[Touch-packages] [Bug 1583666] Re: laggy PC

[Sami Senng]

I have similar configuration, HP notebook eliteBook 850 g3, VGA
compatible controller: Intel Corporation Sky Lake Integrated Graphics
(rev 07). Ubuntu in dual monitor system freezes after awakening from
suspending to ram.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1583666

Title:
  laggy PC

Status in xorg package in Ubuntu:
  Confirmed

Bug description:
  I have an HP envy 13 (6th gen core i5) that runs smoothly on windows.
  I really try using ubuntu as my main OS but lagginess doesn't help
  that.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  .tmp.unity_support_test.0:
   
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Thu May 19 10:34:46 2016
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  ExtraDebuggingInterest: No
  GraphicsCard:
   Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07) (prog-if 
00 [VGA controller])
 Subsystem: Hewlett-Packard Company Skylake Integrated Graphics [103c:80df]
  InstallationDate: Installed on 2016-05-18 (1 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  MachineType: HP HP ENVY Notebook
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed 
root=UUID=54673ec1-b654-4c3e-b021-29dcd078a702 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/18/2016
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.34
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 80DF
  dmi.board.vendor: HP
  dmi.board.version: 87.59
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: HP
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.34:bd02/18/2016:svnHP:pnHPENVYNotebook:pvrType1ProductConfigId:rvnHP:rn80DF:rvr87.59:cvnHP:ct10:cvrChassisVersion:
  dmi.product.name: HP ENVY Notebook
  dmi.product.version: Type1ProductConfigId
  dmi.sys.vendor: HP
  version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.67-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2
  version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.12-1build2
  xserver.bootTime: Thu May 19 06:48:29 2016
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   16730 
   vendor SDC
  xserver.version: 2:1.18.3-1ubuntu2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1583666/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586883] Re: Can't right-edge switch apps when the OSK on-screen-keyboard is visible

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: unity8 (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1586883

Title:
  Can't right-edge switch apps when the OSK on-screen-keyboard is
  visible

Status in Canonical System Image:
  New
Status in unity8 package in Ubuntu:
  Confirmed

Bug description:
  Can't right-edge switch apps when the OSK on-screen-keyboard is
  visible.

  Kind of... You can switch apps if you use the top-right edge and avoid
  the OSK. But you can't switch apps using the bottom half of the right
  edge when the OSK is there. The OSK is stealing input events from the
  edge gesture.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1586883/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1583666] Re: laggy PC

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: xorg (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1583666

Title:
  laggy PC

Status in xorg package in Ubuntu:
  Confirmed

Bug description:
  I have an HP envy 13 (6th gen core i5) that runs smoothly on windows.
  I really try using ubuntu as my main OS but lagginess doesn't help
  that.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  .tmp.unity_support_test.0:
   
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Thu May 19 10:34:46 2016
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  ExtraDebuggingInterest: No
  GraphicsCard:
   Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07) (prog-if 
00 [VGA controller])
 Subsystem: Hewlett-Packard Company Skylake Integrated Graphics [103c:80df]
  InstallationDate: Installed on 2016-05-18 (1 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  MachineType: HP HP ENVY Notebook
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed 
root=UUID=54673ec1-b654-4c3e-b021-29dcd078a702 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/18/2016
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.34
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 80DF
  dmi.board.vendor: HP
  dmi.board.version: 87.59
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: HP
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.34:bd02/18/2016:svnHP:pnHPENVYNotebook:pvrType1ProductConfigId:rvnHP:rn80DF:rvr87.59:cvnHP:ct10:cvrChassisVersion:
  dmi.product.name: HP ENVY Notebook
  dmi.product.version: Type1ProductConfigId
  dmi.sys.vendor: HP
  version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.67-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2
  version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.12-1build2
  xserver.bootTime: Thu May 19 06:48:29 2016
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   16730 
   vendor SDC
  xserver.version: 2:1.18.3-1ubuntu2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1583666/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 739495] Re: include in .ssh/config

[Simon Law]

From: https://bugzilla.mindrot.org/show_bug.cgi?id=1585#c24

Damien Miller 2016-04-15 13:01:08 EST
Slightly modified patch applied, this will be in openssh-7.3

commit dc7990be865450574c7940c9880567f5d2555b37
Author: d...@openbsd.org 
Date:   Fri Apr 15 00:30:19 2016 +

upstream commit

Include directive for ssh_config(5); feedback & ok markus@

Upstream-ID: ae3b76e2e343322b9f74acde6f1e1c5f027d5fff
commit 35f22dad263cce5c61d933ae439998cb965b8748
Author: d...@openbsd.org 
Date:   Fri Apr 15 00:31:10 2016 +

upstream commit

regression test for ssh_config Include directive

Upstream-Regress-ID: 46a38c8101f635461c506d1aac2d96af80f97f1e

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to openssh in Ubuntu.
https://bugs.launchpad.net/bugs/739495

Title:
  include in .ssh/config

Status in portable OpenSSH:
  Confirmed
Status in openssh package in Ubuntu:
  Confirmed

Bug description:
  Could you implement sub-config including feature, please?
  It's very useful to split a user config file into many pieces if you have a 
many hosts.

To manage notifications about this bug go to:
https://bugs.launchpad.net/openssh/+bug/739495/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Touch-packages] [Bug 1582213] Re: Bluetooth headset doesn't play any sound (regression)

[Luke Yelavich]

I know there has been some discussion upstream about bluez 5 and
different profiles, but I haven't followed it closely so not sure if
related.

Mary, could you please try and get a log from PulseAudio, as outlined at
https://wiki.ubuntu.com/PulseAudio/Log.

Thanks.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1582213

Title:
  Bluetooth headset doesn't play any sound (regression)

Status in pulseaudio package in Ubuntu:
  New

Bug description:
  I have a Sennheiser MM 450-X headset.

  In 15.10, connection & playback was straightforward.

  In 16.04, the headset connects, and shows up as default playback
  device on `pavucontrol`, but there is no sound.

  A functional workaround is to, after having connected it, to go the
  `Configuration` tab, and in the `Profile` dropdown, to choose `...
  HSP/HFP`, which will make them play as expected (but in low quality),
  then switch to `... A2DP Sink` (they will play in high quality).

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: pulseaudio-module-bluetooth 1:8.0-0ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-22.39-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  NonfreeKernelModules: zfs zunicode zcommon znvpair zavl nvidia_uvm nvidia_drm 
nvidia_modeset nvidia
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  saverio2936 F pulseaudio
   /dev/snd/controlC2:  saverio2936 F pulseaudio
   /dev/snd/controlC0:  saverio2936 F pulseaudio
  Date: Mon May 16 14:18:58 2016
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2016-03-11 (66 days ago)
  InstallationMedia: Xubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20160224)
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  SourcePackage: pulseaudio
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/22/2015
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: F5
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: F2A88XN-WIFI
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrF5:bd04/22/2015:svnGigabyteTechnologyCo.,Ltd.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnF2A88XN-WIFI:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To be filled by O.E.M.
  dmi.product.version: To be filled by O.E.M.
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1582213/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Touch-packages] [Bug 1582414] Re: No HDMI audio on Lenovo pro dock with T440s

[Luke Yelavich]

The best way to determine whether this is kernel related is to test a
recent daily trusty live image that has a newer kernel... I think newer
images have the xenial kernel on them, so this would be a good way to
determine where the problem is. A fair bit changed in pulse between
trusty and xenial, and same with the kernel.

Martin, please download the latest daily image from
http://cdimage.ubuntu.com/trusty/daily-live, put it onto a bootable
device or an optical disk, and boot from it. Try and use the dock's
DP/HDMI connection and report back.

Thanks.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1582414

Title:
  No HDMI audio on Lenovo pro dock with T440s

Status in pulseaudio package in Ubuntu:
  New

Bug description:
  pavucontrol shows Display Port/HDMI output as "(unplugged)" and cannot
  be chosen as a sink.  This is only a problem with the dock; audio
  works when plugging HDMI through the laptop's DP input.

  The audio did work with the dock in Ubuntu 14.04.  Did something in
  jack detection change?  Anyway, my work around is to plug a 3.4mm
  audio cable into the dock and power the speakers that way, but it
  would be nice to use the HDMI audio again.

  I would love to have a work around.  I've attached the output from
  alsa-info.sh, just in case this is useful.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: pulseaudio 1:8.0-0ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC3:  weinberg   2221 F pulseaudio
   /dev/snd/controlC2:  weinberg   2221 F pulseaudio
   /dev/snd/controlC0:  weinberg   2221 F pulseaudio
   /dev/snd/controlC1:  weinberg   2221 F pulseaudio
  CurrentDesktop: Unity
  Date: Mon May 16 17:18:06 2016
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2016-05-06 (10 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  ProcEnviron:
   LANGUAGE=en_US
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: pulseaudio
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 03/19/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: GJET74WW (2.24 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20ARA0S100
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Defined
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrGJET74WW(2.24):bd03/19/2014:svnLENOVO:pn20ARA0S100:pvrThinkPadT440s:rvnLENOVO:rn20ARA0S100:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 20ARA0S100
  dmi.product.version: ThinkPad T440s
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1582414/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586896] [NEW] Dots around the infographic circle are irregular and different shapes

[Daniel van Vugt]

Public bug reported:

Dots around the infographic circle are irregular and different shapes.

This is easily visible at low DPI -- on a BQ Acquaris E4.5 or on my
desktop 24" display.

** Affects: canonical-devices-system-image
 Importance: Undecided
 Status: New

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

** Also affects: unity8 (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1586896

Title:
  Dots around the infographic circle are irregular and different shapes

Status in Canonical System Image:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  Dots around the infographic circle are irregular and different shapes.

  This is easily visible at low DPI -- on a BQ Acquaris E4.5 or on my
  desktop 24" display.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1586896/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1533391] Re: [greeter] Infographic circles have wrong radius when double tapping

[Daniel van Vugt]

** Also affects: canonical-devices-system-image
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1533391

Title:
  [greeter] Infographic circles have wrong radius when double tapping

Status in Canonical System Image:
  New
Status in unity8 package in Ubuntu:
  Confirmed

Bug description:
  Device: BQ E4.5, OTA8.5

  When waking up the phone from stand-by I get the circle with certain label 
with the count of my activities and related circles all around (situation A). 
If I double tap the circle till I return to the same activity i get the same 
label (this is working as expected), but some circles have different radius  
(situation B).
  If I put the phone to stand-by again and wake up the circles are unchanged 
(i.e. still different radius, same as in B), but if I unlock the phone, put it 
to stand-by and then wake up, I get the same circle radius as in A.

  For more explanation see the two screenshots.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1533391/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1561682] Re: in live-iso session, external disk mounts fine in read-mode, but unable to write to it

[Launchpad Bug Tracker]

[Expired for util-linux (Ubuntu) because there has been no activity for
60 days.]

** Changed in: util-linux (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to util-linux in Ubuntu.
https://bugs.launchpad.net/bugs/1561682

Title:
  in live-iso session, external disk mounts fine in read-mode, but
  unable to write to it

Status in util-linux package in Ubuntu:
  Expired

Bug description:
  When running Ubuntu Studio from a live-iso session, i can mount an
  external drive and read from it. But i can't write to it. File-manager
  shows the disk, but the save-dialogue in applications don't show it..

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: mount 2.27.1-6ubuntu1
  ProcVersionSignature: Ubuntu 4.4.0-15.31-lowlatency 4.4.6
  Uname: Linux 4.4.0-15-lowlatency x86_64
  ApportVersion: 2.20-0ubuntu3
  Architecture: amd64
  CasperVersion: 1.368
  CurrentDesktop: XFCE
  Date: Thu Mar 24 18:31:38 2016
  LiveMediaBuild: Ubuntu-Studio 16.04 LTS "Xenial Xerus" - Beta amd64 (20160323)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=sv_SE.UTF-8
   SHELL=/bin/bash
  SourcePackage: util-linux
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1561682/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586887] [NEW] Can't install libudev-dev on Ubuntu 16.04

[Marvin Arcilla]

Public bug reported:

http://askubuntu.com/questions/779300/cant-install-libudev-dev-on-
ubuntu-16-04

I cant seem to find a solution for installing libudev-dev package.
It outputs this error
> The following packages have unmet dependencies:
 libudev-dev : Depends: libudev1 (= 229-4ubuntu4) but 229-4ubuntu5 is to be 
installed

So i tried
sudo apt-get install libudev1

> libudev1 is already the newest version (229-4ubuntu5).

You may have notice that in my machine a latest version of it is installed. 
which is 229-4ubuntu5
I also tried what was suggested here.


`sudo apt-cache madison libudev-dev`

`sudo apt-cache madison libudev1`

`sudo apt-get install libudev-dev`

But I still get the same error.

P.S.
Needed output is here
Description:Ubuntu 16.04 LTS
Release:16.04

libudev-dev:
  Installed: (none)
  Candidate: 229-4ubuntu4
  Version table:
 229-4ubuntu4 500
500 http://ph.archive.ubuntu.com/ubuntu xenial/main amd64 Packages
libudev1:
  Installed: 229-4ubuntu5
  Candidate: 229-4ubuntu5
  Version table:
 *** 229-4ubuntu5 100
100 /var/lib/dpkg/status
 229-4ubuntu4 500
500 http://ph.archive.ubuntu.com/ubuntu xenial/main amd64 Packages

** Affects: systemd (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1586887

Title:
  Can't install libudev-dev on Ubuntu 16.04

Status in systemd package in Ubuntu:
  New

Bug description:
  http://askubuntu.com/questions/779300/cant-install-libudev-dev-on-
  ubuntu-16-04

  I cant seem to find a solution for installing libudev-dev package.
  It outputs this error
  > The following packages have unmet dependencies:
   libudev-dev : Depends: libudev1 (= 229-4ubuntu4) but 229-4ubuntu5 is to be 
installed

  So i tried
  sudo apt-get install libudev1

  > libudev1 is already the newest version (229-4ubuntu5).

  You may have notice that in my machine a latest version of it is installed. 
which is 229-4ubuntu5
  I also tried what was suggested here.
  


  `sudo apt-cache madison libudev-dev`

  `sudo apt-cache madison libudev1`

  `sudo apt-get install libudev-dev`

  But I still get the same error.

  P.S.
  Needed output is here
  Description:  Ubuntu 16.04 LTS
  Release:  16.04

  libudev-dev:
Installed: (none)
Candidate: 229-4ubuntu4
Version table:
   229-4ubuntu4 500
  500 http://ph.archive.ubuntu.com/ubuntu xenial/main amd64 Packages
  libudev1:
Installed: 229-4ubuntu5
Candidate: 229-4ubuntu5
Version table:
   *** 229-4ubuntu5 100
  100 /var/lib/dpkg/status
   229-4ubuntu4 500
  500 http://ph.archive.ubuntu.com/ubuntu xenial/main amd64 Packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1586887/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1523823] Re: Dash touch scrolling is slower (more laggy) than web browser touch scrolling

[Daniel van Vugt]

Hmm, maybe this is just a natural consequence of bug 1494795

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1523823

Title:
  Dash touch scrolling is slower (more laggy) than web browser touch
  scrolling

Status in Canonical System Image:
  Confirmed
Status in unity8 package in Ubuntu:
  New

Bug description:
  Dash touch scrolling is slower than web browser touch scrolling. But
  obviously it should not be.

  This has been an issue for as long as I remember. Just upgraded mako
  to xenial and it's still there.

  Am I imagining things? Is this simply explained by the web browser
  using a different toolkit? Could it just be a side-effect of bug
  1494795?

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1523823/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1377427] Re: BQ: Thin column of pixels visible on the left (wrapped from the right?)

[Daniel van Vugt]

We have another open bug about the Unity8 screen not fitting the
physical screen: bug 1583469

I think they might be related.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1377427

Title:
  BQ: Thin column of pixels visible on the left (wrapped from the
  right?)

Status in Canonical System Image:
  Confirmed
Status in Mir:
  Confirmed
Status in unity8 package in Ubuntu:
  Confirmed

Bug description:
  with image 81 my krillin shows a white 1px line on the left edge of
  the screen, specifically visible when switching apps or sliding the
  launcher in.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1377427/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1583469] Re: Strange behavior after using desktop mode

[Daniel van Vugt]

We have another open bug about the Unity8 screen not fitting the
physical screen: bug 1377427

I think they might be related.

** Tags added: android

** Summary changed:

- Strange behavior after using desktop mode
+ Screen jitters/flickers wildly - Unity8 screen does not fit the physical 
screen

** Changed in: mir
   Importance: Undecided => High

** Changed in: mir (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mir in Ubuntu.
https://bugs.launchpad.net/bugs/1583469

Title:
  Screen jitters/flickers wildly - Unity8 screen does not fit the
  physical screen

Status in Canonical System Image:
  Confirmed
Status in Mir:
  New
Status in mir package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  Incomplete

Bug description:
  I set the BQ M10 device in Desktop mode yesterday evening.

  After that i used the tablet mode. Then i went to sleep. As i turned
  on my device i got the flickering in the video.

  I restarted the device. The flickering was gone.

  The device is on the image version: r108

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1583469/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586883] [NEW] Can't right-edge switch apps when the OSK on-screen-keyboard is visible

[Daniel van Vugt]

Public bug reported:

Can't right-edge switch apps when the OSK on-screen-keyboard is visible.

Kind of... You can switch apps if you use the top-right edge and avoid
the OSK. But you can't switch apps using the bottom half of the right
edge when the OSK is there. The OSK is stealing input events from the
edge gesture.

** Affects: canonical-devices-system-image
 Importance: Undecided
 Status: New

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

** Also affects: unity8 (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1586883

Title:
  Can't right-edge switch apps when the OSK on-screen-keyboard is
  visible

Status in Canonical System Image:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  Can't right-edge switch apps when the OSK on-screen-keyboard is
  visible.

  Kind of... You can switch apps if you use the top-right edge and avoid
  the OSK. But you can't switch apps using the bottom half of the right
  edge when the OSK is there. The OSK is stealing input events from the
  edge gesture.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1586883/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1480654] Re: [regression] Input focus delay after switching app back into focus since OTA5

[Daniel van Vugt]

Last time I tested this bug (and the Mir fix) the only remaining problem
for me was that one second tick of the Unity8 app switch animation
completing and then realigning the surface to fit the screen. Even that
delay doesn't happen reliably on demand for me...

I have just retested OTA-10.1 on krillin and can reproduce a second or
so of delay, but only after selecting an app like Calculator from the
full spread.

Annoyingly the OSK makes things worse in a different way -- it's so slow
to show and hide that it seems to be masking this bug. So you need to
test apps that don't need the OSK but do expect touches.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mir in Ubuntu.
https://bugs.launchpad.net/bugs/1480654

Title:
  [regression] Input focus delay after switching app back into focus
  since OTA5

Status in Canonical System Image:
  New
Status in Mir:
  Fix Released
Status in mir package in Ubuntu:
  Fix Released
Status in qtmir package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  i am not sure if it started with OTA4 or OTA5 but since one of the
  recent OTA upgrades my arale takes between half a second and one
  second before an app takes input again when one switches it from
  background back into focus. i'm talking about apps that were only
  sigstopped, not OOM killed here (i.e. no restart involved, just
  sigcont).

  this used to be instant before and gives a weird feeling of
  sluggishness.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1480654/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1377427] Re: BQ: Thin column of pixels visible on the left (wrapped from the right?)

[Daniel van Vugt]

Confirmed again by duplicate bug 1586646.

** Summary changed:

- white 1 pixel line on left edge of the screen since RTM image 81
+ BQ: Thin column of pixels visible on the left (wrapped from the right?)

** Also affects: mir
   Importance: Undecided
   Status: New

** Also affects: unity8 (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: mir
   Importance: Undecided => High

** Changed in: unity8 (Ubuntu)
   Importance: Undecided => High

** Changed in: mir
   Status: New => Confirmed

** Changed in: unity8 (Ubuntu)
   Status: New => Confirmed

** Tags added: android

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1377427

Title:
  BQ: Thin column of pixels visible on the left (wrapped from the
  right?)

Status in Canonical System Image:
  Confirmed
Status in Mir:
  Confirmed
Status in unity8 package in Ubuntu:
  Confirmed

Bug description:
  with image 81 my krillin shows a white 1px line on the left edge of
  the screen, specifically visible when switching apps or sliding the
  launcher in.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1377427/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586646] Re: Pixel column overlaps from far right to the far left of the screen

[Daniel van Vugt]

*** This bug is a duplicate of bug 1377427 ***
https://bugs.launchpad.net/bugs/1377427

Thank you for taking the time to report this bug and helping to make
Ubuntu better. This particular bug has already been reported and is a
duplicate of bug 1377427, so it is being marked as such. Please look at
the other bug report to see if there is any missing information that you
can provide, or to see if there is a workaround for the bug.
Additionally, any further discussion regarding the bug should occur in
the other report. Feel free to continue to report any other bugs you may
find.


** This bug has been marked a duplicate of bug 1377427
   BQ: Thin column of pixels visible on the left (wrapped from the right?)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1586646

Title:
  Pixel column overlaps from far right to the far left of the screen

Status in Mir:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  BQ Aquaris E5 with official Ubuntu 15.04 (OTA-10.1)

  I've tested around 20 sequential reboots, and ardound 2-3 times form
  10 first reboots I see far right column of pixels (not sure how much)
  moved to the left of the screen.

  I've attached two screenshots that _are not actual screenshots but
  mere simulations_, as this effect is not seen in screenshot made, only
  on screen itself.

  And these artefacts are not static, I can see it change like in app
  swich mode, when white column hides/appears depending if app window is
  "touching" far right of the screen.

To manage notifications about this bug go to:
https://bugs.launchpad.net/mir/+bug/1586646/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586646] Re: Pixel column overlaps from far right to the far left of the screen

[Daniel van Vugt]

*** This bug is a duplicate of bug 1377427 ***
https://bugs.launchpad.net/bugs/1377427

** Also affects: unity8 (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1586646

Title:
  Pixel column overlaps from far right to the far left of the screen

Status in Mir:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  BQ Aquaris E5 with official Ubuntu 15.04 (OTA-10.1)

  I've tested around 20 sequential reboots, and ardound 2-3 times form
  10 first reboots I see far right column of pixels (not sure how much)
  moved to the left of the screen.

  I've attached two screenshots that _are not actual screenshots but
  mere simulations_, as this effect is not seen in screenshot made, only
  on screen itself.

  And these artefacts are not static, I can see it change like in app
  swich mode, when white column hides/appears depending if app window is
  "touching" far right of the screen.

To manage notifications about this bug go to:
https://bugs.launchpad.net/mir/+bug/1586646/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1254269] Re: Imposible actualizar software

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: eglibc (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to eglibc in Ubuntu.
https://bugs.launchpad.net/bugs/1254269

Title:
  Imposible actualizar software

Status in eglibc package in Ubuntu:
  Confirmed

Bug description:
  E: No se pudo abrir el fichero de bloqueo «/var/lib/dpkg/lock» - open
  (13: Permiso denegado)

  Se encontraron errores al procesar:
   /var/cache/apt/archives/libc6_2.15-0ubuntu10.5_amd64.deb
   /var/cache/apt/archives/libc6_2.15-0ubuntu10.5_i386.deb
  E: Sub-process /usr/bin/dpkg returned an error code (1)

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: libc6 2.15-0ubuntu10.4
  ProcVersionSignature: Ubuntu 3.2.0-55.85-generic 3.2.51
  Uname: Linux 3.2.0-55-generic x86_64
  ApportVersion: 2.0.1-0ubuntu17.5
  Architecture: amd64
  Date: Sat Nov 23 15:46:55 2013
  ErrorMessage: ErrorMessage: el subproceso script pre-installation nuevo 
devolvió el código de salida de error 1
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  MarkForUpload: True
  SourcePackage: eglibc
  Title: package libc6 2.15-0ubuntu10.4 failed to install/upgrade: 
ErrorMessage: el subproceso script pre-installation nuevo devolvió el código de 
salida de error 1
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/1254269/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586857] [NEW] Drag and drop not working from Qt to skype

[Vitaliy Gorbunov]

Public bug reported:

See corresponding bug in qt tracker https://bugreports.qt.io/browse/QTBUG-53238
Patch exists, but not yet merged.

** Affects: qtbase-opensource-src (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtbase-opensource-src in
Ubuntu.
https://bugs.launchpad.net/bugs/1586857

Title:
  Drag and drop not working from Qt to skype

Status in qtbase-opensource-src package in Ubuntu:
  New

Bug description:
  See corresponding bug in qt tracker 
https://bugreports.qt.io/browse/QTBUG-53238
  Patch exists, but not yet merged.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtbase-opensource-src/+bug/1586857/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1577313] Re: Drag and drop not working from Qt to some applications

[Vitaliy Gorbunov]

Tested with libqt5gui5/xenial-proposed as well. Works perfectly.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtbase-opensource-src in
Ubuntu.
https://bugs.launchpad.net/bugs/1577313

Title:
  Drag and drop not working from Qt to some applications

Status in qtbase-opensource-src package in Ubuntu:
  Fix Released
Status in qtbase-opensource-src source package in Xenial:
  Fix Committed

Bug description:
  [Impact]

  Drag and drop broken from Qt application to some applications like
  Chromium and Emacs.

  [Test Case]

  See above.

  [Regression Potential]

  Drag and drop in general should be tested. The fixes have been merged
  to upstream Qt LTS release.

  --

  https://codereview.qt-project.org/#/c/150641/
  https://codereview.qt-project.org/#/c/157683/

  As requested on Kubuntu mailing list https://lists.ubuntu.com/archives
  /kubuntu-devel/2016-May/010420.html

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtbase-opensource-src/+bug/1577313/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1273261] Re: Cryptsetup error during boot: /scripts/local-top/cryptroot: line 1: can't open /dev/mapper/ubuntu--vg-root: no such file

[Darek]

It happened for me. My original report of the issue is here
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1581761. I'm
updated and still my ubuntu won't boot.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1273261

Title:
  Cryptsetup error during boot: /scripts/local-top/cryptroot: line 1:
  can't open /dev/mapper/ubuntu--vg-root: no such file

Status in cryptsetup package in Ubuntu:
  Fix Released
Status in initramfs-tools package in Ubuntu:
  Fix Released

Bug description:
  While booting cryptsetup outputs following error: /scripts/local-
  top/cryptroot: line 1: can't open /dev/mapper/ubuntu--vg-root: no such
  file, seems to be not related to this particular installation as saw
  the same output on other machines, also seems to be nothing major as
  everything boots fine, so just reporting to let you know it's there.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: cryptsetup 2:1.4.3-4ubuntu4
  ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10
  Uname: Linux 3.11.0-15-generic x86_64
  ApportVersion: 2.12.5-0ubuntu2.2
  Architecture: amd64
  Date: Mon Jan 27 15:58:16 2014
  InstallationDate: Installed on 2014-01-18 (8 days ago)
  InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 
(20131016.1)
  MarkForUpload: True
  SourcePackage: cryptsetup
  UpgradeStatus: No upgrade log present (probably fresh install)
  crypttab: sda3_crypt UUID=68851a49-83a4-41eb-84c0-27d15280bbc1 none luks

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1273261/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586848] [NEW] On Ubuntu touch it is not possible to change timezone while filesystem is mounted readonly (default)

[AlainKnaff]

Public bug reported:

On Ubuntu touch, by default, the filesystem is mounted as read only by
default.

However, in this state the timezone cannot be changed neither through
the GUI, nor through dpkg-reconfigure tzdata

Through GUI, I tried the following:
1. Swipe from top, through Time & Date
2. Click "Time & Date settings"
3. Under timezone, click the currently set timezone (in my case 
Europe/Luxembourg UTC+2)
4. Under current location, enter Helsinki
5. Click on "Helsinki, Uusimaa, Finland"
6. "Helsinki, Uusimaa, Finland" gets blue writing on grey background, but 
nothing else happens.

Clicking "back" at top of the screen allows to exit this dialog, but
timezone is not changed.

In contrast, if filesystem is mounted read-write (not the default
state), the button disappears on click, I get back to the previous page,
and timezone is indeed changed.

When trying to change the timezone through the command line (dpkg-
reconfigure tzdata), I get the following error message:

cp: cannot create regular file '/etc/localtime.dpkg-new': Read-only file
system

Current default time zone: 'Europe/Helsinki'
Local time is now:  Mon May 30 00:13:08 CEST 2016.
Universal Time is now:  Sun May 29 22:13:08 UTC 2016.

debconf: DbDriver "config": could not write /var/cache/debconf/config
.dat-new: Read-only file system


root@alains-pocket-penguin:~# lsb_release -rd
Description:Ubuntu 15.04
Release:15.04
root@alains-pocket-penguin:~# apt-cache policy tzdata
tzdata:
  Installed: 2015g-0ubuntu0.15.04
  Candidate: 2015g-0ubuntu0.15.04
  Version table:
 *** 2015g-0ubuntu0.15.04 0
500 http://ports.ubuntu.com/ubuntu-ports/ vivid-updates/main armhf 
Packages
500 http://ports.ubuntu.com/ubuntu-ports/ vivid-security/main armhf 
Packages
100 /var/lib/dpkg/status
 2015c-1 0
500 http://ports.ubuntu.com/ubuntu-ports/ vivid/main armhf Packages

What I expected to happen:
- Timezone should change

What happened instead:
- In GUI, button for new timezone is highlighted (blue writing on grey 
background), but dialog does not go away. Leaving it via "back" at top left of 
screen leaves timezone unchanged
- In command line, I get the following error:

cp: cannot create regular file '/etc/localtime.dpkg-new': Read-only file
system

Current default time zone: 'Europe/Helsinki'
Local time is now:  Mon May 30 00:13:08 CEST 2016.
Universal Time is now:  Sun May 29 22:13:08 UTC 2016.

debconf: DbDriver "config": could not write /var/cache/debconf/config
.dat-new: Read-only file system


Suggested fix: 
/var/cache/debconf should be on a filesystem which is always writeable
/etc/localtime should be a symlink to writable/localtime (just like is the case 
for /etc/timezone)

** Affects: tzdata (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to tzdata in Ubuntu.
https://bugs.launchpad.net/bugs/1586848

Title:
  On Ubuntu touch it is not possible to change timezone while filesystem
  is mounted readonly (default)

Status in tzdata package in Ubuntu:
  New

Bug description:
  On Ubuntu touch, by default, the filesystem is mounted as read only by
  default.

  However, in this state the timezone cannot be changed neither through
  the GUI, nor through dpkg-reconfigure tzdata

  Through GUI, I tried the following:
  1. Swipe from top, through Time & Date
  2. Click "Time & Date settings"
  3. Under timezone, click the currently set timezone (in my case 
Europe/Luxembourg UTC+2)
  4. Under current location, enter Helsinki
  5. Click on "Helsinki, Uusimaa, Finland"
  6. "Helsinki, Uusimaa, Finland" gets blue writing on grey background, but 
nothing else happens.

  Clicking "back" at top of the screen allows to exit this dialog, but
  timezone is not changed.

  In contrast, if filesystem is mounted read-write (not the default
  state), the button disappears on click, I get back to the previous
  page, and timezone is indeed changed.

  When trying to change the timezone through the command line (dpkg-
  reconfigure tzdata), I get the following error message:

  cp: cannot create regular file '/etc/localtime.dpkg-new': Read-only
  file system

  Current default time zone: 'Europe/Helsinki'
  Local time is now:  Mon May 30 00:13:08 CEST 2016.
  Universal Time is now:  Sun May 29 22:13:08 UTC 2016.

  debconf: DbDriver "config": could not write /var/cache/debconf/config
  .dat-new: Read-only file system

  
  root@alains-pocket-penguin:~# lsb_release -rd
  Description:Ubuntu 15.04
  Release:15.04
  root@alains-pocket-penguin:~# apt-cache policy tzdata
  tzdata:
Installed: 2015g-0ubuntu0.15.04
Candidate: 2015g-0ubuntu0.15.04
Version table:
   *** 2015g-0ubuntu0.15.04 0
  500 http://ports.ubuntu.com/ubuntu-ports/ vivid-updates/main armhf 
Packages
  500 http://ports.ubuntu.com/ubuntu-ports/ vivid-security/main armhf 
Packages
  100 

[Touch-packages] [Bug 1523100] Re: Alsa not detecting internal microphone [ALC255] (Realtek)

[Chris Allen]

Same issue here. I have an Asus X540LA laptop with the same chipset and
the headset mic doesn't work.

[1.576056] snd_hda_intel :00:03.0: bound :00:02.0 (ops 
i915_audio_component_bind_ops [i915])
[1.612215] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC255: 
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[1.612220] snd_hda_codec_realtek hdaudioC1D0:speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[1.612224] snd_hda_codec_realtek hdaudioC1D0:hp_outs=1 
(0x21/0x0/0x0/0x0/0x0)
[1.612226] snd_hda_codec_realtek hdaudioC1D0:mono: mono_out=0x0
[1.612228] snd_hda_codec_realtek hdaudioC1D0:inputs:
[1.612231] snd_hda_codec_realtek hdaudioC1D0:  Mic=0x1b

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1523100

Title:
  Alsa not detecting internal microphone [ALC255] (Realtek)

Status in alsa-driver package in Ubuntu:
  Confirmed

Bug description:
  I've just installed Ubuntu 16.04 alongside Windows 10 on a 64bit Acer
  Aspire VN7-792G and noticed, that the internal microphone doesn't
  work. The computer has been released a couple of months ago and it's
  Intel Skylake -based with a Sunrise Point -based motherboard.

  INFO: The problem exists in Ubuntu 15.10 too, only microphone jack
  detected. Currently using Ubuntu 16.04 for proper hardware support.

  Alsa reports the audio device to be:

  Card: HDA Intel PCH
  Chip: Intel Skylake HDMI

  The speakers are working fine, but both alsamixer and pavucontrol
  (Pulseaudio Volume Control) raport the unplugged external microphone
  connector as the only sound input.

  I have tried many of the alsa model configurations (options snd-hda-
  intel model=something) without success, alsa finds only the microphone
  jack, which works fine when I plug an external microphone in it.

  Here's some info:

  lspci | grep -I audio:

  00:1f.3 Multimedia audio controller: Intel Corporation Sunrise Point-H
  HD Audio (rev 31)

  cat /proc/asound/cards:

  0 [PCH]: HDA-Intel - HDA Intel PCH
  HDA Intel PCH at 0x8432 irq 128

  And a clip from dmesg | grep snd:

  [3.019164] snd_hda_intel :00:1f.3: bound :00:02.0 (ops 
i915_audio_component_bind_ops [i915])
  [3.047505] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: 
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
  [3.047508] snd_hda_codec_realtek hdaudioC0D0:speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
  [3.047510] snd_hda_codec_realtek hdaudioC0D0:hp_outs=1 
(0x21/0x0/0x0/0x0/0x0)
  [3.047511] snd_hda_codec_realtek hdaudioC0D0:mono: mono_out=0x0
  [3.047512] snd_hda_codec_realtek hdaudioC0D0:dig-out=0x1e/0x0
  [3.047512] snd_hda_codec_realtek hdaudioC0D0:inputs:
  [3.047514] snd_hda_codec_realtek hdaudioC0D0:  Mic=0x1a

  One problem is that I can't find any model options (options snd-hda-
  intel model=something) or other parameters for the card's model
  (ALC255), I suppose this issue is relatively new.

  /Dennis
  --- 
  ApportVersion: 2.19.2-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  dennis 1180 F pulseaudio
  CurrentDesktop: GNOME
  DistroRelease: Ubuntu 16.04
  InstallationDate: Installed on 2015-11-11 (23 days ago)
  InstallationMedia: Ubuntu-GNOME 16.04 LTS "Xenial Xerus" - Alpha amd64 
(20151110)
  Package: alsa-driver (not installed)
  ProcVersionSignature: Ubuntu 4.2.0-19.23-generic 4.2.6
  Tags:  xenial
  Uname: Linux 4.2.0-19-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 09/25/2015
  dmi.bios.vendor: Insyde Corp.
  dmi.bios.version: V1.02
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: Aspire VN7-792G
  dmi.board.vendor: Acer
  dmi.board.version: V1.02
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.02
  dmi.modalias: 
dmi:bvnInsydeCorp.:bvrV1.02:bd09/25/2015:svnAcer:pnAspireVN7-792G:pvrV1.02:rvnAcer:rnAspireVN7-792G:rvrV1.02:cvnAcer:ct10:cvrV1.02:
  dmi.product.name: Aspire VN7-792G
  dmi.product.version: V1.02
  dmi.sys.vendor: Acer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1523100/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1533631] Re: dhclient killed when DHCPv6 lease is out-of date

[Jason C Daniels]

I'm getting DOS'd about 20 times a day as a result of this issue.

Could a "band-aid" shell script be whipped up by anyone in the know, to
physically purge the expired lease files periodically, and posted here?

I would gladly set such a script to run as a "cleanup service" or even
run it manually, while the proper fix is implemented.

Thanks,
Jason

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to isc-dhcp in Ubuntu.
https://bugs.launchpad.net/bugs/1533631

Title:
  dhclient killed when DHCPv6 lease is out-of date

Status in NetworkManager:
  Confirmed
Status in isc-dhcp package in Ubuntu:
  In Progress
Status in network-manager package in Ubuntu:
  In Progress

Bug description:
  Network Manager summarily kills the IPv6 dhclient process when the
  DHCPv6 lease contained in the dhclient6-${UUID}.lease file is out-of
  date, leaving the IPv6 interface without a stateful IPv6 address, or,
  if the "require IPv6 address on this interface" option is enabled,
  causes NM to cycle continuously deactivating and reactivating the
  interface (including the IPv4 addresses).

  This is effectively a Denial Of Service. It can be trivially induced
  if, for example, the dhclient6-$(UUID}.lease file contains a lease
  that was issued before the user went away on vacation or the PC wasn't
  connected to the same network for a few days (depending on the lease
  renew/rebind/expiry times). Calculation on the old lease of

  start + preferred_lifetime < NOW

  triggers dhclient to 'DEPREFER6' the lease (withdraw the address
  record) and ask the DHCPv6 server for a new lease, but Network Manager
  will kill the dhclient because it only sees an 'EXPIRE6' state change.

  In summary, when the DHCPv6 state transitions from "bound" to
  "unknown" then "expire" to "done" Network Manager kills the 'dhclient'
  process before it has chance to request and bind a fresh lease, If
  'dhclient' is run manually with the same command-line options and
  allowed to continue running it correctly gains a new lease.

  Network Manager doesn't know how to handle "DEPREF6", which is sent
  from isc-dhcp dhclient to the helper script (set by "-sf" option).

  So it seems that to correctly solve this issue Network Manager must be
  taught how to handle DEPREF6.

  /var/log/syslog will show a message from dhclient of the form:

  dhclient: PRC: Address 2a02:8011:2007::2 depreferred.

To manage notifications about this bug go to:
https://bugs.launchpad.net/network-manager/+bug/1533631/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1290217] Re: The overwriting error message was: Key file does not have group 'connectivity'

[Eric Wright]

I can confirm that sfbanjo's solution worked for me.

sfbanjo (sfbanjo) wrote on 2016-02-03:  #22
The solution is here:

http://askubuntu.com/a/727462

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1290217

Title:
  The overwriting error message was: Key file does not have group
  'connectivity'

Status in network-manager package in Ubuntu:
  Confirmed

Bug description:
  Looking at /var/log/upstart/network-manager.log, that error is
  written:

  
  (NetworkManager:969): GLib-WARNING **: GError set over the top of a previous 
GError or uninitialized memory.
  This indicates a bug in someone's code. You must ensure an error is NULL 
before it's set.
  The overwriting error message was: Key file does not have group 'connectivity'

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: network-manager 0.9.8.8-0ubuntu5
  ProcVersionSignature: Ubuntu 3.13.0-16.36-generic 3.13.5
  Uname: Linux 3.13.0-16-generic i686
  ApportVersion: 2.13.3-0ubuntu1
  Architecture: i386
  CurrentDesktop: GNOME
  Date: Mon Mar 10 07:02:37 2014
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2013-10-25 (135 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release i386 (20131021.1)
  IpRoute:
   default via 192.168.1.1 dev eth0  proto static 
   192.168.1.0/24 dev eth0  proto kernel  scope link  src 192.168.1.3  metric 1
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
   
   eth1  no wireless extensions.
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
   WimaxEnabled=true
  RfKill:
   
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  WifiSyslog:
   
  modified.conffile..etc.NetworkManager.NetworkManager.conf: [modified]
  mtime.conffile..etc.NetworkManager.NetworkManager.conf: 
2013-12-25T13:58:11.169010
  nmcli-con:
   NAME  UUID   TYPE
  TIMESTAMPTIMESTAMP-REAL AUTOCONNECT   READONLY   
DBUS-PATH 
   Wired connection 17cca4ae1-9b74-45ac-bc15-7b1757516613   
802-3-ethernet1394431189   Mon 10 Mar 2014 06:59:49 CET   yes   
no /org/freedesktop/NetworkManager/Settings/1
   Connexion filaire 2   2f951ef2-14cf-4fb5-a89a-b83bdae4731d   
802-3-ethernet1389770221   Wed 15 Jan 2014 08:17:01 CET   yes   
no /org/freedesktop/NetworkManager/Settings/0
  nmcli-dev:
   DEVICE TYPE  STATE DBUS-PATH 
 
   eth1   802-3-ethernetunavailable   
/org/freedesktop/NetworkManager/Devices/1  
   eth0   802-3-ethernetconnected 
/org/freedesktop/NetworkManager/Devices/0
  nmcli-nm:
   RUNNING VERSIONSTATE   NET-ENABLED   WIFI-HARDWARE   
WIFI   WWAN-HARDWARE   WWAN  
   running 0.9.8.8connected   enabled   enabled 
enabledenabled disabled

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1290217/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1255219] Re: paquete libc6 2.15-0ubuntu10.4 pudo instalar / actualizar: el subproceso script pre-installation nuevo devolvió el Código de Salida de error 1

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: eglibc (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to eglibc in Ubuntu.
https://bugs.launchpad.net/bugs/1255219

Title:
  paquete libc6 2.15-0ubuntu10.4 pudo instalar / actualizar: el
  subproceso script pre-installation nuevo devolvió el Código de Salida
  de error 1

Status in eglibc package in Ubuntu:
  Confirmed

Bug description:
  pecado nada Instalar sí puedo debido a Paquetes rotos libc6,
  libc6-dev. No Se Puede Actualizar libc6 2.15-Oubuntu 10.4 a
  2.15-Oubntu 10.5, Entrar usando ubuntu 12.04, No Se Estafadores
  arregla dpkg NI sinápticas

  ProblemType: Paquete 
  DistroRelease: Ubuntu 12.04 
  Paquete: libc6 2.15-0ubuntu10.4 
  ProcVersionSign ratura: Ubuntu 3.2.0-55.85-generic 3.2.51 
  Uname: Linux i686 3.2.0-55-generic 
  NonfreeKernelMo Dules: fglrx 
  ApportVersion: 2.0.1- 0ubuntu17.4 
  AptOrdering: 
   libc6: Instalar 
   libc6: Configurar 
   libc6-dev: Configurar 
  Arquitectura: i386 
  Fecha: 26 de marzo de 2013 13:24:06 noviembre 
  DuplicateSignature: Paquete: libc6:. 2. 15-0ubuntu10 4: el subproceso script 
pre-installation nuevo devolvió el Código de Salida de error 1 
  ErrorMessage: el subproceso script pre-installation nuevo devolvió el Código 
de Salida de error 1 
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 ( 
20120423) 
  MarkForUpload: Verdadero 
  SourcePackage: EGLIBC 
  Título: Paquete de libc6 Fallo 2,15-0ubuntu10.4 para instalar / actualizar: 
el subproceso script pre-installation nuevo devolvió el Código de Salida de 
error 1 
  UpgradeStatus: Sin Registro de Actualización real (probablemente Instalación 
nueva )

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/1255219/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1585818] Re: The selection is not shown when renaming in nautilus.

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gtk+3.0 (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1585818

Title:
  The selection is not shown when renaming in nautilus.

Status in gtk+3.0 package in Ubuntu:
  Confirmed

Bug description:
  When you rename something in nautilus and select part of the text, the
  selection is not shown.

  Steps to reproduce:
   * Right click on a file or a folder and click rename.
 (at this time the name should be automatically selected)
   * If not automatically selected, manually select part of the name.

  Expected behavior:
   * selected text color should change from black to white
 (or from white to a brighter white if the dark theme is enabled).
   * selected text background color should change from white to blue (or other 
color)
 (or from dark-grey to to blue (or other color) if the dark theme is 
enabled).

  Actual behavior:
   * the text color is changing in the expected way.
   * the background color is not changing (or is set to a transparent color).

  In the attached screenshot I've selected only "ThisTextIsSelected" and NOT 
selected "ThisIsNotSelected".
  In the screenshot is shown the behavior with both the light and dark Adwaita 
theme.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: nautilus 1:3.18.4.is.3.14.3-0ubuntu4
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Thu May 26 00:00:46 2016
  GsettingsChanges:
   b'org.gnome.nautilus.preferences' b'sort-directories-first' b'true'
   b'org.gnome.nautilus.window-state' b'sidebar-width' b'228'
   b'org.gnome.nautilus.window-state' b'geometry' b"'967x757+556+239'"
   b'org.gnome.nautilus.window-state' b'maximized' b'true'
   b'org.gnome.nautilus.list-view' b'default-column-order' b"['name', 'size', 
'type', 'date_modified', 'date_accessed', 'owner', 'group', 'permissions', 
'mime_type', 'where', 'RabbitVCS::age_column', 'RabbitVCS::author_column', 
'RabbitVCS::revision_column', 'RabbitVCS::status_column']"
  InstallationDate: Installed on 2016-04-22 (32 days ago)
  InstallationMedia: Ubuntu-GNOME 16.04 LTS "Xenial Xerus" - Release amd64 
(20160421)
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  SourcePackage: nautilus
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1585818/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586826] [NEW] VPN authentication steals focus on login screen.

[mark johnson]

Public bug reported:

Steps to reproduce:
Set up a VPN connection in network manager using password authentication, and 
store the password.
Set up a Wireless network to connect automaticall, and to automatically connect 
to the configured VPN.
Confirm that the network and VPN connect without prompting you for the password.
Log out or reboot to the login screen.
Wait for the wireless network to connect.  The VPN authentication dialog 
appears, and prevents you from typing in the login form.  The dialogue can be 
cancelled, but it reappears shortly after, making it difficult to log in.

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: network-manager 1.1.93-0ubuntu4
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
Uname: Linux 4.4.0-22-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
CurrentDesktop: Unity
Date: Sun May 29 20:38:50 2016
EcryptfsInUse: Yes
IfupdownConfig:
 # interfaces(5) file used by ifup(8) and ifdown(8)
 auto lo
 iface lo inet loopback
InstallationDate: Installed on 2015-08-31 (272 days ago)
InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
NetworkManager.state:
 [main]
 NetworkingEnabled=true
 WirelessEnabled=true
 WWANEnabled=true
 WimaxEnabled=true
SourcePackage: network-manager
UpgradeStatus: Upgraded to xenial on 2016-04-22 (36 days ago)
mtime.conffile..etc.NetworkManager.NetworkManager.conf: 
2015-09-02T20:13:30.618545
nmcli-dev:
 DEVICE  TYPE  STATE  DBUS-PATH  
CONNECTION  CON-UUID  CON-PATH  
  
 tun0tun   connected  /org/freedesktop/NetworkManager/Devices/2  tun0   
 1d00cd2d-9244-4385-a7b6-0272cd616049  
/org/freedesktop/NetworkManager/ActiveConnection/10 
 wlan0   wifi  connected  /org/freedesktop/NetworkManager/Devices/0  MJ_JF  
 bfecb4ab-406c-4cd1-bcdf-913b4973f119  
/org/freedesktop/NetworkManager/ActiveConnection/8  
 lo  loopback  unmanaged  /org/freedesktop/NetworkManager/Devices/1  -- 
 ----
nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: 
Error: Object 'nm' is unknown, try 'nmcli help'.

** Affects: network-manager (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug xenial

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1586826

Title:
  VPN authentication steals focus on login screen.

Status in network-manager package in Ubuntu:
  New

Bug description:
  Steps to reproduce:
  Set up a VPN connection in network manager using password authentication, and 
store the password.
  Set up a Wireless network to connect automaticall, and to automatically 
connect to the configured VPN.
  Confirm that the network and VPN connect without prompting you for the 
password.
  Log out or reboot to the login screen.
  Wait for the wireless network to connect.  The VPN authentication dialog 
appears, and prevents you from typing in the login form.  The dialogue can be 
cancelled, but it reappears shortly after, making it difficult to log in.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: network-manager 1.1.93-0ubuntu4
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Sun May 29 20:38:50 2016
  EcryptfsInUse: Yes
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2015-08-31 (272 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
   WimaxEnabled=true
  SourcePackage: network-manager
  UpgradeStatus: Upgraded to xenial on 2016-04-22 (36 days ago)
  mtime.conffile..etc.NetworkManager.NetworkManager.conf: 
2015-09-02T20:13:30.618545
  nmcli-dev:
   DEVICE  TYPE  STATE  DBUS-PATH  
CONNECTION  CON-UUID  CON-PATH  
  
   tun0tun   connected  /org/freedesktop/NetworkManager/Devices/2  tun0 
   1d00cd2d-9244-4385-a7b6-0272cd616049  
/org/freedesktop/NetworkManager/ActiveConnection/10 
   wlan0   wifi  connected  /org/freedesktop/NetworkManager/Devices/0  
MJ_JF   bfecb4ab-406c-4cd1-bcdf-913b4973f119  
/org/freedesktop/NetworkManager/ActiveConnection/8  
   lo  loopback  unmanaged  /org/freedesktop/NetworkManager/Devices/1  --   
   ----
  nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 
2: Error: Object 'nm' is unknown, try 'nmcli help'.

To manage notifications about this bug go to:

[Touch-packages] [Bug 1586820] [NEW] cc

[Bruno]

Public bug reported:

hhfd

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xorg 1:7.7+13ubuntu3
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
Uname: Linux 4.4.0-22-generic x86_64
.tmp.unity_support_test.0:
 
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
Date: Sun May 29 20:44:44 2016
DistUpgraded: Fresh install
DistroCodename: xenial
DistroVariant: ubuntu
DkmsStatus: bcmwl, 6.30.223.248+bdcom, 4.4.0-22-generic, x86_64: installed
GraphicsCard:
 Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7480D] [1002:9993] 
(prog-if 00 [VGA controller])
   Subsystem: ASRock Incorporation Trinity [Radeon HD 7480D] [1849:9993]
InstallationDate: Installed on 2016-02-11 (108 days ago)
InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1)
MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
ProcEnviron:
 LANGUAGE=es_ES
 PATH=(custom, no user)
 LANG=es_ES.UTF-8
 SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed 
root=UUID=7c6fe621-bcf7-4dc7-9655-fd6cd9050be9 ro quiet splash vt.handoff=7
SourcePackage: xorg
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 05/11/2015
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: P2.00
dmi.board.name: FM2A58M-VG3+ R2.0
dmi.board.vendor: ASRock
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP2.00:bd05/11/2015:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnFM2A58M-VG3+R2.0:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.name: To Be Filled By O.E.M.
dmi.product.version: To Be Filled By O.E.M.
dmi.sys.vendor: To Be Filled By O.E.M.
version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.67-1
version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2
version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2
xserver.bootTime: Sun May 29 13:12:18 2016
xserver.configfile: default
xserver.errors:
 
xserver.logfile: /var/log/Xorg.0.log
xserver.version: 2:1.18.3-1ubuntu2
xserver.video_driver: radeon

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug compiz-0.9 ubuntu xenial

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1586820

Title:
  cc

Status in xorg package in Ubuntu:
  New

Bug description:
  hhfd

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  .tmp.unity_support_test.0:
   
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Sun May 29 20:44:44 2016
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  DkmsStatus: bcmwl, 6.30.223.248+bdcom, 4.4.0-22-generic, x86_64: installed
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7480D] [1002:9993] 
(prog-if 00 [VGA controller])
 Subsystem: ASRock Incorporation Trinity [Radeon HD 7480D] [1849:9993]
  InstallationDate: Installed on 2016-02-11 (108 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
  ProcEnviron:
   LANGUAGE=es_ES
   PATH=(custom, no user)
   LANG=es_ES.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed 
root=UUID=7c6fe621-bcf7-4dc7-9655-fd6cd9050be9 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/11/2015
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P2.00
  dmi.board.name: FM2A58M-VG3+ R2.0
  dmi.board.vendor: ASRock
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To 

[Touch-packages] [Bug 1586813] [NEW] package hicolor-icon-theme 0.15-0ubuntu1 failed to install/upgrade: Trigger bilden eine Schleife, aufgegeben

[Ady Ayala]

Public bug reported:

when trying to upgrade from ubuntu 15.10 to ubuntu 16.04

ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: hicolor-icon-theme 0.15-0ubuntu1
ProcVersionSignature: Ubuntu 4.2.0-36.41-generic 4.2.8-ckt8
Uname: Linux 4.2.0-36-generic i686
NonfreeKernelModules: nvidia
ApportVersion: 2.19.1-0ubuntu5
Architecture: i386
Date: Sun May 29 20:12:39 2016
Dependencies:
 
DuplicateSignature: package:hicolor-icon-theme:0.15-0ubuntu1:Trigger bilden 
eine Schleife, aufgegeben
ErrorMessage: Trigger bilden eine Schleife, aufgegeben
InstallationDate: Installed on 2014-06-10 (718 days ago)
InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release i386 
(20130820.1)
PackageArchitecture: all
RelatedPackageVersions:
 dpkg 1.18.4ubuntu1.1
 apt  1.2.10ubuntu1
SourcePackage: hicolor-icon-theme
Title: package hicolor-icon-theme 0.15-0ubuntu1 failed to install/upgrade: 
Trigger bilden eine Schleife, aufgegeben
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: hicolor-icon-theme (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 need-duplicate-check xenial

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to hicolor-icon-theme in
Ubuntu.
https://bugs.launchpad.net/bugs/1586813

Title:
  package hicolor-icon-theme 0.15-0ubuntu1 failed to install/upgrade:
  Trigger bilden eine Schleife, aufgegeben

Status in hicolor-icon-theme package in Ubuntu:
  New

Bug description:
  when trying to upgrade from ubuntu 15.10 to ubuntu 16.04

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: hicolor-icon-theme 0.15-0ubuntu1
  ProcVersionSignature: Ubuntu 4.2.0-36.41-generic 4.2.8-ckt8
  Uname: Linux 4.2.0-36-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: i386
  Date: Sun May 29 20:12:39 2016
  Dependencies:
   
  DuplicateSignature: package:hicolor-icon-theme:0.15-0ubuntu1:Trigger bilden 
eine Schleife, aufgegeben
  ErrorMessage: Trigger bilden eine Schleife, aufgegeben
  InstallationDate: Installed on 2014-06-10 (718 days ago)
  InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release i386 
(20130820.1)
  PackageArchitecture: all
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.1
   apt  1.2.10ubuntu1
  SourcePackage: hicolor-icon-theme
  Title: package hicolor-icon-theme 0.15-0ubuntu1 failed to install/upgrade: 
Trigger bilden eine Schleife, aufgegeben
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/hicolor-icon-theme/+bug/1586813/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586806] [NEW] package python3-problem-report 2.14.1-0ubuntu3.21 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[Demonoid Death]

Public bug reported:

Se produce errores al iniciar el sistema.

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: python3-problem-report 2.14.1-0ubuntu3.21
ProcVersionSignature: Ubuntu 3.13.0-86.131-generic 3.13.11-ckt39
Uname: Linux 3.13.0-86-generic i686
ApportVersion: 2.14.1-0ubuntu3.21
Architecture: i386
Date: Sat May 28 19:23:31 2016
Dependencies:
 
DuplicateSignature: 
package:python3-problem-report:2.14.1-0ubuntu3.21:subprocess installed 
post-installation script returned error exit status 1
ErrorMessage: subprocess installed post-installation script returned error exit 
status 1
InstallationDate: Installed on 2016-03-17 (73 days ago)
InstallationMedia: Ubuntu 12.04.5 LTS "Precise Pangolin" - Release i386 
(20140807.1)
PackageArchitecture: all
RelatedPackageVersions:
 dpkg 1.17.5ubuntu5.6
 apt  1.0.1ubuntu2.14
SourcePackage: apport
Title: package python3-problem-report 2.14.1-0ubuntu3.21 failed to 
install/upgrade: subprocess installed post-installation script returned error 
exit status 1
UpgradeStatus: Upgraded to trusty on 2016-04-21 (38 days ago)

** Affects: apport (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 need-duplicate-check trusty

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1586806

Title:
  package python3-problem-report 2.14.1-0ubuntu3.21 failed to
  install/upgrade: subprocess installed post-installation script
  returned error exit status 1

Status in apport package in Ubuntu:
  New

Bug description:
  Se produce errores al iniciar el sistema.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: python3-problem-report 2.14.1-0ubuntu3.21
  ProcVersionSignature: Ubuntu 3.13.0-86.131-generic 3.13.11-ckt39
  Uname: Linux 3.13.0-86-generic i686
  ApportVersion: 2.14.1-0ubuntu3.21
  Architecture: i386
  Date: Sat May 28 19:23:31 2016
  Dependencies:
   
  DuplicateSignature: 
package:python3-problem-report:2.14.1-0ubuntu3.21:subprocess installed 
post-installation script returned error exit status 1
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 1
  InstallationDate: Installed on 2016-03-17 (73 days ago)
  InstallationMedia: Ubuntu 12.04.5 LTS "Precise Pangolin" - Release i386 
(20140807.1)
  PackageArchitecture: all
  RelatedPackageVersions:
   dpkg 1.17.5ubuntu5.6
   apt  1.0.1ubuntu2.14
  SourcePackage: apport
  Title: package python3-problem-report 2.14.1-0ubuntu3.21 failed to 
install/upgrade: subprocess installed post-installation script returned error 
exit status 1
  UpgradeStatus: Upgraded to trusty on 2016-04-21 (38 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1586806/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1577724] Re: NM doesn't sets the DNS properly, forces local dnsmasq as a resolver

[Uqbar]

I choose to get just the IP address and set my own DNS servers.
I expect to see those addresses appear somewhere, usually /etc/resolve.conf, 
the standard resolver configuration file.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1577724

Title:
  NM doesn't sets the DNS properly, forces local dnsmasq as a resolver

Status in network-manager package in Ubuntu:
  Incomplete

Bug description:
  1. Setup a network with DHCP address, gateway and DNS.
  2. Connect to that network.
  3. Check the resolver configured in /etc/resolv.conf

  Expected result:
  To find "nameserver" set to the DNS addresses provided by the external DHCP 
server

  Actual result:
  "nameserver=127.0.1.1" in any case.

  This related to https://bugs.launchpad.net/bugs/1577720

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: network-manager 1.1.93-0ubuntu4
  ProcVersionSignature: Ubuntu 4.4.0-21.37-lowlatency 4.4.6
  Uname: Linux 4.4.0-21-lowlatency x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Tue May  3 12:42:19 2016
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2016-04-22 (10 days ago)
  InstallationMedia: Kubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  IpRoute:
   default via 192.168.1.1 dev wlxc4e9840ddc04  proto static  metric 600 
   169.254.0.0/16 dev wlxc4e9840ddc04  scope link  metric 1000 
   192.168.1.0/24 dev wlxc4e9840ddc04  proto kernel  scope link  src 
192.168.1.95  metric 600
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-dev:
   DEVICE TYPE  STATE DBUS-PATH 
 CONNECTION  CON-UUID  CON-PATH 
  
   wlxc4e9840ddc04wifi  connected 
/org/freedesktop/NetworkManager/Devices/0  SIGKILL 
2986445c-d935-4b58-b3ca-da614dd4  
/org/freedesktop/NetworkManager/ActiveConnection/5 
   C0:EE:FB:44:15:8A  btdisconnected  
/org/freedesktop/NetworkManager/Devices/3  --  --   
 -- 
   enp3s0 ethernet  unavailable   
/org/freedesktop/NetworkManager/Devices/1  --  --   
 -- 
   lo loopback  unmanaged 
/org/freedesktop/NetworkManager/Devices/2  --  --   
 --
  nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 
2: Error: Object 'nm' is unknown, try 'nmcli help'.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1577724/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1549455] Re: Unity8-dash on Intel Atom graphics crashes and restarts continuously [qtubuntu: ASSERT: "eglDestroyContext(mEglDisplay, EglContext) == EGL_TRUE"]

[Emanuele Antonio Faraone]

@Gerry, have you tested it on pineview hardware?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1549455

Title:
  Unity8-dash on Intel Atom graphics crashes and restarts continuously
  [qtubuntu: ASSERT: "eglDestroyContext(mEglDisplay, EglContext) ==
  EGL_TRUE"]

Status in Mir:
  Invalid
Status in qtubuntu:
  In Progress
Status in mesa package in Ubuntu:
  Invalid
Status in mir package in Ubuntu:
  Invalid
Status in qtdeclarative package in Ubuntu:
  Confirmed
Status in qtmir package in Ubuntu:
  Confirmed
Status in qtubuntu package in Ubuntu:
  Triaged
Status in unity8 package in Ubuntu:
  Confirmed

Bug description:
  Qt clients are failing to create an egl context when running on Intel
  Pineview systems under Mir.

  eglCreateContext fails with a EGL_BAD_MATCH error code.

  When it fails, Qt tries to delete & recreate the context, which then
  crashes the client (bug 1580118)

  
  === Original bug description ===
  This bug Makes the pc UNUSABLE
  when I try to launch Unity 8 and Mir, after writing the password on the login 
(in the image attached) the bar to enter the password disappears and my 
computer screen stays stuck without them let me do anything. the connection 
begins to separate and reattach alone and I can only move the cursor. it makes 
the computer unusable and I am forced to restart forced to then enter into 
Unity 7. represented in the screenshot is the lock status after entering the 
password.
  Version: unity8.12+16.04.201604.01.1
  Version of Mir : 0.21

To manage notifications about this bug go to:
https://bugs.launchpad.net/mir/+bug/1549455/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1581270] Re: Hybrid Graphics: [drm:si_resume [radeon]] *ERROR* si startup failed on resume

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: xorg (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1581270

Title:
  Hybrid Graphics: [drm:si_resume [radeon]] *ERROR* si startup failed on
  resume

Status in xorg package in Ubuntu:
  Confirmed

Bug description:
  dmesg shows issues with being able to use the discrete graphics card
  (relevant dmesg lines attached).

  Grub does pass "radeon.modeset=1" but it doesn't seem to make a
  difference. If I pass both "radeon.modeset=1" and "radeon.startpm=1"to
  the kernel, then it does not error (except for the VCE error -110,
  which is probably harmless).

  Running `DRI_PRIME=1 glxgears`:
  - with "radeon.modeset=1" and "radeon.startpm=1", no error but only a black 
window with a visible top bar.
  - with just "radeon.modeset=1", error (attached as 'glxgears').

  Results are similar on Ubuntu GNOME 16.04, except with
  "radeon.modeset=1" and "radeon.startpm=1" set. It works, but lots of
  screen tearing.

  Attached are relevant dmesg lines, grep'd with 'drm'. I'll also be
  attaching entire contents of dmesg, /var/log/syslog, etc., but TLDR:

  [   22.916285] [drm] ring test on 0 succeeded in 2 usecs
  [   22.916289] [drm] ring test on 1 succeeded in 1 usecs
  [   22.916292] [drm] ring test on 2 succeeded in 1 usecs
  [   22.916299] [drm] ring test on 3 succeeded in 3 usecs
  [   22.916304] [drm] ring test on 4 succeeded in 3 usecs
  [   23.092271] [drm] ring test on 5 succeeded in 2 usecs
  [   23.092276] [drm] UVD initialized successfully.
  [   23.092311] [drm] ib test on ring 0 succeeded in 0 usecs
  [   23.092349] [drm] ib test on ring 1 succeeded in 0 usecs
  [   23.092375] [drm] ib test on ring 2 succeeded in 0 usecs
  [   23.092392] [drm] ib test on ring 3 succeeded in 0 usecs
  [   23.092407] [drm] ib test on ring 4 succeeded in 0 usecs
  [   33.241928] [drm:uvd_v1_0_ib_test [radeon]] *ERROR* radeon: fence wait 
failed (-35).
  [   33.241948] [drm:radeon_ib_ring_tests [radeon]] *ERROR* radeon: failed 
testing IB on ring 5 (-35).

  lsb_release -rd:
  Description:  Ubuntu 16.04 LTS
  Release:  16.04

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-22.39-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  .tmp.unity_support_test.0:

  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Thu May 12 20:43:03 2016
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] 
(rev 09) (prog-if 00 [VGA controller])
     Subsystem: Samsung Electronics Co Ltd 3rd Gen Core processor Graphics 
Controller [144d:c0e6]
     Subsystem: Samsung Electronics Co Ltd Mars [Radeon HD 8670A/8670M/8750M] 
[144d:c0e6]
  InstallationDate: Installed on 2016-05-13 (0 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. 870Z5E/880Z5E/680Z5E
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed 
root=UUID=644ba363-51c7-419c-8544-2ff7be960f21 ro quiet splash radeon.modeset=1 
vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/21/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P05ADH.017.140421.SH
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: NP680Z5E-X01US
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: SEC_SW_REVISION_1234567890ABCD
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP05ADH.017.140421.SH:bd04/21/2014:svnSAMSUNGELECTRONICSCO.,LTD.:pn870Z5E/880Z5E/680Z5E:pvrP05ADH:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP680Z5E-X01US:rvrSEC_SW_REVISION_1234567890ABCD:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A:
  dmi.product.name: 870Z5E/880Z5E/680Z5E
  dmi.product.version: P05ADH
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.
  version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.67-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2
  version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2
  version.xserver-xorg-input-evdev: 

[Touch-packages] [Bug 1586795] [NEW] Audio attachments are unplayable

[Michael Sheldon]

Public bug reported:

This only occurs in rc-proposed, stable works correctly

Steps to reproduce

1. Send or receive an audio clip

2. Press play on the message after sending/receiving (not on the
recording preview)

Expected result

Audio should playback

Actual result

Background of message is highlighted, as though the touch is received by
the area behind the audio item instead of the play button itself

** Affects: messaging-app (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1586795

Title:
  Audio attachments are unplayable

Status in messaging-app package in Ubuntu:
  New

Bug description:
  This only occurs in rc-proposed, stable works correctly

  Steps to reproduce

  1. Send or receive an audio clip

  2. Press play on the message after sending/receiving (not on the
  recording preview)

  Expected result

  Audio should playback

  Actual result

  Background of message is highlighted, as though the touch is received
  by the area behind the audio item instead of the play button itself

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1586795/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1583055] Re: Empty settings.ini created for every scope even if it doesn't have settings

[Marcus Tomlinson]

** Changed in: canonical-devices-system-image
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1583055

Title:
  Empty settings.ini created for every scope even if it doesn't have
  settings

Status in Canonical System Image:
  Fix Released
Status in unity-scopes-shell package in Ubuntu:
  Fix Released

Bug description:
  After recent changes to scope settings handling in shell plugin (the
  switch from QSettings to glib-based settings) we now get empty
  settings.ini and settings dir created for absolutely every scope in
  the system, even if it doesn't offer any settings. This doesn't pose
  any issues as far as I can tell (other than polluting fs), but it
  would be nice not to do that if not needed.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1583055/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1572244] Re: Kubuntu 16.04 requires that the wifi password be entered twice before wifi can be used

[Saurav Sengupta]

It asked for the password twice even on a freshly installed system, not
just in a live session.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1572244

Title:
  Kubuntu 16.04 requires that the wifi password be entered twice before
  wifi can be used

Status in network-manager package in Ubuntu:
  Confirmed

Bug description:
  Kubuntu 16.04 ISO number 20160417.1 Xenial Final
  Bug reported against network-manager 
  Every time I tried the live Kubuntu 16.04 image on a Lenovo t420 laptop it 
requires to enter the wifi password twice before I can use the wifi. Once from 
the network icon panel, then second time a prompt on the desktop to enter the 
wifi password.

  I do not know if this is typical behavior of Kubuntu since I usually use GTK 
base desktops.
  I guess network-manager is the right package to file this report against.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: network-manager 1.1.93-0ubuntu4
  ProcVersionSignature: Ubuntu 4.4.0-18.34-generic 4.4.6
  Uname: Linux 4.4.0-18-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CasperVersion: 1.373
  CurrentDesktop: KDE
  Date: Tue Apr 19 16:48:02 2016
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  IpRoute:
   default via 192.168.77.1 dev wlp3s0  proto static  metric 600 
   169.254.0.0/16 dev wlp3s0  scope link  metric 1000 
   192.168.77.0/24 dev wlp3s0  proto kernel  scope link  src 192.168.77.128  
metric 600
  LiveMediaBuild: Kubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160417.1)
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-con:
   NAMEUUID  TYPE 
TIMESTAMP   TIMESTAMP-REAL   AUTOCONNECT  AUTOCONNECT-PRIORITY  
READONLY  DBUS-PATH   ACTIVE  DEVICE  STATE 
 ACTIVE-PATH
   KNOPPIX adfb3f1c-39c2-4410-b1dc-ca553326da52  802-11-wireless  
1461084315  Tue 19 Apr 2016 04:45:15 PM UTC  yes  0 
no/org/freedesktop/NetworkManager/Settings/1  yes wlp3s0  activated 
 /org/freedesktop/NetworkManager/ActiveConnection/3 
   Wired connection 1  4957fbd0-8ffa-4de8-aa18-275e6dfdcd9e  802-3-ethernet   
1461077415  Tue 19 Apr 2016 02:50:15 PM UTC  yes  4294966297
no/org/freedesktop/NetworkManager/Settings/0  no  --  --
 --
  nmcli-dev:
   DEVICE   TYPE  STATEDBUS-PATH  
CONNECTION  CON-UUID  CON-PATH  
 
   wlp3s0   wifi  connected/org/freedesktop/NetworkManager/Devices/0  
KNOPPIX adfb3f1c-39c2-4410-b1dc-ca553326da52  
/org/freedesktop/NetworkManager/ActiveConnection/3 
   enp0s25  ethernet  unavailable  /org/freedesktop/NetworkManager/Devices/1  
--  ----
 
   lo   loopback  unmanaged/org/freedesktop/NetworkManager/Devices/2  
--  ----
  nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 
2: Error: Object 'nm' is unknown, try 'nmcli help'.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1572244/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1193072] Re: bluetooth dialup network disconnection problem

[Paul White]

** Package changed: ubuntu => bluez (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1193072

Title:
  bluetooth dialup network disconnection problem

Status in bluez package in Ubuntu:
  New

Bug description:
  Scenario- added my phone via Bluetooth> Dialup Network connection setup 
successful> and browsing ok
  Bug - at the unity bar there some icon like 0004 and below 'disconnect'
  when i try to disconnect the connection or shut down the pc then a huge 
errors on black screen and says "bug a c1063f99" and other ppp- somethings 
  Legacy - i can't share the screen shot and bug text because of black console 
screen

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1193072/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586792] [NEW] every login sesion the same error

[Manuel Gómez]

Public bug reported:

1) The release of Ubuntu you are using, via 'lsb_release -rd'
Description:Ubuntu 14.04.4 LTS
Release:14.04

2) The version of the package you are using, via 'apt-cache policy pkgname' 
apport:
  Instalados: 2.14.1-0ubuntu3.21
  Candidato:  2.14.1-0ubuntu3.21
  Tabla de versión:
 *** 2.14.1-0ubuntu3.21 0
500 http://es.archive.ubuntu.com/ubuntu/ trusty-updates/main i386 
Packages
100 /var/lib/dpkg/status
 2.14.1-0ubuntu3.18 0
500 http://security.ubuntu.com/ubuntu/ trusty-security/main i386 
Packages
 2.14.1-0ubuntu3 0
500 http://es.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages

3) Nothing
4) Nothing

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: apport 2.14.1-0ubuntu3.21
ProcVersionSignature: Ubuntu 3.13.0-86.131-generic 3.13.11-ckt39
Uname: Linux 3.13.0-86-generic i686
NonfreeKernelModules: nvidia
ApportLog:
 
ApportVersion: 2.14.1-0ubuntu3.21
Architecture: i386
CrashReports:
 644:0:134:0:2016-05-28 16:45:42.249523404 +0100:2016-05-28 16:45:42.249523404 
+0100:/var/crash/susres.2016-05-27_23:15:56.754495.upload
 640:0:134:1448334:2016-05-28 16:39:39.321515798 +0100:2016-05-28 
16:39:40.321515798 +0100:/var/crash/susres.2016-05-27_23:15:56.754495.crash
 640:109:134:677244:2016-05-29 15:01:35.298175573 +0100:2016-05-29 
15:01:36.298175573 +0100:/var/crash/linux-image-3.13.0-86-generic.213838.crash
CurrentDesktop: Unity
Date: Sun May 29 16:43:24 2016
InstallationDate: Installed on 2002-01-01 (5262 days ago)
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5)
PackageArchitecture: all
SourcePackage: apport
UpgradeStatus: Upgraded to trusty on 2014-08-25 (642 days ago)

** Affects: apport (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386 trusty

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1586792

Title:
  every login sesion the same error

Status in apport package in Ubuntu:
  New

Bug description:
  1) The release of Ubuntu you are using, via 'lsb_release -rd'
  Description:  Ubuntu 14.04.4 LTS
  Release:  14.04

  2) The version of the package you are using, via 'apt-cache policy pkgname' 
  apport:
Instalados: 2.14.1-0ubuntu3.21
Candidato:  2.14.1-0ubuntu3.21
Tabla de versión:
   *** 2.14.1-0ubuntu3.21 0
  500 http://es.archive.ubuntu.com/ubuntu/ trusty-updates/main i386 
Packages
  100 /var/lib/dpkg/status
   2.14.1-0ubuntu3.18 0
  500 http://security.ubuntu.com/ubuntu/ trusty-security/main i386 
Packages
   2.14.1-0ubuntu3 0
  500 http://es.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages

  3) Nothing
  4) Nothing

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: apport 2.14.1-0ubuntu3.21
  ProcVersionSignature: Ubuntu 3.13.0-86.131-generic 3.13.11-ckt39
  Uname: Linux 3.13.0-86-generic i686
  NonfreeKernelModules: nvidia
  ApportLog:
   
  ApportVersion: 2.14.1-0ubuntu3.21
  Architecture: i386
  CrashReports:
   644:0:134:0:2016-05-28 16:45:42.249523404 +0100:2016-05-28 
16:45:42.249523404 +0100:/var/crash/susres.2016-05-27_23:15:56.754495.upload
   640:0:134:1448334:2016-05-28 16:39:39.321515798 +0100:2016-05-28 
16:39:40.321515798 +0100:/var/crash/susres.2016-05-27_23:15:56.754495.crash
   640:109:134:677244:2016-05-29 15:01:35.298175573 +0100:2016-05-29 
15:01:36.298175573 +0100:/var/crash/linux-image-3.13.0-86-generic.213838.crash
  CurrentDesktop: Unity
  Date: Sun May 29 16:43:24 2016
  InstallationDate: Installed on 2002-01-01 (5262 days ago)
  InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5)
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: Upgraded to trusty on 2014-08-25 (642 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1586792/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1012211] Re: NetworkManager mishandles multiple interfaces on same subnet

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: network-manager (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1012211

Title:
  NetworkManager mishandles multiple interfaces on same subnet

Status in Linux Mint:
  New
Status in network-manager package in Ubuntu:
  New
Status in Debian:
  New
Status in Fedora:
  Unknown

Bug description:
  1) The version and edition of Linux Mint you are using (if you are not
  sure, open a terminal and run "mintwelcome").

  Release: 1 (debian)
  Edition: Debian 64-bit

  2) What you did for the problem to happen, and how to reproduce it.

  In NetworkManager, I configured both wired and wireless network
  interfaces to connect to the same network. I set both interfaces to
  "Off" in NetworkManager. I then turned on and connected the wireless
  interface. After the wireless interface was connected, I turned on and
  connected the wired interface.

  3) What happened.

  When only the wireless network was connected, both the local subnet
  route and default route went over the wireless connect, the only one
  available. Upon connection of the wired interface, NetworkManager
  properly prioritizes the wired interface for the default route, but
  left the wireless network prioritized for the local subnet route. Here
  is an example of the improper routing table, notice that the route for
  wlan0 appears above the route for eth0:

  default via 192.168.77.254 dev eth0  proto static 
  192.168.77.0/24 dev wlan0  proto kernel  scope link  src 192.168.77.41 
  192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.40 

  This is due to the order of the routes in the routing table that
  results from the order that the network connects were enabled. If the
  order of connection is reversed, so are the local subnet routes,
  correcting the issue.

  4) What you expected to happen instead.

  I expected the wired network to be prioritized for both the default
  route and local subnet route, producing a routing table something like
  this:

  default via 192.168.77.254 dev eth0  proto static 
  192.168.77.0/24 dev wlan0  proto kernel  scope link  src 192.168.77.41 metric 
1
  192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.40 metric 0

  5) If the problem happened once, sometimes, or always.

  This problem always happens. At some point in the past the network
  routes were handled properly, producing a routing table that looked
  like this:

  default via 192.168.77.254 dev wlan0  proto static metric 1
  default via 192.168.77.254 dev eth0  proto static metric 0
  192.168.77.0/24 dev wlan0  proto kernel  scope link  src 192.168.77.41 metric 
1
  192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.40 metric 0

  6) Possible relevant reference.

  I found a NetworkManager a couple of bugs about this issue that indicates 
this is a problem with libnl3. Here is the NetworkManager bug report:
  https://bugzilla.gnome.org/show_bug.cgi?id=659983
  https://bugzilla.gnome.org/show_bug.cgi?id=659984

  The second NetworkManager bug (659984) references a libnl mailing list 
message indicating a fix to the issue. Here is that post:
  http://lists.infradead.org/pipermail/libnl/2011-October/000360.html

To manage notifications about this bug go to:
https://bugs.launchpad.net/linuxmint/+bug/1012211/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1295339] Re: USB bluetooth head set doesn't get reactivated

[Paul White]

** Package changed: ubuntu => bluez (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1295339

Title:
  USB bluetooth head set doesn't get reactivated

Status in bluez package in Ubuntu:
  New

Bug description:
  I have a usb bt headset and a seperate mouse both attached to a KVM
  switch.

  Until a few weeks ago I could switch between the two machines easily.
  Now when I switch back to Kubuntu, I can't reactivate the headset
  somehow.

  The BT connection gets established, when I press volume buttons on the
  headset I see the onscreen display. However no sound is being played
  from apps and stuff. Also KDE multimedia settings has the headset
  greyed out.

  I tried to disconnect and reconnect the dongle but that didn't help
  either. ONly rebooting helps.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1295339/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1012211] Re: NetworkManager mishandles multiple interfaces on same subnet

[Paul White]

** Package changed: ubuntu => network-manager (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1012211

Title:
  NetworkManager mishandles multiple interfaces on same subnet

Status in Linux Mint:
  New
Status in network-manager package in Ubuntu:
  New
Status in Debian:
  New
Status in Fedora:
  Unknown

Bug description:
  1) The version and edition of Linux Mint you are using (if you are not
  sure, open a terminal and run "mintwelcome").

  Release: 1 (debian)
  Edition: Debian 64-bit

  2) What you did for the problem to happen, and how to reproduce it.

  In NetworkManager, I configured both wired and wireless network
  interfaces to connect to the same network. I set both interfaces to
  "Off" in NetworkManager. I then turned on and connected the wireless
  interface. After the wireless interface was connected, I turned on and
  connected the wired interface.

  3) What happened.

  When only the wireless network was connected, both the local subnet
  route and default route went over the wireless connect, the only one
  available. Upon connection of the wired interface, NetworkManager
  properly prioritizes the wired interface for the default route, but
  left the wireless network prioritized for the local subnet route. Here
  is an example of the improper routing table, notice that the route for
  wlan0 appears above the route for eth0:

  default via 192.168.77.254 dev eth0  proto static 
  192.168.77.0/24 dev wlan0  proto kernel  scope link  src 192.168.77.41 
  192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.40 

  This is due to the order of the routes in the routing table that
  results from the order that the network connects were enabled. If the
  order of connection is reversed, so are the local subnet routes,
  correcting the issue.

  4) What you expected to happen instead.

  I expected the wired network to be prioritized for both the default
  route and local subnet route, producing a routing table something like
  this:

  default via 192.168.77.254 dev eth0  proto static 
  192.168.77.0/24 dev wlan0  proto kernel  scope link  src 192.168.77.41 metric 
1
  192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.40 metric 0

  5) If the problem happened once, sometimes, or always.

  This problem always happens. At some point in the past the network
  routes were handled properly, producing a routing table that looked
  like this:

  default via 192.168.77.254 dev wlan0  proto static metric 1
  default via 192.168.77.254 dev eth0  proto static metric 0
  192.168.77.0/24 dev wlan0  proto kernel  scope link  src 192.168.77.41 metric 
1
  192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.40 metric 0

  6) Possible relevant reference.

  I found a NetworkManager a couple of bugs about this issue that indicates 
this is a problem with libnl3. Here is the NetworkManager bug report:
  https://bugzilla.gnome.org/show_bug.cgi?id=659983
  https://bugzilla.gnome.org/show_bug.cgi?id=659984

  The second NetworkManager bug (659984) references a libnl mailing list 
message indicating a fix to the issue. Here is that post:
  http://lists.infradead.org/pipermail/libnl/2011-October/000360.html

To manage notifications about this bug go to:
https://bugs.launchpad.net/linuxmint/+bug/1012211/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1193072] [NEW] bluetooth dialup network disconnection problem

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

Scenario- added my phone via Bluetooth> Dialup Network connection setup 
successful> and browsing ok
Bug - at the unity bar there some icon like 0004 and below 'disconnect'
when i try to disconnect the connection or shut down the pc then a huge errors 
on black screen and says "bug a c1063f99" and other ppp- somethings 
Legacy - i can't share the screen shot and bug text because of black console 
screen

** Affects: bluez (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: bot-comment
-- 
bluetooth dialup network disconnection problem
https://bugs.launchpad.net/bugs/1193072
You received this bug notification because you are a member of Ubuntu Touch 
seeded packages, which is subscribed to bluez in Ubuntu.

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1436976] Re: cannot enable bluetooth

[Paul White]

** Package changed: ubuntu => bluez (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1436976

Title:
  cannot enable bluetooth

Status in bluez package in Ubuntu:
  New

Bug description:
  One day I decided pairing my computer with my bluetooth headset. I
  enabled bluetooth via the basic bluetooth manager, and was able to
  connect my headset. Then I turned off my computer, and since then,
  bluetooth isn't working anymore.

  When I go on the bluetooth manager (Applications>System
  Tools>Preferences>Bluetooth), bluetooth is disabled. I can switch it
  to the "on" position, but it stays disabled.

  Ubuntu release : 14.10
  bluetooth package : 4.101-0ubuntu20
  Computer model : Aspire V3-771
  Wireless card : Qualcomm Atheros AR9462

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1436976/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1012211] [NEW] NetworkManager mishandles multiple interfaces on same subnet

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

1) The version and edition of Linux Mint you are using (if you are not
sure, open a terminal and run "mintwelcome").

Release: 1 (debian)
Edition: Debian 64-bit

2) What you did for the problem to happen, and how to reproduce it.

In NetworkManager, I configured both wired and wireless network
interfaces to connect to the same network. I set both interfaces to
"Off" in NetworkManager. I then turned on and connected the wireless
interface. After the wireless interface was connected, I turned on and
connected the wired interface.

3) What happened.

When only the wireless network was connected, both the local subnet
route and default route went over the wireless connect, the only one
available. Upon connection of the wired interface, NetworkManager
properly prioritizes the wired interface for the default route, but left
the wireless network prioritized for the local subnet route. Here is an
example of the improper routing table, notice that the route for wlan0
appears above the route for eth0:

default via 192.168.77.254 dev eth0  proto static 
192.168.77.0/24 dev wlan0  proto kernel  scope link  src 192.168.77.41 
192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.40 

This is due to the order of the routes in the routing table that results
from the order that the network connects were enabled. If the order of
connection is reversed, so are the local subnet routes, correcting the
issue.

4) What you expected to happen instead.

I expected the wired network to be prioritized for both the default
route and local subnet route, producing a routing table something like
this:

default via 192.168.77.254 dev eth0  proto static 
192.168.77.0/24 dev wlan0  proto kernel  scope link  src 192.168.77.41 metric 1
192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.40 metric 0

5) If the problem happened once, sometimes, or always.

This problem always happens. At some point in the past the network
routes were handled properly, producing a routing table that looked like
this:

default via 192.168.77.254 dev wlan0  proto static metric 1
default via 192.168.77.254 dev eth0  proto static metric 0
192.168.77.0/24 dev wlan0  proto kernel  scope link  src 192.168.77.41 metric 1
192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.40 metric 0

6) Possible relevant reference.

I found a NetworkManager a couple of bugs about this issue that indicates this 
is a problem with libnl3. Here is the NetworkManager bug report:
https://bugzilla.gnome.org/show_bug.cgi?id=659983
https://bugzilla.gnome.org/show_bug.cgi?id=659984

The second NetworkManager bug (659984) references a libnl mailing list message 
indicating a fix to the issue. Here is that post:
http://lists.infradead.org/pipermail/libnl/2011-October/000360.html

** Affects: linuxmint
 Importance: Undecided
 Status: New

** Affects: network-manager (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: debian
 Importance: Undecided
 Status: New

** Affects: fedora
 Importance: Unknown
 Status: Unknown

-- 
NetworkManager mishandles multiple interfaces on same subnet
https://bugs.launchpad.net/bugs/1012211
You received this bug notification because you are a member of Ubuntu Touch 
seeded packages, which is subscribed to network-manager in Ubuntu.

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1295339] [NEW] USB bluetooth head set doesn't get reactivated

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

I have a usb bt headset and a seperate mouse both attached to a KVM
switch.

Until a few weeks ago I could switch between the two machines easily.
Now when I switch back to Kubuntu, I can't reactivate the headset
somehow.

The BT connection gets established, when I press volume buttons on the
headset I see the onscreen display. However no sound is being played
from apps and stuff. Also KDE multimedia settings has the headset greyed
out.

I tried to disconnect and reconnect the dongle but that didn't help
either. ONly rebooting helps.

** Affects: bluez (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: bot-comment
-- 
USB bluetooth head set doesn't get reactivated
https://bugs.launchpad.net/bugs/1295339
You received this bug notification because you are a member of Ubuntu Touch 
seeded packages, which is subscribed to bluez in Ubuntu.

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1436976] [NEW] cannot enable bluetooth

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

One day I decided pairing my computer with my bluetooth headset. I
enabled bluetooth via the basic bluetooth manager, and was able to
connect my headset. Then I turned off my computer, and since then,
bluetooth isn't working anymore.

When I go on the bluetooth manager (Applications>System
Tools>Preferences>Bluetooth), bluetooth is disabled. I can switch it to
the "on" position, but it stays disabled.

Ubuntu release : 14.10
bluetooth package : 4.101-0ubuntu20
Computer model : Aspire V3-771
Wireless card : Qualcomm Atheros AR9462

** Affects: bluez (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: 14.10 bluetooth bot-comment
-- 
cannot enable bluetooth
https://bugs.launchpad.net/bugs/1436976
You received this bug notification because you are a member of Ubuntu Touch 
seeded packages, which is subscribed to bluez in Ubuntu.

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1561795] Re: Fullscreen Crash Intel GPU since Ubuntu 15.10

[Michael Kasprzak]

My apologies. I didn't get around to trying it, but I did eventually
upgrade to Ubuntu 16.04, and have been unable to reproduce the problem.
So consider it closed.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1561795

Title:
  Fullscreen Crash Intel GPU since Ubuntu 15.10

Status in xorg package in Ubuntu:
  Expired

Bug description:
  Ever since I upgraded to Ubuntu 15.10, I haven't been able to exit
  fullscreen without video crashing. There are rare cases when I've been
  able to safely exit, but more times than not, it doesn't. This is
  typically when I'm using Chrome to watch YouTube or Twitch video
  streams. The only way out is switch over and do a "killall -u myname".

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 4.2.0-34.39-generic 4.2.8-ckt4
  Uname: Linux 4.2.0-34-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Thu Mar 24 19:57:24 2016
  DistUpgraded: 2015-10-25 04:02:46,508 DEBUG enabling apt cron job
  DistroCodename: wily
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:2203]
  InstallationDate: Installed on 2015-01-03 (446 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  MachineType: LENOVO 343522U
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-34-generic 
root=UUID=a630eb7a-a0ab-49aa-bdb6-8221ae278346 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: Upgraded to wily on 2015-10-25 (151 days ago)
  dmi.bios.date: 09/12/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: GCETA0WW (2.60 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 343522U
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Defined
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrGCETA0WW(2.60):bd09/12/2014:svnLENOVO:pn343522U:pvrThinkPadX230Tablet:rvnLENOVO:rn343522U:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 343522U
  dmi.product.version: ThinkPad X230 Tablet
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.12.2+15.10.20151202-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.65-3
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.4-1intel1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.4-1intel1
  version.xserver-xorg-core: xserver-xorg-core 2:1.17.2-1ubuntu9.1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:7.5.0+git20150819-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20150808-0ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu3
  xserver.bootTime: Thu Mar 24 19:14:03 2016
  xserver.configfile: default
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id 728 
   vendor LGD
  xserver.version: 2:1.17.2-1ubuntu9.1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1561795/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586787] Re: Wrong colors on external TV

[Alin Hanghiuc]

** Attachment added: "result of "xrandr --verbose" from the Mint live DVD, 
while the screen was mirrored and with the colors looking fine"
   
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1586787/+attachment/4672312/+files/xrandrmint.txt

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1586787

Title:
  Wrong colors on external TV

Status in xorg package in Ubuntu:
  New

Bug description:
  Hi,

  On a Lenovo Thinkpad T420, with an Intel Core i5-2520M CPU and
  integrated graphics, when using a Samsung UE40J5200AW 40in TV with a
  DisplayPort to HDMI adapter and an HDMI cable, the colors are very
  wrong on the TV.

  This happens on a brand new Ubuntu 16.04 installation made from
  scratch, and it does not happen when I boot from a Linux Mint 17.3
  "Rosa" Cinnamon 64-bit live DVD. So same laptop, same adapter, same
  cable, same TV, and the colors are fine on the TV in this case (Mint
  live DVD). Also, when switching the laptop with a Dell running Windows
  8.1 (so the same adapter, cable, and TV are used), the colors are
  again fine.

  I have attached a picture that shows the laptop screen in front of the
  TV screen with the display mirrored. So both screens should look the
  same in the picture. But it looks like only the white color is the
  same, while the rest of the colors are very different.

  Thanks for your help,
  Alin.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  .tmp.unity_support_test.0:
   
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Sun May 29 17:47:11 2016
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo 2nd Generation Core Processor Family Integrated Graphics 
Controller [17aa:21ce]
  InstallationDate: Installed on 2016-05-06 (22 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  MachineType: LENOVO 4236BH1
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-22-generic.efi.signed 
root=/dev/mapper/ubuntu--vg-root ro noprompt persistent quiet splash 
vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/05/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 83ET76WW (1.46 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 4236BH1
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr83ET76WW(1.46):bd07/05/2013:svnLENOVO:pn4236BH1:pvrThinkPadT420:rvnLENOVO:rn4236BH1:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 4236BH1
  dmi.product.version: ThinkPad T420
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.67-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2
  version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.12-1build2
  xserver.bootTime: Sun May 29 17:45:29 2016
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id 738 
   vendor LGD
  xserver.version: 2:1.18.3-1ubuntu2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1586787/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1580852] Re: Xonar DSX AV200 not adjustable sound level

[Www]

wtf?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1580852

Title:
  Xonar DSX AV200 not adjustable sound level

Status in alsa-driver package in Ubuntu:
  New

Bug description:
  sound card asus Xonar DSX AV200
  integrated sound card disable in bios

  tested bug ubuntu 16.04 and kubuntu 16.04 wich update 12.05.2016
  ubuntu 15.10 everything worked correctly

  changing the volume level in the gui, but it will not change

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: plasma-workspace 4:5.5.5.2-0ubuntu1
  ProcVersionSignature: Ubuntu 4.4.0-22.39-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Thu May 12 11:23:28 2016
  EcryptfsInUse: Yes
  ExecutablePath: /usr/bin/plasmashell
  InstallationDate: Installed on 2016-04-24 (17 days ago)
  InstallationMedia: Kubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  ProcEnviron:
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=ru_RU.UTF-8
   SHELL=/bin/bash
  SourcePackage: plasma-workspace
  UpgradeStatus: No upgrade log present (probably fresh install)
  XsessionErrors:
   (process:3737): GLib-CRITICAL **: g_slice_set_config: assertion 
'sys_page_size == 0' failed
   (process:1876): GLib-CRITICAL **: g_slice_set_config: assertion 
'sys_page_size == 0' failed
   (process:4369): GLib-CRITICAL **: g_slice_set_config: assertion 
'sys_page_size == 0' failed
   (process:16310): GLib-CRITICAL **: g_slice_set_config: assertion 
'sys_page_size == 0' failed
   (process:22292): GLib-CRITICAL **: g_slice_set_config: assertion 
'sys_page_size == 0' failed

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1580852/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586787] [NEW] Wrong colors on external TV

[Alin Hanghiuc]

Public bug reported:

Hi,

On a Lenovo Thinkpad T420, with an Intel Core i5-2520M CPU and
integrated graphics, when using a Samsung UE40J5200AW 40in TV with a
DisplayPort to HDMI adapter and an HDMI cable, the colors are very wrong
on the TV.

This happens on a brand new Ubuntu 16.04 installation made from scratch,
and it does not happen when I boot from a Linux Mint 17.3 "Rosa"
Cinnamon 64-bit live DVD. So same laptop, same adapter, same cable, same
TV, and the colors are fine on the TV in this case (Mint live DVD).
Also, when switching the laptop with a Dell running Windows 8.1 (so the
same adapter, cable, and TV are used), the colors are again fine.

I have attached a picture that shows the laptop screen in front of the
TV screen with the display mirrored. So both screens should look the
same in the picture. But it looks like only the white color is the same,
while the rest of the colors are very different.

Thanks for your help,
Alin.

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xorg 1:7.7+13ubuntu3
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
Uname: Linux 4.4.0-22-generic x86_64
.tmp.unity_support_test.0:
 
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
Date: Sun May 29 17:47:11 2016
DistUpgraded: Fresh install
DistroCodename: xenial
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes
GraphicsCard:
 Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
   Subsystem: Lenovo 2nd Generation Core Processor Family Integrated Graphics 
Controller [17aa:21ce]
InstallationDate: Installed on 2016-05-06 (22 days ago)
InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1)
MachineType: LENOVO 4236BH1
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-22-generic.efi.signed 
root=/dev/mapper/ubuntu--vg-root ro noprompt persistent quiet splash 
vt.handoff=7
SourcePackage: xorg
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 07/05/2013
dmi.bios.vendor: LENOVO
dmi.bios.version: 83ET76WW (1.46 )
dmi.board.asset.tag: Not Available
dmi.board.name: 4236BH1
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: 
dmi:bvnLENOVO:bvr83ET76WW(1.46):bd07/05/2013:svnLENOVO:pn4236BH1:pvrThinkPadT420:rvnLENOVO:rn4236BH1:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 4236BH1
dmi.product.version: ThinkPad T420
dmi.sys.vendor: LENOVO
version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.67-1
version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2
version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2
xserver.bootTime: Sun May 29 17:45:29 2016
xserver.configfile: default
xserver.errors:
 
xserver.logfile: /var/log/Xorg.0.log
xserver.outputs:
 product id 738 
 vendor LGD
xserver.version: 2:1.18.3-1ubuntu2

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug compiz-0.9 ubuntu xenial

** Attachment added: "Picture with the laptop screen in front of the TV with 
the screen mirrored"
   
https://bugs.launchpad.net/bugs/1586787/+attachment/4672279/+files/IMG_20160529_172202.jpg

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1586787

Title:
  Wrong colors on external TV

Status in xorg package in Ubuntu:
  New

Bug description:
  Hi,

  On a Lenovo Thinkpad T420, with an Intel Core i5-2520M CPU and
  integrated graphics, when using a Samsung UE40J5200AW 40in TV with a
  DisplayPort to HDMI adapter and an HDMI cable, the colors are very
  wrong on the TV.

  This happens on a brand new Ubuntu 16.04 installation made from
  scratch, and it does not happen when I boot from a Linux Mint 17.3
  "Rosa" Cinnamon 64-bit live DVD. So same laptop, same adapter, same
  cable, same TV, and the colors are fine on the TV in this case (Mint
  live DVD). Also, when switching the laptop with a Dell running Windows
  8.1 (so the same adapter, cable, and TV are used), the colors are
  again fine.

 

[Touch-packages] [Bug 1577724] Re: NM doesn't sets the DNS properly, forces local dnsmasq as a resolver

[Saikrishna Arcot]

If you choose to only get the IP address from DHCP and you don't specify
and DNS servers to use, then there won't be any DNS servers configured
(besides 127.0.1.1).

What will happen is that a DNS request will be sent to 127.0.1.1
(dnsmasq). dnsmasq doesn't have any upstream servers configured, so
unless the IP address for the domain is statically set somewhere in the
configuration file, DNS won't work.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1577724

Title:
  NM doesn't sets the DNS properly, forces local dnsmasq as a resolver

Status in network-manager package in Ubuntu:
  Incomplete

Bug description:
  1. Setup a network with DHCP address, gateway and DNS.
  2. Connect to that network.
  3. Check the resolver configured in /etc/resolv.conf

  Expected result:
  To find "nameserver" set to the DNS addresses provided by the external DHCP 
server

  Actual result:
  "nameserver=127.0.1.1" in any case.

  This related to https://bugs.launchpad.net/bugs/1577720

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: network-manager 1.1.93-0ubuntu4
  ProcVersionSignature: Ubuntu 4.4.0-21.37-lowlatency 4.4.6
  Uname: Linux 4.4.0-21-lowlatency x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Tue May  3 12:42:19 2016
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2016-04-22 (10 days ago)
  InstallationMedia: Kubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  IpRoute:
   default via 192.168.1.1 dev wlxc4e9840ddc04  proto static  metric 600 
   169.254.0.0/16 dev wlxc4e9840ddc04  scope link  metric 1000 
   192.168.1.0/24 dev wlxc4e9840ddc04  proto kernel  scope link  src 
192.168.1.95  metric 600
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-dev:
   DEVICE TYPE  STATE DBUS-PATH 
 CONNECTION  CON-UUID  CON-PATH 
  
   wlxc4e9840ddc04wifi  connected 
/org/freedesktop/NetworkManager/Devices/0  SIGKILL 
2986445c-d935-4b58-b3ca-da614dd4  
/org/freedesktop/NetworkManager/ActiveConnection/5 
   C0:EE:FB:44:15:8A  btdisconnected  
/org/freedesktop/NetworkManager/Devices/3  --  --   
 -- 
   enp3s0 ethernet  unavailable   
/org/freedesktop/NetworkManager/Devices/1  --  --   
 -- 
   lo loopback  unmanaged 
/org/freedesktop/NetworkManager/Devices/2  --  --   
 --
  nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 
2: Error: Object 'nm' is unknown, try 'nmcli help'.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1577724/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586786] [NEW] OptionSelector in Row results in freeze

[Tim Süberkrüb]

Public bug reported:

Using an OptionSelector as child of a Row makes the app freeze if now
row size is defined and there is at least one other element in the row:


Row {
  Item { width: 20; height: 20 }//freeze goes away without this Item
  OptionSelector {
text: "Label"
model: ["Value 1", "Value 2"]
  }
}

** Affects: ubuntu-ui-toolkit (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1586786

Title:
  OptionSelector in Row results in freeze

Status in ubuntu-ui-toolkit package in Ubuntu:
  New

Bug description:
  Using an OptionSelector as child of a Row makes the app freeze if now
  row size is defined and there is at least one other element in the
  row:

  
  Row {
Item { width: 20; height: 20 }//freeze goes away without this Item
OptionSelector {
  text: "Label"
  model: ["Value 1", "Value 2"]
}
  }

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1586786/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1584509] Re: hybrid CDs/DVDs not mounted in xenial

[Karl Lindheimer]

OK, I've tested the proposed fixes, and everything now seems to work as
intended.  The hybrid audio/data disks mount correctly, and other CD-R's
now mount automatically too.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to util-linux in Ubuntu.
https://bugs.launchpad.net/bugs/1584509

Title:
  hybrid CDs/DVDs not mounted in xenial

Status in util-linux package in Ubuntu:
  Fix Released
Status in util-linux source package in Xenial:
  Fix Committed

Bug description:
  * Impact
  some CDs are not listed in the desktop UIs

  * Test case
  under unity7 insert a video DVD in your drive, you should get prompted about 
it and have the device listed in the launcher/nautilus

  * Regression potential
  check that devices keep being correctly listed/mounted

  

  This bug affects both the X64 and X32 bit versions of the latest
  ubuntu 16.04 it does not occur with ubuntu 15.10 or earlier.  The
  problem is when a known good CD-R is placed in the drive, it is not
  mounted automatically.  However, if it is a bootable CD-R and you
  select the boot option of the BIOS it will function normally.

  Also, When a blank CD-R is inserted into the drive, it is mounted
  automatically, but disk creation software reports an erroneous amount
  of free space available.  Such as 247 MB or 512 MB when the disk is a
  700 MB disk.  However, if you proceed to record to the disk, even with
  an ISO image greater than the supposed available capacity, it records
  just fine.

  Other disk types such as DVD, audio, small cd-r work fine.  This only
  seems to affect the larger, full size cd-r's

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.4.0-22-generic 4.4.0-22.40
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  karl   1886 F pulseaudio
   /dev/snd/controlC0:  karl   1886 F pulseaudio
  CurrentDesktop: Unity
  Date: Sun May 22 14:38:13 2016
  GvfsMonitorLog: Monitoring events. Press Ctrl+C to quit.
  HibernationDevice: RESUME=UUID=03cb5141-d254-414a-950b-2235e068035a
  HotplugNewDevices:

  HotplugNewMounts:

  InstallationDate: Installed on 2016-03-09 (73 days ago)
  InstallationMedia: Ubuntu 14.04.4 LTS "Trusty Tahr" - Release amd64 
(20160217.1)
  MachineType: Gateway DX4380G
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic 
root=UUID=da27bf85-d849-43b8-a8f2-8fdac4f37784 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.4.0-22-generic N/A
   linux-backports-modules-4.4.0-22-generic  N/A
   linux-firmware1.157
  SourcePackage: linux
  Symptom: storage
  UdevMonitorLog:
   monitor will print the received events for:
   UDEV - the event which udev sends out after rule processing
  UdisksMonitorLog:
   Monitoring the udisks daemon. Press Ctrl+C to exit.
   14:38:31.725: The udisks-daemon is running (name-owner :1.96).
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 09/04/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P11-A1
  dmi.board.name: DX4380G
  dmi.board.vendor: Gateway
  dmi.board.version: 1.02
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gateway
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP11-A1:bd09/04/2012:svnGateway:pnDX4380G:pvr:rvnGateway:rnDX4380G:rvr1.02:cvnGateway:ct3:cvr:
  dmi.product.name: DX4380G
  dmi.sys.vendor: Gateway

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1584509/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586620] Re: debian/clean: config.log: not found

[jean-christophe manciot]

Thanks a lot for clarifying that.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to openssh in Ubuntu.
https://bugs.launchpad.net/bugs/1586620

Title:
  debian/clean: config.log: not found

Status in openssh package in Ubuntu:
  Invalid

Bug description:
  Ubuntu 16.04 4.4.0-22
  Openssh debian 7.2p2-5

echo 
echo Cleaning
echo 
cd git-openssh
git reset --hard
git clean -fxd :/
git fetch --progress --prune origin

echo ---
echo "Copying Debian control folder in the expected location"
echo ---
rsync -av ../debian .

echo 
echo Building
echo 
dpkg-buildpackage -m"Jean-Christophe Manciot 
"

  ...
  make[1]: Leaving directory 
'/home/actionmystique/Program-Files/Ubuntu/OpenSSH/git-openssh'
 dh_autoreconf_clean
 dh_clean
  /home/actionmystique/Program-Files/Ubuntu/OpenSSH/git-openssh/debian/clean: 
1: /home/actionmystique/Program-Files/Ubuntu/OpenSSH/git-openssh/debian/clean: 
config.log: not found
  ...

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/openssh/+bug/1586620/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1552424] Re: [FFE] NetworkManager 1.2-beta

[Amr Ibrahim]

Oops! iodine is not fix released! It's still 1.1.0.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1552424

Title:
  [FFE] NetworkManager 1.2-beta

Status in network-manager package in Ubuntu:
  Fix Released
Status in network-manager-applet package in Ubuntu:
  Fix Released
Status in network-manager-iodine package in Ubuntu:
  Fix Released
Status in network-manager-openconnect package in Ubuntu:
  Fix Released
Status in network-manager-openvpn package in Ubuntu:
  Fix Released
Status in network-manager-pptp package in Ubuntu:
  Fix Released
Status in network-manager-vpnc package in Ubuntu:
  Fix Released

Bug description:
  We really should update NetworkManager to 1.2 (or some other updated
  stable release) for the LTS, this will allow us to better deal with
  any bugs that might come up post-release.

  This new release will also much improve interop with LXC, which has
  recently been an issue.

  Other FFEs will be opened for NM VPN plugins and for NetworkManager-
  applet.

  
  
  
  NetworkManager-1.2
  Overview of changes since NetworkManager-1.0
  

  This is a new stable release of NetworkManager.  Notable changes
  include:

  * Added an option to enable use of random MAC addresses for Wi-Fi access
  point scanning (defaults to disabled).  Controlled with
  'wifi.mac-address-randomization' property (MAC_ADDRESS_RANDOMIZATION key 
in
  ifcfg files).
  * Wi-Fi scanning now utilizes wpa_supplicant's AP list.
  * Added support for Wi-Fi powersave, configured with POWERSAVE key in ifcfg
  files.
  * Added support for creation of more types of software devices: tun & tap,
  macvlan, vxlan and ip tunnels (ipip, gre, sit, ip6ip6 and ipip6).
  * The software devices (bond, bridge, vlan, team, ...) can now be stacked
  arbitrarily.  The nmcli interface for creating master-slave relationships
  has been significantly improved by the use of 'master' argument to
  all link types.
  * RFC7217 stable privacy addressing is now used by default to protect from
  address-based host tracking. The IPv6 addressing mode is configured with
  IPV6_ADDR_GEN_MODE key in ifcfg files.
  * Improved route management code to avoid clashes between conflicting
  routes in multiple connections.
  * Refactored platform code resulting in more robust interface to platform,
  less overhead and reduced memory footprint.
  * Improved interoperability with other network management tools.  The
  externally created software devices are not managed until they're
  activated.
  * The Device instances now exist for all software connections and the platform
  devices are now only created when the device is activated.  This makes it
  possible for connections with device of same name not to clash unless
  they're activated concurrently.  The links are now not unnecessarily 
present
  unless the connection is active, avoiding pollution of the link namespace.
  * NetworkManager now correctly manages connectivity in namespace-based
  containers such as LXC and Docker.
  * Support for configuring ethernet Wake-On-Lan has been added.
  * Added LLDP listener functionality and related CLI client commands. Enabled 
via
  LLDP option in ifcfg files.
  * CLI secret agent has been extended with support for VPN secrets.
  * The command line client now utilizes colors for its output.
  * The command line client now sorts the devices and properties for better
  clarity.
  * Numerous improvements to Bash command completion for nmcli.
  * NetworkManager relies on less external libraries.  The use of dbus-glib
  has been replaced with gio's native D-Bus support and libnl-route is no
  longer used.
  * Dependency on avahi-autoipd has been dropped.  Native IPv4 link-local
  addressing configuration based on systemd network library is now used
  instead.
  * Hostname is now managed via systemd-hostnamed on systemd-based systems.
  * Management of resolv.conf management can be changed at runtime, private
  resolv.conf is always written in /run.
  * NetworkManager can now write DNS options to resolv.conf.
  * Updated version of systemd network library used for internal DHCP and
  IPv4 link-local support.
  * Support for event logging via audit subsystem has been added.
  * Support for native logging via systemd-journald has been added taking
  advantage of its structured logging.
  * Live reconfiguration of IP configuration after changing the settings without
  reactivation of the device with "nmcli device reapply" command and via
  D-Bus API.
  * The API for VPN plugins now supports multiple simultaneous connections.
  Most popular VPN plugins have been updated to support this functionality.
  * The libnm library now 

[Touch-packages] [Bug 1552424] Re: [FFE] NetworkManager 1.2-beta

[Amr Ibrahim]

Fixed in yakkety.

** Changed in: network-manager (Ubuntu)
   Status: Triaged => Fix Released

** Changed in: network-manager-applet (Ubuntu)
   Status: Triaged => Fix Released

** Changed in: network-manager-openconnect (Ubuntu)
   Status: Triaged => Fix Released

** Changed in: network-manager-openvpn (Ubuntu)
   Status: Triaged => Fix Released

** Changed in: network-manager-pptp (Ubuntu)
   Status: Triaged => Fix Released

** Changed in: network-manager-vpnc (Ubuntu)
   Status: Triaged => Fix Released

** Changed in: network-manager-iodine (Ubuntu)
   Status: Triaged => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1552424

Title:
  [FFE] NetworkManager 1.2-beta

Status in network-manager package in Ubuntu:
  Fix Released
Status in network-manager-applet package in Ubuntu:
  Fix Released
Status in network-manager-iodine package in Ubuntu:
  Fix Released
Status in network-manager-openconnect package in Ubuntu:
  Fix Released
Status in network-manager-openvpn package in Ubuntu:
  Fix Released
Status in network-manager-pptp package in Ubuntu:
  Fix Released
Status in network-manager-vpnc package in Ubuntu:
  Fix Released

Bug description:
  We really should update NetworkManager to 1.2 (or some other updated
  stable release) for the LTS, this will allow us to better deal with
  any bugs that might come up post-release.

  This new release will also much improve interop with LXC, which has
  recently been an issue.

  Other FFEs will be opened for NM VPN plugins and for NetworkManager-
  applet.

  
  
  
  NetworkManager-1.2
  Overview of changes since NetworkManager-1.0
  

  This is a new stable release of NetworkManager.  Notable changes
  include:

  * Added an option to enable use of random MAC addresses for Wi-Fi access
  point scanning (defaults to disabled).  Controlled with
  'wifi.mac-address-randomization' property (MAC_ADDRESS_RANDOMIZATION key 
in
  ifcfg files).
  * Wi-Fi scanning now utilizes wpa_supplicant's AP list.
  * Added support for Wi-Fi powersave, configured with POWERSAVE key in ifcfg
  files.
  * Added support for creation of more types of software devices: tun & tap,
  macvlan, vxlan and ip tunnels (ipip, gre, sit, ip6ip6 and ipip6).
  * The software devices (bond, bridge, vlan, team, ...) can now be stacked
  arbitrarily.  The nmcli interface for creating master-slave relationships
  has been significantly improved by the use of 'master' argument to
  all link types.
  * RFC7217 stable privacy addressing is now used by default to protect from
  address-based host tracking. The IPv6 addressing mode is configured with
  IPV6_ADDR_GEN_MODE key in ifcfg files.
  * Improved route management code to avoid clashes between conflicting
  routes in multiple connections.
  * Refactored platform code resulting in more robust interface to platform,
  less overhead and reduced memory footprint.
  * Improved interoperability with other network management tools.  The
  externally created software devices are not managed until they're
  activated.
  * The Device instances now exist for all software connections and the platform
  devices are now only created when the device is activated.  This makes it
  possible for connections with device of same name not to clash unless
  they're activated concurrently.  The links are now not unnecessarily 
present
  unless the connection is active, avoiding pollution of the link namespace.
  * NetworkManager now correctly manages connectivity in namespace-based
  containers such as LXC and Docker.
  * Support for configuring ethernet Wake-On-Lan has been added.
  * Added LLDP listener functionality and related CLI client commands. Enabled 
via
  LLDP option in ifcfg files.
  * CLI secret agent has been extended with support for VPN secrets.
  * The command line client now utilizes colors for its output.
  * The command line client now sorts the devices and properties for better
  clarity.
  * Numerous improvements to Bash command completion for nmcli.
  * NetworkManager relies on less external libraries.  The use of dbus-glib
  has been replaced with gio's native D-Bus support and libnl-route is no
  longer used.
  * Dependency on avahi-autoipd has been dropped.  Native IPv4 link-local
  addressing configuration based on systemd network library is now used
  instead.
  * Hostname is now managed via systemd-hostnamed on systemd-based systems.
  * Management of resolv.conf management can be changed at runtime, private
  resolv.conf is always written in /run.
  * NetworkManager can now write DNS options to resolv.conf.
  * Updated version of systemd network library used for internal DHCP and

[Touch-packages] [Bug 1577724] Re: NM doesn't sets the DNS properly, forces local dnsmasq as a resolver

[Uqbar]

What about when I choose to only get the address from DHCP and not the DNS?
Is tcpdump (and the likes) the only way to know which DNSes have been 
configured?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1577724

Title:
  NM doesn't sets the DNS properly, forces local dnsmasq as a resolver

Status in network-manager package in Ubuntu:
  Incomplete

Bug description:
  1. Setup a network with DHCP address, gateway and DNS.
  2. Connect to that network.
  3. Check the resolver configured in /etc/resolv.conf

  Expected result:
  To find "nameserver" set to the DNS addresses provided by the external DHCP 
server

  Actual result:
  "nameserver=127.0.1.1" in any case.

  This related to https://bugs.launchpad.net/bugs/1577720

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: network-manager 1.1.93-0ubuntu4
  ProcVersionSignature: Ubuntu 4.4.0-21.37-lowlatency 4.4.6
  Uname: Linux 4.4.0-21-lowlatency x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Tue May  3 12:42:19 2016
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2016-04-22 (10 days ago)
  InstallationMedia: Kubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  IpRoute:
   default via 192.168.1.1 dev wlxc4e9840ddc04  proto static  metric 600 
   169.254.0.0/16 dev wlxc4e9840ddc04  scope link  metric 1000 
   192.168.1.0/24 dev wlxc4e9840ddc04  proto kernel  scope link  src 
192.168.1.95  metric 600
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-dev:
   DEVICE TYPE  STATE DBUS-PATH 
 CONNECTION  CON-UUID  CON-PATH 
  
   wlxc4e9840ddc04wifi  connected 
/org/freedesktop/NetworkManager/Devices/0  SIGKILL 
2986445c-d935-4b58-b3ca-da614dd4  
/org/freedesktop/NetworkManager/ActiveConnection/5 
   C0:EE:FB:44:15:8A  btdisconnected  
/org/freedesktop/NetworkManager/Devices/3  --  --   
 -- 
   enp3s0 ethernet  unavailable   
/org/freedesktop/NetworkManager/Devices/1  --  --   
 -- 
   lo loopback  unmanaged 
/org/freedesktop/NetworkManager/Devices/2  --  --   
 --
  nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 
2: Error: Object 'nm' is unknown, try 'nmcli help'.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1577724/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1574079] Re: USB audio device is not recognized after startup in 16.04

[Mario Limonciello]

** No longer affects: alsa-driver (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1574079

Title:
  USB audio device is not recognized after startup in 16.04

Status in fwupd package in Ubuntu:
  Confirmed

Bug description:
  Hi @all,

  I used the same USB audio device in all previous Ubuntu versions
  (Focusrite Scarlet 2i2). It is supposed to be class compliant and
  works an all distros flawless (even RPI2 and OSMC). After upgrading
  from 15.10 to 16.04 it stopped to work: after start-up it does not
  show up as an audio device at all (also not recognized by aplay -l). I
  can workaround this by unplugging it and plugging it in again after
  Ubuntu booted up (strangely 2 times unplug/re-plug). After 2nd time
  plugging it in again it shows up and works great without any further
  issues until next restart.

  Maybe worth to note that I recognized today that fwupd uses
  continuously 100% CPU load, so I just killed it today. My Hardware
  (Main-board/CPU) is a bit older (Intel E8400), so could probably be
  some compatibility issue...

  regards,
  Tobias

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu5
  ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6
  Uname: Linux 4.4.0-21-generic i686
  NonfreeKernelModules: nvidia_modeset nvidia
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/pcmC1D0p:   tobias 1553 F...m pulseaudio
   /dev/snd/controlC1:  tobias 1553 F pulseaudio
   /dev/snd/controlC0:  tobias 1553 F pulseaudio
   /dev/snd/controlC2:  tobias 1553 F pulseaudio
  CurrentDesktop: Unity
  Date: Sat Apr 23 20:09:04 2016
  InstallationDate: Installed on 2015-09-19 (217 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release i386 (20150422)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  UpgradeStatus: Upgraded to xenial on 2016-04-22 (0 days ago)
  dmi.bios.date: 09/30/2008
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1238
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: P5B-Deluxe
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr1238:bd09/30/2008:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5B-Deluxe:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/fwupd/+bug/1574079/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1584072] Re: package lib32z1-dev (not installed) failed to install/upgrade: trying to overwrite '/usr/include/i386-linux-gnu/zconf.h', which is also in package zlib1g-dev:i386 1:

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: zlib (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to zlib in Ubuntu.
https://bugs.launchpad.net/bugs/1584072

Title:
  package lib32z1-dev (not installed) failed to install/upgrade: trying
  to overwrite '/usr/include/i386-linux-gnu/zconf.h', which is also in
  package zlib1g-dev:i386 1:1.2.8.dfsg-2ubuntu4

Status in zlib package in Ubuntu:
  Confirmed

Bug description:
  Just trying to install the tools to build the Android Open Source
  Project. Nothing special to note, I just ran the command that is
  recommended on the AOSP website.

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: lib32z1-dev (not installed)
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  Date: Fri May 20 10:05:35 2016
  ErrorMessage: trying to overwrite '/usr/include/i386-linux-gnu/zconf.h', 
which is also in package zlib1g-dev:i386 1:1.2.8.dfsg-2ubuntu4
  InstallationDate: Installed on 2016-05-19 (0 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.1
   apt  1.2.10ubuntu1
  SourcePackage: zlib
  Title: package lib32z1-dev (not installed) failed to install/upgrade: trying 
to overwrite '/usr/include/i386-linux-gnu/zconf.h', which is also in package 
zlib1g-dev:i386 1:1.2.8.dfsg-2ubuntu4
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/zlib/+bug/1584072/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586771] [NEW] unable to On wifi (Air plane mode always ON) in ubuntu gnome 16.04.

[Ajay]

Public bug reported:

Previously Wifi was in working condition By adding extra packages from
software updates -> Additional Drivers. But now I can not able to
connect with wifi. It only shows in Air Plane mode.

I am using Laptop Thinkpad T520 
OS = ubuntu gnome 16.04 
Network card = Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] 
(Centrino Advanced-N 6205 AGN)
Kernel version = 4.4.0-22-generic #40-Ubuntu SMP Thu May 12 22:03:46 UTC 2016 
x86_64 x86_64 x86_64 GNU/Linux

Thank you.

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: network-manager 1.1.93-0ubuntu4
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
Uname: Linux 4.4.0-22-generic x86_64
NonfreeKernelModules: wl
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
CurrentDesktop: GNOME
Date: Sun May 29 18:26:15 2016
IfupdownConfig:
 # interfaces(5) file used by ifup(8) and ifdown(8)
 auto lo
 iface lo inet loopback
InstallationDate: Installed on 2016-04-16 (42 days ago)
InstallationMedia: Ubuntu-GNOME 15.10 "Wily Werewolf" - Release amd64 (20151021)
IpRoute:
 default via 192.168.1.1 dev enp0s25  proto static  metric 100 
 169.254.0.0/16 dev enp0s25  scope link  metric 1000 
 192.168.1.0/24 dev enp0s25  proto kernel  scope link  src 192.168.1.105  
metric 100
NetworkManager.state:
 [main]
 NetworkingEnabled=true
 WirelessEnabled=true
 WWANEnabled=false
SourcePackage: network-manager
UpgradeStatus: No upgrade log present (probably fresh install)
nmcli-dev:
 DEVICE   TYPE  STATEDBUS-PATH  
CONNECTION  CON-UUID  CON-PATH  
 
 enp0s25  ethernet  connected/org/freedesktop/NetworkManager/Devices/1  
enp0s25 dacd31ad-8949-42a6-8115-142800960f1c  
/org/freedesktop/NetworkManager/ActiveConnection/0 
 wlp3s0   wifi  unavailable  /org/freedesktop/NetworkManager/Devices/0  --  
----
 
 lo   loopback  unmanaged/org/freedesktop/NetworkManager/Devices/2  --  
----
nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: 
Error: Object 'nm' is unknown, try 'nmcli help'.

** Affects: network-manager (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug xenial

** Summary changed:

- Main issue is I am unable to start wifi in ubuntu gnome 16.04. 
+ unable to On wifi (Air plane mode always ON) in ubuntu gnome 16.04.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1586771

Title:
  unable to On wifi (Air plane mode always ON) in ubuntu gnome 16.04.

Status in network-manager package in Ubuntu:
  New

Bug description:
  Previously Wifi was in working condition By adding extra packages from
  software updates -> Additional Drivers. But now I can not able to
  connect with wifi. It only shows in Air Plane mode.

  I am using Laptop Thinkpad T520 
  OS = ubuntu gnome 16.04 
  Network card = Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] 
(Centrino Advanced-N 6205 AGN)
  Kernel version = 4.4.0-22-generic #40-Ubuntu SMP Thu May 12 22:03:46 UTC 2016 
x86_64 x86_64 x86_64 GNU/Linux

  Thank you.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: network-manager 1.1.93-0ubuntu4
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Sun May 29 18:26:15 2016
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2016-04-16 (42 days ago)
  InstallationMedia: Ubuntu-GNOME 15.10 "Wily Werewolf" - Release amd64 
(20151021)
  IpRoute:
   default via 192.168.1.1 dev enp0s25  proto static  metric 100 
   169.254.0.0/16 dev enp0s25  scope link  metric 1000 
   192.168.1.0/24 dev enp0s25  proto kernel  scope link  src 192.168.1.105  
metric 100
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=false
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-dev:
   DEVICE   TYPE  STATEDBUS-PATH  
CONNECTION  CON-UUID  CON-PATH  
 
   enp0s25  ethernet  connected/org/freedesktop/NetworkManager/Devices/1  
enp0s25 dacd31ad-8949-42a6-8115-142800960f1c  
/org/freedesktop/NetworkManager/ActiveConnection/0 
   wlp3s0   wifi  unavailable  /org/freedesktop/NetworkManager/Devices/0  
--  ----
 
   lo   loopback  unmanaged

[Touch-packages] [Bug 1577724] Re: NM doesn't sets the DNS properly, forces local dnsmasq as a resolver

[Saikrishna Arcot]

Alternatively, you can create a file (choose any file name) in
/etc/NetworkManager/conf.d/ with the following in it:

[main]
dns=default

This should have NetworkManager not use dnsmasq and update resolv.conf.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1577724

Title:
  NM doesn't sets the DNS properly, forces local dnsmasq as a resolver

Status in network-manager package in Ubuntu:
  Incomplete

Bug description:
  1. Setup a network with DHCP address, gateway and DNS.
  2. Connect to that network.
  3. Check the resolver configured in /etc/resolv.conf

  Expected result:
  To find "nameserver" set to the DNS addresses provided by the external DHCP 
server

  Actual result:
  "nameserver=127.0.1.1" in any case.

  This related to https://bugs.launchpad.net/bugs/1577720

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: network-manager 1.1.93-0ubuntu4
  ProcVersionSignature: Ubuntu 4.4.0-21.37-lowlatency 4.4.6
  Uname: Linux 4.4.0-21-lowlatency x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Tue May  3 12:42:19 2016
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2016-04-22 (10 days ago)
  InstallationMedia: Kubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  IpRoute:
   default via 192.168.1.1 dev wlxc4e9840ddc04  proto static  metric 600 
   169.254.0.0/16 dev wlxc4e9840ddc04  scope link  metric 1000 
   192.168.1.0/24 dev wlxc4e9840ddc04  proto kernel  scope link  src 
192.168.1.95  metric 600
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-dev:
   DEVICE TYPE  STATE DBUS-PATH 
 CONNECTION  CON-UUID  CON-PATH 
  
   wlxc4e9840ddc04wifi  connected 
/org/freedesktop/NetworkManager/Devices/0  SIGKILL 
2986445c-d935-4b58-b3ca-da614dd4  
/org/freedesktop/NetworkManager/ActiveConnection/5 
   C0:EE:FB:44:15:8A  btdisconnected  
/org/freedesktop/NetworkManager/Devices/3  --  --   
 -- 
   enp3s0 ethernet  unavailable   
/org/freedesktop/NetworkManager/Devices/1  --  --   
 -- 
   lo loopback  unmanaged 
/org/freedesktop/NetworkManager/Devices/2  --  --   
 --
  nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 
2: Error: Object 'nm' is unknown, try 'nmcli help'.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1577724/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1577724] Re: NM doesn't sets the DNS properly, forces local dnsmasq as a resolver

[Saikrishna Arcot]

I believe this is by design. NetworkManager starts up a dnsmasq instance
that then uses the DNS servers provided by the DHCP server to resolve
queries. This is so that dnsmasq acts as a DNS caching application.

If you run tcpdump or wireshark to log DNS queries made, you should see
that the DNS servers provided by the DHCP server are used.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1577724

Title:
  NM doesn't sets the DNS properly, forces local dnsmasq as a resolver

Status in network-manager package in Ubuntu:
  Incomplete

Bug description:
  1. Setup a network with DHCP address, gateway and DNS.
  2. Connect to that network.
  3. Check the resolver configured in /etc/resolv.conf

  Expected result:
  To find "nameserver" set to the DNS addresses provided by the external DHCP 
server

  Actual result:
  "nameserver=127.0.1.1" in any case.

  This related to https://bugs.launchpad.net/bugs/1577720

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: network-manager 1.1.93-0ubuntu4
  ProcVersionSignature: Ubuntu 4.4.0-21.37-lowlatency 4.4.6
  Uname: Linux 4.4.0-21-lowlatency x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Tue May  3 12:42:19 2016
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2016-04-22 (10 days ago)
  InstallationMedia: Kubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  IpRoute:
   default via 192.168.1.1 dev wlxc4e9840ddc04  proto static  metric 600 
   169.254.0.0/16 dev wlxc4e9840ddc04  scope link  metric 1000 
   192.168.1.0/24 dev wlxc4e9840ddc04  proto kernel  scope link  src 
192.168.1.95  metric 600
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-dev:
   DEVICE TYPE  STATE DBUS-PATH 
 CONNECTION  CON-UUID  CON-PATH 
  
   wlxc4e9840ddc04wifi  connected 
/org/freedesktop/NetworkManager/Devices/0  SIGKILL 
2986445c-d935-4b58-b3ca-da614dd4  
/org/freedesktop/NetworkManager/ActiveConnection/5 
   C0:EE:FB:44:15:8A  btdisconnected  
/org/freedesktop/NetworkManager/Devices/3  --  --   
 -- 
   enp3s0 ethernet  unavailable   
/org/freedesktop/NetworkManager/Devices/1  --  --   
 -- 
   lo loopback  unmanaged 
/org/freedesktop/NetworkManager/Devices/2  --  --   
 --
  nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 
2: Error: Object 'nm' is unknown, try 'nmcli help'.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1577724/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586620] Re: debian/clean: config.log: not found

[Colin Watson]

... and, furthermore, you will find a tag for each Debian release in
that git repository.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to openssh in Ubuntu.
https://bugs.launchpad.net/bugs/1586620

Title:
  debian/clean: config.log: not found

Status in openssh package in Ubuntu:
  Invalid

Bug description:
  Ubuntu 16.04 4.4.0-22
  Openssh debian 7.2p2-5

echo 
echo Cleaning
echo 
cd git-openssh
git reset --hard
git clean -fxd :/
git fetch --progress --prune origin

echo ---
echo "Copying Debian control folder in the expected location"
echo ---
rsync -av ../debian .

echo 
echo Building
echo 
dpkg-buildpackage -m"Jean-Christophe Manciot 
"

  ...
  make[1]: Leaving directory 
'/home/actionmystique/Program-Files/Ubuntu/OpenSSH/git-openssh'
 dh_autoreconf_clean
 dh_clean
  /home/actionmystique/Program-Files/Ubuntu/OpenSSH/git-openssh/debian/clean: 
1: /home/actionmystique/Program-Files/Ubuntu/OpenSSH/git-openssh/debian/clean: 
config.log: not found
  ...

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/openssh/+bug/1586620/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586528] Re: Avahi-daemon withdraws address record

[Trent Lloyd]

Avahi is not the one actively withdrawing the address, this log message
is a reaction to the address record being removed from the system.. it
withdraws the mDNS "record" for this address.

Most likely theory for this is that DHCP is deciding to drop the address
for some reason (lease expired and couldn't renew) or something else
like that.  In any case issue will be Network Manager related more than
Avahi.

** Also affects: network-manager (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: avahi (Ubuntu)
   Status: New => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to avahi in Ubuntu.
https://bugs.launchpad.net/bugs/1586528

Title:
  Avahi-daemon withdraws address record

Status in avahi package in Ubuntu:
  Invalid
Status in network-manager package in Ubuntu:
  New

Bug description:
  For some reason, if I leave my Ubuntu VM up for a prolonged period of
  time the machine will lose connection to the network.  ip addr shows
  that the nic port no longer has an address and an examination of the
  syslog shows this:

  May 27 14:19:38 matt-VirtualBox avahi-daemon[590]: Withdrawing address record 
for 10.0.2.15 on enp0s3.
  May 27 14:19:38 matt-VirtualBox avahi-daemon[590]: Leaving mDNS multicast 
group on interface enp0s3.IPv4 with address 10.0.2.15.
  May 27 14:19:38 matt-VirtualBox avahi-daemon[590]: Interface enp0s3.IPv4 no 
longer relevant for mDNS.

  
  for no known reason.

  The only reliable way to get the network to come back (that I have
  found) is a full reboot.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: avahi-daemon 0.6.32~rc+dfsg-1ubuntu2
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Fri May 27 15:11:34 2016
  InstallationDate: Installed on 2015-10-22 (218 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  SourcePackage: avahi
  UpgradeStatus: Upgraded to xenial on 2016-03-30 (58 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/avahi/+bug/1586528/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586620] Re: debian/clean: config.log: not found

[Colin Watson]

Regarding debian/clean, I didn't say you necessarily did it
intentionally or manually.  You could at least check.  The symptoms you
report are consistent with debian/clean being incorrectly executable.

Regarding the version number, I do!  All of those versions are based
directly on the upstream 7.2p2 release (git tag V_7_2_P2), not on any
newer upstream commit.  7.2p3~gitwhatever would be totally incorrect and
inappropriate.  Yes, some upstream patches are cherry-picked, but those
are all in debian/patches.  You can see the git history directly by
checking out https://anonscm.debian.org/git/pkg-ssh/openssh.git (the
value of Vcs-Git in debian/control).

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to openssh in Ubuntu.
https://bugs.launchpad.net/bugs/1586620

Title:
  debian/clean: config.log: not found

Status in openssh package in Ubuntu:
  Invalid

Bug description:
  Ubuntu 16.04 4.4.0-22
  Openssh debian 7.2p2-5

echo 
echo Cleaning
echo 
cd git-openssh
git reset --hard
git clean -fxd :/
git fetch --progress --prune origin

echo ---
echo "Copying Debian control folder in the expected location"
echo ---
rsync -av ../debian .

echo 
echo Building
echo 
dpkg-buildpackage -m"Jean-Christophe Manciot 
"

  ...
  make[1]: Leaving directory 
'/home/actionmystique/Program-Files/Ubuntu/OpenSSH/git-openssh'
 dh_autoreconf_clean
 dh_clean
  /home/actionmystique/Program-Files/Ubuntu/OpenSSH/git-openssh/debian/clean: 
1: /home/actionmystique/Program-Files/Ubuntu/OpenSSH/git-openssh/debian/clean: 
config.log: not found
  ...

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/openssh/+bug/1586620/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1584853] Re: Shotwell crashes on startup / Crash in exiv2 due to assertion when setting rating on jpg with a Casio makernote

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: exiv2 (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to exiv2 in Ubuntu.
https://bugs.launchpad.net/bugs/1584853

Title:
  Shotwell crashes on startup / Crash in exiv2 due to assertion when
  setting rating on jpg with a Casio makernote

Status in exiv2 package in Ubuntu:
  Confirmed
Status in exiv2 package in Debian:
  Fix Released

Bug description:
  Starting from the command line, this can be seen:

  shotwell: tiffcomposite.cpp:749: virtual Exiv2::Internal::TiffComponent* 
Exiv2::Internal::TiffMnEntry::doAddPath(uint16_t, Exiv2::Internal::TiffPath&, 
Exiv2::Internal::TiffComponent*, Exiv2::Internal::TiffComponent::AutoPtr): 
Assertion `mn_' failed.
  Aborted (core dumped)

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: shotwell 0.22.0+git20160108.r1.f2fb1f7-0ubuntu1
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon May 23 08:48:32 2016
  InstallationDate: Installed on 2015-09-20 (245 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  SourcePackage: shotwell
  UpgradeStatus: Upgraded to xenial on 2016-04-21 (31 days ago)
  shotwell.log:
   L 24280 2016-05-23 08:46:56 [MSG] main.vala:385: Shotwell Photo Manager 
0.22.0
   L 24280 2016-05-23 08:46:56 [MSG] main.vala:43: Verifying database ...

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/exiv2/+bug/1584853/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586764] [NEW] Screen corruption on Asus Zenbook UX31E occurring after some time or after hibernation

[datenhalde]

Public bug reported:

The problem occurred after upgrade to Xenial. After a (re)boot
everything is normal but after using the machine for some time or
especially after wakeup from hibernation (e.g. opening display) the
lower part of the screen (below the position of the mouse pointer)
starts to flicker, especially when moving the mouse. I'm experiencing
this on an Asus Zenbook UX31E, using Intel i915 video.

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xorg 1:7.7+13ubuntu3
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
Uname: Linux 4.4.0-22-generic x86_64
.tmp.unity_support_test.0:
 
ApportVersion: 2.20.1-0ubuntu2
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: None
CurrentDesktop: GNOME
Date: Sun May 29 13:46:06 2016
DistUpgraded: 2016-04-28 19:48:07,277 DEBUG Running PostInstallScript: 
'./xorg_fix_proprietary.py'
DistroCodename: xenial
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes
GraphicsCard:
 Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
   Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family 
Integrated Graphics Controller [1043:1427]
InstallationDate: Installed on 2015-12-30 (150 days ago)
InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
MachineType: ASUSTeK Computer Inc. UX31E
ProcEnviron:
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=de_DE.UTF-8
 SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic 
root=UUID=d89498dd-61fb-4eee-835a-5fc3cfc9f91a ro quiet splash vt.handoff=7
SourcePackage: xorg
Symptom: display
UpgradeStatus: Upgraded to xenial on 2016-04-28 (30 days ago)
dmi.bios.date: 11/21/2012
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: UX31E.215
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: UX31E
dmi.board.vendor: ASUSTeK Computer Inc.
dmi.board.version: 1.0
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK Computer Inc.
dmi.chassis.version: 1.0
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrUX31E.215:bd11/21/2012:svnASUSTeKComputerInc.:pnUX31E:pvr1.0:rvnASUSTeKComputerInc.:rnUX31E:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0:
dmi.product.name: UX31E
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK Computer Inc.
version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.67-1
version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2
version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2
xserver.bootTime: Mon Apr  4 07:20:36 2016
xserver.configfile: default
xserver.errors:
 
xserver.logfile: /var/log/Xorg.0.log
xserver.outputs:
 product id6107 
 vendor COR
xserver.version: 2:1.17.2-1ubuntu9.1

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug corruption ubuntu wayland-session xenial

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1586764

Title:
  Screen corruption on Asus Zenbook UX31E occurring after some time or
  after hibernation

Status in xorg package in Ubuntu:
  New

Bug description:
  The problem occurred after upgrade to Xenial. After a (re)boot
  everything is normal but after using the machine for some time or
  especially after wakeup from hibernation (e.g. opening display) the
  lower part of the screen (below the position of the mouse pointer)
  starts to flicker, especially when moving the mouse. I'm experiencing
  this on an Asus Zenbook UX31E, using Intel i915 video.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  .tmp.unity_support_test.0:
   
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  CurrentDesktop: GNOME
  Date: Sun May 29 13:46:06 2016
  DistUpgraded: 2016-04-28 19:48:07,277 DEBUG Running PostInstallScript: 
'./xorg_fix_proprietary.py'
  DistroCodename: xenial
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0116] (rev 09) (prog-if 00 [VGA 

[Touch-packages] [Bug 1216600] Re: rythmbox freezes randomly when playing song

[Merlijn Sebrechts]

Haven't stumbled upon this bug anymore, so marking this as fix released.

** Changed in: gstreamer0.10 (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gstreamer0.10 in Ubuntu.
https://bugs.launchpad.net/bugs/1216600

Title:
  rythmbox freezes randomly when playing song

Status in gstreamer0.10 package in Ubuntu:
  Fix Released

Bug description:
  While playing a .wav song, rythmbox suddenly skips over some parts and
  then freezes. If i close rythmbox, open it again and play the same
  song, it plays it until the end, and then stops.

  I tried it one more time; now plays normally and at the end, it goes
  to the next song, but it still shows like it is playing the first
  song.

  I know this is a very strange bug report, if you need more/more clear
  information, ask me.


  
  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: libgstreamer0.10-0 0.10.36-1ubuntu2
  ProcVersionSignature: Ubuntu 3.8.0-29.42-generic 3.8.13.5
  Uname: Linux 3.8.0-29-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  Date: Sun Aug 25 17:34:25 2013
  EcryptfsInUse: Yes
  ExecutablePath: /usr/bin/rhythmbox
  InstallationDate: Installed on 2013-05-31 (85 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  MarkForUpload: True
  SourcePackage: gstreamer0.10
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gstreamer0.10/+bug/1216600/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1452760] Re: Unlocking takes up to 30 seconds

[Merlijn Sebrechts]

Haven't experienced this for a long time, so marking this as fix
released.


** Changed in: unity8 (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1452760

Title:
  Unlocking takes up to 30 seconds

Status in unity8 package in Ubuntu:
  Fix Released

Bug description:
  I have this problem a lot on the BQ phone. Please let me know what
  information you need from me next time this happens.

  When I press the power button to come back from sleep, it can take up
  to 20 seconds before the screen appears. After that, unlocking the
  phone also takes a lot of time, about 5 seconds. Opening the drawer
  happens immediately... Most of the time there is only one or two apps
  open. The browser has always been open when I had this.

  Please let me know what information I need to get next time this
  happens!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1452760/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586755] [NEW] package apport 2.20.1-0ubuntu2.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[Tommi Joutsiniemi]

Public bug reported:

I just did a package updatea manually (typed "updater" into launcher).

ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: apport 2.20.1-0ubuntu2.1
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
Uname: Linux 4.4.0-22-generic x86_64
ApportLog:
 
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
CrashReports:
 644:0:116:0:2016-05-28 11:40:34.796151866 +0300:2016-05-28 11:40:34.796151866 
+0300:/var/crash/udev.0.upload
 600:0:116:491414:2016-05-29 13:45:02.161813020 +0300:2016-05-29 
13:45:03.161813020 +0300:/var/crash/apport.0.crash
 600:109:116:0:2016-05-28 11:40:40.052191695 +0300:2016-05-28 
11:40:40.052191695 +0300:/var/crash/udev.0.uploaded
 640:0:116:810280:2016-05-28 11:40:30.160125494 +0300:2016-05-28 
11:40:31.160125494 +0300:/var/crash/udev.0.crash
Date: Sun May 29 13:45:03 2016
ErrorMessage: subprocess installed post-installation script returned error exit 
status 1
InstallationDate: Installed on 2016-05-12 (16 days ago)
InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1)
PackageArchitecture: all
RelatedPackageVersions:
 dpkg 1.18.4ubuntu1.1
 apt  1.2.10ubuntu1
SourcePackage: apport
Title: package apport 2.20.1-0ubuntu2.1 failed to install/upgrade: subprocess 
installed post-installation script returned error exit status 1
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: apport (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package need-duplicate-check xenial

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1586755

Title:
  package apport 2.20.1-0ubuntu2.1 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 1

Status in apport package in Ubuntu:
  New

Bug description:
  I just did a package updatea manually (typed "updater" into launcher).

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: apport 2.20.1-0ubuntu2.1
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  ApportLog:
   
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CrashReports:
   644:0:116:0:2016-05-28 11:40:34.796151866 +0300:2016-05-28 
11:40:34.796151866 +0300:/var/crash/udev.0.upload
   600:0:116:491414:2016-05-29 13:45:02.161813020 +0300:2016-05-29 
13:45:03.161813020 +0300:/var/crash/apport.0.crash
   600:109:116:0:2016-05-28 11:40:40.052191695 +0300:2016-05-28 
11:40:40.052191695 +0300:/var/crash/udev.0.uploaded
   640:0:116:810280:2016-05-28 11:40:30.160125494 +0300:2016-05-28 
11:40:31.160125494 +0300:/var/crash/udev.0.crash
  Date: Sun May 29 13:45:03 2016
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 1
  InstallationDate: Installed on 2016-05-12 (16 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  PackageArchitecture: all
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.1
   apt  1.2.10ubuntu1
  SourcePackage: apport
  Title: package apport 2.20.1-0ubuntu2.1 failed to install/upgrade: subprocess 
installed post-installation script returned error exit status 1
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1586755/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1586641] Re: PCI/internal sound card not detected

[mart1oeil]

The sound card is a Realtek ALC3235 cf :
http://www.dell.com/support/manuals/us/en/19/latitude-e7470-ultrabook/Late_E7470_OM
/Audio-specifications?guid=GUID-EE1BF4E5-7FF1-4415-A32D-
B8FE54B2D639=en-us

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1586641

Title:
  PCI/internal sound card not detected

Status in alsa-driver package in Ubuntu:
  New

Bug description:
  My sound card is not even detected and alsamixer do nothing.

  I tried oem-audio-hda-daily-lts-xenial-dkms -
  0.201605271732~ubuntu16.04.1 https://code.launchpad.net/~ubuntu-audio-
  dev/+archive/ubuntu/alsa-daily/+packages like it was described here
  https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS but it didn't worked.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu5
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Sat May 28 15:20:10 2016
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2016-05-27 (1 days ago)
  InstallationMedia: Ubuntu-GNOME 16.04 LTS "Xenial Xerus" - Release amd64 
(20160421)
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Title: PCI/internal sound card not detected
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/14/2016
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 1.3.0
  dmi.board.name: 0T6HHJ
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 9
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvr1.3.0:bd02/14/2016:svnDellInc.:pnLatitudeE7470:pvr:rvnDellInc.:rn0T6HHJ:rvrA00:cvnDellInc.:ct9:cvr:
  dmi.product.name: Latitude E7470
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1586641/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1542854] Re: App installation failure uses subtitle for a potentially long label

[Launchpad Bug Tracker]

This bug was fixed in the package unity-scope-click -
0.1.1+16.10.20160525-0ubuntu1

---
unity-scope-click (0.1.1+16.10.20160525-0ubuntu1) yakkety; urgency=medium

  * Add conditional debug for network timings. Force cached data if
network is 'disconnected' (as per connectivity status reported by
scopes API).
  * Build-depend on ubuntu-sdk-libs to avoid dependency problem on
arm64.
  * Clear network cache if language was changed (LP: #1575744)
  * Use text widget to display error strings. (LP: #1542854)

 -- Pawel Stolowski   Wed, 25 May 2016
16:20:15 +

** Changed in: unity-scope-click (Ubuntu)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1542854

Title:
  App installation failure uses subtitle for a potentially long label

Status in Canonical System Image:
  In Progress
Status in unity-scope-click package in Ubuntu:
  Fix Released
Status in unity8 package in Ubuntu:
  Won't Fix

Bug description:
  See this image: http://i.imgur.com/BFzgwnb.png

  The error messages is elided while it should be wrapped.

  
  In order to reproduce the above message, you can fill up the home folder to 
only have a few MB left and then try to install the document viewer.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1542854/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1575744] Re: Language in the Store scope doesn't always change when user switches lang of the phone

[Launchpad Bug Tracker]

This bug was fixed in the package unity-scope-click -
0.1.1+16.10.20160525-0ubuntu1

---
unity-scope-click (0.1.1+16.10.20160525-0ubuntu1) yakkety; urgency=medium

  * Add conditional debug for network timings. Force cached data if
network is 'disconnected' (as per connectivity status reported by
scopes API).
  * Build-depend on ubuntu-sdk-libs to avoid dependency problem on
arm64.
  * Clear network cache if language was changed (LP: #1575744)
  * Use text widget to display error strings. (LP: #1542854)

 -- Pawel Stolowski   Wed, 25 May 2016
16:20:15 +

** Changed in: unity-scope-click (Ubuntu)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtbase-opensource-src in
Ubuntu.
https://bugs.launchpad.net/bugs/1575744

Title:
  Language in the Store scope doesn't always change when user switches
  lang of the phone

Status in Canonical System Image:
  In Progress
Status in qtbase-opensource-src package in Ubuntu:
  Confirmed
Status in unity-scope-click package in Ubuntu:
  Fix Released

Bug description:
  Switching from English to Polish works as expected
  But then going back to English leaves me with store in Polish

  This survives reboots.

  Steps to reproduce:
  1. Go to Ubuntu Store scope (with your current language).
  2. Go to phone settings, change the language, accept & reboot the phone.
  3. Go to Ubuntu Store scope. Note how scope title and some strings such as 
"installed" changed for the new language (since these are provided locally by 
the scope for current LANG), but strings such as 'Highlight of the week' or 
departments names (hit the search lens icon to reveal departments) which come 
from the store still use the old language.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1575744/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1574079] Re: USB audio device is not recognized after startup in 16.04

[TheBigW]

output form my 2nd machine where occasionally the RME Fireface UCX is
not recognized:

Bus 001 Device 004: ID 1058:0730 Western Digital Technologies, Inc. My Passport 
Essential (WDBACY)
Bus 001 Device 003: ID 0424:3fb9 Standard Microsystems Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

mhh - I did not see it at all it seems, but aplay -l gives me perfectly:

Karte 0: UCX23660989 [Fireface UCX (23660989)], Gerät 0: USB Audio [USB Audio]
  Sub-Geräte: 0/1
  Sub-Gerät #0: subdevice #0
Karte 1: Intel [HDA Intel], Gerät 0: ALC861-VD Analog [ALC861-VD Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: Intel [HDA Intel], Gerät 6: Si3054 Modem [Si3054 Modem]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0

and at the moment it works as expected

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1574079

Title:
  USB audio device is not recognized after startup in 16.04

Status in alsa-driver package in Ubuntu:
  Invalid
Status in fwupd package in Ubuntu:
  Confirmed

Bug description:
  Hi @all,

  I used the same USB audio device in all previous Ubuntu versions
  (Focusrite Scarlet 2i2). It is supposed to be class compliant and
  works an all distros flawless (even RPI2 and OSMC). After upgrading
  from 15.10 to 16.04 it stopped to work: after start-up it does not
  show up as an audio device at all (also not recognized by aplay -l). I
  can workaround this by unplugging it and plugging it in again after
  Ubuntu booted up (strangely 2 times unplug/re-plug). After 2nd time
  plugging it in again it shows up and works great without any further
  issues until next restart.

  Maybe worth to note that I recognized today that fwupd uses
  continuously 100% CPU load, so I just killed it today. My Hardware
  (Main-board/CPU) is a bit older (Intel E8400), so could probably be
  some compatibility issue...

  regards,
  Tobias

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu5
  ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6
  Uname: Linux 4.4.0-21-generic i686
  NonfreeKernelModules: nvidia_modeset nvidia
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/pcmC1D0p:   tobias 1553 F...m pulseaudio
   /dev/snd/controlC1:  tobias 1553 F pulseaudio
   /dev/snd/controlC0:  tobias 1553 F pulseaudio
   /dev/snd/controlC2:  tobias 1553 F pulseaudio
  CurrentDesktop: Unity
  Date: Sat Apr 23 20:09:04 2016
  InstallationDate: Installed on 2015-09-19 (217 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release i386 (20150422)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  UpgradeStatus: Upgraded to xenial on 2016-04-22 (0 days ago)
  dmi.bios.date: 09/30/2008
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1238
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: P5B-Deluxe
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr1238:bd09/30/2008:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5B-Deluxe:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1574079/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1585774] Re: Cannot save.jpg from web page

[Olivier Tilloy]

No, that’s a different issue.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1585774

Title:
  Cannot save.jpg from web page

Status in ubuntu-download-manager package in Ubuntu:
  New
Status in webbrowser-app package in Ubuntu:
  Invalid

Bug description:
   Bear with me on this, it's a bit of a voyage.. There is his /thing/ I
  do when creating publicity for a web site, that works fine in Firefox,
  chrome, opera, Vivaldi, on a desktop; works fine in firefox, chrome,
  safari, and dolphin on IOS, and with internet or chrome on android..
  It doesn't work in our browser on he M10 tablet under OTA10.1

  1. Go to e.g. 
  http://www.geograph.org.uk/stamp.php?id=2612549
  (there are nearly 5 million photos, I chose a nice one for you to play with)

  2. Press 'get stamped image'
  you get an instruction to right-click and save as, and a watermarked image to 
do that to. 

  3. Our version of that is long-press, and download.
  so do that.

  what gets downloaded is not the.jpg but appears to be a fragment of
  html, or the url.

  That is /not/ what happens on any other browser on any other
  platform.. Elsewhere I get the.jpg

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-download-manager/+bug/1585774/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp