[Touch-packages] [Bug 1951491] Re: Can't run snaps: .slice/session-1.scope is not a snap cgroup
I All, I can confirm same problem with Ubuntu MATE 22.04 running Xtightvnc session. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1951491 Title: Can't run snaps: .slice/session-1.scope is not a snap cgroup Status in snapd package in Ubuntu: Invalid Status in systemd package in Ubuntu: Confirmed Status in snapd package in Debian: New Bug description: I just upgraded from hirsute to impish using do-release-upgrade. On the upgraded system, I can't run either firefox or chromium (both of which worked fine under hirsute). Both fail with: /user.slice/user-NNN.slice/session-1.scope is not a snap cgroup where NNN is my uid With firefox, I was able to fix the problem with: snap remove --purge firefox apt purge firefox apt install firefox Now firefox works. But I tried the same thing substituting chromium- browser for firefox, and it didn't help: chromium fails with the same error message. I guess there must be something left over from the hirsute version of snapd that isn't getting noticed or cleared by the impish version? Someone suggested this might be related to bug 1850667, but that bug is marked fixed as of a couple months ago, and I just did this upgrade today. Also, it doesn't mention the error message I'm seeing. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: snapd 2.53+21.10ubuntu1 ProcVersionSignature: Ubuntu 5.13.0-21.21-generic 5.13.18 Uname: Linux 5.13.0-21-generic x86_64 ApportVersion: 2.20.11-0ubuntu71 Architecture: amd64 CasperMD5CheckResult: unknown Date: Thu Nov 18 18:12:45 2021 InstallationDate: Installed on 2020-04-29 (568 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) SourcePackage: snapd UpgradeStatus: Upgraded to impish on 2021-11-18 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/snapd/+bug/1951491/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1794064] Re: Clicking a hyperlink in a PDF fails to open it if the default browser is a snap
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: evince (Ubuntu Jammy) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor in Ubuntu. https://bugs.launchpad.net/bugs/1794064 Title: Clicking a hyperlink in a PDF fails to open it if the default browser is a snap Status in apparmor package in Ubuntu: Confirmed Status in evince package in Ubuntu: Triaged Status in apparmor source package in Jammy: Confirmed Status in evince source package in Jammy: Confirmed Status in evince package in Debian: New Bug description: [Impact] * Users cannot open a hyperlink in a PDF opened with evince when the default browser is a snap. * The fix creates a snap_browsers abstraction on AppArmor which can be used in a transition for when the browser is executed. The snap_browsers abstraction provides the minimal amount of permissions required to execute a browser provided through snaps. This is a workaround since AppArmor currently does not provide mediation/filtering on enhanced environment variables. [Test Plan] * Make sure the default browser is provided through the snap store. * Open a PDF that contains a hyperlink using evince and click on the URL. * The browser should open the requested URL. [Where problems could occur] * If the browser or snap core update to have new requirements for opening a browser, then the current policy could become obsolete and will need to be updated again. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/1794064/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1794064] Re: Clicking a hyperlink in a PDF fails to open it if the default browser is a snap
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: apparmor (Ubuntu Jammy) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor in Ubuntu. https://bugs.launchpad.net/bugs/1794064 Title: Clicking a hyperlink in a PDF fails to open it if the default browser is a snap Status in apparmor package in Ubuntu: Confirmed Status in evince package in Ubuntu: Triaged Status in apparmor source package in Jammy: Confirmed Status in evince source package in Jammy: Confirmed Status in evince package in Debian: New Bug description: [Impact] * Users cannot open a hyperlink in a PDF opened with evince when the default browser is a snap. * The fix creates a snap_browsers abstraction on AppArmor which can be used in a transition for when the browser is executed. The snap_browsers abstraction provides the minimal amount of permissions required to execute a browser provided through snaps. This is a workaround since AppArmor currently does not provide mediation/filtering on enhanced environment variables. [Test Plan] * Make sure the default browser is provided through the snap store. * Open a PDF that contains a hyperlink using evince and click on the URL. * The browser should open the requested URL. [Where problems could occur] * If the browser or snap core update to have new requirements for opening a browser, then the current policy could become obsolete and will need to be updated again. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/1794064/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1969901] Re: network-manager fails to renew ipv6 address
Was able to reproduce, my workaround was a systemd timer to clear the dhcp lease files and restart networkmanager... which is rather violent. Confirmed client side problem, Win7,Win10,MacOS Montemery and Android 11 have no problems and do not lose their ipv6 on the same network. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1969901 Title: network-manager fails to renew ipv6 address Status in network-manager package in Ubuntu: Confirmed Bug description: [Impact] * This affects Ubuntu 18.04 where Network Manager version 1.10.6 is used. * Network manager might kill dhclient(6) and fail to start it again causing the IPv6 address to be lost on a network that uses mixed IPv4/IPV6. The network status will still be seen as online in gnome since ipv4 is still active. The user then have to manually remove the dhcpv6 lease files and restart ipv6 connection/restart network manager to regain IPv6 connectivity. * This is a cherry-pick from Network manager 1.10.8 (Ubuntu's version is based on 1.10.6): https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/commit/7fbbe7ebee99785e38d39c37e515a64a28edef0f * Upstream bug: https://bugzilla.gnome.org/show_bug.cgi?id=783391 [Test Plan] * The exact conditions for reproducing this bug on mixed IPv4/IPv6 networks are not known but includes using both IPv4 and IPv6, both using dhcp. [Where problems could occur] * This patch could possibly break networking using and that would be bad. Network manager should be able to restart connection more properly with this patch though. [Other Info] * We have tested this patch on a couple of clients where we have seen this this problem. If this patch is feasible to include in Ubuntu 18.04 we could request more users to test. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1969901/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1969901] Re: network-manager fails to renew ipv6 address
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: network-manager (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1969901 Title: network-manager fails to renew ipv6 address Status in network-manager package in Ubuntu: Confirmed Bug description: [Impact] * This affects Ubuntu 18.04 where Network Manager version 1.10.6 is used. * Network manager might kill dhclient(6) and fail to start it again causing the IPv6 address to be lost on a network that uses mixed IPv4/IPV6. The network status will still be seen as online in gnome since ipv4 is still active. The user then have to manually remove the dhcpv6 lease files and restart ipv6 connection/restart network manager to regain IPv6 connectivity. * This is a cherry-pick from Network manager 1.10.8 (Ubuntu's version is based on 1.10.6): https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/commit/7fbbe7ebee99785e38d39c37e515a64a28edef0f * Upstream bug: https://bugzilla.gnome.org/show_bug.cgi?id=783391 [Test Plan] * The exact conditions for reproducing this bug on mixed IPv4/IPv6 networks are not known but includes using both IPv4 and IPv6, both using dhcp. [Where problems could occur] * This patch could possibly break networking using and that would be bad. Network manager should be able to restart connection more properly with this patch though. [Other Info] * We have tested this patch on a couple of clients where we have seen this this problem. If this patch is feasible to include in Ubuntu 18.04 we could request more users to test. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1969901/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1973424] Re: ibus-extension-gtk3 does not start automatically
*** This bug is a duplicate of bug 1969637 *** https://bugs.launchpad.net/bugs/1969637 Thanks for your report! If you install gnome-settings-daemon 42.1-1ubuntu2.1 from jammy- proposed, the issue will hopefully go away. Please let us know if that is not sufficient. Marking this bug as a duplicate in the meantime. ** Package changed: ibus (Ubuntu) => gnome-settings-daemon (Ubuntu) ** This bug has been marked a duplicate of bug 1969637 IBus lookup table appears bottom left of application (x11) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ibus in Ubuntu. https://bugs.launchpad.net/bugs/1973424 Title: ibus-extension-gtk3 does not start automatically Status in gnome-settings-daemon package in Ubuntu: New Bug description: ibus-extension-gtk3 does not start automatically, which causes the candidate box of the Ibus input method to not follow the cursor of any gtk application. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: ibus 1.5.26-4 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu82 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sat May 14 22:18:41 2022 InstallationDate: Installed on 2022-04-23 (21 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) RebootRequiredPkgs: Error: path contained symlinks. SourcePackage: ibus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1973424/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1615381] Re: apt-get autoremove may remove current kernel
So there is neither /etc/apt/apt.conf.d/01autoremove-kernels nor /etc/kernel/postinst.d/apt-auto-removal anymore. Anyway I could not make 'apt autoremove' try to remove current kernel anymore. Tested by apt 2.0.8. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unattended-upgrades in Ubuntu. https://bugs.launchpad.net/bugs/1615381 Title: apt-get autoremove may remove current kernel Status in apt package in Ubuntu: Fix Released Status in unattended-upgrades package in Ubuntu: Fix Released Status in unattended-upgrades source package in Trusty: Won't Fix Status in unattended-upgrades source package in Xenial: Fix Released Status in unattended-upgrades source package in Artful: Won't Fix Status in apt source package in Bionic: Fix Released Status in apt source package in Focal: Fix Released Status in apt source package in Groovy: Fix Released Status in apt source package in Hirsute: Fix Released Bug description: [Impact] APT will try and fail to remove the currently running kernel, when booted into an older kernel that is not protected. May wreak some havoc if mixed with other operations to the point that apt goes weird and needs manual fixing up. [Test case] For the SRUs we have included an automated test case that starts with an empty autoremove config file, and then checks that the running kernel is protected at runtime. You can also test manually, but it's not necessary: - Install new kernel - Reboot into kernel not listed as protected in 01autoremove-kernels - Run autoremove [Where problems could occur] We may more easily run out of space in /boot. hirsute has new autoremoval code that runs completely at runtime; but that seems a bit large to SRU after only a few weeks in hirsute. Hence, we should protect the current kernel _in addition_ to the other kernels, just like unattended-upgrades and update-manager do. This increases the risk of filling up /boot compared to older apt versions, but is at the same level as unattended-upgrades and update-manager. [Original bug report] This may happen, if you boot one of the older kernels, that is not protected by /etc/apt/apt.conf.d/01autoremove-kernels Workaround: run /etc/kernel/postinst.d/apt-auto-removal during each boot (e.g. by using cron). Note: The workaround breaks autoremoving feature of new unneeded kernels in unattended-upgrades i.e. the setting 'Unattended-Upgrade::Remove-New-Unused-Dependencies "true"' (which is default in 16.04 unless 'Unattended-Upgrade::Remove-Unused-Dependencies "true"' is set in '/etc/apt/apt.conf.d/50unattended-upgrades'. In shell: $ uname -r 4.4.0-22-generic $ apt-get -s autoremove NOTE: This is only a simulation! apt-get needs root privileges for real execution. Keep also in mind that locking is deactivated, so don't depend on the relevance to the real current situation! Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-headers-4.4.0-21 linux-headers-4.4.0-21-generic linux-headers-4.4.0-22 linux-headers-4.4.0-22-generic linux-headers-4.4.0-31-generic linux-image-4.4.0-21-generic linux-image-4.4.0-22-generic linux-image-4.4.0-31-generic linux-image-extra-4.4.0-21-generic linux-image-extra-4.4.0-22-generic linux-image-extra-4.4.0-31-generic 0 upgraded, 0 newly installed, 11 to remove and 13 not upgraded. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: apt 1.2.12~ubuntu16.04.1 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: XFCE Date: Sun Aug 21 16:11:27 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2016-04-28 (114 days ago) InstallationMedia: Xubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: apt UpgradeStatus: No upgrade log present (probably fresh install) modified.conffile..etc.kernel.postinst.d.apt-auto-removal: [modified] mtime.conffile..etc.kernel.postinst.d.apt-auto-removal: 2016-07-30T12:15:32.706300 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1615381/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1968154] Re: Only keep 2 kernels
Test passed for apt 2.0.8 ** Tags removed: verification-needed-focal ** Tags added: verification-done-focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1968154 Title: Only keep 2 kernels Status in apt package in Ubuntu: Fix Released Status in apt source package in Bionic: Fix Committed Status in apt source package in Focal: Fix Committed Status in apt source package in Impish: Fix Committed Bug description: [Impact] APT currently keeps 3 kernels or even 4 in some releases. Our boot partition is sized for a steady state of 2 kernels + 1 new one being unpacked, hence users run out of space and new kernels fail to install, upgrade runs might abort in the middle. It's not nice. [Test plan] 1. Have two kernels installed (let's call them version 3, 2) 2. Check that both kernels are not autoremovable 3. Install an old kernel (let's call it 1), and mark it automatic 4. Check that 1 will be autoremovable (apt autoremove -s) 5. Reboot into 1, check that 2 is autoremovable (apt autoremove -s) 6. Actually remove 2 7. Reboot into 3 and check that both 1 and 3 are now not autoremovable [Where problems could occur] We could keep the wrong kernels installed that the user did not expect. We remove the requirement to keep the most recently installed version, previously recorded in APT::LastInstalledKernel, to achieve this, as we had 3 hard requirements so far: 1. keep booted kernel 2. keep highest version 3. keep most recently installed 1 can't be removed as it would break running systems, 2 is what you definitely want to keep. During normal system lifetime, the most recently installed kernel is the same as the highest version, so 2==3, and there are no changes to behavior. Likewise, if you most recently installed an older kernel manually for debugging, it would be manually installed and not subject to removal, even if the rule is dropped. The behavior really only changes if you install an older kernel, and then mark it auto - that older kernel becomes automatically removable immediately after it is marked as auto. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1968154/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1420766] Re: USB Wifi drops out every 2 minutes, needs disconnecting / reconnecting to work for a further 2 minutes
Can confirm, but haven't figured out why it occurs sometimes, and sometimes it doesn't. Definitely no indication of the problem on any UI, Wifi seems to be connected, it's just no internet coming through. Wifi on/off fixes it for just a few minutes, too. Very annoying problem, and it is due to Ubuntu 22.04, the same machine, previous Ubuntu, no problems, all other devices the network have no problems, there were no changes on the side of the router. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1420766 Title: USB Wifi drops out every 2 minutes, needs disconnecting / reconnecting to work for a further 2 minutes Status in network-manager package in Ubuntu: Confirmed Bug description: Wifi says it's connected at all times but the internet drops out and nothing connects on WLAN or the internet. Every 2 minutes, I disconnect and reconnect to make it work again but it soon drops out again. Recently upgraded from Ubuntu 11 where everything worked with 3rd party drivers that don't work with current version. ALl help gratefully received. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-30-generic 3.16.0-30.40 ProcVersionSignature: Ubuntu 3.16.0-30.40-generic 3.16.7-ckt3 Uname: Linux 3.16.0-30-generic i686 ApportVersion: 2.14.7-0ubuntu8.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: denzil 1953 F pulseaudio /dev/snd/controlC1: denzil 1953 F pulseaudio CurrentDesktop: Unity Date: Wed Feb 11 23:02:21 2015 HibernationDevice: RESUME=UUID=78e81787-eebb-4e88-9c8f-8e766633b555 InstallationDate: Installed on 2015-01-17 (24 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release i386 (20141022.1) MachineType: Dell Inc. OptiPlex 755 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic root=UUID=cff858b0-1018-474f-9e05-9b9c556233c5 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-30-generic N/A linux-backports-modules-3.16.0-30-generic N/A linux-firmware 1.138.1 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 0DR845 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd03/11/2008:svnDellInc.:pnOptiPlex755:pvr:rvnDellInc.:rn0DR845:rvr:cvnDellInc.:ct3:cvr: dmi.product.name: OptiPlex 755 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1420766/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1970081] Re: The background image of the login window cannot be changed
In the meanwhile I've found a workaround: i copied the picture i want to use as lightdm background on /usr/share/backgrounds/ubuntu-mate-jammy and renamed it with the system default image name. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1970081 Title: The background image of the login window cannot be changed Status in Ubuntu MATE: New Status in arctica-greeter package in Ubuntu: Confirmed Status in lightdm package in Ubuntu: Confirmed Bug description: After upgrading from Ubuntu 20.04 Mate to 22.04 Mate, my custom wallpaper was replaced with the default one. I can make a change via the menu, but it stays with the default background image. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1970081/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1973424] [NEW] ibus-extension-gtk3 does not start automatically
Public bug reported: ibus-extension-gtk3 does not start automatically, which causes the candidate box of the Ibus input method to not follow the cursor of any gtk application. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: ibus 1.5.26-4 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu82 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sat May 14 22:18:41 2022 InstallationDate: Installed on 2022-04-23 (21 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) RebootRequiredPkgs: Error: path contained symlinks. SourcePackage: ibus UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ibus (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy wayland-session ** Summary changed: - ibus-extension-gtk3 + ibus-extension-gtk3 does not start automatically -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ibus in Ubuntu. https://bugs.launchpad.net/bugs/1973424 Title: ibus-extension-gtk3 does not start automatically Status in ibus package in Ubuntu: New Bug description: ibus-extension-gtk3 does not start automatically, which causes the candidate box of the Ibus input method to not follow the cursor of any gtk application. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: ibus 1.5.26-4 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu82 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sat May 14 22:18:41 2022 InstallationDate: Installed on 2022-04-23 (21 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) RebootRequiredPkgs: Error: path contained symlinks. SourcePackage: ibus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ibus/+bug/1973424/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1973405] [NEW] Ubuntu 22.04/Wayland Session: Crash when resizing snapped windows
Public bug reported: 1. Login: Wayland Session 2. Started Firefox snap via terminal: MOZ_ENABLE_WAYLAND=1 snap run firefox & disown 3. Started Visual Studio Code snap 4. Started File 5. Snapped the three windows to left and right (Firefox to the left and the other two windows to the right) 6. Dragged the windows border to resize the windows - repeat this a few times, adjust the third window to snap again (VSCode) Observed: - Poor performance while resizing - The desktop freezes for a few seconds sometimes - Crash to login screen. I have a hybrid system. I had disabled the internal screen and I was playing around on the external monitor connected HDMI. I think the HDMI in my laptop is connected to the discreet NVIDIA card. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: xorg 1:7.7+23ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.capabilities.gpu0: Error: path was not a regular file. .proc.driver.nvidia.capabilities.mig: Error: path was not a regular file. .proc.driver.nvidia.gpus..01.00.0: Error: path was not a regular file. .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 510.60.02 Wed Mar 16 11:24:05 UTC 2022 GCC version: ApportVersion: 2.20.11-0ubuntu82 Architecture: amd64 CasperMD5CheckResult: pass CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sat May 14 14:02:59 2022 DistUpgraded: Fresh install DistroCodename: jammy DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation HD Graphics 630 [8086:591b] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Dell HD Graphics 630 [1028:0798] NVIDIA Corporation GP107M [GeForce GTX 1050 Ti Mobile] [10de:1c8c] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell GP107M [GeForce GTX 1050 Ti Mobile] [1028:0798] InstallationDate: Installed on 2022-05-01 (12 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) MachineType: Dell Inc. Inspiron 15 7000 Gaming ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-27-generic root=UUID=19e3ad11-d1ce-49ce-8809-80fc68612eb3 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg crash UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/30/2021 dmi.bios.release: 1.15 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.15.0 dmi.board.name: 065C71 dmi.board.vendor: Dell Inc. dmi.board.version: X02 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.15.0:bd08/30/2021:br1.15:svnDellInc.:pnInspiron157000Gaming:pvr:rvnDellInc.:rn065C71:rvrX02:cvnDellInc.:ct10:cvr:sku0798: dmi.product.family: Inspiron dmi.product.name: Inspiron 15 7000 Gaming dmi.product.sku: 0798 dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.110-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 22.0.1-1ubuntu2 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.3-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2build3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug crash jammy ubuntu wayland-session -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1973405 Title: Ubuntu 22.04/Wayland Session: Crash when resizing snapped windows Status in xorg package in Ubuntu: New Bug description: 1. Login: Wayland Session 2. Started Firefox snap via terminal: MOZ_ENABLE_WAYLAND=1 snap run firefox & disown 3. Started Visual Studio Code snap 4. Started File 5. Snapped the three windows to left and right (Firefox to the left and the other two windows to the right) 6. Dragged the windows border to resize the windows - repeat this a few times, adjust the third window to snap again (VSCode) Observed: - Poor performance while resizing - The desktop freezes for a few seconds sometimes - Crash to login screen. I have a hybrid system. I had disabled the internal screen and I was playing around on the external monitor connected HDMI. I think the HDMI in my laptop is connected to the discreet NVIDIA card. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: xorg 1:7.7+23ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-27.28-generic 5.15.30 Uname: Linux 5.15.0-27-generic x86_64
[Touch-packages] [Bug 1962541] Re: PEAP wifi can't connect (ubuntu live/installer is also not working
This bug was fixed in the package wpa - 2:2.10-9 --- wpa (2:2.10-9) unstable; urgency=medium [ Sebastien Bacher ] * debian/patches/allow-legacy-renegotiation.patch: Allow legacy renegotiation to fix PEAP issues with some servers (Closes: #1010603, LP: #1962541) -- Andrej Shadura Thu, 05 May 2022 11:23:33 +0100 ** Changed in: wpa (Ubuntu) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to wpa in Ubuntu. https://bugs.launchpad.net/bugs/1962541 Title: PEAP wifi can't connect (ubuntu live/installer is also not working Status in wpa package in Ubuntu: Fix Released Status in wpa source package in Jammy: Fix Committed Bug description: * Impact Connecting to some PEAP wifi doesn't work anymore since the openssl3 transition Details on the issue can be found on http://lists.infradead.org/pipermail/hostap/2022-May/040511.html * Test case Try using a PEAP wifi not implementing RFC5746, it should be able to connect * Regression potential The change allows to connect to less secure WiFis the same way that wpa allowed before openssl3, lower security enforcement isn't ideal but still better than non working hardware. WPA2 enterprise can't connect PEAP ubuntu 22.04 live/installer is not working too ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: ubuntu-release-upgrader-core 1:22.04.6 Uname: Linux 5.16.0-kali1-amd64 x86_64 ApportVersion: 2.20.11-0ubuntu78 Architecture: amd64 CasperMD5CheckResult: unknown CrashDB: ubuntu CurrentDesktop: ubuntu:GNOME Date: Tue Mar 1 09:18:42 2022 PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: dist-upgrade UpgradeStatus: No upgrade log present (probably fresh install) VarLogDistupgradeTermlog: mtime.conffile..etc.update-manager.release-upgrades: 2022-02-27T21:07:16.553410 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/wpa/+bug/1962541/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1973270] Re: json-c please mark package as multiarch
(and also, retrying the test made it pass) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to json-c in Ubuntu. https://bugs.launchpad.net/bugs/1973270 Title: json-c please mark package as multiarch Status in json-c package in Ubuntu: Fix Released Status in json-c source package in Jammy: Fix Committed Status in json-c source package in Kinetic: Fix Released Bug description: [Impact] People using multi-arch to build for different architectures [Test Plan] * Install json-c on M-A environment [Where problems could occur] * Specially now that we don't have anymore real i386 env [Other Info] json-c (0.15-3) unstable; urgency=medium * Mark dev package as M-A: same (Closes: #1009805) - thanks Tomeu Vizoso for the hint. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/json-c/+bug/1973270/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1973270] Re: json-c please mark package as multiarch
after checking swupdate against migration-reference/0 in jammy, the same regression was seen, so now britney is not seeing it as regression anymore. Autopkgtests are now fine! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to json-c in Ubuntu. https://bugs.launchpad.net/bugs/1973270 Title: json-c please mark package as multiarch Status in json-c package in Ubuntu: Fix Released Status in json-c source package in Jammy: Fix Committed Status in json-c source package in Kinetic: Fix Released Bug description: [Impact] People using multi-arch to build for different architectures [Test Plan] * Install json-c on M-A environment [Where problems could occur] * Specially now that we don't have anymore real i386 env [Other Info] json-c (0.15-3) unstable; urgency=medium * Mark dev package as M-A: same (Closes: #1009805) - thanks Tomeu Vizoso for the hint. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/json-c/+bug/1973270/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1927192] Re: gdb ftbfs on armhf, testsuite timeouts
** Changed in: gdb Status: Incomplete => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gdb in Ubuntu. https://bugs.launchpad.net/bugs/1927192 Title: gdb ftbfs on armhf, testsuite timeouts Status in gdb: Fix Released Status in gdb package in Ubuntu: Fix Released Status in glibc package in Ubuntu: Fix Released Status in gdb source package in Focal: Fix Released Status in glibc source package in Focal: Fix Released Status in gdb source package in Groovy: Won't Fix Status in glibc source package in Groovy: Won't Fix Status in gdb source package in Hirsute: Won't Fix Status in glibc source package in Hirsute: Won't Fix Status in gdb source package in Impish: Fix Released Status in glibc source package in Impish: Fix Released Bug description: [Impact] * Gdb can't set some breakpoints in ld.so on armhf when libc6-dbg is not installed. [Test Plan] * Check that ld.so is not stripped on armhf: $ /lib/*/ld-2.31.so libc6/lib/arm-linux-gnueabihf/ld-2.31.so: ELF 32-bit LSB shared object, ARM, EABI5 version 1 (SYSV), dynamically linked, BuildID[sha1]=e20a43bff0c4d2aa7f508c93eadad973ea0c0af9, with debug_info, not stripped * Check that ld.so is stripped on amd64: $ file /lib/x86_64-linux-gnu/ld-2.31.so /lib/x86_64-linux-gnu/ld-2.31.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, BuildID[sha1]=ea85fcb25ee4c4c9e7b180924ab4a44257a9547a, stripped [Where problems could occur] * The fix is not stripping ld.so on armhf. Not stripping it comes with a notable increase in file size and it may be performance critical 109K stripped vs 1.3M unstripped. Accidentally ld.so could be left unstripped on other architectures, but the test plan covers checking that, at least on amd64. Other than those not stripping ld.so should not cause any issue. [Original Bug Text] see https://launchpad.net/ubuntu/+source/gdb/10.2-0ubuntu3 $ zcat buildlog_ubuntu-impish-armhf.gdb_10.2-0ubuntu3_BUILDING.txt.gz | fgrep '(timeout)'|wc -l 10451 To manage notifications about this bug go to: https://bugs.launchpad.net/gdb/+bug/1927192/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1927192]
Fixed based on https://bugs.launchpad.net/ubuntu/+source/gdb/+bug/1927192 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gdb in Ubuntu. https://bugs.launchpad.net/bugs/1927192 Title: gdb ftbfs on armhf, testsuite timeouts Status in gdb: Fix Released Status in gdb package in Ubuntu: Fix Released Status in glibc package in Ubuntu: Fix Released Status in gdb source package in Focal: Fix Released Status in glibc source package in Focal: Fix Released Status in gdb source package in Groovy: Won't Fix Status in glibc source package in Groovy: Won't Fix Status in gdb source package in Hirsute: Won't Fix Status in glibc source package in Hirsute: Won't Fix Status in gdb source package in Impish: Fix Released Status in glibc source package in Impish: Fix Released Bug description: [Impact] * Gdb can't set some breakpoints in ld.so on armhf when libc6-dbg is not installed. [Test Plan] * Check that ld.so is not stripped on armhf: $ /lib/*/ld-2.31.so libc6/lib/arm-linux-gnueabihf/ld-2.31.so: ELF 32-bit LSB shared object, ARM, EABI5 version 1 (SYSV), dynamically linked, BuildID[sha1]=e20a43bff0c4d2aa7f508c93eadad973ea0c0af9, with debug_info, not stripped * Check that ld.so is stripped on amd64: $ file /lib/x86_64-linux-gnu/ld-2.31.so /lib/x86_64-linux-gnu/ld-2.31.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, BuildID[sha1]=ea85fcb25ee4c4c9e7b180924ab4a44257a9547a, stripped [Where problems could occur] * The fix is not stripping ld.so on armhf. Not stripping it comes with a notable increase in file size and it may be performance critical 109K stripped vs 1.3M unstripped. Accidentally ld.so could be left unstripped on other architectures, but the test plan covers checking that, at least on amd64. Other than those not stripping ld.so should not cause any issue. [Original Bug Text] see https://launchpad.net/ubuntu/+source/gdb/10.2-0ubuntu3 $ zcat buildlog_ubuntu-impish-armhf.gdb_10.2-0ubuntu3_BUILDING.txt.gz | fgrep '(timeout)'|wc -l 10451 To manage notifications about this bug go to: https://bugs.launchpad.net/gdb/+bug/1927192/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
