On Tue, Aug 02, 2022 at 07:33:41AM -0400, Tom Rini wrote:
> This platform needs to be converted to use DM_ETH as the deadline is 2
> years passed due. Disable networking support for now.
Oh well, my bad. There are too many patches accumulated.
Please see bellow for original version for reference (applied
after this one is reverted) Alternatively I can rebase on current
master, just let me know whichever way you prefer.
ladis
> Cc: Enric Balletbo i Serra
> Signed-off-by: Tom Rini
> ---
> board/isee/igep00x0/igep00x0.c | 58 --
> configs/igep00x0_defconfig | 5 +--
> 2 files changed, 1 insertion(+), 62 deletions(-)
>
> diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
> index 0932f62b9beb..6c5e6fbbcb0d 100644
> --- a/board/isee/igep00x0/igep00x0.c
> +++ b/board/isee/igep00x0/igep00x0.c
> @@ -88,62 +88,6 @@ int onenand_board_init(struct mtd_info *mtd)
> return 1;
> }
>
> -#if defined(CONFIG_CMD_NET)
> -static void reset_net_chip(int gpio)
> -{
> - if (!gpio_request(gpio, "eth nrst")) {
> - gpio_direction_output(gpio, 1);
> - udelay(1);
> - gpio_set_value(gpio, 0);
> - udelay(40);
> - gpio_set_value(gpio, 1);
> - mdelay(10);
> - }
> -}
> -
> -/*
> - * Routine: setup_net_chip
> - * Description: Setting up the configuration GPMC registers specific to the
> - * Ethernet hardware.
> - */
> -static void setup_net_chip(void)
> -{
> - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
> - static const u32 gpmc_lan_config[] = {
> - NET_LAN9221_GPMC_CONFIG1,
> - NET_LAN9221_GPMC_CONFIG2,
> - NET_LAN9221_GPMC_CONFIG3,
> - NET_LAN9221_GPMC_CONFIG4,
> - NET_LAN9221_GPMC_CONFIG5,
> - NET_LAN9221_GPMC_CONFIG6,
> - };
> -
> - enable_gpmc_cs_config(gpmc_lan_config, _cfg->cs[5],
> - CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
> -
> - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
> - writew(readw(_base->gpmc_nwe) | 0x0E00, _base->gpmc_nwe);
> - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
> - writew(readw(_base->gpmc_noe) | 0x0E00, _base->gpmc_noe);
> - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
> - writew(readw(_base->gpmc_nadv_ale) | 0x0E00,
> - _base->gpmc_nadv_ale);
> -
> - reset_net_chip(64);
> -}
> -
> -int board_eth_init(struct bd_info *bis)
> -{
> -#ifdef CONFIG_SMC911X
> - return smc911x_initialize(0, CONFIG_SMC911X_BASE);
> -#else
> - return 0;
> -#endif
> -}
> -#else
> -static inline void setup_net_chip(void) {}
> -#endif
> -
> #ifdef CONFIG_OF_BOARD_SETUP
> static int ft_enable_by_compatible(void *blob, char *compat, int enable)
> {
> @@ -234,8 +178,6 @@ int misc_init_r(void)
>OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ,
>OMAP34XX_CTRL_WKUP_CTRL);
>
> - setup_net_chip();
> -
> omap_die_id_display();
>
> set_led();
> diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
> index 17c97ac27f79..25eda11dd45e 100644
> --- a/configs/igep00x0_defconfig
> +++ b/configs/igep00x0_defconfig
> @@ -67,7 +67,7 @@ CONFIG_ENV_UBI_VOLUME="config"
> CONFIG_ENV_UBI_VOLUME_REDUND="config_r"
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> CONFIG_VERSION_VARIABLE=y
> -CONFIG_NET_RANDOM_ETHADDR=y
> +# CONFIG_NET is not set
> CONFIG_SYS_I2C_LEGACY=y
> CONFIG_SPL_SYS_I2C_LEGACY=y
> CONFIG_MMC_OMAP_HS=y
> @@ -81,9 +81,6 @@ CONFIG_SYS_NAND_PAGE_SIZE=0x800
> CONFIG_SYS_NAND_OOBSIZE=0x40
> CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> CONFIG_MTD_UBI_FASTMAP=y
> -CONFIG_SMC911X=y
> -CONFIG_SMC911X_BASE=0x2C00
> -CONFIG_SMC911X_32_BIT=y
> CONFIG_CONS_INDEX=3
> CONFIG_SPI=y
> CONFIG_DM_SPI=y
> --
> 2.25.1
From: Ladislav Michl
Date: Tue, 5 Apr 2022 15:47:45 +0200
Subject: [PATCH] ARM: igep00x0: convert to DM_ETH
The GPMC bus hasn't been converted, so omap3-igep0020-u-boot.dtsi needs
to provide the address of the ethernet controller.
Signed-off-by: Ladislav Michl
---
arch/arm/dts/omap3-igep0020-u-boot.dtsi | 12
board/isee/igep00x0/igep00x0.c | 12 +---
configs/igep00x0_defconfig | 2 +-
3 files changed, 14 insertions(+), 12 deletions(-)
diff --git a/arch/arm/dts/omap3-igep0020-u-boot.dtsi
b/arch/arm/dts/omap3-igep0020-u-boot.dtsi
index 41beaf0900..d418b6a79f 100644
--- a/arch/arm/dts/omap3-igep0020-u-boot.dtsi
+++ b/arch/arm/dts/omap3-igep0020-u-boot.dtsi
@@ -9,6 +9,18 @@
chosen {
stdout-path =
};
+
+ ethernet@2c00 {
+ compatible = "smsc,lan9221","smsc,lan9115";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2c00 0xff>;
+ bank-width = <2>;
+ vddvario-supply = <>;
+