[U-Boot] Pull request: u-boot-arm/master -- from a temporary repository

2013-08-18 Thread Albert ARIBAUD 
Hello Tom,

The following changes since commit
aaf5e825606a70ddc8fca8e366d8c16a6fd3cc7c:

  Merge branch 'master' of git://git.denx.de/u-boot-nds32 (2013-07-25
  08:51:51 -0400)

are available in the git repository at:

  git://88.191.163.10/u-boot-arm master

for you to fetch changes up to 9ed887caecb9ecb0c68773a1870d143b9f28d3da:

  Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17
  18:24:13 +0200)



Albert ARIBAUD (2):
  Merge branch 'u-boot/master' into u-boot-arm/master
  Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

Andreas Bießmann (1):
  omap3/sys_info: fix printout of OMAP36XX L3 freqency

Ash Charles (1):
  omap: overo: Use 200MHz SDRC timings for revision 1, 2  3 boards

Christian Riesch (1):
  da850evm: Use clrbits function with correct endianess

Dan Murphy (2):
  gpio: tca642x: Add the tca642x gpio expander driver
  gpio: omap5-uevm: Configure the tca6424 gpio expander

Dinh Nguyen (1):
  socfpga: Move board/socfpga_cyclone5 to board/socfpga

Dirk Behme (1):
  mxc_gpio: Correct the GPIO handling in gpio_direction_output()

Enric Balletbo i Serra (5):
  ARM: IGEP0033: Remove undef of CONFIG_CMD_MEMTEST
  ARM: IGEP0033: Remove CYGNUS name from header.
  ARM: IGEP0033: Add support to boot from NAND.
  ARM: IGEP0033: Remove duplicate / unused #defines.
  ARM: igep00x0.h: Enable the use of CMD_EXT4, CMD_FS_GENERIC and
zImage.

Enric Balletbò i Serra (1):
  ARM: IGEP0033: Add support for Flattened Device Tree.

Eric Nelson (1):
  mxc_ipuv3: fix memory alignment of framebuffer

Fabio Estevam (1):
  mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x

Heiko Schocher (6):
  net, phy, cpsw: fix gigabit register access
  ARM: AM33xx: Move s_init to a common place
  arm/davinci/da850: add uart0_pins_rtscts and RMII_MHz_50_CLK in
emac_pins_rmii pinmux bootstage: get more BOOTSTAGE_ID* in
show_boot_progress() arm, da850: enable the correct uart in
arch_cpu_init() arm, da850: add ipam390 board support

Javier Martinez Canillas (1):
  OMAP3: igep00x0: allow booting with a FDT from MMC

Justin Waters (6):
  am335x_evm: Make NAND support modular
  am335x_evm: Add command line editing
  am335x_evm: Rework bootcmd to handle two MMC devs
  Add additional MLO images to .gitignore
  am335x_evm: Add support for eMMC environment
  am335x_evm: Add am335x_boneblack variant

Lokesh Vutla (10):
  ARM: DRA7xx: Lock DPLL_GMAC
  ARM: AM33xx: Cleanup dplls data
  ARM: AM33xx: Cleanup clocks layer
  musb: Disable extra prints
  ARM: AM43xx: Add Board files
  ARM: AM43xx: Add header files
  ARM: AM43xx: clocks: Add dpll and clock data
  ARM: OMAP: Add CONFIG_OMAP_COMMON
  ARM: AM43xx: Add build support
  ARM: AM43xx: Add config file

Marek Vasut (1):
  ARM: mxs: Consolidate configuration options

Masahiro Yamada (1):
  ARM: omap24xx: remove remainders of dead board

Mugunthan V N (6):
  drivers: net: cpsw: remove hard coding bd ram for cpsw
  drivers: net: cpsw: Enable statistics for all port
  ARM: DRA7xx: Enable GMAC clock control
  ARM: DRA7xx: Add CPSW support to DRA7xx EVM
  ARM: DRA7xx: Add CPSW and MDIO pinmux support
  ARM: DRA7xx: Enable CPSW Ethernet support

Naumann Andreas (1):
  ARM: omap3: Implement dpll5 (HSUSB clk) workaround for
OMAP36xx/AM/DM37xx according to errata sprz318e.

Nishanth Menon (6):
  omap3_beagle: remove JFFS2 support.
  omap3_beagle: replace uImage.beagle with generic uImage
  beagleboard: remove RevB support for BeagleBoard Xm
  omap3_beagle: enable CMD_FS_GENERIC and simplify load of
image/ramdisk omap3_beagle: support findfdt and loadfdt for devicetree
support omap3_beagle: support booting from zImage and device tree as
last option

Otavio Salvador (1):
  wandboard: Use splash image at screen center by default

Pardeep Kumar Singla (2):
  mx6: Factor out common HDMI setup code
  mx6qsabresd: Add splash screen support via HDMI

Rob Herring (10):
  ARM: move interrupt_init to before relocation
  net: calxedaxgmac: enable rx cut-thru
  ARM: highbank: update config options
  ARM: highbank: fix get_tbclk value to timer rate
  ARM: highbank: set timer prescaler to 256
  ARM: highbank: avoid bss write in timer_init
  ARM: highbank: enable reset on command timeout
  ARM: highbank: setup peripherals based on power domain status
  ARM: highbank: compile misc_init_r only if CONFIG_MISC_INIT_R
  highbank: enable keyed autoboot stop

Robert Winkler (2):
  imx: Add documentation for imx specific commands
  imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors

Stefan Roese (1):
  arm: omap3: spl: Fix problem with 8bit NAND devices

Stefano Babic (1):
  Merge git://git.denx.de/u-boot-arm

Steve Kipisz (2):
  am335x_evm:

Re: [U-Boot] Pull request - arm/zynq v2

2013-08-18 Thread Tom Rini 
On Sat, Aug 17, 2013 at 05:42:22PM +0200, Albert ARIBAUD wrote:

 Hi Michal,
 
 On Mon, 12 Aug 2013 09:05:00 +0200, Michal Simek mon...@monstr.eu
 wrote:
 
  Hi Albert,
  
  please pull these 3 zynq patches to your arm tree.
  
  There is still pending the arm: lds: Remove libgcc eabi exception handling 
  tables
  patch. Have you considered to also add it?
  
  v2:
  - Changed email address,
  - There was incorrect rebase which I have fixed - correct sha1 now
  
  Thanks.
  Michal
  
  
  The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:
  
nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)
  
  are available in the git repository at:
  
git://www.denx.de/git/u-boot-microblaze.git zynq
  
  for you to fetch changes up to 2d83d33a51926d6471eb9282d03d83783850d565:
  
zynq: Enable axi ethernet and emaclite driver initialization (2013-08-12 
  08:59:56 +0200)
  
  
  Michal Simek (3):
zynq: Add new ddrc driver for ECC support
zynq: slcr: Wait 100ms till clk is properly setup
zynq: Enable axi ethernet and emaclite driver initialization
  
   arch/arm/cpu/armv7/zynq/Makefile   |  1 +
   arch/arm/cpu/armv7/zynq/ddrc.c | 50 
  ++
   arch/arm/cpu/armv7/zynq/slcr.c |  2 +-
   arch/arm/include/asm/arch-zynq/hardware.h  |  8 +
   arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
   board/xilinx/zynq/board.c  | 19 
   6 files changed, 80 insertions(+), 1 deletion(-)
   create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c
 
 I cannot merge these three commits without merging a lot of nds32 stuff
 too, apparently, and I don't want to. If this stuff is not needed for
 the three commits, then please rebase them so that they don't pull
 anything else in.

Alternatively, can I get a pull request for nds32?  Thanks!

-- 
Tom


signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH] serial: arm_dcc: Convert to use default_serial_puts

2013-08-18 Thread Marek Vasut 
Dear Axel Lin,

 Use default_serial_puts() instead of its own implementation.
 
 Signed-off-by: Axel Lin axel@ingics.com

Thanks,

Acked-by: Marek Vasut ma...@denx.de

 ---
  drivers/serial/arm_dcc.c | 8 +---
  1 file changed, 1 insertion(+), 7 deletions(-)
 
 diff --git a/drivers/serial/arm_dcc.c b/drivers/serial/arm_dcc.c
 index 29d9295..5dfb02f 100644
 --- a/drivers/serial/arm_dcc.c
 +++ b/drivers/serial/arm_dcc.c
 @@ -123,12 +123,6 @@ static void arm_dcc_putc(char ch)
   write_dcc(ch);
  }
 
 -static void arm_dcc_puts(const char *s)
 -{
 - while (*s)
 - arm_dcc_putc(*s++);
 -}
 -
  static int arm_dcc_tstc(void)
  {
   register unsigned int reg;
 @@ -148,7 +142,7 @@ static struct serial_device arm_dcc_drv = {
   .stop   = NULL,
   .setbrg = arm_dcc_setbrg,
   .putc   = arm_dcc_putc,
 - .puts   = arm_dcc_puts,
 + .puts   = default_serial_puts,
   .getc   = arm_dcc_getc,
   .tstc   = arm_dcc_tstc,
  };

Best regards,
Marek Vasut
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH] ARM: mxs: Add mx28evk_auart_console target

2013-08-18 Thread Marek Vasut 
Hi Andreas,

 Dear Marek
 
  I wonder, why dont you add support for the TQ SoM in the first place?
 
 I have plans to do it but I only have access to the board at work and
 I currently am very busy so have limited time testing the board setup, so I
 don't know when in time I will be able to submit such a patch.

Sucks, but ok.

Best regards,
Marek Vasut
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] Enable xmodem support

2013-08-18 Thread Tom Rini 
On Wed, Jun 26, 2013 at 04:54:24PM -0600, Angus Ainslie wrote:

 This is a trivial patch that just enables xmodem downloads using the existing
 ymodem framework.
 
 Signed-off-by: Angus Ainslie an...@akkea.ca

Applied to u-boot/master, thanks!

-- 
Tom


signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] SPL: Limit image name print length

2013-08-18 Thread Tom Rini 
On Tue, Jul 16, 2013 at 02:45:01PM +0300, Taras Kondratiuk wrote:

 If image name is longer than 32 bytes, then it will be truncated.
 This will remove '\0' at the end of the line, so printf will
 go out of string limit.
 
 Signed-off-by: Taras Kondratiuk ta...@ti.com
 Reviewed-by: Tom Rini tr...@ti.com

Applied to u-boot/master, thanks!

-- 
Tom


signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] Pull request: u-boot-arm/master -- from a temporary repository

2013-08-18 Thread Tom Rini 
On Sun, Aug 18, 2013 at 02:17:11PM +0200, Albert ARIBAUD wrote:

 Hello Tom,
 
 The following changes since commit
 aaf5e825606a70ddc8fca8e366d8c16a6fd3cc7c:
 
   Merge branch 'master' of git://git.denx.de/u-boot-nds32 (2013-07-25
   08:51:51 -0400)
 
 are available in the git repository at:
 
   git://88.191.163.10/u-boot-arm master
 
 for you to fetch changes up to 9ed887caecb9ecb0c68773a1870d143b9f28d3da:
 
   Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17
   18:24:13 +0200)
 
 
 
 Albert ARIBAUD (2):
   Merge branch 'u-boot/master' into u-boot-arm/master
   Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
 
 Andreas Bie??mann (1):
   omap3/sys_info: fix printout of OMAP36XX L3 freqency
 
 Ash Charles (1):
   omap: overo: Use 200MHz SDRC timings for revision 1, 2  3 boards
 
 Christian Riesch (1):
   da850evm: Use clrbits function with correct endianess
 
 Dan Murphy (2):
   gpio: tca642x: Add the tca642x gpio expander driver
   gpio: omap5-uevm: Configure the tca6424 gpio expander
 
 Dinh Nguyen (1):
   socfpga: Move board/socfpga_cyclone5 to board/socfpga
 
 Dirk Behme (1):
   mxc_gpio: Correct the GPIO handling in gpio_direction_output()
 
 Enric Balletbo i Serra (5):
   ARM: IGEP0033: Remove undef of CONFIG_CMD_MEMTEST
   ARM: IGEP0033: Remove CYGNUS name from header.
   ARM: IGEP0033: Add support to boot from NAND.
   ARM: IGEP0033: Remove duplicate / unused #defines.
   ARM: igep00x0.h: Enable the use of CMD_EXT4, CMD_FS_GENERIC and
 zImage.
 
 Enric Balletb?? i Serra (1):
   ARM: IGEP0033: Add support for Flattened Device Tree.
 
 Eric Nelson (1):
   mxc_ipuv3: fix memory alignment of framebuffer
 
 Fabio Estevam (1):
   mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x
 
 Heiko Schocher (6):
   net, phy, cpsw: fix gigabit register access
   ARM: AM33xx: Move s_init to a common place
   arm/davinci/da850: add uart0_pins_rtscts and RMII_MHz_50_CLK in
 emac_pins_rmii pinmux bootstage: get more BOOTSTAGE_ID* in
 show_boot_progress() arm, da850: enable the correct uart in
 arch_cpu_init() arm, da850: add ipam390 board support
 
 Javier Martinez Canillas (1):
   OMAP3: igep00x0: allow booting with a FDT from MMC
 
 Justin Waters (6):
   am335x_evm: Make NAND support modular
   am335x_evm: Add command line editing
   am335x_evm: Rework bootcmd to handle two MMC devs
   Add additional MLO images to .gitignore
   am335x_evm: Add support for eMMC environment
   am335x_evm: Add am335x_boneblack variant
 
 Lokesh Vutla (10):
   ARM: DRA7xx: Lock DPLL_GMAC
   ARM: AM33xx: Cleanup dplls data
   ARM: AM33xx: Cleanup clocks layer
   musb: Disable extra prints
   ARM: AM43xx: Add Board files
   ARM: AM43xx: Add header files
   ARM: AM43xx: clocks: Add dpll and clock data
   ARM: OMAP: Add CONFIG_OMAP_COMMON
   ARM: AM43xx: Add build support
   ARM: AM43xx: Add config file
 
 Marek Vasut (1):
   ARM: mxs: Consolidate configuration options
 
 Masahiro Yamada (1):
   ARM: omap24xx: remove remainders of dead board
 
 Mugunthan V N (6):
   drivers: net: cpsw: remove hard coding bd ram for cpsw
   drivers: net: cpsw: Enable statistics for all port
   ARM: DRA7xx: Enable GMAC clock control
   ARM: DRA7xx: Add CPSW support to DRA7xx EVM
   ARM: DRA7xx: Add CPSW and MDIO pinmux support
   ARM: DRA7xx: Enable CPSW Ethernet support
 
 Naumann Andreas (1):
   ARM: omap3: Implement dpll5 (HSUSB clk) workaround for
 OMAP36xx/AM/DM37xx according to errata sprz318e.
 
 Nishanth Menon (6):
   omap3_beagle: remove JFFS2 support.
   omap3_beagle: replace uImage.beagle with generic uImage
   beagleboard: remove RevB support for BeagleBoard Xm
   omap3_beagle: enable CMD_FS_GENERIC and simplify load of
 image/ramdisk omap3_beagle: support findfdt and loadfdt for devicetree
 support omap3_beagle: support booting from zImage and device tree as
 last option
 
 Otavio Salvador (1):
   wandboard: Use splash image at screen center by default
 
 Pardeep Kumar Singla (2):
   mx6: Factor out common HDMI setup code
   mx6qsabresd: Add splash screen support via HDMI
 
 Rob Herring (10):
   ARM: move interrupt_init to before relocation
   net: calxedaxgmac: enable rx cut-thru
   ARM: highbank: update config options
   ARM: highbank: fix get_tbclk value to timer rate
   ARM: highbank: set timer prescaler to 256
   ARM: highbank: avoid bss write in timer_init
   ARM: highbank: enable reset on command timeout
   ARM: highbank: setup peripherals based on power domain status
   ARM: highbank: compile misc_init_r only if CONFIG_MISC_INIT_R
   highbank: enable keyed autoboot stop
 
 Robert Winkler (2):
   imx: Add documentation for imx specific commands
   imx: nitrogen6x: mx6qsabrelite:

Re: [U-Boot] gpio: pca953x: Use ARRAY_SIZE instead of reinventing it

2013-08-18 Thread Tom Rini 
On Sat, Jun 22, 2013 at 06:22:48PM +0800, Axel Lin wrote:

 Signed-off-by: Axel Lin axel@ingics.com
 Reviewed-by: Thierry Reding thierry.red...@gmail.com
 Acked-by: Marek Vasut ma...@denx.de
 
 ---
 drivers/gpio/pca953x.c | 5 +
  1 file changed, 1 insertion(+), 4 deletions(-)

Applied to u-boot/master, thanks!

-- 
Tom


signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [U-Boot, 3/3] image: Display FIT timestamp when booting

2013-08-18 Thread Tom Rini 
On Tue, Jul 16, 2013 at 08:10:01PM -0700, Simon Glass wrote:

 The timestamp is shown in fit_print_contents() but for some reason not
 in fit_image_print(). This seems to be an oversight, since it is the latter
 which is used by bootm.
 
 Add timestamp printing in this case.
 
 (There is code duplication in these two function, for looking at in a future
 patch).
 
 Signed-off-by: Simon Glass s...@chromium.org

Applied to u-boot/master, thanks!

-- 
Tom


signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [U-Boot, 2/3] RFC: bootm: Add silent_linux environment variable

2013-08-18 Thread Tom Rini 
On Tue, Jul 16, 2013 at 08:10:00PM -0700, Simon Glass wrote:

 At present the console for linux is silent if the U-Boot console is silent,
 unless CONFIG_SILENT_U_BOOT_ONLY is set. I wonder if a better way would be
 to have an environment variable to control this? Then we can control the
 verbosity from scripts, and set the variable to 'no' for those boards that
 want Linux to boot with console output.
 
 Signed-off-by: Simon Glass s...@chromium.org

Applied to u-boot/master, thanks!

-- 
Tom


signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] bootm: fix conditional controlling call to fixup_silent_linux

2013-08-18 Thread Tom Rini 
On Sat, Aug 03, 2013 at 09:29:09PM -0700, Paul B. Henson wrote:

 This function is only defined if CONFIG_SILENT_CONSOLE is set and
 CONFIG_SILENT_U_BOOT_ONLY is not set, the call to it should be based
 on the same conditions.
 
 Signed-off-by: Paul B. Henson hen...@acm.org
 Acked-by: Simon Glass s...@chromium.org

Applied to u-boot/master, thanks!

-- 
Tom


signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] tools/Makefile: Move _GNU_SOURCE to Makefile

2013-08-18 Thread Tom Rini 
On Tue, Jul 30, 2013 at 03:26:11PM -0700, York Sun wrote:

 Commit 669dfc2e adds libfdt_env.h to HOSTCPPFLAGS. It causes stdio.h
 to be included before _GNU_SOURCE is defined in C files. On some old hosts
 some prototypes are protected by #ifdef __USE_GNU, which is set when
 _GNU_SOURCE is defined.
 
 Signed-off-by: York Sun york...@freescale.com
 Acked-by: Simon Glass s...@chromium.org

Applied to u-boot/master, thanks!

-- 
Tom


signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH V2] Origen: Set FIMD as the default display path

2013-08-18 Thread Donghwa Lee 
On Fri, Aug 16, 2013 at 16:31, Ajay kumar wrote:
 On Thu, Aug 15, 2013 at 6:53 PM, Tushar Behera tushar.beh...@linaro.org 
 mailto:tushar.beh...@linaro.org wrote:

 On EXYNOS4210, there are three paths for display data to be processed,
 namely MIE, MDNIE and FIMD. On Origen board, FIMD display controller
 is used.

 Signed-off-by: Tushar Behera tushar.beh...@linaro.org 
 mailto:tushar.beh...@linaro.org
 ---
 Changes for V2:
 * Updated review comments from Ajay Kumar, reusing the code from
 arch/arm/cpu/armv7/exynos/system.c.

  board/samsung/origen/origen.c |3 +++
  1 file changed, 3 insertions(+)

 diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
 index 15f77ca..bb16699 100644
 --- a/board/samsung/origen/origen.c
 +++ b/board/samsung/origen/origen.c
 @@ -22,6 +22,9 @@ int board_init(void)
 gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;

 gd-bd-bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
 +
 +   set_system_display_ctrl();
 +

 Ok. You are trying to get the display up in the kernel,
 without enabling the display in u-boot.
 And, thats why you are making an explicit call here?

Previously, Ajay kumar said set_system_display_ctrl() function is already 
called by
lcd_ctrl_init() of exynos_fb.c.
If you need to use FIMD path, you'd better use the existing one.

 return 0;
  }

 --
 1.7.9.5



___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH] net: macb: fix the following building warning

2013-08-18 Thread Bo Shen 
fix the following building warning
---8---
macb.c: In function 'macb_init':
macb.c:400:14: warning: 'phydev' may be used uninitialized in this function
macb.c:377:21: note: 'phydev' was declared here
---8---

Signed-off-by: Bo Shen voice.s...@atmel.com

---
 drivers/net/macb.c |   12 +---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 1f7cc32..bf3983a 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -36,6 +36,7 @@
 #include asm/io.h
 #include asm/dma-mapping.h
 #include asm/arch/clk.h
+#include asm-generic/errno.h
 
 #include macb.h
 
@@ -397,9 +398,14 @@ static int macb_phy_init(struct macb_device *macb)
}
 
 #ifdef CONFIG_PHYLIB
-   phydev-bus = macb-bus;
-   phydev-dev = netdev;
-   phydev-addr = macb-phy_addr;
+   /* need to consider other phy interface mode */
+   phydev = phy_connect(macb-bus, macb-phy_addr, netdev,
+PHY_INTERFACE_MODE_RGMII);
+   if (!phydev) {
+   printf(phy_connect failed\n);
+   return -ENODEV;
+   }
+
phy_config(phydev);
 #endif
 
-- 
1.7.9.5

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH V2] Origen: Set FIMD as the default display path

2013-08-18 Thread Tushar Behera 
On 19 August 2013 07:22, Donghwa Lee dh09@samsung.com wrote:
 On Fri, Aug 16, 2013 at 16:31, Ajay kumar wrote:

 On Thu, Aug 15, 2013 at 6:53 PM, Tushar Behera tushar.beh...@linaro.org
 wrote:

 On EXYNOS4210, there are three paths for display data to be processed,
 namely MIE, MDNIE and FIMD. On Origen board, FIMD display controller
 is used.

 Signed-off-by: Tushar Behera tushar.beh...@linaro.org
 ---
 Changes for V2:
 * Updated review comments from Ajay Kumar, reusing the code from
 arch/arm/cpu/armv7/exynos/system.c.

  board/samsung/origen/origen.c |3 +++
  1 file changed, 3 insertions(+)

 diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
 index 15f77ca..bb16699 100644
 --- a/board/samsung/origen/origen.c
 +++ b/board/samsung/origen/origen.c
 @@ -22,6 +22,9 @@ int board_init(void)
 gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;

 gd-bd-bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
 +
 +   set_system_display_ctrl();
 +

 Ok. You are trying to get the display up in the kernel,
 without enabling the display in u-boot.
 And, thats why you are making an explicit call here?


Yes, as of now, I don't want LCD support in u-boot, but I want to just
enable the display path.

 Previously, Ajay kumar said set_system_display_ctrl() function is already
 called by
 lcd_ctrl_init() of exynos_fb.c.
 If you need to use FIMD path, you'd better use the existing one.

I tried enabling CONFIG_LCD and related config options so that
existing display path in u-boot is called. That somehow stalls the
u-boot and I didn't want to pursue that much as calling this function
fixes my issue.


 return 0;
  }

 --
 1.7.9.5






-- 
Tushar Behera
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH v2 3/4] ARM: use r9 for gd

2013-08-18 Thread Simon Glass 
Hi Jeroen,

On Sat, Aug 17, 2013 at 3:40 AM, Jeroen Hofstee jer...@myspectrum.nl wrote:
 On 08/14/2013 08:25 PM, Jeroen Hofstee wrote:

 To be more EABI compliant and as a preparation for building
 with clang, use the platform-specific r9 register for gd
 instead of r8.

 note: The FIQ is not updated since it is not used in u-boot,
 and under discussion for the time being.

 The following checkpatch warning is ignored:
 WARNING: Use of volatile is usually wrong: see
 Documentation/volatile-considered-harmful.txt

 cc: Albert ARIBAUD albert.u.b...@aribaud.net
 Signed-off-by: Jeroen Hofstee jer...@myspectrum.nl
 ---
   arch/arm/config.mk |  2 +-
   arch/arm/include/asm/global_data.h |  2 +-
   arch/arm/lib/crt0.S| 16 
   3 files changed, 10 insertions(+), 10 deletions(-)


 This patch assumes only crt0.S sets the register used for
 gd in asm. I just noticed cpu/armv7/lowlevel_init.S does set gd
 manually, so all users of the common board.c are likely
 bricked with the patch as is. Looking into it

I may misunderstood what you are saying here, but I believe that the
code in common/board_f.c which creates a global_data on the stack can
be removed for ARM now that Albert has tidied all this up with the
crt0.S changes, etc. So in common/board_f.c something like:

void board_init_f(ulong boot_flags)
{
/* These two archs set up the global_data before board_init_f() */
#if !defined(CONFIG_X86)  !defined(CONFIG_ARM)
gd_t data;

gd = data;
#endif

gd-flags = boot_flags;


Regards,
Simon
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH V2] Origen: Set FIMD as the default display path

2013-08-18 Thread Donghwa Lee 
On 2013년 08월 19일 12:06, Tushar Behera wrote:
 On 19 August 2013 07:22, Donghwa Lee dh09@samsung.com wrote:
 On Fri, Aug 16, 2013 at 16:31, Ajay kumar wrote:

 On Thu, Aug 15, 2013 at 6:53 PM, Tushar Behera tushar.beh...@linaro.org
 wrote:
 On EXYNOS4210, there are three paths for display data to be processed,
 namely MIE, MDNIE and FIMD. On Origen board, FIMD display controller
 is used.

 Signed-off-by: Tushar Behera tushar.beh...@linaro.org
 ---
 Changes for V2:
 * Updated review comments from Ajay Kumar, reusing the code from
 arch/arm/cpu/armv7/exynos/system.c.

  board/samsung/origen/origen.c |3 +++
  1 file changed, 3 insertions(+)

 diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
 index 15f77ca..bb16699 100644
 --- a/board/samsung/origen/origen.c
 +++ b/board/samsung/origen/origen.c
 @@ -22,6 +22,9 @@ int board_init(void)
 gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;

 gd-bd-bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
 +
 +   set_system_display_ctrl();
 +
 Ok. You are trying to get the display up in the kernel,
 without enabling the display in u-boot.
 And, thats why you are making an explicit call here?

 Yes, as of now, I don't want LCD support in u-boot, but I want to just
 enable the display path.


If you don't need to LCD support in u-boot, which case do you need to enable 
the display path to FIMD?

 Previously, Ajay kumar said set_system_display_ctrl() function is already
 called by
 lcd_ctrl_init() of exynos_fb.c.
 If you need to use FIMD path, you'd better use the existing one.
 I tried enabling CONFIG_LCD and related config options so that
 existing display path in u-boot is called. That somehow stalls the
 u-boot and I didn't want to pursue that much as calling this function
 fixes my issue.

 return 0;
  }

 --
 1.7.9.5





___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH] serial: arm_dcc: Convert to use default_serial_puts

2013-08-18 Thread Michal Simek 
On 08/18/2013 10:19 PM, Marek Vasut wrote:
 Dear Axel Lin,
 
 Use default_serial_puts() instead of its own implementation.

 Signed-off-by: Axel Lin axel@ingics.com
 
 Thanks,
 
 Acked-by: Marek Vasut ma...@denx.de

Ah yeah.

Acked-by: Michal Simek mon...@monstr.eu

Tom: Can you please apply this patch directly to your tree?

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform




signature.asc
Description: OpenPGP digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot