[Touch-packages] [Bug 2062501] Re: Dhcpcd prioritizes (unconnnected) LAN adapter over WLAN, causing a 5 min boot delay

[Albert Weichselbraun]

Thank you for helping debug this issue. I concur with your assessment.
- this should be handled by aoetools (probably similar to the way nfs versus 
nfsroot is handled).

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu.
https://bugs.launchpad.net/bugs/2062501

Title:
  Dhcpcd prioritizes (unconnnected) LAN adapter over WLAN, causing a 5
  min boot delay

Status in aoetools package in Ubuntu:
  New
Status in initramfs-tools package in Ubuntu:
  New

Bug description:
  After upgrading to Ubuntu 24.04, dhcpcd spends over five minutes trying to 
obtain a DHCP lease for an unconnected LAN adapter during startup.
  Only after this process times out, the boot process resumes.

  Consequently, startup works flawlessly, if the laptop is connected to
  the LAN, but takes five additional minutes, if that's not the case.

  Please find below the console output (obtained by pressing "ESC"
  during bootup)

  Setting ip link enp0s... up
  Setting ip link enx0... up
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 30 seconds before retrying getting a DHCP lease
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 60 seconds before retrying getting a DHCP lease
  ...
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 120 seconds before retrying getting a DHCP lease

  
  After multiples tries to obtain a DHCP lease (which take approximately five 
minutes) the standard boot process resumes.

  ProblemType: Bug
  DistroRelease: Ubuntu 24.04
  Package: initramfs-tools 0.142ubuntu25
  ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1
  Uname: Linux 6.8.0-22-generic x86_64
  ApportVersion: 2.28.1-0ubuntu1
  Architecture: amd64
  CasperMD5CheckMismatches: ./preseed/ubuntu.seed 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-firmware-535-535.113.01_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/xserver-xorg-video-nvidia-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-compute-utils-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-kernel-source-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-driver-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-utils-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-kernel-common-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/libnvidia-gl-535_535.113.01-0ubuntu3_i386.deb
  CasperMD5CheckResult: fail
  CurrentDesktop: ubuntu:GNOME
  Date: Fri Apr 19 07:40:31 2024
  InstallationDate: Installed on 2023-12-03 (138 days ago)
  InstallationMedia: Ubuntu Legacy 23.10 "Mantic Minotaur" - Release amd64 
(20231010)
  PackageArchitecture: all
  SourcePackage: initramfs-tools
  UpgradeStatus: Upgraded to noble on 2024-04-18 (1 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/aoetools/+bug/2062501/+subscriptions


-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 2062501] Re: Dhcpcd prioritizes (unconnnected) LAN adapter over WLAN, causing a 5 min boot delay

[Albert Weichselbraun]

** Attachment added: "initramfs.debug"
   
https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2062501/+attachment/5768166/+files/initramfs.debug

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu.
https://bugs.launchpad.net/bugs/2062501

Title:
  Dhcpcd prioritizes (unconnnected) LAN adapter over WLAN, causing a 5
  min boot delay

Status in initramfs-tools package in Ubuntu:
  New

Bug description:
  After upgrading to Ubuntu 24.04, dhcpcd spends over five minutes trying to 
obtain a DHCP lease for an unconnected LAN adapter during startup.
  Only after this process times out, the boot process resumes.

  Consequently, startup works flawlessly, if the laptop is connected to
  the LAN, but takes five additional minutes, if that's not the case.

  Please find below the console output (obtained by pressing "ESC"
  during bootup)

  Setting ip link enp0s... up
  Setting ip link enx0... up
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 30 seconds before retrying getting a DHCP lease
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 60 seconds before retrying getting a DHCP lease
  ...
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 120 seconds before retrying getting a DHCP lease

  
  After multiples tries to obtain a DHCP lease (which take approximately five 
minutes) the standard boot process resumes.

  ProblemType: Bug
  DistroRelease: Ubuntu 24.04
  Package: initramfs-tools 0.142ubuntu25
  ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1
  Uname: Linux 6.8.0-22-generic x86_64
  ApportVersion: 2.28.1-0ubuntu1
  Architecture: amd64
  CasperMD5CheckMismatches: ./preseed/ubuntu.seed 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-firmware-535-535.113.01_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/xserver-xorg-video-nvidia-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-compute-utils-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-kernel-source-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-driver-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-utils-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-kernel-common-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/libnvidia-gl-535_535.113.01-0ubuntu3_i386.deb
  CasperMD5CheckResult: fail
  CurrentDesktop: ubuntu:GNOME
  Date: Fri Apr 19 07:40:31 2024
  InstallationDate: Installed on 2023-12-03 (138 days ago)
  InstallationMedia: Ubuntu Legacy 23.10 "Mantic Minotaur" - Release amd64 
(20231010)
  PackageArchitecture: all
  SourcePackage: initramfs-tools
  UpgradeStatus: Upgraded to noble on 2024-04-18 (1 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2062501/+subscriptions


-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 2062501] Re: Dhcpcd prioritizes (unconnnected) LAN adapter over WLAN, causing a 5 min boot delay

[Albert Weichselbraun]

Sure - please find enclosed /run/initramfs/initramfs.debug

It looks like the problem is caused by `configure_networking` from
`/usr/share/initramfs-tools/scripts/functions` which is called due to
the installed `aoetools` package (which calls `configure_networking` in
`/usr/share/initramfs-tools/scripts/local-top/aoe`).


** Attachment added: "initramfs.debug"
   
https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2062501/+attachment/5768165/+files/initramfs.debug

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu.
https://bugs.launchpad.net/bugs/2062501

Title:
  Dhcpcd prioritizes (unconnnected) LAN adapter over WLAN, causing a 5
  min boot delay

Status in initramfs-tools package in Ubuntu:
  New

Bug description:
  After upgrading to Ubuntu 24.04, dhcpcd spends over five minutes trying to 
obtain a DHCP lease for an unconnected LAN adapter during startup.
  Only after this process times out, the boot process resumes.

  Consequently, startup works flawlessly, if the laptop is connected to
  the LAN, but takes five additional minutes, if that's not the case.

  Please find below the console output (obtained by pressing "ESC"
  during bootup)

  Setting ip link enp0s... up
  Setting ip link enx0... up
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 30 seconds before retrying getting a DHCP lease
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 60 seconds before retrying getting a DHCP lease
  ...
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 120 seconds before retrying getting a DHCP lease

  
  After multiples tries to obtain a DHCP lease (which take approximately five 
minutes) the standard boot process resumes.

  ProblemType: Bug
  DistroRelease: Ubuntu 24.04
  Package: initramfs-tools 0.142ubuntu25
  ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1
  Uname: Linux 6.8.0-22-generic x86_64
  ApportVersion: 2.28.1-0ubuntu1
  Architecture: amd64
  CasperMD5CheckMismatches: ./preseed/ubuntu.seed 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-firmware-535-535.113.01_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/xserver-xorg-video-nvidia-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-compute-utils-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-kernel-source-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-driver-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-utils-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-kernel-common-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/libnvidia-gl-535_535.113.01-0ubuntu3_i386.deb
  CasperMD5CheckResult: fail
  CurrentDesktop: ubuntu:GNOME
  Date: Fri Apr 19 07:40:31 2024
  InstallationDate: Installed on 2023-12-03 (138 days ago)
  InstallationMedia: Ubuntu Legacy 23.10 "Mantic Minotaur" - Release amd64 
(20231010)
  PackageArchitecture: all
  SourcePackage: initramfs-tools
  UpgradeStatus: Upgraded to noble on 2024-04-18 (1 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2062501/+subscriptions


-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 2062501] Re: Dhcpcd prioritizes (unconnnected) LAN adapter over WLAN, causing a 5 min boot delay

[Albert Weichselbraun]

The machine has a Wifi and a LAN adapter:


00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (4) I219-LM 
(rev 21)
01:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)



Kernel cmdline parameters:


BOOT_IMAGE=/vmlinuz-6.8.0-22-generic 
root=UUID=50fe4fec-39c1-4ec0-8401-328516b4fa86 ro quiet splash i915.enable_psr=0


-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu.
https://bugs.launchpad.net/bugs/2062501

Title:
  Dhcpcd prioritizes (unconnnected) LAN adapter over WLAN, causing a 5
  min boot delay

Status in initramfs-tools package in Ubuntu:
  New

Bug description:
  After upgrading to Ubuntu 24.04, dhcpcd spends over five minutes trying to 
obtain a DHCP lease for an unconnected LAN adapter during startup.
  Only after this process times out, the boot process resumes.

  Consequently, startup works flawlessly, if the laptop is connected to
  the LAN, but takes five additional minutes, if that's not the case.

  Please find below the console output (obtained by pressing "ESC"
  during bootup)

  Setting ip link enp0s... up
  Setting ip link enx0... up
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 30 seconds before retrying getting a DHCP lease
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 60 seconds before retrying getting a DHCP lease
  ...
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 120 seconds before retrying getting a DHCP lease

  
  After multiples tries to obtain a DHCP lease (which take approximately five 
minutes) the standard boot process resumes.

  ProblemType: Bug
  DistroRelease: Ubuntu 24.04
  Package: initramfs-tools 0.142ubuntu25
  ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1
  Uname: Linux 6.8.0-22-generic x86_64
  ApportVersion: 2.28.1-0ubuntu1
  Architecture: amd64
  CasperMD5CheckMismatches: ./preseed/ubuntu.seed 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-firmware-535-535.113.01_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/xserver-xorg-video-nvidia-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-compute-utils-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-kernel-source-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-driver-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-utils-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-kernel-common-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/libnvidia-gl-535_535.113.01-0ubuntu3_i386.deb
  CasperMD5CheckResult: fail
  CurrentDesktop: ubuntu:GNOME
  Date: Fri Apr 19 07:40:31 2024
  InstallationDate: Installed on 2023-12-03 (138 days ago)
  InstallationMedia: Ubuntu Legacy 23.10 "Mantic Minotaur" - Release amd64 
(20231010)
  PackageArchitecture: all
  SourcePackage: initramfs-tools
  UpgradeStatus: Upgraded to noble on 2024-04-18 (1 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2062501/+subscriptions


-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 2062501] [NEW] Dhcpcd prioritizes (unconnnected) LAN adapter over WLAN, causing a 5 min boot delay

[Albert Weichselbraun]

Public bug reported:

After upgrading to Ubuntu 24.04, dhcpcd spends over five minutes trying to 
obtain a DHCP lease for an unconnected LAN adapter during startup.
Only after this process times out, the boot process resumes.

Consequently, startup works flawlessly, if the laptop is connected to
the LAN, but takes five additional minutes, if that's not the case.

Please find below the console output (obtained by pressing "ESC" during
bootup)

Setting ip link enp0s... up
Setting ip link enx0... up
dhcpcd-10.0.6 starting
dev: loaded udev
no interfaces have a carrier
exiting due to oneshot
Sleeping 30 seconds before retrying getting a DHCP lease
dhcpcd-10.0.6 starting
dev: loaded udev
no interfaces have a carrier
exiting due to oneshot
Sleeping 60 seconds before retrying getting a DHCP lease
...
dhcpcd-10.0.6 starting
dev: loaded udev
no interfaces have a carrier
exiting due to oneshot
Sleeping 120 seconds before retrying getting a DHCP lease


After multiples tries to obtain a DHCP lease (which take approximately five 
minutes) the standard boot process resumes.

ProblemType: Bug
DistroRelease: Ubuntu 24.04
Package: initramfs-tools 0.142ubuntu25
ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1
Uname: Linux 6.8.0-22-generic x86_64
ApportVersion: 2.28.1-0ubuntu1
Architecture: amd64
CasperMD5CheckMismatches: ./preseed/ubuntu.seed 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-firmware-535-535.113.01_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/xserver-xorg-video-nvidia-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-compute-utils-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-kernel-source-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-driver-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-utils-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-kernel-common-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/libnvidia-gl-535_535.113.01-0ubuntu3_i386.deb
CasperMD5CheckResult: fail
CurrentDesktop: ubuntu:GNOME
Date: Fri Apr 19 07:40:31 2024
InstallationDate: Installed on 2023-12-03 (138 days ago)
InstallationMedia: Ubuntu Legacy 23.10 "Mantic Minotaur" - Release amd64 
(20231010)
PackageArchitecture: all
SourcePackage: initramfs-tools
UpgradeStatus: Upgraded to noble on 2024-04-18 (1 days ago)

** Affects: initramfs-tools (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug noble wayland-session

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu.
https://bugs.launchpad.net/bugs/2062501

Title:
  Dhcpcd prioritizes (unconnnected) LAN adapter over WLAN, causing a 5
  min boot delay

Status in initramfs-tools package in Ubuntu:
  New

Bug description:
  After upgrading to Ubuntu 24.04, dhcpcd spends over five minutes trying to 
obtain a DHCP lease for an unconnected LAN adapter during startup.
  Only after this process times out, the boot process resumes.

  Consequently, startup works flawlessly, if the laptop is connected to
  the LAN, but takes five additional minutes, if that's not the case.

  Please find below the console output (obtained by pressing "ESC"
  during bootup)

  Setting ip link enp0s... up
  Setting ip link enx0... up
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 30 seconds before retrying getting a DHCP lease
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 60 seconds before retrying getting a DHCP lease
  ...
  dhcpcd-10.0.6 starting
  dev: loaded udev
  no interfaces have a carrier
  exiting due to oneshot
  Sleeping 120 seconds before retrying getting a DHCP lease

  
  After multiples tries to obtain a DHCP lease (which take approximately five 
minutes) the standard boot process resumes.

  ProblemType: Bug
  DistroRelease: Ubuntu 24.04
  Package: initramfs-tools 0.142ubuntu25
  ProcVersionSignature: Ubuntu 6.8.0-22.22-generic 6.8.1
  Uname: Linux 6.8.0-22-generic x86_64
  ApportVersion: 2.28.1-0ubuntu1
  Architecture: amd64
  CasperMD5CheckMismatches: ./preseed/ubuntu.seed 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-firmware-535-535.113.01_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/xserver-xorg-video-nvidia-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-compute-utils-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-kernel-source-535_535.113.01-0ubuntu3_amd64.deb
 
./pool/restricted/n/nvidia-graphics-drivers-535/nvidia-driver-535_535.113.01-0ubuntu3_amd64.deb
 

[Touch-packages] [Bug 1871794] Re: [Bluetooth] No audio output/input in HSP/HFP mode

[AlberT]

Same issue here.

  - HW:Lenovo ThinkPad X1 Carbon Gen 10
  - HeadSet:  Sennheiser 4.50BTNC
  - OS: Ubuntu 22.04.1 LTS (Jammy Jellyfish)
  - BT fw:   intel/ibt-0040-0041.sfi
  - Kernel:  5.15.0-52-generic #58-Ubuntu SMP

If high quality output is selected no input channel is available. To be
able to use the headphones mic one has to use the mono channel output
...

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1871794

Title:
  [Bluetooth] No audio output/input in HSP/HFP mode

Status in bluez package in Ubuntu:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Fix Released

Bug description:
  I'm testing with Sony bluetooth headset SBH20, works fine in A2DP
  profile, but I can't get audio input and output work in HSP/HFP
  profile.

  [Reproduce steps]
  1. Scan and pair BT headset in Bluetooth setting
  2. Switch to HSP/HFP profile in Sound setting
  3. Test sound output/input

  [Machine information]
  ProblemType: Bug
  DistroRelease: Ubuntu 20.04
  Package: pulseaudio 1:13.99.1-1ubuntu1
  ProcVersionSignature: Ubuntu 5.4.0-21.25-generic 5.4.27
  Uname: Linux 5.4.0-21-generic x86_64
  ApportVersion: 2.20.11-0ubuntu25
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 1359 F pulseaudio
  CurrentDesktop: ubuntu:GNOME
  Date: Thu Apr  9 16:26:52 2020
  InstallationDate: Installed on 2020-04-09 (0 days ago)
  InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200402)
  SourcePackage: pulseaudio
  Symptom: audio
  Symptom_Card: SBH20
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 1359 F pulseaudio
  Symptom_Type: No sound at all
  Title: [SBH20, recording] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 09/17/2019
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 1.0.13
  dmi.board.name: 0188D1
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 31
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvr1.0.13:bd09/17/2019:svnDellInc.:pnXPS1373902-in-1:pvr:rvnDellInc.:rn0188D1:rvrA00:cvnDellInc.:ct31:cvr:
  dmi.product.family: XPS
  dmi.product.name: XPS 13 7390 2-in-1
  dmi.product.sku: 08B0
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1871794/+subscriptions


-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1508146] Re: Alt+left/right arrows switch between tty consoles (Gnome Shell vanishes), cannot disable

[Albert Gil]

*** This bug is a duplicate of bug 520546 ***
https://bugs.launchpad.net/bugs/520546

Same problem and solution today in ubuntu 20.04.
Thanks for the solution!

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to console-setup in Ubuntu.
https://bugs.launchpad.net/bugs/1508146

Title:
  Alt+left/right arrows switch between tty consoles (Gnome Shell
  vanishes), cannot disable

Status in console-setup package in Ubuntu:
  Confirmed
Status in gdm3 package in Ubuntu:
  Confirmed
Status in gnome-shell package in Ubuntu:
  Confirmed
Status in kubuntu-meta package in Ubuntu:
  Confirmed
Status in lightdm package in Ubuntu:
  Confirmed
Status in mutter package in Ubuntu:
  Confirmed

Bug description:
  I'm used to using alt+left/right arrow to navigate back and forward in
  web browsers and elsewhere (nautilus)...  But on this fresh install of
  Ubuntu Gnome 15.10 beta, it seems to try and switch me between tty
  consoles (the ctrl+alt+f1 ones).  But it's not listed as one of the
  shortcuts in the "keyboard" menu, so I don't know how to disable it...

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/console-setup/+bug/1508146/+subscriptions


-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1901373] Re: isc-dhcp-server AppArmor Denied on /proc/sys/net/ipv4/ip_local_port_range

[Michael Albert]

I can confirm that I am seeing this same behavior. The proposed fix also
worked for me.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to isc-dhcp in Ubuntu.
https://bugs.launchpad.net/bugs/1901373

Title:
  isc-dhcp-server AppArmor Denied on
  /proc/sys/net/ipv4/ip_local_port_range

Status in isc-dhcp package in Ubuntu:
  Confirmed

Bug description:
  The following AppArmor denial errors are shown on startup:

  Oct 25 00:52:00 xxx kernel: [  556.231990] audit: type=1400 
audit(1603601520.710:32): apparmor="DENIED" operation="open" 
profile="/usr/sbin/dhcpd" name="/proc/sys/net/ipv4/ip_local_port_range" 
pid=1982 comm="dhcpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
  Oct 25 00:52:00 xxx kernel: [  556.232257] audit: type=1400 
audit(1603601520.710:33): apparmor="DENIED" operation="open" 
profile="/usr/sbin/dhcpd" name="/proc/sys/net/ipv4/ip_local_port_range" 
pid=1982 comm="dhcpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0

  
  Fix is to edit /etc/apparmor.d/local/usr.sbin.dhcpd to have:
  @{PROC}/sys/net/ipv4/ip_local_port_range r,


  'lsb_release -rd':
  Description:Ubuntu 20.04.1 LTS
  Release:20.04

  isc-dhcp-server:
Installed: 4.4.1-2.1ubuntu5
Candidate: 4.4.1-2.1ubuntu5
Version table:
   *** 4.4.1-2.1ubuntu5 500
  500 http://us.archive.ubuntu.com/ubuntu focal/main amd64 Packages
  100 /var/lib/dpkg/status

  apparmor:
Installed: 2.13.3-7ubuntu5.1
Candidate: 2.13.3-7ubuntu5.1
Version table:
   *** 2.13.3-7ubuntu5.1 500
  500 http://us.archive.ubuntu.com/ubuntu focal-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   2.13.3-7ubuntu5 500
  500 http://us.archive.ubuntu.com/ubuntu focal/main amd64 Packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1901373/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1898547] Re: neutron-linuxbridge-agent fails to start with iptables 1.8.5

[Albert Damen]

I have verified the fixed package, see attached terminal output.

Steps taken:
- check package version
- verify nf_tables is used
- check default chains have not been created yet
- run test case
- check if default chain has been created

After that I upgraded the iptables packages on my neutron and compute hosts and 
rebooted them. Without any manual intervention the linuxbridge-agent was 
started and I could start a new instance which entered the "Running" state and 
had network connectivity.
The linuxbridge-agent logs did not contain errors regarding iptables after the 
reboot.

** Attachment added: "bug1898547_verification"
   
https://bugs.launchpad.net/ubuntu/+source/neutron/+bug/1898547/+attachment/5431817/+files/bug1898547_verification

** Tags removed: verification-needed-groovy
** Tags added: verification-done-groovy

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to iptables in Ubuntu.
https://bugs.launchpad.net/bugs/1898547

Title:
  neutron-linuxbridge-agent fails to start with iptables 1.8.5

Status in Ubuntu on IBM z Systems:
  Fix Committed
Status in iptables package in Ubuntu:
  Fix Committed
Status in neutron package in Ubuntu:
  Invalid
Status in iptables source package in Groovy:
  Fix Committed
Status in neutron source package in Groovy:
  Invalid
Status in iptables source package in Hirsute:
  Fix Committed
Status in neutron source package in Hirsute:
  Invalid

Bug description:
  [Impact]

  With iptables 1.8.5 neutron-linuxbridge-agent fails to properly start.

  The log file shows many errors like:

  2020-10-05 10:20:37.998 551 ERROR
  neutron.plugins.ml2.drivers.agent._common_agent ; Stdout: ; Stderr:
  iptables-restore: line 29 failed

  This can be demonstrated with a simple test case:

  iptables-restore 

[Touch-packages] [Bug 1898547] Re: neutron-linuxbridge-agent fails to start with iptables 1.8.5

[Albert Damen]

I could reproduce the issue by building git v1.8.5 and the issue was
fixed after cherry-picking "iptables-nft: fix basechain policy
configuration"

$ git log
commit 8d985eb4eb7a23fd98b75d71179af40169144cc5 (HEAD -> bug1898547)
Author: Pablo Neira Ayuso 
Date:   Fri Oct 2 13:44:36 2020 +0200

iptables-nft: fix basechain policy configuration

Previous to this patch, the basechain policy could not be properly
configured if it wasn't explictly set when loading the ruleset, leading
to iptables-nft-restore (and ip6tables-nft-restore) trying to send an
invalid ruleset to the kernel.

Signed-off-by: Arturo Borrero Gonzalez 
Signed-off-by: Pablo Neira Ayuso 

commit 14ac250946289e280fb09ef978a45042871275b0 (tag: v1.8.5)
Author: Pablo Neira Ayuso 
Date:   Wed Jun 3 11:37:52 2020 +0200

configure: bump version for 1.8.5 release

Signed-off-by: Pablo Neira Ayuso 


** Also affects: iptables (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to iptables in Ubuntu.
https://bugs.launchpad.net/bugs/1898547

Title:
  neutron-linuxbridge-agent fails to start with iptables 1.8.5

Status in iptables package in Ubuntu:
  New
Status in neutron package in Ubuntu:
  Invalid

Bug description:
  Ubuntu Groovy (20.10)
  kernel 5.8.0-20-generic
  neutron-linuxbridge-agent: 2:17.0.0~git2020091014.215a541bd4-0ubuntu1
  iptables: 1.8.5-3ubuntu1 (nf_tables)
  iptables-restore points to xtables-nft-multi

  After upgrading iptables from 1.8.4 to 1.8.5 and rebooting the neutron 
network node, neutron-linuxbridge-agent didn't properly start anymore.
  The log file shows many errors like:

  2020-10-05 10:20:37.998 551 ERROR
  neutron.plugins.ml2.drivers.agent._common_agent ; Stdout: ; Stderr:
  iptables-restore: line 29 failed

  Downgrading iptables to 1.8.4 solves the problem.

  Trying to do what the linuxbridge agent does:
  2020-10-05 10:20:37.998 551 ERROR 
neutron.plugins.ml2.drivers.agent._common_agent *filter
  2020-10-05 10:20:37.998 551 ERROR 
neutron.plugins.ml2.drivers.agent._common_agent :FORWARD - [0:0]

  shows that

  iptables-restore 

[Touch-packages] [Bug 1882376] [NEW] Can't connect to external audio TaoTronics TT-BA07

[Albert Cardona]

Public bug reported:

>From my iphone and chromebook I can see the external speakers plugged to
a TaoTronics TT-BA07 bluetooth device.

But from Ubuntu 20.04, the device doesn't appear listed in the settings.
There is listed a deviced named "1" that, when connecting to, appears to
be a sound device, but from the sound settings "test" buttons I can't
get any sound to play.

Any hints as to how I could triage this issue and collect more details?

ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: bluez 5.53-0ubuntu3
ProcVersionSignature: Ubuntu 5.4.0-33.37-generic 5.4.34
Uname: Linux 5.4.0-33-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.2
Architecture: amd64
CasperMD5CheckResult: skip
CurrentDesktop: ubuntu:GNOME
Date: Sat Jun  6 17:22:16 2020
EcryptfsInUse: Yes
InstallationDate: Installed on 2016-06-24 (1442 days ago)
InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1)
InterestingModules: rfcomm bnep btusb bluetooth
Lsusb:
 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
 Bus 001 Device 003: ID 04ca:705a Lite-On Technology Corp. Integrated Camera
 Bus 001 Device 006: ID 8087:0a2b Intel Corp. 
 Bus 001 Device 004: ID 056a:5040 Wacom Co., Ltd Pen and multitouch sensor
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: LENOVO 20FQCTO1WW
ProcEnviron:
 TERM=xterm-256color
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=en_US.UTF-8
 SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-33-generic 
root=UUID=972ac4f9-34e5-4cf0-a6ba-2fa4322fd70a ro quiet splash vt.handoff=7
SourcePackage: bluez
UpgradeStatus: Upgraded to focal on 2020-05-20 (17 days ago)
dmi.bios.date: 04/18/2016
dmi.bios.vendor: LENOVO
dmi.bios.version: N1FET40W (1.14 )
dmi.board.asset.tag: Not Available
dmi.board.name: 20FQCTO1WW
dmi.board.vendor: LENOVO
dmi.board.version: SDK0J40709 WIN
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: None
dmi.modalias: 
dmi:bvnLENOVO:bvrN1FET40W(1.14):bd04/18/2016:svnLENOVO:pn20FQCTO1WW:pvrThinkPadX1Yoga1st:rvnLENOVO:rn20FQCTO1WW:rvrSDK0J40709WIN:cvnLENOVO:ct10:cvrNone:
dmi.product.family: ThinkPad X1 Yoga 1st
dmi.product.name: 20FQCTO1WW
dmi.product.sku: LENOVO_MT_20FQ_BU_Think_FM_ThinkPad X1 Yoga 1st
dmi.product.version: ThinkPad X1 Yoga 1st
dmi.sys.vendor: LENOVO
hciconfig:
 hci0:  Type: Primary  Bus: USB
BD Address: E4:B3:18:78:A6:5D  ACL MTU: 1021:4  SCO MTU: 96:6
UP RUNNING PSCAN ISCAN INQUIRY 
RX bytes:43684 acl:117 sco:0 events:3823 errors:0
TX bytes:705943 acl:202 sco:0 commands:2991 errors:0

** Affects: bluez (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug focal

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1882376

Title:
  Can't connect to external audio TaoTronics TT-BA07

Status in bluez package in Ubuntu:
  New

Bug description:
  From my iphone and chromebook I can see the external speakers plugged
  to a TaoTronics TT-BA07 bluetooth device.

  But from Ubuntu 20.04, the device doesn't appear listed in the
  settings. There is listed a deviced named "1" that, when connecting
  to, appears to be a sound device, but from the sound settings "test"
  buttons I can't get any sound to play.

  Any hints as to how I could triage this issue and collect more
  details?

  ProblemType: Bug
  DistroRelease: Ubuntu 20.04
  Package: bluez 5.53-0ubuntu3
  ProcVersionSignature: Ubuntu 5.4.0-33.37-generic 5.4.34
  Uname: Linux 5.4.0-33-generic x86_64
  ApportVersion: 2.20.11-0ubuntu27.2
  Architecture: amd64
  CasperMD5CheckResult: skip
  CurrentDesktop: ubuntu:GNOME
  Date: Sat Jun  6 17:22:16 2020
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2016-06-24 (1442 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  InterestingModules: rfcomm bnep btusb bluetooth
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 04ca:705a Lite-On Technology Corp. Integrated Camera
   Bus 001 Device 006: ID 8087:0a2b Intel Corp. 
   Bus 001 Device 004: ID 056a:5040 Wacom Co., Ltd Pen and multitouch sensor
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 20FQCTO1WW
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-33-generic 
root=UUID=972ac4f9-34e5-4cf0-a6ba-2fa4322fd70a ro quiet splash vt.handoff=7
  SourcePackage: bluez
  UpgradeStatus: Upgraded to focal on 2020-05-20 (17 days ago)
  dmi.bios.date: 04/18/2016
  dmi.bios.vendor: LENOVO
  dmi.bios.version: N1FET40W (1.14 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20FQCTO1WW
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0J40709 WIN
  dmi.chassis.asset.tag: No Asset 

[Touch-packages] [Bug 1881199] Re: [SoundCore mini, playback] No sound at all from Rhythmbox

[Albert Cardona]

Thank you very much, your suggestion solved the issue: rhythmbox can now
play via bluetooth.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1881199

Title:
  [SoundCore mini, playback] No sound at all from Rhythmbox

Status in pulseaudio package in Ubuntu:
  Incomplete

Bug description:
  After connecting via bluetooth the Soundcore Mini, I can get sound to
  play through it just fine from e.g. the Chromium browser, but not from
  Rhythmbox, which instead always plays from the laptop's internal
  speakrs.

  In the bluetooth settings, Soundcore Mini is connected. In the sound
  settings, Soundcore Mini is selected, and the "Test" button opens an
  UI that lets me play test sounds, and it works. And indeed it works
  for e.g. Google Chrome for a youtube video. But Rhythmbox plays
  through the internal speakers no matter what. I've tried restarting
  Rhythmbox, removing the ~/.pulse_secure/pulse/ folder with settings
  and then running "pulseaudio -k", and then restarting Rhythmbox, to no
  avail.

  ProblemType: Bug
  DistroRelease: Ubuntu 20.04
  Package: pulseaudio 1:13.99.1-1ubuntu3.2
  ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34
  Uname: Linux 5.4.0-31-generic x86_64
  ApportVersion: 2.20.11-0ubuntu27
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  albert120462 F pulseaudio
   /dev/snd/pcmC0D0c:   albert120462 F...m pulseaudio
  CasperMD5CheckResult: skip
  CurrentDesktop: ubuntu:GNOME
  Date: Thu May 28 22:00:38 2020
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2016-06-24 (1434 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  SourcePackage: pulseaudio
  Symptom: audio
  Symptom_Card: SoundCore mini
  Symptom_DevicesInUse:
   Cannot stat file /proc/43906/fd/6: Permission denied
USERPID ACCESS COMMAND
   /dev/snd/controlC0:  albert120462 F pulseaudio
   /dev/snd/pcmC0D0c:   albert120462 F...m pulseaudio
  Symptom_Type: No sound at all
  Title: [SoundCore mini, playback] No sound at all
  UpgradeStatus: Upgraded to focal on 2020-05-20 (8 days ago)
  dmi.bios.date: 04/18/2016
  dmi.bios.vendor: LENOVO
  dmi.bios.version: N1FET40W (1.14 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20FQCTO1WW
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0J40709 WIN
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: None
  dmi.modalias: 
dmi:bvnLENOVO:bvrN1FET40W(1.14):bd04/18/2016:svnLENOVO:pn20FQCTO1WW:pvrThinkPadX1Yoga1st:rvnLENOVO:rn20FQCTO1WW:rvrSDK0J40709WIN:cvnLENOVO:ct10:cvrNone:
  dmi.product.family: ThinkPad X1 Yoga 1st
  dmi.product.name: 20FQCTO1WW
  dmi.product.sku: LENOVO_MT_20FQ_BU_Think_FM_ThinkPad X1 Yoga 1st
  dmi.product.version: ThinkPad X1 Yoga 1st
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1881199/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1881199] [NEW] [SoundCore mini, playback] No sound at all from Rhythmbox

[Albert Cardona]

Public bug reported:

After connecting via bluetooth the Soundcore Mini, I can get sound to
play through it just fine from e.g. the Chromium browser, but not from
Rhythmbox, which instead always plays from the laptop's internal
speakrs.

In the bluetooth settings, Soundcore Mini is connected. In the sound
settings, Soundcore Mini is selected, and the "Test" button opens an UI
that lets me play test sounds, and it works. And indeed it works for
e.g. Google Chrome for a youtube video. But Rhythmbox plays through the
internal speakers no matter what. I've tried restarting Rhythmbox,
removing the ~/.pulse_secure/pulse/ folder with settings and then
running "pulseaudio -k", and then restarting Rhythmbox, to no avail.

ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: pulseaudio 1:13.99.1-1ubuntu3.2
ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34
Uname: Linux 5.4.0-31-generic x86_64
ApportVersion: 2.20.11-0ubuntu27
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  albert120462 F pulseaudio
 /dev/snd/pcmC0D0c:   albert120462 F...m pulseaudio
CasperMD5CheckResult: skip
CurrentDesktop: ubuntu:GNOME
Date: Thu May 28 22:00:38 2020
EcryptfsInUse: Yes
InstallationDate: Installed on 2016-06-24 (1434 days ago)
InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1)
SourcePackage: pulseaudio
Symptom: audio
Symptom_Card: SoundCore mini
Symptom_DevicesInUse:
 Cannot stat file /proc/43906/fd/6: Permission denied
  USERPID ACCESS COMMAND
 /dev/snd/controlC0:  albert120462 F pulseaudio
 /dev/snd/pcmC0D0c:   albert120462 F...m pulseaudio
Symptom_Type: No sound at all
Title: [SoundCore mini, playback] No sound at all
UpgradeStatus: Upgraded to focal on 2020-05-20 (8 days ago)
dmi.bios.date: 04/18/2016
dmi.bios.vendor: LENOVO
dmi.bios.version: N1FET40W (1.14 )
dmi.board.asset.tag: Not Available
dmi.board.name: 20FQCTO1WW
dmi.board.vendor: LENOVO
dmi.board.version: SDK0J40709 WIN
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: None
dmi.modalias: 
dmi:bvnLENOVO:bvrN1FET40W(1.14):bd04/18/2016:svnLENOVO:pn20FQCTO1WW:pvrThinkPadX1Yoga1st:rvnLENOVO:rn20FQCTO1WW:rvrSDK0J40709WIN:cvnLENOVO:ct10:cvrNone:
dmi.product.family: ThinkPad X1 Yoga 1st
dmi.product.name: 20FQCTO1WW
dmi.product.sku: LENOVO_MT_20FQ_BU_Think_FM_ThinkPad X1 Yoga 1st
dmi.product.version: ThinkPad X1 Yoga 1st
dmi.sys.vendor: LENOVO

** Affects: pulseaudio (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug focal

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1881199

Title:
  [SoundCore mini, playback] No sound at all from Rhythmbox

Status in pulseaudio package in Ubuntu:
  New

Bug description:
  After connecting via bluetooth the Soundcore Mini, I can get sound to
  play through it just fine from e.g. the Chromium browser, but not from
  Rhythmbox, which instead always plays from the laptop's internal
  speakrs.

  In the bluetooth settings, Soundcore Mini is connected. In the sound
  settings, Soundcore Mini is selected, and the "Test" button opens an
  UI that lets me play test sounds, and it works. And indeed it works
  for e.g. Google Chrome for a youtube video. But Rhythmbox plays
  through the internal speakers no matter what. I've tried restarting
  Rhythmbox, removing the ~/.pulse_secure/pulse/ folder with settings
  and then running "pulseaudio -k", and then restarting Rhythmbox, to no
  avail.

  ProblemType: Bug
  DistroRelease: Ubuntu 20.04
  Package: pulseaudio 1:13.99.1-1ubuntu3.2
  ProcVersionSignature: Ubuntu 5.4.0-31.35-generic 5.4.34
  Uname: Linux 5.4.0-31-generic x86_64
  ApportVersion: 2.20.11-0ubuntu27
  Architecture: amd64
  AudioDevicesInUse:
   USER    PID ACCESS COMMAND
   /dev/snd/controlC0:  albert    120462 F pulseaudio
   /dev/snd/pcmC0D0c:   albert120462 F...m pulseaudio
  CasperMD5CheckResult: skip
  CurrentDesktop: ubuntu:GNOME
  Date: Thu May 28 22:00:38 2020
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2016-06-24 (1434 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  SourcePackage: pulseaudio
  Symptom: audio
  Symptom_Card: SoundCore mini
  Symptom_DevicesInUse:
   Cannot stat file /proc/43906/fd/6: Permission denied
    USERPID ACCESS COMMAND
   /dev/snd/controlC0:  albert120462 F pulseaudio
   /dev/snd/pcmC0D0c:   albert120462 F...m pulseaudio
  Symptom_Type: No sound at all
  Title: [SoundCore mini, playback] No sound at all
  UpgradeStatus: Upgraded to focal on 2020-05-20 (8 days ago)
  dmi.bios.date: 04/18/2016
  dmi.bios.vendor: LENOVO
  dmi.bios.version: N1FET40W (1.14 )
  dmi.board.asset.tag: Not Avail

[Touch-packages] [Bug 1851806] Re: 'module' object has no attribute 'O_PATH'

[Albert Pool]

The above looks like some Python 3 code ended up in a Python 2.7
document, given opener= was added in Python 3.3 it seems.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1851806

Title:
  'module' object has no attribute 'O_PATH'

Status in apport package in Ubuntu:
  Confirmed

Bug description:
  I encountered the following exception in python-apport while
  encountering an exception `bup` which uses `python-apport`. I'm sure
  that the exception lies in the responsibility of `python-apport` (the
  `AttributeError` stacktrace is relevant):

  ```
  Traceback (most recent call last):
File "/usr/lib/bup/cmd/bup-index", line 269, in 
  update_index(rp, excluded_paths, exclude_rxs, xdev_exceptions=xexcept)
File "/usr/lib/bup/cmd/bup-index", line 191, in update_index
  mi.close()
File "/usr/lib/bup/bup/index.py", line 528, in close
  os.rename(self.tmpname, self.filename)
  OSError: [Errno 13] Permission denied
  Error in sys.excepthook:
  Traceback (most recent call last):
File "/usr/lib/bup/bup/helpers.py", line 916, in newhook
  return oldhook(exctype, value, traceback)
File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 109, in 
apport_excepthook
  pr.add_proc_info(extraenv=['PYTHONPATH', 'PYTHONHOME'])
File "/usr/lib/python2.7/dist-packages/apport/report.py", line 544, in 
add_proc_info
  proc_pid_fd = os.open('/proc/%s' % pid, os.O_RDONLY | os.O_PATH | 
os.O_DIRECTORY)
  AttributeError: 'module' object has no attribute 'O_PATH'

  Original exception was:
  Traceback (most recent call last):
File "/usr/lib/bup/cmd/bup-index", line 269, in 
  update_index(rp, excluded_paths, exclude_rxs, xdev_exceptions=xexcept)
File "/usr/lib/bup/cmd/bup-index", line 191, in update_index
  mi.close()
File "/usr/lib/bup/bup/index.py", line 528, in close
  os.rename(self.tmpname, self.filename)
  OSError: [Errno 13] Permission denied
  ```

  ProblemType: Bug
  DistroRelease: Ubuntu 19.10
  Package: python-apport 2.20.11-0ubuntu8.2
  ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1
  Uname: Linux 5.3.0-19-generic x86_64
  NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair
  ApportLog: Error: [Errno 13] Keine Berechtigung: '/var/log/apport.log'
  ApportVersion: 2.20.11-0ubuntu8.2
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  Date: Fri Nov  8 10:43:02 2019
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: Upgraded to eoan on 2019-10-25 (13 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1851806/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1851806] Re: 'module' object has no attribute 'O_PATH'

[Albert Pool]

Simply removing O_PATH from the line in question leads to:

Traceback (most recent call last):
  File "/usr/share/apport/apport-gtk", line 597, in 
app.run_argv()
  File "/usr/lib/python2.7/dist-packages/apport/ui.py", line 661, in run_argv
return self.run_update_report()
  File "/usr/lib/python2.7/dist-packages/apport/ui.py", line 559, in 
run_update_report
self.report.add_proc_environ()
  File "/usr/lib/python2.7/dist-packages/apport/report.py", line 592, in 
add_proc_environ
env = _read_file('environ', dir_fd=proc_pid_fd).replace('\n', '\\n')
  File "/usr/lib/python2.7/dist-packages/apport/report.py", line 73, in 
_read_file
with open(path, 'rb', opener=lambda path, mode: os.open(path, mode, 
dir_fd=dir_fd)) as fd:
TypeError: 'opener' is an invalid keyword argument for this function

(Linux Mint 18.2, python-apport 2.20.1-0ubuntu2.21)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1851806

Title:
  'module' object has no attribute 'O_PATH'

Status in apport package in Ubuntu:
  Confirmed

Bug description:
  I encountered the following exception in python-apport while
  encountering an exception `bup` which uses `python-apport`. I'm sure
  that the exception lies in the responsibility of `python-apport` (the
  `AttributeError` stacktrace is relevant):

  ```
  Traceback (most recent call last):
File "/usr/lib/bup/cmd/bup-index", line 269, in 
  update_index(rp, excluded_paths, exclude_rxs, xdev_exceptions=xexcept)
File "/usr/lib/bup/cmd/bup-index", line 191, in update_index
  mi.close()
File "/usr/lib/bup/bup/index.py", line 528, in close
  os.rename(self.tmpname, self.filename)
  OSError: [Errno 13] Permission denied
  Error in sys.excepthook:
  Traceback (most recent call last):
File "/usr/lib/bup/bup/helpers.py", line 916, in newhook
  return oldhook(exctype, value, traceback)
File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 109, in 
apport_excepthook
  pr.add_proc_info(extraenv=['PYTHONPATH', 'PYTHONHOME'])
File "/usr/lib/python2.7/dist-packages/apport/report.py", line 544, in 
add_proc_info
  proc_pid_fd = os.open('/proc/%s' % pid, os.O_RDONLY | os.O_PATH | 
os.O_DIRECTORY)
  AttributeError: 'module' object has no attribute 'O_PATH'

  Original exception was:
  Traceback (most recent call last):
File "/usr/lib/bup/cmd/bup-index", line 269, in 
  update_index(rp, excluded_paths, exclude_rxs, xdev_exceptions=xexcept)
File "/usr/lib/bup/cmd/bup-index", line 191, in update_index
  mi.close()
File "/usr/lib/bup/bup/index.py", line 528, in close
  os.rename(self.tmpname, self.filename)
  OSError: [Errno 13] Permission denied
  ```

  ProblemType: Bug
  DistroRelease: Ubuntu 19.10
  Package: python-apport 2.20.11-0ubuntu8.2
  ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1
  Uname: Linux 5.3.0-19-generic x86_64
  NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair
  ApportLog: Error: [Errno 13] Keine Berechtigung: '/var/log/apport.log'
  ApportVersion: 2.20.11-0ubuntu8.2
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  Date: Fri Nov  8 10:43:02 2019
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: Upgraded to eoan on 2019-10-25 (13 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1851806/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1807432] [NEW] /proc/diskstats does not rollup queue depth from partitions

[Albert Autin]

Public bug reported:

Tested in Ubuntu 18.04LTS and Ubuntu 18.10, with the same result. The
queue size rollup works in Centos 7 though.

root@vagrant:~# uname -a
Linux vagrant 4.18.0-12-generic #13-Ubuntu SMP Wed Nov 14 15:17:05 UTC 2018 
x86_64 x86_64 x86_64 GNU/Linux

root@vagrant:~# lsb_release -rd
Description:Ubuntu 18.10
Release:18.10

root@vagrant:~# cat /proc/diskstats 
   7   0 loop0 5 0 16 0 0 0 0 0 0 0 0
   7   1 loop1 0 0 0 0 0 0 0 0 0 0 0
   7   2 loop2 0 0 0 0 0 0 0 0 0 0 0
   7   3 loop3 0 0 0 0 0 0 0 0 0 0 0
   7   4 loop4 0 0 0 0 0 0 0 0 0 0 0
   7   5 loop5 0 0 0 0 0 0 0 0 0 0 0
   7   6 loop6 0 0 0 0 0 0 0 0 0 0 0
   7   7 loop7 0 0 0 0 0 0 0 0 0 0 0
 259   0 nvme0n1 813340 0 10963704 274028 4075 44 1040576 46884 0 18012 
908472
 259   5 nvme0n1p1 203838 0 2749463 65696 986 0 252416 11696 13 14360 218028
 259   6 nvme0n1p2 202672 0 2713358 67924 1015 0 259840 11696 20 14372 
220388
 259   7 nvme0n1p3 202961 0 2717301 70464 1034 0 264704 11652 19 14344 
226248
 259   8 nvme0n1p4 203216 0 2730974 69944 1028 0 263168 11840 16 14340 
224992
   8   0 sda 11622 783 612090 16416 6529 9730 607624 52912 0 7964 76940
   8   1 sda1 11543 783 607954 16408 4731 9730 607624 52844 0 7380 76304
 253   0 dm-0 12083 0 598666 25540 16198 0 613808 137252 0 7936 162808
 253   1 dm-1 186 0 8696 104 0 0 0 0 0 80 104

We expect the queue depth of 'nvme0n1' to increase when the partitions
it has increase, but this never happens.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: Incomplete


** Tags: cosmic disk diskstats queue

** Package changed: apport (Ubuntu) => ubuntu

** Package changed: ubuntu => linux (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1807432

Title:
  /proc/diskstats does not rollup queue depth from partitions

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Tested in Ubuntu 18.04LTS and Ubuntu 18.10, with the same result. The
  queue size rollup works in Centos 7 though.

  root@vagrant:~# uname -a
  Linux vagrant 4.18.0-12-generic #13-Ubuntu SMP Wed Nov 14 15:17:05 UTC 2018 
x86_64 x86_64 x86_64 GNU/Linux

  root@vagrant:~# lsb_release -rd
  Description:Ubuntu 18.10
  Release:18.10

  root@vagrant:~# cat /proc/diskstats 
 7   0 loop0 5 0 16 0 0 0 0 0 0 0 0
 7   1 loop1 0 0 0 0 0 0 0 0 0 0 0
 7   2 loop2 0 0 0 0 0 0 0 0 0 0 0
 7   3 loop3 0 0 0 0 0 0 0 0 0 0 0
 7   4 loop4 0 0 0 0 0 0 0 0 0 0 0
 7   5 loop5 0 0 0 0 0 0 0 0 0 0 0
 7   6 loop6 0 0 0 0 0 0 0 0 0 0 0
 7   7 loop7 0 0 0 0 0 0 0 0 0 0 0
   259   0 nvme0n1 813340 0 10963704 274028 4075 44 1040576 46884 0 18012 
908472
   259   5 nvme0n1p1 203838 0 2749463 65696 986 0 252416 11696 13 14360 
218028
   259   6 nvme0n1p2 202672 0 2713358 67924 1015 0 259840 11696 20 14372 
220388
   259   7 nvme0n1p3 202961 0 2717301 70464 1034 0 264704 11652 19 14344 
226248
   259   8 nvme0n1p4 203216 0 2730974 69944 1028 0 263168 11840 16 14340 
224992
 8   0 sda 11622 783 612090 16416 6529 9730 607624 52912 0 7964 76940
 8   1 sda1 11543 783 607954 16408 4731 9730 607624 52844 0 7380 76304
   253   0 dm-0 12083 0 598666 25540 16198 0 613808 137252 0 7936 162808
   253   1 dm-1 186 0 8696 104 0 0 0 0 0 80 104

  We expect the queue depth of 'nvme0n1' to increase when the partitions
  it has increase, but this never happens.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1807432/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1288182]

[Albert Astals Cid]

You are wasting previous time of people working on poppler doing such a
useless comment, please refrain from commenting on the future unless you
can add something useful to the discussion.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to poppler in Ubuntu.
https://bugs.launchpad.net/bugs/1288182

Title:
  Cyrillic not displayed in the input field

Status in Evince:
  Unknown
Status in Poppler:
  Unknown
Status in evince package in Ubuntu:
  Triaged
Status in poppler package in Ubuntu:
  Invalid

Bug description:
  Ubuntu 14.04 x64
  Evince 3.10.3
  Cyrillic not displayed in the input field.

  In attach screenshot: input field with text 'This сyrillic:
  "Кириллица"'

  Upd.

  Still actual for Ubuntu 16.04 x64
  Evince 3.18.2

To manage notifications about this bug go to:
https://bugs.launchpad.net/evince/+bug/1288182/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1756846] Re: bridge-utils incompatible with ifupdown on bionic

[Albert Damen]

apt-cache show bridge-utils | grep -E "Pack|Vers|Confl"
Package: bridge-utils
Version: 1.5-15ubuntu1
Conflicts: ifupdown (<< 0.8.17)

So that conflict applies to ifupdown 0.8.16ubuntu2 in Bionic

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bridge-utils in Ubuntu.
https://bugs.launchpad.net/bugs/1756846

Title:
  bridge-utils incompatible with ifupdown on bionic

Status in bridge-utils package in Ubuntu:
  Confirmed

Bug description:
  $ apt-cache policy ifupdown bridge-utils
  ifupdown:
Installed: (none)
Candidate: 0.8.16ubuntu2
Version table:
   0.8.16ubuntu2 500
  500 http://gb.archive.ubuntu.com/ubuntu bionic/main amd64 Packages
  100 /var/lib/dpkg/status
  bridge-utils:
Installed: 1.5-15ubuntu1
Candidate: 1.5-15ubuntu1
Version table:
   *** 1.5-15ubuntu1 500
  500 http://gb.archive.ubuntu.com/ubuntu bionic/main amd64 Packages
  100 /var/lib/dpkg/status

  $ sudo apt-get install ifupdown
  Reading package lists... Done
  Building dependency tree   
  Reading state information... Done
  Suggested packages:
rdnssd
  The following packages will be REMOVED
bridge-utils
  The following NEW packages will be installed
ifupdown
  0 to upgrade, 1 to newly install, 1 to remove and 0 not to upgrade.
  Need to get 55.2 kB of archives.
  After this operation, 119 kB of additional disk space will be used.
  Do you want to continue? [Y/n] y
  Get:1 http://gb.archive.ubuntu.com/ubuntu bionic/main amd64 ifupdown amd64 
0.8.16ubuntu2 [55.2 kB]
  Fetched 55.2 kB in 0s (1,280 kB/s)  
  (Reading database ... 251311 files and directories currently installed.)
  Removing bridge-utils (1.5-15ubuntu1) ...
  Selecting previously unselected package ifupdown.
  (Reading database ... 251286 files and directories currently installed.)
  Preparing to unpack .../ifupdown_0.8.16ubuntu2_amd64.deb ...
  Unpacking ifupdown (0.8.16ubuntu2) ...
  Setting up ifupdown (0.8.16ubuntu2) ...
  Processing triggers for ureadahead (0.100.0-20) ...
  ureadahead will be reprofiled on next reboot
  Processing triggers for systemd (237-3ubuntu4) ...
  Processing triggers for man-db (2.8.2-1) ...

  $ sudo apt-get install bridge-utils
  Reading package lists... Done
  Building dependency tree   
  Reading state information... Done
  Suggested packages:
ifupdown
  The following packages will be REMOVED
ifupdown
  The following NEW packages will be installed
bridge-utils
  0 to upgrade, 1 to newly install, 1 to remove and 0 not to upgrade.
  Need to get 0 B/30.1 kB of archives.
  After this operation, 119 kB disk space will be freed.
  Do you want to continue? [Y/n] y
  (Reading database ... 251318 files and directories currently installed.)
  Removing ifupdown (0.8.16ubuntu2) ...
  Selecting previously unselected package bridge-utils.
  (Reading database ... 251286 files and directories currently installed.)
  Preparing to unpack .../bridge-utils_1.5-15ubuntu1_amd64.deb ...
  Unpacking bridge-utils (1.5-15ubuntu1) ...
  Setting up bridge-utils (1.5-15ubuntu1) ...
  Processing triggers for man-db (2.8.2-1) ...

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bridge-utils/+bug/1756846/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Touch-packages] [Bug 1716350] Re: package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting conf

[Albert Dezso]

Thank you for your ansver, your suggestion help me. Thank's again.

2017-09-11 21:07 GMT+03:00 Andreas Hasenack :

> Thanks for filing this bug in Ubuntu.
>
> dpkg: error processing package libk5crypto3:amd64 (--configure):
>  package is in a very bad inconsistent state; you should
>  reinstall it before attempting configuration
>
> Could you please try reinstalling that package via these commands:
>
> sudo apt update
> sudo apt install --reinstall libk5crypto3:amd64
>
> Let us know how it goes.
>
> Thanks
>
>
> ** Changed in: krb5 (Ubuntu)
>Status: New => Incomplete
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1716350
>
> Title:
>   package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade:
>   package is in a very bad inconsistent state; you should  reinstall it
>   before attempting configuration
>
> Status in krb5 package in Ubuntu:
>   Incomplete
>
> Bug description:
>   Hello, i dont have further info.
>
>   ProblemType: Package
>   DistroRelease: Ubuntu 17.04
>   Package: libk5crypto3:amd64 1.15-1ubuntu0.1
>   ProcVersionSignature: Ubuntu 4.10.0-32.36-generic 4.10.17
>   Uname: Linux 4.10.0-32-generic x86_64
>   ApportVersion: 2.20.4-0ubuntu4.5
>   Architecture: amd64
>   Date: Mon Sep 11 12:01:24 2017
>   Dependencies:
>gcc-6-base 6.3.0-12ubuntu2
>libc6 2.24-9ubuntu2.2
>libgcc1 1:6.3.0-12ubuntu2
>libkrb5support0 1.15-1ubuntu0.1
>   DuplicateSignature:
>package:libk5crypto3:amd64:1.15-1ubuntu0.1
>Setting up libwbclient0:amd64 (2:4.5.8+dfsg-0ubuntu0.17.04.6) ...
>dpkg: error processing package libk5crypto3:amd64 (--configure):
> package is in a very bad inconsistent state; you should
>   ErrorMessage: package is in a very bad inconsistent state; you should
> reinstall it before attempting configuration
>   InstallationDate: Installed on 2017-05-31 (102 days ago)
>   InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
>   RelatedPackageVersions:
>dpkg 1.18.10ubuntu2
>apt  1.4
>   SourcePackage: krb5
>   Title: package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to
> install/upgrade: package is in a very bad inconsistent state; you should
> reinstall it before attempting configuration
>   UpgradeStatus: No upgrade log present (probably fresh install)
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/1716350/+subscriptions
>

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to krb5 in Ubuntu.
https://bugs.launchpad.net/bugs/1716350

Title:
  package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade:
  package is in a very bad inconsistent state; you should  reinstall it
  before attempting configuration

Status in krb5 package in Ubuntu:
  Incomplete

Bug description:
  Hello, i dont have further info.

  ProblemType: Package
  DistroRelease: Ubuntu 17.04
  Package: libk5crypto3:amd64 1.15-1ubuntu0.1
  ProcVersionSignature: Ubuntu 4.10.0-32.36-generic 4.10.17
  Uname: Linux 4.10.0-32-generic x86_64
  ApportVersion: 2.20.4-0ubuntu4.5
  Architecture: amd64
  Date: Mon Sep 11 12:01:24 2017
  Dependencies:
   gcc-6-base 6.3.0-12ubuntu2
   libc6 2.24-9ubuntu2.2
   libgcc1 1:6.3.0-12ubuntu2
   libkrb5support0 1.15-1ubuntu0.1
  DuplicateSignature:
   package:libk5crypto3:amd64:1.15-1ubuntu0.1
   Setting up libwbclient0:amd64 (2:4.5.8+dfsg-0ubuntu0.17.04.6) ...
   dpkg: error processing package libk5crypto3:amd64 (--configure):
package is in a very bad inconsistent state; you should
  ErrorMessage: package is in a very bad inconsistent state; you should  
reinstall it before attempting configuration
  InstallationDate: Installed on 2017-05-31 (102 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  RelatedPackageVersions:
   dpkg 1.18.10ubuntu2
   apt  1.4
  SourcePackage: krb5
  Title: package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade: 
package is in a very bad inconsistent state; you should  reinstall it before 
attempting configuration
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/1716350/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1716350] [NEW] package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting confi

[Albert Dezso]

Public bug reported:

Hello, i dont have further info.

ProblemType: Package
DistroRelease: Ubuntu 17.04
Package: libk5crypto3:amd64 1.15-1ubuntu0.1
ProcVersionSignature: Ubuntu 4.10.0-32.36-generic 4.10.17
Uname: Linux 4.10.0-32-generic x86_64
ApportVersion: 2.20.4-0ubuntu4.5
Architecture: amd64
Date: Mon Sep 11 12:01:24 2017
Dependencies:
 gcc-6-base 6.3.0-12ubuntu2
 libc6 2.24-9ubuntu2.2
 libgcc1 1:6.3.0-12ubuntu2
 libkrb5support0 1.15-1ubuntu0.1
DuplicateSignature:
 package:libk5crypto3:amd64:1.15-1ubuntu0.1
 Setting up libwbclient0:amd64 (2:4.5.8+dfsg-0ubuntu0.17.04.6) ...
 dpkg: error processing package libk5crypto3:amd64 (--configure):
  package is in a very bad inconsistent state; you should
ErrorMessage: package is in a very bad inconsistent state; you should  
reinstall it before attempting configuration
InstallationDate: Installed on 2017-05-31 (102 days ago)
InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
RelatedPackageVersions:
 dpkg 1.18.10ubuntu2
 apt  1.4
SourcePackage: krb5
Title: package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade: 
package is in a very bad inconsistent state; you should  reinstall it before 
attempting configuration
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: krb5 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package zesty

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to krb5 in Ubuntu.
https://bugs.launchpad.net/bugs/1716350

Title:
  package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade:
  package is in a very bad inconsistent state; you should  reinstall it
  before attempting configuration

Status in krb5 package in Ubuntu:
  New

Bug description:
  Hello, i dont have further info.

  ProblemType: Package
  DistroRelease: Ubuntu 17.04
  Package: libk5crypto3:amd64 1.15-1ubuntu0.1
  ProcVersionSignature: Ubuntu 4.10.0-32.36-generic 4.10.17
  Uname: Linux 4.10.0-32-generic x86_64
  ApportVersion: 2.20.4-0ubuntu4.5
  Architecture: amd64
  Date: Mon Sep 11 12:01:24 2017
  Dependencies:
   gcc-6-base 6.3.0-12ubuntu2
   libc6 2.24-9ubuntu2.2
   libgcc1 1:6.3.0-12ubuntu2
   libkrb5support0 1.15-1ubuntu0.1
  DuplicateSignature:
   package:libk5crypto3:amd64:1.15-1ubuntu0.1
   Setting up libwbclient0:amd64 (2:4.5.8+dfsg-0ubuntu0.17.04.6) ...
   dpkg: error processing package libk5crypto3:amd64 (--configure):
package is in a very bad inconsistent state; you should
  ErrorMessage: package is in a very bad inconsistent state; you should  
reinstall it before attempting configuration
  InstallationDate: Installed on 2017-05-31 (102 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  RelatedPackageVersions:
   dpkg 1.18.10ubuntu2
   apt  1.4
  SourcePackage: krb5
  Title: package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade: 
package is in a very bad inconsistent state; you should  reinstall it before 
attempting configuration
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/1716350/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1708912] [NEW] package gdbserver 7.11.1-0ubuntu1~16.5 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configura

[Albert Zick Olympus]

Public bug reported:

cannot install that

ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: gdbserver 7.11.1-0ubuntu1~16.5
ProcVersionSignature: Ubuntu 4.8.0-58.63~16.04.1-generic 4.8.17
Uname: Linux 4.8.0-58-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.10
Architecture: amd64
Date: Sun Aug  6 15:38:04 2017
Dependencies:
 gcc-6-base 6.0.1-0ubuntu1
 libc6 2.23-0ubuntu9
 libgcc1 1:6.0.1-0ubuntu1
DuplicateSignature:
 package:gdbserver:7.11.1-0ubuntu1~16.5
 Processing triggers for hicolor-icon-theme (0.15-0ubuntu1) ...
 dpkg: error processing package gdbserver (--configure):
  package is in a very bad inconsistent state; you should
ErrorMessage: package is in a very bad inconsistent state; you should  
reinstall it before attempting configuration
InstallationDate: Installed on 2017-06-25 (42 days ago)
InstallationMedia: Ubuntu 16.04.2 LTS "Xenial Xerus" - Release amd64 
(20170215.2)
RelatedPackageVersions:
 dpkg 1.18.4ubuntu1.2
 apt  1.2.20
SourcePackage: gdb
Title: package gdbserver 7.11.1-0ubuntu1~16.5 failed to install/upgrade: 
package is in a very bad inconsistent state; you should  reinstall it before 
attempting configuration
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: gdb (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package xenial

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gdb in Ubuntu.
https://bugs.launchpad.net/bugs/1708912

Title:
  package gdbserver 7.11.1-0ubuntu1~16.5 failed to install/upgrade:
  package is in a very bad inconsistent state; you should  reinstall it
  before attempting configuration

Status in gdb package in Ubuntu:
  New

Bug description:
  cannot install that

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: gdbserver 7.11.1-0ubuntu1~16.5
  ProcVersionSignature: Ubuntu 4.8.0-58.63~16.04.1-generic 4.8.17
  Uname: Linux 4.8.0-58-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.10
  Architecture: amd64
  Date: Sun Aug  6 15:38:04 2017
  Dependencies:
   gcc-6-base 6.0.1-0ubuntu1
   libc6 2.23-0ubuntu9
   libgcc1 1:6.0.1-0ubuntu1
  DuplicateSignature:
   package:gdbserver:7.11.1-0ubuntu1~16.5
   Processing triggers for hicolor-icon-theme (0.15-0ubuntu1) ...
   dpkg: error processing package gdbserver (--configure):
package is in a very bad inconsistent state; you should
  ErrorMessage: package is in a very bad inconsistent state; you should  
reinstall it before attempting configuration
  InstallationDate: Installed on 2017-06-25 (42 days ago)
  InstallationMedia: Ubuntu 16.04.2 LTS "Xenial Xerus" - Release amd64 
(20170215.2)
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.2
   apt  1.2.20
  SourcePackage: gdb
  Title: package gdbserver 7.11.1-0ubuntu1~16.5 failed to install/upgrade: 
package is in a very bad inconsistent state; you should  reinstall it before 
attempting configuration
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gdb/+bug/1708912/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1704831] [NEW] package libgssapi-krb5-2:amd64 1.15-1ubuntu0.1 failed to install/upgrade: függőségi hibák - e csomag beállítatlan maradt

[Albert Dezso]

Public bug reported:

No info

ProblemType: Package
DistroRelease: Ubuntu 17.04
Package: libgssapi-krb5-2:amd64 1.15-1ubuntu0.1
ProcVersionSignature: Ubuntu 4.10.0-26.30-generic 4.10.17
Uname: Linux 4.10.0-26-generic x86_64
ApportVersion: 2.20.4-0ubuntu4.4
Architecture: amd64
Date: Mon Jul 17 20:08:51 2017
ErrorMessage: függőségi hibák - e csomag beállítatlan maradt
InstallationDate: Installed on 2017-05-31 (47 days ago)
InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
RelatedPackageVersions:
 dpkg 1.18.10ubuntu2
 apt  1.4
SourcePackage: krb5
Title: package libgssapi-krb5-2:amd64 1.15-1ubuntu0.1 failed to 
install/upgrade: függőségi hibák - e csomag beállítatlan maradt
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: krb5 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package zesty

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to krb5 in Ubuntu.
https://bugs.launchpad.net/bugs/1704831

Title:
  package libgssapi-krb5-2:amd64 1.15-1ubuntu0.1 failed to
  install/upgrade: függőségi hibák - e csomag beállítatlan maradt

Status in krb5 package in Ubuntu:
  New

Bug description:
  No info

  ProblemType: Package
  DistroRelease: Ubuntu 17.04
  Package: libgssapi-krb5-2:amd64 1.15-1ubuntu0.1
  ProcVersionSignature: Ubuntu 4.10.0-26.30-generic 4.10.17
  Uname: Linux 4.10.0-26-generic x86_64
  ApportVersion: 2.20.4-0ubuntu4.4
  Architecture: amd64
  Date: Mon Jul 17 20:08:51 2017
  ErrorMessage: függőségi hibák - e csomag beállítatlan maradt
  InstallationDate: Installed on 2017-05-31 (47 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  RelatedPackageVersions:
   dpkg 1.18.10ubuntu2
   apt  1.4
  SourcePackage: krb5
  Title: package libgssapi-krb5-2:amd64 1.15-1ubuntu0.1 failed to 
install/upgrade: függőségi hibák - e csomag beállítatlan maradt
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/1704831/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1704747] [NEW] package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade: a csomag nagyon rossz, következetlen állapotban van - újra kell telepítenie a beállítási kís

[Albert Dezso]

Public bug reported:

I have no more info.

ProblemType: Package
DistroRelease: Ubuntu 17.04
Package: libk5crypto3:amd64 1.15-1ubuntu0.1
ProcVersionSignature: Ubuntu 4.10.0-26.30-generic 4.10.17
Uname: Linux 4.10.0-26-generic x86_64
ApportVersion: 2.20.4-0ubuntu4.1
Architecture: amd64
Date: Wed Jul  5 20:51:19 2017
Dependencies:
 gcc-6-base 6.3.0-12ubuntu2
 libc6 2.24-9ubuntu2.2
 libgcc1 1:6.3.0-12ubuntu2
 libkrb5support0 1.15-1ubuntu0.1
ErrorMessage: a csomag nagyon rossz, következetlen állapotban van - újra  kell 
telepítenie a beállítási kísérlet előtt
InstallationDate: Installed on 2017-05-31 (46 days ago)
InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
RelatedPackageVersions:
 dpkg 1.18.10ubuntu2
 apt  1.4
SourcePackage: krb5
Title: package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade: a 
csomag nagyon rossz, következetlen állapotban van - újra  kell telepítenie a 
beállítási kísérlet előtt
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: krb5 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package zesty

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to krb5 in Ubuntu.
https://bugs.launchpad.net/bugs/1704747

Title:
  package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade:
  a csomag nagyon rossz, következetlen állapotban van - újra  kell
  telepítenie a beállítási kísérlet előtt

Status in krb5 package in Ubuntu:
  New

Bug description:
  I have no more info.

  ProblemType: Package
  DistroRelease: Ubuntu 17.04
  Package: libk5crypto3:amd64 1.15-1ubuntu0.1
  ProcVersionSignature: Ubuntu 4.10.0-26.30-generic 4.10.17
  Uname: Linux 4.10.0-26-generic x86_64
  ApportVersion: 2.20.4-0ubuntu4.1
  Architecture: amd64
  Date: Wed Jul  5 20:51:19 2017
  Dependencies:
   gcc-6-base 6.3.0-12ubuntu2
   libc6 2.24-9ubuntu2.2
   libgcc1 1:6.3.0-12ubuntu2
   libkrb5support0 1.15-1ubuntu0.1
  ErrorMessage: a csomag nagyon rossz, következetlen állapotban van - újra  
kell telepítenie a beállítási kísérlet előtt
  InstallationDate: Installed on 2017-05-31 (46 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  RelatedPackageVersions:
   dpkg 1.18.10ubuntu2
   apt  1.4
  SourcePackage: krb5
  Title: package libk5crypto3:amd64 1.15-1ubuntu0.1 failed to install/upgrade: 
a csomag nagyon rossz, következetlen állapotban van - újra  kell telepítenie a 
beállítási kísérlet előtt
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/1704747/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1699683] [NEW] package libgssapi-krb5-2:amd64 1.15-1ubuntu0.1 failed to install/upgrade: függőségi hibák - e csomag beállítatlan maradt

[Albert Dezso]

Public bug reported:

i have no idea.

ProblemType: Package
DistroRelease: Ubuntu 17.04
Package: libgssapi-krb5-2:amd64 1.15-1ubuntu0.1
ProcVersionSignature: Ubuntu 4.10.0-24.28-generic 4.10.15
Uname: Linux 4.10.0-24-generic x86_64
ApportVersion: 2.20.4-0ubuntu4.1
AptOrdering:
 libnss3:amd64: Install
 NULL: ConfigurePending
Architecture: amd64
Date: Thu Jun 22 09:22:10 2017
ErrorMessage: függőségi hibák - e csomag beállítatlan maradt
InstallationDate: Installed on 2017-05-31 (21 days ago)
InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
RelatedPackageVersions:
 dpkg 1.18.10ubuntu2
 apt  1.4
SourcePackage: krb5
Title: package libgssapi-krb5-2:amd64 1.15-1ubuntu0.1 failed to 
install/upgrade: függőségi hibák - e csomag beállítatlan maradt
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: krb5 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package zesty

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to krb5 in Ubuntu.
https://bugs.launchpad.net/bugs/1699683

Title:
  package libgssapi-krb5-2:amd64 1.15-1ubuntu0.1 failed to
  install/upgrade: függőségi hibák - e csomag beállítatlan maradt

Status in krb5 package in Ubuntu:
  New

Bug description:
  i have no idea.

  ProblemType: Package
  DistroRelease: Ubuntu 17.04
  Package: libgssapi-krb5-2:amd64 1.15-1ubuntu0.1
  ProcVersionSignature: Ubuntu 4.10.0-24.28-generic 4.10.15
  Uname: Linux 4.10.0-24-generic x86_64
  ApportVersion: 2.20.4-0ubuntu4.1
  AptOrdering:
   libnss3:amd64: Install
   NULL: ConfigurePending
  Architecture: amd64
  Date: Thu Jun 22 09:22:10 2017
  ErrorMessage: függőségi hibák - e csomag beállítatlan maradt
  InstallationDate: Installed on 2017-05-31 (21 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  RelatedPackageVersions:
   dpkg 1.18.10ubuntu2
   apt  1.4
  SourcePackage: krb5
  Title: package libgssapi-krb5-2:amd64 1.15-1ubuntu0.1 failed to 
install/upgrade: függőségi hibák - e csomag beállítatlan maradt
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/1699683/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1493851] Re: Port to upstreamed versions of Audio Role patch

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: Albert Astals Cid (aacid) => (unassigned)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu-camera in Ubuntu.
https://bugs.launchpad.net/bugs/1493851

Title:
  Port to upstreamed versions of Audio Role patch

Status in Ubuntu Clock App:
  Fix Released
Status in dropping-letters package in Ubuntu:
  Fix Released
Status in media-hub package in Ubuntu:
  Incomplete
Status in pulseaudio package in Ubuntu:
  Incomplete
Status in qtubuntu-camera package in Ubuntu:
  Fix Released
Status in qtubuntu-media package in Ubuntu:
  Fix Released
Status in telephony-service package in Ubuntu:
  Fix Released
Status in ubuntu-clock-app package in Ubuntu:
  Fix Released
Status in unity8 package in Ubuntu:
  Fix Released

Bug description:
  The Qt 5.5 packages at https://launchpad.net/~ci-train-ppa-
  service/+archive/ubuntu/landing-012 now include the upstream versions
  of QML Playlist and Audio Role patches that went in to Qt 5.6.

  There are some differences in the Audio Role patch compared to the
  version on vivid-overlay PPA that requires changes.

  Qt 5.5 targets landing soon after xenial opens.

  For reference,
  Old API: 
http://anonscm.debian.org/cgit/pkg-kde/qt/qtmultimedia.git/diff/debian/patches/adding_media_role_property.patch?h=ubuntu=d5149eefcd093d96be3191d5f8a7f622f788e1f4
  New, upstreamed API: 
http://anonscm.debian.org/cgit/pkg-kde/qt/qtmultimedia.git/tree/debian/patches/Add-audio-role-API-to-QMediaPlayer.patch?h=ubuntu

  More information about Qt 5.5 at
  https://wiki.ubuntu.com/Touch/QtTesting

  The plan (2015-11-02):

  Patch some components to work with both old API & Qt 5.4 + new API &
  Qt 5.5 - qtubuntu-camera, qtubuntu-media to detect at compile time and
  Unity 8 at runtime.

  Pulseaudio and media-hub would land only to xenial, switching to the
  new API as part of the Qt 5.5 silo.

  Clock and dropping-letters drop the audio role usage as it's not
  supposed to be used in those.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-clock-app/+bug/1493851/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1666701] Re: unity8 freezes for a second while opening a client-side submenu in kate

[Albert Astals Cid]

** Changed in: qtubuntu (Ubuntu)
 Assignee: Albert Astals Cid (aacid) => (unassigned)

** Changed in: unity8 (Ubuntu)
 Assignee: Albert Astals Cid (aacid) => (unassigned)

** Changed in: unity8 (Ubuntu)
   Status: In Progress => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1666701

Title:
  unity8 freezes for a second while opening a client-side submenu in
  kate

Status in qtmir package in Ubuntu:
  Invalid
Status in qtubuntu package in Ubuntu:
  Invalid
Status in unity8 package in Ubuntu:
  Invalid

Bug description:
  Steps:

  - Launch kate
  - Right-click on its main, text editor, area. A pop-up menu should show up.
  - Hover your mouse pointer over the "Bookmarks" menu item. A sub menu with 
"Set Bookmark" and "Clear All Bookmarks" options will show up.

  Expected outcome:
  The sub menu opens immediately and the mouse pointer is responsive throughout

  Actual outcome:
  unity8 freezes for a bit, with mouse pointer becoming unresponsive, before 
finally resuming and showing up the submenu.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtmir/+bug/1666701/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1604025] Re: CroppedImageMinimumSourceSize loads the image twice in the bad scenario

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: Albert Astals Cid (aacid) => (unassigned)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtdeclarative-opensource-
src in Ubuntu.
https://bugs.launchpad.net/bugs/1604025

Title:
  CroppedImageMinimumSourceSize loads the image twice in the bad
  scenario

Status in qtdeclarative-opensource-src package in Ubuntu:
  Triaged
Status in unity8 package in Ubuntu:
  Triaged

Bug description:
  To get the best looking possible Image sometimes we end up loading the
  Image twice, see http://lists.qt-
  project.org/pipermail/development/2016-July/026562.html for an in
  depth explanation.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtdeclarative-opensource-src/+bug/1604025/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672719] Re: Launcher quicklist should close if tabbing to a different item

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: Albert Astals Cid (aacid) => (unassigned)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672719

Title:
  Launcher quicklist should close if tabbing to a different item

Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  How to reproduce:
   * Alt+F1
  - Launcher appears
   * Press down
  - First item of launcher is selected
   * Press right
  - Quicklist of first item of launcher is opened
   * Press tab
  - Second item of launcher is selected BUT quicklist of first item of 
launcher is still open

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1672719/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672323] Re: cutting & pasting in the app drawer search line asserts

[Albert Astals Cid]

I can't seem to reproduce this anymore, paste seems to do "nothing"

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672323

Title:
  cutting & pasting in the app drawer search line asserts

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  Triaged

Bug description:
  I get an assert when I paste into the appdrawer search line something
  i just had cut from it.

  That is:
   * Open app drawer
   * Write something
   * Right click
   * Select All
   * Cut
   * Right click
   * Paste

  I got http://paste.ubuntu.com/24169865/

  Thread 17 is aborting, i tried to install libstdc++6-dbgsym in my
  system but it would not let me :/

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1672323/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1680018] [NEW] Need autotest for http://bazaar.launchpad.net/~lukas-kde/unity8/fix-window-title-vs-menu/revision/2878

[Albert Astals Cid]

Public bug reported:

As discussed in https://code.launchpad.net/~lukas-kde/unity8/fix-window-
title-vs-menu/+merge/319975/comments/844062 we need an autotest for that
change.

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Assignee: Lukáš Tinkl (lukas-kde)
 Status: New

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Lukáš Tinkl (lukas-kde)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1680018

Title:
  Need autotest for http://bazaar.launchpad.net/~lukas-kde/unity8/fix-
  window-title-vs-menu/revision/2878

Status in unity8 package in Ubuntu:
  New

Bug description:
  As discussed in https://code.launchpad.net/~lukas-kde/unity8/fix-
  window-title-vs-menu/+merge/319975/comments/844062 we need an autotest
  for that change.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1680018/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672719] Re: Launcher quicklist should close if tabbing to a different item

[Albert Astals Cid]

** Branch linked: lp:~aacid/unity8/closeQuicklistOnFocusMove

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672719

Title:
  Launcher quicklist should close if tabbing to a different item

Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  How to reproduce:
   * Alt+F1
  - Launcher appears
   * Press down
  - First item of launcher is selected
   * Press right
  - Quicklist of first item of launcher is opened
   * Press tab
  - Second item of launcher is selected BUT quicklist of first item of 
launcher is still open

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1672719/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672719] Re: Launcher quicklist should close if tabbing to a different item

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
   Status: New => In Progress

** Changed in: unity8 (Ubuntu)
   Importance: Undecided => Medium

** Changed in: unity8 (Ubuntu)
 Assignee: Michael Zanetti (mzanetti) => Albert Astals Cid (aacid)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672719

Title:
  Launcher quicklist should close if tabbing to a different item

Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  How to reproduce:
   * Alt+F1
  - Launcher appears
   * Press down
  - First item of launcher is selected
   * Press right
  - Quicklist of first item of launcher is opened
   * Press tab
  - Second item of launcher is selected BUT quicklist of first item of 
launcher is still open

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1672719/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1667570] Re: App drawer icon titles are difficult to read (truncated too much and have no tooltips)

[Albert Astals Cid]

** Branch linked: lp:~aacid/unity8/spacier_drawer

** Changed in: unity8 (Ubuntu)
 Assignee: Michael Zanetti (mzanetti) => Albert Astals Cid (aacid)

** Changed in: unity8 (Ubuntu)
   Status: Triaged => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1667570

Title:
  App drawer icon titles are difficult to read (truncated too much and
  have no tooltips)

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  App drawer icon titles are difficult to read (truncated too much
  ending in "..." and have no tooltips)

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1667570/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1605327] Re: Opening terminal-app does not focus on password prompt

[Albert Astals Cid]

It's on the zesty-overlay

$ LC_ALL=C apt-cache policy ubuntu-terminal-app
ubuntu-terminal-app:
  Installed: 0.7.218+17.04.20170328.3-0ubuntu1
  Candidate: 0.7.218+17.04.20170328.3-0ubuntu1
  Version table:
 *** 0.7.218+17.04.20170328.3-0ubuntu1 500
500 
http://ppa.launchpad.net/ci-train-ppa-service/stable-phone-overlay/ubuntu 
zesty/main amd64 Packages
100 /var/lib/dpkg/status
 0.7.218ubuntu2 500
500 http://ftp.halifax.rwth-aachen.de/ubuntu zesty/main amd64 Packages

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1605327

Title:
  Opening terminal-app does not focus on password prompt

Status in Canonical System Image:
  New
Status in Ubuntu Terminal App:
  Fix Released
Status in ubuntu-terminal-app package in Ubuntu:
  Triaged
Status in unity8 package in Ubuntu:
  Invalid
Status in unity8-desktop-session package in Ubuntu:
  Invalid

Bug description:
  When I open the terminal app, I get asked for my password. If I just
  start typing, the password gets written in the terminal bash and not
  in the correct popup prompt.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1605327/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1676016] Re: Overflow menus don't work

[Albert Astals Cid]

** Branch linked: lp:~aacid/unity8/fix_overflow_menu_regression

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1676016

Title:
  Overflow menus don't work

Status in Canonical System Image:
  In Progress
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Ubuntu 17.04 unity8

  the menu doesn't work if the window is smaller
  launch kate (without Xmir), resize the window until the menu is wider than 
the window (you'll see a down arrow that will expand the menu if pressed) see 
screenshot
  now try to open the expanded menu/submenus see screenshot

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1676016/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1676016] Re: Overflow menus don't work

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

** Changed in: unity8 (Ubuntu)
   Status: Triaged => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1676016

Title:
  Overflow menus don't work

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Ubuntu 17.04 unity8

  the menu doesn't work if the window is smaller
  launch kate (without Xmir), resize the window until the menu is wider than 
the window (you'll see a down arrow that will expand the menu if pressed) see 
screenshot
  now try to open the expanded menu/submenus see screenshot

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1676016/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1675802] Re: Empty spaces in some (titlebar integrated) menus

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
   Status: New => Invalid

** Changed in: qtubuntu (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

** Changed in: qtubuntu (Ubuntu)
   Status: New => In Progress

** Changed in: unity8 (Ubuntu)
 Assignee: Albert Astals Cid (aacid) => (unassigned)

** Branch linked: lp:~aacid/qtubuntu/honor_item_visibility

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1675802

Title:
  Empty spaces in some (titlebar integrated) menus

Status in Canonical System Image:
  New
Status in qtubuntu package in Ubuntu:
  In Progress
Status in unity8 package in Ubuntu:
  Invalid

Bug description:
  Ubuntu 17.04 Unity 8

  empty spaces in some menus, see the attached screenshots (unity8/unity7). 
there is tiled a qt5 app running without Xmir but i've seen the same in other 
qt5 apps (to install tiled, apt install tiled)
  affected is File \ Recent Files (menu), you'll see a big empty space

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1675802/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1675802] Re: empty spaces in some menus

[Albert Astals Cid]

I'll have a look

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1675802

Title:
  empty spaces in some menus

Status in Canonical System Image:
  New
Status in qtubuntu package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  Ubuntu 17.04 Unity 8

  empty spaces in some menus, see the attached screenshots (unity8/unity7). 
there is tiled a qt5 app running without Xmir but i've seen the same in other 
qt5 apps (to install tiled, apt install tiled)
  affected is File \ Recent Files (menu), you'll see a big empty space

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1675802/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1675364] Re: [Regression] xmir applications fail to render

[Albert Astals Cid]

Yes, it persists across reboots (i'd say it started happening around 2
or 3 days ago)

Zesty, for me.

I just used konsole as an example, it seems to me it's all xmir apps,
another one i tried and fails is gnome-sudoku.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1675364

Title:
  [Regression] xmir applications fail to render

Status in Canonical System Image:
  Triaged
Status in libertine package in Ubuntu:
  New
Status in mir package in Ubuntu:
  New
Status in qtmir package in Ubuntu:
  Incomplete
Status in ubuntu-app-launch package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  Incomplete
Status in xorg-server package in Ubuntu:
  New

Bug description:
  Recently something has regressed and if i start konsole (using xmir)
  in unity8 all i get is the splash screen with a spinner forever.

  Looking at the ps output it seems that the konsole process has
  actually started.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1675364/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1675364] Re: [Regression] xmir applications fail to render

[Albert Astals Cid]

** Also affects: libertine (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1675364

Title:
  [Regression] xmir applications fail to render

Status in Canonical System Image:
  Triaged
Status in libertine package in Ubuntu:
  New
Status in mir package in Ubuntu:
  New
Status in qtmir package in Ubuntu:
  Incomplete
Status in ubuntu-app-launch package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  Incomplete
Status in xorg-server package in Ubuntu:
  New

Bug description:
  Recently something has regressed and if i start konsole (using xmir)
  in unity8 all i get is the splash screen with a spinner forever.

  Looking at the ps output it seems that the konsole process has
  actually started.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1675364/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1675364] [NEW] [Regression] xmir applications fail to render

[Albert Astals Cid]

Public bug reported:

Recently something has regressed and if i start konsole (using xmir) in
unity8 all i get is the splash screen with a spinner forever.

Looking at the ps output it seems that the konsole process has actually
started.

** Affects: canonical-devices-system-image
 Importance: Critical
 Assignee: Stephen M. Webb (bregma)
 Status: Triaged

** Affects: libertine (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: mir (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: qtmir (Ubuntu)
 Importance: Undecided
 Status: Incomplete

** Affects: ubuntu-app-launch (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: Incomplete

** Affects: xorg-server (Ubuntu)
 Importance: Undecided
 Status: New

** Also affects: mir (Ubuntu)
   Importance: Undecided
   Status: New

** Also affects: qtmir (Ubuntu)
   Importance: Undecided
   Status: New

** Also affects: xorg (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1675364

Title:
  [Regression] xmir applications fail to render

Status in Canonical System Image:
  Triaged
Status in libertine package in Ubuntu:
  New
Status in mir package in Ubuntu:
  New
Status in qtmir package in Ubuntu:
  Incomplete
Status in ubuntu-app-launch package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  Incomplete
Status in xorg-server package in Ubuntu:
  New

Bug description:
  Recently something has regressed and if i start konsole (using xmir)
  in unity8 all i get is the splash screen with a spinner forever.

  Looking at the ps output it seems that the konsole process has
  actually started.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1675364/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1646648] Re: Unity8 crashes with SIGSEGV in qtmir::MirSurface::onCloseTimedOut () at ./src/modules/Unity/Application/mirsurface.cpp:917

[Albert Astals Cid]

Is this "fixed" ?

If you look at
https://errors.ubuntu.com/problem/ded3a210b92755ec7de56b1bb4097103984eb123
all the "new" reports are either from 15.04+armhf (i.e phone) running an
"old" version (20161114) or amd64 also running an "old" version
(20160922).

The first one i can find that is "new-ish" is
December 27, 2016 using 8.15+17.04.20161207.1-0ubuntu1

So maybe we have fixed it since and that's why no other 17.04 version
crash has happened?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1646648

Title:
  Unity8 crashes with SIGSEGV in qtmir::MirSurface::onCloseTimedOut ()
  at ./src/modules/Unity/Application/mirsurface.cpp:917

Status in Canonical System Image:
  New
Status in qtmir package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  The Ubuntu Error Tracker has been receiving reports about a problem regarding 
unity8.  This problem was most recently seen with package version 
8.15+17.04.20161116.1-0ubuntu1, the problem page at 
https://errors.ubuntu.com/problem/ded3a210b92755ec7de56b1bb4097103984eb123 
contains more details, including versions of packages affected, stacktrace or 
traceback, and individual crash reports.
  If you do not have access to the Ubuntu Error Tracker you can request it at 
http://forms.canonical.com/reports/.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1646648/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1671458] Re: Unity8 window restore animation goes to an old location, then jumps to the correct one

[Albert Astals Cid]

** Branch linked: lp:~aacid/unity8/fixUnminimizePosition

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1671458

Title:
  Unity8 window restore animation goes to an old location, then jumps to
  the correct one

Status in Canonical System Image:
  In Progress
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  ubuntu 17.04 unity8
  [unity8] minimizing/restoring strange behaviour 

  on restoring the animation is jumpy it goes trough 2 paths, first
  minimized position and then to the actual position.

  open some random app, minimize, click on the icon (launcher) to
  restore. works fine. now move the window a bit, minimize, restore, now
  the animation is broken. first it goes to the first min pos and then
  jumps to the actual pos. repeat

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1671458/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1671458] Re: Unity8 window restore animation goes to an old location, then jumps to the correct one

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

** Changed in: unity8 (Ubuntu)
   Status: Triaged => Confirmed

** Changed in: unity8 (Ubuntu)
   Status: Confirmed => In Progress

** Changed in: canonical-devices-system-image
   Status: Triaged => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1671458

Title:
  Unity8 window restore animation goes to an old location, then jumps to
  the correct one

Status in Canonical System Image:
  In Progress
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  ubuntu 17.04 unity8
  [unity8] minimizing/restoring strange behaviour 

  on restoring the animation is jumpy it goes trough 2 paths, first
  minimized position and then to the actual position.

  open some random app, minimize, click on the icon (launcher) to
  restore. works fine. now move the window a bit, minimize, restore, now
  the animation is broken. first it goes to the first min pos and then
  jumps to the actual pos. repeat

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1671458/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1670657] Re: No log out option in session indicator in unity8 in Qemu VM

[Albert Astals Cid]

** Changed in: canonical-devices-system-image
   Status: Triaged => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qmenumodel in Ubuntu.
https://bugs.launchpad.net/bugs/1670657

Title:
  No log out option in session indicator in unity8 in Qemu VM

Status in Canonical System Image:
  In Progress
Status in indicator-session package in Ubuntu:
  In Progress
Status in qmenumodel package in Ubuntu:
  Invalid
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  With a basic VM created with default options in virt-manager on daily
  zesty image.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1670657/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1671746] Re: [unity8] launcher menu gets broken in some cases when you have a lot of apps and you scroll up

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: Albert Astals Cid (aacid) => Michael Zanetti (mzanetti)

** Changed in: unity8 (Ubuntu)
   Status: Triaged => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1671746

Title:
  [unity8] launcher menu gets broken in some cases when you have a lot
  of apps and you scroll up

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  ubuntu 17.04 unity8
  [unity8] launcher menu gets broken in some cases when you have a lot of apps 
and you scroll up

  have a lot of apps pinned on the launcher
  right click on the first app (the one under the ubuntu logo) to open the menu
  now scroll down the launcher with the mouse to make the menu go up, you'll 
see that it brakes, the arrow gets disconnected.

  see attached screenshot

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1671746/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1671746] Re: [unity8] launcher menu gets broken in some cases when you have a lot of apps and you scroll up

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1671746

Title:
  [unity8] launcher menu gets broken in some cases when you have a lot
  of apps and you scroll up

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  ubuntu 17.04 unity8
  [unity8] launcher menu gets broken in some cases when you have a lot of apps 
and you scroll up

  have a lot of apps pinned on the launcher
  right click on the first app (the one under the ubuntu logo) to open the menu
  now scroll down the launcher with the mouse to make the menu go up, you'll 
see that it brakes, the arrow gets disconnected.

  see attached screenshot

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1671746/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1673404] Re: maximized button stays in the hover state until you move the mouse if you right click on maximize

[Albert Astals Cid]

And by better Qt I mean one that contains the bugfix 
forhttps://bugreports.qt.io/browse/QTBUG-42578
i.e.

$ git tag --contains 6f84a09dfbd15aac023580cf06e7b8c24f3b524c
v5.8.0
v5.8.0-alpha1
v5.8.0-beta1
v5.8.0-rc1
v5.9.0-alpha1

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1673404

Title:
  maximized button stays in the hover state until you move the mouse if
  you right  click on maximize

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  Triaged

Bug description:
  ubuntu 17.04 unity 8

  maximized button stays in the hover state until you move the mouse if
  you right  click on maximize

  open random app, right click on maximize button in title bar. the
  button looks like the mouse pointer is over (hover) but the mouse
  pointer is not there, remains like this until you move the mouse.

  see attached screenshot

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1673404/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1673404] Re: maximized button stays in the hover state until you move the mouse if you right click on maximize

[Albert Astals Cid]

Update to a better Qt ^_^

/me hides

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1673404

Title:
  maximized button stays in the hover state until you move the mouse if
  you right  click on maximize

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  Triaged

Bug description:
  ubuntu 17.04 unity 8

  maximized button stays in the hover state until you move the mouse if
  you right  click on maximize

  open random app, right click on maximize button in title bar. the
  button looks like the mouse pointer is over (hover) but the mouse
  pointer is not there, remains like this until you move the mouse.

  see attached screenshot

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1673404/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1673721] [NEW] Alt+Tab animation to spread strange in staged mode

[Albert Astals Cid]

Public bug reported:

When in staged mode, opening the spread via Alt+Tab animation is a bit
strange

The windows seem to slowly come from top left edge being "small" is and
then get bigger suddenly when they reach the center of the screen.

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1673721

Title:
  Alt+Tab animation to spread strange in staged mode

Status in unity8 package in Ubuntu:
  New

Bug description:
  When in staged mode, opening the spread via Alt+Tab animation is a bit
  strange

  The windows seem to slowly come from top left edge being "small" is
  and then get bigger suddenly when they reach the center of the screen.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1673721/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1673725] [NEW] Alt+Left Click should not change cursor to the "dragging" cursor in staged mode

[Albert Astals Cid]

Public bug reported:

You can't drag windows in staged mode, so having Alt+LeftClick change
the cursor to the dragging cursor is strange and seems to imply you can
actually drag them.

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1673725

Title:
  Alt+Left Click should not change cursor to the "dragging" cursor in
  staged mode

Status in unity8 package in Ubuntu:
  New

Bug description:
  You can't drag windows in staged mode, so having Alt+LeftClick change
  the cursor to the dragging cursor is strange and seems to imply you
  can actually drag them.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1673725/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1673415] [NEW] QDockWidgets don't work at all

[Albert Astals Cid]

Public bug reported:

How to reproduce:
 * Install tiled
 * Start tiled
 * Press the small square button next to properties
 * That should undock the properties widget, make it a window and you should be 
able to drag it freely around the desktop, that doesn't happen
 * Alternatively, drag the properties widget from the "properties" text, you'll 
be able to drag it, but only inside the window, instead of around the desktop, 
and once you release it, you can't drag it anymore

To "reset" the docked status, remove ~/.config/mapeditor.org/tiled.conf

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1673415

Title:
  QDockWidgets don't work at all

Status in unity8 package in Ubuntu:
  New

Bug description:
  How to reproduce:
   * Install tiled
   * Start tiled
   * Press the small square button next to properties
   * That should undock the properties widget, make it a window and you should 
be able to drag it freely around the desktop, that doesn't happen
   * Alternatively, drag the properties widget from the "properties" text, 
you'll be able to drag it, but only inside the window, instead of around the 
desktop, and once you release it, you can't drag it anymore

  To "reset" the docked status, remove
  ~/.config/mapeditor.org/tiled.conf

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1673415/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1654974] Re: webbrowser-app locks up my session (zesty)

[Albert Astals Cid]

Fixed with 0.23+17.04.20170310-0ubuntu1

** Changed in: webbrowser-app (Ubuntu)
   Status: Confirmed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1654974

Title:
  webbrowser-app locks up my session (zesty)

Status in webbrowser-app package in Ubuntu:
  Fix Released

Bug description:
  My setup:
   * up-to-date zesty
   * unity8-greeter as greeter
   * unity7 as desktop

  How to reproduce:
   * open xterm
   * start webbrowser-app from xterm

  Everything locks up and have to hard reboot the computer.

  I tried catching the output to a file with &> but got nothing, so i
  took a picture.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1654974/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672722] Re: Unclickable gap between adjacent titlebar menus in Unity8

[Albert Astals Cid]

** Branch linked: lp:~aacid/unity8/closeMenuBarItemGaps

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1672722

Title:
  Unclickable gap between adjacent titlebar menus in Unity8

Status in Canonical System Image:
  Triaged
Status in qtubuntu package in Ubuntu:
  Invalid
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Ubuntu 17.04 unity8

  i'm starting to hit more and more the gab in the menu (space between
  the menu strings). clicking there won't open the submenu.

  launch kate native, hover the menu, click on the space between the
  menu strings. should not be such a thing. the space between the
  hitboxes should be 0 so you don't end up in situations like this

  see screenshot

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1672722/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672931] Re: [regression] Qt & GTK apps on Unity8 are defaulting to Xmir instead of native GTK/Qt (and so menus don't appear in the titlebar)

[Albert Astals Cid]

It's not a regression, it's a conscious decision :(

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672931

Title:
  [regression] Qt & GTK apps on Unity8 are defaulting to Xmir instead of
  native GTK/Qt (and so menus don't appear in the titlebar)

Status in Canonical System Image:
  Confirmed
Status in ubuntu-app-launch package in Ubuntu:
  Confirmed
Status in unity8 package in Ubuntu:
  Confirmed

Bug description:
  Qt & GTK apps on Unity8 are defaulting to Xmir instead of native
  GTK/Qt on Mir.

  I noticed a slight change in appearance and performance, but also:

  dan  25410  0.1  0.2 423316 38996 ?Sl   11:14   0:00 Xmir 
-rootless -displayfd 3 -mir org.gnome.Calculator
  dan  25456  1.8  0.5 606084 91736 ?Sl   11:14   0:03 Xmir 
-rootless -displayfd 3 -mir org.gnome.Nautilus
  dan  25611  1.7  0.2 345312 35520 ?Sl   11:18   0:00 Xmir 
-rootless -displayfd 3 -mir webbrowser-app_webbrowser-app_10

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1672931/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672722] Re: there is a gap in the menu and clicking on the gap doesn't open the submenu

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

** Changed in: qtubuntu (Ubuntu)
   Status: New => Invalid

** Changed in: unity8 (Ubuntu)
   Status: New => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672722

Title:
  there is a gap in the menu and clicking on the gap doesn't open the
  submenu

Status in Canonical System Image:
  New
Status in qtubuntu package in Ubuntu:
  Invalid
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Ubuntu 17.04 unity8

  i'm starting to hit more and more the gab in the menu (space between
  the menu strings). clicking there won't open the submenu.

  launch kate native, hover the menu, click on the space between the
  menu strings. should not be such a thing. the space between the
  hitboxes should be 0 so you don't end up in situations like this

  see screenshot

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1672722/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672673] Re: Application menus should hide when triggering the spread

[Albert Astals Cid]

** Branch linked: lp:~aacid/unity8/alt_tab_close_top_menu

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672673

Title:
  Application menus should hide when triggering the spread

Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Having the menu open makes using the spread hard.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1672673/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672719] [NEW] Launcher quicklist should close if tabbing to a different item

[Albert Astals Cid]

Public bug reported:

How to reproduce:
 * Alt+F1
- Launcher appears
 * Press down
- First item of launcher is selected
 * Press right
- Quicklist of first item of launcher is opened
 * Press tab
- Second item of launcher is selected BUT quicklist of first item of 
launcher is still open

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672719

Title:
  Launcher quicklist should close if tabbing to a different item

Status in unity8 package in Ubuntu:
  New

Bug description:
  How to reproduce:
   * Alt+F1
  - Launcher appears
   * Press down
  - First item of launcher is selected
   * Press right
  - Quicklist of first item of launcher is opened
   * Press tab
  - Second item of launcher is selected BUT quicklist of first item of 
launcher is still open

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1672719/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1670338] Re: [unity8] you can break app menus if you open the apps switcher while the menu is open

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
   Status: Triaged => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1670338

Title:
  [unity8] you can break app menus if you open the apps switcher while
  the menu is open

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  ubuntu 17.04 Unity8

  launch Kate and another app, (maximize both apps), click on the main
  menu, open some submenus then with the mouse open the app switcher,
  you'll now see the menu above the app switcher see screenshot1. now
  click on the other app another app (i have qupzilla) and then open the
  menu, now you'll see parts of kate's menu above the other app, see
  sreenshot2

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1670338/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672673] [NEW] Application menus should hide when triggering the spread

[Albert Astals Cid]

Public bug reported:

Having the menu open makes using the spread hard.

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Assignee: Albert Astals Cid (aacid)
 Status: In Progress

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

** Changed in: unity8 (Ubuntu)
   Status: New => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672673

Title:
  Application menus should hide when triggering the spread

Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Having the menu open makes using the spread hard.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1672673/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1670338] Re: [unity8] you can break app menus if you open the apps switcher while the menu is open

[Albert Astals Cid]

** Branch linked: lp:~aacid/unity8/stray_menus

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1670338

Title:
  [unity8] you can break app menus if you open the apps switcher while
  the menu is open

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  Triaged

Bug description:
  ubuntu 17.04 Unity8

  launch Kate and another app, (maximize both apps), click on the main
  menu, open some submenus then with the mouse open the app switcher,
  you'll now see the menu above the app switcher see screenshot1. now
  click on the other app another app (i have qupzilla) and then open the
  menu, now you'll see parts of kate's menu above the other app, see
  sreenshot2

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1670338/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1666701] Re: unity8 freezes for a second while opening a client-side submenu in kate

[Albert Astals Cid]

** Branch unlinked: lp:~aacid/unity8/dontCreateUnusedMenus

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1666701

Title:
  unity8 freezes for a second while opening a client-side submenu in
  kate

Status in qtmir package in Ubuntu:
  Invalid
Status in qtubuntu package in Ubuntu:
  Invalid
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Steps:

  - Launch kate
  - Right-click on its main, text editor, area. A pop-up menu should show up.
  - Hover your mouse pointer over the "Bookmarks" menu item. A sub menu with 
"Set Bookmark" and "Clear All Bookmarks" options will show up.

  Expected outcome:
  The sub menu opens immediately and the mouse pointer is responsive throughout

  Actual outcome:
  unity8 freezes for a bit, with mouse pointer becoming unresponsive, before 
finally resuming and showing up the submenu.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtmir/+bug/1666701/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1670338] Re: [unity8] you can break app menus if you open the apps switcher while the menu is open

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1670338

Title:
  [unity8] you can break app menus if you open the apps switcher while
  the menu is open

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  Triaged

Bug description:
  ubuntu 17.04 Unity8

  launch Kate and another app, (maximize both apps), click on the main
  menu, open some submenus then with the mouse open the app switcher,
  you'll now see the menu above the app switcher see screenshot1. now
  click on the other app another app (i have qupzilla) and then open the
  menu, now you'll see parts of kate's menu above the other app, see
  sreenshot2

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1670338/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672323] Re: cutting & pasting in the app drawer search line asserts

[Albert Astals Cid]

Fuller backtrace http://paste.ubuntu.com/24171199/

For some reason something wants to create a desktop file for "content-
hub-clipboard" and that seems to make UAL unhappy.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672323

Title:
  cutting & pasting in the app drawer search line asserts

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  Triaged

Bug description:
  I get an assert when I paste into the appdrawer search line something
  i just had cut from it.

  That is:
   * Open app drawer
   * Write something
   * Right click
   * Select All
   * Cut
   * Right click
   * Paste

  I got http://paste.ubuntu.com/24169865/

  Thread 17 is aborting, i tried to install libstdc++6-dbgsym in my
  system but it would not let me :/

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1672323/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672323] Re: cutting & pasting in the app drawer search line asserts

[Albert Astals Cid]

terminate called after throwing an instance of 'std::runtime_error'
  what():  Application is not shown in 'Unity:Unity8'

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672323

Title:
  cutting & pasting in the app drawer search line asserts

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  Triaged

Bug description:
  I get an assert when I paste into the appdrawer search line something
  i just had cut from it.

  That is:
   * Open app drawer
   * Write something
   * Right click
   * Select All
   * Cut
   * Right click
   * Paste

  I got http://paste.ubuntu.com/24169865/

  Thread 17 is aborting, i tried to install libstdc++6-dbgsym in my
  system but it would not let me :/

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1672323/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1672323] [NEW] cutting & pasting in the app drawer search line asserts

[Albert Astals Cid]

Public bug reported:

I get an assert when I paste into the appdrawer search line something i
just had cut from it.

That is:
 * Open app drawer
 * Write something
 * Right click
 * Select All
 * Cut
 * Right click
 * Paste

I got http://paste.ubuntu.com/24169865/

Thread 17 is aborting, i tried to install libstdc++6-dbgsym in my system
but it would not let me :/

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1672323

Title:
  cutting & pasting in the app drawer search line asserts

Status in unity8 package in Ubuntu:
  New

Bug description:
  I get an assert when I paste into the appdrawer search line something
  i just had cut from it.

  That is:
   * Open app drawer
   * Write something
   * Right click
   * Select All
   * Cut
   * Right click
   * Paste

  I got http://paste.ubuntu.com/24169865/

  Thread 17 is aborting, i tried to install libstdc++6-dbgsym in my
  system but it would not let me :/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1672323/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1671449] Re: Unity8 window shadows have gone missing

[Albert Astals Cid]

** Branch linked: lp:~aacid/ubuntu-ui-toolkit/fix-borderimage-regression

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1671449

Title:
  Unity8 window shadows have gone missing

Status in Canonical System Image:
  Triaged
Status in ubuntu-ui-toolkit package in Ubuntu:
  Triaged
Status in unity8 package in Ubuntu:
  Confirmed

Bug description:
  [unity8] windows don't have shadow

  i see this on both 16.04 and 17.04 unity8 after the last update
  i think? i've also seen this before by installing silo 2540 

  see attached screenshot

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1671449/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1671424] [NEW] Applications can not interrupt closing them

[Albert Astals Cid]

Public bug reported:

Using unity7:
 * Open kate
 * write something very important in the text area
 * Press Alt+F4 because you're not very smart
 * Get dialog saying you have unsaved changes
 * You can:
   * save (which ends in a quit after saving)
   * cancel the close

Using unity8
 * Open kate
 * write something very important in the text area
 * Press Alt+F4 because you're not very smart
 * You lost your very important text

** Affects: canonical-devices-system-image
 Importance: Undecided
 Status: New

** Affects: qtmir (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

** Description changed:

  Using unity7:
-  * Open kate
-  * write something very important in the text area
-  * Press Alt+F4 because you're not very smart
-  * Get dialog saying you have unsaved changes
-  * You can save (which ends in a quit after saving)
-  * You can cancel the close
+  * Open kate
+  * write something very important in the text area
+  * Press Alt+F4 because you're not very smart
+  * Get dialog saying you have unsaved changes
+  * You can:
+* save (which ends in a quit after saving)
+* cancel the close
  
  Using unity8
-  * Open kate
-  * write something very important in the text area
-  * Press Alt+F4 because you're not very smart
-  * You lost your very important text
+  * Open kate
+  * write something very important in the text area
+  * Press Alt+F4 because you're not very smart
+  * You lost your very important text

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1671424

Title:
  Applications can not interrupt closing them

Status in Canonical System Image:
  New
Status in qtmir package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  Using unity7:
   * Open kate
   * write something very important in the text area
   * Press Alt+F4 because you're not very smart
   * Get dialog saying you have unsaved changes
   * You can:
 * save (which ends in a quit after saving)
 * cancel the close

  Using unity8
   * Open kate
   * write something very important in the text area
   * Press Alt+F4 because you're not very smart
   * You lost your very important text

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1671424/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1670724] Re: Cannot launch hp tools

[Albert Astals Cid]

It "starts" from the app drawer here, but you get an empty translucent
window

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1670724

Title:
  Cannot launch hp tools

Status in Canonical System Image:
  Incomplete
Status in unity8 package in Ubuntu:
  Incomplete

Bug description:
  hplip is a common set of tools to manage HP printers. The tools fail
  to start on unity8 and the indicator is not displayed in the top
  panel.

  The following message is displayed on the command line:
  -
  HP Linux Imaging and Printing System (ver. 3.16.11)
  Printer/Fax Setup Utility ver. 9.0

  Copyright (c) 2001-15 HP Development Company, LP
  This software comes with ABSOLUTELY NO WARRANTY.
  This is free software, and you are welcome to distribute it
  under certain conditions. See COPYING file for more details.

  Loading module: 'libubuntu_application_api_desktop_mirclient.so.3.0.0'
  [QPA] QMirClientClientIntegration: connection to Mir server failed.

  Mir returned: "Failed to connect: not accepted by server"
  [2017-03-07 16:06:27.426662]  MirConnectionAPI: Caught exception at 
client library boundary (in mir_connection_release): 
/build/mir-rgB9wX/mir-0.26.1+17.04.20170209.1/src/client/rpc/stream_socket_transport.cpp(168):
 Throw in function virtual void 
mir::client::rpc::StreamSocketTransport::send_message(const 
std::vector&, const std::vector&)
  Dynamic exception type: 
boost::exception_detail::clone_impl
  std::exception::what: Failed to send message to server: Relais brisé (pipe)
  [boost::errinfo_errno_*] = 32, "Relais brisé (pipe)"
  -

  ProblemType: Bug
  DistroRelease: Ubuntu 17.04
  Package: unity8 8.15+17.04.20170221-0ubuntu1
  ProcVersionSignature: Ubuntu 4.10.0-9.11-generic 4.10.0
  Uname: Linux 4.10.0-9-generic x86_64
  ApportVersion: 2.20.4-0ubuntu2
  Architecture: amd64
  Date: Tue Mar  7 16:08:35 2017
  InstallationDate: Installed on 2014-07-23 (958 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  SourcePackage: unity8
  UpgradeStatus: Upgraded to zesty on 2016-11-15 (112 days ago)
  upstart.unity8-dash.log: [2017-03-07:15:15:07.070] "clickscope" : setActive: 
false

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1670724/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1664578] Re: Menus that fill themselves on QMenu::aboutToShow don't work

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
   Status: Confirmed => In Progress

** Changed in: qtubuntu (Ubuntu)
   Status: Confirmed => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1664578

Title:
  Menus that fill themselves on QMenu::aboutToShow don't work

Status in qtubuntu package in Ubuntu:
  In Progress
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Our menu implementation doesn't trigger QMenu::aboutToShow so some
  menus in konsole and kate show up empty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1664578/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1667620] Re: Opening the launcher should hide the "touch" menus

[Albert Astals Cid]

** Branch linked: lp:~aacid/unity8/launcher_touch_menu_interaction

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1667620

Title:
  Opening the launcher should hide the "touch" menus

Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  When opening the launcher the "touch menus" (those that look like the
  indicators but on the left side of the screen) should hide

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1667620/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1671069] Re: touch menus should show more to the right when launcher is visible

[Albert Astals Cid]

** Branch linked: lp:~aacid/unity8/launcher_touch_menu_interaction

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1671069

Title:
  touch menus should show more to the right when launcher is visible

Status in Canonical System Image:
  In Progress
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  To not have this problem http://i.imgur.com/pYXv05G.jpg

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1671069/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1667620] Re: Opening the launcher should hide the "touch" menus

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

** Changed in: unity8 (Ubuntu)
   Status: New => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1667620

Title:
  Opening the launcher should hide the "touch" menus

Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  When opening the launcher the "touch menus" (those that look like the
  indicators but on the left side of the screen) should hide

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1667620/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1671069] Re: touch menus should show more to the right when launcher is visible

[Albert Astals Cid]

** Summary changed:

- touch menus should show more to the right when launcher is always visible
+ touch menus should show more to the right when launcher is visible

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

** Changed in: unity8 (Ubuntu)
   Status: New => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1671069

Title:
  touch menus should show more to the right when launcher is visible

Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  To not have this problem http://i.imgur.com/pYXv05G.jpg

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1671069/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1671069] [NEW] touch menus should show more to the right when launcher is always visible

[Albert Astals Cid]

Public bug reported:

To not have this problem http://i.imgur.com/pYXv05G.jpg

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1671069

Title:
  touch menus should show more to the right when launcher is always
  visible

Status in unity8 package in Ubuntu:
  New

Bug description:
  To not have this problem http://i.imgur.com/pYXv05G.jpg

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1671069/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1671042] [NEW] Support application indicators for Unity8

[Albert Astals Cid]

Public bug reported:

It seems there's no plan to support application indicators for Unity8

I have an application called rsibreak https://userbase.kde.org/RSIBreak

It tells you to stop typing/using the mouse for 20 seconds after every
10 minutes of use.

Basically the application has no window, just a statistics dialog and a
configure dialog.

The "view" of the application is the application indicator that contains
a graphic display that shows how much time is left for the next break.

If we don't support application indicators the user will not see
anything after he launches the application.

** Affects: ubuntu-ux
 Importance: Undecided
 Status: New

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: Incomplete

** Also affects: unity8 (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: unity8 (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1671042

Title:
  Support application indicators for Unity8

Status in Ubuntu UX:
  New
Status in unity8 package in Ubuntu:
  Incomplete

Bug description:
  It seems there's no plan to support application indicators for Unity8

  I have an application called rsibreak
  https://userbase.kde.org/RSIBreak

  It tells you to stop typing/using the mouse for 20 seconds after every
  10 minutes of use.

  Basically the application has no window, just a statistics dialog and
  a configure dialog.

  The "view" of the application is the application indicator that
  contains a graphic display that shows how much time is left for the
  next break.

  If we don't support application indicators the user will not see
  anything after he launches the application.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1671042/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1670694] Re: qtubuntu/qmenumodel don't set disabled value to menu items that open submenus but are disabled

[Albert Astals Cid]

** Changed in: qtubuntu (Ubuntu)
   Status: New => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1670694

Title:
  qtubuntu/qmenumodel don't set disabled value to menu items that open
  submenus but are disabled

Status in qtubuntu package in Ubuntu:
  In Progress

Bug description:
  For example kate -> sessions -> Open quick sessions (if you don't have
  any session) should be disabled.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1670694/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1670694] [NEW] qtubuntu/qmenumodel don't set disabled value to menu items that open submenus but are disabled

[Albert Astals Cid]

Public bug reported:

For example kate -> sessions -> Open quick sessions (if you don't have
any session) should be disabled.

** Affects: qtubuntu (Ubuntu)
 Importance: Undecided
 Assignee: Albert Astals Cid (aacid)
 Status: New

** Changed in: qtubuntu (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1670694

Title:
  qtubuntu/qmenumodel don't set disabled value to menu items that open
  submenus but are disabled

Status in qtubuntu package in Ubuntu:
  New

Bug description:
  For example kate -> sessions -> Open quick sessions (if you don't have
  any session) should be disabled.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1670694/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1664578] Re: Menus that fill themselves on QMenu::aboutToShow don't work

[Albert Astals Cid]

** Branch linked: lp:~aacid/qmenumodel/aboutToShow

** Branch linked: lp:~aacid/qtubuntu/aboutToShow

** Branch linked: lp:~aacid/unity8/aboutToShow

** Description changed:

  Our menu implementation doesn't trigger QMenu::aboutToShow so some menus
  in konsole and kate show up empty.
- 
- QMenu::aboutToHide isn't sent either

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1664578

Title:
  Menus that fill themselves on QMenu::aboutToShow don't work

Status in qtubuntu package in Ubuntu:
  Confirmed
Status in unity8 package in Ubuntu:
  Confirmed

Bug description:
  Our menu implementation doesn't trigger QMenu::aboutToShow so some
  menus in konsole and kate show up empty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1664578/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1670639] [NEW] QMenu::aboutToHide isn't sent to applications

[Albert Astals Cid]

Public bug reported:

Similar to QMenu::aboutToShow in
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1664578

It's a bit less important since less apps use it, but still seems to be
enough used we should send it-

** Affects: qtubuntu (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

** Also affects: qtubuntu (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1670639

Title:
  QMenu::aboutToHide isn't sent to applications

Status in qtubuntu package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  Similar to QMenu::aboutToShow in
  https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1664578

  It's a bit less important since less apps use it, but still seems to
  be enough used we should send it-

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1670639/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1664578] Re: Menus that fill themselves on QMenu::aboutToShow don't work

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: Nick Dedekind (nick-dedekind) => Albert Astals Cid (aacid)

** Changed in: qtubuntu (Ubuntu)
 Assignee: Nick Dedekind (nick-dedekind) => Albert Astals Cid (aacid)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1664578

Title:
  Menus that fill themselves on QMenu::aboutToShow don't work

Status in qtubuntu package in Ubuntu:
  Confirmed
Status in unity8 package in Ubuntu:
  Confirmed

Bug description:
  Our menu implementation doesn't trigger QMenu::aboutToShow so some
  menus in konsole and kate show up empty.

  QMenu::aboutToHide isn't sent either

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1664578/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1668982] [NEW] Backport memory leak fix

[Albert Astals Cid]

Public bug reported:

https://codereview.qt-project.org/#/c/187028/2

fixes a small memory leak that happens in some corner case.

It's not very important but nice to have.

** Affects: qtdeclarative-opensource-src (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtdeclarative-opensource-
src in Ubuntu.
https://bugs.launchpad.net/bugs/1668982

Title:
  Backport memory leak fix

Status in qtdeclarative-opensource-src package in Ubuntu:
  New

Bug description:
  https://codereview.qt-project.org/#/c/187028/2

  fixes a small memory leak that happens in some corner case.

  It's not very important but nice to have.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtdeclarative-opensource-src/+bug/1668982/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1666701] Re: unity8 freezes for a second while opening a client-side submenu in kate

[Albert Astals Cid]

** Branch linked: lp:~aacid/qmenumodel/batch_insert_remove_from_menu

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1666701

Title:
  unity8 freezes for a second while opening a client-side submenu in
  kate

Status in QtMir:
  Invalid
Status in qtubuntu package in Ubuntu:
  Invalid
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Steps:

  - Launch kate
  - Right-click on its main, text editor, area. A pop-up menu should show up.
  - Hover your mouse pointer over the "Bookmarks" menu item. A sub menu with 
"Set Bookmark" and "Clear All Bookmarks" options will show up.

  Expected outcome:
  The sub menu opens immediately and the mouse pointer is responsive throughout

  Actual outcome:
  unity8 freezes for a bit, with mouse pointer becoming unresponsive, before 
finally resuming and showing up the submenu.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qtmir/+bug/1666701/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1384374] Re: Dash pauses/stutters during scope switching left/right

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: Albert Astals Cid (aacid) => (unassigned)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1384374

Title:
  Dash pauses/stutters during scope switching left/right

Status in Canonical System Image:
  Won't Fix
Status in unity8 package in Ubuntu:
  Won't Fix

Bug description:
  Dash pauses/stutters during scope switching left/right.

  Watching the log:   tail -f ~/.cache/upstart/unity8-dash.log

  I can see error messages flood out whenever the dash pauses/stutters
  during left/right swipes:

  
file:///usr/lib/arm-linux-gnueabihf/unity8/qml/Dash/createCardComponent:120:1: 
QML Label: Binding loop detected for property "height"
  
file:///usr/lib/arm-linux-gnueabihf/unity8/qml/Dash/createCardComponent:120:1: 
QML Label: Binding loop detected for property "height"
  
file:///usr/lib/arm-linux-gnueabihf/unity8/qml/Dash/createCardComponent:120:1: 
QML Label: Binding loop detected for property "height"
  
file:///usr/lib/arm-linux-gnueabihf/unity8/qml/Dash/createCardComponent:120:1: 
QML Label: Binding loop detected for property "height"
  
file:///usr/lib/arm-linux-gnueabihf/unity8/qml/Dash/createCardComponent:120:1: 
QML Label: Binding loop detected for property "height"
  
file:///usr/lib/arm-linux-gnueabihf/unity8/qml/Dash/createCardComponent:120:1: 
QML Label: Binding loop detected for property "height"
  
file:///usr/lib/arm-linux-gnueabihf/unity8/qml/Dash/createCardComponent:120:1: 
QML Label: Binding loop detected for property "height"
  
file:///usr/lib/arm-linux-gnueabihf/unity8/qml/Dash/createCardComponent:120:1: 
QML Label: Binding loop detected for property "height"
  
file:///usr/lib/arm-linux-gnueabihf/unity8/qml/Dash/createCardComponent:120:1: 
QML Label: Binding loop detected for property "height"
  
file:///usr/lib/arm-linux-gnueabihf/unity8/qml/Dash/createCardComponent:120:1: 
QML Label: Binding loop detected for property "height"
  
file:///usr/lib/arm-linux-gnueabihf/unity8/qml/Dash/createCardComponent:120:1: 
QML Label: Binding loop detected for property "height"

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1384374/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1494795] Re: unity8-dash 100% CPU usage when scrolling

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: Albert Astals Cid (aacid) => (unassigned)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1494795

Title:
  unity8-dash 100% CPU usage when scrolling

Status in Canonical System Image:
  Triaged
Status in unity8 package in Ubuntu:
  Triaged

Bug description:
  i'm on meizu mx4 (stable channel -r4), when i scroll up and down on
  the apps scope, unity8-dash is at 100%CPU usage. i have 60 apps
  installed and the apps scope is laggy. another annoying thing is that
  random icons are missing when i scroll fast up and down. i can see the
  random icons load.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1494795/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1667620] [NEW] Opening the launcher should hide the "touch" menus

[Albert Astals Cid]

Public bug reported:

When opening the launcher the "touch menus" (those that look like the
indicators but on the left side of the screen) should hide

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1667620

Title:
  Opening the launcher should hide the "touch" menus

Status in unity8 package in Ubuntu:
  New

Bug description:
  When opening the launcher the "touch menus" (those that look like the
  indicators but on the left side of the screen) should hide

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1667620/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1666701] Re: unity8 freezes for a second while opening a client-side submenu in kate

[Albert Astals Cid]

** Changed in: qtubuntu (Ubuntu)
   Status: In Progress => Invalid

** Branch linked: lp:~aacid/unity8/dontCreateUnusedMenus

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1666701

Title:
  unity8 freezes for a second while opening a client-side submenu in
  kate

Status in QtMir:
  Invalid
Status in qtubuntu package in Ubuntu:
  Invalid
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Steps:

  - Launch kate
  - Right-click on its main, text editor, area. A pop-up menu should show up.
  - Hover your mouse pointer over the "Bookmarks" menu item. A sub menu with 
"Set Bookmark" and "Clear All Bookmarks" options will show up.

  Expected outcome:
  The sub menu opens immediately and the mouse pointer is responsive throughout

  Actual outcome:
  unity8 freezes for a bit, with mouse pointer becoming unresponsive, before 
finally resuming and showing up the submenu.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qtmir/+bug/1666701/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1657215] Re: "Highlighting" submenu in Kate is shown empty

[Albert Astals Cid]

*** This bug is a duplicate of bug 1664578 ***
https://bugs.launchpad.net/bugs/1664578

** This bug has been marked a duplicate of bug 1664578
   Menus that fill themselves on QMenu::aboutToShow don't work

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1657215

Title:
  "Highlighting" submenu in Kate is shown empty

Status in unity8 package in Ubuntu:
  New

Bug description:
  - Launch Kate
  - Click on "Tools" menu
  - Click on "Highlighting" menu item

  Expected outcome:
  - A submenu with around 11 items is shown

  Actual outcome:
  - An empty submenu is shown

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1657215/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1666950] Re: icons in app scope unusually large, zesty u8 deb

[Albert Astals Cid]

We removed special casing for app scope now that it's not "the way" to
show apps.

** Changed in: unity8 (Ubuntu)
   Status: Confirmed => Invalid

** Changed in: canonical-devices-system-image
   Status: New => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1666950

Title:
  icons in app scope unusually large, zesty u8 deb

Status in Canonical System Image:
  Invalid
Status in unity8 package in Ubuntu:
  Invalid

Bug description:
  updated to the latest in zesty
  the icons shown in the apps scope in the dash look unusually large
  they appear normal in the app drawer

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1666950/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1666859] Re: keyboard navigation in app menus not working the first time it is created

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
   Status: New => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1666859

Title:
  keyboard navigation in app menus not working the first time it is
  created

Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Steps to reproduce:

  * Start Kate (or any other app with nested app menus)
  * open some menu using the keyboard (e.g. in Kate, Alt+T for Tools)
  * use the keyboard to navigate down to an entry that has a submenu
  * press "right"

  => the first time such a submenu is created, the keyboard focus
  doesn't move to the submenu but stays in the parent menu. It works
  fine on the second attempt.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1666859/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1666859] Re: keyboard navigation in app menus not working the first time it is created

[Albert Astals Cid]

** Branch linked: lp:~aacid/unity8/select_first_submenu_when_it_appears

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1666859

Title:
  keyboard navigation in app menus not working the first time it is
  created

Status in unity8 package in Ubuntu:
  New

Bug description:
  Steps to reproduce:

  * Start Kate (or any other app with nested app menus)
  * open some menu using the keyboard (e.g. in Kate, Alt+T for Tools)
  * use the keyboard to navigate down to an entry that has a submenu
  * press "right"

  => the first time such a submenu is created, the keyboard focus
  doesn't move to the submenu but stays in the parent menu. It works
  fine on the second attempt.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1666859/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1666859] Re: keyboard navigation in app menus not working the first time it is created

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1666859

Title:
  keyboard navigation in app menus not working the first time it is
  created

Status in unity8 package in Ubuntu:
  New

Bug description:
  Steps to reproduce:

  * Start Kate (or any other app with nested app menus)
  * open some menu using the keyboard (e.g. in Kate, Alt+T for Tools)
  * use the keyboard to navigate down to an entry that has a submenu
  * press "right"

  => the first time such a submenu is created, the keyboard focus
  doesn't move to the submenu but stays in the parent menu. It works
  fine on the second attempt.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1666859/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1664610] Re: qtubuntu sends wrong text as part of QKeyEvent

[Albert Astals Cid]

Don't think so, Alt+Up/Alt+Down don't have text attached.

Also http://paste.ubuntu.com/24045824/ seems to report the same presses
in both unity7 and unity8

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mir in Ubuntu.
https://bugs.launchpad.net/bugs/1664610

Title:
  qtubuntu sends wrong text as part of QKeyEvent

Status in Mir:
  Fix Committed
Status in mir package in Ubuntu:
  New
Status in qtubuntu package in Ubuntu:
  In Progress

Bug description:
  When using Unity7 or Plasma a key event created by Ctrl+C is
    QKeyEvent(KeyPress, Key_C, ControlModifier, text="\u0003")

  But Unity8+ qtubuntu send to the application
    QKeyEvent(KeyPress, Key_C, ControlModifier, text="c")

  This is most likely because QMirClientInput::dispatchKeyEvent is using
  xkb_keysym_to_utf8 to get the text of the event instead of using
  xkb_state_key_get_utf8

  This breaks for example Konsole that expects the correct text to be
  sent.

To manage notifications about this bug go to:
https://bugs.launchpad.net/mir/+bug/1664610/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1666530] [NEW] valgrind reports several qtubuntu leaks on exit

[Albert Astals Cid]

Public bug reported:

I know most of these are probably "fine" since it's memory that we were
using until the last minute and then did not delete, but it's always
nice if one can cleanup properly so it's easier to differentiate between
a "this is not a memory leak you were using the memory until the last
minute and i was lazy to cleanup" leak and a "this is really a memory
leak" situations.

Example: http://paste.ubuntu.com/24040448/

** Affects: qtubuntu (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1666530

Title:
  valgrind reports several qtubuntu leaks on exit

Status in qtubuntu package in Ubuntu:
  New

Bug description:
  I know most of these are probably "fine" since it's memory that we
  were using until the last minute and then did not delete, but it's
  always nice if one can cleanup properly so it's easier to
  differentiate between a "this is not a memory leak you were using the
  memory until the last minute and i was lazy to cleanup" leak and a
  "this is really a memory leak" situations.

  Example: http://paste.ubuntu.com/24040448/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1666530/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1666158] Re: [unity8] closing ALT F4 a window leaves the mouse pointer in a weird state

[Albert Astals Cid]

** Branch linked: lp:~aacid/unity8/cursorUpdateOnWindowClose

** Changed in: unity8 (Ubuntu)
   Status: Confirmed => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1666158

Title:
  [unity8] closing ALT F4 a window leaves the mouse pointer in a weird
  state

Status in Canonical System Image:
  New
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  ubuntu 17.04 unity8

  open random app, move the mouse to resize the app (the mouse pointer
  changes to the resize window pointer), press ALT F4 to close the app,
  you are now left with a mouse pointer that indicates resize, see
  attached screenshot

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1666158/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1666158] Re: [unity8] closing ALT F4 a window leaves the mouse pointer in a weird state

[Albert Astals Cid]

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Albert Astals Cid (aacid)

** Changed in: unity8 (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1666158

Title:
  [unity8] closing ALT F4 a window leaves the mouse pointer in a weird
  state

Status in Canonical System Image:
  New
Status in unity8 package in Ubuntu:
  Confirmed

Bug description:
  ubuntu 17.04 unity8

  open random app, move the mouse to resize the app (the mouse pointer
  changes to the resize window pointer), press ALT F4 to close the app,
  you are now left with a mouse pointer that indicates resize, see
  attached screenshot

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1666158/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665281] Re: [unity8] drag and drop crashes the app

[Albert Astals Cid]

Note to reproducers, at least on kate it only happens on second drag, cause is:
 a) qtubuntu doesn't implement drag
 b) default drag implementation uses a QRasterWindow that crashes 
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1665705

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1665281

Title:
  [unity8] drag and drop crashes the app

Status in Canonical System Image:
  New
Status in qtubuntu package in Ubuntu:
  New

Bug description:
  ubuntu 17.04 unity8

  start kate or qupzilla or whatever
  select a text and then drag and drop outside the window
  the app crahes

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1665281/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665705] [NEW] Deleting a QRasterWindow crashes

[Albert Astals Cid]

Public bug reported:

The attached program crashes when run under unity8/qtubuntu, works fine
with other QPAs

terminal log says "pure virtual method called"

** Affects: qtubuntu (Ubuntu)
 Importance: Critical
 Assignee: Gerry Boland (gerboland)
 Status: Confirmed

** Attachment added: "main.cpp"
   https://bugs.launchpad.net/bugs/1665705/+attachment/4820928/+files/main.cpp

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1665705

Title:
  Deleting a QRasterWindow crashes

Status in qtubuntu package in Ubuntu:
  Confirmed

Bug description:
  The attached program crashes when run under unity8/qtubuntu, works
  fine with other QPAs

  terminal log says "pure virtual method called"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1665705/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665682] [NEW] Popup menus stop working correctly after changing VT

[Albert Astals Cid]

Public bug reported:

My setup:
 * unity8-greeter as greeter
 * Logg in as user A to unity7 in VT8
 * Go back to the greeter 
 * Log in as user B to unity8 in VT7
 * Start kate
 * Right mouse button click on the document area
 * See popup menu correctly
 * close kate
 * Now change to VT8
 * Now change to VT7
 * Start kate
 * Right mouse button click on the document area
 * See popup menu just shows for a brief moment and hides immediately
https://www.youtube.com/watch?v=f9aSC3CvCTs

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1665682

Title:
  Popup menus stop working correctly after changing VT

Status in unity8 package in Ubuntu:
  New

Bug description:
  My setup:
   * unity8-greeter as greeter
   * Logg in as user A to unity7 in VT8
   * Go back to the greeter 
   * Log in as user B to unity8 in VT7
   * Start kate
   * Right mouse button click on the document area
   * See popup menu correctly
   * close kate
   * Now change to VT8
   * Now change to VT7
   * Start kate
   * Right mouse button click on the document area
   * See popup menu just shows for a brief moment and hides immediately
  https://www.youtube.com/watch?v=f9aSC3CvCTs

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1665682/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1664636] Re: Ubuntu Components is hard on the disk and CPU when loading @gu images

[Albert Astals Cid]

PNG file used by the test

** Attachment added: "roundf...@2.png"
   
https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1664636/+attachment/4818920/+files/roundface%402.png

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1664636

Title:
  Ubuntu Components is hard on the disk and CPU when loading @gu images

Status in ubuntu-ui-toolkit package in Ubuntu:
  New

Bug description:
   * Take the following simple example of a listview with an image.
   * run it with strace qmlscene
   * scroll the list to the bottom

  I understand that some of this overhead is needed since we need to
  find the best @gu image for the given grid units, but doing it again
  and again for the same file seems a bit of overkill, maybe we could
  cache that?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1664636/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp