[Touch-packages] [Bug 1586528] Re: Avahi-daemon withdraws address record
I am also seeing this same problem on a Raspberry Pi4 4GB. I purchased the Pi last November and installed from the then-available 2019-09-26-raspbian-buster.zip but routinely keep it updated (apt update / apt upgrade). The Pi was rock solid and did not exhibit any problems until 2020-02-24 when I applied some updates followed by a "sudo reboot" but the boot process did not complete. The Pi runs headless so I don't know whether it never actually completed the shutdown, or failed to reboot. I power- cycled the device and it came back OK. Another set of updates were applied on 2020-03-11 and the subsequent reboot completed without incident so I assumed the earlier problem was a one-off. Then, on 2020-03-14 the Pi froze. Wouldn't respond to pings, ssh or vnc. It is Ethernet-connected but the WiFi interface is active and it did not occur to me to try connecting via WiFi. I just did another power-cycle and then started nosing around through the logs. Which brought me to: Mar 14 12:48:16 iot-hub avahi-daemon[361]: Withdrawing address record for 192.168.132.60 on eth0. Mar 14 12:48:16 iot-hub avahi-daemon[361]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.132.60. Mar 14 12:48:16 iot-hub avahi-daemon[361]: Interface eth0.IPv4 no longer relevant for mDNS. and, from there, to this post. The main reasons I'm adding a comment to this post are (a) as a "me too" as of March 2020, and (b) in case the pattern of the RPi being perfectly OK until 2020-02-24 causes someone to say "ahah!" The updates in question were (from the history log): Upgrade: libpython3.7-minimal:armhf (3.7.3-2, 3.7.3-2+deb10u1), libraspberrypi- bin:armhf (1.20200114-1, 1.20200212-1), libopenjp2-7:armhf (2.3.0-2, 2.3.0-2+deb10u1), rc-gui:armhf (1.34, 1.36), libcom-err2:armhf (1.44.5-1+deb10u2, 1.44.5-1+deb10u3), libcups2:armhf (2.2.10-6+deb10u1, 2.2.10-6+deb10u2), libraspberrypi-dev:armhf (1.20200114-1, 1.20200212-1), libraspberrypi-doc:armhf (1.20200114-1, 1.20200212-1), python3.7-venv:armhf (3.7.3-2, 3.7.3-2+deb10u1), raspberrypi-ui- mods:armhf (1.20200127, 1.20200218), qt5-gtk-platformtheme:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libfm4:armhf (1.3.1-1+rpt12, 1.3.1-1+rpt13), libsystemd0:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), raspi-config:armhf (20200205, 20200207), libfm- modules:armhf (1.3.1-1+rpt12, 1.3.1-1+rpt13), libfm-extra4:armhf (1.3.1-1+rpt12, 1.3.1-1+rpt13), mariadb-common:armhf (1:10.3.17-0+deb10u1, 1:10.3.22-0+deb10u1), binutils:armhf (2.31.1-16+rpi1, 2.31.1-16+rpi2), e2fsprogs:armhf (1.44.5-1+deb10u2, 1.44.5-1+deb10u3), sudo:armhf (1.8.27-1+deb10u1, 1.8.27-1+deb10u2), libqt5dbus5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libqt5sql5-sqlite:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), python3-pil:armhf (5.4.1-2, 5.4.1-2+deb10u1), libpython3.7:armhf (3.7.3-2, 3.7.3-2+deb10u1), python3.7:armhf (3.7.3-2, 3.7.3-2+deb10u1), openssh-sftp-server:armhf (1:7.9p1-10+deb10u1, 1:7.9p1-10+deb10u2), libqt5widgets5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libfm-gtk4:armhf (1.3.1-1+rpt12, 1.3.1-1+rpt13), udev:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), python3.7-dev:armhf (3.7.3-2, 3.7.3-2+deb10u1), binutils-arm-linux-gnueabihf:armhf (2.31.1-16+rpi1, 2.31.1-16+rpi2), libpython3.7-stdlib:armhf (3.7.3-2, 3.7.3-2+deb10u1), libudev1:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), python3.7-minimal:armhf (3.7.3-2, 3.7.3-2+deb10u1), libqt5xml5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libqt5printsupport5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), raspberrypi- kernel:armhf (1.20200114-1, 1.20200212-1), libss2:armhf (1.44.5-1+deb10u2, 1.44.5-1+deb10u3), libqt5concurrent5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libext2fs2:armhf (1.44.5-1+deb10u2, 1.44.5-1+deb10u3), raspberrypi-bootloader:armhf (1.20200114-1, 1.20200212-1), libexif12:armhf (0.6.21-5.1, 0.6.21-5.1+deb10u1), libqt5gui5:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), libimobiledevice6:armhf (1.2.1~git20181030.92c5462-1, 1.2.1~git20181030.92c5462-2), gldriver- test:armhf (0.4, 0.5), ssh:armhf (1:7.9p1-10+deb10u1, 1:7.9p1-10+deb10u2), systemd-sysv:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), guile-2.2-libs:armhf (2.2.4+1-2, 2.2.4+1-2+deb10u1), realvnc-vnc-server:armhf (6.6.0.41949, 6.7.1.42348), libpython3.7-dev:armhf (3.7.3-2, 3.7.3-2+deb10u1), libpam-systemd:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), libmatroska6v5:armhf (1.4.9-1, 1.4.9-1+deb10u1), systemd:armhf (241-7~deb10u2+rpi1, 241-7~deb10u3+rpi1), libwebkit2gtk-4.0-37:armhf (2.26.3-1~deb10u1+rpi1, 2.26.4-1~deb10u1+rpi1), libqt5core5a:armhf (5.11.3+dfsg1-1+rpi1, 5.11.3+dfsg1-1+rpi1+deb10u3), piwiz:armhf (0.8, 0.9), libraspberrypi0:armhf (1.20200114-1, 1.20200212-1), openssh-server:armhf (1:7.9p1-10+deb10u1, 1:7.9p1-10+deb10u2), openssh-client:armhf (1:7.9p1-10+deb10u1, 1:7.9p1-10+deb10u2), libmysofa0:armhf (0.6~dfsg0-3, 0.6~dfsg0-3+deb10u1), rpi-chromium-mods:armhf
[Touch-packages] [Bug 1773516] Re: [Lenovo Yoga 300-11IBY] Right click not working
*** This bug is a duplicate of bug 1759300 *** https://bugs.launchpad.net/bugs/1759300 Although the buttons are integral to the touchpad, they are clearly marked with a dividing line. Having read the proposed duplicate, while this issue may have the same underlying cause, this is not a mere configuration preference on this device because it has clearly identified buttons, albeit with nothing more than a coloured dividing line. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1773516 Title: [Lenovo Yoga 300-11IBY] Right click not working Status in xorg package in Ubuntu: Incomplete Bug description: The right click is not working on Lenovo Yoga touch pad after upgrade to 18.04, worked minutes before on 17.10. I think it works on the Think Pad out-of-the-box (after upgrade from 17.10), if that helps. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sat May 26 10:34:57 2018 DistUpgraded: 2018-05-25 23:14:56,258 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: virtualbox, 5.2.10, 4.13.0-39-generic, x86_64: installed virtualbox, 5.2.10, 4.15.0-22-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e) (prog-if 00 [VGA controller]) Subsystem: Lenovo Atom Processor Z36xxx/Z37xxx Series Graphics & Display [17aa:3908] InstallationDate: Installed on 2018-01-18 (128 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) MachineType: LENOVO 80M0 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-22-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to bionic on 2018-05-25 (0 days ago) dmi.bios.date: 07/30/2015 dmi.bios.vendor: LENOVO dmi.bios.version: C0CN31WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Mini dmi.board.vendor: LENOVO dmi.board.version: SDK0J33995WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo YOGA 300-11IBY dmi.modalias: dmi:bvnLENOVO:bvrC0CN31WW:bd07/30/2015:svnLENOVO:pn80M0:pvrLenovoYOGA300-11IBY:rvnLENOVO:rnMini:rvrSDK0J33995WIN:cvnLENOVO:ct10:cvrLenovoYOGA300-11IBY: dmi.product.family: IDEAPAD dmi.product.name: 80M0 dmi.product.version: Lenovo YOGA 300-11IBY dmi.sys.vendor: LENOVO version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.91-2 version.libgl1-mesa-dri: libgl1-mesa-dri 18.0.0~rc5-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 18.0.0~rc5-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1773516/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1773516] [NEW] Right click not working on Lenovo touchpad
Public bug reported: The right click is not working on Lenovo Yoga touch pad after upgrade to 18.04, worked minutes before on 17.10. I think it works on the Think Pad out-of-the-box (after upgrade from 17.10), if that helps. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sat May 26 10:34:57 2018 DistUpgraded: 2018-05-25 23:14:56,258 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: virtualbox, 5.2.10, 4.13.0-39-generic, x86_64: installed virtualbox, 5.2.10, 4.15.0-22-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e) (prog-if 00 [VGA controller]) Subsystem: Lenovo Atom Processor Z36xxx/Z37xxx Series Graphics & Display [17aa:3908] InstallationDate: Installed on 2018-01-18 (128 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) MachineType: LENOVO 80M0 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-22-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to bionic on 2018-05-25 (0 days ago) dmi.bios.date: 07/30/2015 dmi.bios.vendor: LENOVO dmi.bios.version: C0CN31WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Mini dmi.board.vendor: LENOVO dmi.board.version: SDK0J33995WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo YOGA 300-11IBY dmi.modalias: dmi:bvnLENOVO:bvrC0CN31WW:bd07/30/2015:svnLENOVO:pn80M0:pvrLenovoYOGA300-11IBY:rvnLENOVO:rnMini:rvrSDK0J33995WIN:cvnLENOVO:ct10:cvrLenovoYOGA300-11IBY: dmi.product.family: IDEAPAD dmi.product.name: 80M0 dmi.product.version: Lenovo YOGA 300-11IBY dmi.sys.vendor: LENOVO version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.91-2 version.libgl1-mesa-dri: libgl1-mesa-dri 18.0.0~rc5-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 18.0.0~rc5-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1773516 Title: Right click not working on Lenovo touchpad Status in xorg package in Ubuntu: New Bug description: The right click is not working on Lenovo Yoga touch pad after upgrade to 18.04, worked minutes before on 17.10. I think it works on the Think Pad out-of-the-box (after upgrade from 17.10), if that helps. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sat May 26 10:34:57 2018 DistUpgraded: 2018-05-25 23:14:56,258 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: virtualbox, 5.2.10, 4.13.0-39-generic, x86_64: installed virtualbox, 5.2.10, 4.15.0-22-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e) (prog-if 00 [VGA controller]) Subsystem: Lenovo Atom Processor Z36xxx/Z37xxx Series Graphics & Display [17aa:3908] InstallationDate: Installed on 2018-01-18 (128 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) MachineType: LENOVO 80M0 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-22-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to bionic on 2018-05-25 (0 days ago) dmi.bios.date: 07/30/2015 dmi.bios.vendor: LENOVO dmi.bios.version: C0CN31WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Mini dmi.board.vendor: LENOVO dmi.board.version: SDK0J33995WIN dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version:
[Touch-packages] [Bug 1665598] Re: python-crypto throws exception ValueError: CTR mode needs counter parameter, not IV
Sorry, I commented on the wrong bug, I think #1665643 may be a duplicate or dependency on this. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to python-crypto in Ubuntu. https://bugs.launchpad.net/bugs/1665598 Title: python-crypto throws exception ValueError: CTR mode needs counter parameter, not IV Status in OpenStack Charm Test Infra: Confirmed Status in python-crypto package in Ubuntu: Fix Released Bug description: We've recently upgraded python-crypto package on 14.04 due to this USN https://www.ubuntu.com/usn/usn-3199-1/ apt history log ``` Start-Date: 2017-02-16 23:43:48 Commandline: apt-get -q -y -o DPkg::Options::=--force-confold -o DPkg::Options::=--force-confdef dist-upgrade Upgrade: bind9-host:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), liblwres90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), python-crypto:amd64 (2.6.1-4build1, 2.6.1-4ubuntu0.1), libdns100:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccfg90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libbind9-90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), dnsutils:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9utils:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccc90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisc95:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13) End-Date: 2017-02-16 23:43:52 ``` Then our python script which uses paramiko failed with this exception ``` Traceback (most recent call last): File "/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", line 1583, in run self.kex_engine.parse_next(ptype, m) File "/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", line 68, in parse_next return self._parse_kexdh_reply(m) File "/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", line 107, in _parse_kexdh_reply self.transport._activate_outbound() File "/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", line 1881, in _activate_outbound engine = self._get_cipher(self.local_cipher, key_out, IV_out) File "/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", line 1500, in _get_cipher return self._cipher_info[name]['class'].new(key, self._cipher_info[name]['mode'], iv, counter) File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in new return AESCipher(key, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in __init__ blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 141, in __init__ self._cipher = factory.new(key, *args, **kwargs) ValueError: CTR mode needs counter parameter, not IV ``` packages versions ``` pycrypto==2.6.1 paramiko==1.12.0 ``` which works okay BEFORE the upgrade. Maybe Debian bug report: https://bugs.debian.org/cgi- bin/bugreport.cgi?bug=850025 To manage notifications about this bug go to: https://bugs.launchpad.net/charm-test-infra/+bug/1665598/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1665598] Re: python-crypto throws exception ValueError: CTR mode needs counter parameter, not IV
Possible duplicate of #1665598 or maybe just a dependency, depends on point of view. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to python-crypto in Ubuntu. https://bugs.launchpad.net/bugs/1665598 Title: python-crypto throws exception ValueError: CTR mode needs counter parameter, not IV Status in OpenStack Charm Test Infra: Confirmed Status in python-crypto package in Ubuntu: Fix Released Bug description: We've recently upgraded python-crypto package on 14.04 due to this USN https://www.ubuntu.com/usn/usn-3199-1/ apt history log ``` Start-Date: 2017-02-16 23:43:48 Commandline: apt-get -q -y -o DPkg::Options::=--force-confold -o DPkg::Options::=--force-confdef dist-upgrade Upgrade: bind9-host:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), liblwres90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), python-crypto:amd64 (2.6.1-4build1, 2.6.1-4ubuntu0.1), libdns100:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccfg90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libbind9-90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), dnsutils:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9utils:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccc90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisc95:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13) End-Date: 2017-02-16 23:43:52 ``` Then our python script which uses paramiko failed with this exception ``` Traceback (most recent call last): File "/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", line 1583, in run self.kex_engine.parse_next(ptype, m) File "/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", line 68, in parse_next return self._parse_kexdh_reply(m) File "/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", line 107, in _parse_kexdh_reply self.transport._activate_outbound() File "/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", line 1881, in _activate_outbound engine = self._get_cipher(self.local_cipher, key_out, IV_out) File "/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", line 1500, in _get_cipher return self._cipher_info[name]['class'].new(key, self._cipher_info[name]['mode'], iv, counter) File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in new return AESCipher(key, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in __init__ blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 141, in __init__ self._cipher = factory.new(key, *args, **kwargs) ValueError: CTR mode needs counter parameter, not IV ``` packages versions ``` pycrypto==2.6.1 paramiko==1.12.0 ``` which works okay BEFORE the upgrade. Maybe Debian bug report: https://bugs.debian.org/cgi- bin/bugreport.cgi?bug=850025 To manage notifications about this bug go to: https://bugs.launchpad.net/charm-test-infra/+bug/1665598/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1585863] Re: WiFi malfunction after suspend & resume stress - sudo wpa_cli scan required to fix it.
@auspex In my experience the physical act of bringing a computer out of suspend takes longer than network manager takes to restart and reconnect (well under 0.5 seconds). It's not only negligible, but I think it's inevitable that there will be some latency in reconnecting after suspend. I have to agree with other comments supporting the restart workaround. However, it's clear this issue is not going to see any action. Does anyone know of a Debian that's not affected? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1585863 Title: WiFi malfunction after suspend & resume stress - sudo wpa_cli scan required to fix it. Status in NetworkManager: New Status in OEM Priority Project: New Status in OEM Priority Project xenial series: New Status in network-manager package in Ubuntu: Confirmed Bug description: Description:Ubuntu Yakkety Yak (development branch) Release:16.10 Packages: libnm-glib-vpn1:amd64 1.2.2-0ubuntu2 libnm-glib4:amd64 1.2.2-0ubuntu2 libnm-util2:amd64 1.2.2-0ubuntu2 libnm0:amd641.2.2-0ubuntu2 network-manager 1.2.2-0ubuntu2 Reproduce steps: 1. Install fwts by `sudo apt-get install fwts`. 2. Run the suspend & resume stress test. sudo fwts s3 --s3-multiple=30 --s3-min-delay=5 --s3-max-delay=5 --s3-delay-delta=5 Expected result: The WiFi still functioned. Actual result: The WiFi can not connect to any access point and we have to execute `sudo wpa_cli scan` manually to make it work again. P.S. Ubuntu 16.04 also has the same issue. To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1585863/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 615239] Re: Every Wi-Fi disconnection is treated as an authentication error
There is a potential security issue here. Whenever a legitimate program is seen asking for a password as the result of an automatic operation people come to think of it as normal. This undermines the suspicion that we would otherwise encourage in people to help them avoid scams and malicious software. A more serious security issue arises if you are using a normal user account and the connection in question is shared. In this case you get a second dialogue box asking for an administrator password for privilege escalation. In this case we have users socially engineered to provide privilege escalation to any user-space program that impersonates this bug. I think it would be preferable that it didn't ask for a password (even if we know that's what's wrong) and just retried from time-to-time. If the user wants to remedy the situation they can just go through what they did first time they connected, at least then they expect to be asked for a password so no harm is done. Observations based on 16.04. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/615239 Title: Every Wi-Fi disconnection is treated as an authentication error Status in Canonical System Image: Confirmed Status in NetworkManager: Confirmed Status in network-manager package in Ubuntu: Confirmed Bug description: Binary package hint: network-manager I'm using lucid, with the 0.8-0ubuntu3, in a laptop, and is incredible that the nm-applet couldn't diagnostic why the wireless connection was lost and only trow the password prompt when I've lost the signal. nm-applet should see the kern.log or dmesg to react at signal lost. For example, when the kernel try 3 times probe the AP and don't get response nm-applet say The pc are far away from the access point and can not be connected. Please, move close to the access point or try another more near. And by the way, when the authentication fails, or the association. --- Architecture: i386 CRDA: Error: [Errno 2] No existe el archivo o directorio CheckboxSubmission: ee8ebec101005ce57a9c3355b36ca8a7 CheckboxSystem: edda5d4f616ca792bf437989cb597002 DistroRelease: Ubuntu 10.04 IfupdownConfig: auto lo iface lo inet loopback InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429) IpRoute: 172.16.254.0/24 dev wlan1 proto kernel scope link src 172.16.254.5 metric 2 169.254.0.0/16 dev wlan1 scope link metric 1000 default via 172.16.254.200 dev wlan1 proto static Keyfiles: Error: [Errno 2] No existe el archivo o directorio Package: network-manager 0.8-0ubuntu3 PackageArchitecture: i386 ProcEnviron: PATH=(custom, no user) LANG=es_DO.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: lucid Uname: Linux 2.6.32-24-generic i686 UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/615239/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1495063] Re: Networking occasionally doesn't recover from suspend
*** This bug is a duplicate of bug 1380480 *** https://bugs.launchpad.net/bugs/1380480 Not a duplicate of #1380480 as that bug report clearly states that disabling and enabling networking in the applet restores the network. This bug report clearly states that has been tried and does not work. Note that since 16.04 I've been getting this on all computers that I have and a lot more frequently. A separate bug has been raised for that as it was a different operating system and affects different hardware. See #1589125. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1495063 Title: Networking occasionally doesn't recover from suspend Status in network-manager package in Ubuntu: New Bug description: Occasionally, networking is disabled upon recovery from suspend. Clicking "Enable Networking" on the menu from the notification icon has no effect. It requires network-manager to be restarted with `service network-manager restart`. I can't identify a pattern to the problem. I can suspend the computer for minutes or hours without it happening. I've not noticed it on other computers running 14.04 that I have, so it's probably limited to my this particular hardware. I didn't notice it on previous versions of Ubuntu on this hardware. However, due to the nature of the problem it will not be practical to bisect the kernel as I don't have a reliable method of reproducing the fault as of yet. My network devices are as follows (I use the wireless one only): Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02) Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7.1 ProcVersionSignature: Ubuntu 3.16.0-48.64~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-48-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Sat Sep 12 12:44:30 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-07-13 (60 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) IpRoute: default via 192.168.1.1 dev wlan1 proto static 192.168.1.0/24 dev wlan1 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMPTIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH HTC Portable Hotspot DF99 b31b75bc-5b76-4592-9b4a-d9d860ea34aa 802-11-wireless 1441832180 Wed 09 Sep 2015 21:56:20 BST yes no /org/freedesktop/NetworkManager/Settings/1 TALKTALK-D069DC 700ea4cb-a660-479e-aa32-c00ad71e9064 802-11-wireless 1442058263 Sat 12 Sep 2015 12:44:23 BST yes no /org/freedesktop/NetworkManager/Settings/0 nmcli-dev: DEVICE TYPE STATE DBUS-PATH eth1 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/1 wlan1 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1495063/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1589125] Re: WiFi does not work after about 1 in 4 suspends
*** This bug is a duplicate of bug 1585863 *** https://bugs.launchpad.net/bugs/1585863 Probably not a duplicate of #1585863 because that bug says that the network can be restored by performing `sudo wpa_cli scan`. I just tried this and it does not work for me, only `sudo service network-manager restart` seems to work as indicated in the bug description. ** Description changed: Steps: Suspend, wait, resume, a few times. The Network Manager applet shows WiFi is enabled and shows just one or a handful of WiFi names, they don't include some that are known to be available and in use on other computers. Disabling and enabling WiFi does not fix the problem. Disabling and enabling networking does not fix the problem. Adding the following does not help: - /etc/pm/config.d/unload_modules + /etc/pm/config.d/unload_modules SUSPEND_MODULES="$SUSPEND_MODULES iwlwifi" + + Running `sudo wpa_cli scan` does not restore the network connection. I + only mention this because of a similar bug where this is an effective + workaround. Only workaround which works perfectly and instantly is to run: sudo service network-manager restart ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager 1.2.0-0ubuntu0.16.04.2 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Sat Jun 4 18:18:50 2016 IfupdownConfig: - # interfaces(5) file used by ifup(8) and ifdown(8) - auto lo - iface lo inet loopback + # interfaces(5) file used by ifup(8) and ifdown(8) + auto lo + iface lo inet loopback InstallationDate: Installed on 2016-05-30 (4 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: - default via 192.168.43.1 dev wlp2s0 proto static metric 600 - 169.254.0.0/16 dev wlp2s0 scope link metric 1000 - 192.168.43.0/24 dev wlp2s0 proto kernel scope link src 192.168.43.89 metric 600 + default via 192.168.43.1 dev wlp2s0 proto static metric 600 + 169.254.0.0/16 dev wlp2s0 scope link metric 1000 + 192.168.43.0/24 dev wlp2s0 proto kernel scope link src 192.168.43.89 metric 600 NetworkManager.state: - [main] - NetworkingEnabled=true - WirelessEnabled=true - WWANEnabled=true + [main] + NetworkingEnabled=true + WirelessEnabled=true + WWANEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: - DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH - wlp2s0 wifi connected/org/freedesktop/NetworkManager/Devices/0 HTC Portable Hotspot DF99 c29b59ba-b6ef-49db-b159-75ec21d3f436 /org/freedesktop/NetworkManager/ActiveConnection/0 - enp1s0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- - lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/2 -- ---- + DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH + wlp2s0 wifi connected/org/freedesktop/NetworkManager/Devices/0 HTC Portable Hotspot DF99 c29b59ba-b6ef-49db-b159-75ec21d3f436 /org/freedesktop/NetworkManager/ActiveConnection/0 + enp1s0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- + lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/2 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1589125 Title: WiFi does not work after about 1 in 4 suspends Status in network-manager package in Ubuntu: Confirmed Bug description: Steps: Suspend, wait, resume, a few times. The Network Manager applet shows WiFi is enabled and shows just one or a handful of WiFi names, they don't include some that are known to be available and in use on other computers. Disabling and enabling WiFi does not fix the problem. Disabling and enabling networking does not fix the problem. Adding the following does not help: /etc/pm/config.d/unload_modules SUSPEND_MODULES="$SUSPEND_MODULES iwlwifi" Running `sudo wpa_cli scan` does not restore the network connection. I only mention this because of a similar bug where this is an effective
[Touch-packages] [Bug 1589125] Re: WiFi does not work after about 1 in 4 suspends
*** This bug is a duplicate of bug 1576747 *** https://bugs.launchpad.net/bugs/1576747 Maybe not a duplicate of 1576747 as I have no network communication on resume. The description of 1576747 states "Oddly enough, I'm still able to communicate on the network that I was connected to prior to suspend". -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1589125 Title: WiFi does not work after about 1 in 4 suspends Status in network-manager package in Ubuntu: Confirmed Bug description: Steps: Suspend, wait, resume, a few times. The Network Manager applet shows WiFi is enabled and shows just one or a handful of WiFi names, they don't include some that are known to be available and in use on other computers. Disabling and enabling WiFi does not fix the problem. Disabling and enabling networking does not fix the problem. Adding the following does not help: /etc/pm/config.d/unload_modules SUSPEND_MODULES="$SUSPEND_MODULES iwlwifi" Only workaround which works perfectly and instantly is to run: sudo service network-manager restart ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager 1.2.0-0ubuntu0.16.04.2 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Sat Jun 4 18:18:50 2016 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-05-30 (4 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: default via 192.168.43.1 dev wlp2s0 proto static metric 600 169.254.0.0/16 dev wlp2s0 scope link metric 1000 192.168.43.0/24 dev wlp2s0 proto kernel scope link src 192.168.43.89 metric 600 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlp2s0 wifi connected/org/freedesktop/NetworkManager/Devices/0 HTC Portable Hotspot DF99 c29b59ba-b6ef-49db-b159-75ec21d3f436 /org/freedesktop/NetworkManager/ActiveConnection/0 enp1s0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/2 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1589125/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1495063] Re: Networking occasionally doesn't recover from suspend
I have also confirmed this problem on a completely different computer, it uses the ath9k driver: $ lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01) 02:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 70) sudo lshw -C network [sudo] password for phill: *-network description: Wireless interface product: AR9287 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@:01:00.0 logical name: wlp1s0 version: 01 serial: 64:70:02:6e:fe:03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=4.4.0-22-generic firmware=N/A ip=192.168.43.218 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:feaf-feaf -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1495063 Title: Networking occasionally doesn't recover from suspend Status in network-manager package in Ubuntu: New Bug description: Occasionally, networking is disabled upon recovery from suspend. Clicking "Enable Networking" on the menu from the notification icon has no effect. It requires network-manager to be restarted with `service network-manager restart`. I can't identify a pattern to the problem. I can suspend the computer for minutes or hours without it happening. I've not noticed it on other computers running 14.04 that I have, so it's probably limited to my this particular hardware. I didn't notice it on previous versions of Ubuntu on this hardware. However, due to the nature of the problem it will not be practical to bisect the kernel as I don't have a reliable method of reproducing the fault as of yet. My network devices are as follows (I use the wireless one only): Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02) Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7.1 ProcVersionSignature: Ubuntu 3.16.0-48.64~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-48-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Sat Sep 12 12:44:30 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-07-13 (60 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) IpRoute: default via 192.168.1.1 dev wlan1 proto static 192.168.1.0/24 dev wlan1 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME
[Touch-packages] [Bug 1589125] [NEW] WiFi does not work after about 1 in 4 suspends
Public bug reported: Steps: Suspend, wait, resume, a few times. The Network Manager applet shows WiFi is enabled and shows just one or a handful of WiFi names, they don't include some that are known to be available and in use on other computers. Disabling and enabling WiFi does not fix the problem. Disabling and enabling networking does not fix the problem. Adding the following does not help: /etc/pm/config.d/unload_modules SUSPEND_MODULES="$SUSPEND_MODULES iwlwifi" Only workaround which works perfectly and instantly is to run: sudo service network-manager restart ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager 1.2.0-0ubuntu0.16.04.2 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Sat Jun 4 18:18:50 2016 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-05-30 (4 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: default via 192.168.43.1 dev wlp2s0 proto static metric 600 169.254.0.0/16 dev wlp2s0 scope link metric 1000 192.168.43.0/24 dev wlp2s0 proto kernel scope link src 192.168.43.89 metric 600 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlp2s0 wifi connected/org/freedesktop/NetworkManager/Devices/0 HTC Portable Hotspot DF99 c29b59ba-b6ef-49db-b159-75ec21d3f436 /org/freedesktop/NetworkManager/ActiveConnection/0 enp1s0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/2 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1589125 Title: WiFi does not work after about 1 in 4 suspends Status in network-manager package in Ubuntu: New Bug description: Steps: Suspend, wait, resume, a few times. The Network Manager applet shows WiFi is enabled and shows just one or a handful of WiFi names, they don't include some that are known to be available and in use on other computers. Disabling and enabling WiFi does not fix the problem. Disabling and enabling networking does not fix the problem. Adding the following does not help: /etc/pm/config.d/unload_modules SUSPEND_MODULES="$SUSPEND_MODULES iwlwifi" Only workaround which works perfectly and instantly is to run: sudo service network-manager restart ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager 1.2.0-0ubuntu0.16.04.2 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Sat Jun 4 18:18:50 2016 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-05-30 (4 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: default via 192.168.43.1 dev wlp2s0 proto static metric 600 169.254.0.0/16 dev wlp2s0 scope link metric 1000 192.168.43.0/24 dev wlp2s0 proto kernel scope link src 192.168.43.89 metric 600 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlp2s0 wifi connected/org/freedesktop/NetworkManager/Devices/0 HTC Portable Hotspot DF99 c29b59ba-b6ef-49db-b159-75ec21d3f436 /org/freedesktop/NetworkManager/ActiveConnection/0 enp1s0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- lo loopback
[Touch-packages] [Bug 1549529] Re: The keyboard is still installed as US-English even if another language is selected during the installation
Mathieu Trudel-Lapierre you are a little angel. This is not the 1st bug I've been following where your clean pair of eyes and attitude solves things quickly. I'll say thank-you and break bug rules. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to console-setup in Ubuntu. https://bugs.launchpad.net/bugs/1549529 Title: The keyboard is still installed as US-English even if another language is selected during the installation Status in casper package in Ubuntu: Invalid Status in console-setup package in Ubuntu: In Progress Bug description: - Particularly serious in UEFI mode (when grub is the only boot loader). - Affects at least Lubuntu and Xubuntu - Affects not only Swedish, at least also French, probably all languages except US-English. - Workaround: If I install Swedish language in the live session *before* starting the installer, it works to get Swedish keyboard in the installed system. - This bug is reported from a system installed from Lubuntu Xenial alternate i386, but the corresponding desktop version is also affected. It is a rather new bug, that seems to have appeared at about the same time as the big problems with starting Ubiquity. Selecting another language in the installer looks the same in the alternate installer. But it looks different in the desktop installer. The locale is not pre-selected, you click on the world map, and you are asked if the selected keyboard is correct. The following window with alternative keyboards is empty. But that would be OK, if the installer would do, what it promises. After installation a lot of text is in the selected language, Swedish in my case, for example the pulldown menus in lxterminal. But when I type, the US English keyboard is still there. I have to run setxkbmap se to get Swedish keyboard. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubiquity (not installed) ProcVersionSignature: Ubuntu 4.4.0-7.22-generic 4.4.2 Uname: Linux 4.4.0-7-generic i686 ApportVersion: 2.20-0ubuntu3 Architecture: i386 CurrentDesktop: LXDE Date: Thu Feb 25 00:21:47 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2016-02-24 (0 days ago) InstallationMedia: Lubuntu 16.04 LTS "Xenial Xerus" - Alpha i386 (20160224) SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/casper/+bug/1549529/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1532355] Re: package linux-image-4.3.0-5-generic 4.3.0-5.16 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 2
Regarding UpgradeStatus: Upgraded to xenial on 2016-01-08 (0 days ago) The kernel team have decided that we have the linux LTS kernel 4.4 in our own 16.04 LTS. This makes perfect sense, my suggestion is to pull in the 'unstable' ppa from the kernel team and install the 4.4 kernel. (do not forget to un-install that ppa, else the kernel team will send you all sorts of "not tested" kernels :D ) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1532355 Title: package linux-image-4.3.0-5-generic 4.3.0-5.16 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 2 Status in initramfs-tools package in Ubuntu: Triaged Status in initramfs-tools source package in Xenial: Triaged Bug description: hung during the boot time , after many retries.. it came back to the login prompt ProblemType: Package DistroRelease: Ubuntu 16.04 Package: linux-image-4.3.0-5-generic 4.3.0-5.16 ProcVersionSignature: Ubuntu 4.3.0-5.16-generic 4.3.3 Uname: Linux 4.3.0-5-generic i686 ApportVersion: 2.19.3-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: sysadmin 2731 F pulseaudio /dev/snd/controlC1: sysadmin 2731 F pulseaudio Date: Thu Jan 7 23:24:23 2016 ErrorMessage: run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 2 HibernationDevice: RESUME=UUID=0aaeb789-574f-4293-b953-3f84f02fe743 InstallationDate: Installed on 2015-08-22 (139 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release i386 (20150422) Lsusb: Bus 003 Device 031: ID 04f3:0111 Elan Microelectronics Corp. Bus 003 Device 002: ID 8087:8000 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Latitude E7440 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-5-generic root=UUID=d3dfa265-52b0-4d9e-88c9-211a0272d159 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc 2.02~beta2-32ubuntu1 SourcePackage: initramfs-tools Title: package linux-image-4.3.0-5-generic 4.3.0-5.16 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 2 UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: Upgraded to xenial on 2016-01-08 (0 days ago) dmi.bios.date: 05/01/2014 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.asset.tag: 562268 dmi.board.name: 085VV3 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.asset.tag: 562268 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd05/01/2014:svnDellInc.:pnLatitudeE7440:pvr01:rvnDellInc.:rn085VV3:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E7440 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1532355/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1531824] Re: Xorg freeze
** Attachment added: "i915_error_state taken from the terminal during a freeze." https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531824/+attachment/4545516/+files/i915_error_state -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1531824 Title: Xorg freeze Status in xorg package in Ubuntu: New Bug description: Symptoms: * Video is frozen. Observations: * Mouse moves normally. * There is no hard-disc activity. * Once minute or so the video will respond like it's doing so a frame at a time. * Pressing CTRL+ALT+F6 and then waiting a minute or so puts you into a terminal. * Text terminals work normally without any problems. * Pressing ALT+F7 from a text terminal puts you into either black frozen screen or a frozen graphical display. * Restarting LightDM doesn't resolve the problem, it shows the login screen and freezes. When does it occur: * More often than not on or immediately after resume from suspend. * Occasionally, but not very often, during normal use. * It occurs several times a week, usually after several hours of suspend. It started a few months ago. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-57.77~14.04.1-generic 3.16.7-ckt20 Uname: Linux 3.16.0-57-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.19 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Thu Jan 7 11:29:40 2016 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.34, 3.16.0-56-generic, x86_64: installed virtualbox, 4.3.34, 3.16.0-57-generic, x86_64: installed ExtraDebuggingInterest: Yes GpuHangFrequency: Several times a week GpuHangReproducibility: Occurs more often under certain circumstances GpuHangStarted: Since a couple weeks or more GraphicsCard: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8276] Subsystem: ASUSTeK Computer Inc. Device [1043:8276] InstallationDate: Installed on 2015-07-13 (177 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) MachineType: System manufacturer V-P5G45 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-57-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/18/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0405 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: V-P5G45 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0405:bd05/18/2009:svnSystemmanufacturer:pnV-P5G45:pvrSystemVersion:rvnASUSTeKComputerINC.:rnV-P5G45:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: V-P5G45 dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Thu Jan 7 11:11:57 2016 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 41085 vendor DEL xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531824/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1531824] Re: Xorg freeze
** Attachment added: "Xorg.0.log taken from the terminal during a freeze." https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531824/+attachment/4545515/+files/Xorg.0.log -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1531824 Title: Xorg freeze Status in xorg package in Ubuntu: New Bug description: Symptoms: * Video is frozen. Observations: * Mouse moves normally. * There is no hard-disc activity. * Once minute or so the video will respond like it's doing so a frame at a time. * Pressing CTRL+ALT+F6 and then waiting a minute or so puts you into a terminal. * Text terminals work normally without any problems. * Pressing ALT+F7 from a text terminal puts you into either black frozen screen or a frozen graphical display. * Restarting LightDM doesn't resolve the problem, it shows the login screen and freezes. When does it occur: * More often than not on or immediately after resume from suspend. * Occasionally, but not very often, during normal use. * It occurs several times a week, usually after several hours of suspend. It started a few months ago. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-57.77~14.04.1-generic 3.16.7-ckt20 Uname: Linux 3.16.0-57-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.19 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Thu Jan 7 11:29:40 2016 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.34, 3.16.0-56-generic, x86_64: installed virtualbox, 4.3.34, 3.16.0-57-generic, x86_64: installed ExtraDebuggingInterest: Yes GpuHangFrequency: Several times a week GpuHangReproducibility: Occurs more often under certain circumstances GpuHangStarted: Since a couple weeks or more GraphicsCard: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8276] Subsystem: ASUSTeK Computer Inc. Device [1043:8276] InstallationDate: Installed on 2015-07-13 (177 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) MachineType: System manufacturer V-P5G45 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-57-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/18/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0405 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: V-P5G45 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0405:bd05/18/2009:svnSystemmanufacturer:pnV-P5G45:pvrSystemVersion:rvnASUSTeKComputerINC.:rnV-P5G45:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: V-P5G45 dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Thu Jan 7 11:11:57 2016 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 41085 vendor DEL xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531824/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1531824] [NEW] Xorg freeze
Public bug reported: Symptoms: * Video is frozen. Observations: * Mouse moves normally. * There is no hard-disc activity. * Once minute or so the video will respond like it's doing so a frame at a time. * Pressing CTRL+ALT+F6 and then waiting a minute or so puts you into a terminal. * Text terminals work normally without any problems. * Pressing ALT+F7 from a text terminal puts you into either black frozen screen or a frozen graphical display. * Restarting LightDM doesn't resolve the problem, it shows the login screen and freezes. When does it occur: * More often than not on or immediately after resume from suspend. * Occasionally, but not very often, during normal use. * It occurs several times a week, usually after several hours of suspend. It started a few months ago. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-57.77~14.04.1-generic 3.16.7-ckt20 Uname: Linux 3.16.0-57-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.19 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Thu Jan 7 11:29:40 2016 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.34, 3.16.0-56-generic, x86_64: installed virtualbox, 4.3.34, 3.16.0-57-generic, x86_64: installed ExtraDebuggingInterest: Yes GpuHangFrequency: Several times a week GpuHangReproducibility: Occurs more often under certain circumstances GpuHangStarted: Since a couple weeks or more GraphicsCard: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8276] Subsystem: ASUSTeK Computer Inc. Device [1043:8276] InstallationDate: Installed on 2015-07-13 (177 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) MachineType: System manufacturer V-P5G45 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-57-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/18/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0405 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: V-P5G45 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0405:bd05/18/2009:svnSystemmanufacturer:pnV-P5G45:pvrSystemVersion:rvnASUSTeKComputerINC.:rnV-P5G45:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: V-P5G45 dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Thu Jan 7 11:11:57 2016 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 41085 vendor DEL xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 freeze trusty ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1531824 Title: Xorg freeze Status in xorg package in Ubuntu: New Bug description: Symptoms: * Video is frozen. Observations: * Mouse moves normally. * There is no hard-disc activity. * Once minute or so the video will respond like it's doing so a frame at a time. * Pressing CTRL+ALT+F6 and then waiting a minute or so puts you into a terminal. * Text terminals work normally without any problems. * Pressing ALT+F7 from a text terminal puts you into either black frozen screen or a frozen graphical display. * Restarting LightDM doesn't resolve the problem, it shows the login screen and freezes. When does it occur: * More often than not on or immediately after resume from suspend. * Occasionally, but not very often, during normal use. * It
[Touch-packages] [Bug 1513448] [NEW] DB Update failed, database locked
Public bug reported: Every day at around 0630 GMT I get output from the daily cron job: ``` Crontest -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) ``` Reporting: ``` /etc/cron.daily/apt: DB Update failed, database locked ``` I have unattended-upgrades installed and set up if that is of any relevance. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: apt 1.0.1ubuntu2.8 ProcVersionSignature: Ubuntu 3.13.0-57.95-generic 3.13.11-ckt21 Uname: Linux 3.13.0-57-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 Date: Thu Nov 5 11:56:40 2015 InstallationDate: Installed on 2014-11-28 (341 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.3) SourcePackage: apt UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: apt (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1513448 Title: DB Update failed, database locked Status in apt package in Ubuntu: New Bug description: Every day at around 0630 GMT I get output from the daily cron job: ``` Cron test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) ``` Reporting: ``` /etc/cron.daily/apt: DB Update failed, database locked ``` I have unattended-upgrades installed and set up if that is of any relevance. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: apt 1.0.1ubuntu2.8 ProcVersionSignature: Ubuntu 3.13.0-57.95-generic 3.13.11-ckt21 Uname: Linux 3.13.0-57-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 Date: Thu Nov 5 11:56:40 2015 InstallationDate: Installed on 2014-11-28 (341 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.3) SourcePackage: apt UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1513448/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1341279] Re: Num Lock turned off when log-in page shown
I'm aware of the work configuration workaround detailed in your link but I think the lightdm should respect the BIOS settings and not require further configuration. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1341279 Title: Num Lock turned off when log-in page shown Status in lightdm package in Ubuntu: Incomplete Bug description: Whenever the log-in page shows, num lock is turned off. It's OK when unlocking, the state is preserved, it's just on start-up or after a log-out. To reproduce either turn on Num Lock then log-out, or set Num Lock on in the BIOS (as I do) and start the machine. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: lightdm 1.10.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-32.56-generic 3.13.11.4 Uname: Linux 3.13.0-32-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: Unity Date: Sun Jul 13 13:25:19 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-07 (431 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: lightdm UpgradeStatus: Upgraded to trusty on 2014-04-28 (76 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1341279/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1497742] [NEW] Clicks and noise over S/PDIF at 44100Hz
Public bug reported: Bus 002 Device 005: ID 0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device connected using S/PDIF optical out. Playing audio at 44100Hz has clicks and a quiet cyclical noise at roughly 5 cycles per second. The noise is like a really quiet shaker. Clicking seems random and of varying intensity. Affects multiple applications including Rhythmbox and Kodi. Even `aplay` using a raw CD file copied to disk. Higher playback rates of 48000Hz are clean and work fine with AC3 and DTS encoded pass-through. I tested this in Kodi where you can pick the playback rate with on-the-fly re-sampling. Same sound re-sampled and played at 48000Hz plays flawlessly, everything at 44100Hz has the problem. Previous sound card (integrated) is fine. HDMI output is also fine. Tried the `tsched=0` workaround, did not work. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11.1 ProcVersionSignature: Ubuntu 3.16.0-49.65~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-49-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.13 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: mediacentre 3018 F pulseaudio /dev/snd/controlC0: mediacentre 3018 F pulseaudio CurrentDesktop: Unity CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied Date: Sun Sep 20 15:10:57 2015 InstallationDate: Installed on 2015-07-02 (80 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/21/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1681IG6 VER.109 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: To be filled by O.E.M. dmi.board.vendor: Micro-Star International dmi.board.version: Ver.001 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 9 dmi.chassis.vendor: Micro-Star International dmi.chassis.version: Ver.001 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1681IG6VER.109:bd07/21/2010:svnMicro-StarInternational:pnCalpellaplatform:pvrVer.001:rvnMicro-StarInternational:rnTobefilledbyO.E.M.:rvrVer.001:cvnMicro-StarInternational:ct9:cvrVer.001: dmi.product.name: Calpella platform dmi.product.version: Ver.001 dmi.sys.vendor: Micro-Star International modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2015-09-20T15:04:55.963646 ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty ** Description changed: Bus 002 Device 005: ID 0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device connected using S/PDIF optical out. - Playing audio at 41000Hz has clicks and a quiet cyclical noise at + Playing audio at 44100Hz has clicks and a quiet cyclical noise at roughly 5 cycles per second. The noise is like a really quiet shaker. Clicking seems random and of varying intensity. Affects multiple applications including Rhythmbox and Kodi. Even `aplay` using a raw CD file copied to disk. Higher playback rates of 48000Hz are clean and work fine with AC3 and DTS encoded pass-through. I tested this in Kodi where you can pick the playback rate with on-the-fly re-sampling. Same sound re-sampled and - played at 48000Hz plays flawlessly, everything at 41000Hz has the + played at 48000Hz plays flawlessly, everything at 44100Hz has the problem. Previous sound card (integrated) is fine. HDMI output is also fine. Tried the `tsched=0` workaround, did not work. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11.1 ProcVersionSignature: Ubuntu 3.16.0-49.65~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-49-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.13 Architecture: amd64 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC1: mediacentre 3018 F pulseaudio - /dev/snd/controlC0: mediacentre 3018 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC1: mediacentre 3018 F pulseaudio + /dev/snd/controlC0: mediacentre 3018 F pulseaudio CurrentDesktop: Unity CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied Date: Sun Sep 20 15:10:57 2015 InstallationDate: Installed on 2015-07-02 (80 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/21/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1681IG6 VER.109 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: To be filled by O.E.M. dmi.board.vendor: Micro-Star International dmi.board.version:
[Touch-packages] [Bug 1495063] [NEW] Networking occasionally doesn't recover from suspend
Public bug reported: Occasionally, networking is disabled upon recovery from suspend. Clicking "Enable Networking" on the menu from the notification icon has no effect. It requires network-manager to be restarted with `service network-manager restart`. I can't identify a pattern to the problem. I can suspend the computer for minutes or hours without it happening. I've not noticed it on other computers running 14.04 that I have, so it's probably limited to my this particular hardware. I didn't notice it on previous versions of Ubuntu on this hardware. However, due to the nature of the problem it will not be practical to bisect the kernel as I don't have a reliable method of reproducing the fault as of yet. My network devices are as follows (I use the wireless one only): Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02) Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7.1 ProcVersionSignature: Ubuntu 3.16.0-48.64~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-48-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Sat Sep 12 12:44:30 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-07-13 (60 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) IpRoute: default via 192.168.1.1 dev wlan1 proto static 192.168.1.0/24 dev wlan1 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMPTIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH HTC Portable Hotspot DF99 b31b75bc-5b76-4592-9b4a-d9d860ea34aa 802-11-wireless 1441832180 Wed 09 Sep 2015 21:56:20 BST yes no /org/freedesktop/NetworkManager/Settings/1 TALKTALK-D069DC 700ea4cb-a660-479e-aa32-c00ad71e9064 802-11-wireless 1442058263 Sat 12 Sep 2015 12:44:23 BST yes no /org/freedesktop/NetworkManager/Settings/0 nmcli-dev: DEVICE TYPE STATE DBUS-PATH eth1 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/1 wlan1 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled enabled ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1495063 Title: Networking occasionally doesn't recover from suspend Status in network-manager package in Ubuntu: New Bug description: Occasionally, networking is disabled upon recovery from suspend. Clicking "Enable Networking" on the menu from the notification icon has no effect. It requires network-manager to be restarted with `service network-manager restart`. I can't identify a pattern to the problem. I can suspend the computer for minutes or hours without it happening. I've not noticed it on other computers running 14.04 that I have, so it's probably limited to my this particular hardware. I didn't notice it on previous versions of Ubuntu on this hardware. However, due to the nature of the problem it will not be practical to bisect the kernel as I don't have a reliable method of reproducing the fault as of yet. My network devices are as follows (I use the wireless one only): Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02) Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7.1 ProcVersionSignature: Ubuntu 3.16.0-48.64~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-48-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Sat Sep 12 12:44:30 2015 IfupdownConfig: # interfaces(5) file used by
[Touch-packages] [Bug 1489518] [NEW] Application windows opened in firefox, rather than being confined to the webapp container
Public bug reported: Using the Google Calendar launcher and Google Docs launcher as installed from Firefox. In calendar, if your session expires and you are asked to log back in, on clicking Sign Inthe calendar window is opened in firefox. If you sign out, the webapp window shows Please wait while the calendar you're trying to sign out of opens in firefox. Similar experience with Google Docs. When you open a document it opens in firefox, not the web application container. I would expect the web-app container to confine Google Calendar (or whatever domain you're in) to it's window, otherwise it defeats the whole point. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: webapp-container 0.23+14.04.20140428-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-46-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Thu Aug 27 16:06:40 2015 ExecutablePath: /usr/bin/webapp-container InstallationDate: Installed on 2015-07-13 (44 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: webbrowser-app UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: webbrowser-app (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1489518 Title: Application windows opened in firefox, rather than being confined to the webapp container Status in webbrowser-app package in Ubuntu: New Bug description: Using the Google Calendar launcher and Google Docs launcher as installed from Firefox. In calendar, if your session expires and you are asked to log back in, on clicking Sign Inthe calendar window is opened in firefox. If you sign out, the webapp window shows Please wait while the calendar you're trying to sign out of opens in firefox. Similar experience with Google Docs. When you open a document it opens in firefox, not the web application container. I would expect the web-app container to confine Google Calendar (or whatever domain you're in) to it's window, otherwise it defeats the whole point. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: webapp-container 0.23+14.04.20140428-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15 Uname: Linux 3.16.0-46-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.12 Architecture: amd64 CurrentDesktop: Unity Date: Thu Aug 27 16:06:40 2015 ExecutablePath: /usr/bin/webapp-container InstallationDate: Installed on 2015-07-13 (44 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: webbrowser-app UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1489518/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1419944] [NEW] all information / editing for n-m vanishes at latest update
Public bug reported: I'm running 15.04 Lubuntu. The install and Live CD work fine, but when applying the latest updates there is simply a greyed out 'No network devices are available' (I'm typing this using WiFi on the machine it says has no network devices), or VPN Connections. Screen shot is at http://imgur.com/l9iQZ1A ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.16-0ubuntu1 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Feb 9 19:17:01 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-02-06 (2 days ago) InstallationMedia: Lubuntu 15.04 Vivid Vervet - Alpha amd64 (20141113) IpRoute: default via 192.168.1.1 dev wlan0 proto static 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH nmcli-dev: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1419944 Title: all information / editing for n-m vanishes at latest update Status in network-manager package in Ubuntu: New Bug description: I'm running 15.04 Lubuntu. The install and Live CD work fine, but when applying the latest updates there is simply a greyed out 'No network devices are available' (I'm typing this using WiFi on the machine it says has no network devices), or VPN Connections. Screen shot is at http://imgur.com/l9iQZ1A ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.16-0ubuntu1 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Feb 9 19:17:01 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-02-06 (2 days ago) InstallationMedia: Lubuntu 15.04 Vivid Vervet - Alpha amd64 (20141113) IpRoute: default via 192.168.1.1 dev wlan0 proto static 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH nmcli-dev: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1419944/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1419944] Re: all information / editing for n-m vanishes at latest update
Have just installed Setting up network-manager (0.9.10.0-4ubuntu6) ... Now to reboot. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1419944 Title: all information / editing for n-m vanishes at latest update Status in network-manager package in Ubuntu: New Bug description: I'm running 15.04 Lubuntu. The install and Live CD work fine, but when applying the latest updates there is simply a greyed out 'No network devices are available' (I'm typing this using WiFi on the machine it says has no network devices), or VPN Connections. Screen shot is at http://imgur.com/l9iQZ1A ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.16-0ubuntu1 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Feb 9 19:17:01 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-02-06 (2 days ago) InstallationMedia: Lubuntu 15.04 Vivid Vervet - Alpha amd64 (20141113) IpRoute: default via 192.168.1.1 dev wlan0 proto static 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH nmcli-dev: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1419944/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1419944] Re: all information / editing for n-m vanishes at latest update
Have just installed Setting up network-manager (0.9.10.0-4ubuntu6) ... Now to reboot. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1419944 Title: all information / editing for n-m vanishes at latest update Status in network-manager package in Ubuntu: Fix Released Bug description: I'm running 15.04 Lubuntu. The install and Live CD work fine, but when applying the latest updates there is simply a greyed out 'No network devices are available' (I'm typing this using WiFi on the machine it says has no network devices), or VPN Connections. Screen shot is at http://imgur.com/l9iQZ1A ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.16-0ubuntu1 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Feb 9 19:17:01 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-02-06 (2 days ago) InstallationMedia: Lubuntu 15.04 Vivid Vervet - Alpha amd64 (20141113) IpRoute: default via 192.168.1.1 dev wlan0 proto static 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH nmcli-dev: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1419944/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1419944] Re: all information / editing for n-m vanishes at latest update
0.9.10.0-4ubuntu6 fixes this issue. ** Changed in: network-manager (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1419944 Title: all information / editing for n-m vanishes at latest update Status in network-manager package in Ubuntu: Fix Released Bug description: I'm running 15.04 Lubuntu. The install and Live CD work fine, but when applying the latest updates there is simply a greyed out 'No network devices are available' (I'm typing this using WiFi on the machine it says has no network devices), or VPN Connections. Screen shot is at http://imgur.com/l9iQZ1A ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.16-0ubuntu1 Architecture: amd64 CurrentDesktop: LXDE Date: Mon Feb 9 19:17:01 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-02-06 (2 days ago) InstallationMedia: Lubuntu 15.04 Vivid Vervet - Alpha amd64 (20141113) IpRoute: default via 192.168.1.1 dev wlan0 proto static 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH nmcli-dev: Warning: nmcli (0.9.10.0) and NetworkManager (0.9.8.8) versions don't match. Use --nocheck to suppress the warning. DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1419944/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 835532] Re: lightdm does not keep numlock status on boot
** Tags added: trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/835532 Title: lightdm does not keep numlock status on boot Status in LightDM GTK+ Greeter: Triaged Status in “lightdm” package in Ubuntu: Triaged Status in “lightdm” source package in Oneiric: Won't Fix Bug description: when booting or logging out, the numlock status 'on' is not kept for password or pin input via numpad. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: lightdm 0.9.3-0ubuntu8 ProcVersionSignature: Ubuntu 3.0.0-9.14-generic 3.0.3 Uname: Linux 3.0.0-9-generic x86_64 Architecture: amd64 Date: Sat Aug 27 12:22:27 2011 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1) SourcePackage: lightdm UpgradeStatus: Upgraded to oneiric on 2011-08-27 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/lightdm-gtk-greeter/+bug/835532/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1267679] Re: Copy dialog disappears, no way to bring it back.
Apparently same issue in 14.04, let me know what details you need and how to get them. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/1267679 Title: Copy dialog disappears, no way to bring it back. Status in Unity: Confirmed Status in “unity” package in Ubuntu: Confirmed Bug description: I was just copying many files to and from server at once, then copied over some files over that required merge, and clicking replace, replace... replace-all. Then I noticed that there was no longer any transfer window - not with Alt-tab and looking at all the Nautilus filebrowser windows, and not with Super+W windows overview. It had completely disappeared, however, the status-bar in the Unity panel to the left showed its status bar going on and eventually finishing. I try Super+W, Show copy dialog from rightclick, alt-tab, nothing will show the copy dialog, though copying works. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: nautilus 1:3.8.2-0ubuntu2.1 ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Thu Jan 9 14:52:19 2014 EcryptfsInUse: Yes GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b'851x737+599+170' InstallationDate: Installed on 2013-11-23 (47 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MarkForUpload: True SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1267679/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1380774] Re: debian-installer does not find kernel
Brian, if wxl (release manager lubuntu) requests a respin of the alternate ISO's will it pick up the new apt? Regards, Phill. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1380774 Title: debian-installer does not find kernel Status in APT: Fix Released Status in “apt” package in Ubuntu: Triaged Status in “apt” source package in Utopic: Triaged Bug description: HOW TO REPRODUCE 1. From http://cdimage.ubuntu.com/ubuntu-desktop-next/daily-live/current/, boot any Lubuntu Alternate or Ubuntu Server image. 2. Follow http://iso.qa.ubuntu.com/qatracker/testcases/1437/info test-case. EXPECTED BEHAVIOUR The installation to finish successfully. REAL BEHAVIOUR The installer can't find a kernel to install, as seen in the attached screen-shot. DistroRelease: Ubuntu 14.10 Package: apt Architecture: i386, amd64, amd64+mac, ppc To manage notifications about this bug go to: https://bugs.launchpad.net/apt/+bug/1380774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1380774] Re: debian-installer does not find kernel
confirm on http://iso.qa.ubuntu.com/qatracker/milestones/325/builds/82097/testcases Well done guys and gals. A late show-stopper resolved :) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1380774 Title: debian-installer does not find kernel Status in APT: Fix Released Status in “apt” package in Ubuntu: Fix Released Status in “apt” source package in Utopic: Fix Released Bug description: HOW TO REPRODUCE 1. From http://cdimage.ubuntu.com/ubuntu-desktop-next/daily-live/current/, boot any Lubuntu Alternate or Ubuntu Server image. 2. Follow http://iso.qa.ubuntu.com/qatracker/testcases/1437/info test-case. EXPECTED BEHAVIOUR The installation to finish successfully. REAL BEHAVIOUR The installer can't find a kernel to install, as seen in the attached screen-shot. DistroRelease: Ubuntu 14.10 Package: apt Architecture: i386, amd64, amd64+mac, ppc To manage notifications about this bug go to: https://bugs.launchpad.net/apt/+bug/1380774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1378423] Re: Virtualbox boots to black screen with daily
VirtualBox 4.3.18 r96516 running on Lubuntu Utopic can install and run Lubuntu Desktop amd64 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1378423 Title: Virtualbox boots to black screen with daily Status in “xorg” package in Ubuntu: Confirmed Bug description: Boot the daily image. Get a black screen. Go to tty1 - lightdm has started - running sudo service lightdm status echoes start/waiting Return to tty7 and the login dialogue has now appeared ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xorg 1:7.7+7ubuntu2 ProcVersionSignature: Ubuntu 3.16.0-20.27-generic 3.16.3 Uname: Linux 3.16.0-20-generic x86_64 ApportVersion: 2.14.7-0ubuntu3 Architecture: amd64 CasperVersion: 1.344 Date: Tue Oct 7 15:53:54 2014 LiveMediaBuild: Xubuntu 14.10 Utopic Unicorn - Alpha amd64 (20141006) ProcEnviron: SHELL=/bin/bash TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 XDG_RUNTIME_DIR=set SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1378423/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1380774] Re: debian-installer does not find kernel
Fixed upstream https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=765458 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1380774 Title: debian-installer does not find kernel Status in APT: Unknown Status in “apt” package in Ubuntu: Confirmed Status in “apt” source package in Utopic: Confirmed Bug description: To reproduce boot the daily live utopic-alternate-i386 daily from 10-13. Then continue through testcase 1437 to install to the entire disk it will create paritions, write to disk, and then try to load kernel and say it failed to load the kernel. Ubuntu 14.10 utopic unicorn i386 the version of debian installer is debian-installer (20101020ubuntu348) I expected this to install a kernel and boot instead the installation could not find a kernel. To manage notifications about this bug go to: https://bugs.launchpad.net/apt/+bug/1380774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1380774] Re: debian-installer does not find kernel
How long until incorporation and the server edition and lubuntu alternates being re-spun? Regards, Phill. On 17 October 2014 02:03, Bug Watch Updater 1380...@bugs.launchpad.net wrote: ** Changed in: apt Status: Unknown = Fix Released -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1380774 Title: debian-installer does not find kernel Status in APT: Fix Released Status in apt package in Ubuntu: Triaged Status in apt source package in Utopic: Triaged Bug description: HOW TO REPRODUCE 1. From http://cdimage.ubuntu.com/ubuntu-desktop-next/daily-live/current/, boot any Lubuntu Alternate or Ubuntu Server image. 2. Follow http://iso.qa.ubuntu.com/qatracker/testcases/1437/info test-case. EXPECTED BEHAVIOUR The installation to finish successfully. REAL BEHAVIOUR The installer can't find a kernel to install, as seen in the attached screen-shot. DistroRelease: Ubuntu 14.10 Package: apt Architecture: i386, amd64, amd64+mac, ppc To manage notifications about this bug go to: https://bugs.launchpad.net/apt/+bug/1380774/+subscriptions -- https://wiki.ubuntu.com/phillw -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1380774 Title: debian-installer does not find kernel Status in APT: Fix Released Status in “apt” package in Ubuntu: Triaged Status in “apt” source package in Utopic: Triaged Bug description: HOW TO REPRODUCE 1. From http://cdimage.ubuntu.com/ubuntu-desktop-next/daily-live/current/, boot any Lubuntu Alternate or Ubuntu Server image. 2. Follow http://iso.qa.ubuntu.com/qatracker/testcases/1437/info test-case. EXPECTED BEHAVIOUR The installation to finish successfully. REAL BEHAVIOUR The installer can't find a kernel to install, as seen in the attached screen-shot. DistroRelease: Ubuntu 14.10 Package: apt Architecture: i386, amd64, amd64+mac, ppc To manage notifications about this bug go to: https://bugs.launchpad.net/apt/+bug/1380774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp