [28/Jul/2014:13:41:23 +0200] cupsdIsAuthorized: username= D [28/Jul/2014:13:41:23 +0200] [Client 16] WWW-Authenticate: Basic realm=CUPS, trc=y D [28/Jul/2014:13:41:23 +0200] [Client 16] Closing connection. D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Not busy, busy=Active clients D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] Accepted from localhost (Domain) D [28/Jul/2014:13:41:23 +0200] [Client 16] Waiting for request. D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] HTTP_STATE_WAITING Closing on EOF D [28/Jul/2014:13:41:23 +0200] [Client 16] Closing connection. D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Not busy, busy=Not busy D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] Accepted from localhost (Domain) D [28/Jul/2014:13:41:23 +0200] [Client 16] Waiting for request. D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] HTTP_STATE_WAITING Closing on EOF D [28/Jul/2014:13:41:23 +0200] [Client 16] Closing connection. D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Not busy, busy=Not busy D [28/Jul/2014:13:41:23 +0200] cupsd is not idle
[Touch-packages] [Bug 1357782] Re: udev(7) is wrong
This bug was fixed in the package systemd - 208-8ubuntu2 --- systemd (208-8ubuntu2) utopic; urgency=medium [ Ben Howard ] * 75-persistent-net-generator.rules: Fix matches of HyperV. (LP: #1361272) [ Martin Pitt ] * Add new autopkgtest boot_and_services which reboots the testbed with systemd as init and verifies that the most critical services like lightdm, D-BUS, NetworkManager, and cron work. (To be extended in the future) * Fix udev path in udev(7). (LP: #1357782) * path_id: suppress ID_PATH for devices with an unknown parent device type. (LP: #1321816) * udev-builtin-keyboard: Allow numeric key codes. (LP: #1247584) -- Martin Pitt martin.p...@ubuntu.com Mon, 08 Sep 2014 14:44:35 +0200 ** Changed in: systemd (Ubuntu) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1357782 Title: udev(7) is wrong Status in “systemd” package in Ubuntu: Fix Released Bug description: udev(7) is wrong: It says, that system rules are in /usr/lib/udev/rules.d but obviously there are no udev rules! Should be corrected to /lib/udev/rules.d . To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1357782/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366825] Re: camera_app.tests.test_zoom.TestCameraZoom.test_slider_zoom_in fails due to zoom slider not being visible
** Branch linked: lp:~canonical-platform-qa/camera- app/lp1366825_fix_zoom -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1366825 Title: camera_app.tests.test_zoom.TestCameraZoom.test_slider_zoom_in fails due to zoom slider not being visible Status in “camera-app” package in Ubuntu: New Bug description: the method activate_zoom() fails to invoke zoom slider with a 10pixel pinch. solution: increase the initial pinch to 15pixels. http://ci.ubuntu.com/smokeng/utopic/touch/mako/222:20140904.1:20140903.1/10220/camera_app/1631398/ ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: camera-app (not installed) Uname: Linux 3.4.0-5-mako armv7l ApportVersion: 2.14.7-0ubuntu2 Architecture: armhf Date: Mon Sep 8 19:04:52 2014 InstallationDate: Installed on 2014-09-08 (0 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20140908-020205) SourcePackage: camera-app UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/camera-app/+bug/1366825/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1361272] Re: error in udev rules for hyperv net rules
This bug was fixed in the package systemd - 208-8ubuntu2 --- systemd (208-8ubuntu2) utopic; urgency=medium [ Ben Howard ] * 75-persistent-net-generator.rules: Fix matches of HyperV. (LP: #1361272) [ Martin Pitt ] * Add new autopkgtest boot_and_services which reboots the testbed with systemd as init and verifies that the most critical services like lightdm, D-BUS, NetworkManager, and cron work. (To be extended in the future) * Fix udev path in udev(7). (LP: #1357782) * path_id: suppress ID_PATH for devices with an unknown parent device type. (LP: #1321816) * udev-builtin-keyboard: Allow numeric key codes. (LP: #1247584) -- Martin Pitt martin.p...@ubuntu.com Mon, 08 Sep 2014 14:44:35 +0200 ** Changed in: systemd (Ubuntu Utopic) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1361272 Title: error in udev rules for hyperv net rules Status in “systemd” package in Ubuntu: Fix Released Status in “udev” package in Ubuntu: Invalid Status in “udev” source package in Precise: Fix Committed Status in “systemd” source package in Trusty: Fix Committed Status in “systemd” source package in Utopic: Fix Released Bug description: There is an error in the syntax where the MAC address does not match if the alpha characters are upper case rather than all lower case. For example, these rules are not matched properly: ENV{MATCHADDR}==00:0c:29:*|00:50:56:*|00:05:69:*|00:1C:14:* - should be 00:1c:14:* ENV{MATCHADDR}==00:12:5A:* - should be 00:12:5a:* ENV{MATCHADDR}==00:17:FA:* - should be 00:17:fa:* ENV{MATCHADDR}==00:50:F2:* - should be 00:50:f2:* ENV{MATCHADDR}==Dc:B4:c4:* - should be dc:b4:c4:* To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1361272/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1273629] Re: HSP fails on Ubuntu Touch [Bluetooth headset does not work]
I think we can mark this as Fix Released by now; fixes for this have been landed in ubuntu-touch and ubuntu-rtm images for a while and we've tested it, it does appear to work properly. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1273629 Title: HSP fails on Ubuntu Touch [Bluetooth headset does not work] Status in “bluez” package in Ubuntu: Fix Committed Bug description: When on Ubuntu Touch, HSP consistently fails to route any audio to the paired audio device. bluez-test-device create BT address bluez-test-audio connect BT address The above should create and pair a detected (in discoverable mode) bluetooth device, by default setting it up for HSP. The following excerpt from syslog on my mako shows the issue, with a bluetooth headset device failing to bring up HSP -- pulseaudio can acquire the first transport, but never release it: Jan 28 09:47:41 ubuntu-phablet bluetoothd[4621]: plugins/hciops.c:start_inquiry() hci0 length 8 Jan 28 09:47:41 ubuntu-phablet bluetoothd[4621]: Discovery session 0x41f77f98 with :1.132 activated Jan 28 09:47:41 ubuntu-phablet bluetoothd[4621]: src/adapter.c:session_ref() 0x41f77f98: ref=1 Jan 28 09:47:41 ubuntu-phablet bluetoothd[4621]: plugins/hciops.c:set_state() hci0: new state 1 Jan 28 09:47:49 ubuntu-phablet bluetoothd[4621]: src/adapter.c:session_remove() Discovery session 0x41f77f98 with :1.132 deactivated Jan 28 09:47:49 ubuntu-phablet bluetoothd[4621]: src/adapter.c:session_remove() Stopping discovery Jan 28 09:47:49 ubuntu-phablet bluetoothd[4621]: plugins/hciops.c:hciops_stop_discovery() index 0 Jan 28 09:47:49 ubuntu-phablet bluetoothd[4621]: plugins/hciops.c:hciops_stop_inquiry() hci0 Jan 28 09:47:49 ubuntu-phablet bluetoothd[4621]: plugins/hciops.c:set_state() hci0: new state 0 Jan 28 09:47:54 ubuntu-phablet bluetoothd[4621]: src/adapter.c:create_device() 00:1A:7D:54:32:8D Jan 28 09:47:54 ubuntu-phablet bluetoothd[4621]: src/adapter.c:adapter_create_device() 00:1A:7D:54:32:8D Jan 28 09:47:54 ubuntu-phablet bluetoothd[4621]: src/device.c:device_create() Creating device /org/bluez/4621/hci0/dev_00_1A_7D_54_32_8D Jan 28 09:47:54 ubuntu-phablet bluetoothd[4621]: src/device.c:btd_device_ref() 0x41f936e8: ref=1 Jan 28 09:47:54 ubuntu-phablet bluetoothd[4621]: src/device.c:device_set_temporary() temporary 1 Jan 28 09:47:54 ubuntu-phablet bluetoothd[4621]: src/device.c:btd_device_ref() 0x41f936e8: ref=2 Jan 28 09:47:54 ubuntu-phablet kernel: [ 3389.758613] l2cap_sock_connect: failed -115 Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: plugins/hciops.c:conn_complete() status 0x00 Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: src/adapter.c:adapter_get_device() 00:1A:7D:54:32:8D Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: plugins/hciops.c:remote_version_information() hci0 status 0 Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: plugins/hciops.c:remote_features_information() hci0 status 0 Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: plugins/hciops.c:remote_name_information() hci0 status 0 Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: src/device.c:device_probe_drivers() Probing drivers for 00:1A:7D:54:32:8D Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: serial/manager.c:serial_probe() path /org/bluez/4621/hci0/dev_00_1A_7D_54_32_8D: 1108--1000-8000-00805f9b34fb Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: serial/port.c:create_serial_device() Registered interface org.bluez.Serial on path /org/bluez/4621/hci0/dev_00_1A_7D_54_32_8D Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: serial/manager.c:serial_probe() path /org/bluez/4621/hci0/dev_00_1A_7D_54_32_8D: 111e--1000-8000-00805f9b34fb Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: input/manager.c:headset_probe() path /org/bluez/4621/hci0/dev_00_1A_7D_54_32_8D Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: src/device.c:btd_device_ref() 0x41f936e8: ref=3 Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: input/device.c:input_device_new() Registered interface org.bluez.Input on path /org/bluez/4621/hci0/dev_00_1A_7D_54_32_8D Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: src/adapter.c:adapter_get_device() 00:1A:7D:54:32:8D Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: src/device.c:btd_device_ref() 0x41f936e8: ref=4 Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: audio/device.c:audio_device_register() Registered interface org.bluez.Audio on path /org/bluez/4621/hci0/dev_00_1A_7D_54_32_8D Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: audio/manager.c:handle_uuid() Found Headset record Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]: audio/headset.c:headset_init() Registered interface org.bluez.Headset on path /org/bluez/4621/hci0/dev_00_1A_7D_54_32_8D Jan 28 09:47:55 ubuntu-phablet bluetoothd[4621]:
[Touch-packages] [Bug 1321816] Re: [udev] /dev/disk/by-path link for scsi disks always has host 0, causing conflicts
This bug was fixed in the package systemd - 208-8ubuntu2 --- systemd (208-8ubuntu2) utopic; urgency=medium [ Ben Howard ] * 75-persistent-net-generator.rules: Fix matches of HyperV. (LP: #1361272) [ Martin Pitt ] * Add new autopkgtest boot_and_services which reboots the testbed with systemd as init and verifies that the most critical services like lightdm, D-BUS, NetworkManager, and cron work. (To be extended in the future) * Fix udev path in udev(7). (LP: #1357782) * path_id: suppress ID_PATH for devices with an unknown parent device type. (LP: #1321816) * udev-builtin-keyboard: Allow numeric key codes. (LP: #1247584) -- Martin Pitt martin.p...@ubuntu.com Mon, 08 Sep 2014 14:44:35 +0200 ** Changed in: systemd (Ubuntu) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1321816 Title: [udev] /dev/disk/by-path link for scsi disks always has host 0, causing conflicts Status in “systemd” package in Ubuntu: Fix Released Bug description: The /dev/disk/by-path links to scsi disks are supposed to be of the form scsi-$host:$bus:$device$lun. The host portion is always zero, leading to duplicates from different hosts. It appears these numbers are pulled from ID_PATH, and I can't figure out where this variable comes from. I noticed this while playing around with the lio fake scsi target adapter. Here is the full udev info on a disk created on such an adapter. As you can see, it has been assigned scsi host id 13, so that is what it should be using for the $host digit, rather than zero. P: /devices/tcm_loop_0/tcm_loop_adapter_5/host13/target13:0:1/13:0:1:0/block/sdg N: sdg S: disk/by-path/scsi-0:0:1:0 E: DEVLINKS=/dev/disk/by-path/scsi-0:0:1:0 E: DEVNAME=/dev/sdg E: DEVPATH=/devices/tcm_loop_0/tcm_loop_adapter_5/host13/target13:0:1/13:0:1:0/block/sdg E: DEVTYPE=disk E: ID_BUS=scsi E: ID_MODEL=FILEIO E: ID_MODEL_ENC=FILEIO\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20 E: ID_PART_TABLE_TYPE=dos E: ID_PATH=scsi-0:0:1:0 E: ID_PATH_TAG=scsi-0_0_1_0 E: ID_REVISION=4.0 E: ID_SCSI=1 E: ID_TYPE=disk E: ID_VENDOR=LIO-ORG E: ID_VENDOR_ENC=LIO-ORG\x20 E: MAJOR=8 E: MINOR=96 E: SUBSYSTEM=block E: USEC_INITIALIZED=400656927711 E: nomdmonddf=1 E: nomdmonisw=1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1321816/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1354564] Re: Keyboard no longer works in Unity8 desktop session
potentially the same as https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1322116 ** No longer affects: maliit-framework (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1354564 Title: Keyboard no longer works in Unity8 desktop session Status in Mir: New Status in “mir” package in Ubuntu: Confirmed Status in “qtmir” package in Ubuntu: Confirmed Status in “unity8” package in Ubuntu: Incomplete Status in “unity8-desktop-session” package in Ubuntu: Confirmed Bug description: The keyboard no longer works in the Unity 8 desktop session. Looking at the ~/.cache/upstart/unity8.log, it looks as though the socket Unity 8 is trying to connect to does not exist. I see some of the following messages: UbuntuKeyboardInfo - socket error: QLocalSocket::connectToServer: Invalid name then the last message says: Failed to connect to /run/user/1001/ubuntu-keyboard-info after 10 failed attempts I looked in /run/user/1001 and did not see any file by that name. To manage notifications about this bug go to: https://bugs.launchpad.net/mir/+bug/1354564/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1247584] Re: [keymap] hwdb keymaps don't support numeric keycodes
This bug was fixed in the package systemd - 208-8ubuntu2 --- systemd (208-8ubuntu2) utopic; urgency=medium [ Ben Howard ] * 75-persistent-net-generator.rules: Fix matches of HyperV. (LP: #1361272) [ Martin Pitt ] * Add new autopkgtest boot_and_services which reboots the testbed with systemd as init and verifies that the most critical services like lightdm, D-BUS, NetworkManager, and cron work. (To be extended in the future) * Fix udev path in udev(7). (LP: #1357782) * path_id: suppress ID_PATH for devices with an unknown parent device type. (LP: #1321816) * udev-builtin-keyboard: Allow numeric key codes. (LP: #1247584) -- Martin Pitt martin.p...@ubuntu.com Mon, 08 Sep 2014 14:44:35 +0200 ** Changed in: systemd (Ubuntu) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1247584 Title: [keymap] hwdb keymaps don't support numeric keycodes Status in “systemd” package in Ubuntu: Fix Released Bug description: On Ubuntu 13.04 I had the middle mouse button of my Logitech T400 mapped correctly, but after upgrading to 13.10 the /lib/udev/kemap utility has disappeared and now I can no longer assign the middle button to the middle button function. This mouse has assigned by default the middle button to the left_meta keyboard key (super key). That's very annoying because I can't do middle clicking with this mouse. This mouse has two middle buttons, in the trackpad that serves as middle wheel, but the button that currently serves as middle click it's in a very uncomfortable position, and the button with the left_meta functionality is the one I'd like to use as middle button. I tried modifying the file at /lib/udev/hwdb.d/60-keyboard.hwdb with this rule: keyboard:usb:v046DpC52B* KEYBOARD_KEY_700E3=middle and also with keyboard:usb:v046DpC52B* KEYBOARD_KEY_700E3=274 evtest returns the following results and codes: BUTTON I WANT TO ASSIGN: Event: time 1383485540.705610, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e3 Event: time 1383485540.705610, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 1 Event: time 1383485540.705610, -- SYN_REPORT Event: time 1383485540.809618, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e3 Event: time 1383485540.809618, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 0 Event: time 1383485540.809618, -- SYN_REPORT THE BUTTON IN UNCOMFORTABLE POSITION Event: time 1383485765.956075, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1383485765.956075, type 1 (EV_KEY), code 274 (BTN_MIDDLE), value 1 Event: time 1383485765.956075, -- SYN_REPORT Event: time 1383485766.173978, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1383485766.173978, type 1 (EV_KEY), code 274 (BTN_MIDDLE), value 0 Event: time 1383485766.173978, -- SYN_REPORT So, I would like to assign the BTN_MIDDLE function to the 700e3 scancode, but it does not work. With the previous utility included in Ubuntu I could do this, but now with this SystemD way I can't do the assignment. I have not rebooted, but I did rebuild the hwdb database with the udevadm hwdb --update, and replugged the mouse. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: udev 204-0ubuntu19 [modified: lib/udev/hwdb.d/60-keyboard.hwdb] ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 CustomUdevRuleFiles: 60-android-devices.rules Date: Sun Nov 3 14:23:16 2013 InstallationDate: Installed on 2011-12-24 (680 days ago) InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111011) MachineType: ASUSTeK Computer Inc. N53SN MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-12-generic root=/dev/mapper/ubunturoot-raiz ro quiet splash audit=1 SourcePackage: systemd UpgradeStatus: Upgraded to saucy on 2013-10-28 (5 days ago) dmi.bios.date: 01/10/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N53SN.209 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N53SN dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN53SN.209:bd01/10/2012:svnASUSTeKComputerInc.:pnN53SN:pvr1.0:rvnASUSTeKComputerInc.:rnN53SN:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0: dmi.product.name: N53SN dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1247584/+subscriptions -- Mailing list:
[Touch-packages] [Bug 1349387] Re: server settings are inaccessible
This bug was fixed in the package cups - 1.4.3-1ubuntu1.13 --- cups (1.4.3-1ubuntu1.13) lucid-security; urgency=medium * SECURITY UPDATE: privilege escalation via symlinks and world-readable permissions - debian/patches/CVE-2014-50xx.dpatch: add some more symlink and permission checks to scheduler/client.c. - CVE-2014-5029 - CVE-2014-5030 - CVE-2014-5031 * debian/patches/cups-restore-access-to-logfiles.dpatch: fix regressions caused by recent security updates by allowing access to cupsd.conf and the log files. (LP: #1349387) -- Marc Deslauriers marc.deslauri...@ubuntu.com Fri, 05 Sep 2014 15:21:01 -0400 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1349387 Title: server settings are inaccessible Status in “cups” package in Ubuntu: Fix Released Status in “cups” source package in Lucid: Fix Released Status in “cups” source package in Precise: Fix Released Status in “cups” source package in Trusty: Fix Released Status in “cups” source package in Utopic: Fix Released Bug description: When trying to access server settings via gnome gui in trusty I get a cups server error: There was an HTTP error: Not found. Adding/removing printers with the gui works fine. The server settings are accessible via a web browser and the web interface. system-config-printer --debug (when calling the settings menu entry): Connected as user kiran Authentication pass: 1 Authentication: password callback set PolicyKit call to FileGet did not work: dbus.String(u'Not Found') Authentication pass: 2 Forbidden: False Authentication: Try as root Connected as user root Authentication pass: 3 Forbidden: False Authentication: giving up cups access.log: localhost - - [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 401 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - - [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 401 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - cups error.log: D [28/Jul/2014:13:41:22 +0200] [Client 15] Accepted from localhost (Domain) D [28/Jul/2014:13:41:22 +0200] [Client 15] Waiting for request. D [28/Jul/2014:13:41:22 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:22 +0200] [Client 16] Accepted from localhost (Domain) D [28/Jul/2014:13:41:22 +0200] [Client 16] Waiting for request. D [28/Jul/2014:13:41:22 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] GET /admin/conf/cupsd.conf HTTP/1.1 D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Active clients, busy=Not busy D [28/Jul/2014:13:41:23 +0200] [Client 16] No authentication data provided. D [28/Jul/2014:13:41:23 +0200] cupsdIsAuthorized: username= D [28/Jul/2014:13:41:23 +0200] [Client 16] WWW-Authenticate: Basic realm=CUPS, trc=y D [28/Jul/2014:13:41:23 +0200] [Client 16] Closing connection. D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Not busy, busy=Active clients D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] Accepted from localhost (Domain) D [28/Jul/2014:13:41:23 +0200] [Client 16] Waiting for request. D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] HTTP_STATE_WAITING Closing on EOF D [28/Jul/2014:13:41:23 +0200] [Client 16] Closing connection. D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Not busy, busy=Not busy D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] Accepted from localhost (Domain) D [28/Jul/2014:13:41:23 +0200] [Client 16] Waiting for request. D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] HTTP_STATE_WAITING Closing on EOF D [28/Jul/2014:13:41:23 +0200] [Client 16] Closing connection. D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Not busy, busy=Not busy D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] Accepted from localhost (Domain) D [28/Jul/2014:13:41:23 +0200] [Client 16] Waiting for request. D [28/Jul/2014:13:41:23 +0200] cupsd is not idle
[Touch-packages] [Bug 1349387] Re: server settings are inaccessible
This bug was fixed in the package cups - 1.5.3-0ubuntu8.5 --- cups (1.5.3-0ubuntu8.5) precise-security; urgency=medium * SECURITY UPDATE: privilege escalation via symlinks and world-readable permissions - debian/patches/CVE-2014-50xx.patch: add some more symlink and permission checks to scheduler/client.c. - CVE-2014-5029 - CVE-2014-5030 - CVE-2014-5031 * debian/patches/cups-restore-access-to-logfiles.patch: fix regressions caused by recent security updates by allowing access to cupsd.conf and the log files. (LP: #1349387) -- Marc Deslauriers marc.deslauri...@ubuntu.com Fri, 05 Sep 2014 15:17:47 -0400 ** Changed in: cups (Ubuntu Precise) Status: Confirmed = Fix Released ** Changed in: cups (Ubuntu Lucid) Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1349387 Title: server settings are inaccessible Status in “cups” package in Ubuntu: Fix Released Status in “cups” source package in Lucid: Fix Released Status in “cups” source package in Precise: Fix Released Status in “cups” source package in Trusty: Fix Released Status in “cups” source package in Utopic: Fix Released Bug description: When trying to access server settings via gnome gui in trusty I get a cups server error: There was an HTTP error: Not found. Adding/removing printers with the gui works fine. The server settings are accessible via a web browser and the web interface. system-config-printer --debug (when calling the settings menu entry): Connected as user kiran Authentication pass: 1 Authentication: password callback set PolicyKit call to FileGet did not work: dbus.String(u'Not Found') Authentication pass: 2 Forbidden: False Authentication: Try as root Connected as user root Authentication pass: 3 Forbidden: False Authentication: giving up cups access.log: localhost - - [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 401 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - - [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 401 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - localhost - root [28/Jul/2014:13:40:42 +0200] GET /admin/conf/cupsd.conf HTTP/1.1 404 0 - - cups error.log: D [28/Jul/2014:13:41:22 +0200] [Client 15] Accepted from localhost (Domain) D [28/Jul/2014:13:41:22 +0200] [Client 15] Waiting for request. D [28/Jul/2014:13:41:22 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:22 +0200] [Client 16] Accepted from localhost (Domain) D [28/Jul/2014:13:41:22 +0200] [Client 16] Waiting for request. D [28/Jul/2014:13:41:22 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] GET /admin/conf/cupsd.conf HTTP/1.1 D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Active clients, busy=Not busy D [28/Jul/2014:13:41:23 +0200] [Client 16] No authentication data provided. D [28/Jul/2014:13:41:23 +0200] cupsdIsAuthorized: username= D [28/Jul/2014:13:41:23 +0200] [Client 16] WWW-Authenticate: Basic realm=CUPS, trc=y D [28/Jul/2014:13:41:23 +0200] [Client 16] Closing connection. D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Not busy, busy=Active clients D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] Accepted from localhost (Domain) D [28/Jul/2014:13:41:23 +0200] [Client 16] Waiting for request. D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] HTTP_STATE_WAITING Closing on EOF D [28/Jul/2014:13:41:23 +0200] [Client 16] Closing connection. D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Not busy, busy=Not busy D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] Accepted from localhost (Domain) D [28/Jul/2014:13:41:23 +0200] [Client 16] Waiting for request. D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client 16] HTTP_STATE_WAITING Closing on EOF D [28/Jul/2014:13:41:23 +0200] [Client 16] Closing connection. D [28/Jul/2014:13:41:23 +0200] cupsdSetBusyState: newbusy=Not busy, busy=Not busy D [28/Jul/2014:13:41:23 +0200] cupsd is not idle any more, canceling shutdown. D [28/Jul/2014:13:41:23 +0200] [Client
[Touch-packages] [Bug 1364310] Re: The new album title and subtitle can not be translated
** Changed in: gallery-app (Ubuntu) Status: New = In Progress ** Changed in: gallery-app (Ubuntu) Importance: Undecided = High ** Changed in: gallery-app (Ubuntu) Assignee: (unassigned) = Ugo Riboni (uriboni) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gallery-app in Ubuntu. https://bugs.launchpad.net/bugs/1364310 Title: The new album title and subtitle can not be translated Status in Gallery App: In Progress Status in Ubuntu Translations: Triaged Status in “gallery-app” package in Ubuntu: In Progress Bug description: When creating a new album the title and subtitle are always in English. These strings should be localizable. To manage notifications about this bug go to: https://bugs.launchpad.net/gallery-app/+bug/1364310/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1364008] Re: Cannot pair with Altavoz Vivaldi Bluetooth speaker
Hmm, this didn't include the information I expected. Here's a different command to use, again with the speaker in range: hcitool inq You should get a list of all the devices in range and their class, etc.; the class information is what I need. In the meantime, I'll dig in the code and make sure all types of speakers are properly handled, but I'd like to make certain this is indeed saying it's a speaker, and not some other multimedia device. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1364008 Title: Cannot pair with Altavoz Vivaldi Bluetooth speaker Status in “bluez” package in Ubuntu: New Bug description: krillin ubuntu-rtm/14.09-proposed build 9. bluez 4.101-0ubuntu19 armhf SUMMARY: Cannot pair with Avrha Altavoz Vivaldi Bluetooth speaker: http://www.bqreaders.com/gb/accessories-aquaris.html Device is Bluetooth v2.0 +EDR [Note that the other listed Bluetooth Speaker Strauss does work] STEPS: 1) Turn on speaker so that it is in pairing mode 2) On krillin attempt to pair with the speaker EXPECTED RESULT: The pairing should be successful ACTUAL RESULT: In the list of Bluetooth devices a greyed-out speaker icon is listed with the name '...' The name is never resolved and it is not possible to start a pairing request with the device. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1364008/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366752] Re: Phone freezes for a moment when message notification appears
** Changed in: unity8 (Ubuntu) Status: New = Confirmed ** Changed in: unity8 (Ubuntu) Importance: Undecided = Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1366752 Title: Phone freezes for a moment when message notification appears Status in “unity8” package in Ubuntu: Confirmed Bug description: unity8 8.00+14.10.20140903.1~rtm-0ubuntu1 image# 29 RTM When I receive a message, my phone halts for a moment and then resumes. 1. Open messaging app. 2. send a message to your own number 3. before the message is received slowly drag from the left edge to the right What happens: when you are dragging, there is a slight halt in the UI before the OSD appears. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1366752/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1357616] Re: keyboard is not translated
** Changed in: ubuntu-keyboard (Ubuntu) Importance: Undecided = Critical ** Changed in: ubuntu-keyboard Status: In Progress = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1357616 Title: keyboard is not translated Status in Ubuntu Keyboard: Fix Released Status in Ubuntu Translations: Triaged Status in “ubuntu-keyboard” package in Ubuntu: Fix Released Bug description: This project has no pot file and is not set up for translations with launchpad. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-keyboard/+bug/1357616/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1234130] Re: Gallery app does not refresh thumbnails correctly
** Also affects: gallery-app Importance: Undecided Status: New ** Changed in: gallery-app Importance: Undecided = High ** Changed in: gallery-app Assignee: (unassigned) = Ugo Riboni (uriboni) ** Changed in: gallery-app Status: New = In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gallery-app in Ubuntu. https://bugs.launchpad.net/bugs/1234130 Title: Gallery app does not refresh thumbnails correctly Status in Gallery App: In Progress Status in QT Ubuntu Camera: New Status in “gallery-app” package in Ubuntu: In Progress Bug description: PRE-REQUISITE: Delete all images from the gallery TEST CASE: 1. Take a photo using the camera app 2. Load the gallery app and view the thumbnail of the image just taken 3. Select the thumbnail and delete it from gallery (gallery should be blank) 4. Switch back to camera app, leaving gallery running 5. Take another photo using the camera (take it of something different to the first image) 6. Switch back to the gallery app EXPECTED RESULT: The new image thumbnail should be displayed in the gallery ACTUAL RESULT: The old thumbnail image from the first image is displayed. When you press the thumbnail the new image loads. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: gallery-app 0.0.67+13.10.20130924.1-0ubuntu2 Uname: Linux 3.4.0-3-mako armv7l ApportVersion: 2.12.5-0ubuntu1 Architecture: armhf Date: Wed Oct 2 11:46:02 2013 InstallationDate: Installed on 2013-10-01 (0 days ago) InstallationMedia: Ubuntu Saucy Salamander (development branch) - armhf (20131001.3) MarkForUpload: True ProcEnviron: TERM=linux PATH=(custom, no user) SourcePackage: gallery-app UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gallery-app/+bug/1234130/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1366828] Re: tried to connect an iphone with ios7.
*** This bug is a duplicate of bug 1332899 *** https://bugs.launchpad.net/bugs/1332899 Thank you for taking the time to report this crash and helping to make this software better. This particular crash has already been reported and is a duplicate of bug #1332899, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Attachment removed: CoreDump.gz https://bugs.launchpad.net/bugs/1366828/+attachment/4198606/+files/CoreDump.gz ** Attachment removed: ProcMaps.txt https://bugs.launchpad.net/bugs/1366828/+attachment/4198608/+files/ProcMaps.txt ** Attachment removed: ProcStatus.txt https://bugs.launchpad.net/bugs/1366828/+attachment/4198609/+files/ProcStatus.txt ** This bug has been marked a duplicate of private bug 1332899 ** Information type changed from Private to Public ** Tags removed: need-i386-retrace -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to upower in Ubuntu. https://bugs.launchpad.net/bugs/1366828 Title: tried to connect an iphone with ios7. Status in “upower” package in Ubuntu: New Bug description: it just kept bringing up errors in ubuntu. the iphone only asked 1 time each time i connected to trust the computer. ProblemType: Crash DistroRelease: Ubuntu 14.10 Package: upower 0.9.23-2ubuntu2 ProcVersionSignature: Ubuntu 3.16.0-14.20-generic 3.16.2 Uname: Linux 3.16.0-14-generic i686 ApportVersion: 2.14.7-0ubuntu2 Architecture: i386 Date: Mon Sep 8 09:14:20 2014 ExecutablePath: /usr/lib/upower/upowerd InstallationDate: Installed on 2014-09-04 (4 days ago) InstallationMedia: Ubuntu MATE 14.10 Utopic Unicorn - beta1 i386 (20140828) ProcCmdline: /usr/lib/upower/upowerd ProcEnviron: SegvAnalysis: Skipped: missing required field Disassembly Signal: 11 SourcePackage: upower UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/upower/+bug/1366828/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1359404] Re: Symbol page switch back should match other platforms
** Changed in: ubuntu-keyboard (Ubuntu) Status: New = In Progress ** Changed in: ubuntu-keyboard Status: New = In Progress ** Changed in: ubuntu-keyboard (Ubuntu) Importance: Medium = High ** Changed in: ubuntu-keyboard Importance: Medium = High ** Tags added: 20014-09-14 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1359404 Title: Symbol page switch back should match other platforms Status in Ubuntu Keyboard: In Progress Status in “ubuntu-keyboard” package in Ubuntu: In Progress Bug description: Currently the automatic switch back from certain characters on the symbol page only happens with ? and !, this makes it difficult to type a sentence like: This is so awesome We should check what other platform's keyboards do and match the keys they automatically switch back on. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-keyboard/+bug/1359404/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1335007] Re: Can't use pinyin for Chinese in browser URL bar due to Qt.ImhUrlCharactersOnly
** Tags added: 20014-09-25 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1335007 Title: Can't use pinyin for Chinese in browser URL bar due to Qt.ImhUrlCharactersOnly Status in Ubuntu Keyboard: Confirmed Status in “ubuntu-keyboard” package in Ubuntu: Confirmed Bug description: With Chinese pinyin input method enabled, open the browser, tap the URL bar/ search bar, type n and i. You should see 你 as a word prediction. In fact no words show up. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-keyboard/+bug/1335007/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1337696] Re: python3-click is installing its tests in /usr/lib/python3/dist-packages/tests/
** Branch linked: lp:ubuntu/utopic-proposed/click -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to click in Ubuntu. https://bugs.launchpad.net/bugs/1337696 Title: python3-click is installing its tests in /usr/lib/python3/dist- packages/tests/ Status in “click” package in Ubuntu: In Progress Bug description: I found out because we were doing the same on one of our packages :) dpkg: error processing archive /tmp/archive/./ubuntu-experience-tests_0.1+autopilot0_all.deb (--unpack): trying to overwrite '/usr/lib/python3/dist-packages/tests/__init__.py', which is also in package python3-click 0.4.28 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/click/+bug/1337696/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1359404] Re: Symbol page switch back should match other platforms
** Tags removed: 20014-09-14 ** Tags added: touch-2014-09-11 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1359404 Title: Symbol page switch back should match other platforms Status in Ubuntu Keyboard: In Progress Status in “ubuntu-keyboard” package in Ubuntu: In Progress Bug description: Currently the automatic switch back from certain characters on the symbol page only happens with ? and !, this makes it difficult to type a sentence like: This is so awesome We should check what other platform's keyboards do and match the keys they automatically switch back on. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-keyboard/+bug/1359404/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1290847] Re: pyvenv fails due to mising ensurepip module
Why this is marked as Fix Released? This is still broken. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to python3-defaults in Ubuntu. https://bugs.launchpad.net/bugs/1290847 Title: pyvenv fails due to mising ensurepip module Status in “python3-defaults” package in Ubuntu: Fix Released Status in “python3.4” package in Ubuntu: Fix Released Status in “python3.4” package in Debian: Fix Released Bug description: Hello, I noticed the following # fails python3.4 -m venv --clear python-venv Error: Command '['.../external/python-venv/bin/python3.4', '-Im', 'ensurepip', '--upgrade', '--default-pip']' returned non-zero exit status 1 # works, but no pip python3.4 -m venv --clear --without-pip python-venv Thank you To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/python3-defaults/+bug/1290847/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp