[Touch-packages] [Bug 2024618] [NEW] In some boots, screen display is totally black possible i915 issue
Public bug reported: Hi, In some boots my laptop's graphic card(Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx) only display a black screen, everything else seems to work, the system is able to produce sounds. Its possible to make the display go back to work after close and open the lid. After some tests and debug, it was seen that the screen wasn't entirely black the brightness seems to be setted to the minimum(almost impossible to see), and with a external monitor the brightness level was checked in `/sys/class/backlight/intel_backlight/actual_brightness` it was set to the default value, so the problem can't be the backlight. I believe is a i915 driver problem. it was tested the following kernel's params: i915.enable_dpcd_backlight=3 i915.enable_dpcd_backlight=1 i915.enable_dpcd_backlight=0 i915.invert_brightness=1 i915.invert_brightness=-1 i915.modeset=0 i915.modeset=1 i915.register_backlight=1 Still no results. Distributor ID: Ubuntu Description: Ubuntu 23.04 Release: 23.04 Codename: lunar xorg: Installed: 1:7.7+23ubuntu2 Candidate: 1:7.7+23ubuntu2 Version table: *** 1:7.7+23ubuntu2 500 500 http://br.archive.ubuntu.com/ubuntu lunar/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: xorg 1:7.7+23ubuntu2 ProcVersionSignature: Ubuntu 6.2.0-23.23-generic 6.2.12 Uname: Linux 6.2.0-23-generic x86_64 ApportVersion: 2.26.1-0ubuntu2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: unknown CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Wed Jun 21 16:03:20 2023 DistUpgraded: Fresh install DistroCodename: lunar DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] InstallationDate: Installed on 2023-06-21 (0 days ago) InstallationMedia: Ubuntu 23.04 "Lunar Lobster" - Release amd64 (20230418) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0bda:b720 Realtek Semiconductor Corp. RTL8723BU 802.11b/g/n WLAN Adapter Bus 001 Device 002: ID 0bda:5830 Realtek Semiconductor Corp. MTD camera Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Compaq 420 ProcEnviron: LANG=en_US.UTF-8 PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color XDG_RUNTIME_DIR= ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.2.0-23-generic root=UUID=774e3ecb-1e91-4c0e-8036-66b475c7f433 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) acpidump: Error: command ['pkexec', '/usr/share/apport/dump_acpi_tables.py'] failed with exit code 126: Error executing command as another user: Request dismissed dmi.bios.date: 09/27/2021 dmi.bios.release: 5.11 dmi.bios.version: V1.13.X dmi.board.asset.tag: Default string dmi.board.name: N14JP6-V2 dmi.board.vendor: Compaq dmi.chassis.asset.tag: Default string dmi.chassis.type: 10 dmi.chassis.vendor: Compaq dmi.chassis.version: Default string dmi.ec.firmware.release: 1.0 dmi.modalias: dmi:bvn:bvrV1.13.X:bd09/27/2021:br5.11:efr1.0:svnCompaq:pn420:pvrDefaultstring:rvnCompaq:rnN14JP6-V2:rvr:cvnCompaq:ct10:cvrDefaultstring:skuDefaultstring: dmi.product.family: Presario dmi.product.name: 420 dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Compaq version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.114-1 version.libgl1-mesa-dri: libgl1-mesa-dri 23.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.7-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lunar ubuntu wayland-session ** Description changed: - Hi, - In some boots my laptopt graphic card(Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx) only display a black screen, everything else seems to work, the system is able to produce sounds. Its possible to make the display go back to work after close and open the lid. After some tests and debug, it was seen that the screen wasn't entirely black the brightness seems to be setted to the minimum(almost impossible to see), and with a external monitor the brightness level was checked in `/sys/class/backlight/intel_backlight/actual_brightness` it was set to the default value, so the problem can't be the backlight. I believe is a i915 driver
[Touch-packages] [Bug 2002563] [NEW] The ethernet connection icon has disappeared
Public bug reported: The ethernet connection icon has disappeared, it's a cosmetic problem, I can access the internet both via cable, WI-FI and VPN, I would like to report this error, as I still haven't found a solution to the problem on the internet. In settings, it also disappeared, only the VPN settings are still visible. (I used google translator, if possible answer me in Portuguese.) ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: network-manager 1.40.0-1ubuntu2 ProcVersionSignature: Ubuntu 5.19.0-26.27-generic 5.19.7 Uname: Linux 5.19.0-26-generic x86_64 ApportVersion: 2.23.1-0ubuntu3 Architecture: amd64 CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Jan 11 14:50:09 2023 InstallationDate: Installed on 2022-07-29 (166 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IpRoute: default via 192.168.1.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.82 SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.40.0 connected started limited enabled enabled disabled missing enabled ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug kinetic wayland-session -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/2002563 Title: The ethernet connection icon has disappeared Status in network-manager package in Ubuntu: New Bug description: The ethernet connection icon has disappeared, it's a cosmetic problem, I can access the internet both via cable, WI-FI and VPN, I would like to report this error, as I still haven't found a solution to the problem on the internet. In settings, it also disappeared, only the VPN settings are still visible. (I used google translator, if possible answer me in Portuguese.) ProblemType: Bug DistroRelease: Ubuntu 22.10 Package: network-manager 1.40.0-1ubuntu2 ProcVersionSignature: Ubuntu 5.19.0-26.27-generic 5.19.7 Uname: Linux 5.19.0-26-generic x86_64 ApportVersion: 2.23.1-0ubuntu3 Architecture: amd64 CRDA: N/A CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Wed Jan 11 14:50:09 2023 InstallationDate: Installed on 2022-07-29 (166 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) IpRoute: default via 192.168.1.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.82 SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.40.0 connected started limited enabled enabled disabled missing enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/2002563/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] Re: [AMD Ellesmere] Crackling sound on Pulseaudio
The issue goes away when speech-dispatcher is uninstalled, meaning that this package is related to the bug in question, and is resolved once it is removed. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: [AMD Ellesmere] Crackling sound on Pulseaudio Status in pulseaudio package in Ubuntu: Confirmed Status in speech-dispatcher package in Ubuntu: New Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] Re: [AMD Ellesmere] Crackling sound on Pulseaudio
@ppq I've actually been able to determine what the issue was. The speech- dispatcher package is the one causing issues. It is possible to uninstall it from any Ubuntu installation (or Ubuntu-based distros). But to make sure that indeed this is what is causing the issue in your case, try to run this command on your Terminal: speech-dispatcher -K And check if the crackling noise will go away. If it does, uninstall it using apt: sudo apt remove speech-dispatcher (or replace remove with autoremove if you want to also uninstall any packages related to speech-dispatcher). It seems that this package will stop behaving correctly after some time with the system running, and will interfere with everything that pulseaudio will output. ** Also affects: speech-dispatcher (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: [AMD Ellesmere] Crackling sound on Pulseaudio Status in pulseaudio package in Ubuntu: Confirmed Status in speech-dispatcher package in Ubuntu: New Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1963738] [NEW] [Latitude 9420, Intel Tigerlake HDMI, Digital Out, HDMI] No sound at all
Public bug reported: Sound only works when inserting a headphone. Speakers do not work at all. Device appears as unplugged on pavucontrol. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.13.0-30.33~20.04.1-generic 5.13.19 Uname: Linux 5.13.0-30-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mfe 4 F pulseaudio /dev/snd/pcmC0D2p: mfe 4 F...m pulseaudio /dev/snd/pcmC0D1c: mfe 4 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Sat Mar 5 09:46:34 2022 InstallationDate: Installed on 2022-02-25 (7 days ago) InstallationMedia: Ubuntu 20.04.3 LTS "Focal Fossa" - Release amd64 (20210819) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:sofsoundwire failed Symptom_Card: sof-soundwire - sof-soundwire Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mfe 4 F pulseaudio /dev/snd/pcmC0D2p: mfe 4 F...m pulseaudio /dev/snd/pcmC0D1c: mfe 4 F...m pulseaudio Symptom_Jack: Digital Out, HDMI Symptom_Type: No sound at all Title: [Latitude 9420, Intel Tigerlake HDMI, Digital Out, HDMI] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/11/2021 dmi.bios.release: 1.7 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.7.1 dmi.board.name: 08XKF8 dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 31 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.7.1:bd11/11/2021:br1.7:svnDellInc.:pnLatitude9420:pvr:rvnDellInc.:rn08XKF8:rvrA01:cvnDellInc.:ct31:cvr:sku0A5B: dmi.product.family: Latitude dmi.product.name: Latitude 9420 dmi.product.sku: 0A5B dmi.sys.vendor: Dell Inc. ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1963738 Title: [Latitude 9420, Intel Tigerlake HDMI, Digital Out, HDMI] No sound at all Status in alsa-driver package in Ubuntu: New Bug description: Sound only works when inserting a headphone. Speakers do not work at all. Device appears as unplugged on pavucontrol. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.13.0-30.33~20.04.1-generic 5.13.19 Uname: Linux 5.13.0-30-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mfe 4 F pulseaudio /dev/snd/pcmC0D2p: mfe 4 F...m pulseaudio /dev/snd/pcmC0D1c: mfe 4 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Sat Mar 5 09:46:34 2022 InstallationDate: Installed on 2022-02-25 (7 days ago) InstallationMedia: Ubuntu 20.04.3 LTS "Focal Fossa" - Release amd64 (20210819) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:sofsoundwire failed Symptom_Card: sof-soundwire - sof-soundwire Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mfe 4 F pulseaudio /dev/snd/pcmC0D2p: mfe 4 F...m pulseaudio /dev/snd/pcmC0D1c: mfe 4 F...m pulseaudio Symptom_Jack: Digital Out, HDMI Symptom_Type: No sound at all Title: [Latitude 9420, Intel Tigerlake HDMI, Digital Out, HDMI] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/11/2021 dmi.bios.release: 1.7 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.7.1 dmi.board.name: 08XKF8 dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 31 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.7.1:bd11/11/2021:br1.7:svnDellInc.:pnLatitude9420:pvr:rvnDellInc.:rn08XKF8:rvrA01:cvnDellInc.:ct31:cvr:sku0A5B: dmi.product.family: Latitude dmi.product.name: Latitude 9420 dmi.product.sku: 0A5B dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1963738/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] Re: [AMD Ellesmere] Crackling sound on Pulseaudio
The problem still occurs on the latest stable PulseAudio packages (1:15.0+dfsg1-1ubuntu2.2) for Ubuntu 21.10. Also, doing a "pulseaudio -k" on the Terminal, and then restarting any software that was outputting audio, fixes the issue. I've noticed that this only happens after the output audio device is changed between the available devices. So, going from the "HDMI/DP3 output" to "Digital Output" and then back will cause the crackling after a few minutes. ** Attachment added: "Audio output devices" https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+attachment/205/+files/Captura%20de%20tela%20de%202022-01-18%2014-07-36.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: [AMD Ellesmere] Crackling sound on Pulseaudio Status in pulseaudio package in Ubuntu: Confirmed Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] Re: [AMD Ellesmere HDMI Audio over DisplayPort] Crackling sound on Pulseaudio for Ubuntu 21.04
OK, so I've found out that the crackling only starts when I change the audio output for the first time after starting Ubuntu up. After that, it only stops if I restart the pulseaudio service, or by restarting the PC. So, the issue clearly has something to do with the change in output audio device. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: [AMD Ellesmere HDMI Audio over DisplayPort] Crackling sound on Pulseaudio for Ubuntu 21.04 Status in pulseaudio package in Ubuntu: New Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] Re: [Asus PRIME B450-PLUS] Crackling sound on Pulseaudio for Ubuntu 21.04
This issue isn't related to the motherboard itself, because I have the monitor connected to the RX 580's DisplayPort output, not the internal audio output. I don't get this issue while using USB-C audio, Analog output/input or through HDMI, only DisplayPort. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: [Asus PRIME B450-PLUS] Crackling sound on Pulseaudio for Ubuntu 21.04 Status in pulseaudio package in Ubuntu: New Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] Re: Crackling sound on Pulseaudio for Ubuntu 21.04
I am going to add those attachements on this comment and the next one, but keep in mind comments #2 and #3, which are for those files. ** Attachment added: "Spotify Static" https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+attachment/5504574/+files/Weird%20sound.mp3 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: Crackling sound on Pulseaudio for Ubuntu 21.04 Status in pulseaudio package in Ubuntu: New Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] Re: Crackling sound on Pulseaudio for Ubuntu 21.04
This is the static that can be heard while playing a song from YouTube on Firefox. Notice that the crackling starts right away when pressing play on the video, but it also has a delay to stop the static. ** Attachment added: "YouTube/Firefox crackling" https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+attachment/5504573/+files/While%20playing%20videos.m4a -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: Crackling sound on Pulseaudio for Ubuntu 21.04 Status in pulseaudio package in Ubuntu: New Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] Re: Crackling sound on Pulseaudio for Ubuntu 21.04
Also, I can add that I've only noticed this issue happening while using DisplayPort, and playing back sound through my LG Monitor. This doesn't happen when using a USB or Headphone jack headphone/headset. Also, I've never noticed it happening when using an HDMI monitor, only DP. It could be a bug with the display drivers, but I find it to be unlikely, given that restarting PulseAudio fixes the issue temporarily, and then it comes back. ** Attachment removed: "Spotify Static" https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+attachment/5504572/+files/Weird%20sound.m4a ** Attachment removed: "YouTube/Firefox crackling" https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+attachment/5504573/+files/While%20playing%20videos.m4a -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: Crackling sound on Pulseaudio for Ubuntu 21.04 Status in pulseaudio package in Ubuntu: New Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] Re: Crackling sound on Pulseaudio for Ubuntu 21.04
Also, I've noticed that if I don't play anything for a few minutes, the static can't be heard. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: Crackling sound on Pulseaudio for Ubuntu 21.04 Status in pulseaudio package in Ubuntu: New Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] Re: Crackling sound on Pulseaudio for Ubuntu 21.04
Here is the YouTube static. ** Attachment added: "YouTube/Firefox static" https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+attachment/5504575/+files/While%20playing%20videos.mp3 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: Crackling sound on Pulseaudio for Ubuntu 21.04 Status in pulseaudio package in Ubuntu: New Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] Re: Crackling sound on Pulseaudio for Ubuntu 21.04
Static that plays back while playing a song on Spotify (Snap). ** Attachment added: "Spotify Static" https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+attachment/5504572/+files/Weird%20sound.m4a -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: Crackling sound on Pulseaudio for Ubuntu 21.04 Status in pulseaudio package in Ubuntu: New Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1931902/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1931902] [NEW] Crackling sound on Pulseaudio for Ubuntu 21.04
Public bug reported: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release:21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio /dev/snd/controlC0: matheus 18662 F pulseaudio /dev/snd/pcmC0D8p: matheus 18662 F...m pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jun 14 16:58:43 2021 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2021-05-03 (41 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3002 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3002:bd03/11/2021:br5.17:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug hirsute -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1931902 Title: Crackling sound on Pulseaudio for Ubuntu 21.04 Status in pulseaudio package in Ubuntu: New Bug description: While playing back any sounds, a certain crackling sound (static) will play with a fixed delay of the sound being played. The amount and volume of the static will depend on the sound/music that is being played, and this only starts occurring after a somewhat long time (30 minutes or more). What is interesting to see is that while playing back music from Spotify (Snap) the static will only start after a second or so, but when playing YouTube videos on Firefox, it will be immediate and output that static while the video is playing. I've added two sound recordings, one while playing back a song from Spotify and the other while playing a song from YouTube. This issue goes away when restarting the PulseAudio service, but it comes back after a random amount of time. 1) Description: Ubuntu 21.04 Release: 21.04 2) pulseaudio: Installed: 1:14.2-1ubuntu1 Candidate: 1:14.2-1ubuntu1 Version table: 1:14.2-1ubuntu1.1 1 (phased 10%) 500 http://br.archive.ubuntu.com/ubuntu hirsute-updates/main amd64 Packages *** 1:14.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu hirsute/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: pulseaudio 1:14.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-18.19-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC3: matheus 18662 F pulseaudio /dev/snd/controlC2: matheus 18662 F pulseaudio
[Touch-packages] [Bug 1904903] [NEW] Pulseaudio always defaults to any external audio device connected when booting up
Public bug reported: When I am booting the computer up, it never sets the default output to the one I was using previously, which should be the norm. This is also the same for audio inputs. It works perfectly fine when connecting any new sound sources to the PC, which then pulseaudio sets the output/input to. But regarding it's state when booting up, it should stay on the last used audio device. 1) Description: Ubuntu 20.10 Release:20.10 2) pulseaudio: Instalado: 1:13.99.2-1ubuntu2 Candidato: 1:13.99.2-1ubuntu2 Tabela de versão: *** 1:13.99.2-1ubuntu2 500 500 http://br.archive.ubuntu.com/ubuntu groovy-updates/main amd64 Packages 100 /var/lib/dpkg/status 1:13.99.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu groovy/main amd64 Packages ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1904903 Title: Pulseaudio always defaults to any external audio device connected when booting up Status in pulseaudio package in Ubuntu: New Bug description: When I am booting the computer up, it never sets the default output to the one I was using previously, which should be the norm. This is also the same for audio inputs. It works perfectly fine when connecting any new sound sources to the PC, which then pulseaudio sets the output/input to. But regarding it's state when booting up, it should stay on the last used audio device. 1) Description: Ubuntu 20.10 Release: 20.10 2) pulseaudio: Instalado: 1:13.99.2-1ubuntu2 Candidato: 1:13.99.2-1ubuntu2 Tabela de versão: *** 1:13.99.2-1ubuntu2 500 500 http://br.archive.ubuntu.com/ubuntu groovy-updates/main amd64 Packages 100 /var/lib/dpkg/status 1:13.99.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu groovy/main amd64 Packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1904903/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1904902] [NEW] Pulseaudio produces a lot of crackling audio after awhile
Public bug reported: 1) Description: Ubuntu 20.10 Release: 20.10 2) pulseaudio: Instalado: 1:13.99.2-1ubuntu2 Candidato: 1:13.99.2-1ubuntu2 Tabela de versão: *** 1:13.99.2-1ubuntu2 500 500 http://br.archive.ubuntu.com/ubuntu groovy-updates/main amd64 Packages 100 /var/lib/dpkg/status 1:13.99.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu groovy/main amd64 Packages 3) What you expected to happen: It shouldn't produce any crackles in the audio after a set amount of time. 4) What happened instead: It starts to crackle with a very low volume, then it keeps increasing until it reaches the same volume as the music/audio. Running systemctl --user restart pulseaudio.service fixes the issue until the next restart. ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.2-1ubuntu2 ProcVersionSignature: Ubuntu 5.8.0-29.31-generic 5.8.14 Uname: Linux 5.8.0-29-generic x86_64 ApportVersion: 2.20.11-0ubuntu50.1 Architecture: amd64 CasperMD5CheckResult: skip Date: Thu Nov 19 14:09:37 2020 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2020-06-16 (156 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, no user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/14/2020 dmi.bios.release: 5.13 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2202 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2202:bd07/14/2020:br5.13:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug groovy -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1904902 Title: Pulseaudio produces a lot of crackling audio after awhile Status in pulseaudio package in Ubuntu: New Bug description: 1) Description: Ubuntu 20.10 Release: 20.10 2) pulseaudio: Instalado: 1:13.99.2-1ubuntu2 Candidato: 1:13.99.2-1ubuntu2 Tabela de versão: *** 1:13.99.2-1ubuntu2 500 500 http://br.archive.ubuntu.com/ubuntu groovy-updates/main amd64 Packages 100 /var/lib/dpkg/status 1:13.99.2-1ubuntu1 500 500 http://br.archive.ubuntu.com/ubuntu groovy/main amd64 Packages 3) What you expected to happen: It shouldn't produce any crackles in the audio after a set amount of time. 4) What happened instead: It starts to crackle with a very low volume, then it keeps increasing until it reaches the same volume as the music/audio. Running systemctl --user restart pulseaudio.service fixes the issue until the next restart. ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: pulseaudio 1:13.99.2-1ubuntu2 ProcVersionSignature: Ubuntu 5.8.0-29.31-generic 5.8.14 Uname: Linux 5.8.0-29-generic x86_64 ApportVersion: 2.20.11-0ubuntu50.1 Architecture: amd64 CasperMD5CheckResult: skip Date: Thu Nov 19 14:09:37 2020 ExecutablePath: /usr/bin/pulseaudio InstallationDate: Installed on 2020-06-16 (156 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, no user) SHELL=/bin/bash XDG_RUNTIME_DIR= SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/14/2020 dmi.bios.release: 5.13 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2202 dmi.board.asset.tag: Default string dmi.board.name: PRIME B450-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2202:bd07/14/2020:br5.13:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEB450-PLUS:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to:
[Touch-packages] [Bug 1867521] [NEW] package unattended-upgrades 2.0 failed to install/upgrade: installed unattended-upgrades package post-installation script subprocess returned error exit status 128
Public bug reported: The installation process was stuck, and it never finished, so after forcing a restart and login back in, the error was presented and it allow me to send it to you guys, so that it is fixed. ProblemType: Package DistroRelease: Ubuntu 20.04 Package: unattended-upgrades 2.0 ProcVersionSignature: Ubuntu 5.4.0-18.22-generic 5.4.24 Uname: Linux 5.4.0-18-generic x86_64 .var.log.unattended-upgrades.unattended-upgrades.log: ApportVersion: 2.20.11-0ubuntu20 Architecture: amd64 Date: Sun Mar 15 11:45:51 2020 ErrorMessage: installed unattended-upgrades package post-installation script subprocess returned error exit status 128 InstallationDate: Installed on 2020-02-18 (25 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: dpkg 1.19.7ubuntu2 apt 2.0.0 SourcePackage: unattended-upgrades Title: package unattended-upgrades 2.0 failed to install/upgrade: installed unattended-upgrades package post-installation script subprocess returned error exit status 128 UpgradeStatus: No upgrade log present (probably fresh install) modified.conffile..etc.apt.apt.conf.d.10periodic: APT::Periodic::Update-Package-Lists "1"; APT::Periodic::Download-Upgradeable-Packages "0"; APT::Periodic::AutocleanInterval "0"; APT::Periodic::Unattended-Upgrade "0"; mtime.conffile..etc.apt.apt.conf.d.10periodic: 2020-03-03T15:51:02.219809 ** Affects: unattended-upgrades (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package focal third-party-packages -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unattended-upgrades in Ubuntu. https://bugs.launchpad.net/bugs/1867521 Title: package unattended-upgrades 2.0 failed to install/upgrade: installed unattended-upgrades package post-installation script subprocess returned error exit status 128 Status in unattended-upgrades package in Ubuntu: New Bug description: The installation process was stuck, and it never finished, so after forcing a restart and login back in, the error was presented and it allow me to send it to you guys, so that it is fixed. ProblemType: Package DistroRelease: Ubuntu 20.04 Package: unattended-upgrades 2.0 ProcVersionSignature: Ubuntu 5.4.0-18.22-generic 5.4.24 Uname: Linux 5.4.0-18-generic x86_64 .var.log.unattended-upgrades.unattended-upgrades.log: ApportVersion: 2.20.11-0ubuntu20 Architecture: amd64 Date: Sun Mar 15 11:45:51 2020 ErrorMessage: installed unattended-upgrades package post-installation script subprocess returned error exit status 128 InstallationDate: Installed on 2020-02-18 (25 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: dpkg 1.19.7ubuntu2 apt 2.0.0 SourcePackage: unattended-upgrades Title: package unattended-upgrades 2.0 failed to install/upgrade: installed unattended-upgrades package post-installation script subprocess returned error exit status 128 UpgradeStatus: No upgrade log present (probably fresh install) modified.conffile..etc.apt.apt.conf.d.10periodic: APT::Periodic::Update-Package-Lists "1"; APT::Periodic::Download-Upgradeable-Packages "0"; APT::Periodic::AutocleanInterval "0"; APT::Periodic::Unattended-Upgrade "0"; mtime.conffile..etc.apt.apt.conf.d.10periodic: 2020-03-03T15:51:02.219809 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unattended-upgrades/+bug/1867521/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1805426] Re: Not able to log in into Google Account, aswell as Microsoft account
** Changed in: gnome-online-accounts (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gnome-online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1805426 Title: Not able to log in into Google Account, aswell as Microsoft account Status in gnome-initial-setup package in Ubuntu: Invalid Status in gnome-online-accounts package in Ubuntu: Invalid Bug description: After the first boot up of Ubuntu 18.10, it invites me to log-in into several accounts, including Google and Microsoft accounts. After I log-in into Ubuntu One, my next step is to log in my Google Account, but the log-in page never loads, and when it does (after a couple of minutes), and I insert my log in credentials, it fails the log-in process, all of this happens with the Microsoft account too. The Ubuntu One account logs-in without a hitch, but the rest does not. 1) Description: Ubuntu 18.10 Release: 18.10 2) gnome-initial-setup: Instalado: 3.30.0-1ubuntu3 Candidato: 3.30.0-1ubuntu3.1 Tabela de versão: 3.30.0-1ubuntu3.1 500 500 http://br.archive.ubuntu.com/ubuntu cosmic-updates/main amd64 Packages *** 3.30.0-1ubuntu3 500 500 http://br.archive.ubuntu.com/ubuntu cosmic/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: gnome-initial-setup 3.30.0-1ubuntu3 ProcVersionSignature: Ubuntu 4.18.0-11.12-generic 4.18.12 Uname: Linux 4.18.0-11-generic x86_64 ApportVersion: 2.20.10-0ubuntu13 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Tue Nov 27 11:12:31 2018 ExecutablePath: /usr/lib/gnome-initial-setup/gnome-initial-setup InstallationDate: Installed on 2018-11-27 (0 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) ProcEnviron: LANGUAGE=pt_BR:pt:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=pt_BR.UTF-8 SHELL=/bin/bash SourcePackage: gnome-initial-setup UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-initial-setup/+bug/1805426/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1805426] Re: Not able to log in into Google Account, aswell as Microsoft account
Yes, that wouldn't be a problem. Steps: 1 - Open the GNOME Control Center (Ubuntu Settings, or Configurations); 2 - Select "Network" on the left sidebar; 3 - Press the small cog-wheel (Network Configurations); 4 - Select the IPv6 tab; 5 - On IPv6 Method, select disabled (on my system, it is on Automatic); After that, GOA doesn't load the login screens that I've detailed on earlier comments. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gnome-online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1805426 Title: Not able to log in into Google Account, aswell as Microsoft account Status in gnome-initial-setup package in Ubuntu: Invalid Status in gnome-online-accounts package in Ubuntu: New Bug description: After the first boot up of Ubuntu 18.10, it invites me to log-in into several accounts, including Google and Microsoft accounts. After I log-in into Ubuntu One, my next step is to log in my Google Account, but the log-in page never loads, and when it does (after a couple of minutes), and I insert my log in credentials, it fails the log-in process, all of this happens with the Microsoft account too. The Ubuntu One account logs-in without a hitch, but the rest does not. 1) Description: Ubuntu 18.10 Release: 18.10 2) gnome-initial-setup: Instalado: 3.30.0-1ubuntu3 Candidato: 3.30.0-1ubuntu3.1 Tabela de versão: 3.30.0-1ubuntu3.1 500 500 http://br.archive.ubuntu.com/ubuntu cosmic-updates/main amd64 Packages *** 3.30.0-1ubuntu3 500 500 http://br.archive.ubuntu.com/ubuntu cosmic/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: gnome-initial-setup 3.30.0-1ubuntu3 ProcVersionSignature: Ubuntu 4.18.0-11.12-generic 4.18.12 Uname: Linux 4.18.0-11-generic x86_64 ApportVersion: 2.20.10-0ubuntu13 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Tue Nov 27 11:12:31 2018 ExecutablePath: /usr/lib/gnome-initial-setup/gnome-initial-setup InstallationDate: Installed on 2018-11-27 (0 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) ProcEnviron: LANGUAGE=pt_BR:pt:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=pt_BR.UTF-8 SHELL=/bin/bash SourcePackage: gnome-initial-setup UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-initial-setup/+bug/1805426/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1664408] [NEW] Não detecta
Public bug reported: Não esta detectando a placa de video NVIDIA-820M ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40 Uname: Linux 4.4.0-62-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 BootLog: CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Mon Feb 13 21:56:14 2017 DistUpgraded: Fresh install DistroCodename: xenial DistroVariant: ubuntu GraphicsCard: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Broadwell-U Integrated Graphics [1028:0655] Subsystem: Dell GeForce 820M [1028:0655] InstallationDate: Installed on 2017-02-12 (1 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: Dell Inc. Inspiron 3443 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic.efi.signed root=UUID=416809d0-a1c9-440f-afee-a27e1a9bf8b3 ro quiet splash SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/13/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 07GVPJ dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA08:bd05/13/2016:svnDellInc.:pnInspiron3443:pvrA08:rvnDellInc.:rn07GVPJ:rvrA00:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Inspiron 3443 dmi.product.version: A08 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.12.2+16.04.20160823-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.70-1~ubuntu16.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 12.0.6-0ubuntu0.16.04.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 12.0.6-0ubuntu0.16.04.1 version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-0ubuntu0.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Mon Feb 13 19:22:48 2017 xserver.configfile: default xserver.errors: Failed to load module "nvidia" (module does not exist, 0) Failed to load module "nvidia" (module does not exist, 0) NOUVEAU(G0): [XvMC] Failed to initialize extension. xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id1112 vendor LGD xserver.version: 2:1.18.4-0ubuntu0.2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1664408 Title: Não detecta Status in xorg package in Ubuntu: New Bug description: Não esta detectando a placa de video NVIDIA-820M ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40 Uname: Linux 4.4.0-62-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 BootLog: CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Mon Feb 13 21:56:14 2017 DistUpgraded: Fresh install DistroCodename: xenial DistroVariant: ubuntu GraphicsCard: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Broadwell-U Integrated Graphics [1028:0655] Subsystem: Dell GeForce 820M [1028:0655] InstallationDate: Installed on 2017-02-12 (1 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: Dell Inc. Inspiron 3443 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic.efi.signed root=UUID=416809d0-a1c9-440f-afee-a27e1a9bf8b3 ro quiet splash SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/13/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 07GVPJ dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias:
[Touch-packages] [Bug 1446081] Re: Incorrect scaling of launcher icons
Same issue here. Please Canonical fix this. ** Attachment added: Icons crashed https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1446081/+attachment/4438334/+files/Screenshot%20from%202015-06-11%2012-11-02.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/1446081 Title: Incorrect scaling of launcher icons Status in Unity: Confirmed Status in unity package in Ubuntu: Confirmed Bug description: Launcher icons shown w/o issues only on this sizes of launcher: 16, 24, 32, 48, 64. Screenshot attached. Look at Sublime, Chrome and Skype icons. There was no such issue before vivid. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: unity 7.3.2+15.04.20150410.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-14.14-generic 3.19.3 Uname: Linux 3.19.0-14-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CurrentDesktop: Unity Date: Mon Apr 20 00:26:44 2015 JournalErrors: Error: command ['journalctl', '-b', '--priority', 'warning'] failed with exit code 1: No journal files were found. SourcePackage: unity UpgradeStatus: Upgraded to vivid on 2015-03-27 (23 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1446081/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
