The GW73xx baseboard needs a PCI dt adjustment for revC/D based on a
change of the PCIe switch. Make sure we are only doing this for a pci
based ethernet to avoid causing a boot hang when the ethernet1 alias
points to eqos or fec. To know this is a pcie device ensure the alias
begins with the pcie controller.
Signed-off-by: Tim Harvey
---
board/gateworks/venice/venice.c | 7 ---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/board/gateworks/venice/venice.c b/board/gateworks/venice/venice.c
index f54f1186b686..5b105d7659e4 100644
--- a/board/gateworks/venice/venice.c
+++ b/board/gateworks/venice/venice.c
@@ -230,6 +230,7 @@ uint mmc_get_env_part(struct mmc *mmc)
int ft_board_setup(void *fdt, struct bd_info *bd)
{
const char *base_model = eeprom_get_baseboard_model();
+ const char *path;
char pcbrev;
int off;
@@ -238,10 +239,10 @@ int ft_board_setup(void *fdt, struct bd_info *bd)
if (!strncmp(base_model, "GW73", 4)) {
pcbrev = get_pcb_rev(base_model);
+ path = fdt_get_alias(fdt, "ethernet1");
- if (pcbrev > 'B' && pcbrev < 'E') {
- printf("adjusting dt for %s\n", base_model);
-
+ if (pcbrev > 'B' && pcbrev < 'E' && path && !strncmp(path,
"/soc@0/pcie@", 12)) {
+ printf("adjusting %s pcie\n", base_model);
/*
* revC/D/E has PCIe 4-port switch which changes
* ethernet1 PCIe GbE:
--
2.25.1
