[Touch-packages] [Bug 1642966] Re: package cups-daemon 2.1.3-4 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1
Same here, apport incorrectly complained that /etc/default/cups was modified. I never touched that one. The content is: # Cups configure options # LOAD_LP_MODULE: enable/disable to load "lp" parallel printer driver module # LOAD_LP_MODULE has migrated to /etc/modules-load.d/cups-filters.conf # LOAD_LP_MODULE=yes -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1642966 Title: package cups-daemon 2.1.3-4 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1 Status in cups package in Ubuntu: Confirmed Bug description: This is in xenial-proposed, please block release to -updates accordingly :) ProblemType: Package DistroRelease: Ubuntu 16.04 Package: cups-daemon 2.1.3-4 ProcVersionSignature: Ubuntu 4.4.0-46.67-generic 4.4.24 Uname: Linux 4.4.0-46-generic x86_64 NonfreeKernelModules: zfs zunicode zcommon znvpair zavl ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CupsErrorLog: Date: Fri Nov 18 11:13:15 2016 ErrorMessage: subprocess new pre-removal script returned error exit status 1 InstallationDate: Installed on 2016-05-02 (200 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) Lpstat: device for mallards-officejet-pro-8600: dnssd://Officejet%20Pro%208600%20%5BD63461%5D._ipp._tcp.local/?uuid=1c852a4d-b800-1f08-abcd-d89d67d63461 MachineType: Dell Inc. XPS 15 9550 Papersize: a4 PpdFiles: mallards-officejet-pro-8600: HP Officejet Pro 8600, hpcups 3.16.3 ProcCmdline: BOOT_IMAGE=/boot/vmlinuz-4.4.0-46-generic.efi.signed root=UUID=3643ef37-7cee-41b3-9387-2faa819c44db ro quiet splash vt.handoff=7 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-46-generic.efi.signed root=UUID=3643ef37-7cee-41b3-9387-2faa819c44db ro quiet splash vt.handoff=7 RelatedPackageVersions: dpkg 1.18.4ubuntu1.1 apt 1.2.15 SourcePackage: cups Title: package cups-daemon 2.1.3-4 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/07/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: 01.02.00 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr01.02.00:bd04/07/2016:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: XPS 15 9550 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1642966/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1642966] Re: package cups-daemon 2.1.3-4 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1
Same problem here: Preparing to unpack .../cups-daemon_2.1.3-4ubuntu0.1_amd64.deb ... Job for cups.service canceled. invoke-rc.d: initscript cups, action "stop" failed. dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg: trying script from the new package instead ... Job for cups.service canceled. invoke-rc.d: initscript cups, action "stop" failed. dpkg: error processing archive /var/cache/apt/archives/cups-daemon_2.1.3-4ubuntu0.1_amd64.deb (--unpack): subprocess new pre-removal script returned error exit status 1 […] Errors were encountered while processing: /var/cache/apt/archives/cups-daemon_2.1.3-4ubuntu0.1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Failed to perform requested operation on package. Trying to recover: […] After trying the upgrade a second time, it worked: Unpacking cups-daemon (2.1.3-4ubuntu0.1) over (2.1.3-4) ... Preparing to unpack .../libisc-export160_1%3a9.10.3.dfsg.P4-8ubuntu1.3_amd64.deb ... […] Setting up cups-daemon (2.1.3-4ubuntu0.1) ... Setting up cups-core-drivers (2.1.3-4ubuntu0.1) ... Setting up cups (2.1.3-4ubuntu0.1) ... Updating PPD files for cups ... But /var/log/cups/error_log is empty. ** Changed in: cups (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1642966 Title: package cups-daemon 2.1.3-4 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1 Status in cups package in Ubuntu: Confirmed Bug description: This is in xenial-proposed, please block release to -updates accordingly :) ProblemType: Package DistroRelease: Ubuntu 16.04 Package: cups-daemon 2.1.3-4 ProcVersionSignature: Ubuntu 4.4.0-46.67-generic 4.4.24 Uname: Linux 4.4.0-46-generic x86_64 NonfreeKernelModules: zfs zunicode zcommon znvpair zavl ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CupsErrorLog: Date: Fri Nov 18 11:13:15 2016 ErrorMessage: subprocess new pre-removal script returned error exit status 1 InstallationDate: Installed on 2016-05-02 (200 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) Lpstat: device for mallards-officejet-pro-8600: dnssd://Officejet%20Pro%208600%20%5BD63461%5D._ipp._tcp.local/?uuid=1c852a4d-b800-1f08-abcd-d89d67d63461 MachineType: Dell Inc. XPS 15 9550 Papersize: a4 PpdFiles: mallards-officejet-pro-8600: HP Officejet Pro 8600, hpcups 3.16.3 ProcCmdline: BOOT_IMAGE=/boot/vmlinuz-4.4.0-46-generic.efi.signed root=UUID=3643ef37-7cee-41b3-9387-2faa819c44db ro quiet splash vt.handoff=7 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-46-generic.efi.signed root=UUID=3643ef37-7cee-41b3-9387-2faa819c44db ro quiet splash vt.handoff=7 RelatedPackageVersions: dpkg 1.18.4ubuntu1.1 apt 1.2.15 SourcePackage: cups Title: package cups-daemon 2.1.3-4 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/07/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: 01.02.00 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr01.02.00:bd04/07/2016:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: XPS 15 9550 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1642966/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1422143] Re: No wifi connection after suspend with systemd due to missing "wpa_cli suspend"
@makuser: Please open a new bug referring to this bug and add a comment with the new bug number here. Thanks. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to wpa in Ubuntu. https://bugs.launchpad.net/bugs/1422143 Title: No wifi connection after suspend with systemd due to missing "wpa_cli suspend" Status in One Hundred Papercuts: Fix Released Status in NetworkManager: Unknown Status in wpa package in Ubuntu: Fix Released Status in wpa source package in Wily: Fix Committed Status in wpa source package in Xenial: Fix Released Bug description: Using systemd as my default init system if I resume from suspend my laptop, it doesn't automatically reconnect to the wireless network and it doesn't list the available network connections. The only way to get a wireless connection is to restart the network- manager daemon or going to the gnome-control-center, disable wireless and enable it again. SRU INFORMATION === In some of these cases this bug can be worked around by calling "wpa_cli suspend/resume" before/after suspend, like we used to do with the old pm-utils quirks (/usr/lib/pm-utils/sleep.d/60_wpa_supplicant). This only affects particular hardware, and thus this needs to be tested by affected reporters, there is no general reproducer for arbitrary systems. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu6 Uname: Linux 3.19.0-031900-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.16.1-0ubuntu2 Architecture: amd64 Date: Sun Feb 15 18:27:39 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2014-10-22 (116 days ago) InstallationMedia: Ubuntu-GNOME 14.10 "Utopic Unicorn" - Alpha amd64 (20140923) IpRoute: default via 10.0.0.1 dev wlan0 proto static metric 1024 10.0.0.0/24 dev wlan0 proto kernel scope link src 10.0.0.36 169.254.0.0/16 dev wlan0 scope link metric 1000 SourcePackage: network-manager UpgradeStatus: Upgraded to vivid on 2015-01-13 (32 days ago) nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlan0wifi connected/org/freedesktop/NetworkManager/Devices/2 openhost_caldas 09d1f69d-d3da-4978-a69c-d94455db7ecf /org/freedesktop/NetworkManager/ActiveConnection/0 docker0 bridgeunavailable /org/freedesktop/NetworkManager/Devices/3 -- ---- eth0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1422143/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1422143] Re: No wifi connection after suspend with systemd due to missing "wpa_cli suspend"
Martin Pitt committed some fix in October 2015, but apparently that did not solve this bug, or only partly. What's the correct way to handle this? Reopen this bug or open a new one referring to this one? This still happens for me, too (Ubuntu 16.04), and the workaround from #50 fixes it. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to wpa in Ubuntu. https://bugs.launchpad.net/bugs/1422143 Title: No wifi connection after suspend with systemd due to missing "wpa_cli suspend" Status in One Hundred Papercuts: Fix Released Status in NetworkManager: Unknown Status in wpa package in Ubuntu: Fix Released Status in wpa source package in Wily: Fix Committed Status in wpa source package in Xenial: Fix Released Bug description: Using systemd as my default init system if I resume from suspend my laptop, it doesn't automatically reconnect to the wireless network and it doesn't list the available network connections. The only way to get a wireless connection is to restart the network- manager daemon or going to the gnome-control-center, disable wireless and enable it again. SRU INFORMATION === In some of these cases this bug can be worked around by calling "wpa_cli suspend/resume" before/after suspend, like we used to do with the old pm-utils quirks (/usr/lib/pm-utils/sleep.d/60_wpa_supplicant). This only affects particular hardware, and thus this needs to be tested by affected reporters, there is no general reproducer for arbitrary systems. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu6 Uname: Linux 3.19.0-031900-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.16.1-0ubuntu2 Architecture: amd64 Date: Sun Feb 15 18:27:39 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2014-10-22 (116 days ago) InstallationMedia: Ubuntu-GNOME 14.10 "Utopic Unicorn" - Alpha amd64 (20140923) IpRoute: default via 10.0.0.1 dev wlan0 proto static metric 1024 10.0.0.0/24 dev wlan0 proto kernel scope link src 10.0.0.36 169.254.0.0/16 dev wlan0 scope link metric 1000 SourcePackage: network-manager UpgradeStatus: Upgraded to vivid on 2015-01-13 (32 days ago) nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlan0wifi connected/org/freedesktop/NetworkManager/Devices/2 openhost_caldas 09d1f69d-d3da-4978-a69c-d94455db7ecf /org/freedesktop/NetworkManager/ActiveConnection/0 docker0 bridgeunavailable /org/freedesktop/NetworkManager/Devices/3 -- ---- eth0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1422143/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1422143] Re: No wifi connection after suspend with systemd
** Changed in: network-manager (Ubuntu) Status: Incomplete => Confirmed ** Tags added: systemd-boot -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1422143 Title: No wifi connection after suspend with systemd Status in One Hundred Papercuts: Confirmed Status in NetworkManager: Unknown Status in network-manager package in Ubuntu: Confirmed Bug description: Using systemd as my default init system if I resume from suspend my laptop, it doesn't automatically reconnect to the wireless network and it doesn't list the available network connections. The only way to get a wireless connection is to restart the network- manager daemon or going to the gnome-control-center, disable wireless and enable it again. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu6 Uname: Linux 3.19.0-031900-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.16.1-0ubuntu2 Architecture: amd64 Date: Sun Feb 15 18:27:39 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2014-10-22 (116 days ago) InstallationMedia: Ubuntu-GNOME 14.10 "Utopic Unicorn" - Alpha amd64 (20140923) IpRoute: default via 10.0.0.1 dev wlan0 proto static metric 1024 10.0.0.0/24 dev wlan0 proto kernel scope link src 10.0.0.36 169.254.0.0/16 dev wlan0 scope link metric 1000 SourcePackage: network-manager UpgradeStatus: Upgraded to vivid on 2015-01-13 (32 days ago) nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlan0wifi connected/org/freedesktop/NetworkManager/Devices/2 openhost_caldas 09d1f69d-d3da-4978-a69c-d94455db7ecf /org/freedesktop/NetworkManager/ActiveConnection/0 docker0 bridgeunavailable /org/freedesktop/NetworkManager/Devices/3 -- ---- eth0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1422143/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1431582] Re: there is no wi-fi after hybernate mode
*** This bug is a duplicate of bug 1422143 *** https://bugs.launchpad.net/bugs/1422143 ** This bug has been marked a duplicate of bug 1422143 No wifi connection after suspend with systemd -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1431582 Title: there is no wi-fi after hybernate mode Status in network-manager package in Ubuntu: Confirmed Bug description: During last three days: after hybernate mode there is no wi-fi. I have to turn off Network-manager and turn it on again- only after that wi-fi works again !!! If you choose upstart-boot option there is no problem with wifi after hybernayion ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu10 ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1 Uname: Linux 3.19.0-9-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Fri Mar 13 00:56:10 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-10-18 (510 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) IpRoute: default via 10.0.1.1 dev wlan0 proto static metric 1024 10.0.1.0/24 dev wlan0 proto kernel scope link src 10.0.1.18 169.254.0.0/16 dev wlan0 scope link metric 1000 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH k3b 66a32a2c-3eac-46e3-a111-0c63e94bd135 802-11-wireless 1426197268 Пт. 13 марта 2015 00:54:28 yes no /org/freedesktop/NetworkManager/Settings/0 yes wlan0 activated /org/freedesktop/NetworkManager/ActiveConnection/0 nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH wlan0 wifi connected /org/freedesktop/NetworkManager/Devices/1 k3b 66a32a2c-3eac-46e3-a111-0c63e94bd135 /org/freedesktop/NetworkManager/ActiveConnection/0 lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1431582/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1422143] Re: No wifi connection after suspend with systemd
Problem still exists in Wily. Reconnect after resume works after switching to upstart as suggested, but there is still no Wifi connection after turning Wifi off in the panel menu and back on later. ** This bug is no longer a duplicate of bug 1270257 NetworkManager failed to function after suspend and resume -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1422143 Title: No wifi connection after suspend with systemd Status in One Hundred Papercuts: Confirmed Status in NetworkManager: Unknown Status in network-manager package in Ubuntu: Incomplete Bug description: Using systemd as my default init system if I resume from suspend my laptop, it doesn't automatically reconnect to the wireless network and it doesn't list the available network connections. The only way to get a wireless connection is to restart the network- manager daemon or going to the gnome-control-center, disable wireless and enable it again. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu6 Uname: Linux 3.19.0-031900-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.16.1-0ubuntu2 Architecture: amd64 Date: Sun Feb 15 18:27:39 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2014-10-22 (116 days ago) InstallationMedia: Ubuntu-GNOME 14.10 "Utopic Unicorn" - Alpha amd64 (20140923) IpRoute: default via 10.0.0.1 dev wlan0 proto static metric 1024 10.0.0.0/24 dev wlan0 proto kernel scope link src 10.0.0.36 169.254.0.0/16 dev wlan0 scope link metric 1000 SourcePackage: network-manager UpgradeStatus: Upgraded to vivid on 2015-01-13 (32 days ago) nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlan0wifi connected/org/freedesktop/NetworkManager/Devices/2 openhost_caldas 09d1f69d-d3da-4978-a69c-d94455db7ecf /org/freedesktop/NetworkManager/ActiveConnection/0 docker0 bridgeunavailable /org/freedesktop/NetworkManager/Devices/3 -- ---- eth0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- ---- lo loopback unmanaged/org/freedesktop/NetworkManager/Devices/0 -- ---- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1422143/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1492850] Re: Dell pro venue 11 - No wireless connections after sleep
*** This bug is a duplicate of bug 1422143 *** https://bugs.launchpad.net/bugs/1422143 ** This bug is no longer a duplicate of bug 1431582 there is no wi-fi after hybernate mode ** This bug has been marked a duplicate of bug 1422143 No wifi connection after suspend with systemd -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1492850 Title: Dell pro venue 11 - No wireless connections after sleep Status in linux package in Ubuntu: Confirmed Status in systemd package in Ubuntu: New Bug description: I try for a long time to set-up the wifi for my dell pro venue 11 v7130 (wifi chipset Intel Corporation Wireless 7260). The wifi connection is perfect until the computer is suspend. After a suspend, even activating the wifi from network manager is impossible. After suspend even an exit doesn't reconnect to the wifi connection. It seems that the wifi chipset is off and it's impossible to wake up. Recently 15.04 has been update to 4.2 RC8. Nothing new ! A file unload_modules has been created. /etc/pm/config.d with SUSPEND_MODULES="$SUSPEND_MODULES iwlwifi" without any effect. sudo service network-manager restart doesn't work too ! Before suspend @utopie:~$ sudo lshw -C network *-network description: Interface réseau sans fil produit: Wireless 7260 fabriquant: Intel Corporation identifiant matériel: 0 information bus: pci@:01:00.0 nom logique: wlan0 version: 83 numéro de série: 5c:51:4f:d9:2e:75 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=4.2.0-040200rc8-generic firmware=25.30.13.0 ip=192.168.0.50 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn ressources: irq:49 mémoire:f7d0-f7d01fff *-network DÉSACTIVÉ description: Ethernet interface identifiant matériel: 1 nom logique: wwan0 numéro de série: 1e:51:e0:b8:e1:da fonctionnalités: ethernet physical configuration: broadcast=yes driver=cdc_mbim driverversion=22-Aug-2005 firmware=CDC MBIM link=no multicast=yes After suspend (no more wifi chipset !). @utopie:~$ sudo lshw -C network *-network DÉSACTIVÉ description: Ethernet interface identifiant matériel: 1 nom logique: wwan0 numéro de série: 1e:51:e0:b8:e1:da fonctionnalités: ethernet physical configuration: broadcast=yes driver=cdc_mbim driverversion=22-Aug-2005 firmware=CDC MBIM link=no multicast=yes --- ApportVersion: 2.17.2-0ubuntu1.4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: baly 1169 F pulseaudio /dev/snd/controlC1: baly 1169 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 15.04 HibernationDevice: RESUME=UUID=729324f1-42a5-45f8-9585-f6e0169f2d64 InstallationDate: Installed on 2015-04-23 (144 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: Dell Inc. Venue 11 Pro 7130 vPro Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-29-generic.efi.signed root=UUID=35cde4a5-bbc3-442b-b239-d3f917925a94 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-29.31-generic 3.19.8-ckt6 RelatedPackageVersions: linux-restricted-modules-3.19.0-29-generic N/A linux-backports-modules-3.19.0-29-generic N/A linux-firmware 1.143.3 Tags: vivid UdevLog: Error: [Errno 2] Aucun fichier ou dossier de ce type: '/var/log/udev' Uname: Linux 3.19.0-29-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/18/2014 dmi.bios.vendor: Dell Inc. dmi.bios.version: A10 dmi.board.name: 0T69G0 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA10:bd02/18/2014:svnDellInc.:pnVenue11Pro7130vPro:pvr01:rvnDellInc.:rn0T69G0:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Venue 11 Pro 7130 vPro dmi.product.version: 01 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1492850/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1499896] Re: package modemmanager 1.4.10-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 100
This also occurred on a Lenovo Edge E130 and an Acer Aspire V. Simply running «sudo dpkg --configure -a» fixed it for me, but update- manager still didn't finish properly. I had to clean up the packages and reboot by hand. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to modemmanager in Ubuntu. https://bugs.launchpad.net/bugs/1499896 Title: package modemmanager 1.4.10-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 100 Status in modemmanager package in Ubuntu: Confirmed Bug description: Ran update-manager -d ProblemType: Package DistroRelease: Ubuntu 15.10 Package: modemmanager 1.4.10-1ubuntu1 ProcVersionSignature: Ubuntu 4.2.0-11.13-generic 4.2.1 Uname: Linux 4.2.0-11-generic x86_64 ApportVersion: 2.19-0ubuntu1 Architecture: amd64 Date: Fri Sep 25 13:52:52 2015 DuplicateSignature: package:modemmanager:1.4.10-1ubuntu1:subprocess installed post-installation script returned error exit status 100 ErrorMessage: subprocess installed post-installation script returned error exit status 100 InstallationDate: Installed on 2012-04-02 (1271 days ago) InstallationMedia: Xubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120328) RelatedPackageVersions: dpkg 1.18.2ubuntu4 apt 1.0.9.10ubuntu7 SourcePackage: modemmanager Title: package modemmanager 1.4.10-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 100 UpgradeStatus: Upgraded to wily on 2015-09-25 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/modemmanager/+bug/1499896/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1453880] Re: package modemmanager 1.4.0-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 100
*** This bug is a duplicate of bug 1481798 *** https://bugs.launchpad.net/bugs/1481798 ** This bug has been marked a duplicate of bug 1481798 package:modemmanager:1.4.10-1:subprocess installed post-installation script returned error exit status 100 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to modemmanager in Ubuntu. https://bugs.launchpad.net/bugs/1453880 Title: package modemmanager 1.4.0-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 100 Status in modemmanager package in Ubuntu: Confirmed Bug description: package modemmanager 1.4.0-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 100 ProblemType: Package DistroRelease: Ubuntu 15.04 Package: modemmanager Uname: Linux 3.18.4-031804-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 Date: Mon May 11 13:43:30 2015 DuplicateSignature: package:modemmanager:1.4.0-1:subprocess installed post-installation script returned error exit status 100 ErrorMessage: subprocess installed post-installation script returned error exit status 100 InstallationDate: Installed on 2015-05-04 (7 days ago) InstallationMedia: Ubuntu 10.04.4 LTS "Lucid Lynx" - Release amd64 (20120214.2) RelatedPackageVersions: dpkg 1.17.25ubuntu1 apt 1.0.9.7ubuntu4 SourcePackage: modemmanager Title: package modemmanager 1.4.0-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 100 UpgradeStatus: Upgraded to vivid on 2015-05-11 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/modemmanager/+bug/1453880/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1499896] Re: package modemmanager 1.4.10-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 100
*** This bug is a duplicate of bug 1481798 *** https://bugs.launchpad.net/bugs/1481798 ** This bug has been marked a duplicate of bug 1481798 package:modemmanager:1.4.10-1:subprocess installed post-installation script returned error exit status 100 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to modemmanager in Ubuntu. https://bugs.launchpad.net/bugs/1499896 Title: package modemmanager 1.4.10-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 100 Status in modemmanager package in Ubuntu: Confirmed Bug description: Ran update-manager -d ProblemType: Package DistroRelease: Ubuntu 15.10 Package: modemmanager 1.4.10-1ubuntu1 ProcVersionSignature: Ubuntu 4.2.0-11.13-generic 4.2.1 Uname: Linux 4.2.0-11-generic x86_64 ApportVersion: 2.19-0ubuntu1 Architecture: amd64 Date: Fri Sep 25 13:52:52 2015 DuplicateSignature: package:modemmanager:1.4.10-1ubuntu1:subprocess installed post-installation script returned error exit status 100 ErrorMessage: subprocess installed post-installation script returned error exit status 100 InstallationDate: Installed on 2012-04-02 (1271 days ago) InstallationMedia: Xubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120328) RelatedPackageVersions: dpkg 1.18.2ubuntu4 apt 1.0.9.10ubuntu7 SourcePackage: modemmanager Title: package modemmanager 1.4.10-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 100 UpgradeStatus: Upgraded to wily on 2015-09-25 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/modemmanager/+bug/1499896/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1270257] Re: NetworkManager failed to function after suspend and resume
Reconnecting wifi worked fine here until the system upgrade to 15.04 (vivid). Since then, after suspend and resume wifi does not work almost always. No wifi networks are shown in the network manager menu then, and I have to either switch networking completely off and on again, or select “connect to hidden nework…” and choose the desired SSID there. This is really annoying, and I'm thinking about switching to another distro because of this (and bug 1268257). But this happens only on an Acer Laptop, not on another one from Lenovo. $ lspci -v -s 4:0.0 04:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n Subsystem: Foxconn International, Inc. Device e04b Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at b350 (64-bit, non-prefetchable) [size=16K] Capabilities: access denied Kernel driver in use: wl Have I found the correct bug report, or should I file a new one? Is there any better workaround than the mine? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1270257 Title: NetworkManager failed to function after suspend and resume Status in network-manager package in Ubuntu: Confirmed Bug description: NetworkManager failed to function after resuming from suspend. The indicator applet in the Mac OS style menu bar showed the empty quarter-circle, and clicking Enable Networking didn't change the menu options or the style of the applet. Running sudo service network-manager restart brought back functionality. $ dpkg -l systemd* logind* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-==---== un logind none(no description available) un systemdnone(no description available) ii systemd-services 204-0ubuntu19.1 amd64systemd runtime services ii systemd-shim 6-0ubuntu0.13.10 amd64shim for systemd Thanks ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: network-manager 0.9.8.0-0ubuntu22 ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Fri Jan 17 10:08:48 2014 IfupdownConfig: auto lo iface lo inet loopback InstallationDate: Installed on 2012-10-18 (456 days ago) InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120823.1) IpRoute: default via 192.168.1.1 dev wlan0 proto static 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.14 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 MarkForUpload: True NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: Upgraded to saucy on 2013-11-06 (72 days ago) modified.conffile..etc.NetworkManager.NetworkManager.conf: [modified] mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2013-11-05T17:49:23 nmcli-dev: DEVICE TYPE STATE DBUS-PATH wlan0 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.0connected enabled enabled enabledenabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1270257/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1295909] Re: Unity spread trigger ruins windows and freezes desktop
This is the compiz crash file. Please tell me if I can do anything else to help or debug. ** Attachment added: _usr_bin_compiz.1000.crash https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1295909/+attachment/4392427/+files/_usr_bin_compiz.1000.crash -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/1295909 Title: Unity spread trigger ruins windows and freezes desktop Status in Compiz: Triaged Status in Unity: Confirmed Status in compiz package in Ubuntu: Triaged Status in unity package in Ubuntu: Confirmed Bug description: The latest update disabled window spreading and when triggered crashes the desktop. Everything freezes and windows cannot be switched. The only way to close an application is to shut down. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity 7.1.2+14.04.20140320.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-18.38-generic 3.13.6 Uname: Linux 3.13.0-18-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Fri Mar 21 20:59:17 2014 DistUpgraded: 2014-03-19 22:45:03,298 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: vboxhost, 4.3.8, 3.11.0-18-generic, x86_64: installed vboxhost, 4.3.8, 3.13.0-18-generic, x86_64: installed EcryptfsInUse: Yes GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0156] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:fa20] InstallationDate: Installed on 2014-01-03 (77 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MachineType: TOSHIBA Satellite C55-A ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-18-generic root=UUID=6b37c83b-b64c-42fc-89d3-3db46a397734 ro quiet splash vt.handoff=7 SourcePackage: unity UpgradeStatus: Upgraded to trusty on 2014-03-20 (1 days ago) dmi.bios.date: 04/12/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: 1.10 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: MP dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: OEM Chassis Manufacturer dmi.chassis.version: OEM Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvr1.10:bd04/12/2013:svnTOSHIBA:pnSatelliteC55-A:pvrPSCF6U-01Y00C:rvnTOSHIBA:rnPortablePC:rvrMP:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion: dmi.product.name: Satellite C55-A dmi.product.version: PSCF6U-01Y00C dmi.sys.vendor: TOSHIBA version.compiz: compiz 1:0.9.11+14.04.20140320.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0-1ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental 10.0.0-1ubuntu2 version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.15.0-1ubuntu7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Fri Mar 21 18:56:33 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 17223 vendor SDC xserver.version: 2:1.15.0-1ubuntu7 --- .tmp.unity.support.test.0: ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity DistUpgraded: 2014-03-19 22:45:03,298 DEBUG enabling apt cron job DistroCodename: trusty DistroRelease: Ubuntu 14.04 DistroVariant: ubuntu DkmsStatus: vboxhost, 4.3.8, 3.13.0-18-generic, x86_64: installed vboxhost, 4.3.8, 3.13.0-19-generic, x86_64: installed EcryptfsInUse: Yes GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0156] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:fa20] InstallationDate: Installed on 2014-01-03 (83 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MachineType:
[Touch-packages] [Bug 1295909] Re: Unity spread trigger ruins windows and freezes desktop
I've had problems with window spread before, too, but only on a laptop with Nvidia graphics. On another one with Intel graphics, it works flawlessly. Anyways, after upgrading to vivid, I tried to enable window spread using unity-tweak-tool again, and I got that freeze plus (after a while) crash again. But this time, it was so bad that I could not even log in any more. Afer entering my password, and after a second or so, I was always presented with a completely white (or light gray) screen, and after a mouse click, there was the login screen again. A reboot did not help, either. So after removing some config files in my home directory also did not help, I removed all nvidia-* packages. Now I could log in again, and finally I had a chance to switch window spread off again! (By the way, it still crashes.) I also got many apport crash popups after being able to login again (Xorg, compiz, apport). I guess I was hit by multiple bugs at once. Do you need any additional information? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/1295909 Title: Unity spread trigger ruins windows and freezes desktop Status in Compiz: Triaged Status in Unity: Confirmed Status in compiz package in Ubuntu: Triaged Status in unity package in Ubuntu: Confirmed Bug description: The latest update disabled window spreading and when triggered crashes the desktop. Everything freezes and windows cannot be switched. The only way to close an application is to shut down. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity 7.1.2+14.04.20140320.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-18.38-generic 3.13.6 Uname: Linux 3.13.0-18-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Fri Mar 21 20:59:17 2014 DistUpgraded: 2014-03-19 22:45:03,298 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: vboxhost, 4.3.8, 3.11.0-18-generic, x86_64: installed vboxhost, 4.3.8, 3.13.0-18-generic, x86_64: installed EcryptfsInUse: Yes GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0156] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:fa20] InstallationDate: Installed on 2014-01-03 (77 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MachineType: TOSHIBA Satellite C55-A ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-18-generic root=UUID=6b37c83b-b64c-42fc-89d3-3db46a397734 ro quiet splash vt.handoff=7 SourcePackage: unity UpgradeStatus: Upgraded to trusty on 2014-03-20 (1 days ago) dmi.bios.date: 04/12/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: 1.10 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: MP dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: OEM Chassis Manufacturer dmi.chassis.version: OEM Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvr1.10:bd04/12/2013:svnTOSHIBA:pnSatelliteC55-A:pvrPSCF6U-01Y00C:rvnTOSHIBA:rnPortablePC:rvrMP:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion: dmi.product.name: Satellite C55-A dmi.product.version: PSCF6U-01Y00C dmi.sys.vendor: TOSHIBA version.compiz: compiz 1:0.9.11+14.04.20140320.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0-1ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental 10.0.0-1ubuntu2 version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.15.0-1ubuntu7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Fri Mar 21 18:56:33 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 17223 vendor SDC xserver.version: 2:1.15.0-1ubuntu7 --- .tmp.unity.support.test.0: ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz