[Touch-packages] [Bug 1473542] Re: ubuntu-server daily iso - Upon installation, /etc/network/interfaces not populated with correct network interface names, so networking fails to start
This bug was fixed in the package systemd - 222-1ubuntu3 --- systemd (222-1ubuntu3) wily; urgency=medium * debian/udev-udeb.install: Fix the FTBFS created by the previous upload. systemd (222-1ubuntu2) wily; urgency=medium * debian/udev-udeb.install: Install new bits for net.ifnames (LP: #1473542) * debian/extra/initramfs-tools/hooks/udev: Do the same for initramfs-tools. -- Adam Conrad adcon...@ubuntu.com Fri, 10 Jul 2015 16:40:19 -0600 ** Changed in: systemd (Ubuntu) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1473542 Title: ubuntu-server daily iso - Upon installation, /etc/network/interfaces not populated with correct network interface names, so networking fails to start Status in debian-installer package in Ubuntu: Fix Released Status in systemd package in Ubuntu: Fix Released Bug description: Hello. I've installed today from the Ubuntu Server Daily ISO. During the installer process, we get the system identifying network interfaces with the traditional unpredictable naming algorithms of eth##. After installation, the system uses systemd to identify network interface names, per http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/ In the Virtual Environment i'm using, on VMware Workstation x64 with two virtual NICs, I end up with ens33 and ens34 according to the installed system. However, the installer populated the /etc/network/interfaces configuration with eth0 and eth1. As a result, networking fails to start up after a reboot, and either /etc/network/interfaces needs edited to match the correct identifiers and a reboot issued, or one has to do `sudo dhclient` to update the IP address. For static addressing networks, of course, you still need to revise the interfaces file. This is a serious issue, as upon installation via the ubuntu-server ISO, networking will fail to come up, leaving users to scratch their head expecting instant access. Due to an uncertainty in the severity, I've set it to High given that last point. Please feel free to change it. Note that this is filed against both systemd and netcfg as I am not sure which one needs to be fixed. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: systemd 222-1ubuntu1 ProcVersionSignature: Ubuntu 4.0.0-4.6-generic 4.0.7 Uname: Linux 4.0.0-4-generic x86_64 ApportVersion: 2.17.3-0ubuntu4 Architecture: amd64 Date: Fri Jul 10 15:15:17 2015 InstallationDate: Installed on 2015-07-10 (0 days ago) InstallationMedia: Ubuntu-Server 15.10 Wily Werewolf - Alpha amd64 (20150709) MachineType: VMware, Inc. VMware Virtual Platform ProcEnviron: TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.0.0-4-generic root=UUID=34413d00-2883-4593-a395-7c6b16e3cc6e ro SourcePackage: systemd UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/31/2013 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/31/2013:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1473542/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1473643] [NEW] Enable switching to full desktop sites
*** This bug is a duplicate of bug 1377033 *** https://bugs.launchpad.net/bugs/1377033 Public bug reported: Hello, this is more like a feature request. I've just noticed that on desktop Ubuntu Web Browser is now loading full desktop sites, which is great. I expect it is just a matter of changing useragents (although there may be more to it). On the other hand on my tablet it is still showing mobile sites - which you may want to change from time to time. I suppose the default behaviour on phones and tablets should be to load mobile sites as it is now but - could you please add a switcher in the menu to demand for full desktop version of websites? In addition it would be great to include a button in the bowser's settings so that browser would permanently ask for desktop sites if user wants it. On bigger devices that would certainly be relevant. (and on the other hand you may want to display a mobile version of any website on desktop for testing purposes so a vice versa would be great as well) What do you think? How do you think it should be implemented? ** Affects: webbrowser-app (Ubuntu) Importance: Undecided Status: New ** This bug has been marked a duplicate of bug 1377033 [Browser] Ability to switch to the desktop mode (desktop version) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1473643 Title: Enable switching to full desktop sites Status in webbrowser-app package in Ubuntu: New Bug description: Hello, this is more like a feature request. I've just noticed that on desktop Ubuntu Web Browser is now loading full desktop sites, which is great. I expect it is just a matter of changing useragents (although there may be more to it). On the other hand on my tablet it is still showing mobile sites - which you may want to change from time to time. I suppose the default behaviour on phones and tablets should be to load mobile sites as it is now but - could you please add a switcher in the menu to demand for full desktop version of websites? In addition it would be great to include a button in the bowser's settings so that browser would permanently ask for desktop sites if user wants it. On bigger devices that would certainly be relevant. (and on the other hand you may want to display a mobile version of any website on desktop for testing purposes so a vice versa would be great as well) What do you think? How do you think it should be implemented? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1473643/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1408194] Re: package libltdl-dev 2.4.2-1.7ubuntu1 failed to install/upgrade: trying to overwrite shared '/usr/share/libtool/libltdl/Makefile.in', which is different from other in
*** This bug is a duplicate of bug 1313958 *** https://bugs.launchpad.net/bugs/1313958 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug 1313958, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 1313958 Can't install i386 version of libltdl-dev package, Makefile.in file can't be overwrited -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libtool in Ubuntu. https://bugs.launchpad.net/bugs/1408194 Title: package libltdl-dev 2.4.2-1.7ubuntu1 failed to install/upgrade: trying to overwrite shared '/usr/share/libtool/libltdl/Makefile.in', which is different from other instances of package libltdl-dev:i386 Status in libtool package in Ubuntu: New Bug description: the package didnt install ProblemType: Package DistroRelease: Ubuntu 14.04 Package: libltdl-dev 2.4.2-1.7ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-43.72-generic 3.13.11.11 Uname: Linux 3.13.0-43-generic x86_64 NonfreeKernelModules: wl nvidia ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 Date: Wed Jan 7 11:50:43 2015 DuplicateSignature: package:libltdl-dev:2.4.2-1.7ubuntu1:trying to overwrite shared '/usr/share/libtool/libltdl/Makefile.in', which is different from other instances of package libltdl-dev:i386 ErrorMessage: trying to overwrite shared '/usr/share/libtool/libltdl/Makefile.in', which is different from other instances of package libltdl-dev:i386 InstallationDate: Installed on 2014-12-23 (14 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) SourcePackage: libtool Title: package libltdl-dev 2.4.2-1.7ubuntu1 failed to install/upgrade: trying to overwrite shared '/usr/share/libtool/libltdl/Makefile.in', which is different from other instances of package libltdl-dev:i386 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libtool/+bug/1408194/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1359811] Re: package libltdl-dev 2.4.2-1.7ubuntu1 failed to install/upgrade: a tentar sobreescrever '/usr/share/libtool/libltdl/Makefile.in' partilhado, que é diferente de outras
*** This bug is a duplicate of bug 1313958 *** https://bugs.launchpad.net/bugs/1313958 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug 1313958, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 1313958 Can't install i386 version of libltdl-dev package, Makefile.in file can't be overwrited -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libtool in Ubuntu. https://bugs.launchpad.net/bugs/1359811 Title: package libltdl-dev 2.4.2-1.7ubuntu1 failed to install/upgrade: a tentar sobreescrever '/usr/share/libtool/libltdl/Makefile.in' partilhado, que é diferente de outras instâncias do pacote libltdl- dev:i386 Status in libtool package in Ubuntu: New Bug description: I I was executing this apt-get command below: apt-get -y --install-suggests install wine playonlinux unmass wine-mono0.0.8 wine-gecko2.21 gnome-exe-thumbnailer gnome-wine-icon-theme tellico winetricks ProblemType: Package DistroRelease: Ubuntu 14.04 Package: libltdl-dev 2.4.2-1.7ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4 Uname: Linux 3.13.0-34-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 Date: Thu Aug 21 11:39:42 2014 DuplicateSignature: package:libltdl-dev:2.4.2-1.7ubuntu1:a tentar sobreescrever '/usr/share/libtool/libltdl/Makefile.in' partilhado, que é diferente de outras instâncias do pacote libltdl-dev:i386 ErrorMessage: a tentar sobreescrever '/usr/share/libtool/libltdl/Makefile.in' partilhado, que é diferente de outras instâncias do pacote libltdl-dev:i386 InstallationDate: Installed on 2014-04-19 (124 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: libtool Title: package libltdl-dev 2.4.2-1.7ubuntu1 failed to install/upgrade: a tentar sobreescrever '/usr/share/libtool/libltdl/Makefile.in' partilhado, que é diferente de outras instâncias do pacote libltdl-dev:i386 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libtool/+bug/1359811/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1471478] Re: package libltdl-dev 2.4.2-1.11 failed to install/upgrade: trying to overwrite shared '/usr/share/libtool/libltdl/Makefile.in', which is different from other instance
*** This bug is a duplicate of bug 1313958 *** https://bugs.launchpad.net/bugs/1313958 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug 1313958, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 1313958 Can't install i386 version of libltdl-dev package, Makefile.in file can't be overwrited -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libtool in Ubuntu. https://bugs.launchpad.net/bugs/1471478 Title: package libltdl-dev 2.4.2-1.11 failed to install/upgrade: trying to overwrite shared '/usr/share/libtool/libltdl/Makefile.in', which is different from other instances of package libltdl-dev:i386 Status in libtool package in Ubuntu: New Bug description: trying to install guile-2.0-dev:i386 ProblemType: Package DistroRelease: Ubuntu 15.04 Package: libltdl-dev 2.4.2-1.11 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 Date: Sat Jul 4 14:16:23 2015 DuplicateSignature: package:libltdl-dev:2.4.2-1.11:trying to overwrite shared '/usr/share/libtool/libltdl/Makefile.in', which is different from other instances of package libltdl-dev:i386 ErrorMessage: trying to overwrite shared '/usr/share/libtool/libltdl/Makefile.in', which is different from other instances of package libltdl-dev:i386 InstallationDate: Installed on 2014-10-26 (251 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) RelatedPackageVersions: dpkg 1.17.25ubuntu1 apt 1.0.9.7ubuntu4 SourcePackage: libtool Title: package libltdl-dev 2.4.2-1.11 failed to install/upgrade: trying to overwrite shared '/usr/share/libtool/libltdl/Makefile.in', which is different from other instances of package libltdl-dev:i386 UpgradeStatus: Upgraded to vivid on 2015-04-25 (70 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libtool/+bug/1471478/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1313958] Re: Can't install i386 version of libltdl-dev package, Makefile.in file can't be overwrited
Based on duplicate bug 1471478, this bug is still present in libltdl-dev 2.4.2-1.11 on Ubuntu 15.04. ** Tags added: utopic vivid wily -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libtool in Ubuntu. https://bugs.launchpad.net/bugs/1313958 Title: Can't install i386 version of libltdl-dev package, Makefile.in file can't be overwrited Status in libtool package in Ubuntu: Confirmed Status in libtool package in Debian: New Bug description: Today I tried to install 2 i386 packages on my Ubuntu 14.04 64 bits version. I got this error: sudo apt install unixodbc-dev:i386 libmyodbc:i386 Reading package lists... Done Building dependency tree Reading state information... Done libmyodbc:i386 is already the newest version. The following extra packages will be installed: libltdl-dev:i386 libodbc1 unixodbc Suggested packages: libtool-doc:i386 libmyodbc odbc-postgresql tdsodbc unixodbc-bin The following NEW packages will be installed: libltdl-dev:i386 libodbc1 unixodbc unixodbc-dev:i386 0 upgraded, 4 newly installed, 0 to remove and 10 not upgraded. Need to get 0 B/563 kB of archives. After this operation, 3.071 kB of additional disk space will be used. Do you want to continue? [Y/n] y Selecting previously unselected package libodbc1:amd64. (Reading database ... 211935 files and directories currently installed.) Preparing to unpack .../libodbc1_2.2.14p2-5ubuntu5_amd64.deb ... Unpacking libodbc1:amd64 (2.2.14p2-5ubuntu5) ... Preparing to unpack .../libltdl-dev_2.4.2-1.7ubuntu1_i386.deb ... Unpacking libltdl-dev:i386 (2.4.2-1.7ubuntu1) ... dpkg: error processing archive /var/cache/apt/archives/libltdl-dev_2.4.2-1.7ubuntu1_i386.deb (--unpack): trying to overwrite shared '/usr/share/libtool/libltdl/Makefile.in', which is different from other instances of package libltdl-dev:i386 Selecting previously unselected package unixodbc. Preparing to unpack .../unixodbc_2.2.14p2-5ubuntu5_amd64.deb ... Unpacking unixodbc (2.2.14p2-5ubuntu5) ... Selecting previously unselected package unixodbc-dev. Preparing to unpack .../unixodbc-dev_2.2.14p2-5ubuntu5_i386.deb ... Unpacking unixodbc-dev (2.2.14p2-5ubuntu5) ... Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libltdl-dev_2.4.2-1.7ubuntu1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) darkhole@CO1WDJ39M6V1U:~$ Seems to be a multiarch related problem. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: libltdl-dev 2.4.2-1.7ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Mon Apr 28 17:17:19 2014 InstallationDate: Installed on 2013-10-21 (189 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) SourcePackage: libtool UpgradeStatus: Upgraded to trusty on 2014-04-21 (7 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libtool/+bug/1313958/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1468686] Re: screen not lock after 2 minutes not in use when set sleep when idleto 2 minutes
*** This bug is a duplicate of bug 1461476 *** https://bugs.launchpad.net/bugs/1461476 ** This bug has been marked a duplicate of bug 1461476 Display never sleeps -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1468686 Title: screen not lock after 2 minutes not in use when set sleep when idleto 2 minutes Status in unity8 package in Ubuntu: New Bug description: system-image-cli -i current build number: 120 device name: krillin channel: ubuntu-touch/devel-proposed/krillin.en last update: 2015-06-25 04:09:37 version version: 120 version ubuntu: 20150624 version device: 20150529-8e13c5f version custom: 20150528-722-29-15-vivid reproduce steps: 1. Set a passcode for device: System Settings - Security Privacy - Lock Phone - Lock Security - Inactivity timeout 2. Set it to 2 minutes 3. Go to the dashboard 4. Wait until the inactivity timeout goes off expected result: 1.screen locked after 2 minutes not in use actually result: 1.screen not lock after a few minutes. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1468686/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1473592] Re: URL keyboard layout should include common url characters
*** This bug is a duplicate of bug 1473591 *** https://bugs.launchpad.net/bugs/1473591 ** This bug has been marked a duplicate of bug 1473591 URL keyboard layout should include common url characters -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1473592 Title: URL keyboard layout should include common url characters Status in ubuntu-keyboard package in Ubuntu: New Bug description: when entering a URL the keyboard layout should include common URL keys such has : / -_ as modifiers for standard keys and not force the user to change to another keyboard layout To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-keyboard/+bug/1473592/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1364522] Re: Firefox crashes sometimes when using webgl with nouveau driver
For some reason the submission of new crashes at crash-stats.mozilla.com was stopping at 2015-06-16. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1364522 Title: Firefox crashes sometimes when using webgl with nouveau driver Status in firefox package in Ubuntu: New Status in mesa package in Ubuntu: New Bug description: Visiting with Firefox e.g. https://developer.mozilla.org/de/demos/detail/orange-slice/launch makes firefox crash. Program received signal SIGSEGV, Segmentation fault. nouveau_fence_next (screen=screen@entry=0x5a5a5a5a) at ../../../../../../src/gallium/drivers/nouveau/nouveau_fence.c:226 226if (screen-fence.current-state NOUVEAU_FENCE_STATE_EMITTING) (gdb) bt #0 nouveau_fence_next (screen=screen@entry=0x5a5a5a5a) at ../../../../../../src/gallium/drivers/nouveau/nouveau_fence.c:226 #1 0x9b5b7fc0 in nv30_context_kick_notify (push=0x9b8f62b0) at ../../../../../../src/gallium/drivers/nouveau/nv30/nv30_context.c:48 #2 0xa0a0ea3e in pushbuf_submit (push=push@entry=0x9b8f62b0, chan=optimized out, chan=optimized out) at ../../nouveau/pushbuf.c:325 #3 0xa0a0ed7a in pushbuf_flush (push=push@entry=0x9b8f62b0) at ../../nouveau/pushbuf.c:402 #4 0xa0a0faca in nouveau_pushbuf_kick (push=0x9b8f62b0, chan=0xa40c5420) at ../../nouveau/pushbuf.c:774 #5 0x9b5b811f in PUSH_KICK (push=optimized out) at ../../../../../../src/gallium/drivers/nouveau/nouveau_winsys.h:56 #6 nv30_context_flush (pipe=0x9b986000, fence=0x0, flags=0) at ../../../../../../src/gallium/drivers/nouveau/nv30/nv30_context.c:83 #7 0x9b4b4e1c in st_flush (st=st@entry=0x989e8000, fence=fence@entry=0x0, flags=flags@entry=0) at ../../../../src/mesa/state_tracker/st_cb_flush.c:87 #8 0x9b4b4e82 in st_glFlush (ctx=0x98844000) at ../../../../src/mesa/state_tracker/st_cb_flush.c:121 #9 0x9b3b3065 in _mesa_flush (ctx=ctx@entry=0x98844000) at ../../../../src/mesa/main/context.c:1691 #10 0x9b3b3130 in _mesa_make_current (newCtx=newCtx@entry=0x0, drawBuffer=drawBuffer@entry=0x0, readBuffer=readBuffer@entry=0x0) at ../../../../src/mesa/main/context.c:1503 #11 0x9b4dee74 in st_api_make_current (stapi=0x9b779700 st_gl_api, stctxi=0x0, stdrawi=0x0, streadi=0x0) at ../../../../src/mesa/state_tracker/st_manager.c:746 #12 0x9b59d9ee in dri_unbind_context (cPriv=0x994e3120) at ../../../../../../../src/gallium/state_trackers/dri/drm/dri_context.c:215 #13 0x9b38db93 in driUnbindContext (pcp=0x994e3120) at ../../../../../../../src/mesa/drivers/dri/common/dri_util.c:578 #14 0x9b7df149 in dri2_unbind_context (context=0x9b9cbc20, new=0x0) at ../../../../src/glx/dri2_glx.c:184 #15 0x9b7b7985 in MakeContextCurrent (dpy=dpy@entry=0xb7191000, draw=draw@entry=0, read=read@entry=0, gc_user=gc_user@entry=0x0) at ../../../../src/glx/glxcurrent.c:245 #16 0x9b7b7a73 in glXMakeCurrent (dpy=0xb7191000, draw=0, gc=0x0) at ../../../../src/glx/glxcurrent.c:293 #17 0xb3d3916d in mozilla::gl::GLXLibrary::xMakeCurrent (this=0xb6e58470 mozilla::gl::sGLXLibrary, display=0xb7191000, drawable=drawable@entry=0, context=context@entry=0x0) at /build/buildd/firefox-31.0+build1/gfx/gl/GLContextProviderGLX.cpp:525 #18 0xb3d39d92 in mozilla::gl::GLContextGLX::~GLContextGLX (this=0x988dc800, __in_chrg=optimized out) at /build/buildd/firefox-31.0+build1/gfx/gl/GLContextProviderGLX.cpp:836 #19 0xb3d39e12 in mozilla::gl::GLContextGLX::~GLContextGLX (this=0x988dc800, __in_chrg=optimized out) at /build/buildd/firefox-31.0+build1/gfx/gl/GLContextProviderGLX.cpp:845 #20 0xb3d38ea0 in mozilla::detail::GenericRefCounted(mozilla::detail::RefCountAtomicity)0::Release (this=0x988dc800) at ../../dist/include/mozilla/GenericRefCounted.h:95 #21 0xb3ddc635 in nsRefPtrmozilla::gl::GLContext::assign_assuming_AddRef (this=this@entry=0x9b8eb84c, newPtr=newPtr@entry=0x0) at ../../dist/include/nsAutoPtr.h:882 #22 0xb4561170 in assign_with_AddRef (rawPtr=0x0, this=0x9b8eb84c) at ../../../dist/include/nsAutoPtr.h:866 #23 operator= (rhs=0x0, this=0x9b8eb84c) at ../../../dist/include/nsAutoPtr.h:964 #24 mozilla::WebGLContext::DestroyResourcesAndContext (this=this@entry=0x9b8eb800) at /build/buildd/firefox-31.0+build1/content/canvas/src/WebGLContext.cpp:284 #25 0xb45611bb in mozilla::WebGLContext::~WebGLContext (this=0x9b8eb800, __in_chrg=optimized out) at /build/buildd/firefox-31.0+build1/content/canvas/src/WebGLContext.cpp:203 #26 0xb455e330 in mozilla::WebGL1Context::~WebGL1Context (this=0x9b8eb800, __in_chrg=optimized out) at /build/buildd/firefox-31.0+build1/content/canvas/src/WebGL1Context.cpp:25 #27 0xb455ebe9 in mozilla::WebGLContext::DeleteCycleCollectable (this=0x9b8eb800) at /build/buildd/firefox-31.0+build1/content/canvas/src/WebGLContext.cpp:1397 #28 0xb455ebbb in mozilla::WebGLContext::cycleCollection::DeleteCycleCollectable (this=0xb6e2b500
[Touch-packages] [Bug 1473624] [NEW] Installing apport on headless vivid machine results in hanging systemd
Public bug reported: I have installed ubuntu-15.04-server amd64 in a VM, selecting multiple server install with MAAS (to set up a standalone MAAS) using virt- manager. Trying to report a bug, I installed apport. This pulled in several dependencies, but ended up hanging at systemd install: http://pastebin.ubuntu.com/11859706/ Trying apt-get -f install didn't help either: http://pastebin.ubuntu.com/11859710/ ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: apport 2.17.2-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 Date: Sat Jul 11 06:42:36 2015 InstallationDate: Installed on 2015-07-11 (0 days ago) InstallationMedia: Ubuntu-Server 15.04 Vivid Vervet - Release amd64 (20150422) PackageArchitecture: all ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: apport UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: apport (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1473624 Title: Installing apport on headless vivid machine results in hanging systemd Status in apport package in Ubuntu: New Bug description: I have installed ubuntu-15.04-server amd64 in a VM, selecting multiple server install with MAAS (to set up a standalone MAAS) using virt-manager. Trying to report a bug, I installed apport. This pulled in several dependencies, but ended up hanging at systemd install: http://pastebin.ubuntu.com/11859706/ Trying apt-get -f install didn't help either: http://pastebin.ubuntu.com/11859710/ ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: apport 2.17.2-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 Date: Sat Jul 11 06:42:36 2015 InstallationDate: Installed on 2015-07-11 (0 days ago) InstallationMedia: Ubuntu-Server 15.04 Vivid Vervet - Release amd64 (20150422) PackageArchitecture: all ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: apport UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1473624/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1473542] Re: ubuntu-server daily iso - Upon installation, /etc/network/interfaces not populated with correct network interface names, so networking fails to start
I was about to say, missing ifnames in udeb. Thanks Adam! I'll commit the fixes to Debian. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1473542 Title: ubuntu-server daily iso - Upon installation, /etc/network/interfaces not populated with correct network interface names, so networking fails to start Status in debian-installer package in Ubuntu: Fix Released Status in systemd package in Ubuntu: Fix Released Bug description: Hello. I've installed today from the Ubuntu Server Daily ISO. During the installer process, we get the system identifying network interfaces with the traditional unpredictable naming algorithms of eth##. After installation, the system uses systemd to identify network interface names, per http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/ In the Virtual Environment i'm using, on VMware Workstation x64 with two virtual NICs, I end up with ens33 and ens34 according to the installed system. However, the installer populated the /etc/network/interfaces configuration with eth0 and eth1. As a result, networking fails to start up after a reboot, and either /etc/network/interfaces needs edited to match the correct identifiers and a reboot issued, or one has to do `sudo dhclient` to update the IP address. For static addressing networks, of course, you still need to revise the interfaces file. This is a serious issue, as upon installation via the ubuntu-server ISO, networking will fail to come up, leaving users to scratch their head expecting instant access. Due to an uncertainty in the severity, I've set it to High given that last point. Please feel free to change it. Note that this is filed against both systemd and netcfg as I am not sure which one needs to be fixed. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: systemd 222-1ubuntu1 ProcVersionSignature: Ubuntu 4.0.0-4.6-generic 4.0.7 Uname: Linux 4.0.0-4-generic x86_64 ApportVersion: 2.17.3-0ubuntu4 Architecture: amd64 Date: Fri Jul 10 15:15:17 2015 InstallationDate: Installed on 2015-07-10 (0 days ago) InstallationMedia: Ubuntu-Server 15.10 Wily Werewolf - Alpha amd64 (20150709) MachineType: VMware, Inc. VMware Virtual Platform ProcEnviron: TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.0.0-4-generic root=UUID=34413d00-2883-4593-a395-7c6b16e3cc6e ro SourcePackage: systemd UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/31/2013 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/31/2013:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1473542/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1473630] [NEW] close [X] is mispositioned when opening many tabs
Public bug reported: close [X] is mispositioned when opening many tabs screenshot http://i.imgur.com/lyvej9v.png ** Affects: webbrowser-app (Ubuntu) Importance: Undecided Status: New ** Attachment added: zz.png https://bugs.launchpad.net/bugs/1473630/+attachment/4427696/+files/zz.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1473630 Title: close [X] is mispositioned when opening many tabs Status in webbrowser-app package in Ubuntu: New Bug description: close [X] is mispositioned when opening many tabs screenshot http://i.imgur.com/lyvej9v.png To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1473630/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1471609] Re: Cannot unlock phone in landscape
lowering priority as to reproduce you need to do several out of the norm steps ** Changed in: canonical-devices-system-image Importance: Critical = High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1471609 Title: Cannot unlock phone in landscape Status in Canonical System Image: In Progress Status in unity8 package in Ubuntu: In Progress Bug description: Under some circumstances it's possible to have the phone locked, with some of the numbers for pin-unlock being off-screen, and thus untouchable. See screenshot. In this instance it's impossible to unlock the phone if your pin contains those off-screen digits. The way out is to Emergency call to trigger the dialer app which rotates the phone back to portrait or reboot the phone. The shell should probably rotate in lock screen and the digits should be on screen when in landscape. How to reproduce: * Open an app which can rotate * Rotate the phone to landscape * Open the app spread * Press the lock button while the app spread is open To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1471609/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1377033] Re: [Browser] Ability to switch to the desktop mode (desktop version)
I've just noticed that on desktop Ubuntu Web Browser is now loading full desktop sites, which is great. I expect it is just a matter of changing useragents (although there may be more to it). On the other hand on my tablet it is still showing mobile sites - which you may want to change from time to time. I suppose the default behaviour on phones and tablets should be to load mobile sites as it is now but - could you please add a switcher in the menu to demand for full desktop version of websites? In addition it would be great to include a button in the bowser's settings so that browser would permanently ask for desktop sites if user wants it. On bigger devices that would certainly be relevant. (and on the other hand you may want to display a mobile version of any website on desktop for testing purposes so a vice versa would be great as well) What do you think? How do you think it should be implemented? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1377033 Title: [Browser] Ability to switch to the desktop mode (desktop version) Status in Ubuntu UX: Triaged Status in webbrowser-app package in Ubuntu: Confirmed Bug description: As a mobile phone user I want to view the desktop version of website so that I can get most features out of the web. In stead of supporting to change user agents, I thinks it's fairly reasonable to be able to switch in between mobile and desktop mode for both desktop and touch version. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-ux/+bug/1377033/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1473562] Re: Too many crash files kill the device
** Also affects: apport (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1473562 Title: Too many crash files kill the device Status in Canonical System Image: New Status in apport package in Ubuntu: New Bug description: Tested on krillin. TEST CASE: 1. adb shell to the phone and create a crash file $ sh -c 'kill -SEGV $$' 2. Now create dozens $ for n in $(seq 50); do ln /var/crash/_bin_dash.32011.crash /var/crash/_bin_dash_${n}.32011.crash; done 3. Remove any upload and uploaded files that have been created and reboot $ sudo rm /var/crash/*upload* sudo reboot ACTUAL RESULT Lot of whoopsie-upload-all and apport processes are created on boot, consume all the resources of the system and make the phone unbootable or partially functional. OOM killer kills random system tasks such as upstart. Depending on the processes killed, the phone hangs on boot, reboots, dash doesn't come up... The number of crashes in this test is a bit excessive but we can imagine a scenario where a dozen of crash files are not uploaded because the phone is on cellular data, and uploads everything when it connects to wifi, disabling the user session. A way to recover is to go into recovery and clean /var/crash. EXPECTED RESULT crash uploads are serialized and can be uploaded only one at a time If system resources are already low, the crash file is not uploaded. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1473562/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1424263] Re: Broken dependencies
I think it not Ubuntu bug but steam client bug, so i open ticket in steam support, mb thay make fix. https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1424263/comments/15 also work for me. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1424263 Title: Broken dependencies Status in mesa package in Ubuntu: Confirmed Status in steam package in Ubuntu: Confirmed Bug description: I can not install Steam from Steam website because reported package has broken dependencies. This bug affect any user that will install Ubuntu 14.04.2. Please fix it fast, cause i can not play my games on Linux. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: libgl1-mesa-dri:i386 (not installed) ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3 Uname: Linux 3.16.0-30-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 346.35 Sat Jan 10 21:27:15 PST 2015 GCC version: gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CurrentDesktop: Unity Date: Sat Feb 21 21:40:49 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: nvidia, 346.35, 3.16.0-30-generic, x86_64: installed GraphicsCard: NVIDIA Corporation GM107 [GeForce GTX 750 Ti] [10de:1380] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:84ac] InstallationDate: Installed on 2015-02-20 (1 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic.efi.signed root=UUID=ea315497-1076-4f76-a2da-dc65caca572f ro quiet splash loglevel=0 vt.handoff=7 SourcePackage: mesa UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/09/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P2.10 dmi.board.name: H87 Pro4 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP2.10:bd07/09/2014:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnH87Pro4:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. version.compiz: compiz 1:0.9.11.3+14.04.20150122-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1~ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Sat Feb 21 17:22:09 2015 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1424263/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1371920] Re: Bluetooth headphones don't show as output device in pavucontrol
*** This bug is a duplicate of bug 1464998 *** https://bugs.launchpad.net/bugs/1464998 ** This bug has been marked a duplicate of bug 1464998 A2DP headet sink doesn't appear -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1371920 Title: Bluetooth headphones don't show as output device in pavucontrol Status in pulseaudio package in Ubuntu: New Bug description: I have a Sennheiser MM450-X which are connected to the audio sink (Bluetooth Devices - Connect to audio sink) correctly, but they don't show in the pavucontrol output devices, so I can't use them. I can reproduce this bug every time. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio-module-bluetooth 1:4.0-0ubuntu11 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic x86_64 NonfreeKernelModules: zfs zunicode zavl zcommon znvpair ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: saverio2824 F pulseaudio /dev/snd/pcmC1D0p: saverio2824 F...m pulseaudio /dev/snd/controlC0: saverio2824 F pulseaudio /dev/snd/pcmC0D3p: saverio2824 F...m pulseaudio CurrentDesktop: XFCE Date: Sat Sep 20 15:15:09 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2014-09-05 (14 days ago) InstallationMedia: Xubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140723) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F1 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: F2A88XN-WIFI dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF1:bd09/04/2013:svnGigabyteTechnologyCo.,Ltd.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnF2A88XN-WIFI:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Gigabyte Technology Co., Ltd. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2014-09-09T23:57:54.620518 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1371920/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1464994] Re: Low audio volume on Thinkpad Helix
Can you give me more detailed instructions on how to do this (report upstream, search in the registry)? I've searched preamp and pre-amp in the windows registry, but couldn't find anything. I'm aware of the clipping cause - I was pointing that, given that the volume is low, raising it above 100% (which causes clipping) is the only way to have loud enough audio. Thanks! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1464994 Title: Low audio volume on Thinkpad Helix Status in pulseaudio package in Ubuntu: New Bug description: I have a Thinkpad Helix, which I dual boot with Windows 8.x and Ubuntu. The audio volume in Ubuntu is low, compared to Windows, even when the device output is set on 100%. For example, when I watch something, on VLC, I can increase both the VLC volume and the device output to more than 100%, say 130% each; in this case, I reach a volume comparable to Windows, but in this case is clipped. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: pulseaudio 1:6.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: saverio1635 F pulseaudio CurrentDesktop: XFCE Date: Sun Jun 14 13:17:10 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2015-06-14 (0 days ago) InstallationMedia: Xubuntu 15.04 Vivid Vervet - Release amd64 (20150422.1) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/17/2014 dmi.bios.vendor: LENOVO dmi.bios.version: GFET50WW (1.29 ) dmi.board.asset.tag: Not Available dmi.board.name: 37023L0 dmi.board.vendor: LENOVO dmi.board.version: Win8 Pro MBR TPG dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrGFET50WW(1.29):bd09/17/2014:svnLENOVO:pn37023L0:pvrThinkPadHelix:rvnLENOVO:rn37023L0:rvrWin8ProMBRTPG:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 37023L0 dmi.product.version: ThinkPad Helix dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1464994/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1466009] Re: Cannot add U1 account on Unity8 Desktop
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: apparmor-easyprof-ubuntu (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor-easyprof-ubuntu in Ubuntu. https://bugs.launchpad.net/bugs/1466009 Title: Cannot add U1 account on Unity8 Desktop Status in apparmor-easyprof-ubuntu package in Ubuntu: Confirmed Status in ubuntu-system-settings-online-accounts package in Ubuntu: Confirmed Bug description: Using https://wiki.ubuntu.com/Unity8inLXC on my Wily desktop I setup a Unity8 login I cannot add an Ubuntu One account. System settings - Accounts - Add account - Click Ubuntu One. Window flickers briefly, no expected dialog to enter credentials appears. http://paste.ubuntu.com/11729603/ is my .cache/upstart/application- legacy-ubuntu-system-settings-.log ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: ubuntu-system-settings 0.3+15.10.20150615-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.3-0ubuntu4 Architecture: amd64 Date: Wed Jun 17 10:21:55 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2012-01-02 (1261 days ago) InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha amd64 (20120102) SourcePackage: ubuntu-system-settings UpgradeStatus: Upgraded to wily on 2015-05-28 (19 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor-easyprof-ubuntu/+bug/1466009/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1397885] Re: [Atheros AR9462] Bluetooth looks activated but cannot be used
*** This bug is a duplicate of bug 1394368 *** https://bugs.launchpad.net/bugs/1394368 Hello ! The patch in comment #7 seems to consider my bluetooth adapter as a AR3012 ship. According to https://wireless.wiki.kernel.org/en/users/drivers/ath3k, it seems to be a AR3011 ship: How to tell AR3011 and AR3012 You can use lsusb -v to check the device descriptor. If it's AR3011, the iProduct value is 0. If it's AR3012 the iProduct value is 2. The iProduct of by device seems to be 0, so my device seems to be a AR3011 ship. According to the same page, if I got it correct, the firmware to use for AR3011 is ath3k-1.fw, not AthrBT_*.dfu and ramps_0x*_40.dfu. Do you know how to tell ath3k to consider my device as a AR3011 ship? lsusb -v: [...] Bus 001 Device 015: ID 04ca:300d Lite-On Technology Corp. Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 224 Wireless bDeviceSubClass 1 Radio Frequency bDeviceProtocol 1 Bluetooth bMaxPacketSize064 idVendor 0x04ca Lite-On Technology Corp. idProduct 0x300d bcdDevice0.01 iManufacturer 0 iProduct0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 177 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes1 Transfer TypeIsochronous Synch Type None Usage Type Data wMaxPacketSize 0x 1x 0 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes1 Transfer TypeIsochronous Synch Type None Usage Type Data wMaxPacketSize 0x 1x 0 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes1 Transfer TypeIsochronous Synch Type None Usage Type Data wMaxPacketSize 0x0009 1x 9 bytes bInterval 1 Endpoint Descriptor: bLength 7
[Touch-packages] [Bug 1473667] [NEW] QTCreator Failed to parse plugins.qmltypes
Public bug reported: I'm trying to make a simple appa using android-sdk, i get this error when trying to use QT Creator : [17:04:01] ii click-reviewers-tools 0.32-0~503~ubuntu15.04.1 Warnings while parsing QML type information of /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components: Failed to parse '/var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes'. Error: /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes:1001:19: Un littéral chaîne qui contient Package/Name major.minor or Name major.minor est attendu. /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes:1002:36: Un littéral tableau avec uniquement des membres littérals numérique est attendu. /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes:1020:19: Un littéral chaîne qui contient Package/Name major.minor or Name major.minor est attendu. /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes:1021:36: Un littéral tableau avec uniquement des membres littérals numérique est attendu. /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes:1030:19: Un littéral chaîne qui contient Package/Name major.minor or Name major.minor est attendu. /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes:1031:36: Un littéral tableau avec uniquement des membres littérals numérique est attendu. /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes:1039:19: Un littéral chaîne qui contient Package/Name major.minor or Name major.minor est attendu. /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes:1040:36: Un littéral tableau avec uniquement des membres littérals numérique est attendu. /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes:1057:19: Un littéral chaîne qui contient Package/Name major.minor or Name major.minor est attendu. /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes:1058:36: Un littéral tableau avec uniquement des membres littérals numérique est attendu. Warnings while parsing QML type information of /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/QtMultimedia: Failed to parse '/var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/QtMultimedia/plugins.qmltypes'. Error: /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux-gnueabihf/qt5/qml/QtMultimedia/plugins.qmltypes:0:0: Un seul import est attendu. /var/lib/schroot/chroots/click-ubuntu-sdk-15.04-armhf/usr/lib/arm-linux- gnueabihf/qt5/qml/Ubuntu/Components/plugins.qmltypes When editing with Kate, the end of the file is : Component { prototype: QObject name: Haptics exports: [Haptics -1.-1] exportMetaObjectRevisions: [-1] isComposite: true isCreatable: false isSingleton: true defaultProperty: children Property { name: enabled; type: bool; isReadonly: true } Property { name: effect; type: QDeclarativeHapticsEffect; isReadonly: true; isPointer: true } Method { name: play type: QVariant Parameter { name: customEffect; type: QVariant } } Property { name: __defaultPropertyFix; type: QObject; isList: true; isReadonly: true } Property { name: children; type: QObject; isList: true; isReadonly: true } } Component { prototype: QObject name: Object exports: [Object -1.-1] exportMetaObjectRevisions: [-1] isComposite: true defaultProperty: children Property { name: __defaultPropertyFix; type: QObject; isList: true; isReadonly: true } Property { name: children; type: QObject; isList: true; isReadonly: true } } Component { prototype: QObject name: Palette exports: [Palette -1.-1] exportMetaObjectRevisions: [-1] isComposite: true Property { name: normal; type: PaletteValues_QMLTYPE_6; isPointer: true } Property { name: selected; type: PaletteValues_QMLTYPE_6; isPointer: true } } Component { prototype: QObject name: PaletteValues exports:
[Touch-packages] [Bug 1473663] Re: package perl 5.20.1-1 [modified: usr/bin/config_data] failed to install/upgrade: pre-dependency problem - not installing perl
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to perl in Ubuntu. https://bugs.launchpad.net/bugs/1473663 Title: package perl 5.20.1-1 [modified: usr/bin/config_data] failed to install/upgrade: pre-dependency problem - not installing perl Status in perl package in Ubuntu: New Bug description: Earlier got message that the perl package was not installing because it was already present on the system. This is during a kubuntu upgrade using muon updater. ProblemType: Package DistroRelease: Ubuntu 15.04 Package: perl 5.20.1-1 [modified: usr/bin/config_data] ProcVersionSignature: Ubuntu 3.16.0-43.58-generic 3.16.7-ckt13 Uname: Linux 3.16.0-43-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.7-0ubuntu8.5 Architecture: amd64 Date: Sat Jul 11 12:52:18 2015 DuplicateSignature: package:perl:5.20.1-1 [modified: usr/bin/config_data]:pre-dependency problem - not installing perl ErrorMessage: pre-dependency problem - not installing perl SourcePackage: perl Title: package perl 5.20.1-1 [modified: usr/bin/config_data] failed to install/upgrade: pre-dependency problem - not installing perl UpgradeStatus: Upgraded to vivid on 2015-07-11 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/perl/+bug/1473663/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1409332] Re: Mouse cursor freezes, when using e.g. youtube in chromium, and stays that way
Still occurs with chromium-browser Version 43.0.2357.130 Ubuntu 14.04 (64-bit) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1409332 Title: Mouse cursor freezes, when using e.g. youtube in chromium, and stays that way Status in xorg package in Ubuntu: Expired Bug description: I can not make this happen, if I use Firefox, but it happens, if I use Chromium browser and play youtube video. Visible mouse cursor stops moving. Still I can move mouse and use it, but it is hard, when you don't see where the cursor effectively is. This seems to happen only, if I have hardware acceleration enabled in advanced settings. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: chromium-browser 39.0.2171.65-0ubuntu0.14.04.1.1064 ProcVersionSignature: Ubuntu 3.13.0-43.72-lowlatency 3.13.11.11 Uname: Linux 3.13.0-43-lowlatency x86_64 ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Jan 10 22:23:29 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2014-09-21 (111 days ago) InstallationMedia: Ubuntu-Studio 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.1) SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) modified.conffile..etc.default.chromium.browser: [deleted] mtime.conffile..etc.chromium.browser.default: 2014-09-28T10:04:54.426898 --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CurrentDesktop: XFCE CurrentDmesg: [ 373.553548] perf samples too long (2509 2500), lowering kernel.perf_event_max_sample_rate to 5 DRM.card0.VGA.1: edid-base64: AP///wAebW9DLDQEABEPAQNuIht46i7lpFdKnCURUFSla4AxT0VPYU+BgAEBAQEBAQEBMCoAmFEAKkAwcBMAUg4RAAAe/QA4Sx5TDgAKICAgICAg/ABMMTcxNVMKICAgICAg/AAKICAgICAgICAgICAgAJg= dpms: On modes: 1280x1024 1280x1024 1152x864 1024x768 1024x768 1024x768 832x624 800x600 800x600 640x480 640x480 720x400 enabled: enabled status: connected Desktop-Session: 'ubuntustudio' '/etc/xdg/xdg-ubuntustudio:/usr/share/upstart/xdg:/etc/xdg:/etc/xdg' '/usr/share/ubuntustudio:/usr/share/xfce4:/usr/local/share/:/usr/share/:/usr/share' DetectedPlugins: DistroRelease: Ubuntu 14.04 EcryptfsInUse: Yes Env: 'None' 'None' InstallationDate: Installed on 2014-09-21 (180 days ago) InstallationMedia: Ubuntu-Studio 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.1) Load-Avg-1min: 0.61 Load-Processes-Running-Percent: 0.2% MachineType: Dell Inc. OptiPlex 745 Package: xorg PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-46-lowlatency root=UUID=d012c1bd-7e56-4035-b321-38d20cb14421 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-46.79-lowlatency 3.13.11-ckt15 Tags: trusty Uname: Linux 3.13.0-46-lowlatency x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip lp lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 06/26/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: 2.6.6 dmi.board.name: 0RF703 dmi.board.vendor: Dell Inc. dmi.chassis.type: 6 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr2.6.6:bd06/26/2011:svnDellInc.:pnOptiPlex745:pvr:rvnDellInc.:rn0RF703:rvr:cvnDellInc.:ct6:cvr: dmi.product.name: OptiPlex 745 dmi.sys.vendor: Dell Inc. modified.conffile..etc.default.chromium.browser: [deleted] mtime.conffile..etc.chromium.browser.default: 2014-09-28T10:04:54.426899 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1409332/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1473674] [NEW] apt fails a test from the testsuite on ppc64el when built with gcc-5 and -O3
Public bug reported: to reproduce: - wily chroot - PPA https://launchpad.net/~ci-train-ppa-service/+archive/ubuntu/landing-016/ (this holds gcc-5 as the default, branch 20150711). - dpkg-buildpackage -B note that explicitly using the gcc-5/g++-5 from wily doesn't show the test failure. the only difference in the configuration is that the one in wily is built using the old libstdc++ ABI and the one in the PPA with the dual ABI defaulting to new/c++11. building with -O2 instead of -O3 works around the issue. [ RUN ] CDROMTest.FindPackages /scratch/doko/tmp/apt-1.0.9.10ubuntu1/test/libapt/cdromfindpackages_test.cc:95: Failure Value of: InfoDir Actual: Expected: path + /.disk/ Which is: /tmp/apt-tests-findpackage.gpopMw/.disk/ [ FAILED ] CDROMTest.FindPackages (4 ms) ** Affects: apt (Ubuntu) Importance: High Status: Confirmed ** Affects: gcc-5 (Ubuntu) Importance: High Status: New ** Affects: apt (Ubuntu Wily) Importance: High Status: Confirmed ** Affects: gcc-5 (Ubuntu Wily) Importance: High Status: New ** Also affects: gcc-5 (Ubuntu) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Wily) Importance: Undecided Status: New ** Also affects: gcc-5 (Ubuntu Wily) Importance: Undecided Status: New ** Changed in: apt (Ubuntu Wily) Status: New = Confirmed ** Changed in: apt (Ubuntu Wily) Importance: Undecided = High ** Changed in: gcc-5 (Ubuntu Wily) Importance: Undecided = High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1473674 Title: apt fails a test from the testsuite on ppc64el when built with gcc-5 and -O3 Status in apt package in Ubuntu: Confirmed Status in gcc-5 package in Ubuntu: New Status in apt source package in Wily: Confirmed Status in gcc-5 source package in Wily: New Bug description: to reproduce: - wily chroot - PPA https://launchpad.net/~ci-train-ppa-service/+archive/ubuntu/landing-016/ (this holds gcc-5 as the default, branch 20150711). - dpkg-buildpackage -B note that explicitly using the gcc-5/g++-5 from wily doesn't show the test failure. the only difference in the configuration is that the one in wily is built using the old libstdc++ ABI and the one in the PPA with the dual ABI defaulting to new/c++11. building with -O2 instead of -O3 works around the issue. [ RUN ] CDROMTest.FindPackages /scratch/doko/tmp/apt-1.0.9.10ubuntu1/test/libapt/cdromfindpackages_test.cc:95: Failure Value of: InfoDir Actual: Expected: path + /.disk/ Which is: /tmp/apt-tests-findpackage.gpopMw/.disk/ [ FAILED ] CDROMTest.FindPackages (4 ms) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1473674/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1473678] Re: [U40Sd, Intel ID 2805, Digital Out, HDMI] No sound at all
I tryed installing oem-audio-daily-dkms, it made laptop's sound better, but didn't change the HDMI -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1473678 Title: [U40Sd, Intel ID 2805, Digital Out, HDMI] No sound at all Status in pulseaudio package in Ubuntu: New Bug description: I am trying to play sound on TV via HDMI, and have no sound. There are HDMI option in sound controls, ALSA seems OK, but no sound at all. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11.1 ProcVersionSignature: Ubuntu 3.13.0-58.97-generic 3.13.11-ckt22 Uname: Linux 3.13.0-58-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ldvsoft 12776 F pulseaudio /dev/snd/pcmC0D0c: ldvsoft 12776 F...m pulseaudio /dev/snd/pcmC0D3p: ldvsoft 12776 F...m pulseaudio CurrentDesktop: Unity Date: Sat Jul 11 22:59:14 2015 InstallationDate: Installed on 2014-08-31 (314 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: pulseaudio Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH successful Symptom_Card: Встроенное аудио - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ldvsoft 12776 F pulseaudio /dev/snd/pcmC0D0c: ldvsoft 12776 F...m pulseaudio /dev/snd/pcmC0D3p: ldvsoft 12776 F...m pulseaudio Symptom_Jack: Digital Out, HDMI Symptom_PulsePlaybackTest: PulseAudio playback test failed Symptom_Type: No sound at all Title: [U40Sd, Intel ID 2805, Digital Out, HDMI] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/16/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: U40Sd.202 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: U40Sd dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrU40Sd.202:bd06/16/2011:svnASUSTeKComputerInc.:pnU40Sd:pvr1.0:rvnASUSTeKComputerInc.:rnU40Sd:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0: dmi.product.name: U40Sd dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. modified.conffile..etc.pulse.daemon.conf: [modified] modified.conffile..etc.xdg.autostart.pulseaudio.desktop: [modified] mtime.conffile..etc.pulse.daemon.conf: 2014-10-31T01:00:14.774696 mtime.conffile..etc.xdg.autostart.pulseaudio.desktop: 2015-03-19T14:31:52.568787 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1473678/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1473663] [NEW] package perl 5.20.1-1 [modified: usr/bin/config_data] failed to install/upgrade: pre-dependency problem - not installing perl
Public bug reported: Earlier got message that the perl package was not installing because it was already present on the system. This is during a kubuntu upgrade using muon updater. ProblemType: Package DistroRelease: Ubuntu 15.04 Package: perl 5.20.1-1 [modified: usr/bin/config_data] ProcVersionSignature: Ubuntu 3.16.0-43.58-generic 3.16.7-ckt13 Uname: Linux 3.16.0-43-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.7-0ubuntu8.5 Architecture: amd64 Date: Sat Jul 11 12:52:18 2015 DuplicateSignature: package:perl:5.20.1-1 [modified: usr/bin/config_data]:pre-dependency problem - not installing perl ErrorMessage: pre-dependency problem - not installing perl SourcePackage: perl Title: package perl 5.20.1-1 [modified: usr/bin/config_data] failed to install/upgrade: pre-dependency problem - not installing perl UpgradeStatus: Upgraded to vivid on 2015-07-11 (0 days ago) ** Affects: perl (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package dist-upgrade need-duplicate-check third-party-packages vivid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to perl in Ubuntu. https://bugs.launchpad.net/bugs/1473663 Title: package perl 5.20.1-1 [modified: usr/bin/config_data] failed to install/upgrade: pre-dependency problem - not installing perl Status in perl package in Ubuntu: New Bug description: Earlier got message that the perl package was not installing because it was already present on the system. This is during a kubuntu upgrade using muon updater. ProblemType: Package DistroRelease: Ubuntu 15.04 Package: perl 5.20.1-1 [modified: usr/bin/config_data] ProcVersionSignature: Ubuntu 3.16.0-43.58-generic 3.16.7-ckt13 Uname: Linux 3.16.0-43-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.7-0ubuntu8.5 Architecture: amd64 Date: Sat Jul 11 12:52:18 2015 DuplicateSignature: package:perl:5.20.1-1 [modified: usr/bin/config_data]:pre-dependency problem - not installing perl ErrorMessage: pre-dependency problem - not installing perl SourcePackage: perl Title: package perl 5.20.1-1 [modified: usr/bin/config_data] failed to install/upgrade: pre-dependency problem - not installing perl UpgradeStatus: Upgraded to vivid on 2015-07-11 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/perl/+bug/1473663/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1473678] [NEW] [U40Sd, Intel ID 2805, Digital Out, HDMI] No sound at all
Public bug reported: I am trying to play sound on TV via HDMI, and have no sound. There are HDMI option in sound controls, ALSA seems OK, but no sound at all. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11.1 ProcVersionSignature: Ubuntu 3.13.0-58.97-generic 3.13.11-ckt22 Uname: Linux 3.13.0-58-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ldvsoft 12776 F pulseaudio /dev/snd/pcmC0D0c: ldvsoft 12776 F...m pulseaudio /dev/snd/pcmC0D3p: ldvsoft 12776 F...m pulseaudio CurrentDesktop: Unity Date: Sat Jul 11 22:59:14 2015 InstallationDate: Installed on 2014-08-31 (314 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: pulseaudio Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH successful Symptom_Card: Встроенное аудио - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ldvsoft 12776 F pulseaudio /dev/snd/pcmC0D0c: ldvsoft 12776 F...m pulseaudio /dev/snd/pcmC0D3p: ldvsoft 12776 F...m pulseaudio Symptom_Jack: Digital Out, HDMI Symptom_PulsePlaybackTest: PulseAudio playback test failed Symptom_Type: No sound at all Title: [U40Sd, Intel ID 2805, Digital Out, HDMI] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/16/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: U40Sd.202 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: U40Sd dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrU40Sd.202:bd06/16/2011:svnASUSTeKComputerInc.:pnU40Sd:pvr1.0:rvnASUSTeKComputerInc.:rnU40Sd:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0: dmi.product.name: U40Sd dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. modified.conffile..etc.pulse.daemon.conf: [modified] modified.conffile..etc.xdg.autostart.pulseaudio.desktop: [modified] mtime.conffile..etc.pulse.daemon.conf: 2014-10-31T01:00:14.774696 mtime.conffile..etc.xdg.autostart.pulseaudio.desktop: 2015-03-19T14:31:52.568787 ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug third-party-packages trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1473678 Title: [U40Sd, Intel ID 2805, Digital Out, HDMI] No sound at all Status in pulseaudio package in Ubuntu: New Bug description: I am trying to play sound on TV via HDMI, and have no sound. There are HDMI option in sound controls, ALSA seems OK, but no sound at all. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11.1 ProcVersionSignature: Ubuntu 3.13.0-58.97-generic 3.13.11-ckt22 Uname: Linux 3.13.0-58-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ldvsoft 12776 F pulseaudio /dev/snd/pcmC0D0c: ldvsoft 12776 F...m pulseaudio /dev/snd/pcmC0D3p: ldvsoft 12776 F...m pulseaudio CurrentDesktop: Unity Date: Sat Jul 11 22:59:14 2015 InstallationDate: Installed on 2014-08-31 (314 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: pulseaudio Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH successful Symptom_Card: Встроенное аудио - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ldvsoft 12776 F pulseaudio /dev/snd/pcmC0D0c: ldvsoft 12776 F...m pulseaudio /dev/snd/pcmC0D3p: ldvsoft 12776 F...m pulseaudio Symptom_Jack: Digital Out, HDMI Symptom_PulsePlaybackTest: PulseAudio playback test failed Symptom_Type: No sound at all Title: [U40Sd, Intel ID 2805, Digital Out, HDMI] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/16/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: U40Sd.202 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: U40Sd dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrU40Sd.202:bd06/16/2011:svnASUSTeKComputerInc.:pnU40Sd:pvr1.0:rvnASUSTeKComputerInc.:rnU40Sd:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0: dmi.product.name: U40Sd dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. modified.conffile..etc.pulse.daemon.conf: [modified]
[Touch-packages] [Bug 1473674] Re: apt fails a test from the testsuite on ppc64el when built with gcc-5 and -O3
the test fails too on amd64 with -O3 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1473674 Title: apt fails a test from the testsuite on ppc64el when built with gcc-5 and -O3 Status in apt package in Ubuntu: Confirmed Status in gcc-5 package in Ubuntu: New Status in apt source package in Wily: Confirmed Status in gcc-5 source package in Wily: New Bug description: to reproduce: - wily chroot - PPA https://launchpad.net/~ci-train-ppa-service/+archive/ubuntu/landing-016/ (this holds gcc-5 as the default, branch 20150711). - dpkg-buildpackage -B note that explicitly using the gcc-5/g++-5 from wily doesn't show the test failure. the only difference in the configuration is that the one in wily is built using the old libstdc++ ABI and the one in the PPA with the dual ABI defaulting to new/c++11. building with -O2 instead of -O3 works around the issue. [ RUN ] CDROMTest.FindPackages /scratch/doko/tmp/apt-1.0.9.10ubuntu1/test/libapt/cdromfindpackages_test.cc:95: Failure Value of: InfoDir Actual: Expected: path + /.disk/ Which is: /tmp/apt-tests-findpackage.gpopMw/.disk/ [ FAILED ] CDROMTest.FindPackages (4 ms) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1473674/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1445892] Re: There is no wifi after hybernate mode with systemd-boot
The bug still exists -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1445892 Title: There is no wifi after hybernate mode with systemd-boot Status in NetworkManager: New Status in network-manager package in Ubuntu: Confirmed Bug description: You close notebooke, then you open it- and there is no wifi. You have to restart network-manager for obtaining wi-fi again ! If you choose upstart-boot option there is no problem with wifi after hybernation. Bug occures unly with systemd-boot ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu15 ProcVersionSignature: Ubuntu 3.19.0-14.14-generic 3.19.3 Uname: Linux 3.19.0-14-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Sun Apr 19 13:09:18 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-10-18 (547 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) IpRoute: default via 10.0.1.1 dev wlan0 proto static metric 1024 10.0.1.0/24 dev wlan0 proto kernel scope link src 10.0.1.18 169.254.0.0/16 dev wlan0 scope link metric 1000 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH k3b 66a32a2c-3eac-46e3-a111-0c63e94bd135 802-11-wireless 1429438056 Вс. 19 апр. 2015 13:07:36 yes no /org/freedesktop/NetworkManager/Settings/0 yes wlan0 activated /org/freedesktop/NetworkManager/ActiveConnection/4 nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH wlan0 wifi connected /org/freedesktop/NetworkManager/Devices/1 k3b 66a32a2c-3eac-46e3-a111-0c63e94bd135 /org/freedesktop/NetworkManager/ActiveConnection/4 lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1445892/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1468027] Re: change default CJK fonts to Noto CJK
I agree that using 69-language-selectors-*.conf is more flexible IF ubuntu resulted to use Regional Subset OTF instead of Super OTC. We should not fallback a sans-serif font to serif. Also, they provide fixed width font for regular and bold weight font start from 1.002, as known as Source Han Sans HW or Noto Sans Mono CJK. As their monospace fonts(english letters) are designed for SHS/Noto, i don't see the point to fallback DejaVu Sans Mono. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-meta in Ubuntu. https://bugs.launchpad.net/bugs/1468027 Title: change default CJK fonts to Noto CJK Status in fonts-noto package in Ubuntu: New Status in language-selector package in Ubuntu: New Status in ubuntu-meta package in Ubuntu: New Bug description: just realize that fonts-noto-cjk is available in the repository, finally its packaged. i don't really know about korean community. But for Chinese and Japanese community, i think that the answer is clear. noto-cjk is definitely better what we had before, like fonts- wqy and fonts-droid. Android community had received these complains for years, finally they got them fixed on lollipop. Fedora also set it as default chinese font start from F21. and of course, i still hope that ubuntu could drop those 69-language-selector fontconfig files, just like what F13 did. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fonts-noto/+bug/1468027/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1440583] Re: calendar-app is generating invalid RECUR values in RRULE property
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: qtorganizer5-eds (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtorganizer5-eds in Ubuntu. https://bugs.launchpad.net/bugs/1440583 Title: calendar-app is generating invalid RECUR values in RRULE property Status in Ubuntu Calendar App: In Progress Status in qtorganizer5-eds package in Ubuntu: Confirmed Bug description: I created a calendar event for April 24 at 1:35 PM, with a reminder the day before. This is the ~/.local/share/evolution/calendar/system/calendar.ics file that was created, note the X-LIC-ERROR. Tested with calendar-app 0.4.600 on krillin rtm r263. BEGIN:VCALENDAR CALSCALE:GREGORIAN PRODID:-//Ximian//NONSGML Evolution Calendar//EN VERSION:2.0 X-EVOLUTION-DATA-REVISION:2015-04-05T19:06:51.703615Z(2) BEGIN:VEVENT UID:20150405T190651Z-4388-32011-1709-1@ubuntu-phablet DTSTAMP:20150405T190651Z DTSTART:20150424T183500Z DTEND:20150424T193500Z X-LIC-ERROR;X-LIC-ERRORTYPE=VALUE-PARSE-ERROR:Can't parse as RECUR value in RRULE property. Removing entire property: ERROR: No Value SUMMARY:London Sprint Flight DESCRIPTION:Time to pack! CREATED:20150405T190651Z LAST-MODIFIED:20150405T190651Z BEGIN:VALARM X-EVOLUTION-ALARM-UID:20150405T190651Z-4388-32011-1709-2@ubuntu-phablet ACTION:AUDIO TRIGGER;VALUE=DURATION;RELATED=START:-P1D REPEAT:3 DURATION:PT2M END:VALARM BEGIN:VALARM X-EVOLUTION-ALARM-UID:20150405T190651Z-4388-32011-1709-3@ubuntu-phablet ACTION:DISPLAY DESCRIPTION:London Sprint Flight TRIGGER;VALUE=DURATION;RELATED=START:-P1D REPEAT:3 DURATION:PT2M END:VALARM END:VEVENT END:VCALENDAR To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-calendar-app/+bug/1440583/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1440583] Re: calendar-app is generating invalid RECUR values in RRULE property
For event occurs once, we can see warning info in ~/.local/share/evolution/calendar/system/calendar.ics X-LIC-ERROR;X-LIC-ERRORTYPE=VALUE-PARSE-ERROR:Can't parse as RECUR value in RRULE property. Removing entire property: ERROR: No Value Reason for this is because for event occurs once, we assign default recurrence rule with RecurrenceRule.Invalid to this event.Basically, recurrenceRules for nonrepeating event should be an empty array in this case. App bug, unrelated to qtorganizer5-eds, which works fine. Expect result: BEGIN:VEVENT UID:20150711T022342Z-22898-32011-1667-1@ubuntu-phablet DTSTAMP:20150711T022342Z DTSTART:20150711T023000Z DTEND:20150711T033000Z SUMMARY:Bugggy CREATED:20150711T022342Z LAST-MODIFIED:20150711T022342Z BEGIN:VALARM X-EVOLUTION-ALARM-UID:20150711T022342Z-22898-32011-1667-2@ubuntu-phablet ACTION:AUDIO TRIGGER;VALUE=DURATION;RELATED=START:-PT15M END:VALARM BEGIN:VALARM X-EVOLUTION-ALARM-UID:20150711T022342Z-22898-32011-1667-3@ubuntu-phablet ACTION:DISPLAY TRIGGER;VALUE=DURATION;RELATED=START:-PT15M END:VALARM END:VEVENT Actual result: BEGIN:VEVENT UID:20150711T022342Z-22898-32011-1667-1@ubuntu-phablet DTSTAMP:20150711T022342Z DTSTART:20150711T023000Z DTEND:20150711T033000Z X-LIC-ERROR;X-LIC-ERRORTYPE=VALUE-PARSE-ERROR:Can't parse as RECUR value ^M in RRULE property. Removing entire property: ERROR: No Value SUMMARY:Bugggy CREATED:20150711T022342Z LAST-MODIFIED:20150711T022342Z BEGIN:VALARM X-EVOLUTION-ALARM-UID:20150711T022342Z-22898-32011-1667-2@ubuntu-phablet ACTION:AUDIO TRIGGER;VALUE=DURATION;RELATED=START:-PT15M END:VALARM BEGIN:VALARM X-EVOLUTION-ALARM-UID:20150711T022342Z-22898-32011-1667-3@ubuntu-phablet ACTION:DISPLAY TRIGGER;VALUE=DURATION;RELATED=START:-PT15M END:VALARM END:VEVENT Also Plz check the test report by running unit tests in qtorganizer5-eds https://bugs.launchpad.net/ubuntu-calendar-app/+bug/1437305/comments/6 ** Changed in: ubuntu-calendar-app Assignee: (unassigned) = Gary.Wang (gary-wzl77) ** Changed in: ubuntu-calendar-app Status: New = In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtorganizer5-eds in Ubuntu. https://bugs.launchpad.net/bugs/1440583 Title: calendar-app is generating invalid RECUR values in RRULE property Status in Ubuntu Calendar App: In Progress Status in qtorganizer5-eds package in Ubuntu: Confirmed Bug description: I created a calendar event for April 24 at 1:35 PM, with a reminder the day before. This is the ~/.local/share/evolution/calendar/system/calendar.ics file that was created, note the X-LIC-ERROR. Tested with calendar-app 0.4.600 on krillin rtm r263. BEGIN:VCALENDAR CALSCALE:GREGORIAN PRODID:-//Ximian//NONSGML Evolution Calendar//EN VERSION:2.0 X-EVOLUTION-DATA-REVISION:2015-04-05T19:06:51.703615Z(2) BEGIN:VEVENT UID:20150405T190651Z-4388-32011-1709-1@ubuntu-phablet DTSTAMP:20150405T190651Z DTSTART:20150424T183500Z DTEND:20150424T193500Z X-LIC-ERROR;X-LIC-ERRORTYPE=VALUE-PARSE-ERROR:Can't parse as RECUR value in RRULE property. Removing entire property: ERROR: No Value SUMMARY:London Sprint Flight DESCRIPTION:Time to pack! CREATED:20150405T190651Z LAST-MODIFIED:20150405T190651Z BEGIN:VALARM X-EVOLUTION-ALARM-UID:20150405T190651Z-4388-32011-1709-2@ubuntu-phablet ACTION:AUDIO TRIGGER;VALUE=DURATION;RELATED=START:-P1D REPEAT:3 DURATION:PT2M END:VALARM BEGIN:VALARM X-EVOLUTION-ALARM-UID:20150405T190651Z-4388-32011-1709-3@ubuntu-phablet ACTION:DISPLAY DESCRIPTION:London Sprint Flight TRIGGER;VALUE=DURATION;RELATED=START:-P1D REPEAT:3 DURATION:PT2M END:VALARM END:VEVENT END:VCALENDAR To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-calendar-app/+bug/1440583/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1440583] Re: calendar-app is generating invalid RECUR values in RRULE property
** Branch linked: lp:~gary-wzl77/ubuntu-calendar-app/fix_1440583 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtorganizer5-eds in Ubuntu. https://bugs.launchpad.net/bugs/1440583 Title: calendar-app is generating invalid RECUR values in RRULE property Status in Ubuntu Calendar App: In Progress Status in qtorganizer5-eds package in Ubuntu: Confirmed Bug description: I created a calendar event for April 24 at 1:35 PM, with a reminder the day before. This is the ~/.local/share/evolution/calendar/system/calendar.ics file that was created, note the X-LIC-ERROR. Tested with calendar-app 0.4.600 on krillin rtm r263. BEGIN:VCALENDAR CALSCALE:GREGORIAN PRODID:-//Ximian//NONSGML Evolution Calendar//EN VERSION:2.0 X-EVOLUTION-DATA-REVISION:2015-04-05T19:06:51.703615Z(2) BEGIN:VEVENT UID:20150405T190651Z-4388-32011-1709-1@ubuntu-phablet DTSTAMP:20150405T190651Z DTSTART:20150424T183500Z DTEND:20150424T193500Z X-LIC-ERROR;X-LIC-ERRORTYPE=VALUE-PARSE-ERROR:Can't parse as RECUR value in RRULE property. Removing entire property: ERROR: No Value SUMMARY:London Sprint Flight DESCRIPTION:Time to pack! CREATED:20150405T190651Z LAST-MODIFIED:20150405T190651Z BEGIN:VALARM X-EVOLUTION-ALARM-UID:20150405T190651Z-4388-32011-1709-2@ubuntu-phablet ACTION:AUDIO TRIGGER;VALUE=DURATION;RELATED=START:-P1D REPEAT:3 DURATION:PT2M END:VALARM BEGIN:VALARM X-EVOLUTION-ALARM-UID:20150405T190651Z-4388-32011-1709-3@ubuntu-phablet ACTION:DISPLAY DESCRIPTION:London Sprint Flight TRIGGER;VALUE=DURATION;RELATED=START:-P1D REPEAT:3 DURATION:PT2M END:VALARM END:VEVENT END:VCALENDAR To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-calendar-app/+bug/1440583/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1443051] Re: Some texts deliver a blank message
[Expired for messaging-app (Ubuntu) because there has been no activity for 60 days.] ** Changed in: messaging-app (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to messaging-app in Ubuntu. https://bugs.launchpad.net/bugs/1443051 Title: Some texts deliver a blank message Status in messaging-app package in Ubuntu: Expired Bug description: When I send a text message to someone sometimes they receive a blank text. This has happened on two occasions, first when the text was rather long, after I split it into two texts it delivered fine. And another time which I sent a few times which became blank on the receiving phone I removed the emoji character and then the text went through fine, the receiving person has an Iphone. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1443051/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1316873] Re: Left mouse button stops working
[Expired for xorg (Ubuntu) because there has been no activity for 60 days.] ** Changed in: xorg (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1316873 Title: Left mouse button stops working Status in xorg package in Ubuntu: Expired Bug description: This problem has plagued me for a few years across different laptops and Ubuntu versions. Current I am experiencing this on a Dell Inspiron 15z running Ubuntu 14.04 LTS. It typically starts after I have used the chat or call feature in gmail, by clicking on the phone icon in the left chat margin. I am a Firefox user and have not tested this with chrome etc. It has not happened if i dont install google-talkplugin so it is quite possible that the plugin is to blame. Symptom === The left mouse button on all attached mice - USB , Trackpad and touch - will not do anything however the right mouse button continues to work. This happens to all applications and also to the desktop. The keyboard continues to function as normal. When this occurs , my solution is to Alt-F4 close all windows and log out of the X session. When I re-login the left mouse button works as normal. This is an irritant and work disruptor as I have to save all browser and desktop applications to safe state before I logout to reset the mouse. I will appreciate any soltion or workaround. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue May 6 21:41:29 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:058f] InstallationDate: Installed on 2014-04-17 (19 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Dell Inc. Inspiron 5523 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=f5004b03-b37f-4733-88a8-51c6f3bd0a4d ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/18/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A05 dmi.board.name: 0GKGJG dmi.board.vendor: Dell Inc. dmi.board.version: A05 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA05:bd05/18/2013:svnDellInc.:pnInspiron5523:pvrNotSpecified:rvnDellInc.:rn0GKGJG:rvrA05:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Inspiron 5523 dmi.product.version: Not Specified dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.11+14.04.20140423-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0-4ubuntu5 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0-4ubuntu5 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Tue May 6 21:20:40 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id5558 vendor CMN xserver.version: 2:1.15.1-0ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1316873/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1466442] Re: X11 breaks event order under async process_key_event when client applications spent time during XNextEvent
Is anything blocking the backports? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ibus in Ubuntu. https://bugs.launchpad.net/bugs/1466442 Title: X11 breaks event order under async process_key_event when client applications spent time during XNextEvent Status in Chromium: Unknown Status in ibus: Unknown Status in trusty-backports: Invalid Status in ibus package in Ubuntu: Fix Released Status in ibus source package in Trusty: New Status in ibus source package in Utopic: New Status in ibus source package in Vivid: New Status in ibus source package in Wily: Fix Released Bug description: This bug comes from: https://code.google.com/p/ibus/issues/detail?id=1697 which is fixed by https://github.com/ibus/ibus/commit/b58351ec2f7c057dcfe0aff883064039702a56d7 It affectes Chrome and Chromium making them receive keystrokes out of order if the machine is running slow. (https://code.google.com/p/chromium/issues/detail?id=410649) The fix applied upstream is to set sync mode to true instead of false by default. The Chromium bug includes quite a bunch of people affected by this problem. It would be nice if this fix could be applied in affected Ubuntu releases (trusty+). To manage notifications about this bug go to: https://bugs.launchpad.net/chromium/+bug/1466442/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1469069] Re: Two-way request for debug mode status should itself use a lenient timeout
** Changed in: unity-scopes-api (Ubuntu) Status: In Progress = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scopes-api in Ubuntu. https://bugs.launchpad.net/bugs/1469069 Title: Two-way request for debug mode status should itself use a lenient timeout Status in unity-scopes-api package in Ubuntu: Fix Released Bug description: Upon determining whether a scope is in debug mode, the scope must be located via the registry. The registry rightfully allows the scope to startup slowly, but the originating locate() call enforces the regular timeout. This is causing premature timeout errors when trying debug a scope on the desktop. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scopes-api/+bug/1469069/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1263540] Re: Apt-get reports NO_PUBKEY gpg error for keys that are present in trusted.gpg.
Nothing works for me.. /etc/apt/trusted.gpg.d/ is already empty on a fresh 14.04 LTS.. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1263540 Title: Apt-get reports NO_PUBKEY gpg error for keys that are present in trusted.gpg. Status in APT: Fix Released Status in apt package in Ubuntu: Fix Released Bug description: Ubuntu 13.10 apt 0.9.9.1~ubuntu3 'apt-get update' has started showing several warnings like the following, even though the keys are present: W: GPG error: http://us.archive.ubuntu.com saucy Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5 NO_PUBKEY 3B4FE6ACC0B21F32 'apt-key list' shows the keys in question in its output... pub 1024D/437D05B5 2004-09-12 uid Ubuntu Archive Automatic Signing Key ftpmas...@ubuntu.com sub 2048g/79164387 2004-09-12 pub 4096R/C0B21F32 2012-05-11 uid Ubuntu Archive Automatic Signing Key (2012) ftpmas...@ubuntu.com ...and its output begins with the following: gpg: keyblock resource `/etc/apt/trusted.gpg.d//webupd8team-y-ppa- manager.gpg': resource limit I see the same gpg message when I manually update/remove/add the keys in question. E.g.: $ sudo apt-key update gpg: keyblock resource `/etc/apt/trusted.gpg.d//webupd8team-java.gpg': resource limit gpg: keyblock resource `/etc/apt/trusted.gpg.d//webupd8team-y-ppa-manager.gpg': resource limit gpg: key 437D05B5: Ubuntu Archive Automatic Signing Key ftpmas...@ubuntu.com not changed gpg: key FBB75451: Ubuntu CD Image Automatic Signing Key cdim...@ubuntu.com not changed gpg: key C0B21F32: Ubuntu Archive Automatic Signing Key (2012) ftpmas...@ubuntu.com not changed gpg: key EFE21092: Ubuntu CD Image Automatic Signing Key (2012) cdim...@ubuntu.com not changed gpg: Total number processed: 4 gpg: unchanged: 4 I asked about the resource limit message on the gnupg-users mailing list... http://www.mail-archive.com/gnupg-users@gnupg.org/msg23300.html Based on Werner Koch's (the dev) answer... http://www.mail-archive.com/gnupg-users@gnupg.org/msg23302.html ...the secure apt related programs might be making gpg use more than the maximum number of keyrings that it can handle. To manage notifications about this bug go to: https://bugs.launchpad.net/apt/+bug/1263540/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp