Hi,
From: s...@google.com s...@google.com on behalf of Simon Glass
s...@chromium.org
Sent: Wednesday, December 3, 2014 9:36 AM
To: Pavel Machek
Cc: Matthew Gerlach; u-boot@lists.denx.de
Subject: Re: [U-Boot] RFC Pin Configuration Device Tree Bindings for Altera
Arria10 SOCFPGA
Hi,
On 3 December 2014 at 06:48, Pavel Machek pa...@ucw.cz wrote:
Hi!
Altera Arria10 SOCFPGA Pin Configuration Bindings
This document describes device tree bindings required to perform
configuration
of the pins for an Altera Arria10 SOCFPGA . The bindings are intended to
be compact and easy to be consumed only by a SPL running in a small on-chip
ram before external memory is available. The Arria10 SOCFPGA does not
support
dynamic modification of the pin configuration.
Each set of pins is represented by its own subnode. For each subnode, the
altr,pinmux-regs data will be written to sequential 32 bit addresses starting
at the address in the reg property.
These bindings will be incompatible with pin muxing on rest of
systems, right?
The pin muxing for the Arria 10 is completely different than the
Cyclone5/Arria5 chip family.
Do we really want to parse DT in SPL? Should we parse the DT during
build for the SPL?
Pavel
The on-chip ram for the Arria10 is 256k. We are hoping to have fewer SPL
binaries and use device trees for configuration.
Required properties:
- compatible : Must be altr,arria10-pinmux for Arria10 SOCFPGA
- one subnode for each set of pins to be configured
Required subnode properties:
- reg : The start address to write pinmux-data as 32 bit quantities and the
number of bytes of registers to be written.
- altr,pinmux-regs : Pin configuration data to be written to registers
Example:
pinmux@0xffd07000 {
#address-cells = 1;
#size-cells = 0;
compatible = altr,arria10-pinmux;
shared {
reg = 0xffd07000 0x00c0;
altr,pinmux-regs = 0xF 0xF 0xF 0xF 0xF 0xF 0xF 0xF 0xF 0xF
0xF 0xF 0xF 0xF 0xF 0xF 0xF 0xF 0xF 0xF
0xD 0xD 0xD 0xD 0xD 0xD 0xD 0xD 0xF 0xF
0xF 0xF 0xF 0xF 0xF 0xF 0xF 0xF 0xF 0xF
0xF 0xF 0xF 0xF 0xF 0xF 0xF 0xF;
};
dedicated {
reg = 0xffd07200 0x0044;
altr,pinmux-regs = 0x0 0x0 0x0 0x8 0x8 0x8 0x8 0x8 0x8 0x8
0xF 0xF 0xF 0xF 0xF 0xD 0xD;
};
dedicated_cfg {
reg = 0xffd07300 0x0048;
altr,pinmux-regs = 0x0 0x51010 0x51010 0x51010 0x40605
0x40605 0x00605 0x40605 0x40605 0x40605
0x10605 0x51010 0x51010 0x51010 0x51010
0x51010 0x03030 0x23030;
};
fpga {
reg = 0xffd07400 0x0044;
altr,pinmux-regs = 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0;
};
};
Does this match the kernel? Or does the kernel have no such binding yet?
There are no such bindings in the kernel yet. Dynamic pinmuxing is not
supported by the Arria 10; so we don't anticipate the kernel needing pinmux
information.
We can support this in SPL if required.
Our prototyping is currently doing some device tree parsing.
Regards,
Simon
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
